| /* | 
 |  * Copyright (c) 2020, Alliance for Open Media. All rights reserved | 
 |  * | 
 |  * This source code is subject to the terms of the BSD 2 Clause License and | 
 |  * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
 |  * was not distributed with this source code in the LICENSE file, you can | 
 |  * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
 |  * Media Patent License 1.0 was not distributed with this source code in the | 
 |  * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
 |  */ | 
 |  | 
 | #include <ostream> | 
 | #include <set> | 
 | #include <vector> | 
 | #include "config/av1_rtcd.h" | 
 | #include "config/aom_dsp_rtcd.h" | 
 | #include "test/acm_random.h" | 
 | #include "aom_ports/aom_timer.h" | 
 | #include "third_party/googletest/src/googletest/include/gtest/gtest.h" | 
 |  | 
 | namespace { | 
 |  | 
 | // TODO(any): Remove following INTERP_FILTERS_ALL define, so that 12-tap filter | 
 | // is tested once 12-tap filter SIMD is done. | 
 | #undef INTERP_FILTERS_ALL | 
 | #define INTERP_FILTERS_ALL 4 | 
 |  | 
 | // All single reference convolve tests are parameterized on block size, | 
 | // bit-depth, and function to test. | 
 | // | 
 | // Note that parameterizing on these variables (and not other parameters) is | 
 | // a conscious decision - Jenkins needs some degree of parallelization to run | 
 | // the tests within the time limit, but if the number of parameters increases | 
 | // too much, the gtest framework does not handle it well (increased overhead per | 
 | // test, huge amount of output to stdout, etc.). | 
 | // | 
 | // Also note that the test suites must be named with the architecture, e.g., | 
 | // C, C_X, AVX2_X, ... The test suite that runs on Jenkins sometimes runs tests | 
 | // that cannot deal with intrinsics (e.g., the Valgrind tests on 32-bit x86 | 
 | // binaries) and will disable tests using a filter like | 
 | // --gtest_filter=-:SSE4_1.*. If the test suites are not named this way, the | 
 | // testing infrastructure will not selectively filter them properly. | 
 | class BlockSize { | 
 |  public: | 
 |   BlockSize(int w, int h) : width_(w), height_(h) {} | 
 |  | 
 |   int Width() const { return width_; } | 
 |   int Height() const { return height_; } | 
 |  | 
 |   bool operator<(const BlockSize &other) const { | 
 |     if (Width() == other.Width()) { | 
 |       return Height() < other.Height(); | 
 |     } | 
 |     return Width() < other.Width(); | 
 |   } | 
 |  | 
 |   bool operator==(const BlockSize &other) const { | 
 |     return Width() == other.Width() && Height() == other.Height(); | 
 |   } | 
 |  | 
 |  private: | 
 |   int width_; | 
 |   int height_; | 
 | }; | 
 |  | 
 | // Block size / bit depth / test function used to parameterize the tests. | 
 | template <typename T> | 
 | class TestParam { | 
 |  public: | 
 |   TestParam(const BlockSize &block, int bd, T test_func) | 
 |       : block_(block), bd_(bd), test_func_(test_func) {} | 
 |  | 
 |   const BlockSize &Block() const { return block_; } | 
 |   int BitDepth() const { return bd_; } | 
 |   T TestFunction() const { return test_func_; } | 
 |  | 
 |   bool operator==(const TestParam &other) const { | 
 |     return Block() == other.Block() && BitDepth() == other.BitDepth() && | 
 |            TestFunction() == other.TestFunction(); | 
 |   } | 
 |  | 
 |  private: | 
 |   BlockSize block_; | 
 |   int bd_; | 
 |   T test_func_; | 
 | }; | 
 |  | 
 | template <typename T> | 
 | std::ostream &operator<<(std::ostream &os, const TestParam<T> &test_arg) { | 
 |   return os << "TestParam { width:" << test_arg.Block().Width() | 
 |             << " height:" << test_arg.Block().Height() | 
 |             << " bd:" << test_arg.BitDepth() << " }"; | 
 | } | 
 |  | 
 | // Generate the list of all block widths / heights that need to be tested, | 
 | // includes chroma and luma sizes, for the given bit-depths. The test | 
 | // function is the same for all generated parameters. | 
 | template <typename T> | 
 | std::vector<TestParam<T>> GetTestParams(std::initializer_list<int> bit_depths, | 
 |                                         T test_func) { | 
 |   std::set<BlockSize> sizes; | 
 |   for (int b = BLOCK_4X4; b < BLOCK_SIZES_ALL; ++b) { | 
 |     const int w = block_size_wide[b]; | 
 |     const int h = block_size_high[b]; | 
 |     sizes.insert(BlockSize(w, h)); | 
 |     // Add in smaller chroma sizes as well. | 
 |     if (w == 4 || h == 4) { | 
 |       sizes.insert(BlockSize(w / 2, h / 2)); | 
 |     } | 
 |   } | 
 |   std::vector<TestParam<T>> result; | 
 |   for (const BlockSize &block : sizes) { | 
 |     for (int bd : bit_depths) { | 
 |       result.push_back(TestParam<T>(block, bd, test_func)); | 
 |     } | 
 |   } | 
 |   return result; | 
 | } | 
 |  | 
 | template <typename T> | 
 | std::vector<TestParam<T>> GetLowbdTestParams(T test_func) { | 
 |   return GetTestParams({ 8 }, test_func); | 
 | } | 
 |  | 
 | template <typename T> | 
 | ::testing::internal::ParamGenerator<TestParam<T>> BuildLowbdParams( | 
 |     T test_func) { | 
 |   return ::testing::ValuesIn(GetLowbdTestParams(test_func)); | 
 | } | 
 |  | 
 | // Test the test-parameters generators work as expected. | 
 | class AV1ConvolveParametersTest : public ::testing::Test {}; | 
 |  | 
 | TEST_F(AV1ConvolveParametersTest, GetLowbdTestParams) { | 
 |   auto v = GetLowbdTestParams(av1_convolve_x_sr_c); | 
 |   ASSERT_EQ(27U, v.size()); | 
 |   for (const auto &p : v) { | 
 |     ASSERT_EQ(8, p.BitDepth()); | 
 |     // Needed (instead of ASSERT_EQ(...) since gtest does not | 
 |     // have built in printing for arbitrary functions, which | 
 |     // causes a compilation error. | 
 |     bool same_fn = av1_convolve_x_sr_c == p.TestFunction(); | 
 |     ASSERT_TRUE(same_fn); | 
 |   } | 
 | } | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | template <typename T> | 
 | std::vector<TestParam<T>> GetHighbdTestParams(T test_func) { | 
 |   return GetTestParams({ 10, 12 }, test_func); | 
 | } | 
 |  | 
 | template <typename T> | 
 | ::testing::internal::ParamGenerator<TestParam<T>> BuildHighbdParams( | 
 |     T test_func) { | 
 |   return ::testing::ValuesIn(GetHighbdTestParams(test_func)); | 
 | } | 
 |  | 
 | TEST_F(AV1ConvolveParametersTest, GetHighbdTestParams) { | 
 |   auto v = GetHighbdTestParams(av1_highbd_convolve_x_sr_c); | 
 |   ASSERT_EQ(54U, v.size()); | 
 |   int num_10 = 0; | 
 |   int num_12 = 0; | 
 |   for (const auto &p : v) { | 
 |     ASSERT_TRUE(p.BitDepth() == 10 || p.BitDepth() == 12); | 
 |     bool same_fn = av1_highbd_convolve_x_sr_c == p.TestFunction(); | 
 |     ASSERT_TRUE(same_fn); | 
 |     if (p.BitDepth() == 10) { | 
 |       ++num_10; | 
 |     } else { | 
 |       ++num_12; | 
 |     } | 
 |   } | 
 |   ASSERT_EQ(num_10, num_12); | 
 | } | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | // AV1ConvolveTest is the base class that all convolve tests should derive from. | 
 | // It provides storage/methods for generating randomized buffers for both | 
 | // low bit-depth and high bit-depth, and setup/teardown methods for clearing | 
 | // system state. Implementors can get the bit-depth / block-size / | 
 | // test function by calling GetParam(). | 
 | template <typename T> | 
 | class AV1ConvolveTest : public ::testing::TestWithParam<TestParam<T>> { | 
 |  public: | 
 |   ~AV1ConvolveTest() override = default; | 
 |  | 
 |   void SetUp() override { | 
 |     rnd_.Reset(libaom_test::ACMRandom::DeterministicSeed()); | 
 |   } | 
 |  | 
 |   // Randomizes the 8-bit input buffer and returns a pointer to it. Note that | 
 |   // the pointer is safe to use with an 8-tap filter. The stride can range | 
 |   // from width to (width + kPadding). Also note that the pointer is to the | 
 |   // same memory location. | 
 |   static constexpr int kInputPadding = 12; | 
 |  | 
 |   // Get a pointer to a buffer with stride == width. Note that we must have | 
 |   // the test param passed in explicitly -- the gtest framework does not | 
 |   // support calling GetParam() within a templatized class. | 
 |   // Note that FirstRandomInput8 always returns the same pointer -- if two | 
 |   // inputs are needed, also use SecondRandomInput8. | 
 |   const uint8_t *FirstRandomInput8(const TestParam<T> ¶m) { | 
 |     // Note we can't call GetParam() directly -- gtest does not support | 
 |     // this for parameterized types. | 
 |     return RandomInput8(input8_1_, param); | 
 |   } | 
 |  | 
 |   const uint8_t *SecondRandomInput8(const TestParam<T> ¶m) { | 
 |     return RandomInput8(input8_2_, param); | 
 |   } | 
 |  | 
 |   // Some of the intrinsics perform writes in 32 byte chunks. Moreover, some | 
 |   // of the instrinsics assume that the stride is also a multiple of 32. | 
 |   // To satisfy these constraints and also remain simple, output buffer strides | 
 |   // are assumed MAX_SB_SIZE. | 
 |   static constexpr int kOutputStride = MAX_SB_SIZE; | 
 |  | 
 |   // Check that two 8-bit output buffers are identical. | 
 |   void AssertOutputBufferEq(const uint8_t *p1, const uint8_t *p2, int width, | 
 |                             int height) { | 
 |     ASSERT_TRUE(p1 != p2) << "Buffers must be at different memory locations"; | 
 |     for (int j = 0; j < height; ++j) { | 
 |       if (memcmp(p1, p2, sizeof(*p1) * width) == 0) { | 
 |         p1 += kOutputStride; | 
 |         p2 += kOutputStride; | 
 |         continue; | 
 |       } | 
 |       for (int i = 0; i < width; ++i) { | 
 |         ASSERT_EQ(p1[i], p2[i]) | 
 |             << width << "x" << height << " Pixel mismatch at (" << i << ", " | 
 |             << j << ")"; | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |   // Check that two 16-bit output buffers are identical. | 
 |   void AssertOutputBufferEq(const uint16_t *p1, const uint16_t *p2, int width, | 
 |                             int height) { | 
 |     ASSERT_TRUE(p1 != p2) << "Buffers must be in different memory locations"; | 
 |     for (int j = 0; j < height; ++j) { | 
