| /* | |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 2 Clause License and | |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | |
| * was not distributed with this source code in the LICENSE file, you can | |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open | |
| * Media Patent License 1.0 was not distributed with this source code in the | |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | |
| */ | |
| #include "./aom_config.h" | |
| #include "aom_dsp/aom_dsp_common.h" | |
| #include "aom_mem/aom_mem.h" | |
| #include "av1/common/entropymode.h" | |
| #include "av1/common/thread_common.h" | |
| #include "av1/common/reconinter.h" | |
| #if CONFIG_MULTITHREAD | |
| static INLINE void mutex_lock(pthread_mutex_t *const mutex) { | |
| const int kMaxTryLocks = 4000; | |
| int locked = 0; | |
| int i; | |
| for (i = 0; i < kMaxTryLocks; ++i) { | |
| if (!pthread_mutex_trylock(mutex)) { | |
| locked = 1; | |
| break; | |
| } | |
| } | |
| if (!locked) pthread_mutex_lock(mutex); | |
| } | |
| #endif // CONFIG_MULTITHREAD | |
| static INLINE void sync_read(AV1LfSync *const lf_sync, int r, int c) { | |
| #if CONFIG_MULTITHREAD | |
| const int nsync = lf_sync->sync_range; | |
| if (r && !(c & (nsync - 1))) { | |
| pthread_mutex_t *const mutex = &lf_sync->mutex_[r - 1]; | |
| mutex_lock(mutex); | |
| while (c > lf_sync->cur_sb_col[r - 1] - nsync) { | |
| pthread_cond_wait(&lf_sync->cond_[r - 1], mutex); | |
| } | |
| pthread_mutex_unlock(mutex); | |
| } | |
| #else | |
| (void)lf_sync; | |
| (void)r; | |
| (void)c; | |
| #endif // CONFIG_MULTITHREAD | |
| } | |
| static INLINE void sync_write(AV1LfSync *const lf_sync, int r, int c, | |
| const int sb_cols) { | |
| #if CONFIG_MULTITHREAD | |
| const int nsync = lf_sync->sync_range; | |
| int cur; | |
| // Only signal when there are enough filtered SB for next row to run. | |
| int sig = 1; | |
| if (c < sb_cols - 1) { | |
| cur = c; | |
| if (c % nsync) sig = 0; | |
| } else { | |
| cur = sb_cols + nsync; | |
| } | |
| if (sig) { | |
| mutex_lock(&lf_sync->mutex_[r]); | |
| lf_sync->cur_sb_col[r] = cur; | |
| pthread_cond_signal(&lf_sync->cond_[r]); | |
| pthread_mutex_unlock(&lf_sync->mutex_[r]); | |
| } | |
| #else | |
| (void)lf_sync; | |
| (void)r; | |
| (void)c; | |
| (void)sb_cols; | |
| #endif // CONFIG_MULTITHREAD | |
| } | |
| #if !CONFIG_EXT_PARTITION_TYPES | |
| static INLINE enum lf_path get_loop_filter_path( | |
| int y_only, struct macroblockd_plane planes[MAX_MB_PLANE]) { | |
| if (y_only) | |
| return LF_PATH_444; | |
| else if (planes[1].subsampling_y == 1 && planes[1].subsampling_x == 1) | |
| return LF_PATH_420; | |
| else if (planes[1].subsampling_y == 0 && planes[1].subsampling_x == 0) | |
| return LF_PATH_444; | |
| else | |
| return LF_PATH_SLOW; | |
| } | |
| static INLINE void loop_filter_block_plane_ver( | |
| AV1_COMMON *cm, struct macroblockd_plane planes[MAX_MB_PLANE], int plane, | |
| MODE_INFO **mi, int mi_row, int mi_col, enum lf_path path, | |
| LOOP_FILTER_MASK *lfm) { | |
| if (plane == 0) { | |
