|  | /* | 
|  | * Copyright (c) 2016, Alliance for Open Media. All rights reserved | 
|  | * | 
|  | * This source code is subject to the terms of the BSD 2 Clause License and | 
|  | * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
|  | * was not distributed with this source code in the LICENSE file, you can | 
|  | * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
|  | * Media Patent License 1.0 was not distributed with this source code in the | 
|  | * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
|  | */ | 
|  |  | 
|  | #include <limits.h> | 
|  | #include <math.h> | 
|  | #include <stdio.h> | 
|  |  | 
|  | #include "config/aom_config.h" | 
|  | #include "config/aom_dsp_rtcd.h" | 
|  |  | 
|  | #include "aom_dsp/aom_dsp_common.h" | 
|  | #include "aom_mem/aom_mem.h" | 
|  | #include "aom_ports/mem.h" | 
|  |  | 
|  | #include "av1/common/av1_common_int.h" | 
|  | #include "av1/common/common.h" | 
|  | #include "av1/common/filter.h" | 
|  | #include "av1/common/mvref_common.h" | 
|  | #include "av1/common/reconinter.h" | 
|  |  | 
|  | #include "av1/encoder/encoder.h" | 
|  | #include "av1/encoder/encodemv.h" | 
|  | #include "av1/encoder/mcomp.h" | 
|  | #include "av1/encoder/rdopt.h" | 
|  | #include "av1/encoder/reconinter_enc.h" | 
|  |  | 
|  | static INLINE void init_mv_cost_params(MV_COST_PARAMS *mv_cost_params, | 
|  | const MvCosts *mv_costs, | 
|  | const MV *ref_mv, int errorperbit, | 
|  | int sadperbit) { | 
|  | mv_cost_params->ref_mv = ref_mv; | 
|  | mv_cost_params->full_ref_mv = get_fullmv_from_mv(ref_mv); | 
|  | mv_cost_params->mv_cost_type = MV_COST_ENTROPY; | 
|  | mv_cost_params->error_per_bit = errorperbit; | 
|  | mv_cost_params->sad_per_bit = sadperbit; | 
|  | // For allintra encoding mode, 'mv_costs' is not allocated. Hence, the | 
|  | // population of mvjcost and mvcost are avoided. In case of IntraBC, these | 
|  | // values are populated from 'dv_costs' in av1_set_ms_to_intra_mode(). | 
|  | if (mv_costs != NULL) { | 
|  | mv_cost_params->mvjcost = mv_costs->nmv_joint_cost; | 
|  | mv_cost_params->mvcost[0] = mv_costs->mv_cost_stack[0]; | 
|  | mv_cost_params->mvcost[1] = mv_costs->mv_cost_stack[1]; | 
|  | } | 
|  | } | 
|  |  | 
|  | static INLINE void init_ms_buffers(MSBuffers *ms_buffers, const MACROBLOCK *x) { | 
|  | ms_buffers->ref = &x->e_mbd.plane[0].pre[0]; | 
|  | ms_buffers->src = &x->plane[0].src; | 
|  |  | 
|  | av1_set_ms_compound_refs(ms_buffers, NULL, NULL, 0, 0); | 
|  |  | 
|  | ms_buffers->wsrc = x->obmc_buffer.wsrc; | 
|  | ms_buffers->obmc_mask = x->obmc_buffer.mask; | 
|  | } | 
|  |  | 
|  | static AOM_INLINE SEARCH_METHODS | 
|  | get_faster_search_method(SEARCH_METHODS search_method) { | 
|  | // Note on search method's accuracy: | 
|  | //  1. NSTEP | 
|  | //  2. DIAMOND | 
|  | //  3. BIGDIA \approx SQUARE | 
|  | //  4. HEX. | 
|  | //  5. FAST_HEX \approx FAST_DIAMOND | 
|  | switch (search_method) { | 
|  | case NSTEP: return DIAMOND; | 
|  | case NSTEP_8PT: return DIAMOND; | 
|  | case DIAMOND: return BIGDIA; | 
|  | case CLAMPED_DIAMOND: return BIGDIA; | 
|  | case BIGDIA: return HEX; | 
|  | case SQUARE: return HEX; | 
|  | case HEX: return FAST_HEX; | 
|  | case FAST_HEX: return FAST_HEX; | 
|  | case FAST_DIAMOND: return FAST_DIAMOND; | 
|  | case FAST_BIGDIA: return FAST_BIGDIA; | 
|  | default: assert(0 && "Invalid search method!"); return DIAMOND; | 
|  | } | 
|  | } | 
|  |  | 
|  | void av1_init_obmc_buffer(OBMCBuffer *obmc_buffer) { | 
|  | obmc_buffer->wsrc = NULL; | 
|  | obmc_buffer->mask = NULL; | 
|  | obmc_buffer->above_pred = NULL; | 
|  | obmc_buffer->left_pred = NULL; | 
|  | } | 
|  |  | 
|  | void av1_make_default_fullpel_ms_params( | 
|  | FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const struct AV1_COMP *cpi, | 
|  | const MACROBLOCK *x, BLOCK_SIZE bsize, const MV *ref_mv, | 
|  | const search_site_config search_sites[NUM_DISTINCT_SEARCH_METHODS], | 
|  | int fine_search_interval) { | 
|  | const MV_SPEED_FEATURES *mv_sf = &cpi->sf.mv_sf; | 
|  |  | 
|  | // High level params | 
|  | ms_params->bsize = bsize; | 
|  | ms_params->vfp = &cpi->ppi->fn_ptr[bsize]; | 
|  |  | 
|  | init_ms_buffers(&ms_params->ms_buffers, x); | 
|  |  | 
|  | SEARCH_METHODS search_method = mv_sf->search_method; | 
|  | if (mv_sf->use_bsize_dependent_search_method) { | 
|  | const int min_dim = AOMMIN(block_size_wide[bsize], block_size_high[bsize]); | 
|  | if (min_dim >= 32) { | 
|  | search_method = get_faster_search_method(search_method); | 
|  | } | 
|  | } | 
|  |  | 
|  | av1_set_mv_search_method(ms_params, search_sites, search_method); | 
|  |  | 
|  | const int use_downsampled_sad = | 
|  | mv_sf->use_downsampled_sad && block_size_high[bsize] >= 16; | 
|  | if (use_downsampled_sad) { | 
|  | ms_params->sdf = ms_params->vfp->sdsf; | 
|  | ms_params->sdx4df = ms_params->vfp->sdsx4df; | 
|  | } else { | 
|  | ms_params->sdf = ms_params->vfp->sdf; | 
|  | ms_params->sdx4df = ms_params->vfp->sdx4df; | 
|  | } | 
|  |  | 
|  | ms_params->mesh_patterns[0] = mv_sf->mesh_patterns; | 
|  | ms_params->mesh_patterns[1] = mv_sf->intrabc_mesh_patterns; | 
|  | ms_params->force_mesh_thresh = mv_sf->exhaustive_searches_thresh; | 
|  | ms_params->prune_mesh_search = | 
|  | (cpi->sf.mv_sf.prune_mesh_search == PRUNE_MESH_SEARCH_LVL_2) ? 1 : 0; | 
|  | ms_params->mesh_search_mv_diff_threshold = 4; | 
|  | ms_params->run_mesh_search = 0; | 
|  | ms_params->fine_search_interval = fine_search_interval; | 
|  |  | 
|  | ms_params->is_intra_mode = 0; | 
|  |  | 
|  | ms_params->fast_obmc_search = mv_sf->obmc_full_pixel_search_level; | 
|  |  | 
|  | ms_params->mv_limits = x->mv_limits; | 
|  | av1_set_mv_search_range(&ms_params->mv_limits, ref_mv); | 
|  |  | 
|  | // Mvcost params | 
|  | init_mv_cost_params(&ms_params->mv_cost_params, x->mv_costs, ref_mv, | 
|  | x->errorperbit, x->sadperbit); | 
|  | } | 
|  |  | 
|  | void av1_set_ms_to_intra_mode(FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const IntraBCMVCosts *dv_costs) { | 
|  | ms_params->is_intra_mode = 1; | 
|  |  | 
|  | MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  |  | 
|  | mv_cost_params->mvjcost = dv_costs->joint_mv; | 
|  | mv_cost_params->mvcost[0] = dv_costs->dv_costs[0]; | 
|  | mv_cost_params->mvcost[1] = dv_costs->dv_costs[1]; | 
|  | } | 
|  |  | 
|  | void av1_make_default_subpel_ms_params(SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const struct AV1_COMP *cpi, | 
|  | const MACROBLOCK *x, BLOCK_SIZE bsize, | 
|  | const MV *ref_mv, const int *cost_list) { | 
|  | const AV1_COMMON *cm = &cpi->common; | 
|  | // High level params | 
|  | ms_params->allow_hp = cm->features.allow_high_precision_mv; | 
|  | ms_params->forced_stop = cpi->sf.mv_sf.subpel_force_stop; | 
|  | ms_params->iters_per_step = cpi->sf.mv_sf.subpel_iters_per_step; | 
|  | ms_params->cost_list = cond_cost_list_const(cpi, cost_list); | 
|  |  | 
|  | av1_set_subpel_mv_search_range(&ms_params->mv_limits, &x->mv_limits, ref_mv); | 
|  |  | 
|  | // Mvcost params | 
|  | init_mv_cost_params(&ms_params->mv_cost_params, x->mv_costs, ref_mv, | 
|  | x->errorperbit, x->sadperbit); | 
|  |  | 
|  | // Subpel variance params | 
|  | ms_params->var_params.vfp = &cpi->ppi->fn_ptr[bsize]; | 
|  | ms_params->var_params.subpel_search_type = | 
|  | cpi->sf.mv_sf.use_accurate_subpel_search; | 
|  | ms_params->var_params.w = block_size_wide[bsize]; | 
|  | ms_params->var_params.h = block_size_high[bsize]; | 
|  |  | 
|  | // Ref and src buffers | 
|  | MSBuffers *ms_buffers = &ms_params->var_params.ms_buffers; | 
|  | init_ms_buffers(ms_buffers, x); | 
|  | } | 
|  |  | 
|  | static INLINE int get_offset_from_fullmv(const FULLPEL_MV *mv, int stride) { | 
|  | return mv->row * stride + mv->col; | 
|  | } | 
|  |  | 
|  | static INLINE const uint8_t *get_buf_from_fullmv(const struct buf_2d *buf, | 
|  | const FULLPEL_MV *mv) { | 
|  | return &buf->buf[get_offset_from_fullmv(mv, buf->stride)]; | 
|  | } | 
|  |  | 
|  | void av1_set_mv_search_range(FullMvLimits *mv_limits, const MV *mv) { | 
|  | int col_min = | 
|  | GET_MV_RAWPEL(mv->col) - MAX_FULL_PEL_VAL + (mv->col & 7 ? 1 : 0); | 
|  | int row_min = | 
|  | GET_MV_RAWPEL(mv->row) - MAX_FULL_PEL_VAL + (mv->row & 7 ? 1 : 0); | 
|  | int col_max = GET_MV_RAWPEL(mv->col) + MAX_FULL_PEL_VAL; | 
|  | int row_max = GET_MV_RAWPEL(mv->row) + MAX_FULL_PEL_VAL; | 
|  |  | 
|  | col_min = AOMMAX(col_min, GET_MV_RAWPEL(MV_LOW) + 1); | 
|  | row_min = AOMMAX(row_min, GET_MV_RAWPEL(MV_LOW) + 1); | 
|  | col_max = AOMMIN(col_max, GET_MV_RAWPEL(MV_UPP) - 1); | 
|  | row_max = AOMMIN(row_max, GET_MV_RAWPEL(MV_UPP) - 1); | 
|  |  | 
|  | // Get intersection of UMV window and valid MV window to reduce # of checks | 
|  | // in diamond search. | 
|  | if (mv_limits->col_min < col_min) mv_limits->col_min = col_min; | 
|  | if (mv_limits->col_max > col_max) mv_limits->col_max = col_max; | 
|  | if (mv_limits->row_min < row_min) mv_limits->row_min = row_min; | 
|  | if (mv_limits->row_max > row_max) mv_limits->row_max = row_max; | 
|  | } | 
|  |  | 
|  | int av1_init_search_range(int size) { | 
|  | int sr = 0; | 
|  | // Minimum search size no matter what the passed in value. | 
|  | size = AOMMAX(16, size); | 
|  |  | 
|  | while ((size << sr) < MAX_FULL_PEL_VAL) sr++; | 
|  |  | 
|  | sr = AOMMIN(sr, MAX_MVSEARCH_STEPS - 2); | 
|  | return sr; | 
|  | } | 
|  |  | 
|  | // ============================================================================ | 
|  | //  Cost of motion vectors | 
|  | // ============================================================================ | 
|  | // TODO(any): Adaptively adjust the regularization strength based on image size | 
|  | // and motion activity instead of using hard-coded values. It seems like we | 
|  | // roughly half the lambda for each increase in resolution | 
|  | // These are multiplier used to perform regularization in motion compensation | 
|  | // when x->mv_cost_type is set to MV_COST_L1. | 
|  | // LOWRES | 
|  | #define SSE_LAMBDA_LOWRES 2   // Used by mv_cost_err_fn | 
|  | #define SAD_LAMBDA_LOWRES 32  // Used by mvsad_err_cost during full pixel search | 
|  | // MIDRES | 
|  | #define SSE_LAMBDA_MIDRES 0   // Used by mv_cost_err_fn | 
|  | #define SAD_LAMBDA_MIDRES 15  // Used by mvsad_err_cost during full pixel search | 
|  | // HDRES | 
|  | #define SSE_LAMBDA_HDRES 1  // Used by mv_cost_err_fn | 
|  | #define SAD_LAMBDA_HDRES 8  // Used by mvsad_err_cost during full pixel search | 
|  |  | 
|  | // Returns the rate of encoding the current motion vector based on the | 
|  | // joint_cost and comp_cost. joint_costs covers the cost of transmitting | 
|  | // JOINT_MV, and comp_cost covers the cost of transmitting the actual motion | 
|  | // vector. | 
|  | static INLINE int mv_cost(const MV *mv, const int *joint_cost, | 
|  | const int *const comp_cost[2]) { | 
|  | return joint_cost[av1_get_mv_joint(mv)] + comp_cost[0][mv->row] + | 
|  | comp_cost[1][mv->col]; | 
|  | } | 
|  |  | 
|  | #define CONVERT_TO_CONST_MVCOST(ptr) ((const int *const *)(ptr)) | 
|  | // Returns the cost of encoding the motion vector diff := *mv - *ref. The cost | 
|  | // is defined as the rate required to encode diff * weight, rounded to the | 
|  | // nearest 2 ** 7. | 
|  | // This is NOT used during motion compensation. | 
|  | int av1_mv_bit_cost(const MV *mv, const MV *ref_mv, const int *mvjcost, | 
|  | int *const mvcost[2], int weight) { | 
|  | const MV diff = { mv->row - ref_mv->row, mv->col - ref_mv->col }; | 
|  | return ROUND_POWER_OF_TWO( | 
|  | mv_cost(&diff, mvjcost, CONVERT_TO_CONST_MVCOST(mvcost)) * weight, 7); | 
|  | } | 
|  |  | 
|  | // Returns the cost of using the current mv during the motion search. This is | 
|  | // used when var is used as the error metric. | 
|  | #define PIXEL_TRANSFORM_ERROR_SCALE 4 | 
|  | static INLINE int mv_err_cost(const MV *mv, const MV *ref_mv, | 
|  | const int *mvjcost, const int *const mvcost[2], | 
|  | int error_per_bit, MV_COST_TYPE mv_cost_type) { | 
|  | const MV diff = { mv->row - ref_mv->row, mv->col - ref_mv->col }; | 
|  | const MV abs_diff = { abs(diff.row), abs(diff.col) }; | 
|  |  | 
|  | switch (mv_cost_type) { | 
|  | case MV_COST_ENTROPY: | 
|  | if (mvcost) { | 
|  | return (int)ROUND_POWER_OF_TWO_64( | 
|  | (int64_t)mv_cost(&diff, mvjcost, mvcost) * error_per_bit, | 
|  | RDDIV_BITS + AV1_PROB_COST_SHIFT - RD_EPB_SHIFT + | 
|  | PIXEL_TRANSFORM_ERROR_SCALE); | 
|  | } | 
|  | return 0; | 
|  | case MV_COST_L1_LOWRES: | 
|  | return (SSE_LAMBDA_LOWRES * (abs_diff.row + abs_diff.col)) >> 3; | 
|  | case MV_COST_L1_MIDRES: | 
|  | return (SSE_LAMBDA_MIDRES * (abs_diff.row + abs_diff.col)) >> 3; | 
|  | case MV_COST_L1_HDRES: | 
|  | return (SSE_LAMBDA_HDRES * (abs_diff.row + abs_diff.col)) >> 3; | 
|  | case MV_COST_NONE: return 0; | 
|  | default: assert(0 && "Invalid rd_cost_type"); return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static INLINE int mv_err_cost_(const MV *mv, | 
|  | const MV_COST_PARAMS *mv_cost_params) { | 
|  | if (mv_cost_params->mv_cost_type == MV_COST_NONE) { | 
|  | return 0; | 
|  | } | 
|  | return mv_err_cost(mv, mv_cost_params->ref_mv, mv_cost_params->mvjcost, | 
|  | mv_cost_params->mvcost, mv_cost_params->error_per_bit, | 
|  | mv_cost_params->mv_cost_type); | 
|  | } | 
|  |  | 
|  | // Returns the cost of using the current mv during the motion search. This is | 
|  | // only used during full pixel motion search when sad is used as the error | 
|  | // metric | 
|  | static INLINE int mvsad_err_cost(const FULLPEL_MV *mv, const FULLPEL_MV *ref_mv, | 
|  | const int *mvjcost, const int *const mvcost[2], | 
|  | int sad_per_bit, MV_COST_TYPE mv_cost_type) { | 
|  | const MV diff = { GET_MV_SUBPEL(mv->row - ref_mv->row), | 
|  | GET_MV_SUBPEL(mv->col - ref_mv->col) }; | 
|  |  | 
|  | switch (mv_cost_type) { | 
|  | case MV_COST_ENTROPY: | 
|  | return ROUND_POWER_OF_TWO( | 
|  | (unsigned)mv_cost(&diff, mvjcost, CONVERT_TO_CONST_MVCOST(mvcost)) * | 
|  | sad_per_bit, | 
|  | AV1_PROB_COST_SHIFT); | 
|  | case MV_COST_L1_LOWRES: | 
|  | return (SAD_LAMBDA_LOWRES * (abs(diff.row) + abs(diff.col))) >> 3; | 
|  | case MV_COST_L1_MIDRES: | 
|  | return (SAD_LAMBDA_MIDRES * (abs(diff.row) + abs(diff.col))) >> 3; | 
|  | case MV_COST_L1_HDRES: | 
|  | return (SAD_LAMBDA_HDRES * (abs(diff.row) + abs(diff.col))) >> 3; | 
|  | case MV_COST_NONE: return 0; | 
|  | default: assert(0 && "Invalid rd_cost_type"); return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static INLINE int mvsad_err_cost_(const FULLPEL_MV *mv, | 
|  | const MV_COST_PARAMS *mv_cost_params) { | 
|  | return mvsad_err_cost(mv, &mv_cost_params->full_ref_mv, | 
|  | mv_cost_params->mvjcost, mv_cost_params->mvcost, | 
|  | mv_cost_params->sad_per_bit, | 
|  | mv_cost_params->mv_cost_type); | 
|  | } | 
|  |  | 
|  | // ============================================================================= | 
|  | //  Fullpixel Motion Search: Translational | 
|  | // ============================================================================= | 
|  | #define MAX_PATTERN_SCALES 11 | 
|  | #define MAX_PATTERN_CANDIDATES 8  // max number of candidates per scale | 
|  | #define PATTERN_CANDIDATES_REF 3  // number of refinement candidates | 
|  |  | 
|  | // Search site initialization for DIAMOND / CLAMPED_DIAMOND search methods. | 
|  | // level = 0: DIAMOND, level = 1: CLAMPED_DIAMOND. | 
|  | void av1_init_dsmotion_compensation(search_site_config *cfg, int stride, | 
|  | int level) { | 
|  | int num_search_steps = 0; | 
|  | int stage_index = MAX_MVSEARCH_STEPS - 1; | 
|  |  | 
|  | cfg->site[stage_index][0].mv.col = cfg->site[stage_index][0].mv.row = 0; | 
|  | cfg->site[stage_index][0].offset = 0; | 
|  | cfg->stride = stride; | 
|  |  | 
|  | // Choose the initial step size depending on level. | 
|  | const int first_step = (level > 0) ? (MAX_FIRST_STEP / 4) : MAX_FIRST_STEP; | 
|  |  | 
|  | for (int radius = first_step; radius > 0;) { | 
|  | int num_search_pts = 8; | 
|  |  | 
|  | const FULLPEL_MV search_site_mvs[13] = { | 
|  | { 0, 0 },           { -radius, 0 },      { radius, 0 }, | 
|  | { 0, -radius },     { 0, radius },       { -radius, -radius }, | 
|  | { radius, radius }, { -radius, radius }, { radius, -radius }, | 
|  | }; | 
|  |  | 
|  | int i; | 
|  | for (i = 0; i <= num_search_pts; ++i) { | 
|  | search_site *const site = &cfg->site[stage_index][i]; | 
|  | site->mv = search_site_mvs[i]; | 
|  | site->offset = get_offset_from_fullmv(&site->mv, stride); | 
|  | } | 
|  | cfg->searches_per_step[stage_index] = num_search_pts; | 
|  | cfg->radius[stage_index] = radius; | 
|  | // Update the search radius based on level. | 
|  | if (!level || ((stage_index < 9) && level)) radius /= 2; | 
|  | --stage_index; | 
|  | ++num_search_steps; | 
|  | } | 
|  | cfg->num_search_steps = num_search_steps; | 
|  | } | 
|  |  | 
|  | void av1_init_motion_fpf(search_site_config *cfg, int stride) { | 
|  | int num_search_steps = 0; | 
|  | int stage_index = MAX_MVSEARCH_STEPS - 1; | 
|  |  | 
|  | cfg->site[stage_index][0].mv.col = cfg->site[stage_index][0].mv.row = 0; | 
|  | cfg->site[stage_index][0].offset = 0; | 
|  | cfg->stride = stride; | 
|  |  | 
|  | for (int radius = MAX_FIRST_STEP; radius > 0; radius /= 2) { | 
|  | // Generate offsets for 8 search sites per step. | 
|  | int tan_radius = AOMMAX((int)(0.41 * radius), 1); | 
|  | int num_search_pts = 12; | 
|  | if (radius == 1) num_search_pts = 8; | 
|  |  | 
|  | const FULLPEL_MV search_site_mvs[13] = { | 
|  | { 0, 0 }, | 
|  | { -radius, 0 }, | 
|  | { radius, 0 }, | 
|  | { 0, -radius }, | 
|  | { 0, radius }, | 
|  | { -radius, -tan_radius }, | 
|  | { radius, tan_radius }, | 
|  | { -tan_radius, radius }, | 
|  | { tan_radius, -radius }, | 
|  | { -radius, tan_radius }, | 
|  | { radius, -tan_radius }, | 
|  | { tan_radius, radius }, | 
|  | { -tan_radius, -radius }, | 
|  | }; | 
|  |  | 
|  | int i; | 
|  | for (i = 0; i <= num_search_pts; ++i) { | 
|  | search_site *const site = &cfg->site[stage_index][i]; | 