 |       if (memcmp(p1, p2, sizeof(*p1) * width) == 0) { | 
 |         p1 += kOutputStride; | 
 |         p2 += kOutputStride; | 
 |         continue; | 
 |       } | 
 |       for (int i = 0; i < width; ++i) { | 
 |         ASSERT_EQ(p1[i], p2[i]) | 
 |             << width << "x" << height << " Pixel mismatch at (" << i << ", " | 
 |             << j << ")"; | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 |   // Note that the randomized values are capped by bit-depth. | 
 |   const uint16_t *FirstRandomInput16(const TestParam<T> ¶m) { | 
 |     return RandomInput16(input16_1_, param); | 
 |   } | 
 |  | 
 |   const uint16_t *SecondRandomInput16(const TestParam<T> ¶m) { | 
 |     return RandomInput16(input16_2_, param); | 
 |   } | 
 | #endif | 
 |  | 
 |  private: | 
 |   const uint8_t *RandomInput8(uint8_t *p, const TestParam<T> ¶m) { | 
 |     EXPECT_EQ(8, param.BitDepth()); | 
 |     EXPECT_GE(MAX_SB_SIZE, param.Block().Width()); | 
 |     EXPECT_GE(MAX_SB_SIZE, param.Block().Height()); | 
 |     const int padded_width = param.Block().Width() + kInputPadding; | 
 |     const int padded_height = param.Block().Height() + kInputPadding; | 
 |     Randomize(p, padded_width * padded_height); | 
 |     return p + (kInputPadding / 2) * padded_width + kInputPadding / 2; | 
 |   } | 
 |  | 
 |   void Randomize(uint8_t *p, int size) { | 
 |     for (int i = 0; i < size; ++i) { | 
 |       p[i] = rnd_.Rand8(); | 
 |     } | 
 |   } | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 |   const uint16_t *RandomInput16(uint16_t *p, const TestParam<T> ¶m) { | 
 |     // Check that this is only called with high bit-depths. | 
 |     EXPECT_TRUE(param.BitDepth() == 10 || param.BitDepth() == 12); | 
 |     EXPECT_GE(MAX_SB_SIZE, param.Block().Width()); | 
 |     EXPECT_GE(MAX_SB_SIZE, param.Block().Height()); | 
 |     const int padded_width = param.Block().Width() + kInputPadding; | 
 |     const int padded_height = param.Block().Height() + kInputPadding; | 
 |     Randomize(p, padded_width * padded_height, param.BitDepth()); | 
 |     return p + (kInputPadding / 2) * padded_width + kInputPadding / 2; | 
 |   } | 
 |  | 
 |   void Randomize(uint16_t *p, int size, int bit_depth) { | 
 |     for (int i = 0; i < size; ++i) { | 
 |       p[i] = rnd_.Rand16() & ((1 << bit_depth) - 1); | 
 |     } | 
 |   } | 
 | #endif | 
 |  | 
 |   static constexpr int kInputStride = MAX_SB_SIZE + kInputPadding; | 
 |  | 
 |   libaom_test::ACMRandom rnd_; | 
 |   // Statically allocate all the memory that is needed for the tests. Note | 
 |   // that we cannot allocate output memory here. It must use DECLARE_ALIGNED, | 
 |   // which is a C99 feature and interacts badly with C++ member variables. | 
 |   uint8_t input8_1_[kInputStride * kInputStride]; | 
 |   uint8_t input8_2_[kInputStride * kInputStride]; | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 |   uint16_t input16_1_[kInputStride * kInputStride]; | 
 |   uint16_t input16_2_[kInputStride * kInputStride]; | 
 | #endif | 
 | }; | 
 |  | 
 | //////////////////////////////////////////////////////// | 
 | // Single reference convolve-x functions (low bit-depth) | 
 | //////////////////////////////////////////////////////// | 
 | typedef void (*convolve_x_func)(const uint8_t *src, int src_stride, | 
 |                                 uint8_t *dst, int dst_stride, int w, int h, | 
 |                                 const InterpFilterParams *filter_params_x, | 
 |                                 const int subpel_x_qn, | 
 |                                 ConvolveParams *conv_params); | 
 |  | 
 | class AV1ConvolveXTest : public AV1ConvolveTest<convolve_x_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     for (int sub_x = 0; sub_x < 16; ++sub_x) { | 
 |       for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |            ++filter) { | 
 |         InterpFilter f = static_cast<InterpFilter>(filter); | 
 |         TestConvolve(sub_x, f); | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  public: | 
 |   void SpeedTest() { | 
 |     for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |          ++filter) { | 
 |       InterpFilter f = static_cast<InterpFilter>(filter); | 
 |       TestConvolveSpeed(f, 10000); | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const int sub_x, const InterpFilter filter) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(filter, width); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     av1_convolve_x_sr_c(input, width, reference, kOutputStride, width, height, | 
 |                         filter_params_x, sub_x, &conv_params1); | 
 |  | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     convolve_x_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     test_func(input, width, test, kOutputStride, width, height, filter_params_x, | 
 |               sub_x, &conv_params2); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(filter, width); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_convolve_x_sr_c(input, width, reference, kOutputStride, width, height, | 
 |                           filter_params_x, 0, &conv_params1); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     convolve_x_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_x, 0, &conv_params2); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveXTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveXTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveXTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveXTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveXTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_DOTPROD | 
 | INSTANTIATE_TEST_SUITE_P(NEON_DOTPROD, AV1ConvolveXTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_neon_dotprod)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_I8MM | 
 | INSTANTIATE_TEST_SUITE_P(NEON_I8MM, AV1ConvolveXTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_neon_i8mm)); | 
 | #endif | 
 |  | 
 | //////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-x IntraBC functions (low bit-depth) | 
 | //////////////////////////////////////////////////////////////// | 
 |  | 
 | class AV1ConvolveXIntraBCTest : public AV1ConvolveTest<convolve_x_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     // IntraBC functions only operate for subpel_x_qn = 8. | 
 |     constexpr int kSubX = 8; | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |  | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     // Use a stride different from width to avoid potential storing errors that | 
 |     // would go undetected. The input buffer is filled using a padding of 12, so | 
 |     // the stride can be anywhere between width and width + 12. | 
 |     av1_convolve_x_sr_intrabc_c(input, width + 2, reference, kOutputStride, | 
 |                                 width, height, filter_params_x, kSubX, | 
 |                                 &conv_params1); | 
 |  | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     convolve_x_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     test_func(input, width + 2, test, kOutputStride, width, height, | 
 |               filter_params_x, kSubX, &conv_params2); | 
 |  | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void SpeedTest() { | 
 |     constexpr int kNumIters = 10000; | 
 |     const InterpFilter filter = static_cast<InterpFilter>(BILINEAR); | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |  | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       av1_convolve_x_sr_intrabc_c(input, width, reference, kOutputStride, width, | 
 |                                   height, filter_params_x, 0, &conv_params1); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     convolve_x_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_x, 0, &conv_params2); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveXIntraBCTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveXIntraBCTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXIntraBCTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_intrabc_c)); | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveXIntraBCTest, | 
 |                          BuildLowbdParams(av1_convolve_x_sr_intrabc_neon)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | ///////////////////////////////////////////////////////// | 
 | // Single reference convolve-x functions (high bit-depth) | 
 | ///////////////////////////////////////////////////////// | 
 | typedef void (*highbd_convolve_x_func)( | 
 |     const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, int w, | 
 |     int h, const InterpFilterParams *filter_params_x, const int subpel_x_qn, | 
 |     ConvolveParams *conv_params, int bd); | 
 |  | 
 | class AV1ConvolveXHighbdTest : public AV1ConvolveTest<highbd_convolve_x_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     for (int sub_x = 0; sub_x < 16; ++sub_x) { | 
 |       for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |            ++filter) { | 
 |         InterpFilter f = static_cast<InterpFilter>(filter); | 
 |         TestConvolve(sub_x, f); | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  public: | 
 |   void SpeedTest() { | 
 |     for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |          ++filter) { | 
 |       InterpFilter f = static_cast<InterpFilter>(filter); | 
 |       TestConvolveSpeed(f, 10000); | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const int sub_x, const InterpFilter filter) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(filter, width); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     av1_highbd_convolve_x_sr_c(input, width, reference, kOutputStride, width, | 
 |                                height, filter_params_x, sub_x, &conv_params1, | 
 |                                bit_depth); | 
 |  | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height, | 
 |                               filter_params_x, sub_x, &conv_params2, bit_depth); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(filter, width); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_highbd_convolve_x_sr_c(input, width, reference, kOutputStride, width, | 