| av1_filter_block_plane_ss00_ver(cm, &planes[0], mi_row, lfm); | |
| } else { | |
| switch (path) { | |
| case LF_PATH_420: | |
| av1_filter_block_plane_ss11_ver(cm, &planes[plane], mi_row, lfm); | |
| break; | |
| case LF_PATH_444: | |
| av1_filter_block_plane_ss00_ver(cm, &planes[plane], mi_row, lfm); | |
| break; | |
| case LF_PATH_SLOW: | |
| av1_filter_block_plane_non420_ver(cm, &planes[plane], mi, mi_row, | |
| mi_col, plane); | |
| break; | |
| } | |
| } | |
| } | |
| static INLINE void loop_filter_block_plane_hor( | |
| AV1_COMMON *cm, struct macroblockd_plane planes[MAX_MB_PLANE], int plane, | |
| MODE_INFO **mi, int mi_row, int mi_col, enum lf_path path, | |
| LOOP_FILTER_MASK *lfm) { | |
| if (plane == 0) { | |
| av1_filter_block_plane_ss00_hor(cm, &planes[0], mi_row, lfm); | |
| } else { | |
| switch (path) { | |
| case LF_PATH_420: | |
| av1_filter_block_plane_ss11_hor(cm, &planes[plane], mi_row, lfm); | |
| break; | |
| case LF_PATH_444: | |
| av1_filter_block_plane_ss00_hor(cm, &planes[plane], mi_row, lfm); | |
| break; | |
| case LF_PATH_SLOW: | |
| av1_filter_block_plane_non420_hor(cm, &planes[plane], mi, mi_row, | |
| mi_col, plane); | |
| break; | |
| } | |
| } | |
| } | |
| #endif | |
| // Row-based multi-threaded loopfilter hook | |
| #if CONFIG_PARALLEL_DEBLOCKING | |
| static int loop_filter_ver_row_worker(AV1LfSync *const lf_sync, | |
| LFWorkerData *const lf_data) { | |
| const int num_planes = lf_data->y_only ? 1 : MAX_MB_PLANE; | |
| int mi_row, mi_col; | |
| #if !CONFIG_EXT_PARTITION_TYPES | |
| enum lf_path path = get_loop_filter_path(lf_data->y_only, lf_data->planes); | |
| #endif | |
| for (mi_row = lf_data->start; mi_row < lf_data->stop; | |
| mi_row += lf_sync->num_workers * lf_data->cm->mib_size) { | |
| MODE_INFO **const mi = | |
| lf_data->cm->mi_grid_visible + mi_row * lf_data->cm->mi_stride; | |
| for (mi_col = 0; mi_col < lf_data->cm->mi_cols; | |
| mi_col += lf_data->cm->mib_size) { | |
| LOOP_FILTER_MASK lfm; | |
| int plane; | |
| av1_setup_dst_planes(lf_data->planes, lf_data->cm->sb_size, | |
| lf_data->frame_buffer, mi_row, mi_col); | |
| av1_setup_mask(lf_data->cm, mi_row, mi_col, mi + mi_col, | |
| lf_data->cm->mi_stride, &lfm); | |
| #if CONFIG_EXT_PARTITION_TYPES | |
| for (plane = 0; plane < num_planes; ++plane) | |
| av1_filter_block_plane_non420_ver(lf_data->cm, &lf_data->planes[plane], | |
| mi + mi_col, mi_row, mi_col, plane); | |
| #else | |
| for (plane = 0; plane < num_planes; ++plane) | |
| loop_filter_block_plane_ver(lf_data->cm, lf_data->planes, plane, | |
| mi + mi_col, mi_row, mi_col, path, &lfm); | |
| #endif | |
| } | |
| } | |
| return 1; | |
| } | |
| static int loop_filter_hor_row_worker(AV1LfSync *const lf_sync, | |
| LFWorkerData *const lf_data) { | |
| const int num_planes = lf_data->y_only ? 1 : MAX_MB_PLANE; | |
| const int sb_cols = | |
| mi_cols_aligned_to_sb(lf_data->cm) >> lf_data->cm->mib_size_log2; | |
| int mi_row, mi_col; | |
| #if !CONFIG_EXT_PARTITION_TYPES | |
| enum lf_path path = get_loop_filter_path(lf_data->y_only, lf_data->planes); | |