|  | site->mv = search_site_mvs[i]; | 
|  | site->offset = get_offset_from_fullmv(&site->mv, stride); | 
|  | } | 
|  | cfg->searches_per_step[stage_index] = num_search_pts; | 
|  | cfg->radius[stage_index] = radius; | 
|  | --stage_index; | 
|  | ++num_search_steps; | 
|  | } | 
|  | cfg->num_search_steps = num_search_steps; | 
|  | } | 
|  |  | 
|  | // Search site initialization for NSTEP / NSTEP_8PT search methods. | 
|  | // level = 0: NSTEP, level = 1: NSTEP_8PT. | 
|  | void av1_init_motion_compensation_nstep(search_site_config *cfg, int stride, | 
|  | int level) { | 
|  | int num_search_steps = 0; | 
|  | int stage_index = 0; | 
|  | cfg->stride = stride; | 
|  | int radius = 1; | 
|  | const int num_stages = (level > 0) ? 16 : 15; | 
|  | for (stage_index = 0; stage_index < num_stages; ++stage_index) { | 
|  | int tan_radius = AOMMAX((int)(0.41 * radius), 1); | 
|  | int num_search_pts = 12; | 
|  | if ((radius <= 5) || (level > 0)) { | 
|  | tan_radius = radius; | 
|  | num_search_pts = 8; | 
|  | } | 
|  | const FULLPEL_MV search_site_mvs[13] = { | 
|  | { 0, 0 }, | 
|  | { -radius, 0 }, | 
|  | { radius, 0 }, | 
|  | { 0, -radius }, | 
|  | { 0, radius }, | 
|  | { -radius, -tan_radius }, | 
|  | { radius, tan_radius }, | 
|  | { -tan_radius, radius }, | 
|  | { tan_radius, -radius }, | 
|  | { -radius, tan_radius }, | 
|  | { radius, -tan_radius }, | 
|  | { tan_radius, radius }, | 
|  | { -tan_radius, -radius }, | 
|  | }; | 
|  |  | 
|  | for (int i = 0; i <= num_search_pts; ++i) { | 
|  | search_site *const site = &cfg->site[stage_index][i]; | 
|  | site->mv = search_site_mvs[i]; | 
|  | site->offset = get_offset_from_fullmv(&site->mv, stride); | 
|  | } | 
|  | cfg->searches_per_step[stage_index] = num_search_pts; | 
|  | cfg->radius[stage_index] = radius; | 
|  | ++num_search_steps; | 
|  | if (stage_index < 12) | 
|  | radius = (int)AOMMAX((radius * 1.5 + 0.5), radius + 1); | 
|  | } | 
|  | cfg->num_search_steps = num_search_steps; | 
|  | } | 
|  |  | 
|  | // Search site initialization for BIGDIA / FAST_BIGDIA / FAST_DIAMOND | 
|  | // search methods. | 
|  | void av1_init_motion_compensation_bigdia(search_site_config *cfg, int stride, | 
|  | int level) { | 
|  | (void)level; | 
|  | cfg->stride = stride; | 
|  | // First scale has 4-closest points, the rest have 8 points in diamond | 
|  | // shape at increasing scales | 
|  | static const int bigdia_num_candidates[MAX_PATTERN_SCALES] = { | 
|  | 4, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, | 
|  | }; | 
|  |  | 
|  | // BIGDIA search method candidates. | 
|  | // Note that the largest candidate step at each scale is 2^scale | 
|  | /* clang-format off */ | 
|  | static const FULLPEL_MV | 
|  | site_candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES] = { | 
|  | { { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 }, { 0, 0 }, { 0, 0 }, | 
|  | { 0, 0 }, { 0, 0 } }, | 
|  | { { -1, -1 }, { 0, -2 }, { 1, -1 }, { 2, 0 }, { 1, 1 }, { 0, 2 }, | 
|  | { -1, 1 }, { -2, 0 } }, | 
|  | { { -2, -2 }, { 0, -4 }, { 2, -2 }, { 4, 0 }, { 2, 2 }, { 0, 4 }, | 
|  | { -2, 2 }, { -4, 0 } }, | 
|  | { { -4, -4 }, { 0, -8 }, { 4, -4 }, { 8, 0 }, { 4, 4 }, { 0, 8 }, | 
|  | { -4, 4 }, { -8, 0 } }, | 
|  | { { -8, -8 }, { 0, -16 }, { 8, -8 }, { 16, 0 }, { 8, 8 }, { 0, 16 }, | 
|  | { -8, 8 }, { -16, 0 } }, | 
|  | { { -16, -16 }, { 0, -32 }, { 16, -16 }, { 32, 0 }, { 16, 16 }, | 
|  | { 0, 32 }, { -16, 16 }, { -32, 0 } }, | 
|  | { { -32, -32 }, { 0, -64 }, { 32, -32 }, { 64, 0 }, { 32, 32 }, | 
|  | { 0, 64 }, { -32, 32 }, { -64, 0 } }, | 
|  | { { -64, -64 }, { 0, -128 }, { 64, -64 }, { 128, 0 }, { 64, 64 }, | 
|  | { 0, 128 }, { -64, 64 }, { -128, 0 } }, | 
|  | { { -128, -128 }, { 0, -256 }, { 128, -128 }, { 256, 0 }, | 
|  | { 128, 128 }, { 0, 256 }, { -128, 128 }, { -256, 0 } }, | 
|  | { { -256, -256 }, { 0, -512 }, { 256, -256 }, { 512, 0 }, | 
|  | { 256, 256 }, { 0, 512 }, { -256, 256 }, { -512, 0 } }, | 
|  | { { -512, -512 }, { 0, -1024 }, { 512, -512 }, { 1024, 0 }, | 
|  | { 512, 512 }, { 0, 1024 }, { -512, 512 }, { -1024, 0 } }, | 
|  | }; | 
|  |  | 
|  | /* clang-format on */ | 
|  | int radius = 1; | 
|  | for (int i = 0; i < MAX_PATTERN_SCALES; ++i) { | 
|  | cfg->searches_per_step[i] = bigdia_num_candidates[i]; | 
|  | cfg->radius[i] = radius; | 
|  | for (int j = 0; j < MAX_PATTERN_CANDIDATES; ++j) { | 
|  | search_site *const site = &cfg->site[i][j]; | 
|  | site->mv = site_candidates[i][j]; | 
|  | site->offset = get_offset_from_fullmv(&site->mv, stride); | 
|  | } | 
|  | radius *= 2; | 
|  | } | 
|  | cfg->num_search_steps = MAX_PATTERN_SCALES; | 
|  | } | 
|  |  | 
|  | // Search site initialization for SQUARE search method. | 
|  | void av1_init_motion_compensation_square(search_site_config *cfg, int stride, | 
|  | int level) { | 
|  | (void)level; | 
|  | cfg->stride = stride; | 
|  | // All scales have 8 closest points in square shape. | 
|  | static const int square_num_candidates[MAX_PATTERN_SCALES] = { | 
|  | 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, | 
|  | }; | 
|  |  | 
|  | // Square search method candidates. | 
|  | // Note that the largest candidate step at each scale is 2^scale. | 
|  | /* clang-format off */ | 
|  | static const FULLPEL_MV | 
|  | square_candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES] = { | 
|  | { { -1, -1 }, { 0, -1 }, { 1, -1 }, { 1, 0 }, { 1, 1 }, { 0, 1 }, | 
|  | { -1, 1 }, { -1, 0 } }, | 
|  | { { -2, -2 }, { 0, -2 }, { 2, -2 }, { 2, 0 }, { 2, 2 }, { 0, 2 }, | 
|  | { -2, 2 }, { -2, 0 } }, | 
|  | { { -4, -4 }, { 0, -4 }, { 4, -4 }, { 4, 0 }, { 4, 4 }, { 0, 4 }, | 
|  | { -4, 4 }, { -4, 0 } }, | 
|  | { { -8, -8 }, { 0, -8 }, { 8, -8 }, { 8, 0 }, { 8, 8 }, { 0, 8 }, | 
|  | { -8, 8 }, { -8, 0 } }, | 
|  | { { -16, -16 }, { 0, -16 }, { 16, -16 }, { 16, 0 }, { 16, 16 }, | 
|  | { 0, 16 }, { -16, 16 }, { -16, 0 } }, | 
|  | { { -32, -32 }, { 0, -32 }, { 32, -32 }, { 32, 0 }, { 32, 32 }, | 
|  | { 0, 32 }, { -32, 32 }, { -32, 0 } }, | 
|  | { { -64, -64 }, { 0, -64 }, { 64, -64 }, { 64, 0 }, { 64, 64 }, | 
|  | { 0, 64 }, { -64, 64 }, { -64, 0 } }, | 
|  | { { -128, -128 }, { 0, -128 }, { 128, -128 }, { 128, 0 }, | 
|  | { 128, 128 }, { 0, 128 }, { -128, 128 }, { -128, 0 } }, | 
|  | { { -256, -256 }, { 0, -256 }, { 256, -256 }, { 256, 0 }, | 
|  | { 256, 256 }, { 0, 256 }, { -256, 256 }, { -256, 0 } }, | 
|  | { { -512, -512 }, { 0, -512 }, { 512, -512 }, { 512, 0 }, | 
|  | { 512, 512 }, { 0, 512 }, { -512, 512 }, { -512, 0 } }, | 
|  | { { -1024, -1024 }, { 0, -1024 }, { 1024, -1024 }, { 1024, 0 }, | 
|  | { 1024, 1024 }, { 0, 1024 }, { -1024, 1024 }, { -1024, 0 } }, | 
|  | }; | 
|  |  | 
|  | /* clang-format on */ | 
|  | int radius = 1; | 
|  | for (int i = 0; i < MAX_PATTERN_SCALES; ++i) { | 
|  | cfg->searches_per_step[i] = square_num_candidates[i]; | 
|  | cfg->radius[i] = radius; | 
|  | for (int j = 0; j < MAX_PATTERN_CANDIDATES; ++j) { | 
|  | search_site *const site = &cfg->site[i][j]; | 
|  | site->mv = square_candidates[i][j]; | 
|  | site->offset = get_offset_from_fullmv(&site->mv, stride); | 
|  | } | 
|  | radius *= 2; | 
|  | } | 
|  | cfg->num_search_steps = MAX_PATTERN_SCALES; | 
|  | } | 
|  |  | 
|  | // Search site initialization for HEX / FAST_HEX search methods. | 
|  | void av1_init_motion_compensation_hex(search_site_config *cfg, int stride, | 
|  | int level) { | 
|  | (void)level; | 
|  | cfg->stride = stride; | 
|  | // First scale has 8-closest points, the rest have 6 points in hex shape | 
|  | // at increasing scales. | 
|  | static const int hex_num_candidates[MAX_PATTERN_SCALES] = { 8, 6, 6, 6, 6, 6, | 
|  | 6, 6, 6, 6, 6 }; | 
|  | // Note that the largest candidate step at each scale is 2^scale. | 
|  | /* clang-format off */ | 
|  | static const FULLPEL_MV | 
|  | hex_candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES] = { | 
|  | { { -1, -1 }, { 0, -1 }, { 1, -1 }, { 1, 0 }, { 1, 1 }, { 0, 1 }, | 
|  | { -1, 1 }, { -1, 0 } }, | 
|  | { { -1, -2 }, { 1, -2 }, { 2, 0 }, { 1, 2 }, { -1, 2 }, { -2, 0 } }, | 
|  | { { -2, -4 }, { 2, -4 }, { 4, 0 }, { 2, 4 }, { -2, 4 }, { -4, 0 } }, | 
|  | { { -4, -8 }, { 4, -8 }, { 8, 0 }, { 4, 8 }, { -4, 8 }, { -8, 0 } }, | 
|  | { { -8, -16 }, { 8, -16 }, { 16, 0 }, { 8, 16 }, | 
|  | { -8, 16 }, { -16, 0 } }, | 
|  | { { -16, -32 }, { 16, -32 }, { 32, 0 }, { 16, 32 }, { -16, 32 }, | 
|  | { -32, 0 } }, | 
|  | { { -32, -64 }, { 32, -64 }, { 64, 0 }, { 32, 64 }, { -32, 64 }, | 
|  | { -64, 0 } }, | 
|  | { { -64, -128 }, { 64, -128 }, { 128, 0 }, { 64, 128 }, | 
|  | { -64, 128 }, { -128, 0 } }, | 
|  | { { -128, -256 }, { 128, -256 }, { 256, 0 }, { 128, 256 }, | 
|  | { -128, 256 }, { -256, 0 } }, | 
|  | { { -256, -512 }, { 256, -512 }, { 512, 0 }, { 256, 512 }, | 
|  | { -256, 512 }, { -512, 0 } }, | 
|  | { { -512, -1024 }, { 512, -1024 }, { 1024, 0 }, { 512, 1024 }, | 
|  | { -512, 1024 }, { -1024, 0 } }, | 
|  | }; | 
|  |  | 
|  | /* clang-format on */ | 
|  | int radius = 1; | 
|  | for (int i = 0; i < MAX_PATTERN_SCALES; ++i) { | 
|  | cfg->searches_per_step[i] = hex_num_candidates[i]; | 
|  | cfg->radius[i] = radius; | 
|  | for (int j = 0; j < hex_num_candidates[i]; ++j) { | 
|  | search_site *const site = &cfg->site[i][j]; | 
|  | site->mv = hex_candidates[i][j]; | 
|  | site->offset = get_offset_from_fullmv(&site->mv, stride); | 
|  | } | 
|  | radius *= 2; | 
|  | } | 
|  | cfg->num_search_steps = MAX_PATTERN_SCALES; | 
|  | } | 
|  |  | 
|  | // Checks whether the mv is within range of the mv_limits | 
|  | static INLINE int check_bounds(const FullMvLimits *mv_limits, int row, int col, | 
|  | int range) { | 
|  | return ((row - range) >= mv_limits->row_min) & | 
|  | ((row + range) <= mv_limits->row_max) & | 
|  | ((col - range) >= mv_limits->col_min) & | 
|  | ((col + range) <= mv_limits->col_max); | 
|  | } | 
|  |  | 
|  | static INLINE int get_mvpred_var_cost( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV *this_mv) { | 
|  | const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | 
|  | const MV sub_this_mv = get_mv_from_fullmv(this_mv); | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const uint8_t *src_buf = src->buf; | 
|  | const int src_stride = src->stride; | 
|  | const int ref_stride = ref->stride; | 
|  |  | 
|  | unsigned unused; | 
|  | int bestsme; | 
|  |  | 
|  | bestsme = vfp->vf(src_buf, src_stride, get_buf_from_fullmv(ref, this_mv), | 
|  | ref_stride, &unused); | 
|  |  | 
|  | bestsme += mv_err_cost_(&sub_this_mv, &ms_params->mv_cost_params); | 
|  |  | 
|  | return bestsme; | 
|  | } | 
|  |  | 
|  | static INLINE int get_mvpred_sad(const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const struct buf_2d *const src, | 
|  | const uint8_t *const ref_address, | 
|  | const int ref_stride) { | 
|  | const uint8_t *src_buf = src->buf; | 
|  | const int src_stride = src->stride; | 
|  |  | 
|  | return ms_params->sdf(src_buf, src_stride, ref_address, ref_stride); | 
|  | } | 
|  |  | 
|  | static INLINE int get_mvpred_compound_var_cost( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV *this_mv) { | 
|  | const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const uint8_t *src_buf = src->buf; | 
|  | const int src_stride = src->stride; | 
|  | const int ref_stride = ref->stride; | 
|  |  | 
|  | const uint8_t *mask = ms_params->ms_buffers.mask; | 
|  | const uint8_t *second_pred = ms_params->ms_buffers.second_pred; | 
|  | const int mask_stride = ms_params->ms_buffers.mask_stride; | 
|  | const int invert_mask = ms_params->ms_buffers.inv_mask; | 
|  | unsigned unused; | 
|  | int bestsme; | 
|  |  | 
|  | if (mask) { | 
|  | bestsme = vfp->msvf(get_buf_from_fullmv(ref, this_mv), ref_stride, 0, 0, | 
|  | src_buf, src_stride, second_pred, mask, mask_stride, | 
|  | invert_mask, &unused); | 
|  | } else if (second_pred) { | 
|  | bestsme = vfp->svaf(get_buf_from_fullmv(ref, this_mv), ref_stride, 0, 0, | 
|  | src_buf, src_stride, &unused, second_pred); | 
|  | } else { | 
|  | bestsme = vfp->vf(src_buf, src_stride, get_buf_from_fullmv(ref, this_mv), | 
|  | ref_stride, &unused); | 
|  | } | 
|  |  | 
|  | const MV sub_this_mv = get_mv_from_fullmv(this_mv); | 
|  | bestsme += mv_err_cost_(&sub_this_mv, &ms_params->mv_cost_params); | 
|  |  | 
|  | return bestsme; | 
|  | } | 
|  |  | 
|  | static INLINE int get_mvpred_compound_sad( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const struct buf_2d *const src, const uint8_t *const ref_address, | 
|  | const int ref_stride) { | 
|  | const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | 
|  | const uint8_t *src_buf = src->buf; | 
|  | const int src_stride = src->stride; | 
|  |  | 
|  | const uint8_t *mask = ms_params->ms_buffers.mask; | 
|  | const uint8_t *second_pred = ms_params->ms_buffers.second_pred; | 
|  | const int mask_stride = ms_params->ms_buffers.mask_stride; | 
|  | const int invert_mask = ms_params->ms_buffers.inv_mask; | 
|  |  | 
|  | if (mask) { | 
|  | return vfp->msdf(src_buf, src_stride, ref_address, ref_stride, second_pred, | 
|  | mask, mask_stride, invert_mask); | 
|  | } else if (second_pred) { | 
|  | return vfp->sdaf(src_buf, src_stride, ref_address, ref_stride, second_pred); | 
|  | } else { | 
|  | return ms_params->sdf(src_buf, src_stride, ref_address, ref_stride); | 
|  | } | 
|  | } | 
|  |  | 
|  | // Calculates and returns a sad+mvcost list around an integer best pel during | 
|  | // fullpixel motion search. The resulting list can be used to speed up subpel | 
|  | // motion search later. | 
|  | #define USE_SAD_COSTLIST 1 | 
|  |  | 
|  | // calc_int_cost_list uses var to populate the costlist, which is more accurate | 
|  | // than sad but slightly slower. | 
|  | static AOM_FORCE_INLINE void calc_int_cost_list( | 
|  | const FULLPEL_MV best_mv, const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | int *cost_list) { | 
|  | static const FULLPEL_MV neighbors[4] = { | 
|  | { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 } | 
|  | }; | 
|  | const int br = best_mv.row; | 
|  | const int bc = best_mv.col; | 
|  |  | 
|  | cost_list[0] = get_mvpred_var_cost(ms_params, &best_mv); | 
|  |  | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1)) { | 
|  | for (int i = 0; i < 4; i++) { | 
|  | const FULLPEL_MV neighbor_mv = { br + neighbors[i].row, | 
|  | bc + neighbors[i].col }; | 
|  | cost_list[i + 1] = get_mvpred_var_cost(ms_params, &neighbor_mv); | 
|  | } | 
|  | } else { | 
|  | for (int i = 0; i < 4; i++) { | 
|  | const FULLPEL_MV neighbor_mv = { br + neighbors[i].row, | 
|  | bc + neighbors[i].col }; | 
|  | if (!av1_is_fullmv_in_range(&ms_params->mv_limits, neighbor_mv)) { | 
|  | cost_list[i + 1] = INT_MAX; | 
|  | } else { | 
|  | cost_list[i + 1] = get_mvpred_var_cost(ms_params, &neighbor_mv); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | // calc_int_sad_list uses sad to populate the costlist, which is less accurate | 
|  | // than var but faster. | 
|  | static AOM_FORCE_INLINE void calc_int_sad_list( | 
|  | const FULLPEL_MV best_mv, const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | int *cost_list, int costlist_has_sad) { | 
|  | static const FULLPEL_MV neighbors[4] = { | 
|  | { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 } | 
|  | }; | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const int ref_stride = ref->stride; | 
|  | const int br = best_mv.row; | 
|  | const int bc = best_mv.col; | 
|  |  | 
|  | assert(av1_is_fullmv_in_range(&ms_params->mv_limits, best_mv)); | 
|  |  | 
|  | // Refresh the costlist it does not contain valid sad | 
|  | if (!costlist_has_sad) { | 
|  | cost_list[0] = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &best_mv), ref_stride); | 
|  |  | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1)) { | 
|  | for (int i = 0; i < 4; i++) { | 
|  | const FULLPEL_MV this_mv = { br + neighbors[i].row, | 
|  | bc + neighbors[i].col }; | 
|  | cost_list[i + 1] = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | } | 
|  | } else { | 
|  | for (int i = 0; i < 4; i++) { | 
|  | const FULLPEL_MV this_mv = { br + neighbors[i].row, | 
|  | bc + neighbors[i].col }; | 
|  | if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) { | 
|  | cost_list[i + 1] = INT_MAX; | 
|  | } else { | 
|  | cost_list[i + 1] = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | cost_list[0] += mvsad_err_cost_(&best_mv, mv_cost_params); | 
|  |  | 
|  | for (int idx = 0; idx < 4; idx++) { | 
|  | if (cost_list[idx + 1] != INT_MAX) { | 
|  | const FULLPEL_MV this_mv = { br + neighbors[idx].row, | 
|  | bc + neighbors[idx].col }; | 
|  | cost_list[idx + 1] += mvsad_err_cost_(&this_mv, mv_cost_params); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | // Computes motion vector cost and adds to the sad cost. | 
|  | // Then updates the best sad and motion vectors. | 
|  | // Inputs: | 
|  | //   this_sad: the sad to be evaluated. | 
|  | //   mv: the current motion vector. | 
|  | //   mv_cost_params: a structure containing information to compute mv cost. | 
|  | //   best_sad: the current best sad. | 
|  | //   raw_best_sad (optional): the current best sad without calculating mv cost. | 
|  | //   best_mv: the current best motion vector. | 
|  | //   second_best_mv (optional): the second best motion vector up to now. | 
|  | // Modifies: | 
|  | //   best_sad, raw_best_sad, best_mv, second_best_mv | 
|  | //   If the current sad is lower than the current best sad. | 
|  | // Returns: | 
|  | //   Whether the input sad (mv) is better than the current best. | 
|  | static int update_mvs_and_sad(const unsigned int this_sad, const FULLPEL_MV *mv, | 
|  | const MV_COST_PARAMS *mv_cost_params, | 
|  | unsigned int *best_sad, | 
|  | unsigned int *raw_best_sad, FULLPEL_MV *best_mv, | 
|  | FULLPEL_MV *second_best_mv) { | 
|  | if (this_sad >= *best_sad) return 0; | 
|  |  | 
|  | // Add the motion vector cost. | 
|  | const unsigned int sad = this_sad + mvsad_err_cost_(mv, mv_cost_params); | 
|  | if (sad < *best_sad) { | 
|  | if (raw_best_sad) *raw_best_sad = this_sad; | 
|  | *best_sad = sad; | 