 |                                  height, filter_params_x, 0, &conv_params1, | 
 |                                  bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     highbd_convolve_x_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_x, 0, &conv_params2, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveXHighbdTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveXHighbdTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_x_sr_c)); | 
 |  | 
 | #if HAVE_SSSE3 | 
 | INSTANTIATE_TEST_SUITE_P(SSSE3, AV1ConvolveXHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_x_sr_ssse3)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveXHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_x_sr_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveXHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_x_sr_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_SVE2 | 
 | INSTANTIATE_TEST_SUITE_P(SVE2, AV1ConvolveXHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_x_sr_sve2)); | 
 | #endif | 
 |  | 
 | ///////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-x IntraBC functions (high bit-depth) | 
 | ///////////////////////////////////////////////////////////////// | 
 |  | 
 | class AV1ConvolveXHighbdIntraBCTest | 
 |     : public AV1ConvolveTest<highbd_convolve_x_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     // IntraBC functions only operate for subpel_x_qn = 8. | 
 |     constexpr int kSubX = 8; | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |  | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     // Use a stride different from width to avoid potential storing errors that | 
 |     // would go undetected. The input buffer is filled using a padding of 12, so | 
 |     // the stride can be anywhere between width and width + 12. | 
 |     av1_highbd_convolve_x_sr_intrabc_c( | 
 |         input, width + 2, reference, kOutputStride, width, height, | 
 |         filter_params_x, kSubX, &conv_params1, bit_depth); | 
 |  | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width + 2, test, kOutputStride, width, | 
 |                               height, filter_params_x, kSubX, &conv_params2, | 
 |                               bit_depth); | 
 |  | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void SpeedTest() { | 
 |     constexpr int kNumIters = 10000; | 
 |     const InterpFilter filter = static_cast<InterpFilter>(BILINEAR); | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |  | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       av1_highbd_convolve_x_sr_intrabc_c(input, width, reference, kOutputStride, | 
 |                                          width, height, filter_params_x, 0, | 
 |                                          &conv_params1, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     highbd_convolve_x_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_x, 0, &conv_params2, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveXHighbdIntraBCTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveXHighbdIntraBCTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXHighbdIntraBCTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_x_sr_intrabc_c)); | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1ConvolveXHighbdIntraBCTest, | 
 |     BuildHighbdParams(av1_highbd_convolve_x_sr_intrabc_neon)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | //////////////////////////////////////////////////////// | 
 | // Single reference convolve-y functions (low bit-depth) | 
 | //////////////////////////////////////////////////////// | 
 | typedef void (*convolve_y_func)(const uint8_t *src, int src_stride, | 
 |                                 uint8_t *dst, int dst_stride, int w, int h, | 
 |                                 const InterpFilterParams *filter_params_y, | 
 |                                 const int subpel_y_qn); | 
 |  | 
 | class AV1ConvolveYTest : public AV1ConvolveTest<convolve_y_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     for (int sub_y = 0; sub_y < 16; ++sub_y) { | 
 |       for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |            ++filter) { | 
 |         InterpFilter f = static_cast<InterpFilter>(filter); | 
 |         TestConvolve(sub_y, f); | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  public: | 
 |   void SpeedTest() { | 
 |     for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |          ++filter) { | 
 |       InterpFilter f = static_cast<InterpFilter>(filter); | 
 |       TestConvolveSpeed(f, 10000); | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const int sub_y, const InterpFilter filter) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(filter, height); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     av1_convolve_y_sr_c(input, width, reference, kOutputStride, width, height, | 
 |                         filter_params_y, sub_y); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height, | 
 |                               filter_params_y, sub_y); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(filter, height); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_convolve_y_sr_c(input, width, reference, kOutputStride, width, height, | 
 |                           filter_params_y, 0); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       GetParam().TestFunction()(input, width, test, kOutputStride, width, | 
 |                                 height, filter_params_y, 0); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveYTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveYTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveYTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveYTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveYTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_DOTPROD | 
 | INSTANTIATE_TEST_SUITE_P(NEON_DOTPROD, AV1ConvolveYTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_neon_dotprod)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_I8MM | 
 | INSTANTIATE_TEST_SUITE_P(NEON_I8MM, AV1ConvolveYTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_neon_i8mm)); | 
 | #endif | 
 |  | 
 | //////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-y IntraBC functions (low bit-depth) | 
 | //////////////////////////////////////////////////////////////// | 
 |  | 
 | class AV1ConvolveYIntraBCTest : public AV1ConvolveTest<convolve_y_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     // IntraBC functions only operate for subpel_y_qn = 8. | 
 |     constexpr int kSubY = 8; | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_y = &av1_intrabc_filter_params; | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     // Use a stride different from width to avoid potential storing errors that | 
 |     // would go undetected. The input buffer is filled using a padding of 12, so | 
 |     // the stride can be anywhere between width and width + 12. | 
 |     av1_convolve_y_sr_intrabc_c(input, width + 2, reference, kOutputStride, | 
 |                                 width, height, filter_params_y, kSubY); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width + 2, test, kOutputStride, width, | 
 |                               height, filter_params_y, kSubY); | 
 |  | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void SpeedTest() { | 
 |     constexpr int kNumIters = 10000; | 
 |     const InterpFilter filter = static_cast<InterpFilter>(BILINEAR); | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_y = &av1_intrabc_filter_params; | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       av1_convolve_y_sr_intrabc_c(input, width, reference, kOutputStride, width, | 
 |                                   height, filter_params_y, 0); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     convolve_y_func test_func = GetParam().TestFunction(); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_y, 0); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveYIntraBCTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveYIntraBCTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYIntraBCTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_intrabc_c)); | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveYIntraBCTest, | 
 |                          BuildLowbdParams(av1_convolve_y_sr_intrabc_neon)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | ///////////////////////////////////////////////////////// | 
 | // Single reference convolve-y functions (high bit-depth) | 
 | ///////////////////////////////////////////////////////// | 
 | typedef void (*highbd_convolve_y_func)( | 
 |     const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, int w, | 
 |     int h, const InterpFilterParams *filter_params_y, const int subpel_y_qn, | 
 |     int bd); | 
 |  | 
 | class AV1ConvolveYHighbdTest : public AV1ConvolveTest<highbd_convolve_y_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     for (int sub_y = 0; sub_y < 16; ++sub_y) { | 
 |       for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |            ++filter) { | 
 |         InterpFilter f = static_cast<InterpFilter>(filter); | 
 |         TestConvolve(sub_y, f); | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  public: | 
 |   void SpeedTest() { | 
 |     for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; | 
 |          ++filter) { | 
 |       InterpFilter f = static_cast<InterpFilter>(filter); | 
 |       TestConvolveSpeed(f, 10000); | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const int sub_y, const InterpFilter filter) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(filter, height); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     av1_highbd_convolve_y_sr_c(input, width, reference, kOutputStride, width, | 
 |                                height, filter_params_y, sub_y, bit_depth); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height, | 
 |                               filter_params_y, sub_y, bit_depth); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(filter, width); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_highbd_convolve_y_sr_c(input, width, reference, kOutputStride, width, | 
