| /* | 
 |  * Copyright (c) 2020, Alliance for Open Media. All rights reserved | 
 |  * | 
 |  * This source code is subject to the terms of the BSD 2 Clause License and | 
 |  * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
 |  * was not distributed with this source code in the LICENSE file, you can | 
 |  * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
 |  * Media Patent License 1.0 was not distributed with this source code in the | 
 |  * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
 |  */ | 
 |  | 
 | #include "aom_dsp/binary_codes_writer.h" | 
 |  | 
 | #include "aom_dsp/flow_estimation/corner_detect.h" | 
 | #include "aom_dsp/flow_estimation/flow_estimation.h" | 
 | #include "aom_dsp/pyramid.h" | 
 | #include "av1/common/warped_motion.h" | 
 | #include "av1/encoder/encoder.h" | 
 | #include "av1/encoder/ethread.h" | 
 | #include "av1/encoder/rdopt.h" | 
 | #include "av1/encoder/global_motion_facade.h" | 
 |  | 
 | // Range of model types to search | 
 | #define FIRST_GLOBAL_TRANS_TYPE ROTZOOM | 
 | #define LAST_GLOBAL_TRANS_TYPE ROTZOOM | 
 |  | 
 | // Computes the cost for the warp parameters. | 
 | static int gm_get_params_cost(const WarpedMotionParams *gm, | 
 |                               const WarpedMotionParams *ref_gm, int allow_hp) { | 
 |   int params_cost = 0; | 
 |   int trans_bits, trans_prec_diff; | 
 |   switch (gm->wmtype) { | 
 |     case AFFINE: | 
 |     case ROTZOOM: | 
 |       params_cost += aom_count_signed_primitive_refsubexpfin( | 
 |           GM_ALPHA_MAX + 1, SUBEXPFIN_K, | 
 |           (ref_gm->wmmat[2] >> GM_ALPHA_PREC_DIFF) - (1 << GM_ALPHA_PREC_BITS), | 
 |           (gm->wmmat[2] >> GM_ALPHA_PREC_DIFF) - (1 << GM_ALPHA_PREC_BITS)); | 
 |       params_cost += aom_count_signed_primitive_refsubexpfin( | 
 |           GM_ALPHA_MAX + 1, SUBEXPFIN_K, | 
 |           (ref_gm->wmmat[3] >> GM_ALPHA_PREC_DIFF), | 
 |           (gm->wmmat[3] >> GM_ALPHA_PREC_DIFF)); | 
 |       if (gm->wmtype >= AFFINE) { | 
 |         params_cost += aom_count_signed_primitive_refsubexpfin( | 
 |             GM_ALPHA_MAX + 1, SUBEXPFIN_K, | 
 |             (ref_gm->wmmat[4] >> GM_ALPHA_PREC_DIFF), | 
 |             (gm->wmmat[4] >> GM_ALPHA_PREC_DIFF)); | 
 |         params_cost += aom_count_signed_primitive_refsubexpfin( | 
 |             GM_ALPHA_MAX + 1, SUBEXPFIN_K, | 
 |             (ref_gm->wmmat[5] >> GM_ALPHA_PREC_DIFF) - | 
 |                 (1 << GM_ALPHA_PREC_BITS), | 
 |             (gm->wmmat[5] >> GM_ALPHA_PREC_DIFF) - (1 << GM_ALPHA_PREC_BITS)); | 
 |       } | 
 |       AOM_FALLTHROUGH_INTENDED; | 
 |     case TRANSLATION: | 
 |       trans_bits = (gm->wmtype == TRANSLATION) | 
 |                        ? GM_ABS_TRANS_ONLY_BITS - !allow_hp | 
 |                        : GM_ABS_TRANS_BITS; | 
 |       trans_prec_diff = (gm->wmtype == TRANSLATION) | 
 |                             ? GM_TRANS_ONLY_PREC_DIFF + !allow_hp | 
 |                             : GM_TRANS_PREC_DIFF; | 
 |       params_cost += aom_count_signed_primitive_refsubexpfin( | 
 |           (1 << trans_bits) + 1, SUBEXPFIN_K, | 
 |           (ref_gm->wmmat[0] >> trans_prec_diff), | 
 |           (gm->wmmat[0] >> trans_prec_diff)); | 
 |       params_cost += aom_count_signed_primitive_refsubexpfin( | 
 |           (1 << trans_bits) + 1, SUBEXPFIN_K, | 
 |           (ref_gm->wmmat[1] >> trans_prec_diff), | 
 |           (gm->wmmat[1] >> trans_prec_diff)); | 
 |       AOM_FALLTHROUGH_INTENDED; | 
 |     case IDENTITY: break; | 
 |     default: assert(0); | 
 |   } | 
 |   return (params_cost << AV1_PROB_COST_SHIFT); | 