|  | if (second_best_mv) *second_best_mv = *best_mv; | 
|  | *best_mv = *mv; | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | // Calculate sad4 and update the bestmv information | 
|  | // in FAST_DIAMOND search method. | 
|  | static void calc_sad4_update_bestmv( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, FULLPEL_MV *best_mv, | 
|  | FULLPEL_MV *temp_best_mv, unsigned int *bestsad, unsigned int *raw_bestsad, | 
|  | int search_step, int *best_site, int cand_start) { | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const search_site *site = ms_params->search_sites->site[search_step]; | 
|  |  | 
|  | unsigned char const *block_offset[4]; | 
|  | unsigned int sads[4]; | 
|  | const uint8_t *best_address; | 
|  | const uint8_t *src_buf = src->buf; | 
|  | const int src_stride = src->stride; | 
|  | best_address = get_buf_from_fullmv(ref, temp_best_mv); | 
|  | // Loop over number of candidates. | 
|  | for (int j = 0; j < 4; j++) | 
|  | block_offset[j] = site[cand_start + j].offset + best_address; | 
|  |  | 
|  | // 4-point sad calculation. | 
|  | ms_params->sdx4df(src_buf, src_stride, block_offset, ref->stride, sads); | 
|  |  | 
|  | for (int j = 0; j < 4; j++) { | 
|  | const FULLPEL_MV this_mv = { | 
|  | temp_best_mv->row + site[cand_start + j].mv.row, | 
|  | temp_best_mv->col + site[cand_start + j].mv.col | 
|  | }; | 
|  | const int found_better_mv = update_mvs_and_sad( | 
|  | sads[j], &this_mv, mv_cost_params, bestsad, raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) *best_site = cand_start + j; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Calculate sad and update the bestmv information | 
|  | // in FAST_DIAMOND search method. | 
|  | static void calc_sad_update_bestmv( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, FULLPEL_MV *best_mv, | 
|  | FULLPEL_MV *temp_best_mv, unsigned int *bestsad, unsigned int *raw_bestsad, | 
|  | int search_step, int *best_site, const int num_candidates, int cand_start) { | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const search_site *site = ms_params->search_sites->site[search_step]; | 
|  | // Loop over number of candidates. | 
|  | for (int i = cand_start; i < num_candidates; i++) { | 
|  | const FULLPEL_MV this_mv = { temp_best_mv->row + site[i].mv.row, | 
|  | temp_best_mv->col + site[i].mv.col }; | 
|  | if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) continue; | 
|  | int thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref->stride); | 
|  | const int found_better_mv = update_mvs_and_sad( | 
|  | thissad, &this_mv, mv_cost_params, bestsad, raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) *best_site = i; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Generic pattern search function that searches over multiple scales. | 
|  | // Each scale can have a different number of candidates and shape of | 
|  | // candidates as indicated in the num_candidates and candidates arrays | 
|  | // passed into this function | 
|  | static int pattern_search(FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | static const int search_steps[MAX_MVSEARCH_STEPS] = { | 
|  | 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, | 
|  | }; | 
|  | int i, s, t; | 
|  |  | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const search_site_config *search_sites = ms_params->search_sites; | 
|  | const int *num_candidates = search_sites->searches_per_step; | 
|  | const int ref_stride = ref->stride; | 
|  | const int last_is_4 = num_candidates[0] == 4; | 
|  | int br, bc; | 
|  | unsigned int bestsad = UINT_MAX, raw_bestsad = UINT_MAX; | 
|  | int thissad; | 
|  | int k = -1; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | search_step = AOMMIN(search_step, MAX_MVSEARCH_STEPS - 1); | 
|  | assert(search_step >= 0); | 
|  | int best_init_s = search_steps[search_step]; | 
|  | // adjust ref_mv to make sure it is within MV range | 
|  | clamp_fullmv(&start_mv, &ms_params->mv_limits); | 
|  | br = start_mv.row; | 
|  | bc = start_mv.col; | 
|  | if (cost_list != NULL) { | 
|  | cost_list[0] = cost_list[1] = cost_list[2] = cost_list[3] = cost_list[4] = | 
|  | INT_MAX; | 
|  | } | 
|  | int costlist_has_sad = 0; | 
|  |  | 
|  | // Work out the start point for the search | 
|  | raw_bestsad = get_mvpred_sad(ms_params, src, | 
|  | get_buf_from_fullmv(ref, &start_mv), ref_stride); | 
|  | bestsad = raw_bestsad + mvsad_err_cost_(&start_mv, mv_cost_params); | 
|  |  | 
|  | // Search all possible scales up to the search param around the center point | 
|  | // pick the scale of the point that is best as the starting scale of | 
|  | // further steps around it. | 
|  | if (do_init_search) { | 
|  | s = best_init_s; | 
|  | best_init_s = -1; | 
|  | for (t = 0; t <= s; ++t) { | 
|  | int best_site = -1; | 
|  | FULLPEL_MV temp_best_mv; | 
|  | temp_best_mv.row = br; | 
|  | temp_best_mv.col = bc; | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1 << t)) { | 
|  | // Call 4-point sad for multiples of 4 candidates. | 
|  | const int no_of_4_cand_loops = num_candidates[t] >> 2; | 
|  | for (i = 0; i < no_of_4_cand_loops; i++) { | 
|  | calc_sad4_update_bestmv(ms_params, mv_cost_params, best_mv, | 
|  | &temp_best_mv, &bestsad, &raw_bestsad, t, | 
|  | &best_site, i * 4); | 
|  | } | 
|  | // Rest of the candidates | 
|  | const int remaining_cand = num_candidates[t] % 4; | 
|  | calc_sad_update_bestmv(ms_params, mv_cost_params, best_mv, | 
|  | &temp_best_mv, &bestsad, &raw_bestsad, t, | 
|  | &best_site, remaining_cand, | 
|  | no_of_4_cand_loops * 4); | 
|  | } else { | 
|  | calc_sad_update_bestmv(ms_params, mv_cost_params, best_mv, | 
|  | &temp_best_mv, &bestsad, &raw_bestsad, t, | 
|  | &best_site, num_candidates[t], 0); | 
|  | } | 
|  | if (best_site == -1) { | 
|  | continue; | 
|  | } else { | 
|  | best_init_s = t; | 
|  | k = best_site; | 
|  | } | 
|  | } | 
|  | if (best_init_s != -1) { | 
|  | br += search_sites->site[best_init_s][k].mv.row; | 
|  | bc += search_sites->site[best_init_s][k].mv.col; | 
|  | } | 
|  | } | 
|  |  | 
|  | // If the center point is still the best, just skip this and move to | 
|  | // the refinement step. | 
|  | if (best_init_s != -1) { | 
|  | const int last_s = (last_is_4 && cost_list != NULL); | 
|  | int best_site = -1; | 
|  | s = best_init_s; | 
|  |  | 
|  | for (; s >= last_s; s--) { | 
|  | // No need to search all points the 1st time if initial search was used | 
|  | if (!do_init_search || s != best_init_s) { | 
|  | FULLPEL_MV temp_best_mv; | 
|  | temp_best_mv.row = br; | 
|  | temp_best_mv.col = bc; | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | 
|  | // Call 4-point sad for multiples of 4 candidates. | 
|  | const int no_of_4_cand_loops = num_candidates[s] >> 2; | 
|  | for (i = 0; i < no_of_4_cand_loops; i++) { | 
|  | calc_sad4_update_bestmv(ms_params, mv_cost_params, best_mv, | 
|  | &temp_best_mv, &bestsad, &raw_bestsad, s, | 
|  | &best_site, i * 4); | 
|  | } | 
|  | // Rest of the candidates | 
|  | const int remaining_cand = num_candidates[s] % 4; | 
|  | calc_sad_update_bestmv(ms_params, mv_cost_params, best_mv, | 
|  | &temp_best_mv, &bestsad, &raw_bestsad, s, | 
|  | &best_site, remaining_cand, | 
|  | no_of_4_cand_loops * 4); | 
|  | } else { | 
|  | calc_sad_update_bestmv(ms_params, mv_cost_params, best_mv, | 
|  | &temp_best_mv, &bestsad, &raw_bestsad, s, | 
|  | &best_site, num_candidates[s], 0); | 
|  | } | 
|  |  | 
|  | if (best_site == -1) { | 
|  | continue; | 
|  | } else { | 
|  | br += search_sites->site[s][best_site].mv.row; | 
|  | bc += search_sites->site[s][best_site].mv.col; | 
|  | k = best_site; | 
|  | } | 
|  | } | 
|  |  | 
|  | do { | 
|  | int next_chkpts_indices[PATTERN_CANDIDATES_REF]; | 
|  | best_site = -1; | 
|  | next_chkpts_indices[0] = (k == 0) ? num_candidates[s] - 1 : k - 1; | 
|  | next_chkpts_indices[1] = k; | 
|  | next_chkpts_indices[2] = (k == num_candidates[s] - 1) ? 0 : k + 1; | 
|  |  | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | 
|  | for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | 
|  | const FULLPEL_MV this_mv = { | 
|  | br + search_sites->site[s][next_chkpts_indices[i]].mv.row, | 
|  | bc + search_sites->site[s][next_chkpts_indices[i]].mv.col | 
|  | }; | 
|  | thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | const int found_better_mv = | 
|  | update_mvs_and_sad(thissad, &this_mv, mv_cost_params, &bestsad, | 
|  | &raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) best_site = i; | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | 
|  | const FULLPEL_MV this_mv = { | 
|  | br + search_sites->site[s][next_chkpts_indices[i]].mv.row, | 
|  | bc + search_sites->site[s][next_chkpts_indices[i]].mv.col | 
|  | }; | 
|  | if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) | 
|  | continue; | 
|  | thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | const int found_better_mv = | 
|  | update_mvs_and_sad(thissad, &this_mv, mv_cost_params, &bestsad, | 
|  | &raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) best_site = i; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site != -1) { | 
|  | k = next_chkpts_indices[best_site]; | 
|  | br += search_sites->site[s][k].mv.row; | 
|  | bc += search_sites->site[s][k].mv.col; | 
|  | } | 
|  | } while (best_site != -1); | 
|  | } | 
|  |  | 
|  | // Note: If we enter the if below, then cost_list must be non-NULL. | 
|  | if (s == 0) { | 
|  | cost_list[0] = raw_bestsad; | 
|  | costlist_has_sad = 1; | 
|  | if (!do_init_search || s != best_init_s) { | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | 
|  | for (i = 0; i < num_candidates[s]; i++) { | 
|  | const FULLPEL_MV this_mv = { br + search_sites->site[s][i].mv.row, | 
|  | bc + search_sites->site[s][i].mv.col }; | 
|  | cost_list[i + 1] = thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | const int found_better_mv = | 
|  | update_mvs_and_sad(thissad, &this_mv, mv_cost_params, &bestsad, | 
|  | &raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) best_site = i; | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < num_candidates[s]; i++) { | 
|  | const FULLPEL_MV this_mv = { br + search_sites->site[s][i].mv.row, | 
|  | bc + search_sites->site[s][i].mv.col }; | 
|  | if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) | 
|  | continue; | 
|  | cost_list[i + 1] = thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | const int found_better_mv = | 
|  | update_mvs_and_sad(thissad, &this_mv, mv_cost_params, &bestsad, | 
|  | &raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) best_site = i; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site != -1) { | 
|  | br += search_sites->site[s][best_site].mv.row; | 
|  | bc += search_sites->site[s][best_site].mv.col; | 
|  | k = best_site; | 
|  | } | 
|  | } | 
|  | while (best_site != -1) { | 
|  | int next_chkpts_indices[PATTERN_CANDIDATES_REF]; | 
|  | best_site = -1; | 
|  | next_chkpts_indices[0] = (k == 0) ? num_candidates[s] - 1 : k - 1; | 
|  | next_chkpts_indices[1] = k; | 
|  | next_chkpts_indices[2] = (k == num_candidates[s] - 1) ? 0 : k + 1; | 
|  | cost_list[1] = cost_list[2] = cost_list[3] = cost_list[4] = INT_MAX; | 
|  | cost_list[((k + 2) % 4) + 1] = cost_list[0]; | 
|  | cost_list[0] = raw_bestsad; | 
|  |  | 
|  | if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | 
|  | for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | 
|  | const FULLPEL_MV this_mv = { | 
|  | br + search_sites->site[s][next_chkpts_indices[i]].mv.row, | 
|  | bc + search_sites->site[s][next_chkpts_indices[i]].mv.col | 
|  | }; | 
|  | cost_list[next_chkpts_indices[i] + 1] = thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | const int found_better_mv = | 
|  | update_mvs_and_sad(thissad, &this_mv, mv_cost_params, &bestsad, | 
|  | &raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) best_site = i; | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | 
|  | const FULLPEL_MV this_mv = { | 
|  | br + search_sites->site[s][next_chkpts_indices[i]].mv.row, | 
|  | bc + search_sites->site[s][next_chkpts_indices[i]].mv.col | 
|  | }; | 
|  | if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) { | 
|  | cost_list[next_chkpts_indices[i] + 1] = INT_MAX; | 
|  | continue; | 
|  | } | 
|  | cost_list[next_chkpts_indices[i] + 1] = thissad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &this_mv), ref_stride); | 
|  | const int found_better_mv = | 
|  | update_mvs_and_sad(thissad, &this_mv, mv_cost_params, &bestsad, | 
|  | &raw_bestsad, best_mv, | 
|  | /*second_best_mv=*/NULL); | 
|  | if (found_better_mv) best_site = i; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site != -1) { | 
|  | k = next_chkpts_indices[best_site]; | 
|  | br += search_sites->site[s][k].mv.row; | 
|  | bc += search_sites->site[s][k].mv.col; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | best_mv->row = br; | 
|  | best_mv->col = bc; | 
|  |  | 
|  | // Returns the one-away integer pel cost/sad around the best as follows: | 
|  | // cost_list[0]: cost/sad at the best integer pel | 
|  | // cost_list[1]: cost/sad at delta {0, -1} (left)   from the best integer pel | 
|  | // cost_list[2]: cost/sad at delta { 1, 0} (bottom) from the best integer pel | 
|  | // cost_list[3]: cost/sad at delta { 0, 1} (right)  from the best integer pel | 
|  | // cost_list[4]: cost/sad at delta {-1, 0} (top)    from the best integer pel | 
|  | if (cost_list) { | 
|  | if (USE_SAD_COSTLIST) { | 
|  | calc_int_sad_list(*best_mv, ms_params, cost_list, costlist_has_sad); | 
|  | } else { | 
|  | calc_int_cost_list(*best_mv, ms_params, cost_list); | 
|  | } | 
|  | } | 
|  | best_mv->row = br; | 
|  | best_mv->col = bc; | 
|  |  | 
|  | const int var_cost = get_mvpred_var_cost(ms_params, best_mv); | 
|  | return var_cost; | 
|  | } | 
|  |  | 
|  | // For the following foo_search, the input arguments are: | 
|  | // start_mv: where we are starting our motion search | 
|  | // ms_params: a collection of motion search parameters | 
|  | // search_step: how many steps to skip in our motion search. For example, | 
|  | //   a value 3 suggests that 3 search steps have already taken place prior to | 
|  | //   this function call, so we jump directly to step 4 of the search process | 
|  | // do_init_search: if on, do an initial search of all possible scales around the | 
|  | //   start_mv, and then pick the best scale. | 
|  | // cond_list: used to hold the cost around the best full mv so we can use it to | 
|  | //   speed up subpel search later. | 
|  | // best_mv: the best mv found in the motion search | 
|  | static int hex_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | return pattern_search(start_mv, ms_params, search_step, do_init_search, | 
|  | cost_list, best_mv); | 
|  | } | 
|  |  | 
|  | static int bigdia_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | return pattern_search(start_mv, ms_params, search_step, do_init_search, | 
|  | cost_list, best_mv); | 
|  | } | 
|  |  | 
|  | static int square_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | return pattern_search(start_mv, ms_params, search_step, do_init_search, | 
|  | cost_list, best_mv); | 
|  | } | 
|  |  | 
|  | static int fast_hex_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | return hex_search(start_mv, ms_params, | 
|  | AOMMAX(MAX_MVSEARCH_STEPS - 2, search_step), do_init_search, | 
|  | cost_list, best_mv); | 
|  | } | 
|  |  | 
|  | static int fast_dia_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | return bigdia_search(start_mv, ms_params, | 
|  | AOMMAX(MAX_MVSEARCH_STEPS - 2, search_step), | 
|  | do_init_search, cost_list, best_mv); | 
|  | } | 
|  |  | 
|  | static int fast_bigdia_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, const int do_init_search, | 
|  | int *cost_list, FULLPEL_MV *best_mv) { | 
|  | return bigdia_search(start_mv, ms_params, | 
|  | AOMMAX(MAX_MVSEARCH_STEPS - 3, search_step), | 
|  | do_init_search, cost_list, best_mv); | 
|  | } | 
|  |  | 
|  | static int diamond_search_sad(FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int search_step, int *num00, | 
|  | FULLPEL_MV *best_mv, FULLPEL_MV *second_best_mv) { | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  |  | 
|  | const int ref_stride = ref->stride; | 
|  | const uint8_t *best_address; | 
|  |  | 
|  | const uint8_t *mask = ms_params->ms_buffers.mask; | 
|  | const uint8_t *second_pred = ms_params->ms_buffers.second_pred; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  |  | 
|  | const search_site_config *cfg = ms_params->search_sites; | 
|  |  | 
|  | unsigned int bestsad = INT_MAX; | 
|  | int best_site = 0; | 
|  | int is_off_center = 0; | 
|  |  | 
|  | clamp_fullmv(&start_mv, &ms_params->mv_limits); | 
|  |  | 
|  | // search_step determines the length of the initial step and hence the number | 
|  | // of iterations. | 
|  | const int tot_steps = cfg->num_search_steps - search_step; | 
|  |  | 
|  | *num00 = 0; | 
|  | *best_mv = start_mv; | 
|  |  | 
|  | // Check the starting position | 
|  | best_address = get_buf_from_fullmv(ref, &start_mv); | 
|  | bestsad = get_mvpred_compound_sad(ms_params, src, best_address, ref_stride); | 
|  | bestsad += mvsad_err_cost_(best_mv, &ms_params->mv_cost_params); | 
|  |  | 
|  | int next_step_size = tot_steps > 2 ? cfg->radius[tot_steps - 2] : 1; | 
|  | for (int step = tot_steps - 1; step >= 0; --step) { | 
|  | const search_site *site = cfg->site[step]; | 
|  | best_site = 0; | 
|  | if (step > 0) next_step_size = cfg->radius[step - 1]; | 
|  |  | 
|  | int all_in = 1, j; | 
|  | // Trap illegal vectors | 
|  | all_in &= best_mv->row + site[1].mv.row >= ms_params->mv_limits.row_min; | 
|  | all_in &= best_mv->row + site[2].mv.row <= ms_params->mv_limits.row_max; | 
|  | all_in &= best_mv->col + site[3].mv.col >= ms_params->mv_limits.col_min; | 
|  | all_in &= best_mv->col + site[4].mv.col <= ms_params->mv_limits.col_max; | 
|  |  | 
|  | // TODO(anyone): Implement 4 points search for msdf&sdaf | 
|  | if (all_in && !mask && !second_pred) { | 
|  | const uint8_t *src_buf = src->buf; | 
