blob: 040973376da4e9001e025ae39e7a6d8dbdd4d3be [file] [log] [blame]
/*
* Copyright (c) 2016, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 2 Clause License and
* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
* was not distributed with this source code in the LICENSE file, you can
* obtain it at www.aomedia.org/license/software. If the Alliance for Open
* Media Patent License 1.0 was not distributed with this source code in the
* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
*/
#ifndef AOM_AV1_ENCODER_AV1_QUANTIZE_H_
#define AOM_AV1_ENCODER_AV1_QUANTIZE_H_
#include "config/aom_config.h"
#include "av1/common/quant_common.h"
#include "av1/common/scan.h"
#include "av1/encoder/block.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef struct QUANT_PARAM {
int log_scale;
TX_SIZE tx_size;
const qm_val_t *qmatrix;
const qm_val_t *iqmatrix;
int use_quant_b_adapt;
int use_optimize_b;
int xform_quant_idx;
} QUANT_PARAM;
typedef void (*AV1_QUANT_FACADE)(const tran_low_t *coeff_ptr, intptr_t n_coeffs,
const MACROBLOCK_PLANE *p,
tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc,
const QUANT_PARAM *qparam);
// The QUANTS structure is used only for internal quantizer setup in
// av1_quantize.c.
// All of its fields use the same coefficient shift/scaling at TX.
typedef struct {
// 0: dc 1: ac 2-8: ac repeated to SIMD width
DECLARE_ALIGNED(16, int16_t, y_quant[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, y_quant_shift[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, y_zbin[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, y_round[QINDEX_RANGE][8]);
// TODO(jingning): in progress of re-working the quantization. will decide
// if we want to deprecate the current use of y_quant.
DECLARE_ALIGNED(16, int16_t, y_quant_fp[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, u_quant_fp[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, v_quant_fp[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, y_round_fp[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, u_round_fp[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, v_round_fp[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, u_quant[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, v_quant[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, u_quant_shift[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, v_quant_shift[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, u_zbin[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, v_zbin[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, u_round[QINDEX_RANGE][8]);
DECLARE_ALIGNED(16, int16_t, v_round[QINDEX_RANGE][8]);
} QUANTS;
// The Dequants structure is used only for internal quantizer setup in
// av1_quantize.c.
// Fields are suffixed according to whether or not they're expressed in
// the same coefficient shift/precision as TX or a fixed Q3 format.
typedef struct {
DECLARE_ALIGNED(16, int16_t,
y_dequant_QTX[QINDEX_RANGE][8]); // 8: SIMD width
DECLARE_ALIGNED(16, int16_t,
u_dequant_QTX[QINDEX_RANGE][8]); // 8: SIMD width
DECLARE_ALIGNED(16, int16_t,
v_dequant_QTX[QINDEX_RANGE][8]); // 8: SIMD width
} Dequants;
// The DeltaQuantParams structure holds the dc/ac deltaq parameters.
typedef struct {
int y_dc_delta_q;
int u_dc_delta_q;
int u_ac_delta_q;
int v_dc_delta_q;
int v_ac_delta_q;
} DeltaQuantParams;
typedef struct {
// Quantization parameters for internal quantizer setup.
QUANTS quants;
// Dequantization parameters for internal quantizer setup.
Dequants dequants;
// Deltaq parameters to track the state of the dc/ac deltaq parameters in
// cm->quant_params. It is used to decide whether the quantizer tables need
// to be re-initialized.
