| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 3-Clause Clear License |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear |
| * License was not distributed with this source code in the LICENSE file, you |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the |
| * Alliance for Open Media Patent License 1.0 was not distributed with this |
| * source code in the PATENTS file, you can obtain it at |
| * aomedia.org/license/patent-license/. |
| */ |
| |
| #include <limits.h> |
| #include <float.h> |
| #include <math.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <string.h> |
| |
| #include "av1/common/av1_common_int.h" |
| #include "config/aom_config.h" |
| #include "config/aom_dsp_rtcd.h" |
| |
| #if CONFIG_DENOISE |
| #include "aom_dsp/grain_table.h" |
| #include "aom_dsp/noise_util.h" |
| #include "aom_dsp/noise_model.h" |
| #endif |
| #include "aom_dsp/psnr.h" |
| #if CONFIG_INTERNAL_STATS |
| #include "aom_dsp/ssim.h" |
| #endif |
| #include "aom_ports/aom_timer.h" |
| #include "aom_ports/mem.h" |
| #include "aom_ports/system_state.h" |
| #include "aom_scale/aom_scale.h" |
| #if CONFIG_BITSTREAM_DEBUG |
| #include "aom_util/debug_util.h" |
| #endif // CONFIG_BITSTREAM_DEBUG |
| |
| #include "av1/common/alloccommon.h" |
| #include "av1/common/filter.h" |
| #include "av1/common/idct.h" |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| #include "av1/common/pred_common.h" |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| #include "av1/common/reconinter.h" |
| #include "av1/common/reconintra.h" |
| #include "av1/common/cfl.h" |
| #include "av1/common/resize.h" |
| #include "av1/common/tile_common.h" |
| #include "av1/common/tip.h" |
| |
| #include "av1/encoder/aq_complexity.h" |
| #include "av1/encoder/aq_cyclicrefresh.h" |
| #include "av1/encoder/aq_variance.h" |
| #include "av1/encoder/bitstream.h" |
| #include "av1/encoder/context_tree.h" |
| #include "av1/encoder/encodeframe.h" |
| #include "av1/encoder/encodemv.h" |
| #include "av1/encoder/encode_strategy.h" |
| #include "av1/encoder/encoder.h" |
| #include "av1/encoder/encoder_alloc.h" |
| #include "av1/encoder/encoder_utils.h" |
| #include "av1/encoder/encodetxb.h" |
| #include "av1/encoder/ethread.h" |
| #include "av1/encoder/firstpass.h" |
| #include "av1/encoder/hash_motion.h" |
| #include "av1/encoder/intra_mode_search.h" |
| #include "av1/encoder/mv_prec.h" |
| #include "av1/encoder/pass2_strategy.h" |
| #include "av1/encoder/pickcdef.h" |
| #include "av1/encoder/pickccso.h" |
| #include "av1/encoder/picklpf.h" |
| #include "av1/encoder/pickrst.h" |
| #include "av1/encoder/random.h" |
| #include "av1/encoder/ratectrl.h" |
| #include "av1/encoder/rc_utils.h" |
| #include "av1/encoder/rd.h" |
| #include "av1/encoder/rdopt.h" |
| #include "av1/encoder/reconinter_enc.h" |
| #include "av1/encoder/segmentation.h" |
| #include "av1/encoder/speed_features.h" |
| #include "av1/encoder/subgop.h" |
| #include "av1/encoder/superres_scale.h" |
| #include "av1/encoder/tpl_model.h" |
| |
| #if CONFIG_ML_PART_SPLIT |
| #include "av1/encoder/part_split_prune_tflite.h" |
| #endif // CONFIG_ML_PART_SPLIT |
| |
| #define DEFAULT_EXPLICIT_ORDER_HINT_BITS 7 |
| |
| #define DEF_MAX_DRL_REFMVS 4 |
| #if CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| #define DEF_MAX_DRL_REFBVS 4 |