|  | const int src_stride = src->stride; | 
|  | for (int idx = 1; idx <= cfg->searches_per_step[step]; idx += 4) { | 
|  | unsigned char const *block_offset[4]; | 
|  | unsigned int sads[4]; | 
|  |  | 
|  | for (j = 0; j < 4; j++) | 
|  | block_offset[j] = site[idx + j].offset + best_address; | 
|  |  | 
|  | ms_params->sdx4df(src_buf, src_stride, block_offset, ref_stride, sads); | 
|  | for (j = 0; j < 4; j++) { | 
|  | if (sads[j] < bestsad) { | 
|  | const FULLPEL_MV this_mv = { best_mv->row + site[idx + j].mv.row, | 
|  | best_mv->col + site[idx + j].mv.col }; | 
|  | unsigned int thissad = | 
|  | sads[j] + mvsad_err_cost_(&this_mv, mv_cost_params); | 
|  | if (thissad < bestsad) { | 
|  | bestsad = thissad; | 
|  | best_site = idx + j; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } else { | 
|  | for (int idx = 1; idx <= cfg->searches_per_step[step]; idx++) { | 
|  | const FULLPEL_MV this_mv = { best_mv->row + site[idx].mv.row, | 
|  | best_mv->col + site[idx].mv.col }; | 
|  |  | 
|  | if (av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) { | 
|  | const uint8_t *const check_here = site[idx].offset + best_address; | 
|  | unsigned int thissad; | 
|  |  | 
|  | thissad = | 
|  | get_mvpred_compound_sad(ms_params, src, check_here, ref_stride); | 
|  |  | 
|  | if (thissad < bestsad) { | 
|  | thissad += mvsad_err_cost_(&this_mv, mv_cost_params); | 
|  | if (thissad < bestsad) { | 
|  | bestsad = thissad; | 
|  | best_site = idx; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site != 0) { | 
|  | if (second_best_mv) { | 
|  | *second_best_mv = *best_mv; | 
|  | } | 
|  | best_mv->row += site[best_site].mv.row; | 
|  | best_mv->col += site[best_site].mv.col; | 
|  | best_address += site[best_site].offset; | 
|  | is_off_center = 1; | 
|  | } | 
|  |  | 
|  | if (is_off_center == 0) (*num00)++; | 
|  |  | 
|  | if (best_site == 0) { | 
|  | while (next_step_size == cfg->radius[step] && step > 2) { | 
|  | ++(*num00); | 
|  | --step; | 
|  | next_step_size = cfg->radius[step - 1]; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return bestsad; | 
|  | } | 
|  |  | 
|  | /* do_refine: If last step (1-away) of n-step search doesn't pick the center | 
|  | point as the best match, we will do a final 1-away diamond | 
|  | refining search  */ | 
|  | static int full_pixel_diamond(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int step_param, int *cost_list, | 
|  | FULLPEL_MV *best_mv, FULLPEL_MV *second_best_mv) { | 
|  | const search_site_config *cfg = ms_params->search_sites; | 
|  | int thissme, n, num00 = 0; | 
|  | int bestsme = diamond_search_sad(start_mv, ms_params, step_param, &n, best_mv, | 
|  | second_best_mv); | 
|  |  | 
|  | if (bestsme < INT_MAX) { | 
|  | bestsme = get_mvpred_compound_var_cost(ms_params, best_mv); | 
|  | } | 
|  |  | 
|  | // If there won't be more n-step search, check to see if refining search is | 
|  | // needed. | 
|  | const int further_steps = cfg->num_search_steps - 1 - step_param; | 
|  | while (n < further_steps) { | 
|  | ++n; | 
|  |  | 
|  | if (num00) { | 
|  | num00--; | 
|  | } else { | 
|  | // TODO(chiyotsai@google.com): There is another bug here where the second | 
|  | // best mv gets incorrectly overwritten. Fix it later. | 
|  | FULLPEL_MV tmp_best_mv; | 
|  | thissme = diamond_search_sad(start_mv, ms_params, step_param + n, &num00, | 
|  | &tmp_best_mv, second_best_mv); | 
|  |  | 
|  | if (thissme < INT_MAX) { | 
|  | thissme = get_mvpred_compound_var_cost(ms_params, &tmp_best_mv); | 
|  | } | 
|  |  | 
|  | if (thissme < bestsme) { | 
|  | bestsme = thissme; | 
|  | *best_mv = tmp_best_mv; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | // Return cost list. | 
|  | if (cost_list) { | 
|  | if (USE_SAD_COSTLIST) { | 
|  | const int costlist_has_sad = 0; | 
|  | calc_int_sad_list(*best_mv, ms_params, cost_list, costlist_has_sad); | 
|  | } else { | 
|  | calc_int_cost_list(*best_mv, ms_params, cost_list); | 
|  | } | 
|  | } | 
|  | return bestsme; | 
|  | } | 
|  |  | 
|  | // Exhaustive motion search around a given centre position with a given | 
|  | // step size. | 
|  | static int exhaustive_mesh_search(FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int range, const int step, | 
|  | FULLPEL_MV *best_mv, | 
|  | FULLPEL_MV *second_best_mv) { | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const struct buf_2d *const src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *const ref = ms_params->ms_buffers.ref; | 
|  | const int ref_stride = ref->stride; | 
|  | unsigned int best_sad = INT_MAX; | 
|  | int r, c, i; | 
|  | int start_col, end_col, start_row, end_row; | 
|  | const int col_step = (step > 1) ? step : 4; | 
|  |  | 
|  | assert(step >= 1); | 
|  |  | 
|  | clamp_fullmv(&start_mv, &ms_params->mv_limits); | 
|  | *best_mv = start_mv; | 
|  | best_sad = get_mvpred_sad(ms_params, src, get_buf_from_fullmv(ref, &start_mv), | 
|  | ref_stride); | 
|  | best_sad += mvsad_err_cost_(&start_mv, mv_cost_params); | 
|  | start_row = AOMMAX(-range, ms_params->mv_limits.row_min - start_mv.row); | 
|  | start_col = AOMMAX(-range, ms_params->mv_limits.col_min - start_mv.col); | 
|  | end_row = AOMMIN(range, ms_params->mv_limits.row_max - start_mv.row); | 
|  | end_col = AOMMIN(range, ms_params->mv_limits.col_max - start_mv.col); | 
|  |  | 
|  | for (r = start_row; r <= end_row; r += step) { | 
|  | for (c = start_col; c <= end_col; c += col_step) { | 
|  | // Step > 1 means we are not checking every location in this pass. | 
|  | if (step > 1) { | 
|  | const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c }; | 
|  | unsigned int sad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &mv), ref_stride); | 
|  | update_mvs_and_sad(sad, &mv, mv_cost_params, &best_sad, | 
|  | /*raw_best_sad=*/NULL, best_mv, second_best_mv); | 
|  | } else { | 
|  | // 4 sads in a single call if we are checking every location | 
|  | if (c + 3 <= end_col) { | 
|  | unsigned int sads[4]; | 
|  | const uint8_t *addrs[4]; | 
|  | for (i = 0; i < 4; ++i) { | 
|  | const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c + i }; | 
|  | addrs[i] = get_buf_from_fullmv(ref, &mv); | 
|  | } | 
|  |  | 
|  | ms_params->sdx4df(src->buf, src->stride, addrs, ref_stride, sads); | 
|  |  | 
|  | for (i = 0; i < 4; ++i) { | 
|  | if (sads[i] < best_sad) { | 
|  | const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c + i }; | 
|  | update_mvs_and_sad(sads[i], &mv, mv_cost_params, &best_sad, | 
|  | /*raw_best_sad=*/NULL, best_mv, | 
|  | second_best_mv); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < end_col - c; ++i) { | 
|  | const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c + i }; | 
|  | unsigned int sad = get_mvpred_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &mv), ref_stride); | 
|  | update_mvs_and_sad(sad, &mv, mv_cost_params, &best_sad, | 
|  | /*raw_best_sad=*/NULL, best_mv, second_best_mv); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return best_sad; | 
|  | } | 
|  |  | 
|  | // Runs an limited range exhaustive mesh search using a pattern set | 
|  | // according to the encode speed profile. | 
|  | static int full_pixel_exhaustive(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const struct MESH_PATTERN *const mesh_patterns, | 
|  | int *cost_list, FULLPEL_MV *best_mv, | 
|  | FULLPEL_MV *second_best_mv) { | 
|  | const int kMinRange = 7; | 
|  | const int kMaxRange = 256; | 
|  | const int kMinInterval = 1; | 
|  |  | 
|  | int bestsme; | 
|  | int i; | 
|  | int interval = mesh_patterns[0].interval; | 
|  | int range = mesh_patterns[0].range; | 
|  | int baseline_interval_divisor; | 
|  |  | 
|  | *best_mv = start_mv; | 
|  |  | 
|  | // Trap illegal values for interval and range for this function. | 
|  | if ((range < kMinRange) || (range > kMaxRange) || (interval < kMinInterval) || | 
|  | (interval > range)) | 
|  | return INT_MAX; | 
|  |  | 
|  | baseline_interval_divisor = range / interval; | 
|  |  | 
|  | // Check size of proposed first range against magnitude of the centre | 
|  | // value used as a starting point. | 
|  | range = AOMMAX(range, (5 * AOMMAX(abs(best_mv->row), abs(best_mv->col))) / 4); | 
|  | range = AOMMIN(range, kMaxRange); | 
|  | interval = AOMMAX(interval, range / baseline_interval_divisor); | 
|  | // Use a small search step/interval for certain kind of clips. | 
|  | // For example, screen content clips with a lot of texts. | 
|  | // Large interval could lead to a false matching position, and it can't find | 
|  | // the best global candidate in following iterations due to reduced search | 
|  | // range. The solution here is to use a small search iterval in the beginning | 
|  | // and thus reduces the chance of missing the best candidate. | 
|  | if (ms_params->fine_search_interval) { | 
|  | interval = AOMMIN(interval, 4); | 
|  | } | 
|  |  | 
|  | // initial search | 
|  | bestsme = exhaustive_mesh_search(*best_mv, ms_params, range, interval, | 
|  | best_mv, second_best_mv); | 
|  |  | 
|  | if ((interval > kMinInterval) && (range > kMinRange)) { | 
|  | // Progressive searches with range and step size decreasing each time | 
|  | // till we reach a step size of 1. Then break out. | 
|  | for (i = 1; i < MAX_MESH_STEP; ++i) { | 
|  | // First pass with coarser step and longer range | 
|  | bestsme = exhaustive_mesh_search( | 
|  | *best_mv, ms_params, mesh_patterns[i].range, | 
|  | mesh_patterns[i].interval, best_mv, second_best_mv); | 
|  |  | 
|  | if (mesh_patterns[i].interval == 1) break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bestsme < INT_MAX) { | 
|  | bestsme = get_mvpred_var_cost(ms_params, best_mv); | 
|  | } | 
|  |  | 
|  | // Return cost list. | 
|  | if (cost_list) { | 
|  | if (USE_SAD_COSTLIST) { | 
|  | const int costlist_has_sad = 0; | 
|  | calc_int_sad_list(*best_mv, ms_params, cost_list, costlist_has_sad); | 
|  | } else { | 
|  | calc_int_cost_list(*best_mv, ms_params, cost_list); | 
|  | } | 
|  | } | 
|  | return bestsme; | 
|  | } | 
|  |  | 
|  | // This function is called when we do joint motion search in comp_inter_inter | 
|  | // mode, or when searching for one component of an ext-inter compound mode. | 
|  | int av1_refining_search_8p_c(const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const FULLPEL_MV start_mv, FULLPEL_MV *best_mv) { | 
|  | static const search_neighbors neighbors[8] = { | 
|  | { { -1, 0 }, -1 * SEARCH_GRID_STRIDE_8P + 0 }, | 
|  | { { 0, -1 }, 0 * SEARCH_GRID_STRIDE_8P - 1 }, | 
|  | { { 0, 1 }, 0 * SEARCH_GRID_STRIDE_8P + 1 }, | 
|  | { { 1, 0 }, 1 * SEARCH_GRID_STRIDE_8P + 0 }, | 
|  | { { -1, -1 }, -1 * SEARCH_GRID_STRIDE_8P - 1 }, | 
|  | { { 1, -1 }, 1 * SEARCH_GRID_STRIDE_8P - 1 }, | 
|  | { { -1, 1 }, -1 * SEARCH_GRID_STRIDE_8P + 1 }, | 
|  | { { 1, 1 }, 1 * SEARCH_GRID_STRIDE_8P + 1 } | 
|  | }; | 
|  |  | 
|  | uint8_t do_refine_search_grid[SEARCH_GRID_STRIDE_8P * | 
|  | SEARCH_GRID_STRIDE_8P] = { 0 }; | 
|  | int grid_center = SEARCH_GRID_CENTER_8P; | 
|  | int grid_coord = grid_center; | 
|  |  | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const FullMvLimits *mv_limits = &ms_params->mv_limits; | 
|  | const MSBuffers *ms_buffers = &ms_params->ms_buffers; | 
|  | const struct buf_2d *src = ms_buffers->src; | 
|  | const struct buf_2d *ref = ms_buffers->ref; | 
|  | const int ref_stride = ref->stride; | 
|  |  | 
|  | *best_mv = start_mv; | 
|  | clamp_fullmv(best_mv, mv_limits); | 
|  |  | 
|  | unsigned int best_sad = get_mvpred_compound_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, best_mv), ref_stride); | 
|  | best_sad += mvsad_err_cost_(best_mv, mv_cost_params); | 
|  |  | 
|  | do_refine_search_grid[grid_coord] = 1; | 
|  |  | 
|  | for (int i = 0; i < SEARCH_RANGE_8P; ++i) { | 
|  | int best_site = -1; | 
|  |  | 
|  | for (int j = 0; j < 8; ++j) { | 
|  | grid_coord = grid_center + neighbors[j].coord_offset; | 
|  | if (do_refine_search_grid[grid_coord] == 1) { | 
|  | continue; | 
|  | } | 
|  | const FULLPEL_MV mv = { best_mv->row + neighbors[j].coord.row, | 
|  | best_mv->col + neighbors[j].coord.col }; | 
|  |  | 
|  | do_refine_search_grid[grid_coord] = 1; | 
|  | if (av1_is_fullmv_in_range(mv_limits, mv)) { | 
|  | unsigned int sad; | 
|  | sad = get_mvpred_compound_sad( | 
|  | ms_params, src, get_buf_from_fullmv(ref, &mv), ref_stride); | 
|  | if (sad < best_sad) { | 
|  | sad += mvsad_err_cost_(&mv, mv_cost_params); | 
|  |  | 
|  | if (sad < best_sad) { | 
|  | best_sad = sad; | 
|  | best_site = j; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site == -1) { | 
|  | break; | 
|  | } else { | 
|  | best_mv->row += neighbors[best_site].coord.row; | 
|  | best_mv->col += neighbors[best_site].coord.col; | 
|  | grid_center += neighbors[best_site].coord_offset; | 
|  | } | 
|  | } | 
|  | return best_sad; | 
|  | } | 
|  |  | 
|  | int av1_full_pixel_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int step_param, int *cost_list, | 
|  | FULLPEL_MV *best_mv, FULLPEL_MV *second_best_mv) { | 
|  | const BLOCK_SIZE bsize = ms_params->bsize; | 
|  | const SEARCH_METHODS search_method = ms_params->search_method; | 
|  |  | 
|  | const int is_intra_mode = ms_params->is_intra_mode; | 
|  | int run_mesh_search = ms_params->run_mesh_search; | 
|  |  | 
|  | int var = 0; | 
|  | MARK_MV_INVALID(best_mv); | 
|  | if (second_best_mv) { | 
|  | MARK_MV_INVALID(second_best_mv); | 
|  | } | 
|  |  | 
|  | if (cost_list) { | 
|  | cost_list[0] = INT_MAX; | 
|  | cost_list[1] = INT_MAX; | 
|  | cost_list[2] = INT_MAX; | 
|  | cost_list[3] = INT_MAX; | 
|  | cost_list[4] = INT_MAX; | 
|  | } | 
|  |  | 
|  | assert(ms_params->ms_buffers.ref->stride == ms_params->search_sites->stride); | 
|  |  | 
|  | switch (search_method) { | 
|  | case FAST_BIGDIA: | 
|  | var = fast_bigdia_search(start_mv, ms_params, step_param, 0, cost_list, | 
|  | best_mv); | 
|  | break; | 
|  | case FAST_DIAMOND: | 
|  | var = fast_dia_search(start_mv, ms_params, step_param, 0, cost_list, | 
|  | best_mv); | 
|  | break; | 
|  | case FAST_HEX: | 
|  | var = fast_hex_search(start_mv, ms_params, step_param, 0, cost_list, | 
|  | best_mv); | 
|  | break; | 
|  | case HEX: | 
|  | var = hex_search(start_mv, ms_params, step_param, 1, cost_list, best_mv); | 
|  | break; | 
|  | case SQUARE: | 
|  | var = | 
|  | square_search(start_mv, ms_params, step_param, 1, cost_list, best_mv); | 
|  | break; | 
|  | case BIGDIA: | 
|  | var = | 
|  | bigdia_search(start_mv, ms_params, step_param, 1, cost_list, best_mv); | 
|  | break; | 
|  | case NSTEP: | 
|  | case NSTEP_8PT: | 
|  | case DIAMOND: | 
|  | case CLAMPED_DIAMOND: | 
|  | var = full_pixel_diamond(start_mv, ms_params, step_param, cost_list, | 
|  | best_mv, second_best_mv); | 
|  | break; | 
|  | default: assert(0 && "Invalid search method."); | 
|  | } | 
|  |  | 
|  | // Should we allow a follow on exhaustive search? | 
|  | if (!run_mesh_search && | 
|  | ((search_method == NSTEP) || (search_method == NSTEP_8PT))) { | 
|  | int exhaustive_thr = ms_params->force_mesh_thresh; | 
|  | exhaustive_thr >>= | 
|  | 10 - (mi_size_wide_log2[bsize] + mi_size_high_log2[bsize]); | 
|  | // Threshold variance for an exhaustive full search. | 
|  | if (var > exhaustive_thr) run_mesh_search = 1; | 
|  | } | 
|  |  | 
|  | // TODO(yunqing): the following is used to reduce mesh search in temporal | 
|  | // filtering. Can extend it to intrabc. | 
|  | if (!is_intra_mode && ms_params->prune_mesh_search) { | 
|  | const int full_pel_mv_diff = AOMMAX(abs(start_mv.row - best_mv->row), | 
|  | abs(start_mv.col - best_mv->col)); | 
|  | if (full_pel_mv_diff <= ms_params->mesh_search_mv_diff_threshold) { | 
|  | run_mesh_search = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ms_params->sdf != ms_params->vfp->sdf) { | 
|  | // If we are skipping rows when we perform the motion search, we need to | 
|  | // check the quality of skipping. If it's bad, then we run mesh search with | 
|  | // skip row features off. | 
|  | // TODO(chiyotsai@google.com): Handle the case where we have a vertical | 
|  | // offset of 1 before we hit this statement to avoid having to redo | 
|  | // motion search. | 
|  | const struct buf_2d *src = ms_params->ms_buffers.src; | 
|  | const struct buf_2d *ref = ms_params->ms_buffers.ref; | 
|  | const int src_stride = src->stride; | 
|  | const int ref_stride = ref->stride; | 
|  |  | 
|  | const uint8_t *src_address = src->buf; | 
|  | const uint8_t *best_address = get_buf_from_fullmv(ref, best_mv); | 
|  | const int sad = | 
|  | ms_params->vfp->sdf(src_address, src_stride, best_address, ref_stride); | 
|  | const int skip_sad = | 
|  | ms_params->vfp->sdsf(src_address, src_stride, best_address, ref_stride); | 
|  | // We will keep the result of skipping rows if it's good enough. Here, good | 
|  | // enough means the error is less than 1 per pixel. | 
|  | const int kSADThresh = | 
|  | 1 << (mi_size_wide_log2[bsize] + mi_size_high_log2[bsize]); | 
|  | if (sad > kSADThresh && abs(skip_sad - sad) * 10 >= AOMMAX(sad, 1) * 9) { | 
|  | // There is a large discrepancy between skipping and not skipping, so we | 
|  | // need to redo the motion search. | 
|  | FULLPEL_MOTION_SEARCH_PARAMS new_ms_params = *ms_params; | 
|  | new_ms_params.sdf = new_ms_params.vfp->sdf; | 
|  | new_ms_params.sdx4df = new_ms_params.vfp->sdx4df; | 
|  |  | 
|  | return av1_full_pixel_search(start_mv, &new_ms_params, step_param, | 
|  | cost_list, best_mv, second_best_mv); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (run_mesh_search) { | 
|  | int var_ex; | 
|  | FULLPEL_MV tmp_mv_ex; | 
|  | // Pick the mesh pattern for exhaustive search based on the toolset (intraBC | 
|  | // or non-intraBC) | 
|  | // TODO(chiyotsai@google.com):  There is a bug here where the second best mv | 
|  | // gets overwritten without actually comparing the rdcost. | 
|  | const MESH_PATTERN *const mesh_patterns = | 
|  | ms_params->mesh_patterns[is_intra_mode]; | 
|  | // TODO(chiyotsai@google.com): the second best mv is not set correctly by | 
|  | // full_pixel_exhaustive, which can incorrectly override it. | 