 |                                  height, filter_params_y, 0, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     highbd_convolve_y_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |  | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_y, 0, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveYHighbdTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveYHighbdTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_y_sr_c)); | 
 |  | 
 | #if HAVE_SSSE3 | 
 | INSTANTIATE_TEST_SUITE_P(SSSE3, AV1ConvolveYHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_y_sr_ssse3)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveYHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_y_sr_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveYHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_y_sr_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_SVE2 | 
 | INSTANTIATE_TEST_SUITE_P(SVE2, AV1ConvolveYHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_y_sr_sve2)); | 
 | #endif | 
 |  | 
 | ///////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-y IntraBC functions (high bit-depth) | 
 | ///////////////////////////////////////////////////////////////// | 
 |  | 
 | class AV1ConvolveYHighbdIntraBCTest | 
 |     : public AV1ConvolveTest<highbd_convolve_y_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     // IntraBC functions only operate for subpel_y_qn = 8. | 
 |     constexpr int kSubY = 8; | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_y = &av1_intrabc_filter_params; | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     // Use a stride different from width to avoid potential storing errors that | 
 |     // would go undetected. The input buffer is filled using a padding of 12, so | 
 |     // the stride can be anywhere between width and width + 12. | 
 |     av1_highbd_convolve_y_sr_intrabc_c(input, width + 2, reference, | 
 |                                        kOutputStride, width, height, | 
 |                                        filter_params_y, kSubY, bit_depth); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width + 2, test, kOutputStride, width, | 
 |                               height, filter_params_y, kSubY, bit_depth); | 
 |  | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void SpeedTest() { | 
 |     constexpr int kNumIters = 10000; | 
 |     const InterpFilter filter = static_cast<InterpFilter>(BILINEAR); | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(filter, width); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       av1_highbd_convolve_y_sr_intrabc_c(input, width, reference, kOutputStride, | 
 |                                          width, height, filter_params_y, 0, | 
 |                                          bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     highbd_convolve_y_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_y, 0, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, | 
 |            time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveYHighbdIntraBCTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1ConvolveYHighbdIntraBCTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYHighbdIntraBCTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_y_sr_intrabc_c)); | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1ConvolveYHighbdIntraBCTest, | 
 |     BuildHighbdParams(av1_highbd_convolve_y_sr_intrabc_neon)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | ////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-copy functions (low bit-depth) | 
 | ////////////////////////////////////////////////////////////// | 
 | typedef void (*convolve_copy_func)(const uint8_t *src, ptrdiff_t src_stride, | 
 |                                    uint8_t *dst, ptrdiff_t dst_stride, int w, | 
 |                                    int h); | 
 |  | 
 | class AV1ConvolveCopyTest : public AV1ConvolveTest<convolve_copy_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     aom_convolve_copy_c(input, width, reference, kOutputStride, width, height); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 | }; | 
 |  | 
 | // Note that even though these are AOM convolve functions, we are using the | 
 | // newer AV1 test framework. | 
 | TEST_P(AV1ConvolveCopyTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveCopyTest, | 
 |                          BuildLowbdParams(aom_convolve_copy_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveCopyTest, | 
 |                          BuildLowbdParams(aom_convolve_copy_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveCopyTest, | 
 |                          BuildLowbdParams(aom_convolve_copy_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveCopyTest, | 
 |                          BuildLowbdParams(aom_convolve_copy_neon)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | /////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-copy functions (high bit-depth) | 
 | /////////////////////////////////////////////////////////////// | 
 | typedef void (*highbd_convolve_copy_func)(const uint16_t *src, | 
 |                                           ptrdiff_t src_stride, uint16_t *dst, | 
 |                                           ptrdiff_t dst_stride, int w, int h); | 
 |  | 
 | class AV1ConvolveCopyHighbdTest | 
 |     : public AV1ConvolveTest<highbd_convolve_copy_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     aom_highbd_convolve_copy_c(input, width, reference, kOutputStride, width, | 
 |                                height); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveCopyHighbdTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveCopyHighbdTest, | 
 |                          BuildHighbdParams(aom_highbd_convolve_copy_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveCopyHighbdTest, | 
 |                          BuildHighbdParams(aom_highbd_convolve_copy_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveCopyHighbdTest, | 
 |                          BuildHighbdParams(aom_highbd_convolve_copy_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveCopyHighbdTest, | 
 |                          BuildHighbdParams(aom_highbd_convolve_copy_neon)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | ///////////////////////////////////////////////////////// | 
 | // Single reference convolve-2D functions (low bit-depth) | 
 | ///////////////////////////////////////////////////////// | 
 | typedef void (*convolve_2d_func)(const uint8_t *src, int src_stride, | 
 |                                  uint8_t *dst, int dst_stride, int w, int h, | 
 |                                  const InterpFilterParams *filter_params_x, | 
 |                                  const InterpFilterParams *filter_params_y, | 
 |                                  const int subpel_x_qn, const int subpel_y_qn, | 
 |                                  ConvolveParams *conv_params); | 
 |  | 
 | class AV1Convolve2DTest : public AV1ConvolveTest<convolve_2d_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     for (int sub_x = 0; sub_x < 16; ++sub_x) { | 
 |       for (int sub_y = 0; sub_y < 16; ++sub_y) { | 
 |         for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { | 
 |           for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { | 
 |             if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || | 
 |                 ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) | 
 |               continue; | 
 |             TestConvolve(static_cast<InterpFilter>(h_f), | 
 |                          static_cast<InterpFilter>(v_f), sub_x, sub_y); | 
 |           } | 
 |         } | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  public: | 
 |   void SpeedTest() { | 
 |     for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { | 
 |       for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { | 
 |         if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || | 
 |             ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) | 
 |           continue; | 
 |         TestConvolveSpeed(static_cast<InterpFilter>(h_f), | 
 |                           static_cast<InterpFilter>(v_f), 10000); | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, | 
 |                     const int sub_x, const int sub_y) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     av1_convolve_2d_sr_c(input, width, reference, kOutputStride, width, height, | 
 |                          filter_params_x, filter_params_y, sub_x, sub_y, | 
 |                          &conv_params1); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height, | 
 |                               filter_params_x, filter_params_y, sub_x, sub_y, | 
 |                               &conv_params2); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolveSpeed(const InterpFilter h_f, const InterpFilter v_f, | 
 |                          int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_convolve_2d_sr_c(input, width, reference, kOutputStride, width, | 
 |                            height, filter_params_x, filter_params_y, 0, 0, | 
 |                            &conv_params1); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       GetParam().TestFunction()(input, width, test, kOutputStride, width, | 
 |                                 height, filter_params_x, filter_params_y, 0, 0, | 
 |                                 &conv_params2); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("%d - %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", h_f, v_f, width, height, | 
 |            time1, time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1Convolve2DTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1Convolve2DTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1Convolve2DTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1Convolve2DTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_DOTPROD | 