| #endif // CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| #if CONFIG_ENTROPY_STATS |
| FRAME_COUNTS aggregate_fc; |
| #endif // CONFIG_ENTROPY_STATS |
| |
| // #define OUTPUT_YUV_REC |
| #ifdef OUTPUT_YUV_REC |
| FILE *yuv_rec_file; |
| #define FILE_NAME_LEN 100 |
| #endif |
| |
| static INLINE void Scale2Ratio(AOM_SCALING mode, int *hr, int *hs) { |
| switch (mode) { |
| case NORMAL: |
| *hr = 1; |
| *hs = 1; |
| break; |
| case FOURFIVE: |
| *hr = 4; |
| *hs = 5; |
| break; |
| case THREEFIVE: |
| *hr = 3; |
| *hs = 5; |
| break; |
| case THREEFOUR: |
| *hr = 3; |
| *hs = 4; |
| break; |
| case ONEFOUR: |
| *hr = 1; |
| *hs = 4; |
| break; |
| case ONEEIGHT: |
| *hr = 1; |
| *hs = 8; |
| break; |
| case ONETWO: |
| *hr = 1; |
| *hs = 2; |
| break; |
| default: |
| *hr = 1; |
| *hs = 1; |
| assert(0); |
| break; |
| } |
| } |
| |
| int av1_set_active_map(AV1_COMP *cpi, unsigned char *new_map_16x16, int rows, |
| int cols) { |
| const CommonModeInfoParams *const mi_params = &cpi->common.mi_params; |
| if (rows == mi_params->mb_rows && cols == mi_params->mb_cols) { |
| unsigned char *const active_map_8x8 = cpi->active_map.map; |
| const int mi_rows = mi_params->mi_rows; |
| const int mi_cols = mi_params->mi_cols; |
| const int row_scale = mi_size_high[BLOCK_16X16] == 2 ? 1 : 2; |
| const int col_scale = mi_size_wide[BLOCK_16X16] == 2 ? 1 : 2; |
| cpi->active_map.update = 1; |
| if (new_map_16x16) { |
| int r, c; |
| for (r = 0; r < mi_rows; ++r) { |
| for (c = 0; c < mi_cols; ++c) { |
| active_map_8x8[r * mi_cols + c] = |
| new_map_16x16[(r >> row_scale) * cols + (c >> col_scale)] |
| ? AM_SEGMENT_ID_ACTIVE |
| : AM_SEGMENT_ID_INACTIVE; |
| } |
| } |
| cpi->active_map.enabled = 1; |
| } else { |
| cpi->active_map.enabled = 0; |
| } |
| return 0; |
| } else { |
| return -1; |
| } |
| } |
| |
| int av1_get_active_map(AV1_COMP *cpi, unsigned char *new_map_16x16, int rows, |
| int cols) { |
| const CommonModeInfoParams *const mi_params = &cpi->common.mi_params; |
| if (rows == mi_params->mb_rows && cols == mi_params->mb_cols && |
| new_map_16x16) { |
| unsigned char *const seg_map_8x8 = cpi->enc_seg.map; |
| const int mi_rows = mi_params->mi_rows; |
| const int mi_cols = mi_params->mi_cols; |
| const int row_scale = mi_size_high[BLOCK_16X16] == 2 ? 1 : 2; |
| const int col_scale = mi_size_wide[BLOCK_16X16] == 2 ? 1 : 2; |
| |
| memset(new_map_16x16, !cpi->active_map.enabled, rows * cols); |
| if (cpi->active_map.enabled) { |
| int r, c; |
| for (r = 0; r < mi_rows; ++r) { |
| for (c = 0; c < mi_cols; ++c) { |
| // Cyclic refresh segments are considered active despite not having |
| // AM_SEGMENT_ID_ACTIVE |
| new_map_16x16[(r >> row_scale) * cols + (c >> col_scale)] |= |
| seg_map_8x8[r * mi_cols + c] != AM_SEGMENT_ID_INACTIVE; |
| } |
| } |
| } |
| return 0; |
| } else { |
| return -1; |
| } |
| } |
| |
| void av1_initialize_enc(void) { |
| av1_rtcd(); |
| aom_dsp_rtcd(); |
| aom_scale_rtcd(); |
| av1_init_intra_predictors(); |
| av1_init_me_luts(); |
| av1_rc_init_minq_luts(); |
| av1_init_wedge_masks(); |
| init_cwp_masks(); |
| } |
| |
| static void update_reference_segmentation_map(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| MB_MODE_INFO **mi_4x4_ptr = mi_params->mi_grid_base; |
| uint8_t *cache_ptr = cm->cur_frame->seg_map; |