|  | var_ex = full_pixel_exhaustive(*best_mv, ms_params, mesh_patterns, | 
|  | cost_list, &tmp_mv_ex, second_best_mv); | 
|  | if (var_ex < var) { | 
|  | var = var_ex; | 
|  | *best_mv = tmp_mv_ex; | 
|  | } | 
|  | } | 
|  |  | 
|  | return var; | 
|  | } | 
|  |  | 
|  | int av1_intrabc_hash_search(const AV1_COMP *cpi, const MACROBLOCKD *xd, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | IntraBCHashInfo *intrabc_hash_info, | 
|  | FULLPEL_MV *best_mv) { | 
|  | if (!av1_use_hash_me(cpi)) return INT_MAX; | 
|  |  | 
|  | const BLOCK_SIZE bsize = ms_params->bsize; | 
|  | const int block_width = block_size_wide[bsize]; | 
|  | const int block_height = block_size_high[bsize]; | 
|  |  | 
|  | if (block_width != block_height) return INT_MAX; | 
|  |  | 
|  | const FullMvLimits *mv_limits = &ms_params->mv_limits; | 
|  | const MSBuffers *ms_buffer = &ms_params->ms_buffers; | 
|  |  | 
|  | const uint8_t *src = ms_buffer->src->buf; | 
|  | const int src_stride = ms_buffer->src->stride; | 
|  |  | 
|  | const int mi_row = xd->mi_row; | 
|  | const int mi_col = xd->mi_col; | 
|  | const int x_pos = mi_col * MI_SIZE; | 
|  | const int y_pos = mi_row * MI_SIZE; | 
|  |  | 
|  | uint32_t hash_value1, hash_value2; | 
|  | int best_hash_cost = INT_MAX; | 
|  |  | 
|  | // for the hashMap | 
|  | hash_table *ref_frame_hash = &intrabc_hash_info->intrabc_hash_table; | 
|  |  | 
|  | av1_get_block_hash_value(intrabc_hash_info, src, src_stride, block_width, | 
|  | &hash_value1, &hash_value2, is_cur_buf_hbd(xd)); | 
|  |  | 
|  | const int count = av1_hash_table_count(ref_frame_hash, hash_value1); | 
|  | if (count <= 1) { | 
|  | return INT_MAX; | 
|  | } | 
|  |  | 
|  | Iterator iterator = av1_hash_get_first_iterator(ref_frame_hash, hash_value1); | 
|  | for (int i = 0; i < count; i++, aom_iterator_increment(&iterator)) { | 
|  | block_hash ref_block_hash = *(block_hash *)(aom_iterator_get(&iterator)); | 
|  | if (hash_value2 == ref_block_hash.hash_value2) { | 
|  | // Make sure the prediction is from valid area. | 
|  | const MV dv = { GET_MV_SUBPEL(ref_block_hash.y - y_pos), | 
|  | GET_MV_SUBPEL(ref_block_hash.x - x_pos) }; | 
|  | if (!av1_is_dv_valid(dv, &cpi->common, xd, mi_row, mi_col, bsize, | 
|  | cpi->common.seq_params->mib_size_log2)) | 
|  | continue; | 
|  |  | 
|  | FULLPEL_MV hash_mv; | 
|  | hash_mv.col = ref_block_hash.x - x_pos; | 
|  | hash_mv.row = ref_block_hash.y - y_pos; | 
|  | if (!av1_is_fullmv_in_range(mv_limits, hash_mv)) continue; | 
|  | const int refCost = get_mvpred_var_cost(ms_params, &hash_mv); | 
|  | if (refCost < best_hash_cost) { | 
|  | best_hash_cost = refCost; | 
|  | *best_mv = hash_mv; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return best_hash_cost; | 
|  | } | 
|  |  | 
|  | static int vector_match(int16_t *ref, int16_t *src, int bwl) { | 
|  | int best_sad = INT_MAX; | 
|  | int this_sad; | 
|  | int d; | 
|  | int center, offset = 0; | 
|  | int bw = 4 << bwl;  // redundant variable, to be changed in the experiments. | 
|  | for (d = 0; d <= bw; d += 16) { | 
|  | this_sad = aom_vector_var(&ref[d], src, bwl); | 
|  | if (this_sad < best_sad) { | 
|  | best_sad = this_sad; | 
|  | offset = d; | 
|  | } | 
|  | } | 
|  | center = offset; | 
|  |  | 
|  | for (d = -8; d <= 8; d += 16) { | 
|  | int this_pos = offset + d; | 
|  | // check limit | 
|  | if (this_pos < 0 || this_pos > bw) continue; | 
|  | this_sad = aom_vector_var(&ref[this_pos], src, bwl); | 
|  | if (this_sad < best_sad) { | 
|  | best_sad = this_sad; | 
|  | center = this_pos; | 
|  | } | 
|  | } | 
|  | offset = center; | 
|  |  | 
|  | for (d = -4; d <= 4; d += 8) { | 
|  | int this_pos = offset + d; | 
|  | // check limit | 
|  | if (this_pos < 0 || this_pos > bw) continue; | 
|  | this_sad = aom_vector_var(&ref[this_pos], src, bwl); | 
|  | if (this_sad < best_sad) { | 
|  | best_sad = this_sad; | 
|  | center = this_pos; | 
|  | } | 
|  | } | 
|  | offset = center; | 
|  |  | 
|  | for (d = -2; d <= 2; d += 4) { | 
|  | int this_pos = offset + d; | 
|  | // check limit | 
|  | if (this_pos < 0 || this_pos > bw) continue; | 
|  | this_sad = aom_vector_var(&ref[this_pos], src, bwl); | 
|  | if (this_sad < best_sad) { | 
|  | best_sad = this_sad; | 
|  | center = this_pos; | 
|  | } | 
|  | } | 
|  | offset = center; | 
|  |  | 
|  | for (d = -1; d <= 1; d += 2) { | 
|  | int this_pos = offset + d; | 
|  | // check limit | 
|  | if (this_pos < 0 || this_pos > bw) continue; | 
|  | this_sad = aom_vector_var(&ref[this_pos], src, bwl); | 
|  | if (this_sad < best_sad) { | 
|  | best_sad = this_sad; | 
|  | center = this_pos; | 
|  | } | 
|  | } | 
|  |  | 
|  | return (center - (bw >> 1)); | 
|  | } | 
|  |  | 
|  | // A special fast version of motion search used in rt mode | 
|  | unsigned int av1_int_pro_motion_estimation(const AV1_COMP *cpi, MACROBLOCK *x, | 
|  | BLOCK_SIZE bsize, int mi_row, | 
|  | int mi_col, const MV *ref_mv) { | 
|  | MACROBLOCKD *xd = &x->e_mbd; | 
|  | MB_MODE_INFO *mi = xd->mi[0]; | 
|  | struct buf_2d backup_yv12[MAX_MB_PLANE] = { { 0, 0, 0, 0, 0 } }; | 
|  | DECLARE_ALIGNED(16, int16_t, hbuf[256]); | 
|  | DECLARE_ALIGNED(16, int16_t, vbuf[256]); | 
|  | DECLARE_ALIGNED(16, int16_t, src_hbuf[128]); | 
|  | DECLARE_ALIGNED(16, int16_t, src_vbuf[128]); | 
|  | int idx; | 
|  | const int bw = 4 << mi_size_wide_log2[bsize]; | 
|  | const int bh = 4 << mi_size_high_log2[bsize]; | 
|  | const int search_width = bw << 1; | 
|  | const int search_height = bh << 1; | 
|  | const int src_stride = x->plane[0].src.stride; | 
|  | const int ref_stride = xd->plane[0].pre[0].stride; | 
|  | uint8_t const *ref_buf, *src_buf; | 
|  | int_mv *best_int_mv = &xd->mi[0]->mv[0]; | 
|  | unsigned int best_sad, tmp_sad, this_sad[4]; | 
|  | const int norm_factor = 3 + (bw >> 5); | 
|  | const YV12_BUFFER_CONFIG *scaled_ref_frame = | 
|  | av1_get_scaled_ref_frame(cpi, mi->ref_frame[0]); | 
|  | static const MV search_pos[4] = { | 
|  | { -1, 0 }, | 
|  | { 0, -1 }, | 
|  | { 0, 1 }, | 
|  | { 1, 0 }, | 
|  | }; | 
|  |  | 
|  | if (scaled_ref_frame) { | 
|  | int i; | 
|  | // Swap out the reference frame for a version that's been scaled to | 
|  | // match the resolution of the current frame, allowing the existing | 
|  | // motion search code to be used without additional modifications. | 
|  | for (i = 0; i < MAX_MB_PLANE; i++) backup_yv12[i] = xd->plane[i].pre[0]; | 
|  | av1_setup_pre_planes(xd, 0, scaled_ref_frame, mi_row, mi_col, NULL, | 
|  | MAX_MB_PLANE); | 
|  | } | 
|  |  | 
|  | if (xd->bd != 8) { | 
|  | unsigned int sad; | 
|  | best_int_mv->as_fullmv = kZeroFullMv; | 
|  | sad = cpi->ppi->fn_ptr[bsize].sdf(x->plane[0].src.buf, src_stride, | 
|  | xd->plane[0].pre[0].buf, ref_stride); | 
|  |  | 
|  | if (scaled_ref_frame) { | 
|  | int i; | 
|  | for (i = 0; i < MAX_MB_PLANE; i++) xd->plane[i].pre[0] = backup_yv12[i]; | 
|  | } | 
|  | return sad; | 
|  | } | 
|  |  | 
|  | // Set up prediction 1-D reference set | 
|  | ref_buf = xd->plane[0].pre[0].buf - (bw >> 1); | 
|  | for (idx = 0; idx < search_width; idx += 16) { | 
|  | aom_int_pro_row(&hbuf[idx], ref_buf, ref_stride, bh); | 
|  | ref_buf += 16; | 
|  | } | 
|  |  | 
|  | ref_buf = xd->plane[0].pre[0].buf - (bh >> 1) * ref_stride; | 
|  | for (idx = 0; idx < search_height; ++idx) { | 
|  | vbuf[idx] = aom_int_pro_col(ref_buf, bw) >> norm_factor; | 
|  | ref_buf += ref_stride; | 
|  | } | 
|  |  | 
|  | // Set up src 1-D reference set | 
|  | for (idx = 0; idx < bw; idx += 16) { | 
|  | src_buf = x->plane[0].src.buf + idx; | 
|  | aom_int_pro_row(&src_hbuf[idx], src_buf, src_stride, bh); | 
|  | } | 
|  |  | 
|  | src_buf = x->plane[0].src.buf; | 
|  | for (idx = 0; idx < bh; ++idx) { | 
|  | src_vbuf[idx] = aom_int_pro_col(src_buf, bw) >> norm_factor; | 
|  | src_buf += src_stride; | 
|  | } | 
|  |  | 
|  | // Find the best match per 1-D search | 
|  | best_int_mv->as_fullmv.col = | 
|  | vector_match(hbuf, src_hbuf, mi_size_wide_log2[bsize]); | 
|  | best_int_mv->as_fullmv.row = | 
|  | vector_match(vbuf, src_vbuf, mi_size_high_log2[bsize]); | 
|  |  | 
|  | FULLPEL_MV this_mv = best_int_mv->as_fullmv; | 
|  | src_buf = x->plane[0].src.buf; | 
|  | ref_buf = get_buf_from_fullmv(&xd->plane[0].pre[0], &this_mv); | 
|  | best_sad = | 
|  | cpi->ppi->fn_ptr[bsize].sdf(src_buf, src_stride, ref_buf, ref_stride); | 
|  |  | 
|  | { | 
|  | const uint8_t *const pos[4] = { | 
|  | ref_buf - ref_stride, | 
|  | ref_buf - 1, | 
|  | ref_buf + 1, | 
|  | ref_buf + ref_stride, | 
|  | }; | 
|  |  | 
|  | cpi->ppi->fn_ptr[bsize].sdx4df(src_buf, src_stride, pos, ref_stride, | 
|  | this_sad); | 
|  | } | 
|  |  | 
|  | for (idx = 0; idx < 4; ++idx) { | 
|  | if (this_sad[idx] < best_sad) { | 
|  | best_sad = this_sad[idx]; | 
|  | best_int_mv->as_fullmv.row = search_pos[idx].row + this_mv.row; | 
|  | best_int_mv->as_fullmv.col = search_pos[idx].col + this_mv.col; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (this_sad[0] < this_sad[3]) | 
|  | this_mv.row -= 1; | 
|  | else | 
|  | this_mv.row += 1; | 
|  |  | 
|  | if (this_sad[1] < this_sad[2]) | 
|  | this_mv.col -= 1; | 
|  | else | 
|  | this_mv.col += 1; | 
|  |  | 
|  | ref_buf = get_buf_from_fullmv(&xd->plane[0].pre[0], &this_mv); | 
|  |  | 
|  | tmp_sad = | 
|  | cpi->ppi->fn_ptr[bsize].sdf(src_buf, src_stride, ref_buf, ref_stride); | 
|  | if (best_sad > tmp_sad) { | 
|  | best_int_mv->as_fullmv = this_mv; | 
|  | best_sad = tmp_sad; | 
|  | } | 
|  |  | 
|  | convert_fullmv_to_mv(best_int_mv); | 
|  |  | 
|  | SubpelMvLimits subpel_mv_limits; | 
|  | av1_set_subpel_mv_search_range(&subpel_mv_limits, &x->mv_limits, ref_mv); | 
|  | clamp_mv(&best_int_mv->as_mv, &subpel_mv_limits); | 
|  |  | 
|  | if (scaled_ref_frame) { | 
|  | int i; | 
|  | for (i = 0; i < MAX_MB_PLANE; i++) xd->plane[i].pre[0] = backup_yv12[i]; | 
|  | } | 
|  |  | 
|  | return best_sad; | 
|  | } | 
|  |  | 
|  | // ============================================================================= | 
|  | //  Fullpixel Motion Search: OBMC | 
|  | // ============================================================================= | 
|  | static INLINE int get_obmc_mvpred_var( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV *this_mv) { | 
|  | const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const MSBuffers *ms_buffers = &ms_params->ms_buffers; | 
|  | const int32_t *wsrc = ms_buffers->wsrc; | 
|  | const int32_t *mask = ms_buffers->obmc_mask; | 
|  | const struct buf_2d *ref_buf = ms_buffers->ref; | 
|  |  | 
|  | const MV mv = get_mv_from_fullmv(this_mv); | 
|  | unsigned int unused; | 
|  |  | 
|  | return vfp->ovf(get_buf_from_fullmv(ref_buf, this_mv), ref_buf->stride, wsrc, | 
|  | mask, &unused) + | 
|  | mv_err_cost_(&mv, mv_cost_params); | 
|  | } | 
|  |  | 
|  | static int obmc_refining_search_sad( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, FULLPEL_MV *best_mv) { | 
|  | const aom_variance_fn_ptr_t *fn_ptr = ms_params->vfp; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const MSBuffers *ms_buffers = &ms_params->ms_buffers; | 
|  | const int32_t *wsrc = ms_buffers->wsrc; | 
|  | const int32_t *mask = ms_buffers->obmc_mask; | 
|  | const struct buf_2d *ref_buf = ms_buffers->ref; | 
|  | const FULLPEL_MV neighbors[4] = { { -1, 0 }, { 0, -1 }, { 0, 1 }, { 1, 0 } }; | 
|  | const int kSearchRange = 8; | 
|  |  | 
|  | unsigned int best_sad = fn_ptr->osdf(get_buf_from_fullmv(ref_buf, best_mv), | 
|  | ref_buf->stride, wsrc, mask) + | 
|  | mvsad_err_cost_(best_mv, mv_cost_params); | 
|  |  | 
|  | for (int i = 0; i < kSearchRange; i++) { | 
|  | int best_site = -1; | 
|  |  | 
|  | for (int j = 0; j < 4; j++) { | 
|  | const FULLPEL_MV mv = { best_mv->row + neighbors[j].row, | 
|  | best_mv->col + neighbors[j].col }; | 
|  | if (av1_is_fullmv_in_range(&ms_params->mv_limits, mv)) { | 
|  | unsigned int sad = fn_ptr->osdf(get_buf_from_fullmv(ref_buf, &mv), | 
|  | ref_buf->stride, wsrc, mask); | 
|  | if (sad < best_sad) { | 
|  | sad += mvsad_err_cost_(&mv, mv_cost_params); | 
|  |  | 
|  | if (sad < best_sad) { | 
|  | best_sad = sad; | 
|  | best_site = j; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site == -1) { | 
|  | break; | 
|  | } else { | 
|  | best_mv->row += neighbors[best_site].row; | 
|  | best_mv->col += neighbors[best_site].col; | 
|  | } | 
|  | } | 
|  | return best_sad; | 
|  | } | 
|  |  | 
|  | static int obmc_diamond_search_sad( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, FULLPEL_MV start_mv, | 
|  | FULLPEL_MV *best_mv, int search_step, int *num00) { | 
|  | const aom_variance_fn_ptr_t *fn_ptr = ms_params->vfp; | 
|  | const search_site_config *cfg = ms_params->search_sites; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const MSBuffers *ms_buffers = &ms_params->ms_buffers; | 
|  | const int32_t *wsrc = ms_buffers->wsrc; | 
|  | const int32_t *mask = ms_buffers->obmc_mask; | 
|  | const struct buf_2d *const ref_buf = ms_buffers->ref; | 
|  |  | 
|  | // search_step determines the length of the initial step and hence the number | 
|  | // of iterations. | 
|  | const int tot_steps = cfg->num_search_steps - search_step; | 
|  | const uint8_t *best_address, *init_ref; | 
|  | int best_sad = INT_MAX; | 
|  | int best_site = 0; | 
|  |  | 
|  | clamp_fullmv(&start_mv, &ms_params->mv_limits); | 
|  | best_address = init_ref = get_buf_from_fullmv(ref_buf, &start_mv); | 
|  | *num00 = 0; | 
|  | *best_mv = start_mv; | 
|  |  | 
|  | // Check the starting position | 
|  | best_sad = fn_ptr->osdf(best_address, ref_buf->stride, wsrc, mask) + | 
|  | mvsad_err_cost_(best_mv, mv_cost_params); | 
|  |  | 
|  | for (int step = tot_steps - 1; step >= 0; --step) { | 
|  | const search_site *const site = cfg->site[step]; | 
|  | best_site = 0; | 
|  | for (int idx = 1; idx <= cfg->searches_per_step[step]; ++idx) { | 
|  | const FULLPEL_MV mv = { best_mv->row + site[idx].mv.row, | 
|  | best_mv->col + site[idx].mv.col }; | 
|  | if (av1_is_fullmv_in_range(&ms_params->mv_limits, mv)) { | 
|  | int sad = fn_ptr->osdf(best_address + site[idx].offset, ref_buf->stride, | 
|  | wsrc, mask); | 
|  | if (sad < best_sad) { | 
|  | sad += mvsad_err_cost_(&mv, mv_cost_params); | 
|  |  | 
|  | if (sad < best_sad) { | 
|  | best_sad = sad; | 
|  | best_site = idx; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_site != 0) { | 
|  | best_mv->row += site[best_site].mv.row; | 
|  | best_mv->col += site[best_site].mv.col; | 
|  | best_address += site[best_site].offset; | 
|  | } else if (best_address == init_ref) { | 
|  | (*num00)++; | 
|  | } | 
|  | } | 
|  | return best_sad; | 
|  | } | 
|  |  | 
|  | static int obmc_full_pixel_diamond( | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV start_mv, | 
|  | int step_param, FULLPEL_MV *best_mv) { | 
|  | const search_site_config *cfg = ms_params->search_sites; | 
|  | FULLPEL_MV tmp_mv; | 
|  | int thissme, n, num00 = 0; | 
|  | int bestsme = | 
|  | obmc_diamond_search_sad(ms_params, start_mv, &tmp_mv, step_param, &n); | 
|  | if (bestsme < INT_MAX) bestsme = get_obmc_mvpred_var(ms_params, &tmp_mv); | 
|  | *best_mv = tmp_mv; | 
|  |  | 
|  | // If there won't be more n-step search, check to see if refining search is | 
|  | // needed. | 
|  | const int further_steps = cfg->num_search_steps - 1 - step_param; | 
|  |  | 
|  | while (n < further_steps) { | 
|  | ++n; | 
|  |  | 
|  | if (num00) { | 
|  | num00--; | 
|  | } else { | 
|  | thissme = obmc_diamond_search_sad(ms_params, start_mv, &tmp_mv, | 
|  | step_param + n, &num00); | 
|  | if (thissme < INT_MAX) thissme = get_obmc_mvpred_var(ms_params, &tmp_mv); | 
|  |  | 
|  | if (thissme < bestsme) { | 
|  | bestsme = thissme; | 
|  | *best_mv = tmp_mv; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return bestsme; | 
|  | } | 
|  |  | 
|  | int av1_obmc_full_pixel_search(const FULLPEL_MV start_mv, | 
|  | const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | const int step_param, FULLPEL_MV *best_mv) { | 
|  | if (!ms_params->fast_obmc_search) { | 
|  | const int bestsme = | 
|  | obmc_full_pixel_diamond(ms_params, start_mv, step_param, best_mv); | 
|  | return bestsme; | 
|  | } else { | 
|  | *best_mv = start_mv; | 
|  | clamp_fullmv(best_mv, &ms_params->mv_limits); | 
|  | int thissme = obmc_refining_search_sad(ms_params, best_mv); | 
|  | if (thissme < INT_MAX) thissme = get_obmc_mvpred_var(ms_params, best_mv); | 
|  | return thissme; | 
|  | } | 
|  | } | 
|  |  | 
|  | // ============================================================================= | 
|  | //  Subpixel Motion Search: Translational | 
|  | // ============================================================================= | 
|  | #define INIT_SUBPEL_STEP_SIZE (4) | 
|  | /* | 
|  | * To avoid the penalty for crossing cache-line read, preload the reference | 
|  | * area in a small buffer, which is aligned to make sure there won't be crossing | 
|  | * cache-line read while reading from this buffer. This reduced the cpu | 
|  | * cycles spent on reading ref data in sub-pixel filter functions. | 
|  | * TODO: Currently, since sub-pixel search range here is -3 ~ 3, copy 22 rows x | 
|  | * 32 cols area that is enough for 16x16 macroblock. Later, for SPLITMV, we | 
|  | * could reduce the area. | 
|  | */ | 
|  |  | 
|  | // Returns the subpel offset used by various subpel variance functions [m]sv[a]f | 
|  | static INLINE int get_subpel_part(int x) { return x & 7; } | 
|  |  | 
|  | // Gets the address of the ref buffer at subpel location (r, c), rounded to the | 
|  | // nearest fullpel precision toward - \infty | 
|  | static INLINE const uint8_t *get_buf_from_mv(const struct buf_2d *buf, | 
|  | const MV mv) { | 
|  | const int offset = (mv.row >> 3) * buf->stride + (mv.col >> 3); | 
|  | return &buf->buf[offset]; | 
|  | } | 
|  |  | 
|  | // Estimates the variance of prediction residue using bilinear filter for fast | 
|  | // search. | 
|  | static INLINE int estimated_pref_error( | 
|  | const MV *this_mv, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | unsigned int *sse) { | 