 | } | 
 |  | 
 | // For the given reference frame, computes the global motion parameters for | 
 | // different motion models and finds the best. | 
 | static AOM_INLINE void compute_global_motion_for_ref_frame( | 
 |     AV1_COMP *cpi, struct aom_internal_error_info *error_info, | 
 |     YV12_BUFFER_CONFIG *ref_buf[REF_FRAMES], int frame, | 
 |     MotionModel *motion_models, uint8_t *segment_map, const int segment_map_w, | 
 |     const int segment_map_h, const WarpedMotionParams *ref_params) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   MACROBLOCKD *const xd = &cpi->td.mb.e_mbd; | 
 |   int src_width = cpi->source->y_crop_width; | 
 |   int src_height = cpi->source->y_crop_height; | 
 |   int src_stride = cpi->source->y_stride; | 
 |   assert(ref_buf[frame] != NULL); | 
 |   int bit_depth = cpi->common.seq_params->bit_depth; | 
 |   GlobalMotionMethod global_motion_method = default_global_motion_method; | 
 |   int downsample_level = cpi->sf.gm_sf.downsample_level; | 
 |   int num_refinements = cpi->sf.gm_sf.num_refinement_steps; | 
 |   bool mem_alloc_failed = false; | 
 |  | 
 |   // Select the best model based on fractional error reduction. | 
 |   // By initializing this to erroradv_tr, the same logic which is used to | 
 |   // select the best model will automatically filter out any model which | 
 |   // doesn't meet the required quality threshold | 
 |   double best_erroradv = erroradv_tr; | 
 |   for (TransformationType model = FIRST_GLOBAL_TRANS_TYPE; | 
 |        model <= LAST_GLOBAL_TRANS_TYPE; ++model) { | 
 |     if (!aom_compute_global_motion(model, cpi->source, ref_buf[frame], | 
 |                                    bit_depth, global_motion_method, | 
 |                                    downsample_level, motion_models, | 
 |                                    RANSAC_NUM_MOTIONS, &mem_alloc_failed)) { | 
 |       if (mem_alloc_failed) { | 
 |         aom_internal_error(error_info, AOM_CODEC_MEM_ERROR, | 
 |                            "Failed to allocate global motion buffers"); | 
 |       } | 
 |       continue; | 
 |     } | 
 |  | 
 |     for (int i = 0; i < RANSAC_NUM_MOTIONS; ++i) { | 
 |       if (motion_models[i].num_inliers == 0) continue; | 
 |  | 
 |       WarpedMotionParams tmp_wm_params; | 
 |       av1_convert_model_to_params(motion_models[i].params, &tmp_wm_params); | 
 |  | 
 |       // Check that the generated model is warp-able | 
 |       if (!av1_get_shear_params(&tmp_wm_params)) continue; | 
 |  | 
 |       // Skip models that we won't use (IDENTITY or TRANSLATION) | 
 |       // | 
 |       // For IDENTITY type models, we don't need to evaluate anything because | 
 |       // all the following logic is effectively comparing the estimated model | 
 |       // to an identity model. | 
 |       // | 
 |       // For TRANSLATION type global motion models, gm_get_motion_vector() gives | 
 |       // the wrong motion vector (see comments in that function for details). | 
 |       // As translation-type models do not give much gain, we can avoid this bug | 
 |       // by never choosing a TRANSLATION type model | 
 |       if (tmp_wm_params.wmtype <= TRANSLATION) continue; | 
 |  | 
 |       av1_compute_feature_segmentation_map( | 
 |           segment_map, segment_map_w, segment_map_h, motion_models[i].inliers, | 
 |           motion_models[i].num_inliers); | 
 |  | 
 |       int64_t ref_frame_error = av1_segmented_frame_error( | 
 |           is_cur_buf_hbd(xd), xd->bd, ref_buf[frame]->y_buffer, | 
 |           ref_buf[frame]->y_stride, cpi->source->y_buffer, src_stride, | 