| #endif | |
| for (mi_row = lf_data->start; mi_row < lf_data->stop; | |
| mi_row += lf_sync->num_workers * lf_data->cm->mib_size) { | |
| MODE_INFO **const mi = | |
| lf_data->cm->mi_grid_visible + mi_row * lf_data->cm->mi_stride; | |
| for (mi_col = 0; mi_col < lf_data->cm->mi_cols; | |
| mi_col += lf_data->cm->mib_size) { | |
| const int r = mi_row >> lf_data->cm->mib_size_log2; | |
| const int c = mi_col >> lf_data->cm->mib_size_log2; | |
| LOOP_FILTER_MASK lfm; | |
| int plane; | |
| // TODO(wenhao.zhang@intel.com): For better parallelization, reorder | |
| // the outer loop to column-based and remove the synchronizations here. | |
| sync_read(lf_sync, r, c); | |
| av1_setup_dst_planes(lf_data->planes, lf_data->cm->sb_size, | |
| lf_data->frame_buffer, mi_row, mi_col); | |
| av1_setup_mask(lf_data->cm, mi_row, mi_col, mi + mi_col, | |
| lf_data->cm->mi_stride, &lfm); | |
| #if CONFIG_EXT_PARTITION_TYPES | |
| for (plane = 0; plane < num_planes; ++plane) | |
| av1_filter_block_plane_non420_hor(lf_data->cm, &lf_data->planes[plane], | |
| mi + mi_col, mi_row, mi_col, plane); | |
| #else | |
| for (plane = 0; plane < num_planes; ++plane) | |
| loop_filter_block_plane_hor(lf_data->cm, lf_data->planes, plane, | |
| mi + mi_col, mi_row, mi_col, path, &lfm); | |
| #endif | |
| sync_write(lf_sync, r, c, sb_cols); | |
| } | |
| } | |
| return 1; | |
| } | |
| #else // CONFIG_PARALLEL_DEBLOCKING | |
| static int loop_filter_row_worker(AV1LfSync *const lf_sync, | |
| LFWorkerData *const lf_data) { | |
| const int num_planes = lf_data->y_only ? 1 : MAX_MB_PLANE; | |
| const int sb_cols = | |
| mi_cols_aligned_to_sb(lf_data->cm) >> lf_data->cm->mib_size_log2; | |
| int mi_row, mi_col; | |
| #if !CONFIG_EXT_PARTITION_TYPES | |
| enum lf_path path = get_loop_filter_path(lf_data->y_only, lf_data->planes); | |
| #endif // !CONFIG_EXT_PARTITION_TYPES | |
| #if CONFIG_EXT_PARTITION | |
| printf( | |
| "STOPPING: This code has not been modified to work with the " | |
| "extended coding unit size experiment"); | |
| exit(EXIT_FAILURE); | |
| #endif // CONFIG_EXT_PARTITION | |
| for (mi_row = lf_data->start; mi_row < lf_data->stop; | |
| mi_row += lf_sync->num_workers * lf_data->cm->mib_size) { | |
| MODE_INFO **const mi = | |
| lf_data->cm->mi_grid_visible + mi_row * lf_data->cm->mi_stride; | |
| for (mi_col = 0; mi_col < lf_data->cm->mi_cols; | |
| mi_col += lf_data->cm->mib_size) { | |
| const int r = mi_row >> lf_data->cm->mib_size_log2; | |
| const int c = mi_col >> lf_data->cm->mib_size_log2; | |
| #if !CONFIG_EXT_PARTITION_TYPES | |
| LOOP_FILTER_MASK lfm; | |
| #endif | |
| int plane; | |
| sync_read(lf_sync, r, c); | |
| av1_setup_dst_planes(lf_data->planes, lf_data->cm->sb_size, | |
| lf_data->frame_buffer, mi_row, mi_col); | |
| #if CONFIG_EXT_PARTITION_TYPES | |
| for (plane = 0; plane < num_planes; ++plane) { | |
| av1_filter_block_plane_non420_ver(lf_data->cm, &lf_data->planes[plane], | |
| mi + mi_col, mi_row, mi_col, plane); | |