| |
| for (int row = 0; row < mi_params->mi_rows; row++) { |
| MB_MODE_INFO **mi_4x4 = mi_4x4_ptr; |
| uint8_t *cache = cache_ptr; |
| for (int col = 0; col < mi_params->mi_cols; col++, mi_4x4++, cache++) |
| cache[0] = mi_4x4[0]->segment_id; |
| mi_4x4_ptr += mi_params->mi_stride; |
| cache_ptr += mi_params->mi_cols; |
| } |
| } |
| |
| void av1_new_framerate(AV1_COMP *cpi, double framerate) { |
| cpi->framerate = framerate < 0.1 ? 30 : framerate; |
| av1_rc_update_framerate(cpi, cpi->common.width, cpi->common.height); |
| } |
| |
| double av1_get_compression_ratio(const AV1_COMMON *const cm, |
| size_t encoded_frame_size) { |
| const int upscaled_width = cm->superres_upscaled_width; |
| const int height = cm->height; |
| const int luma_pic_size = upscaled_width * height; |
| const SequenceHeader *const seq_params = &cm->seq_params; |
| const BITSTREAM_PROFILE profile = seq_params->profile; |
| const int pic_size_profile_factor = |
| profile == PROFILE_0 ? 15 : (profile == PROFILE_1 ? 30 : 36); |
| encoded_frame_size = |
| (encoded_frame_size > 129 ? encoded_frame_size - 128 : 1); |
| const size_t uncompressed_frame_size = |
| (luma_pic_size * pic_size_profile_factor) >> 3; |
| return uncompressed_frame_size / (double)encoded_frame_size; |
| } |
| |
| static void update_frame_size(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| MACROBLOCKD *const xd = &cpi->td.mb.e_mbd; |
| |
| // We need to reallocate the context buffers here in case we need more mis. |
| if (av1_alloc_context_buffers(cm, cm->width, cm->height)) { |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate context buffers"); |
| } |
| av1_init_mi_buffers(&cm->mi_params); |
| |
| av1_init_macroblockd(cm, xd); |
| |
| if (!is_stat_generation_stage(cpi)) |
| alloc_context_buffers_ext(cm, &cpi->mbmi_ext_info); |
| |
| const BLOCK_SIZE sb_size = av1_select_sb_size(cpi); |
| if (!cpi->seq_params_locked) { |
| set_sb_size(cm, sb_size); |
| } else { |
| av1_set_frame_sb_size(cm, sb_size); |
| } |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| cpi->td.sb_size = cm->sb_size; |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| |
| av1_set_tile_info(cm, &cpi->oxcf.tile_cfg); |
| } |
| |
| static INLINE int does_level_match(int width, int height, double fps, |
| int lvl_width, int lvl_height, |
| double lvl_fps, int lvl_dim_mult) { |
| const int64_t lvl_luma_pels = lvl_width * lvl_height; |
| const double lvl_display_sample_rate = lvl_luma_pels * lvl_fps; |
| const int64_t luma_pels = width * height; |
| const double display_sample_rate = luma_pels * fps; |
| return luma_pels <= lvl_luma_pels && |
| display_sample_rate <= lvl_display_sample_rate && |
| width <= lvl_width * lvl_dim_mult && |
| height <= lvl_height * lvl_dim_mult; |
| } |
| |
| static void set_bitstream_level_tier(SequenceHeader *seq, AV1_COMMON *cm, |
| int width, int height, |
| double init_framerate) { |
| // TODO(any): This is a placeholder function that only addresses dimensions |
| // and max display sample rates. |
| // Need to add checks for max bit rate, max decoded luma sample rate, header |
| // rate, etc. that are not covered by this function. |
| AV1_LEVEL level = SEQ_LEVEL_MAX; |
| if (does_level_match(width, height, init_framerate, 512, 288, 30.0, 4)) { |
| level = SEQ_LEVEL_2_0; |