 |           src_width, src_height, segment_map, segment_map_w); | 
 |  | 
 |       if (ref_frame_error == 0) continue; | 
 |  | 
 |       const int64_t warp_error = av1_refine_integerized_param( | 
 |           &tmp_wm_params, tmp_wm_params.wmtype, is_cur_buf_hbd(xd), xd->bd, | 
 |           ref_buf[frame]->y_buffer, ref_buf[frame]->y_crop_width, | 
 |           ref_buf[frame]->y_crop_height, ref_buf[frame]->y_stride, | 
 |           cpi->source->y_buffer, src_width, src_height, src_stride, | 
 |           num_refinements, ref_frame_error, segment_map, segment_map_w); | 
 |  | 
 |       // av1_refine_integerized_param() can return a simpler model type than | 
 |       // its input, so re-check model type here | 
 |       if (tmp_wm_params.wmtype <= TRANSLATION) continue; | 
 |  | 
 |       double erroradvantage = (double)warp_error / ref_frame_error; | 
 |  | 
 |       // Check that the model signaling cost is not too high | 
 |       if (!av1_is_enough_erroradvantage( | 
 |               erroradvantage, | 
 |               gm_get_params_cost(&tmp_wm_params, ref_params, | 
 |                                  cm->features.allow_high_precision_mv))) { | 
 |         continue; | 
 |       } | 
 |  | 
 |       if (erroradvantage < best_erroradv) { | 
 |         best_erroradv = erroradvantage; | 
 |         // Save the wm_params modified by | 
 |         // av1_refine_integerized_param() rather than motion index to | 
 |         // avoid rerunning refine() below. | 
 |         memcpy(&(cm->global_motion[frame]), &tmp_wm_params, | 
 |                sizeof(WarpedMotionParams)); | 
 |       } | 
 |     } | 
 |   } | 
 | } | 
 |  | 
 | // Computes global motion for the given reference frame. | 
 | void av1_compute_gm_for_valid_ref_frames( | 
 |     AV1_COMP *cpi, struct aom_internal_error_info *error_info, | 
 |     YV12_BUFFER_CONFIG *ref_buf[REF_FRAMES], int frame, | 
 |     MotionModel *motion_models, uint8_t *segment_map, int segment_map_w, | 
 |     int segment_map_h) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   const WarpedMotionParams *ref_params = | 
 |       cm->prev_frame ? &cm->prev_frame->global_motion[frame] | 
 |                      : &default_warp_params; | 
 |  | 
 |   compute_global_motion_for_ref_frame(cpi, error_info, ref_buf, frame, | 
 |                                       motion_models, segment_map, segment_map_w, | 
 |                                       segment_map_h, ref_params); | 
 | } | 
 |  | 
 | // Loops over valid reference frames and computes global motion estimation. | 
 | static AOM_INLINE void compute_global_motion_for_references( | 
 |     AV1_COMP *cpi, YV12_BUFFER_CONFIG *ref_buf[REF_FRAMES], | 
 |     FrameDistPair reference_frame[REF_FRAMES - 1], int num_ref_frames, | 
 |     MotionModel *motion_models, uint8_t *segment_map, const int segment_map_w, | 
 |     const int segment_map_h) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   struct aom_internal_error_info *const error_info = | 
 |       cpi->td.mb.e_mbd.error_info; | 
 |   // Compute global motion w.r.t. reference frames starting from the nearest ref | 
 |   // frame in a given direction. | 
 |   for (int frame = 0; frame < num_ref_frames; frame++) { | 
 |     int ref_frame = reference_frame[frame].frame; | 
 |     av1_compute_gm_for_valid_ref_frames(cpi, error_info, ref_buf, ref_frame, | 
 |                                         motion_models, segment_map, | 
 |                                         segment_map_w, segment_map_h); | 
 |     // If global motion w.r.t. current ref frame is | 