 | INSTANTIATE_TEST_SUITE_P(NEON_DOTPROD, AV1Convolve2DTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_neon_dotprod)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_I8MM | 
 | INSTANTIATE_TEST_SUITE_P(NEON_I8MM, AV1Convolve2DTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_neon_i8mm)); | 
 | #endif | 
 |  | 
 | ///////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-2D IntraBC functions (low bit-depth) | 
 | ///////////////////////////////////////////////////////////////// | 
 |  | 
 | class AV1Convolve2DIntraBCTest : public AV1ConvolveTest<convolve_2d_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     // IntraBC functions only operate for subpel_x_qn = 8 and subpel_y_qn = 8. | 
 |     constexpr int kSubX = 8; | 
 |     constexpr int kSubY = 8; | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const InterpFilterParams *filter_params_y = &av1_intrabc_filter_params; | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     // Use a stride different from width to avoid potential storing errors that | 
 |     // would go undetected. The input buffer is filled using a padding of 12, so | 
 |     // the stride can be anywhere between width and width + 12. | 
 |     av1_convolve_2d_sr_intrabc_c(input, width + 2, reference, kOutputStride, | 
 |                                  width, height, filter_params_x, | 
 |                                  filter_params_y, kSubX, kSubY, &conv_params1); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     GetParam().TestFunction()(input, width + 2, test, kOutputStride, width, | 
 |                               height, filter_params_x, filter_params_y, kSubX, | 
 |                               kSubY, &conv_params2); | 
 |  | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void SpeedTest() { | 
 |     constexpr int kNumIters = 10000; | 
 |     const InterpFilter h_f = static_cast<InterpFilter>(BILINEAR); | 
 |     const InterpFilter v_f = static_cast<InterpFilter>(BILINEAR); | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const InterpFilterParams *filter_params_y = &av1_intrabc_filter_params; | 
 |     const uint8_t *input = FirstRandomInput8(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       av1_convolve_2d_sr_intrabc_c(input, width, reference, kOutputStride, | 
 |                                    width, height, filter_params_x, | 
 |                                    filter_params_y, 8, 8, &conv_params1); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     convolve_2d_func test_func = GetParam().TestFunction(); | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_x, filter_params_y, 8, 8, &conv_params2); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     printf("%d - %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", h_f, v_f, width, height, | 
 |            time1, time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DIntraBCTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1Convolve2DIntraBCTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DIntraBCTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_intrabc_c)); | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1Convolve2DIntraBCTest, | 
 |                          BuildLowbdParams(av1_convolve_2d_sr_intrabc_neon)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | ////////////////////////////////////////////////////////// | 
 | // Single reference convolve-2d functions (high bit-depth) | 
 | ////////////////////////////////////////////////////////// | 
 |  | 
 | typedef void (*highbd_convolve_2d_func)( | 
 |     const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, int w, | 
 |     int h, const InterpFilterParams *filter_params_x, | 
 |     const InterpFilterParams *filter_params_y, const int subpel_x_qn, | 
 |     const int subpel_y_qn, ConvolveParams *conv_params, int bd); | 
 |  | 
 | class AV1Convolve2DHighbdTest | 
 |     : public AV1ConvolveTest<highbd_convolve_2d_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     for (int sub_x = 0; sub_x < 16; ++sub_x) { | 
 |       for (int sub_y = 0; sub_y < 16; ++sub_y) { | 
 |         for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { | 
 |           for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { | 
 |             if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || | 
 |                 ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) | 
 |               continue; | 
 |             TestConvolve(static_cast<InterpFilter>(h_f), | 
 |                          static_cast<InterpFilter>(v_f), sub_x, sub_y); | 
 |           } | 
 |         } | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  public: | 
 |   void SpeedTest() { | 
 |     for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { | 
 |       for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { | 
 |         if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || | 
 |             ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) | 
 |           continue; | 
 |         TestConvolveSpeed(static_cast<InterpFilter>(h_f), | 
 |                           static_cast<InterpFilter>(v_f), 10000); | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, | 
 |                     const int sub_x, const int sub_y) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     av1_highbd_convolve_2d_sr_c(input, width, reference, kOutputStride, width, | 
 |                                 height, filter_params_x, filter_params_y, sub_x, | 
 |                                 sub_y, &conv_params1, bit_depth); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     GetParam().TestFunction()(input, width, test, kOutputStride, width, height, | 
 |                               filter_params_x, filter_params_y, sub_x, sub_y, | 
 |                               &conv_params2, bit_depth); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void TestConvolveSpeed(const InterpFilter h_f, const InterpFilter v_f, | 
 |                          int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_highbd_convolve_2d_sr_c(input, width, reference, kOutputStride, width, | 
 |                                   height, filter_params_x, filter_params_y, 0, | 
 |                                   0, &conv_params1, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       GetParam().TestFunction()(input, width, test, kOutputStride, width, | 
 |                                 height, filter_params_x, filter_params_y, 0, 0, | 
 |                                 &conv_params2, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("%d - %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", h_f, v_f, width, height, | 
 |            time1, time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DHighbdTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1Convolve2DHighbdTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_2d_sr_c)); | 
 |  | 
 | #if HAVE_SSSE3 | 
 | INSTANTIATE_TEST_SUITE_P(SSSE3, AV1Convolve2DHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_2d_sr_ssse3)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1Convolve2DHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_2d_sr_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1Convolve2DHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_2d_sr_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_SVE2 | 
 | INSTANTIATE_TEST_SUITE_P(SVE2, AV1Convolve2DHighbdTest, | 
 |                          BuildHighbdParams(av1_highbd_convolve_2d_sr_sve2)); | 
 | #endif | 
 |  | 
 | ////////////////////////////////////////////////////////////////// | 
 | // Single reference convolve-2d IntraBC functions (high bit-depth) | 
 | ////////////////////////////////////////////////////////////////// | 
 |  | 
 | class AV1Convolve2DHighbdIntraBCTest | 
 |     : public AV1ConvolveTest<highbd_convolve_2d_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     // IntraBC functions only operate for subpel_x_qn = 8 and subpel_y_qn = 8. | 
 |     constexpr int kSubX = 8; | 
 |     constexpr int kSubY = 8; | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = &av1_intrabc_filter_params; | 
 |     const InterpFilterParams *filter_params_y = &av1_intrabc_filter_params; | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     // Use a stride different from width to avoid potential storing errors that | 
 |     // would go undetected. The input buffer is filled using a padding of 12, so | 
 |     // the stride can be anywhere between width and width + 12. | 
 |     av1_highbd_convolve_2d_sr_intrabc_c(input, width + 2, reference, | 
 |                                         kOutputStride, width, height, | 
 |                                         filter_params_x, filter_params_y, kSubX, | 
 |                                         kSubY, &conv_params1, bit_depth); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, bit_depth); | 
 |     GetParam().TestFunction()(input, width + 2, test, kOutputStride, width, | 
 |                               height, filter_params_x, filter_params_y, kSubX, | 
 |                               kSubY, &conv_params2, bit_depth); | 
 |  | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void SpeedTest() { | 
 |     constexpr int kNumIters = 10000; | 
 |     const InterpFilter h_f = static_cast<InterpFilter>(BILINEAR); | 
 |     const InterpFilter v_f = static_cast<InterpFilter>(BILINEAR); | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     const uint16_t *input = FirstRandomInput16(GetParam()); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     ConvolveParams conv_params1 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       av1_highbd_convolve_2d_sr_intrabc_c( | 
 |           input, width, reference, kOutputStride, width, height, | 
 |           filter_params_x, filter_params_y, 0, 0, &conv_params1, bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     highbd_convolve_2d_func test_func = GetParam().TestFunction(); | 
 |     ConvolveParams conv_params2 = | 
 |         get_conv_params_no_round(0, 0, nullptr, 0, 0, 8); | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < kNumIters; ++i) { | 