| av1_filter_block_plane_non420_hor(lf_data->cm, &lf_data->planes[plane], | |
| mi + mi_col, mi_row, mi_col, plane); | |
| } | |
| #else | |
| av1_setup_mask(lf_data->cm, mi_row, mi_col, mi + mi_col, | |
| lf_data->cm->mi_stride, &lfm); | |
| for (plane = 0; plane < num_planes; ++plane) { | |
| loop_filter_block_plane_ver(lf_data->cm, lf_data->planes, plane, | |
| mi + mi_col, mi_row, mi_col, path, &lfm); | |
| loop_filter_block_plane_hor(lf_data->cm, lf_data->planes, plane, | |
| mi + mi_col, mi_row, mi_col, path, &lfm); | |
| } | |
| #endif // CONFIG_EXT_PARTITION_TYPES | |
| sync_write(lf_sync, r, c, sb_cols); | |
| } | |
| } | |
| return 1; | |
| } | |
| #endif // CONFIG_PARALLEL_DEBLOCKING | |
| static void loop_filter_rows_mt(YV12_BUFFER_CONFIG *frame, AV1_COMMON *cm, | |
| struct macroblockd_plane *planes, int start, | |
| int stop, int y_only, AVxWorker *workers, | |
| int nworkers, AV1LfSync *lf_sync) { | |
| #if CONFIG_EXT_PARTITION | |
| printf( | |
| "STOPPING: This code has not been modified to work with the " | |
| "extended coding unit size experiment"); | |
| exit(EXIT_FAILURE); | |
| #endif // CONFIG_EXT_PARTITION | |
| const AVxWorkerInterface *const winterface = aom_get_worker_interface(); | |
| // Number of superblock rows and cols | |
| const int sb_rows = mi_rows_aligned_to_sb(cm) >> cm->mib_size_log2; | |
| // Decoder may allocate more threads than number of tiles based on user's | |
| // input. | |
| const int tile_cols = cm->tile_cols; | |
| const int num_workers = AOMMIN(nworkers, tile_cols); | |
| int i; | |
| if (!lf_sync->sync_range || sb_rows != lf_sync->rows || | |
| num_workers > lf_sync->num_workers) { | |
| av1_loop_filter_dealloc(lf_sync); | |
| av1_loop_filter_alloc(lf_sync, cm, sb_rows, cm->width, num_workers); | |
| } | |
| // Set up loopfilter thread data. | |
| // The decoder is capping num_workers because it has been observed that using | |
| // more threads on the loopfilter than there are cores will hurt performance | |
| // on Android. This is because the system will only schedule the tile decode | |
| // workers on cores equal to the number of tile columns. Then if the decoder | |
| // tries to use more threads for the loopfilter, it will hurt performance | |
| // because of contention. If the multithreading code changes in the future | |
| // then the number of workers used by the loopfilter should be revisited. | |
| #if CONFIG_PARALLEL_DEBLOCKING | |
| // Initialize cur_sb_col to -1 for all SB rows. | |
| memset(lf_sync->cur_sb_col, -1, sizeof(*lf_sync->cur_sb_col) * sb_rows); | |
| // Filter all the vertical edges in the whole frame | |
| for (i = 0; i < num_workers; ++i) { | |
| AVxWorker *const worker = &workers[i]; | |
| LFWorkerData *const lf_data = &lf_sync->lfdata[i]; | |
| worker->hook = (AVxWorkerHook)loop_filter_ver_row_worker; | |
| worker->data1 = lf_sync; | |
| worker->data2 = lf_data; | |
| // Loopfilter data | |
| av1_loop_filter_data_reset(lf_data, frame, cm, planes); | |
| lf_data->start = start + i * cm->mib_size; | |
| lf_data->stop = stop; | |
| lf_data->y_only = y_only; | |