| } else if (does_level_match(width, height, init_framerate, 704, 396, 30.0, |
| 4)) { |
| level = SEQ_LEVEL_2_1; |
| } else if (does_level_match(width, height, init_framerate, 1088, 612, 30.0, |
| 4)) { |
| level = SEQ_LEVEL_3_0; |
| } else if (does_level_match(width, height, init_framerate, 1376, 774, 30.0, |
| 4)) { |
| level = SEQ_LEVEL_3_1; |
| } else if (does_level_match(width, height, init_framerate, 2048, 1152, 30.0, |
| 3)) { |
| level = SEQ_LEVEL_4_0; |
| } else if (does_level_match(width, height, init_framerate, 2048, 1152, 60.0, |
| 3)) { |
| level = SEQ_LEVEL_4_1; |
| } else if (does_level_match(width, height, init_framerate, 4096, 2176, 30.0, |
| 2)) { |
| level = SEQ_LEVEL_5_0; |
| } else if (does_level_match(width, height, init_framerate, 4096, 2176, 60.0, |
| 2)) { |
| level = SEQ_LEVEL_5_1; |
| } else if (does_level_match(width, height, init_framerate, 4096, 2176, 120.0, |
| 2)) { |
| level = SEQ_LEVEL_5_2; |
| } else if (does_level_match(width, height, init_framerate, 8192, 4352, 30.0, |
| 2)) { |
| level = SEQ_LEVEL_6_0; |
| } else if (does_level_match(width, height, init_framerate, 8192, 4352, 60.0, |
| 2)) { |
| level = SEQ_LEVEL_6_1; |
| } else if (does_level_match(width, height, init_framerate, 8192, 4352, 120.0, |
| 2)) { |
| level = SEQ_LEVEL_6_2; |
| } |
| |
| SequenceHeader *const seq_params = &cm->seq_params; |
| for (int i = 0; i < MAX_NUM_OPERATING_POINTS; ++i) { |
| seq->seq_level_idx[i] = level; |
| // Set the maximum parameters for bitrate and buffer size for this profile, |
| // level, and tier |
| seq_params->op_params[i].bitrate = av1_max_level_bitrate( |
| cm->seq_params.profile, seq->seq_level_idx[i], seq->tier[i]); |
| // Level with seq_level_idx = 31 returns a high "dummy" bitrate to pass the |
| // check |
| if (seq_params->op_params[i].bitrate == 0) |
| aom_internal_error( |
| &cm->error, AOM_CODEC_UNSUP_BITSTREAM, |
| "AV1 does not support this combination of profile, level, and tier."); |
| // Buffer size in bits/s is bitrate in bits/s * 1 s |
| seq_params->op_params[i].buffer_size = seq_params->op_params[i].bitrate; |
| } |
| } |
| |
| void av1_init_seq_coding_tools(SequenceHeader *seq, AV1_COMMON *cm, |
| const AV1EncoderConfig *oxcf) { |
| const FrameDimensionCfg *const frm_dim_cfg = &oxcf->frm_dim_cfg; |
| const ToolCfg *const tool_cfg = &oxcf->tool_cfg; |
| |
| seq->still_picture = |
| (tool_cfg->force_video_mode == 0) && (oxcf->input_cfg.limit == 1); |
| seq->reduced_still_picture_hdr = seq->still_picture; |
| seq->reduced_still_picture_hdr &= !tool_cfg->full_still_picture_hdr; |
| seq->force_screen_content_tools = 2; |
| seq->force_integer_mv = 2; |
| seq->order_hint_info.enable_order_hint = tool_cfg->enable_order_hint; |
| seq->frame_id_numbers_present_flag = |
| !(seq->still_picture && seq->reduced_still_picture_hdr) && |
| !oxcf->tile_cfg.enable_large_scale_tile && tool_cfg->error_resilient_mode; |
| if (seq->still_picture && seq->reduced_still_picture_hdr) { |
| seq->order_hint_info.enable_order_hint = 0; |
| seq->force_screen_content_tools = 2; |
| seq->force_integer_mv = 2; |
| } |
| seq->order_hint_info.order_hint_bits_minus_1 = |
| seq->order_hint_info.enable_order_hint |
| ? DEFAULT_EXPLICIT_ORDER_HINT_BITS - 1 |
| : -1; |
| seq->explicit_ref_frame_map = oxcf->ref_frm_cfg.explicit_ref_frame_map; |