 |       test_func(input, width, test, kOutputStride, width, height, | 
 |                 filter_params_x, filter_params_y, 0, 0, &conv_params2, | 
 |                 bit_depth); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     printf("%d - %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", h_f, v_f, width, height, | 
 |            time1, time2, time1 / time2); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DHighbdIntraBCTest, RunTest) { RunTest(); } | 
 |  | 
 | TEST_P(AV1Convolve2DHighbdIntraBCTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     C, AV1Convolve2DHighbdIntraBCTest, | 
 |     BuildHighbdParams(av1_highbd_convolve_2d_sr_intrabc_c)); | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1Convolve2DHighbdIntraBCTest, | 
 |     BuildHighbdParams(av1_highbd_convolve_2d_sr_intrabc_neon)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | ////////////////////////// | 
 | // Compound Convolve Tests | 
 | ////////////////////////// | 
 |  | 
 | // The compound functions do not work for chroma block sizes. Provide | 
 | // a function to generate test parameters for just luma block sizes. | 
 | template <typename T> | 
 | std::vector<TestParam<T>> GetLumaTestParams( | 
 |     std::initializer_list<int> bit_depths, T test_func) { | 
 |   std::set<BlockSize> sizes; | 
 |   for (int b = BLOCK_4X4; b < BLOCK_SIZES_ALL; ++b) { | 
 |     const int w = block_size_wide[b]; | 
 |     const int h = block_size_high[b]; | 
 |     sizes.insert(BlockSize(w, h)); | 
 |   } | 
 |   std::vector<TestParam<T>> result; | 
 |   for (int bit_depth : bit_depths) { | 
 |     for (const auto &block : sizes) { | 
 |       result.push_back(TestParam<T>(block, bit_depth, test_func)); | 
 |     } | 
 |   } | 
 |   return result; | 
 | } | 
 |  | 
 | template <typename T> | 
 | std::vector<TestParam<T>> GetLowbdLumaTestParams(T test_func) { | 
 |   return GetLumaTestParams({ 8 }, test_func); | 
 | } | 
 |  | 
 | template <typename T> | 
 | ::testing::internal::ParamGenerator<TestParam<T>> BuildLowbdLumaParams( | 
 |     T test_func) { | 
 |   return ::testing::ValuesIn(GetLowbdLumaTestParams(test_func)); | 
 | } | 
 |  | 
 | TEST_F(AV1ConvolveParametersTest, GetLowbdLumaTestParams) { | 
 |   auto v = GetLowbdLumaTestParams(av1_dist_wtd_convolve_x_c); | 
 |   ASSERT_EQ(22U, v.size()); | 
 |   for (const auto &e : v) { | 
 |     ASSERT_EQ(8, e.BitDepth()); | 
 |     bool same_fn = av1_dist_wtd_convolve_x_c == e.TestFunction(); | 
 |     ASSERT_TRUE(same_fn); | 
 |   } | 
 | } | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | template <typename T> | 
 | std::vector<TestParam<T>> GetHighbdLumaTestParams(T test_func) { | 
 |   return GetLumaTestParams({ 10, 12 }, test_func); | 
 | } | 
 |  | 
 | TEST_F(AV1ConvolveParametersTest, GetHighbdLumaTestParams) { | 
 |   auto v = GetHighbdLumaTestParams(av1_highbd_dist_wtd_convolve_x_c); | 
 |   ASSERT_EQ(44U, v.size()); | 
 |   int num_10 = 0; | 
 |   int num_12 = 0; | 
 |   for (const auto &e : v) { | 
 |     ASSERT_TRUE(10 == e.BitDepth() || 12 == e.BitDepth()); | 
 |     bool same_fn = av1_highbd_dist_wtd_convolve_x_c == e.TestFunction(); | 
 |     ASSERT_TRUE(same_fn); | 
 |     if (e.BitDepth() == 10) { | 
 |       ++num_10; | 
 |     } else { | 
 |       ++num_12; | 
 |     } | 
 |   } | 
 |   ASSERT_EQ(num_10, num_12); | 
 | } | 
 |  | 
 | template <typename T> | 
 | ::testing::internal::ParamGenerator<TestParam<T>> BuildHighbdLumaParams( | 
 |     T test_func) { | 
 |   return ::testing::ValuesIn(GetHighbdLumaTestParams(test_func)); | 
 | } | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | // Compound cases also need to test different frame offsets and weightings. | 
 | class CompoundParam { | 
 |  public: | 
 |   CompoundParam(bool use_dist_wtd_comp_avg, int fwd_offset, int bck_offset) | 
 |       : use_dist_wtd_comp_avg_(use_dist_wtd_comp_avg), fwd_offset_(fwd_offset), | 
 |         bck_offset_(bck_offset) {} | 
 |  | 
 |   bool UseDistWtdCompAvg() const { return use_dist_wtd_comp_avg_; } | 
 |   int FwdOffset() const { return fwd_offset_; } | 
 |   int BckOffset() const { return bck_offset_; } | 
 |  | 
 |  private: | 
 |   bool use_dist_wtd_comp_avg_; | 
 |   int fwd_offset_; | 
 |   int bck_offset_; | 
 | }; | 
 |  | 
 | std::vector<CompoundParam> GetCompoundParams() { | 
 |   std::vector<CompoundParam> result; | 
 |   result.push_back(CompoundParam(false, 0, 0)); | 
 |   for (int k = 0; k < 2; ++k) { | 
 |     for (int l = 0; l < 4; ++l) { | 
 |       result.push_back(CompoundParam(true, quant_dist_lookup_table[l][k], | 
 |                                      quant_dist_lookup_table[l][1 - k])); | 
 |     } | 
 |   } | 
 |   return result; | 
 | } | 
 |  | 
 | TEST_F(AV1ConvolveParametersTest, GetCompoundParams) { | 
 |   auto v = GetCompoundParams(); | 
 |   ASSERT_EQ(9U, v.size()); | 
 |   ASSERT_FALSE(v[0].UseDistWtdCompAvg()); | 
 |   for (size_t i = 1; i < v.size(); ++i) { | 
 |     ASSERT_TRUE(v[i].UseDistWtdCompAvg()); | 
 |   } | 
 | } | 
 |  | 
 | //////////////////////////////////////////////// | 
 | // Compound convolve-x functions (low bit-depth) | 
 | //////////////////////////////////////////////// | 
 |  | 
 | ConvolveParams GetConvolveParams(int do_average, CONV_BUF_TYPE *conv_buf, | 
 |                                  int width, int bit_depth, | 
 |                                  const CompoundParam &compound) { | 
 |   ConvolveParams conv_params = | 
 |       get_conv_params_no_round(do_average, 0, conv_buf, width, 1, bit_depth); | 
 |   conv_params.use_dist_wtd_comp_avg = compound.UseDistWtdCompAvg(); | 
 |   conv_params.fwd_offset = compound.FwdOffset(); | 
 |   conv_params.bck_offset = compound.BckOffset(); | 
 |   return conv_params; | 
 | } | 
 |  | 
 | class AV1ConvolveXCompoundTest : public AV1ConvolveTest<convolve_x_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     auto compound_params = GetCompoundParams(); | 
 |     for (int sub_pix = 0; sub_pix < 16; ++sub_pix) { | 
 |       for (int f = EIGHTTAP_REGULAR; f < INTERP_FILTERS_ALL; ++f) { | 
 |         for (const auto &c : compound_params) { | 
 |           TestConvolve(sub_pix, static_cast<InterpFilter>(f), c); | 
 |         } | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  protected: | 
 |   virtual const InterpFilterParams *FilterParams(InterpFilter f, | 
 |                                                  const BlockSize &block) const { | 
 |     return av1_get_interp_filter_params_with_block_size(f, block.Width()); | 
 |   } | 
 |  | 
 |   virtual convolve_x_func ReferenceFunc() const { | 
 |     return av1_dist_wtd_convolve_x_c; | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const int sub_pix, const InterpFilter filter, | 
 |                     const CompoundParam &compound) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const uint8_t *input1 = FirstRandomInput8(GetParam()); | 
 |     const uint8_t *input2 = SecondRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(ReferenceFunc(), input1, input2, reference, reference_conv_buf, | 
 |              compound, sub_pix, filter); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, | 
 |              compound, sub_pix, filter); | 
 |  | 
 |     AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void Convolve(convolve_x_func test_func, const uint8_t *src1, | 
 |                 const uint8_t *src2, uint8_t *dst, CONV_BUF_TYPE *conv_buf, | 
 |                 const CompoundParam &compound, const int sub_pix, | 
 |                 const InterpFilter filter) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const InterpFilterParams *filter_params = | 
 |         FilterParams(filter, GetParam().Block()); | 
 |  | 
 |     ConvolveParams conv_params = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); | 
 |     test_func(src1, width, dst, kOutputStride, width, height, filter_params, | 
 |               sub_pix, &conv_params); | 
 |  | 
 |     conv_params = GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); | 
 |     test_func(src2, width, dst, kOutputStride, width, height, filter_params, | 
 |               sub_pix, &conv_params); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveXCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_x_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveXCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_x_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveXCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_x_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveXCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_x_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_DOTPROD | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON_DOTPROD, AV1ConvolveXCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_x_neon_dotprod)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_I8MM | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON_I8MM, AV1ConvolveXCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_x_neon_i8mm)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | ///////////////////////////////////////////////// | 
 | // Compound convolve-x functions (high bit-depth) | 
 | ///////////////////////////////////////////////// | 
 | class AV1ConvolveXHighbdCompoundTest | 
 |     : public AV1ConvolveTest<highbd_convolve_x_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     auto compound_params = GetCompoundParams(); | 
 |     for (int sub_pix = 0; sub_pix < 16; ++sub_pix) { | 
 |       for (int f = EIGHTTAP_REGULAR; f < INTERP_FILTERS_ALL; ++f) { | 
 |         for (const auto &c : compound_params) { | 
 |           TestConvolve(sub_pix, static_cast<InterpFilter>(f), c); | 
 |         } | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  protected: | 
 |   virtual const InterpFilterParams *FilterParams(InterpFilter f, | 
 |                                                  const BlockSize &block) const { | 
 |     return av1_get_interp_filter_params_with_block_size(f, block.Width()); | 
 |   } | 
 |  | 
 |   virtual highbd_convolve_x_func ReferenceFunc() const { | 