|  | const aom_variance_fn_ptr_t *vfp = var_params->vfp; | 
|  |  | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  | const uint8_t *src = ms_buffers->src->buf; | 
|  | const uint8_t *ref = get_buf_from_mv(ms_buffers->ref, *this_mv); | 
|  | const int src_stride = ms_buffers->src->stride; | 
|  | const int ref_stride = ms_buffers->ref->stride; | 
|  | const uint8_t *second_pred = ms_buffers->second_pred; | 
|  | const uint8_t *mask = ms_buffers->mask; | 
|  | const int mask_stride = ms_buffers->mask_stride; | 
|  | const int invert_mask = ms_buffers->inv_mask; | 
|  |  | 
|  | const int subpel_x_q3 = get_subpel_part(this_mv->col); | 
|  | const int subpel_y_q3 = get_subpel_part(this_mv->row); | 
|  |  | 
|  | if (second_pred == NULL) { | 
|  | return vfp->svf(ref, ref_stride, subpel_x_q3, subpel_y_q3, src, src_stride, | 
|  | sse); | 
|  | } else if (mask) { | 
|  | return vfp->msvf(ref, ref_stride, subpel_x_q3, subpel_y_q3, src, src_stride, | 
|  | second_pred, mask, mask_stride, invert_mask, sse); | 
|  | } else { | 
|  | return vfp->svaf(ref, ref_stride, subpel_x_q3, subpel_y_q3, src, src_stride, | 
|  | sse, second_pred); | 
|  | } | 
|  | } | 
|  |  | 
|  | // Calculates the variance of prediction residue. | 
|  | static int upsampled_pref_error(MACROBLOCKD *xd, const AV1_COMMON *cm, | 
|  | const MV *this_mv, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | unsigned int *sse) { | 
|  | const aom_variance_fn_ptr_t *vfp = var_params->vfp; | 
|  | const SUBPEL_SEARCH_TYPE subpel_search_type = var_params->subpel_search_type; | 
|  |  | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  | const uint8_t *src = ms_buffers->src->buf; | 
|  | const uint8_t *ref = get_buf_from_mv(ms_buffers->ref, *this_mv); | 
|  | const int src_stride = ms_buffers->src->stride; | 
|  | const int ref_stride = ms_buffers->ref->stride; | 
|  | const uint8_t *second_pred = ms_buffers->second_pred; | 
|  | const uint8_t *mask = ms_buffers->mask; | 
|  | const int mask_stride = ms_buffers->mask_stride; | 
|  | const int invert_mask = ms_buffers->inv_mask; | 
|  | const int w = var_params->w; | 
|  | const int h = var_params->h; | 
|  |  | 
|  | const int mi_row = xd->mi_row; | 
|  | const int mi_col = xd->mi_col; | 
|  | const int subpel_x_q3 = get_subpel_part(this_mv->col); | 
|  | const int subpel_y_q3 = get_subpel_part(this_mv->row); | 
|  |  | 
|  | unsigned int besterr; | 
|  | #if CONFIG_AV1_HIGHBITDEPTH | 
|  | if (is_cur_buf_hbd(xd)) { | 
|  | DECLARE_ALIGNED(16, uint16_t, pred16[MAX_SB_SQUARE]); | 
|  | uint8_t *pred8 = CONVERT_TO_BYTEPTR(pred16); | 
|  | if (second_pred != NULL) { | 
|  | if (mask) { | 
|  | aom_highbd_comp_mask_upsampled_pred( | 
|  | xd, cm, mi_row, mi_col, this_mv, pred8, second_pred, w, h, | 
|  | subpel_x_q3, subpel_y_q3, ref, ref_stride, mask, mask_stride, | 
|  | invert_mask, xd->bd, subpel_search_type); | 
|  | } else { | 
|  | aom_highbd_comp_avg_upsampled_pred( | 
|  | xd, cm, mi_row, mi_col, this_mv, pred8, second_pred, w, h, | 
|  | subpel_x_q3, subpel_y_q3, ref, ref_stride, xd->bd, | 
|  | subpel_search_type); | 
|  | } | 
|  | } else { | 
|  | aom_highbd_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred8, w, h, | 
|  | subpel_x_q3, subpel_y_q3, ref, ref_stride, | 
|  | xd->bd, subpel_search_type); | 
|  | } | 
|  | besterr = vfp->vf(pred8, w, src, src_stride, sse); | 
|  | } else { | 
|  | DECLARE_ALIGNED(16, uint8_t, pred[MAX_SB_SQUARE]); | 
|  | if (second_pred != NULL) { | 
|  | if (mask) { | 
|  | aom_comp_mask_upsampled_pred( | 
|  | xd, cm, mi_row, mi_col, this_mv, pred, second_pred, w, h, | 
|  | subpel_x_q3, subpel_y_q3, ref, ref_stride, mask, mask_stride, | 
|  | invert_mask, subpel_search_type); | 
|  | } else { | 
|  | aom_comp_avg_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, | 
|  | second_pred, w, h, subpel_x_q3, subpel_y_q3, | 
|  | ref, ref_stride, subpel_search_type); | 
|  | } | 
|  | } else { | 
|  | aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, | 
|  | subpel_x_q3, subpel_y_q3, ref, ref_stride, | 
|  | subpel_search_type); | 
|  | } | 
|  |  | 
|  | besterr = vfp->vf(pred, w, src, src_stride, sse); | 
|  | } | 
|  | #else | 
|  | DECLARE_ALIGNED(16, uint8_t, pred[MAX_SB_SQUARE]); | 
|  | if (second_pred != NULL) { | 
|  | if (mask) { | 
|  | aom_comp_mask_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, | 
|  | second_pred, w, h, subpel_x_q3, subpel_y_q3, | 
|  | ref, ref_stride, mask, mask_stride, | 
|  | invert_mask, subpel_search_type); | 
|  | } else { | 
|  | aom_comp_avg_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, | 
|  | second_pred, w, h, subpel_x_q3, subpel_y_q3, | 
|  | ref, ref_stride, subpel_search_type); | 
|  | } | 
|  | } else { | 
|  | aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, subpel_x_q3, | 
|  | subpel_y_q3, ref, ref_stride, subpel_search_type); | 
|  | } | 
|  |  | 
|  | besterr = vfp->vf(pred, w, src, src_stride, sse); | 
|  | #endif | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | // Estimates whether this_mv is better than best_mv. This function incorporates | 
|  | // both prediction error and residue into account. It is suffixed "fast" because | 
|  | // it uses bilinear filter to estimate the prediction. | 
|  | static INLINE unsigned int check_better_fast( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV *this_mv, MV *best_mv, | 
|  | const SubpelMvLimits *mv_limits, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int *has_better_mv, int is_scaled) { | 
|  | unsigned int cost; | 
|  | if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | 
|  | unsigned int sse; | 
|  | int thismse; | 
|  | if (is_scaled) { | 
|  | thismse = upsampled_pref_error(xd, cm, this_mv, var_params, &sse); | 
|  | } else { | 
|  | thismse = estimated_pref_error(this_mv, var_params, &sse); | 
|  | } | 
|  | cost = mv_err_cost_(this_mv, mv_cost_params); | 
|  | cost += thismse; | 
|  |  | 
|  | if (cost < *besterr) { | 
|  | *besterr = cost; | 
|  | *best_mv = *this_mv; | 
|  | *distortion = thismse; | 
|  | *sse1 = sse; | 
|  | *has_better_mv |= 1; | 
|  | } | 
|  | } else { | 
|  | cost = INT_MAX; | 
|  | } | 
|  | return cost; | 
|  | } | 
|  |  | 
|  | // Checks whether this_mv is better than best_mv. This function incorporates | 
|  | // both prediction error and residue into account. | 
|  | static AOM_FORCE_INLINE unsigned int check_better( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV *this_mv, MV *best_mv, | 
|  | const SubpelMvLimits *mv_limits, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int *is_better) { | 
|  | unsigned int cost; | 
|  | if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | 
|  | unsigned int sse; | 
|  | int thismse; | 
|  | thismse = upsampled_pref_error(xd, cm, this_mv, var_params, &sse); | 
|  | cost = mv_err_cost_(this_mv, mv_cost_params); | 
|  | cost += thismse; | 
|  | if (cost < *besterr) { | 
|  | *besterr = cost; | 
|  | *best_mv = *this_mv; | 
|  | *distortion = thismse; | 
|  | *sse1 = sse; | 
|  | *is_better |= 1; | 
|  | } | 
|  | } else { | 
|  | cost = INT_MAX; | 
|  | } | 
|  | return cost; | 
|  | } | 
|  |  | 
|  | static INLINE MV get_best_diag_step(int step_size, unsigned int left_cost, | 
|  | unsigned int right_cost, | 
|  | unsigned int up_cost, | 
|  | unsigned int down_cost) { | 
|  | const MV diag_step = { up_cost <= down_cost ? -step_size : step_size, | 
|  | left_cost <= right_cost ? -step_size : step_size }; | 
|  |  | 
|  | return diag_step; | 
|  | } | 
|  |  | 
|  | // Searches the four cardinal direction for a better mv, then follows up with a | 
|  | // search in the best quadrant. This uses bilinear filter to speed up the | 
|  | // calculation. | 
|  | static AOM_FORCE_INLINE MV first_level_check_fast( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV this_mv, MV *best_mv, | 
|  | int hstep, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int is_scaled) { | 
|  | // Check the four cardinal directions | 
|  | const MV left_mv = { this_mv.row, this_mv.col - hstep }; | 
|  | int dummy = 0; | 
|  | const unsigned int left = check_better_fast( | 
|  | xd, cm, &left_mv, best_mv, mv_limits, var_params, mv_cost_params, besterr, | 
|  | sse1, distortion, &dummy, is_scaled); | 
|  |  | 
|  | const MV right_mv = { this_mv.row, this_mv.col + hstep }; | 
|  | const unsigned int right = check_better_fast( | 
|  | xd, cm, &right_mv, best_mv, mv_limits, var_params, mv_cost_params, | 
|  | besterr, sse1, distortion, &dummy, is_scaled); | 
|  |  | 
|  | const MV top_mv = { this_mv.row - hstep, this_mv.col }; | 
|  | const unsigned int up = check_better_fast( | 
|  | xd, cm, &top_mv, best_mv, mv_limits, var_params, mv_cost_params, besterr, | 
|  | sse1, distortion, &dummy, is_scaled); | 
|  |  | 
|  | const MV bottom_mv = { this_mv.row + hstep, this_mv.col }; | 
|  | const unsigned int down = check_better_fast( | 
|  | xd, cm, &bottom_mv, best_mv, mv_limits, var_params, mv_cost_params, | 
|  | besterr, sse1, distortion, &dummy, is_scaled); | 
|  |  | 
|  | const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | 
|  | const MV diag_mv = { this_mv.row + diag_step.row, | 
|  | this_mv.col + diag_step.col }; | 
|  |  | 
|  | // Check the diagonal direction with the best mv | 
|  | check_better_fast(xd, cm, &diag_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  |  | 
|  | return diag_step; | 
|  | } | 
|  |  | 
|  | // Performs a following up search after first_level_check_fast is called. This | 
|  | // performs two extra chess pattern searches in the best quadrant. | 
|  | static AOM_FORCE_INLINE void second_level_check_fast( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV this_mv, const MV diag_step, | 
|  | MV *best_mv, int hstep, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int is_scaled) { | 
|  | assert(diag_step.row == hstep || diag_step.row == -hstep); | 
|  | assert(diag_step.col == hstep || diag_step.col == -hstep); | 
|  | const int tr = this_mv.row; | 
|  | const int tc = this_mv.col; | 
|  | const int br = best_mv->row; | 
|  | const int bc = best_mv->col; | 
|  | int dummy = 0; | 
|  | if (tr != br && tc != bc) { | 
|  | assert(diag_step.col == bc - tc); | 
|  | assert(diag_step.row == br - tr); | 
|  | const MV chess_mv_1 = { br, bc + diag_step.col }; | 
|  | const MV chess_mv_2 = { br + diag_step.row, bc }; | 
|  | check_better_fast(xd, cm, &chess_mv_1, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  |  | 
|  | check_better_fast(xd, cm, &chess_mv_2, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | } else if (tr == br && tc != bc) { | 
|  | assert(diag_step.col == bc - tc); | 
|  | // Continue searching in the best direction | 
|  | const MV bottom_long_mv = { br + hstep, bc + diag_step.col }; | 
|  | const MV top_long_mv = { br - hstep, bc + diag_step.col }; | 
|  | check_better_fast(xd, cm, &bottom_long_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &top_long_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  |  | 
|  | // Search in the direction opposite of the best quadrant | 
|  | const MV rev_mv = { br - diag_step.row, bc }; | 
|  | check_better_fast(xd, cm, &rev_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | } else if (tr != br && tc == bc) { | 
|  | assert(diag_step.row == br - tr); | 
|  | // Continue searching in the best direction | 
|  | const MV right_long_mv = { br + diag_step.row, bc + hstep }; | 
|  | const MV left_long_mv = { br + diag_step.row, bc - hstep }; | 
|  | check_better_fast(xd, cm, &right_long_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &left_long_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  |  | 
|  | // Search in the direction opposite of the best quadrant | 
|  | const MV rev_mv = { br, bc - diag_step.col }; | 
|  | check_better_fast(xd, cm, &rev_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | } | 
|  | } | 
|  |  | 
|  | // Combines first level check and second level check when applicable. This first | 
|  | // searches the four cardinal directions, and perform several | 
|  | // diagonal/chess-pattern searches in the best quadrant. | 
|  | static AOM_FORCE_INLINE void two_level_checks_fast( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV this_mv, MV *best_mv, | 
|  | int hstep, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int iters, int is_scaled) { | 
|  | const MV diag_step = first_level_check_fast( | 
|  | xd, cm, this_mv, best_mv, hstep, mv_limits, var_params, mv_cost_params, | 
|  | besterr, sse1, distortion, is_scaled); | 
|  | if (iters > 1) { | 
|  | second_level_check_fast(xd, cm, this_mv, diag_step, best_mv, hstep, | 
|  | mv_limits, var_params, mv_cost_params, besterr, | 
|  | sse1, distortion, is_scaled); | 
|  | } | 
|  | } | 
|  |  | 
|  | static AOM_FORCE_INLINE MV | 
|  | first_level_check(MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, | 
|  | MV *best_mv, const int hstep, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion) { | 
|  | int dummy = 0; | 
|  | const MV left_mv = { this_mv.row, this_mv.col - hstep }; | 
|  | const MV right_mv = { this_mv.row, this_mv.col + hstep }; | 
|  | const MV top_mv = { this_mv.row - hstep, this_mv.col }; | 
|  | const MV bottom_mv = { this_mv.row + hstep, this_mv.col }; | 
|  |  | 
|  | const unsigned int left = | 
|  | check_better(xd, cm, &left_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  | const unsigned int right = | 
|  | check_better(xd, cm, &right_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  | const unsigned int up = | 
|  | check_better(xd, cm, &top_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  | const unsigned int down = | 
|  | check_better(xd, cm, &bottom_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  |  | 
|  | const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | 
|  | const MV diag_mv = { this_mv.row + diag_step.row, | 
|  | this_mv.col + diag_step.col }; | 
|  |  | 
|  | // Check the diagonal direction with the best mv | 
|  | check_better(xd, cm, &diag_mv, best_mv, mv_limits, var_params, mv_cost_params, | 
|  | besterr, sse1, distortion, &dummy); | 
|  |  | 
|  | return diag_step; | 
|  | } | 
|  |  | 
|  | // A newer version of second level check that gives better quality. | 
|  | // TODO(chiyotsai@google.com): evaluate this on subpel_search_types different | 
|  | // from av1_find_best_sub_pixel_tree | 
|  | static AOM_FORCE_INLINE void second_level_check_v2( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV diag_step, | 
|  | MV *best_mv, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int is_scaled) { | 
|  | assert(best_mv->row == this_mv.row + diag_step.row || | 
|  | best_mv->col == this_mv.col + diag_step.col); | 
|  | if (CHECK_MV_EQUAL(this_mv, *best_mv)) { | 
|  | return; | 
|  | } else if (this_mv.row == best_mv->row) { | 
|  | // Search away from diagonal step since diagonal search did not provide any | 
|  | // improvement | 
|  | diag_step.row *= -1; | 
|  | } else if (this_mv.col == best_mv->col) { | 
|  | diag_step.col *= -1; | 
|  | } | 
|  |  | 
|  | const MV row_bias_mv = { best_mv->row + diag_step.row, best_mv->col }; | 
|  | const MV col_bias_mv = { best_mv->row, best_mv->col + diag_step.col }; | 
|  | const MV diag_bias_mv = { best_mv->row + diag_step.row, | 
|  | best_mv->col + diag_step.col }; | 
|  | int has_better_mv = 0; | 
|  |  | 
|  | if (var_params->subpel_search_type != USE_2_TAPS_ORIG) { | 
|  | check_better(xd, cm, &row_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &has_better_mv); | 
|  | check_better(xd, cm, &col_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &has_better_mv); | 
|  |  | 
|  | // Do an additional search if the second iteration gives a better mv | 
|  | if (has_better_mv) { | 
|  | check_better(xd, cm, &diag_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &has_better_mv); | 
|  | } | 
|  | } else { | 
|  | check_better_fast(xd, cm, &row_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &has_better_mv, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &col_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &has_better_mv, | 
|  | is_scaled); | 
|  |  | 
|  | // Do an additional search if the second iteration gives a better mv | 
|  | if (has_better_mv) { | 
|  | check_better_fast(xd, cm, &diag_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv, is_scaled); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | // Gets the error at the beginning when the mv has fullpel precision | 
|  | static unsigned int setup_center_error( | 
|  | const MACROBLOCKD *xd, const MV *bestmv, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | 
|  | const aom_variance_fn_ptr_t *vfp = var_params->vfp; | 
|  | const int w = var_params->w; | 
|  | const int h = var_params->h; | 
|  |  | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  | const uint8_t *src = ms_buffers->src->buf; | 
|  | const uint8_t *y = get_buf_from_mv(ms_buffers->ref, *bestmv); | 
|  | const int src_stride = ms_buffers->src->stride; | 
|  | const int y_stride = ms_buffers->ref->stride; | 
|  | const uint8_t *second_pred = ms_buffers->second_pred; | 
|  | const uint8_t *mask = ms_buffers->mask; | 
|  | const int mask_stride = ms_buffers->mask_stride; | 
|  | const int invert_mask = ms_buffers->inv_mask; | 
|  |  | 
|  | unsigned int besterr; | 
|  |  | 
|  | if (second_pred != NULL) { | 
|  | #if CONFIG_AV1_HIGHBITDEPTH | 
|  | if (is_cur_buf_hbd(xd)) { | 
|  | DECLARE_ALIGNED(16, uint16_t, comp_pred16[MAX_SB_SQUARE]); | 
|  | uint8_t *comp_pred = CONVERT_TO_BYTEPTR(comp_pred16); | 
|  | if (mask) { | 
|  | aom_highbd_comp_mask_pred(comp_pred, second_pred, w, h, y, y_stride, | 
|  | mask, mask_stride, invert_mask); | 
|  | } else { | 
|  | aom_highbd_comp_avg_pred(comp_pred, second_pred, w, h, y, y_stride); | 
|  | } | 
|  | besterr = vfp->vf(comp_pred, w, src, src_stride, sse1); | 
|  | } else { | 
|  | DECLARE_ALIGNED(16, uint8_t, comp_pred[MAX_SB_SQUARE]); | 
|  | if (mask) { | 
|  | aom_comp_mask_pred(comp_pred, second_pred, w, h, y, y_stride, mask, | 
|  | mask_stride, invert_mask); | 
|  | } else { | 
|  | aom_comp_avg_pred(comp_pred, second_pred, w, h, y, y_stride); | 
|  | } | 