DeltaQuantParams prev_deltaq_params;
} EncQuantDequantParams;
struct AV1_COMP;
struct AV1Common;
void av1_frame_init_quantizer(struct AV1_COMP *cpi);
void av1_init_plane_quantizers(const struct AV1_COMP *cpi, MACROBLOCK *x,
int segment_id, const int do_update);
void av1_build_quantizer(aom_bit_depth_t bit_depth, int y_dc_delta_q,
int u_dc_delta_q, int u_ac_delta_q, int v_dc_delta_q,
int v_ac_delta_q, QUANTS *const quants,
Dequants *const deq);
void av1_init_quantizer(EncQuantDequantParams *const enc_quant_dequant_params,
const CommonQuantParams *quant_params,
aom_bit_depth_t bit_depth);
void av1_set_quantizer(struct AV1Common *const cm, int min_qmlevel,
int max_qmlevel, int q, int enable_chroma_deltaq,
int enable_hdr_deltaq);
int av1_quantizer_to_qindex(int quantizer);
int av1_qindex_to_quantizer(int qindex);
void av1_quantize_skip(intptr_t n_coeffs, tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr);
/*!\brief Quantize transform coefficients without using qmatrix
*
* quant_ptr, dequant_ptr and round_ptr are size 2 arrays,
* where index 0 corresponds to dc coeff and index 1 corresponds to ac coeffs.
*
* \param[in] quant_ptr 16-bit fixed point representation of inverse
* quantize step size, i.e. 2^16/dequant
* \param[in] dequant_ptr quantize step size
* \param[in] round_ptr rounding
* \param[in] log_scale the relative log scale of the transform
* coefficients
* \param[in] scan scan[i] indicates the position of ith to-be-coded
* coefficient
* \param[in] coeff_count number of coefficients
* \param[out] qcoeff_ptr quantized coefficients
* \param[out] dqcoeff_ptr dequantized coefficients
*
* \return The last non-zero coefficient's scan index plus 1
*/
int av1_quantize_fp_no_qmatrix(const int16_t quant_ptr[2],
const int16_t dequant_ptr[2],
const int16_t round_ptr[2], int log_scale,
const int16_t *scan, int coeff_count,
const tran_low_t *coeff_ptr,
tran_low_t *qcoeff_ptr, tran_low_t *dqcoeff_ptr);
void av1_quantize_fp_facade(const tran_low_t *coeff_ptr, intptr_t n_coeffs,
const MACROBLOCK_PLANE *p, tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc, const QUANT_PARAM *qparam);
void av1_quantize_b_facade(const tran_low_t *coeff_ptr, intptr_t n_coeffs,
const MACROBLOCK_PLANE *p, tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc, const QUANT_PARAM *qparam);
void av1_quantize_dc_facade(const tran_low_t *coeff_ptr, intptr_t n_coeffs,
const MACROBLOCK_PLANE *p, tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc, const QUANT_PARAM *qparam);
/*!\brief Update quantize parameters in MACROBLOCK
*
* \param[in] enc_quant_dequant_params This parameter cached the quantize and
* dequantize parameters for all q
* indices.
* \param[in] qindex Quantize index used for the current
* superblock.
* \param[out] x A superblock data structure for
* encoder.
*/
void av1_set_q_index(const EncQuantDequantParams *enc_quant_dequant_params,
int qindex, MACROBLOCK *x);
/*!\brief Update quantize matrix in MACROBLOCKD based on segment id
*
* \param[in] quant_params Quantize parameters used by encoder and decoder
* \param[in] segment_id Segment id.
* \param[out] xd A superblock data structure used by encoder and
* decoder.
*/
void av1_set_qmatrix(const CommonQuantParams *quant_params, int segment_id,
MACROBLOCKD *xd);
#if CONFIG_AV1_HIGHBITDEPTH
void av1_highbd_quantize_fp_facade(const tran_low_t *coeff_ptr,
intptr_t n_coeffs, const MACROBLOCK_PLANE *p,
tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc,
const QUANT_PARAM *qparam);
void av1_highbd_quantize_b_facade(const tran_low_t *coeff_ptr,
intptr_t n_coeffs, const MACROBLOCK_PLANE *p,
tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc,
const QUANT_PARAM *qparam);
void av1_highbd_quantize_dc_facade(const tran_low_t *coeff_ptr,
intptr_t n_coeffs, const MACROBLOCK_PLANE *p,
tran_low_t *qcoeff_ptr,
tran_low_t *dqcoeff_ptr, uint16_t *eob_ptr,
const SCAN_ORDER *sc,
const QUANT_PARAM *qparam);
#endif
#ifdef __cplusplus
} // extern "C"
#endif
#endif // AOM_AV1_ENCODER_AV1_QUANTIZE_H_