|  | /* | 
|  | * Copyright (c) 2016, Alliance for Open Media. All rights reserved | 
|  | * | 
|  | * This source code is subject to the terms of the BSD 2 Clause License and | 
|  | * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
|  | * was not distributed with this source code in the LICENSE file, you can | 
|  | * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
|  | * Media Patent License 1.0 was not distributed with this source code in the | 
|  | * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
|  | */ | 
|  |  | 
|  | #include <math.h> | 
|  |  | 
|  | #include "aom_ports/mem.h" | 
|  |  | 
|  | #include "av1/encoder/aq_variance.h" | 
|  | #include "av1/common/seg_common.h" | 
|  | #include "av1/encoder/encodeframe.h" | 
|  | #include "av1/encoder/ratectrl.h" | 
|  | #include "av1/encoder/rd.h" | 
|  | #include "av1/encoder/segmentation.h" | 
|  | #include "av1/encoder/dwt.h" | 
|  |  | 
|  | static const double rate_ratio[MAX_SEGMENTS] = { 2.2, 1.7, 1.3, 1.0, | 
|  | 0.9, .8,  .7,  .6 }; | 
|  |  | 
|  | static const double deltaq_rate_ratio[MAX_SEGMENTS] = { 2.5,  2.0, 1.5, 1.0, | 
|  | 0.75, 1.0, 1.0, 1.0 }; | 
|  | #define ENERGY_MIN (-4) | 
|  | #define ENERGY_MAX (1) | 
|  | #define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1) | 
|  | #define ENERGY_IN_BOUNDS(energy) \ | 
|  | assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX) | 
|  |  | 
|  | DECLARE_ALIGNED(16, static const uint8_t, av1_all_zeros[MAX_SB_SIZE]) = { 0 }; | 
|  |  | 
|  | DECLARE_ALIGNED(16, static const uint16_t, | 
|  | av1_highbd_all_zeros[MAX_SB_SIZE]) = { 0 }; | 
|  |  | 
|  | static const int segment_id[ENERGY_SPAN] = { 0, 1, 1, 2, 3, 4 }; | 
|  |  | 
|  | #define SEGMENT_ID(i) segment_id[(i)-ENERGY_MIN] | 
|  |  | 
|  | void av1_vaq_frame_setup(AV1_COMP *cpi) { | 
|  | AV1_COMMON *cm = &cpi->common; | 
|  | const RefreshFrameInfo *const refresh_frame = &cpi->refresh_frame; | 
|  | const int base_qindex = cm->quant_params.base_qindex; | 
|  | struct segmentation *seg = &cm->seg; | 
|  | int i; | 
|  |  | 
|  | int resolution_change = | 
|  | cm->prev_frame && (cm->width != cm->prev_frame->width || | 
|  | cm->height != cm->prev_frame->height); | 
|  | int avg_energy = (int)(cpi->twopass_frame.mb_av_energy - 2); | 
|  | double avg_ratio; | 
|  | if (avg_energy > 7) avg_energy = 7; | 
|  | if (avg_energy < 0) avg_energy = 0; | 
|  | avg_ratio = rate_ratio[avg_energy]; | 
|  |  | 
|  | if (resolution_change) { | 
|  | memset(cpi->enc_seg.map, 0, cm->mi_params.mi_rows * cm->mi_params.mi_cols); | 
|  | av1_clearall_segfeatures(seg); | 
|  | av1_disable_segmentation(seg); | 
|  | return; | 
|  | } | 
|  | if (frame_is_intra_only(cm) || cm->features.error_resilient_mode || | 
|  | refresh_frame->alt_ref_frame || | 
|  | (refresh_frame->golden_frame && !cpi->rc.is_src_frame_alt_ref)) { | 
|  | cpi->vaq_refresh = 1; | 
|  |  | 
|  | av1_enable_segmentation(seg); | 
|  | av1_clearall_segfeatures(seg); | 