|  | besterr = vfp->vf(comp_pred, w, src, src_stride, sse1); | 
|  | } | 
|  | #else | 
|  | (void)xd; | 
|  | DECLARE_ALIGNED(16, uint8_t, comp_pred[MAX_SB_SQUARE]); | 
|  | if (mask) { | 
|  | aom_comp_mask_pred(comp_pred, second_pred, w, h, y, y_stride, mask, | 
|  | mask_stride, invert_mask); | 
|  | } else { | 
|  | aom_comp_avg_pred(comp_pred, second_pred, w, h, y, y_stride); | 
|  | } | 
|  | besterr = vfp->vf(comp_pred, w, src, src_stride, sse1); | 
|  | #endif | 
|  | } else { | 
|  | besterr = vfp->vf(y, y_stride, src, src_stride, sse1); | 
|  | } | 
|  | *distortion = besterr; | 
|  | besterr += mv_err_cost_(bestmv, mv_cost_params); | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | // Gets the error at the beginning when the mv has fullpel precision | 
|  | static unsigned int upsampled_setup_center_error( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV *bestmv, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | 
|  | unsigned int besterr = upsampled_pref_error(xd, cm, bestmv, var_params, sse1); | 
|  | *distortion = besterr; | 
|  | besterr += mv_err_cost_(bestmv, mv_cost_params); | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | static INLINE int divide_and_round(int n, int d) { | 
|  | return ((n < 0) ^ (d < 0)) ? ((n - d / 2) / d) : ((n + d / 2) / d); | 
|  | } | 
|  |  | 
|  | static INLINE int is_cost_list_wellbehaved(const int *cost_list) { | 
|  | return cost_list[0] < cost_list[1] && cost_list[0] < cost_list[2] && | 
|  | cost_list[0] < cost_list[3] && cost_list[0] < cost_list[4]; | 
|  | } | 
|  |  | 
|  | // Returns surface minima estimate at given precision in 1/2^n bits. | 
|  | // Assume a model for the cost surface: S = A(x - x0)^2 + B(y - y0)^2 + C | 
|  | // For a given set of costs S0, S1, S2, S3, S4 at points | 
|  | // (y, x) = (0, 0), (0, -1), (1, 0), (0, 1) and (-1, 0) respectively, | 
|  | // the solution for the location of the minima (x0, y0) is given by: | 
|  | // x0 = 1/2 (S1 - S3)/(S1 + S3 - 2*S0), | 
|  | // y0 = 1/2 (S4 - S2)/(S4 + S2 - 2*S0). | 
|  | // The code below is an integerized version of that. | 
|  | static AOM_INLINE void get_cost_surf_min(const int *cost_list, int *ir, int *ic, | 
|  | int bits) { | 
|  | *ic = divide_and_round((cost_list[1] - cost_list[3]) * (1 << (bits - 1)), | 
|  | (cost_list[1] - 2 * cost_list[0] + cost_list[3])); | 
|  | *ir = divide_and_round((cost_list[4] - cost_list[2]) * (1 << (bits - 1)), | 
|  | (cost_list[4] - 2 * cost_list[0] + cost_list[2])); | 
|  | } | 
|  |  | 
|  | // Checks the list of mvs searched in the last iteration and see if we are | 
|  | // repeating it. If so, return 1. Otherwise we update the last_mv_search_list | 
|  | // with current_mv and return 0. | 
|  | static INLINE int check_repeated_mv_and_update(int_mv *last_mv_search_list, | 
|  | const MV current_mv, int iter) { | 
|  | if (last_mv_search_list) { | 
|  | if (CHECK_MV_EQUAL(last_mv_search_list[iter].as_mv, current_mv)) { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | last_mv_search_list[iter].as_mv = current_mv; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static AOM_INLINE int setup_center_error_facade( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV *bestmv, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion, | 
|  | int is_scaled) { | 
|  | if (is_scaled) { | 
|  | return upsampled_setup_center_error(xd, cm, bestmv, var_params, | 
|  | mv_cost_params, sse1, distortion); | 
|  | } else { | 
|  | return setup_center_error(xd, bestmv, var_params, mv_cost_params, sse1, | 
|  | distortion); | 
|  | } | 
|  | } | 
|  |  | 
|  | int av1_find_best_sub_pixel_tree_pruned_more( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, MV start_mv, MV *bestmv, | 
|  | int *distortion, unsigned int *sse1, int_mv *last_mv_search_list) { | 
|  | (void)cm; | 
|  | const int allow_hp = ms_params->allow_hp; | 
|  | const int forced_stop = ms_params->forced_stop; | 
|  | const int iters_per_step = ms_params->iters_per_step; | 
|  | const int *cost_list = ms_params->cost_list; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | 
|  |  | 
|  | // The iteration we are current searching for. Iter 0 corresponds to fullpel | 
|  | // mv, iter 1 to half pel, and so on | 
|  | int iter = 0; | 
|  | int hstep = INIT_SUBPEL_STEP_SIZE;  // Step size, initialized to 4/8=1/2 pel | 
|  | unsigned int besterr = INT_MAX; | 
|  | *bestmv = start_mv; | 
|  |  | 
|  | const struct scale_factors *const sf = is_intrabc_block(xd->mi[0]) | 
|  | ? &cm->sf_identity | 
|  | : xd->block_ref_scale_factors[0]; | 
|  | const int is_scaled = av1_is_scaled(sf); | 
|  | besterr = setup_center_error_facade( | 
|  | xd, cm, bestmv, var_params, mv_cost_params, sse1, distortion, is_scaled); | 
|  |  | 
|  | // If forced_stop is FULL_PEL, return. | 
|  | if (forced_stop == FULL_PEL) return besterr; | 
|  |  | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, *bestmv, iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  | iter++; | 
|  |  | 
|  | if (cost_list && cost_list[0] != INT_MAX && cost_list[1] != INT_MAX && | 
|  | cost_list[2] != INT_MAX && cost_list[3] != INT_MAX && | 
|  | cost_list[4] != INT_MAX && is_cost_list_wellbehaved(cost_list)) { | 
|  | int ir, ic; | 
|  | get_cost_surf_min(cost_list, &ir, &ic, 1); | 
|  | if (ir != 0 || ic != 0) { | 
|  | const MV this_mv = { start_mv.row + ir * hstep, | 
|  | start_mv.col + ic * hstep }; | 
|  | int dummy = 0; | 
|  | check_better_fast(xd, cm, &this_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | } | 
|  | } else { | 
|  | two_level_checks_fast(xd, cm, start_mv, bestmv, hstep, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, iters_per_step, is_scaled); | 
|  | } | 
|  |  | 
|  | // Each subsequent iteration checks at least one point in common with | 
|  | // the last iteration could be 2 ( if diag selected) 1/4 pel | 
|  | if (forced_stop < HALF_PEL) { | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, *bestmv, iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  | iter++; | 
|  |  | 
|  | hstep >>= 1; | 
|  | start_mv = *bestmv; | 
|  | two_level_checks_fast(xd, cm, start_mv, bestmv, hstep, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, iters_per_step, is_scaled); | 
|  | } | 
|  |  | 
|  | if (allow_hp && forced_stop == EIGHTH_PEL) { | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, *bestmv, iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  | iter++; | 
|  |  | 
|  | hstep >>= 1; | 
|  | start_mv = *bestmv; | 
|  | two_level_checks_fast(xd, cm, start_mv, bestmv, hstep, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, iters_per_step, is_scaled); | 
|  | } | 
|  |  | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | int av1_find_best_sub_pixel_tree_pruned( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, MV start_mv, MV *bestmv, | 
|  | int *distortion, unsigned int *sse1, int_mv *last_mv_search_list) { | 
|  | (void)cm; | 
|  | const int allow_hp = ms_params->allow_hp; | 
|  | const int forced_stop = ms_params->forced_stop; | 
|  | const int iters_per_step = ms_params->iters_per_step; | 
|  | const int *cost_list = ms_params->cost_list; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | 
|  |  | 
|  | // The iteration we are current searching for. Iter 0 corresponds to fullpel | 
|  | // mv, iter 1 to half pel, and so on | 
|  | int iter = 0; | 
|  | int hstep = INIT_SUBPEL_STEP_SIZE;  // Step size, initialized to 4/8=1/2 pel | 
|  | unsigned int besterr = INT_MAX; | 
|  | *bestmv = start_mv; | 
|  |  | 
|  | const struct scale_factors *const sf = is_intrabc_block(xd->mi[0]) | 
|  | ? &cm->sf_identity | 
|  | : xd->block_ref_scale_factors[0]; | 
|  | const int is_scaled = av1_is_scaled(sf); | 
|  | besterr = setup_center_error_facade( | 
|  | xd, cm, bestmv, var_params, mv_cost_params, sse1, distortion, is_scaled); | 
|  |  | 
|  | // If forced_stop is FULL_PEL, return. | 
|  | if (forced_stop == FULL_PEL) return besterr; | 
|  |  | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, *bestmv, iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  | iter++; | 
|  |  | 
|  | if (cost_list && cost_list[0] != INT_MAX && cost_list[1] != INT_MAX && | 
|  | cost_list[2] != INT_MAX && cost_list[3] != INT_MAX && | 
|  | cost_list[4] != INT_MAX) { | 
|  | const unsigned int whichdir = (cost_list[1] < cost_list[3] ? 0 : 1) + | 
|  | (cost_list[2] < cost_list[4] ? 0 : 2); | 
|  |  | 
|  | const MV left_mv = { start_mv.row, start_mv.col - hstep }; | 
|  | const MV right_mv = { start_mv.row, start_mv.col + hstep }; | 
|  | const MV bottom_mv = { start_mv.row + hstep, start_mv.col }; | 
|  | const MV top_mv = { start_mv.row - hstep, start_mv.col }; | 
|  |  | 
|  | const MV bottom_left_mv = { start_mv.row + hstep, start_mv.col - hstep }; | 
|  | const MV bottom_right_mv = { start_mv.row + hstep, start_mv.col + hstep }; | 
|  | const MV top_left_mv = { start_mv.row - hstep, start_mv.col - hstep }; | 
|  | const MV top_right_mv = { start_mv.row - hstep, start_mv.col + hstep }; | 
|  |  | 
|  | int dummy = 0; | 
|  |  | 
|  | switch (whichdir) { | 
|  | case 0:  // bottom left quadrant | 
|  | check_better_fast(xd, cm, &left_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &bottom_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &bottom_left_mv, bestmv, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, &dummy, is_scaled); | 
|  | break; | 
|  | case 1:  // bottom right quadrant | 
|  | check_better_fast(xd, cm, &right_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &bottom_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &bottom_right_mv, bestmv, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, &dummy, is_scaled); | 
|  | break; | 
|  | case 2:  // top left quadrant | 
|  | check_better_fast(xd, cm, &left_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &top_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &top_left_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | break; | 
|  | case 3:  // top right quadrant | 
|  | check_better_fast(xd, cm, &right_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &top_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | check_better_fast(xd, cm, &top_right_mv, bestmv, mv_limits, var_params, | 
|  | mv_cost_params, &besterr, sse1, distortion, &dummy, | 
|  | is_scaled); | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | two_level_checks_fast(xd, cm, start_mv, bestmv, hstep, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, iters_per_step, is_scaled); | 
|  | } | 
|  |  | 
|  | // Each subsequent iteration checks at least one point in common with | 
|  | // the last iteration could be 2 ( if diag selected) 1/4 pel | 
|  | if (forced_stop < HALF_PEL) { | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, *bestmv, iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  | iter++; | 
|  |  | 
|  | hstep >>= 1; | 
|  | start_mv = *bestmv; | 
|  | two_level_checks_fast(xd, cm, start_mv, bestmv, hstep, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, iters_per_step, is_scaled); | 
|  | } | 
|  |  | 
|  | if (allow_hp && forced_stop == EIGHTH_PEL) { | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, *bestmv, iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  | iter++; | 
|  |  | 
|  | hstep >>= 1; | 
|  | start_mv = *bestmv; | 
|  | two_level_checks_fast(xd, cm, start_mv, bestmv, hstep, mv_limits, | 
|  | var_params, mv_cost_params, &besterr, sse1, | 
|  | distortion, iters_per_step, is_scaled); | 
|  | } | 
|  |  | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | int av1_find_best_sub_pixel_tree(MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | MV start_mv, MV *bestmv, int *distortion, | 
|  | unsigned int *sse1, | 
|  | int_mv *last_mv_search_list) { | 
|  | const int allow_hp = ms_params->allow_hp; | 
|  | const int forced_stop = ms_params->forced_stop; | 
|  | const int iters_per_step = ms_params->iters_per_step; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | 
|  | const SUBPEL_SEARCH_TYPE subpel_search_type = | 
|  | ms_params->var_params.subpel_search_type; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  |  | 
|  | // How many steps to take. A round of 0 means fullpel search only, 1 means | 
|  | // half-pel, and so on. | 
|  | const int round = AOMMIN(FULL_PEL - forced_stop, 3 - !allow_hp); | 
|  | int hstep = INIT_SUBPEL_STEP_SIZE;  // Step size, initialized to 4/8=1/2 pel | 
|  |  | 
|  | unsigned int besterr = INT_MAX; | 
|  |  | 
|  | *bestmv = start_mv; | 
|  |  | 
|  | const struct scale_factors *const sf = is_intrabc_block(xd->mi[0]) | 
|  | ? &cm->sf_identity | 
|  | : xd->block_ref_scale_factors[0]; | 
|  | const int is_scaled = av1_is_scaled(sf); | 
|  |  | 
|  | if (subpel_search_type != USE_2_TAPS_ORIG) { | 
|  | besterr = upsampled_setup_center_error(xd, cm, bestmv, var_params, | 
|  | mv_cost_params, sse1, distortion); | 
|  | } else { | 
|  | besterr = setup_center_error(xd, bestmv, var_params, mv_cost_params, sse1, | 
|  | distortion); | 
|  | } | 
|  |  | 
|  | // If forced_stop is FULL_PEL, return. | 
|  | if (!round) return besterr; | 
|  |  | 
|  | for (int iter = 0; iter < round; ++iter) { | 
|  | MV iter_center_mv = *bestmv; | 
|  | if (check_repeated_mv_and_update(last_mv_search_list, iter_center_mv, | 
|  | iter)) { | 
|  | return INT_MAX; | 
|  | } | 
|  |  | 
|  | MV diag_step; | 
|  | if (subpel_search_type != USE_2_TAPS_ORIG) { | 
|  | diag_step = first_level_check(xd, cm, iter_center_mv, bestmv, hstep, | 
|  | mv_limits, var_params, mv_cost_params, | 
|  | &besterr, sse1, distortion); | 
|  | } else { | 
|  | diag_step = first_level_check_fast(xd, cm, iter_center_mv, bestmv, hstep, | 
|  | mv_limits, var_params, mv_cost_params, | 
|  | &besterr, sse1, distortion, is_scaled); | 
|  | } | 
|  |  | 
|  | // Check diagonal sub-pixel position | 
|  | if (!CHECK_MV_EQUAL(iter_center_mv, *bestmv) && iters_per_step > 1) { | 
|  | second_level_check_v2(xd, cm, iter_center_mv, diag_step, bestmv, | 
|  | mv_limits, var_params, mv_cost_params, &besterr, | 
|  | sse1, distortion, is_scaled); | 
|  | } | 
|  |  | 
|  | hstep >>= 1; | 
|  | } | 
|  |  | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | // Note(yunqingwang): The following 2 functions are only used in the motion | 
|  | // vector unit test, which return extreme motion vectors allowed by the MV | 
|  | // limits. | 
|  | // Returns the maximum MV. | 
|  | int av1_return_max_sub_pixel_mv(MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | MV start_mv, MV *bestmv, int *distortion, | 
|  | unsigned int *sse1, | 
|  | int_mv *last_mv_search_list) { | 
|  | (void)xd; | 
|  | (void)cm; | 
|  | (void)start_mv; | 
|  | (void)sse1; | 
|  | (void)distortion; | 
|  | (void)last_mv_search_list; | 
|  |  | 
|  | const int allow_hp = ms_params->allow_hp; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  |  | 
|  | bestmv->row = mv_limits->row_max; | 
|  | bestmv->col = mv_limits->col_max; | 
|  |  | 
|  | unsigned int besterr = 0; | 
|  |  | 
|  | // In the sub-pel motion search, if hp is not used, then the last bit of mv | 
|  | // has to be 0. | 
|  | lower_mv_precision(bestmv, allow_hp, 0); | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | // Returns the minimum MV. | 
|  | int av1_return_min_sub_pixel_mv(MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | MV start_mv, MV *bestmv, int *distortion, | 
|  | unsigned int *sse1, | 
|  | int_mv *last_mv_search_list) { | 
|  | (void)xd; | 
|  | (void)cm; | 
|  | (void)start_mv; | 
|  | (void)sse1; | 
|  | (void)distortion; | 
|  | (void)last_mv_search_list; | 
|  |  | 
|  | const int allow_hp = ms_params->allow_hp; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  |  | 
|  | bestmv->row = mv_limits->row_min; | 
|  | bestmv->col = mv_limits->col_min; | 
|  |  | 
|  | unsigned int besterr = 0; | 
|  | // In the sub-pel motion search, if hp is not used, then the last bit of mv | 
|  | // has to be 0. | 
|  | lower_mv_precision(bestmv, allow_hp, 0); | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | #if !CONFIG_REALTIME_ONLY | 
|  | // Computes the cost of the current predictor by going through the whole | 
|  | // av1_enc_build_inter_predictor pipeline. This is mainly used by warped mv | 
|  | // during motion_mode_rd. We are going through the whole | 
|  | // av1_enc_build_inter_predictor because we might have changed the interpolation | 
|  | // filter, etc before motion_mode_rd is called. | 
|  | static INLINE unsigned int compute_motion_cost( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, BLOCK_SIZE bsize, | 
|  | const MV *this_mv) { | 
|  | unsigned int mse; | 
|  | unsigned int sse; | 
|  | const int mi_row = xd->mi_row; | 
|  | const int mi_col = xd->mi_col; | 
|  |  | 
|  | av1_enc_build_inter_predictor(cm, xd, mi_row, mi_col, NULL, bsize, | 
|  | AOM_PLANE_Y, AOM_PLANE_Y); | 
|  |  | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  |  | 
|  | const uint8_t *const src = ms_buffers->src->buf; | 
|  | const int src_stride = ms_buffers->src->stride; | 
|  | const uint8_t *const dst = xd->plane[0].dst.buf; | 
|  | const int dst_stride = xd->plane[0].dst.stride; | 
|  | const aom_variance_fn_ptr_t *vfp = ms_params->var_params.vfp; | 
|  |  | 
|  | mse = vfp->vf(dst, dst_stride, src, src_stride, &sse); | 
|  | mse += mv_err_cost_(this_mv, &ms_params->mv_cost_params); | 
|  | return mse; | 
|  | } | 
|  |  | 
|  | // Refines MV in a small range | 
|  | unsigned int av1_refine_warped_mv(MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | 
|  | BLOCK_SIZE bsize, const int *pts0, | 
|  | const int *pts_inref0, int total_samples) { | 
|  | MB_MODE_INFO *mbmi = xd->mi[0]; | 
|  | static const MV neighbors[8] = { { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 }, | 
|  | { 0, -2 }, { 2, 0 }, { 0, 2 }, { -2, 0 } }; | 
|  | MV *best_mv = &mbmi->mv[0].as_mv; | 
|  |  | 
|  | WarpedMotionParams best_wm_params = mbmi->wm_params; | 
|  | int best_num_proj_ref = mbmi->num_proj_ref; | 
|  | unsigned int bestmse; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  |  | 
|  | const int start = ms_params->allow_hp ? 0 : 4; | 