 |     return av1_highbd_dist_wtd_convolve_x_c; | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const int sub_pix, const InterpFilter filter, | 
 |                     const CompoundParam &compound) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const uint16_t *input1 = FirstRandomInput16(GetParam()); | 
 |     const uint16_t *input2 = SecondRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(ReferenceFunc(), input1, input2, reference, reference_conv_buf, | 
 |              compound, sub_pix, filter); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, | 
 |              compound, sub_pix, filter); | 
 |  | 
 |     AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void Convolve(highbd_convolve_x_func test_func, const uint16_t *src1, | 
 |                 const uint16_t *src2, uint16_t *dst, CONV_BUF_TYPE *conv_buf, | 
 |                 const CompoundParam &compound, const int sub_pix, | 
 |                 const InterpFilter filter) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     const InterpFilterParams *filter_params = | 
 |         FilterParams(filter, GetParam().Block()); | 
 |     ConvolveParams conv_params = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, bit_depth, compound); | 
 |     test_func(src1, width, dst, kOutputStride, width, height, filter_params, | 
 |               sub_pix, &conv_params, bit_depth); | 
 |     conv_params = | 
 |         GetConvolveParams(1, conv_buf, kOutputStride, bit_depth, compound); | 
 |     test_func(src2, width, dst, kOutputStride, width, height, filter_params, | 
 |               sub_pix, &conv_params, bit_depth); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveXHighbdCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     C, AV1ConvolveXHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_c)); | 
 |  | 
 | #if HAVE_SSE4_1 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SSE4_1, AV1ConvolveXHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_sse4_1)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     AVX2, AV1ConvolveXHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1ConvolveXHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_SVE2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SVE2, AV1ConvolveXHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_sve2)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | //////////////////////////////////////////////// | 
 | // Compound convolve-y functions (low bit-depth) | 
 | //////////////////////////////////////////////// | 
 |  | 
 | // Note that the X and Y convolve functions have the same type signature and | 
 | // logic; they only differentiate the filter parameters and reference function. | 
 | class AV1ConvolveYCompoundTest : public AV1ConvolveXCompoundTest { | 
 |  protected: | 
 |   const InterpFilterParams *FilterParams( | 
 |       InterpFilter f, const BlockSize &block) const override { | 
 |     return av1_get_interp_filter_params_with_block_size(f, block.Height()); | 
 |   } | 
 |  | 
 |   convolve_x_func ReferenceFunc() const override { | 
 |     return av1_dist_wtd_convolve_y_c; | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveYCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_y_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveYCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_y_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveYCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_y_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveYCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_y_neon)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | ///////////////////////////////////////////////// | 
 | // Compound convolve-y functions (high bit-depth) | 
 | ///////////////////////////////////////////////// | 
 |  | 
 | // Again, the X and Y convolve functions have the same type signature and logic. | 
 | class AV1ConvolveYHighbdCompoundTest : public AV1ConvolveXHighbdCompoundTest { | 
 |   highbd_convolve_x_func ReferenceFunc() const override { | 
 |     return av1_highbd_dist_wtd_convolve_y_c; | 
 |   } | 
 |   const InterpFilterParams *FilterParams( | 
 |       InterpFilter f, const BlockSize &block) const override { | 
 |     return av1_get_interp_filter_params_with_block_size(f, block.Height()); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1ConvolveYHighbdCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     C, AV1ConvolveYHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_c)); | 
 |  | 
 | #if HAVE_SSE4_1 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SSE4_1, AV1ConvolveYHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_sse4_1)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     AVX2, AV1ConvolveYHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1ConvolveYHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_SVE2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SVE2, AV1ConvolveYHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_sve2)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | ////////////////////////////////////////////////////// | 
 | // Compound convolve-2d-copy functions (low bit-depth) | 
 | ////////////////////////////////////////////////////// | 
 | typedef void (*compound_conv_2d_copy_func)(const uint8_t *src, int src_stride, | 
 |                                            uint8_t *dst, int dst_stride, int w, | 
 |                                            int h, ConvolveParams *conv_params); | 
 |  | 
 | class AV1Convolve2DCopyCompoundTest | 
 |     : public AV1ConvolveTest<compound_conv_2d_copy_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     auto compound_params = GetCompoundParams(); | 
 |     for (const auto &compound : compound_params) { | 
 |       TestConvolve(compound); | 
 |     } | 
 |   } | 
 |   void SpeedTest() { | 
 |     for (const auto &compound : GetCompoundParams()) { | 
 |       TestConvolveSpeed(compound, 100000); | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const CompoundParam &compound) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |  | 
 |     const uint8_t *input1 = FirstRandomInput8(GetParam()); | 
 |     const uint8_t *input2 = SecondRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(av1_dist_wtd_convolve_2d_copy_c, input1, input2, reference, | 
 |              reference_conv_buf, compound); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, | 
 |              compound); | 
 |  | 
 |     AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void TestConvolveSpeed(const CompoundParam &compound, const int num_iters) { | 
 |     const int width = GetParam().Block().Width(); | 
 |     const int height = GetParam().Block().Height(); | 
 |  | 
 |     const uint8_t *src0 = FirstRandomInput8(GetParam()); | 
 |     const uint8_t *src1 = SecondRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, dst[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, conv_buf[MAX_SB_SQUARE]); | 
 |  | 
 |     const auto test_func = GetParam().TestFunction(); | 
 |  | 
 |     ConvolveParams conv_params_0 = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); | 
 |     ConvolveParams conv_params_1 = | 
 |         GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); | 
 |  | 
 |     aom_usec_timer timer; | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       av1_dist_wtd_convolve_2d_copy_c(src0, width, dst, kOutputStride, width, | 
 |                                       height, &conv_params_0); | 
 |       av1_dist_wtd_convolve_2d_copy_c(src1, width, dst, kOutputStride, width, | 
 |                                       height, &conv_params_1); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |  | 
 |     aom_usec_timer_start(&timer); | 
 |     for (int i = 0; i < num_iters; ++i) { | 
 |       test_func(src0, width, dst, kOutputStride, width, height, &conv_params_0); | 
 |       test_func(src1, width, dst, kOutputStride, width, height, &conv_params_1); | 
 |     } | 
 |     aom_usec_timer_mark(&timer); | 
 |     const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); | 
 |     printf("Dist Weighted: %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", | 
 |            compound.UseDistWtdCompAvg(), width, height, time1, time2, | 
 |            time1 / time2); | 
 |   } | 
 |  | 
 |   void Convolve(compound_conv_2d_copy_func test_func, const uint8_t *src1, | 
 |                 const uint8_t *src2, uint8_t *dst, uint16_t *conv_buf, | 
 |                 const CompoundParam &compound) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |     ConvolveParams conv_params = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); | 
 |     test_func(src1, width, dst, kOutputStride, width, height, &conv_params); | 
 |  | 
 |     conv_params = GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); | 
 |     test_func(src2, width, dst, kOutputStride, width, height, &conv_params); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DCopyCompoundTest, RunTest) { RunTest(); } | 
 | TEST_P(AV1Convolve2DCopyCompoundTest, DISABLED_SpeedTest) { SpeedTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DCopyCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_c)); | 
 |  | 
 | #if HAVE_SSE2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SSE2, AV1Convolve2DCopyCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_sse2)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     AVX2, AV1Convolve2DCopyCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1Convolve2DCopyCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_neon)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | /////////////////////////////////////////////////////// | 
 | // Compound convolve-2d-copy functions (high bit-depth) | 
 | /////////////////////////////////////////////////////// | 
 | typedef void (*highbd_compound_conv_2d_copy_func)(const uint16_t *src, | 
 |                                                   int src_stride, uint16_t *dst, | 
 |                                                   int dst_stride, int w, int h, | 