| // Start loopfiltering | |
| if (i == num_workers - 1) { | |
| winterface->execute(worker); | |
| } else { | |
| winterface->launch(worker); | |
| } | |
| } | |
| // Wait till all rows are finished | |
| for (i = 0; i < num_workers; ++i) { | |
| winterface->sync(&workers[i]); | |
| } | |
| memset(lf_sync->cur_sb_col, -1, sizeof(*lf_sync->cur_sb_col) * sb_rows); | |
| // Filter all the horizontal edges in the whole frame | |
| for (i = 0; i < num_workers; ++i) { | |
| AVxWorker *const worker = &workers[i]; | |
| LFWorkerData *const lf_data = &lf_sync->lfdata[i]; | |
| worker->hook = (AVxWorkerHook)loop_filter_hor_row_worker; | |
| worker->data1 = lf_sync; | |
| worker->data2 = lf_data; | |
| // Loopfilter data | |
| av1_loop_filter_data_reset(lf_data, frame, cm, planes); | |
| lf_data->start = start + i * cm->mib_size; | |
| lf_data->stop = stop; | |
| lf_data->y_only = y_only; | |
| // Start loopfiltering | |
| if (i == num_workers - 1) { | |
| winterface->execute(worker); | |
| } else { | |
| winterface->launch(worker); | |
| } | |
| } | |
| // Wait till all rows are finished | |
| for (i = 0; i < num_workers; ++i) { | |
| winterface->sync(&workers[i]); | |
| } | |
| #else // CONFIG_PARALLEL_DEBLOCKING | |
| // Initialize cur_sb_col to -1 for all SB rows. | |
| memset(lf_sync->cur_sb_col, -1, sizeof(*lf_sync->cur_sb_col) * sb_rows); | |
| for (i = 0; i < num_workers; ++i) { | |
| AVxWorker *const worker = &workers[i]; | |
| LFWorkerData *const lf_data = &lf_sync->lfdata[i]; | |
| worker->hook = (AVxWorkerHook)loop_filter_row_worker; | |
| worker->data1 = lf_sync; | |
| worker->data2 = lf_data; | |
| // Loopfilter data | |
| av1_loop_filter_data_reset(lf_data, frame, cm, planes); | |
| lf_data->start = start + i * cm->mib_size; | |
| lf_data->stop = stop; | |
| lf_data->y_only = y_only; | |
| // Start loopfiltering | |
| if (i == num_workers - 1) { | |
| winterface->execute(worker); | |
| } else { | |
| winterface->launch(worker); | |
| } | |
| } | |
| // Wait till all rows are finished | |
| for (i = 0; i < num_workers; ++i) { | |
| winterface->sync(&workers[i]); | |
| } | |
| #endif // CONFIG_PARALLEL_DEBLOCKING | |
| } | |
| void av1_loop_filter_frame_mt(YV12_BUFFER_CONFIG *frame, AV1_COMMON *cm, | |
| struct macroblockd_plane *planes, | |
| int frame_filter_level, | |
| #if CONFIG_LOOPFILTER_LEVEL | |
| int frame_filter_level_r, | |
| #endif | |
| int y_only, int partial_frame, AVxWorker *workers, | |
| int num_workers, AV1LfSync *lf_sync) { | |
| int start_mi_row, end_mi_row, mi_rows_to_filter; | |
| if (!frame_filter_level) return; | |
| start_mi_row = 0; | |
| mi_rows_to_filter = cm->mi_rows; | |
| if (partial_frame && cm->mi_rows > 8) { | |
| start_mi_row = cm->mi_rows >> 1; | |
| start_mi_row &= 0xfffffff8; | |
| mi_rows_to_filter = AOMMAX(cm->mi_rows / 8, 8); | |
| } | |
| end_mi_row = start_mi_row + mi_rows_to_filter; | |
| #if CONFIG_LOOPFILTER_LEVEL | |
| av1_loop_filter_frame_init(cm, frame_filter_level, frame_filter_level_r, | |
| y_only); | |
| #else | |