|  |  | 
|  | // Calculate the center position's error | 
|  | assert(av1_is_subpelmv_in_range(mv_limits, *best_mv)); | 
|  | bestmse = compute_motion_cost(xd, cm, ms_params, bsize, best_mv); | 
|  |  | 
|  | // MV search | 
|  | int pts[SAMPLES_ARRAY_SIZE], pts_inref[SAMPLES_ARRAY_SIZE]; | 
|  | const int mi_row = xd->mi_row; | 
|  | const int mi_col = xd->mi_col; | 
|  | for (int ite = 0; ite < 2; ++ite) { | 
|  | int best_idx = -1; | 
|  |  | 
|  | for (int idx = start; idx < start + 4; ++idx) { | 
|  | unsigned int thismse; | 
|  |  | 
|  | MV this_mv = { best_mv->row + neighbors[idx].row, | 
|  | best_mv->col + neighbors[idx].col }; | 
|  | if (av1_is_subpelmv_in_range(mv_limits, this_mv)) { | 
|  | memcpy(pts, pts0, total_samples * 2 * sizeof(*pts0)); | 
|  | memcpy(pts_inref, pts_inref0, total_samples * 2 * sizeof(*pts_inref0)); | 
|  | if (total_samples > 1) { | 
|  | mbmi->num_proj_ref = | 
|  | av1_selectSamples(&this_mv, pts, pts_inref, total_samples, bsize); | 
|  | } | 
|  |  | 
|  | if (!av1_find_projection(mbmi->num_proj_ref, pts, pts_inref, bsize, | 
|  | this_mv.row, this_mv.col, &mbmi->wm_params, | 
|  | mi_row, mi_col)) { | 
|  | thismse = compute_motion_cost(xd, cm, ms_params, bsize, &this_mv); | 
|  |  | 
|  | if (thismse < bestmse) { | 
|  | best_idx = idx; | 
|  | best_wm_params = mbmi->wm_params; | 
|  | best_num_proj_ref = mbmi->num_proj_ref; | 
|  | bestmse = thismse; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (best_idx == -1) break; | 
|  |  | 
|  | if (best_idx >= 0) { | 
|  | best_mv->row += neighbors[best_idx].row; | 
|  | best_mv->col += neighbors[best_idx].col; | 
|  | } | 
|  | } | 
|  |  | 
|  | mbmi->wm_params = best_wm_params; | 
|  | mbmi->num_proj_ref = best_num_proj_ref; | 
|  | return bestmse; | 
|  | } | 
|  | #endif  // !CONFIG_REALTIME_ONLY | 
|  | // ============================================================================= | 
|  | //  Subpixel Motion Search: OBMC | 
|  | // ============================================================================= | 
|  | // Estimates the variance of prediction residue | 
|  | static INLINE int estimate_obmc_pref_error( | 
|  | const MV *this_mv, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | unsigned int *sse) { | 
|  | const aom_variance_fn_ptr_t *vfp = var_params->vfp; | 
|  |  | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  | const int32_t *src = ms_buffers->wsrc; | 
|  | const int32_t *mask = ms_buffers->obmc_mask; | 
|  | const uint8_t *ref = get_buf_from_mv(ms_buffers->ref, *this_mv); | 
|  | const int ref_stride = ms_buffers->ref->stride; | 
|  |  | 
|  | const int subpel_x_q3 = get_subpel_part(this_mv->col); | 
|  | const int subpel_y_q3 = get_subpel_part(this_mv->row); | 
|  |  | 
|  | return vfp->osvf(ref, ref_stride, subpel_x_q3, subpel_y_q3, src, mask, sse); | 
|  | } | 
|  |  | 
|  | // Calculates the variance of prediction residue | 
|  | static int upsampled_obmc_pref_error(MACROBLOCKD *xd, const AV1_COMMON *cm, | 
|  | const MV *this_mv, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | unsigned int *sse) { | 
|  | const aom_variance_fn_ptr_t *vfp = var_params->vfp; | 
|  | const SUBPEL_SEARCH_TYPE subpel_search_type = var_params->subpel_search_type; | 
|  | const int w = var_params->w; | 
|  | const int h = var_params->h; | 
|  |  | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  | const int32_t *wsrc = ms_buffers->wsrc; | 
|  | const int32_t *mask = ms_buffers->obmc_mask; | 
|  | const uint8_t *ref = get_buf_from_mv(ms_buffers->ref, *this_mv); | 
|  | const int ref_stride = ms_buffers->ref->stride; | 
|  |  | 
|  | const int subpel_x_q3 = get_subpel_part(this_mv->col); | 
|  | const int subpel_y_q3 = get_subpel_part(this_mv->row); | 
|  |  | 
|  | const int mi_row = xd->mi_row; | 
|  | const int mi_col = xd->mi_col; | 
|  |  | 
|  | unsigned int besterr; | 
|  | DECLARE_ALIGNED(16, uint8_t, pred[2 * MAX_SB_SQUARE]); | 
|  | #if CONFIG_AV1_HIGHBITDEPTH | 
|  | if (is_cur_buf_hbd(xd)) { | 
|  | uint8_t *pred8 = CONVERT_TO_BYTEPTR(pred); | 
|  | aom_highbd_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred8, w, h, | 
|  | subpel_x_q3, subpel_y_q3, ref, ref_stride, xd->bd, | 
|  | subpel_search_type); | 
|  | besterr = vfp->ovf(pred8, w, wsrc, mask, sse); | 
|  | } else { | 
|  | aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, subpel_x_q3, | 
|  | subpel_y_q3, ref, ref_stride, subpel_search_type); | 
|  |  | 
|  | besterr = vfp->ovf(pred, w, wsrc, mask, sse); | 
|  | } | 
|  | #else | 
|  | aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, subpel_x_q3, | 
|  | subpel_y_q3, ref, ref_stride, subpel_search_type); | 
|  |  | 
|  | besterr = vfp->ovf(pred, w, wsrc, mask, sse); | 
|  | #endif | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | static unsigned int setup_obmc_center_error( | 
|  | const MV *this_mv, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | 
|  | // TODO(chiyotsai@google.com): There might be a bug here where we didn't use | 
|  | // get_buf_from_mv(ref, *this_mv). | 
|  | const MSBuffers *ms_buffers = &var_params->ms_buffers; | 
|  | const int32_t *wsrc = ms_buffers->wsrc; | 
|  | const int32_t *mask = ms_buffers->obmc_mask; | 
|  | const uint8_t *ref = ms_buffers->ref->buf; | 
|  | const int ref_stride = ms_buffers->ref->stride; | 
|  | unsigned int besterr = | 
|  | var_params->vfp->ovf(ref, ref_stride, wsrc, mask, sse1); | 
|  | *distortion = besterr; | 
|  | besterr += mv_err_cost_(this_mv, mv_cost_params); | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | static unsigned int upsampled_setup_obmc_center_error( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV *this_mv, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | 
|  | unsigned int besterr = | 
|  | upsampled_obmc_pref_error(xd, cm, this_mv, var_params, sse1); | 
|  | *distortion = besterr; | 
|  | besterr += mv_err_cost_(this_mv, mv_cost_params); | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | // Estimates the variance of prediction residue | 
|  | // TODO(chiyotsai@google.com): the cost does does not match the cost in | 
|  | // mv_cost_. Investigate this later. | 
|  | static INLINE int estimate_obmc_mvcost(const MV *this_mv, | 
|  | const MV_COST_PARAMS *mv_cost_params) { | 
|  | const MV *ref_mv = mv_cost_params->ref_mv; | 
|  | const int *mvjcost = mv_cost_params->mvjcost; | 
|  | const int *const *mvcost = mv_cost_params->mvcost; | 
|  | const int error_per_bit = mv_cost_params->error_per_bit; | 
|  | const MV_COST_TYPE mv_cost_type = mv_cost_params->mv_cost_type; | 
|  | const MV diff_mv = { GET_MV_SUBPEL(this_mv->row - ref_mv->row), | 
|  | GET_MV_SUBPEL(this_mv->col - ref_mv->col) }; | 
|  |  | 
|  | switch (mv_cost_type) { | 
|  | case MV_COST_ENTROPY: | 
|  | return (unsigned)((mv_cost(&diff_mv, mvjcost, | 
|  | CONVERT_TO_CONST_MVCOST(mvcost)) * | 
|  | error_per_bit + | 
|  | 4096) >> | 
|  | 13); | 
|  | case MV_COST_NONE: return 0; | 
|  | default: | 
|  | assert(0 && "L1 norm is not tuned for estimated obmc mvcost"); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Estimates whether this_mv is better than best_mv. This function incorporates | 
|  | // both prediction error and residue into account. | 
|  | static INLINE unsigned int obmc_check_better_fast( | 
|  | const MV *this_mv, MV *best_mv, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int *has_better_mv) { | 
|  | unsigned int cost; | 
|  | if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | 
|  | unsigned int sse; | 
|  | const int thismse = estimate_obmc_pref_error(this_mv, var_params, &sse); | 
|  |  | 
|  | cost = estimate_obmc_mvcost(this_mv, mv_cost_params); | 
|  | cost += thismse; | 
|  |  | 
|  | if (cost < *besterr) { | 
|  | *besterr = cost; | 
|  | *best_mv = *this_mv; | 
|  | *distortion = thismse; | 
|  | *sse1 = sse; | 
|  | *has_better_mv |= 1; | 
|  | } | 
|  | } else { | 
|  | cost = INT_MAX; | 
|  | } | 
|  | return cost; | 
|  | } | 
|  |  | 
|  | // Estimates whether this_mv is better than best_mv. This function incorporates | 
|  | // both prediction error and residue into account. | 
|  | static INLINE unsigned int obmc_check_better( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *cm, const MV *this_mv, MV *best_mv, | 
|  | const SubpelMvLimits *mv_limits, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion, int *has_better_mv) { | 
|  | unsigned int cost; | 
|  | if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | 
|  | unsigned int sse; | 
|  | const int thismse = | 
|  | upsampled_obmc_pref_error(xd, cm, this_mv, var_params, &sse); | 
|  | cost = mv_err_cost_(this_mv, mv_cost_params); | 
|  |  | 
|  | cost += thismse; | 
|  |  | 
|  | if (cost < *besterr) { | 
|  | *besterr = cost; | 
|  | *best_mv = *this_mv; | 
|  | *distortion = thismse; | 
|  | *sse1 = sse; | 
|  | *has_better_mv |= 1; | 
|  | } | 
|  | } else { | 
|  | cost = INT_MAX; | 
|  | } | 
|  | return cost; | 
|  | } | 
|  |  | 
|  | static AOM_FORCE_INLINE MV obmc_first_level_check( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV *best_mv, | 
|  | const int hstep, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion) { | 
|  | int dummy = 0; | 
|  | const MV left_mv = { this_mv.row, this_mv.col - hstep }; | 
|  | const MV right_mv = { this_mv.row, this_mv.col + hstep }; | 
|  | const MV top_mv = { this_mv.row - hstep, this_mv.col }; | 
|  | const MV bottom_mv = { this_mv.row + hstep, this_mv.col }; | 
|  |  | 
|  | if (var_params->subpel_search_type != USE_2_TAPS_ORIG) { | 
|  | const unsigned int left = | 
|  | obmc_check_better(xd, cm, &left_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  | const unsigned int right = | 
|  | obmc_check_better(xd, cm, &right_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  | const unsigned int up = | 
|  | obmc_check_better(xd, cm, &top_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  | const unsigned int down = | 
|  | obmc_check_better(xd, cm, &bottom_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  |  | 
|  | const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | 
|  | const MV diag_mv = { this_mv.row + diag_step.row, | 
|  | this_mv.col + diag_step.col }; | 
|  |  | 
|  | // Check the diagonal direction with the best mv | 
|  | obmc_check_better(xd, cm, &diag_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  |  | 
|  | return diag_step; | 
|  | } else { | 
|  | const unsigned int left = obmc_check_better_fast( | 
|  | &left_mv, best_mv, mv_limits, var_params, mv_cost_params, besterr, sse1, | 
|  | distortion, &dummy); | 
|  | const unsigned int right = obmc_check_better_fast( | 
|  | &right_mv, best_mv, mv_limits, var_params, mv_cost_params, besterr, | 
|  | sse1, distortion, &dummy); | 
|  |  | 
|  | const unsigned int up = obmc_check_better_fast( | 
|  | &top_mv, best_mv, mv_limits, var_params, mv_cost_params, besterr, sse1, | 
|  | distortion, &dummy); | 
|  |  | 
|  | const unsigned int down = obmc_check_better_fast( | 
|  | &bottom_mv, best_mv, mv_limits, var_params, mv_cost_params, besterr, | 
|  | sse1, distortion, &dummy); | 
|  |  | 
|  | const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | 
|  | const MV diag_mv = { this_mv.row + diag_step.row, | 
|  | this_mv.col + diag_step.col }; | 
|  |  | 
|  | // Check the diagonal direction with the best mv | 
|  | obmc_check_better_fast(&diag_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, &dummy); | 
|  |  | 
|  | return diag_step; | 
|  | } | 
|  | } | 
|  |  | 
|  | // A newer version of second level check for obmc that gives better quality. | 
|  | static AOM_FORCE_INLINE void obmc_second_level_check_v2( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV diag_step, | 
|  | MV *best_mv, const SubpelMvLimits *mv_limits, | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params, | 
|  | const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | 
|  | unsigned int *sse1, int *distortion) { | 
|  | assert(best_mv->row == this_mv.row + diag_step.row || | 
|  | best_mv->col == this_mv.col + diag_step.col); | 
|  | if (CHECK_MV_EQUAL(this_mv, *best_mv)) { | 
|  | return; | 
|  | } else if (this_mv.row == best_mv->row) { | 
|  | // Search away from diagonal step since diagonal search did not provide any | 
|  | // improvement | 
|  | diag_step.row *= -1; | 
|  | } else if (this_mv.col == best_mv->col) { | 
|  | diag_step.col *= -1; | 
|  | } | 
|  |  | 
|  | const MV row_bias_mv = { best_mv->row + diag_step.row, best_mv->col }; | 
|  | const MV col_bias_mv = { best_mv->row, best_mv->col + diag_step.col }; | 
|  | const MV diag_bias_mv = { best_mv->row + diag_step.row, | 
|  | best_mv->col + diag_step.col }; | 
|  | int has_better_mv = 0; | 
|  |  | 
|  | if (var_params->subpel_search_type != USE_2_TAPS_ORIG) { | 
|  | obmc_check_better(xd, cm, &row_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv); | 
|  | obmc_check_better(xd, cm, &col_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv); | 
|  |  | 
|  | // Do an additional search if the second iteration gives a better mv | 
|  | if (has_better_mv) { | 
|  | obmc_check_better(xd, cm, &diag_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv); | 
|  | } | 
|  | } else { | 
|  | obmc_check_better_fast(&row_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv); | 
|  | obmc_check_better_fast(&col_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv); | 
|  |  | 
|  | // Do an additional search if the second iteration gives a better mv | 
|  | if (has_better_mv) { | 
|  | obmc_check_better_fast(&diag_bias_mv, best_mv, mv_limits, var_params, | 
|  | mv_cost_params, besterr, sse1, distortion, | 
|  | &has_better_mv); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int av1_find_best_obmc_sub_pixel_tree_up( | 
|  | MACROBLOCKD *xd, const AV1_COMMON *const cm, | 
|  | const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, MV start_mv, MV *bestmv, | 
|  | int *distortion, unsigned int *sse1, int_mv *last_mv_search_list) { | 
|  | (void)last_mv_search_list; | 
|  | const int allow_hp = ms_params->allow_hp; | 
|  | const int forced_stop = ms_params->forced_stop; | 
|  | const int iters_per_step = ms_params->iters_per_step; | 
|  | const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | 
|  | const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | 
|  | const SUBPEL_SEARCH_TYPE subpel_search_type = | 
|  | ms_params->var_params.subpel_search_type; | 
|  | const SubpelMvLimits *mv_limits = &ms_params->mv_limits; | 
|  |  | 
|  | int hstep = INIT_SUBPEL_STEP_SIZE; | 
|  | const int round = AOMMIN(FULL_PEL - forced_stop, 3 - !allow_hp); | 
|  |  | 
|  | unsigned int besterr = INT_MAX; | 
|  | *bestmv = start_mv; | 
|  |  | 
|  | if (subpel_search_type != USE_2_TAPS_ORIG) | 
|  | besterr = upsampled_setup_obmc_center_error( | 
|  | xd, cm, bestmv, var_params, mv_cost_params, sse1, distortion); | 
|  | else | 
|  | besterr = setup_obmc_center_error(bestmv, var_params, mv_cost_params, sse1, | 
|  | distortion); | 
|  |  | 
|  | for (int iter = 0; iter < round; ++iter) { | 
|  | MV iter_center_mv = *bestmv; | 
|  | MV diag_step = obmc_first_level_check(xd, cm, iter_center_mv, bestmv, hstep, | 
|  | mv_limits, var_params, mv_cost_params, | 
|  | &besterr, sse1, distortion); | 
|  |  | 
|  | if (!CHECK_MV_EQUAL(iter_center_mv, *bestmv) && iters_per_step > 1) { | 
|  | obmc_second_level_check_v2(xd, cm, iter_center_mv, diag_step, bestmv, | 
|  | mv_limits, var_params, mv_cost_params, | 
|  | &besterr, sse1, distortion); | 
|  | } | 
|  | hstep >>= 1; | 
|  | } | 
|  |  | 
|  | return besterr; | 
|  | } | 
|  |  | 
|  | // ============================================================================= | 
|  | //  Public cost function: mv_cost + pred error | 
|  | // ============================================================================= | 
|  | int av1_get_mvpred_sse(const MV_COST_PARAMS *mv_cost_params, | 
|  | const FULLPEL_MV best_mv, | 
|  | const aom_variance_fn_ptr_t *vfp, | 
|  | const struct buf_2d *src, const struct buf_2d *pre) { | 
|  | const MV mv = get_mv_from_fullmv(&best_mv); | 
|  | unsigned int sse, var; | 
|  |  | 
|  | var = vfp->vf(src->buf, src->stride, get_buf_from_fullmv(pre, &best_mv), | 
|  | pre->stride, &sse); | 
|  | (void)var; | 
|  |  | 
|  | return sse + mv_err_cost_(&mv, mv_cost_params); | 
|  | } | 
|  |  | 
|  | static INLINE int get_mvpred_av_var(const MV_COST_PARAMS *mv_cost_params, | 
|  | const FULLPEL_MV best_mv, | 
|  | const uint8_t *second_pred, | 
|  | const aom_variance_fn_ptr_t *vfp, | 
|  | const struct buf_2d *src, | 
|  | const struct buf_2d *pre) { | 
|  | const MV mv = get_mv_from_fullmv(&best_mv); | 
|  | unsigned int unused; | 
|  |  | 
|  | return vfp->svaf(get_buf_from_fullmv(pre, &best_mv), pre->stride, 0, 0, | 
|  | src->buf, src->stride, &unused, second_pred) + | 
|  | mv_err_cost_(&mv, mv_cost_params); | 
|  | } | 
|  |  | 
|  | static INLINE int get_mvpred_mask_var( | 
|  | const MV_COST_PARAMS *mv_cost_params, const FULLPEL_MV best_mv, | 
|  | const uint8_t *second_pred, const uint8_t *mask, int mask_stride, | 
|  | int invert_mask, const aom_variance_fn_ptr_t *vfp, const struct buf_2d *src, | 
|  | const struct buf_2d *pre) { | 
|  | const MV mv = get_mv_from_fullmv(&best_mv); | 
|  | unsigned int unused; | 
|  |  | 
|  | return vfp->msvf(get_buf_from_fullmv(pre, &best_mv), pre->stride, 0, 0, | 
|  | src->buf, src->stride, second_pred, mask, mask_stride, | 
|  | invert_mask, &unused) + | 
|  | mv_err_cost_(&mv, mv_cost_params); | 
|  | } | 
|  |  | 
|  | int av1_get_mvpred_compound_var(const MV_COST_PARAMS *mv_cost_params, | 
|  | const FULLPEL_MV best_mv, | 
|  | const uint8_t *second_pred, const uint8_t *mask, | 
|  | int mask_stride, int invert_mask, | 
|  | const aom_variance_fn_ptr_t *vfp, | 
|  | const struct buf_2d *src, | 
|  | const struct buf_2d *pre) { | 
|  | if (mask) { | 
|  | return get_mvpred_mask_var(mv_cost_params, best_mv, second_pred, mask, | 
|  | mask_stride, invert_mask, vfp, src, pre); | 
|  | } else { | 
|  | return get_mvpred_av_var(mv_cost_params, best_mv, second_pred, vfp, src, | 
|  | pre); | 
|  | } | 
|  | } |