 |     // INVALID/TRANSLATION/IDENTITY, skip the evaluation of global motion w.r.t | 
 |     // the remaining ref frames in that direction. | 
 |     if (cpi->sf.gm_sf.prune_ref_frame_for_gm_search && | 
 |         cm->global_motion[ref_frame].wmtype <= TRANSLATION) | 
 |       break; | 
 |   } | 
 | } | 
 |  | 
 | // Compares the distance in 'a' and 'b'. Returns 1 if the frame corresponding to | 
 | // 'a' is farther, -1 if the frame corresponding to 'b' is farther, 0 otherwise. | 
 | static int compare_distance(const void *a, const void *b) { | 
 |   const int diff = | 
 |       ((FrameDistPair *)a)->distance - ((FrameDistPair *)b)->distance; | 
 |   if (diff > 0) | 
 |     return 1; | 
 |   else if (diff < 0) | 
 |     return -1; | 
 |   return 0; | 
 | } | 
 |  | 
 | static int disable_gm_search_based_on_stats(const AV1_COMP *const cpi) { | 
 |   int is_gm_present = 1; | 
 |  | 
 |   // Check number of GM models only in GF groups with ARF frames. GM param | 
 |   // estimation is always done in the case of GF groups with no ARF frames (flat | 
 |   // gops) | 
 |   if (cpi->ppi->gf_group.arf_index > -1) { | 
 |     // valid_gm_model_found is initialized to INT32_MAX in the beginning of | 
 |     // every GF group. | 
 |     // Therefore, GM param estimation is always done for all frames until | 
 |     // at least 1 frame each of ARF_UPDATE, INTNL_ARF_UPDATE and LF_UPDATE are | 
 |     // encoded in a GF group For subsequent frames, GM param estimation is | 
 |     // disabled, if no valid models have been found in all the three update | 
 |     // types. | 
 |     is_gm_present = (cpi->ppi->valid_gm_model_found[ARF_UPDATE] != 0) || | 
 |                     (cpi->ppi->valid_gm_model_found[INTNL_ARF_UPDATE] != 0) || | 
 |                     (cpi->ppi->valid_gm_model_found[LF_UPDATE] != 0); | 
 |   } | 
 |   return !is_gm_present; | 
 | } | 
 |  | 
 | // Prunes reference frames for global motion estimation based on the speed | 
 | // feature 'gm_search_type'. | 
 | static int do_gm_search_logic(SPEED_FEATURES *const sf, int frame) { | 
 |   (void)frame; | 
 |   switch (sf->gm_sf.gm_search_type) { | 
 |     case GM_FULL_SEARCH: return 1; | 
 |     case GM_REDUCED_REF_SEARCH_SKIP_L2_L3: | 
 |       return !(frame == LAST2_FRAME || frame == LAST3_FRAME); | 
 |     case GM_REDUCED_REF_SEARCH_SKIP_L2_L3_ARF2: | 
 |       return !(frame == LAST2_FRAME || frame == LAST3_FRAME || | 
 |                (frame == ALTREF2_FRAME)); | 
 |     case GM_SEARCH_CLOSEST_REFS_ONLY: return 1; | 
 |     case GM_DISABLE_SEARCH: return 0; | 
 |     default: assert(0); | 
 |   } | 
 |   return 1; | 
 | } | 
 |  | 
 | // Populates valid reference frames in past/future directions in | 
 | // 'reference_frames' and their count in 'num_ref_frames'. | 
 | static AOM_INLINE void update_valid_ref_frames_for_gm( | 
 |     AV1_COMP *cpi, YV12_BUFFER_CONFIG *ref_buf[REF_FRAMES], | 
 |     FrameDistPair reference_frames[MAX_DIRECTIONS][REF_FRAMES - 1], | 
 |     int *num_ref_frames) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   int *num_past_ref_frames = &num_ref_frames[0]; | 
 |   int *num_future_ref_frames = &num_ref_frames[1]; | 
 |   const GF_GROUP *gf_group = &cpi->ppi->gf_group; | 
 |   int ref_pruning_enabled = is_frame_eligible_for_ref_pruning( | 
 |       gf_group, cpi->sf.inter_sf.selective_ref_frame, 1, cpi->gf_frame_index); | 
 |   int cur_frame_gm_disabled = 0; | 
 |   int pyr_lvl = cm->cur_frame->pyramid_level; | 
 |  | 
 |   if (cpi->sf.gm_sf.disable_gm_search_based_on_stats) { | 
 |     cur_frame_gm_disabled = disable_gm_search_based_on_stats(cpi); | 
 |   } | 
 |  | 