 |                                                   ConvolveParams *conv_params, | 
 |                                                   int bd); | 
 |  | 
 | class AV1Convolve2DCopyHighbdCompoundTest | 
 |     : public AV1ConvolveTest<highbd_compound_conv_2d_copy_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     auto compound_params = GetCompoundParams(); | 
 |     for (const auto &compound : compound_params) { | 
 |       TestConvolve(compound); | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const CompoundParam &compound) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |  | 
 |     const uint16_t *input1 = FirstRandomInput16(GetParam()); | 
 |     const uint16_t *input2 = SecondRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(av1_highbd_dist_wtd_convolve_2d_copy_c, input1, input2, reference, | 
 |              reference_conv_buf, compound); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, | 
 |              compound); | 
 |  | 
 |     AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |   void Convolve(highbd_compound_conv_2d_copy_func test_func, | 
 |                 const uint16_t *src1, const uint16_t *src2, uint16_t *dst, | 
 |                 uint16_t *conv_buf, const CompoundParam &compound) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |  | 
 |     ConvolveParams conv_params = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, bit_depth, compound); | 
 |     test_func(src1, width, dst, kOutputStride, width, height, &conv_params, | 
 |               bit_depth); | 
 |  | 
 |     conv_params = | 
 |         GetConvolveParams(1, conv_buf, kOutputStride, bit_depth, compound); | 
 |     test_func(src2, width, dst, kOutputStride, width, height, &conv_params, | 
 |               bit_depth); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DCopyHighbdCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     C, AV1Convolve2DCopyHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_c)); | 
 |  | 
 | #if HAVE_SSE4_1 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SSE4_1, AV1Convolve2DCopyHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_sse4_1)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     AVX2, AV1Convolve2DCopyHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1Convolve2DCopyHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_neon)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | ///////////////////////////////////////////////// | 
 | // Compound convolve-2d functions (low bit-depth) | 
 | ///////////////////////////////////////////////// | 
 |  | 
 | class AV1Convolve2DCompoundTest : public AV1ConvolveTest<convolve_2d_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     auto compound_params = GetCompoundParams(); | 
 |     for (int h_f = EIGHTTAP_REGULAR; h_f < INTERP_FILTERS_ALL; ++h_f) { | 
 |       for (int v_f = EIGHTTAP_REGULAR; v_f < INTERP_FILTERS_ALL; ++v_f) { | 
 |         for (int sub_x = 0; sub_x < 16; ++sub_x) { | 
 |           for (int sub_y = 0; sub_y < 16; ++sub_y) { | 
 |             for (const auto &compound : compound_params) { | 
 |               TestConvolve(static_cast<InterpFilter>(h_f), | 
 |                            static_cast<InterpFilter>(v_f), sub_x, sub_y, | 
 |                            compound); | 
 |             } | 
 |           } | 
 |         } | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, | 
 |                     const int sub_x, const int sub_y, | 
 |                     const CompoundParam &compound) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |  | 
 |     const uint8_t *input1 = FirstRandomInput8(GetParam()); | 
 |     const uint8_t *input2 = SecondRandomInput8(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(av1_dist_wtd_convolve_2d_c, input1, input2, reference, | 
 |              reference_conv_buf, compound, h_f, v_f, sub_x, sub_y); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, | 
 |              compound, h_f, v_f, sub_x, sub_y); | 
 |  | 
 |     AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void Convolve(convolve_2d_func test_func, const uint8_t *src1, | 
 |                 const uint8_t *src2, uint8_t *dst, uint16_t *conv_buf, | 
 |                 const CompoundParam &compound, const InterpFilter h_f, | 
 |                 const InterpFilter v_f, const int sub_x, const int sub_y) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     ConvolveParams conv_params = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); | 
 |  | 
 |     test_func(src1, width, dst, kOutputStride, width, height, filter_params_x, | 
 |               filter_params_y, sub_x, sub_y, &conv_params); | 
 |  | 
 |     conv_params = GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); | 
 |     test_func(src2, width, dst, kOutputStride, width, height, filter_params_x, | 
 |               filter_params_y, sub_x, sub_y, &conv_params); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_c)); | 
 |  | 
 | #if HAVE_SSSE3 | 
 | INSTANTIATE_TEST_SUITE_P(SSSE3, AV1Convolve2DCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_ssse3)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P(AVX2, AV1Convolve2DCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P(NEON, AV1Convolve2DCompoundTest, | 
 |                          BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_DOTPROD | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON_DOTPROD, AV1Convolve2DCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_neon_dotprod)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON_I8MM | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON_I8MM, AV1Convolve2DCompoundTest, | 
 |     BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_neon_i8mm)); | 
 | #endif | 
 |  | 
 | #if CONFIG_AV1_HIGHBITDEPTH | 
 | ////////////////////////////////////////////////// | 
 | // Compound convolve-2d functions (high bit-depth) | 
 | ////////////////////////////////////////////////// | 
 |  | 
 | class AV1Convolve2DHighbdCompoundTest | 
 |     : public AV1ConvolveTest<highbd_convolve_2d_func> { | 
 |  public: | 
 |   void RunTest() { | 
 |     auto compound_params = GetCompoundParams(); | 
 |     for (int h_f = EIGHTTAP_REGULAR; h_f < INTERP_FILTERS_ALL; ++h_f) { | 
 |       for (int v_f = EIGHTTAP_REGULAR; v_f < INTERP_FILTERS_ALL; ++v_f) { | 
 |         for (int sub_x = 0; sub_x < 16; ++sub_x) { | 
 |           for (int sub_y = 0; sub_y < 16; ++sub_y) { | 
 |             for (const auto &compound : compound_params) { | 
 |               TestConvolve(static_cast<InterpFilter>(h_f), | 
 |                            static_cast<InterpFilter>(v_f), sub_x, sub_y, | 
 |                            compound); | 
 |             } | 
 |           } | 
 |         } | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, | 
 |                     const int sub_x, const int sub_y, | 
 |                     const CompoundParam &compound) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |     const uint16_t *input1 = FirstRandomInput16(GetParam()); | 
 |     const uint16_t *input2 = SecondRandomInput16(GetParam()); | 
 |     DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(av1_highbd_dist_wtd_convolve_2d_c, input1, input2, reference, | 
 |              reference_conv_buf, compound, h_f, v_f, sub_x, sub_y); | 
 |  | 
 |     DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); | 
 |     DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); | 
 |     Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, | 
 |              compound, h_f, v_f, sub_x, sub_y); | 
 |  | 
 |     AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); | 
 |     AssertOutputBufferEq(reference, test, width, height); | 
 |   } | 
 |  | 
 |  private: | 
 |   void Convolve(highbd_convolve_2d_func test_func, const uint16_t *src1, | 
 |                 const uint16_t *src2, uint16_t *dst, uint16_t *conv_buf, | 
 |                 const CompoundParam &compound, const InterpFilter h_f, | 
 |                 const InterpFilter v_f, const int sub_x, const int sub_y) { | 
 |     const BlockSize &block = GetParam().Block(); | 
 |     const int width = block.Width(); | 
 |     const int height = block.Height(); | 
 |  | 
 |     const InterpFilterParams *filter_params_x = | 
 |         av1_get_interp_filter_params_with_block_size(h_f, width); | 
 |     const InterpFilterParams *filter_params_y = | 
 |         av1_get_interp_filter_params_with_block_size(v_f, height); | 
 |     const int bit_depth = GetParam().BitDepth(); | 
 |     ConvolveParams conv_params = | 
 |         GetConvolveParams(0, conv_buf, kOutputStride, bit_depth, compound); | 
 |     test_func(src1, width, dst, kOutputStride, width, height, filter_params_x, | 
 |               filter_params_y, sub_x, sub_y, &conv_params, bit_depth); | 
 |  | 
 |     conv_params = | 
 |         GetConvolveParams(1, conv_buf, kOutputStride, bit_depth, compound); | 
 |     test_func(src2, width, dst, kOutputStride, width, height, filter_params_x, | 
 |               filter_params_y, sub_x, sub_y, &conv_params, bit_depth); | 
 |   } | 
 | }; | 
 |  | 
 | TEST_P(AV1Convolve2DHighbdCompoundTest, RunTest) { RunTest(); } | 
 |  | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     C, AV1Convolve2DHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_c)); | 
 |  | 
 | #if HAVE_SSE4_1 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SSE4_1, AV1Convolve2DHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_sse4_1)); | 
 | #endif | 
 |  | 
 | #if HAVE_AVX2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     AVX2, AV1Convolve2DHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_avx2)); | 
 | #endif | 
 |  | 
 | #if HAVE_NEON | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     NEON, AV1Convolve2DHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_neon)); | 
 | #endif | 
 |  | 
 | #if HAVE_SVE2 | 
 | INSTANTIATE_TEST_SUITE_P( | 
 |     SVE2, AV1Convolve2DHighbdCompoundTest, | 
 |     BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_sve2)); | 
 | #endif | 
 |  | 
 | #endif  // CONFIG_AV1_HIGHBITDEPTH | 
 |  | 
 | }  // namespace |