| av1_loop_filter_frame_init(cm, frame_filter_level, frame_filter_level); | |
| #endif // CONFIG_LOOPFILTER_LEVEL | |
| loop_filter_rows_mt(frame, cm, planes, start_mi_row, end_mi_row, y_only, | |
| workers, num_workers, lf_sync); | |
| } | |
| // Set up nsync by width. | |
| static INLINE int get_sync_range(int width) { | |
| // nsync numbers are picked by testing. For example, for 4k | |
| // video, using 4 gives best performance. | |
| if (width < 640) | |
| return 1; | |
| else if (width <= 1280) | |
| return 2; | |
| else if (width <= 4096) | |
| return 4; | |
| else | |
| return 8; | |
| } | |
| // Allocate memory for lf row synchronization | |
| void av1_loop_filter_alloc(AV1LfSync *lf_sync, AV1_COMMON *cm, int rows, | |
| int width, int num_workers) { | |
| lf_sync->rows = rows; | |
| #if CONFIG_MULTITHREAD | |
| { | |
| int i; | |
| CHECK_MEM_ERROR(cm, lf_sync->mutex_, | |
| aom_malloc(sizeof(*lf_sync->mutex_) * rows)); | |
| if (lf_sync->mutex_) { | |
| for (i = 0; i < rows; ++i) { | |
| pthread_mutex_init(&lf_sync->mutex_[i], NULL); | |
| } | |
| } | |
| CHECK_MEM_ERROR(cm, lf_sync->cond_, | |
| aom_malloc(sizeof(*lf_sync->cond_) * rows)); | |
| if (lf_sync->cond_) { | |
| for (i = 0; i < rows; ++i) { | |
| pthread_cond_init(&lf_sync->cond_[i], NULL); | |
| } | |
| } | |
| } | |
| #endif // CONFIG_MULTITHREAD | |
| CHECK_MEM_ERROR(cm, lf_sync->lfdata, | |
| aom_malloc(num_workers * sizeof(*lf_sync->lfdata))); | |
| lf_sync->num_workers = num_workers; | |
| CHECK_MEM_ERROR(cm, lf_sync->cur_sb_col, | |
| aom_malloc(sizeof(*lf_sync->cur_sb_col) * rows)); | |
| // Set up nsync. | |
| lf_sync->sync_range = get_sync_range(width); | |
| } | |
| // Deallocate lf synchronization related mutex and data | |
| void av1_loop_filter_dealloc(AV1LfSync *lf_sync) { | |
| if (lf_sync != NULL) { | |
| #if CONFIG_MULTITHREAD | |
| int i; | |
| if (lf_sync->mutex_ != NULL) { | |
| for (i = 0; i < lf_sync->rows; ++i) { | |
| pthread_mutex_destroy(&lf_sync->mutex_[i]); | |
| } | |
| aom_free(lf_sync->mutex_); | |
| } | |
| if (lf_sync->cond_ != NULL) { | |
| for (i = 0; i < lf_sync->rows; ++i) { | |
| pthread_cond_destroy(&lf_sync->cond_[i]); | |
| } | |
| aom_free(lf_sync->cond_); | |
| } | |
| #endif // CONFIG_MULTITHREAD | |
| aom_free(lf_sync->lfdata); | |
| aom_free(lf_sync->cur_sb_col); | |
| // clear the structure as the source of this call may be a resize in which | |
| // case this call will be followed by an _alloc() which may fail. | |
| av1_zero(*lf_sync); | |
| } | |
| } | |
| // Accumulate frame counts. FRAME_COUNTS consist solely of 'unsigned int' | |
| // members, so we treat it as an array, and sum over the whole length. | |
| void av1_accumulate_frame_counts(FRAME_COUNTS *acc_counts, | |
| FRAME_COUNTS *counts) { | |
| unsigned int *const acc = (unsigned int *)acc_counts; | |
| const unsigned int *const cnt = (unsigned int *)counts; | |
| const unsigned int n_counts = sizeof(FRAME_COUNTS) / sizeof(unsigned int); | |
| unsigned int i; | |
| for (i = 0; i < n_counts; i++) acc[i] += cnt[i]; | |
| } |