|  |  | 
|  | for (i = 0; i < MAX_SEGMENTS; ++i) { | 
|  | // Set up avg segment id to be 1.0 and adjust the other segments around | 
|  | // it. | 
|  | int qindex_delta = | 
|  | av1_compute_qdelta_by_rate(cpi, cm->current_frame.frame_type, | 
|  | base_qindex, rate_ratio[i] / avg_ratio); | 
|  |  | 
|  | // We don't allow qindex 0 in a segment if the base value is not 0. | 
|  | // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment | 
|  | // Q delta is sometimes applied without going back around the rd loop. | 
|  | // This could lead to an illegal combination of partition size and q. | 
|  | if ((base_qindex != 0) && ((base_qindex + qindex_delta) == 0)) { | 
|  | qindex_delta = -base_qindex + 1; | 
|  | } | 
|  |  | 
|  | av1_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta); | 
|  | av1_enable_segfeature(seg, i, SEG_LVL_ALT_Q); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int av1_log_block_var(const AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { | 
|  | // This functions returns a score for the blocks local variance as calculated | 
|  | // by: sum of the log of the (4x4 variances) of each subblock to the current | 
|  | // block (x,bs) | 
|  | // * 32 / number of pixels in the block_size. | 
|  | // This is used for segmentation because to avoid situations in which a large | 
|  | // block with a gentle gradient gets marked high variance even though each | 
|  | // subblock has a low variance.   This allows us to assign the same segment | 
|  | // number for the same sorts of area regardless of how the partitioning goes. | 
|  |  | 
|  | MACROBLOCKD *xd = &x->e_mbd; | 
|  | double var = 0; | 
|  | unsigned int sse; | 
|  | int i, j; | 
|  |  | 
|  | int right_overflow = | 
|  | (xd->mb_to_right_edge < 0) ? ((-xd->mb_to_right_edge) >> 3) : 0; | 
|  | int bottom_overflow = | 
|  | (xd->mb_to_bottom_edge < 0) ? ((-xd->mb_to_bottom_edge) >> 3) : 0; | 
|  |  | 
|  | const int bw = MI_SIZE * mi_size_wide[bs] - right_overflow; | 
|  | const int bh = MI_SIZE * mi_size_high[bs] - bottom_overflow; | 
|  |  | 
|  | for (i = 0; i < bh; i += 4) { | 
|  | for (j = 0; j < bw; j += 4) { | 
|  | if (is_cur_buf_hbd(xd)) { | 
|  | var += | 
|  | log(1.0 + cpi->ppi->fn_ptr[BLOCK_4X4].vf( | 
|  | x->plane[0].src.buf + i * x->plane[0].src.stride + j, | 
|  | x->plane[0].src.stride, | 
|  | CONVERT_TO_BYTEPTR(av1_highbd_all_zeros), 0, &sse) / | 
|  | 16.0); | 
|  | } else { | 
|  | var += | 
|  | log(1.0 + cpi->ppi->fn_ptr[BLOCK_4X4].vf( | 
|  | x->plane[0].src.buf + i * x->plane[0].src.stride + j, | 
|  | x->plane[0].src.stride, av1_all_zeros, 0, &sse) / | 
|  | 16.0); | 
|  | } | 
|  | } | 
|  | } | 
|  | // Use average of 4x4 log variance. The range for 8 bit 0 - 9.704121561. | 
|  | var /= (bw / 4 * bh / 4); | 
|  | if (var > 7) var = 7; | 
|  |  | 
|  | return (int)(var); | 
|  | } | 
|  |  | 
|  | int av1_log_block_avg(const AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs, | 