 |   for (int frame = ALTREF_FRAME; frame >= LAST_FRAME; --frame) { | 
 |     const MV_REFERENCE_FRAME ref_frame[2] = { frame, NONE_FRAME }; | 
 |     RefCntBuffer *buf = get_ref_frame_buf(cm, frame); | 
 |     const int ref_disabled = | 
 |         !(cpi->ref_frame_flags & av1_ref_frame_flag_list[frame]); | 
 |     ref_buf[frame] = NULL; | 
 |     cm->global_motion[frame] = default_warp_params; | 
 |     // Skip global motion estimation for invalid ref frames | 
 |     if (buf == NULL || | 
 |         (ref_disabled && cpi->sf.hl_sf.recode_loop != DISALLOW_RECODE)) { | 
 |       continue; | 
 |     } else { | 
 |       ref_buf[frame] = &buf->buf; | 
 |     } | 
 |  | 
 |     int prune_ref_frames = | 
 |         ref_pruning_enabled && | 
 |         prune_ref_by_selective_ref_frame(cpi, NULL, ref_frame, | 
 |                                          cm->cur_frame->ref_display_order_hint); | 
 |     int ref_pyr_lvl = buf->pyramid_level; | 
 |  | 
 |     if (ref_buf[frame]->y_crop_width == cpi->source->y_crop_width && | 
 |         ref_buf[frame]->y_crop_height == cpi->source->y_crop_height && | 
 |         do_gm_search_logic(&cpi->sf, frame) && !prune_ref_frames && | 
 |         ref_pyr_lvl <= pyr_lvl && !cur_frame_gm_disabled) { | 
 |       assert(ref_buf[frame] != NULL); | 
 |       const int relative_frame_dist = av1_encoder_get_relative_dist( | 
 |           buf->display_order_hint, cm->cur_frame->display_order_hint); | 
 |       // Populate past and future ref frames. | 
 |       // reference_frames[0][] indicates past direction and | 
 |       // reference_frames[1][] indicates future direction. | 
 |       if (relative_frame_dist == 0) { | 
 |         // Skip global motion estimation for frames at the same nominal instant. | 
 |         // This will generally be either a "real" frame coded against a | 
 |         // temporal filtered version, or a higher spatial layer coded against | 
 |         // a lower spatial layer. In either case, the optimal motion model will | 
 |         // be IDENTITY, so we don't need to search explicitly. | 
 |       } else if (relative_frame_dist < 0) { | 
 |         reference_frames[0][*num_past_ref_frames].distance = | 
 |             abs(relative_frame_dist); | 
 |         reference_frames[0][*num_past_ref_frames].frame = frame; | 
 |         (*num_past_ref_frames)++; | 
 |       } else { | 
 |         reference_frames[1][*num_future_ref_frames].distance = | 
 |             abs(relative_frame_dist); | 
 |         reference_frames[1][*num_future_ref_frames].frame = frame; | 
 |         (*num_future_ref_frames)++; | 
 |       } | 
 |     } | 
 |   } | 
 | } | 
 |  | 
 | // Initializes parameters used for computing global motion. | 
 | static AOM_INLINE void setup_global_motion_info_params(AV1_COMP *cpi) { | 
 |   GlobalMotionInfo *const gm_info = &cpi->gm_info; | 
 |   YV12_BUFFER_CONFIG *source = cpi->source; | 
 |  | 
 |   gm_info->segment_map_w = | 
 |       (source->y_crop_width + WARP_ERROR_BLOCK - 1) >> WARP_ERROR_BLOCK_LOG; | 
 |   gm_info->segment_map_h = | 
 |       (source->y_crop_height + WARP_ERROR_BLOCK - 1) >> WARP_ERROR_BLOCK_LOG; | 
 |  | 
 |   memset(gm_info->reference_frames, -1, | 
 |          sizeof(gm_info->reference_frames[0][0]) * MAX_DIRECTIONS * | 
 |              (REF_FRAMES - 1)); | 
 |   av1_zero(gm_info->num_ref_frames); | 
 |  | 
 |   // Populate ref_buf for valid ref frames in global motion | 
 |   update_valid_ref_frames_for_gm(cpi, gm_info->ref_buf, | 
 |                                  gm_info->reference_frames, | 
 |                                  gm_info->num_ref_frames); | 