|  | int mi_row, int mi_col) { | 
|  | // This functions returns the block average of luma block | 
|  | unsigned int sum, avg, num_pix; | 
|  | int r, c; | 
|  | const int pic_w = cpi->common.width; | 
|  | const int pic_h = cpi->common.height; | 
|  | const int bw = MI_SIZE * mi_size_wide[bs]; | 
|  | const int bh = MI_SIZE * mi_size_high[bs]; | 
|  | const uint16_t *x16 = CONVERT_TO_SHORTPTR(x->plane[0].src.buf); | 
|  |  | 
|  | sum = 0; | 
|  | num_pix = 0; | 
|  | avg = 0; | 
|  | int row = mi_row << MI_SIZE_LOG2; | 
|  | int col = mi_col << MI_SIZE_LOG2; | 
|  | for (r = row; (r < (row + bh)) && (r < pic_h); r++) { | 
|  | for (c = col; (c < (col + bw)) && (c < pic_w); c++) { | 
|  | sum += *(x16 + r * x->plane[0].src.stride + c); | 
|  | num_pix++; | 
|  | } | 
|  | } | 
|  | if (num_pix != 0) { | 
|  | avg = sum / num_pix; | 
|  | } | 
|  | return avg; | 
|  | } | 
|  |  | 
|  | #define DEFAULT_E_MIDPOINT 10.0 | 
|  |  | 
|  | static unsigned int haar_ac_energy(MACROBLOCK *x, BLOCK_SIZE bs) { | 
|  | MACROBLOCKD *xd = &x->e_mbd; | 
|  | int stride = x->plane[0].src.stride; | 
|  | uint8_t *buf = x->plane[0].src.buf; | 
|  | const int num_8x8_cols = block_size_wide[bs] / 8; | 
|  | const int num_8x8_rows = block_size_high[bs] / 8; | 
|  | const int hbd = is_cur_buf_hbd(xd); | 
|  |  | 
|  | int64_t var = av1_haar_ac_sad_mxn_uint8_input(buf, stride, hbd, num_8x8_rows, | 
|  | num_8x8_cols); | 
|  |  | 
|  | return (unsigned int)((uint64_t)var * 256) >> num_pels_log2_lookup[bs]; | 
|  | } | 
|  |  | 
|  | double av1_log_block_wavelet_energy(MACROBLOCK *x, BLOCK_SIZE bs) { | 
|  | unsigned int haar_sad = haar_ac_energy(x, bs); | 
|  | return log(haar_sad + 1.0); | 
|  | } | 
|  |  | 
|  | int av1_block_wavelet_energy_level(const AV1_COMP *cpi, MACROBLOCK *x, | 
|  | BLOCK_SIZE bs) { | 
|  | double energy, energy_midpoint; | 
|  | energy_midpoint = (is_stat_consumption_stage_twopass(cpi)) | 
|  | ? cpi->twopass_frame.frame_avg_haar_energy | 
|  | : DEFAULT_E_MIDPOINT; | 
|  | energy = av1_log_block_wavelet_energy(x, bs) - energy_midpoint; | 
|  | return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX); | 
|  | } | 
|  |  | 
|  | int av1_compute_q_from_energy_level_deltaq_mode(const AV1_COMP *const cpi, | 
|  | int block_var_level) { | 
|  | int rate_level; | 
|  | const AV1_COMMON *const cm = &cpi->common; | 
|  |  | 
|  | if (DELTA_Q_PERCEPTUAL_MODULATION == 1) { | 
|  | ENERGY_IN_BOUNDS(block_var_level); | 
|  | rate_level = SEGMENT_ID(block_var_level); | 
|  | } else { | 
|  | rate_level = block_var_level; | 
|  | } | 
|  | const int base_qindex = cm->quant_params.base_qindex; | 
|  | int qindex_delta = | 
|  | av1_compute_qdelta_by_rate(cpi, cm->current_frame.frame_type, base_qindex, | 
|  | deltaq_rate_ratio[rate_level]); | 
|  |  | 
|  | if ((base_qindex != 0) && ((base_qindex + qindex_delta) == 0)) { | 
|  | qindex_delta = -base_qindex + 1; | 
|  | } | 
|  | return base_qindex + qindex_delta; | 
|  | } |