 |  | 
 |   // Sort the past and future ref frames in the ascending order of their | 
 |   // distance from the current frame. reference_frames[0] => past direction | 
 |   // and reference_frames[1] => future direction. | 
 |   qsort(gm_info->reference_frames[0], gm_info->num_ref_frames[0], | 
 |         sizeof(gm_info->reference_frames[0][0]), compare_distance); | 
 |   qsort(gm_info->reference_frames[1], gm_info->num_ref_frames[1], | 
 |         sizeof(gm_info->reference_frames[1][0]), compare_distance); | 
 |  | 
 |   if (cpi->sf.gm_sf.gm_search_type == GM_SEARCH_CLOSEST_REFS_ONLY) { | 
 |     // Filter down to the nearest two ref frames. | 
 |     // Prefer one past and one future ref over two past refs, even if | 
 |     // the second past ref is closer | 
 |     if (gm_info->num_ref_frames[1] > 0) { | 
 |       gm_info->num_ref_frames[0] = AOMMIN(gm_info->num_ref_frames[0], 1); | 
 |       gm_info->num_ref_frames[1] = AOMMIN(gm_info->num_ref_frames[1], 1); | 
 |     } else { | 
 |       gm_info->num_ref_frames[0] = AOMMIN(gm_info->num_ref_frames[0], 2); | 
 |     } | 
 |   } | 
 | } | 
 |  | 
 | // Computes global motion w.r.t. valid reference frames. | 
 | static AOM_INLINE void global_motion_estimation(AV1_COMP *cpi) { | 
 |   GlobalMotionInfo *const gm_info = &cpi->gm_info; | 
 |   GlobalMotionData *gm_data = &cpi->td.gm_data; | 
 |  | 
 |   // Compute global motion w.r.t. past reference frames and future reference | 
 |   // frames | 
 |   for (int dir = 0; dir < MAX_DIRECTIONS; dir++) { | 
 |     if (gm_info->num_ref_frames[dir] > 0) | 
 |       compute_global_motion_for_references( | 
 |           cpi, gm_info->ref_buf, gm_info->reference_frames[dir], | 
 |           gm_info->num_ref_frames[dir], gm_data->motion_models, | 
 |           gm_data->segment_map, gm_info->segment_map_w, gm_info->segment_map_h); | 
 |   } | 
 | } | 
 |  | 
 | // Global motion estimation for the current frame is computed.This computation | 
 | // happens once per frame and the winner motion model parameters are stored in | 
 | // cm->cur_frame->global_motion. | 
 | void av1_compute_global_motion_facade(AV1_COMP *cpi) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   GlobalMotionInfo *const gm_info = &cpi->gm_info; | 
 |  | 
 |   if (cpi->oxcf.tool_cfg.enable_global_motion) { | 
 |     if (cpi->gf_frame_index == 0) { | 
 |       for (int i = 0; i < FRAME_UPDATE_TYPES; i++) { | 
 |         cpi->ppi->valid_gm_model_found[i] = INT32_MAX; | 
 | #if CONFIG_FPMT_TEST | 
 |         if (cpi->ppi->fpmt_unit_test_cfg == PARALLEL_SIMULATION_ENCODE) | 
 |           cpi->ppi->temp_valid_gm_model_found[i] = INT32_MAX; | 
 | #endif | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |   if (cpi->common.current_frame.frame_type == INTER_FRAME && cpi->source && | 
 |       cpi->oxcf.tool_cfg.enable_global_motion && !gm_info->search_done && | 
 |       cpi->sf.gm_sf.gm_search_type != GM_DISABLE_SEARCH) { | 
 |     setup_global_motion_info_params(cpi); | 
 |     // Terminate early if the total number of reference frames is zero. | 
 |     if (cpi->gm_info.num_ref_frames[0] || cpi->gm_info.num_ref_frames[1]) { | 
 |       gm_alloc_data(cpi, &cpi->td.gm_data); | 
 |       if (cpi->mt_info.num_workers > 1) | 
 |         av1_global_motion_estimation_mt(cpi); | 
 |       else | 
 |         global_motion_estimation(cpi); | 
 |       gm_dealloc_data(&cpi->td.gm_data); | 
 |       gm_info->search_done = 1; | 
 |     } | 
 |   } | 
 |   memcpy(cm->cur_frame->global_motion, cm->global_motion, | 
 |          sizeof(cm->cur_frame->global_motion)); | 
 | } |