| // Set 0 for multi-layer coding |
| seq->enable_frame_output_order = |
| oxcf->ref_frm_cfg.enable_frame_output_order && |
| seq->order_hint_info.enable_order_hint; |
| seq->max_reference_frames = oxcf->ref_frm_cfg.max_reference_frames; |
| #if CONFIG_SAME_REF_COMPOUND |
| seq->num_same_ref_compound = SAME_REF_COMPOUND_PRUNE; |
| #endif // CONFIG_SAME_REF_COMPOUND |
| |
| seq->max_frame_width = frm_dim_cfg->forced_max_frame_width |
| ? frm_dim_cfg->forced_max_frame_width |
| : frm_dim_cfg->width; |
| seq->max_frame_height = frm_dim_cfg->forced_max_frame_height |
| ? frm_dim_cfg->forced_max_frame_height |
| : frm_dim_cfg->height; |
| seq->num_bits_width = |
| (seq->max_frame_width > 1) ? get_msb(seq->max_frame_width - 1) + 1 : 1; |
| seq->num_bits_height = |
| (seq->max_frame_height > 1) ? get_msb(seq->max_frame_height - 1) + 1 : 1; |
| assert(seq->num_bits_width <= 16); |
| assert(seq->num_bits_height <= 16); |
| |
| seq->frame_id_length = FRAME_ID_LENGTH; |
| seq->delta_frame_id_length = DELTA_FRAME_ID_LENGTH; |
| |
| seq->order_hint_info.enable_ref_frame_mvs = tool_cfg->ref_frame_mvs_present; |
| seq->order_hint_info.enable_ref_frame_mvs &= |
| seq->order_hint_info.enable_order_hint; |
| seq->enable_superres = oxcf->superres_cfg.enable_superres; |
| seq->enable_cdef = tool_cfg->enable_cdef; |
| seq->enable_restoration = tool_cfg->enable_restoration; |
| seq->enable_ccso = tool_cfg->enable_ccso; |
| #if CONFIG_LF_SUB_PU |
| seq->enable_lf_sub_pu = tool_cfg->enable_lf_sub_pu; |
| #endif // CONFIG_LF_SUB_PU |
| seq->enable_opfl_refine = tool_cfg->enable_opfl_refine; |
| #if CONFIG_AFFINE_REFINEMENT |
| seq->enable_affine_refine = tool_cfg->enable_affine_refine; |
| #endif // CONFIG_AFFINE_REFINEMENT |
| seq->enable_tip = tool_cfg->enable_tip; |
| seq->enable_tip_hole_fill = seq->enable_tip; |
| #if CONFIG_TIP_IMPLICIT_QUANT |
| seq->enable_tip_explicit_qp = 0; |
| #endif // CONFIG_TIP_IMPLICIT_QUANT |
| #if CONFIG_BAWP |
| seq->enable_bawp = tool_cfg->enable_bawp; |
| #endif // CONFIG_BAWP |
| seq->enable_cwp = tool_cfg->enable_cwp; |
| #if CONFIG_D071_IMP_MSK_BLD |
| seq->enable_imp_msk_bld = tool_cfg->enable_imp_msk_bld; |
| #endif // CONFIG_D071_IMP_MSK_BLD |
| seq->seq_enabled_motion_modes = |
| oxcf->motion_mode_cfg.seq_enabled_motion_modes; |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| seq->enable_ext_partitions = oxcf->part_cfg.enable_ext_partitions; |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| seq->enable_masked_compound = oxcf->comp_type_cfg.enable_masked_comp; |
| seq->enable_intra_edge_filter = oxcf->intra_mode_cfg.enable_intra_edge_filter; |
| seq->enable_filter_intra = oxcf->intra_mode_cfg.enable_filter_intra; |
| |
| seq->enable_sdp = oxcf->part_cfg.enable_sdp; |
| seq->enable_mrls = oxcf->intra_mode_cfg.enable_mrls; |
| seq->enable_fsc = oxcf->intra_mode_cfg.enable_fsc; |
| seq->enable_orip = oxcf->intra_mode_cfg.enable_orip; |
| #if CONFIG_IDIF |
| seq->enable_idif = oxcf->intra_mode_cfg.enable_idif; |
| #endif // CONFIG_IDIF |
| seq->enable_ist = oxcf->txfm_cfg.enable_ist; |
| seq->enable_inter_ist = oxcf->txfm_cfg.enable_inter_ist; |
| #if CONFIG_INTER_DDT |
| seq->enable_inter_ddt = oxcf->txfm_cfg.enable_inter_ddt; |
| #endif // CONFIG_INTER_DDT |
| seq->enable_cctx = oxcf->txfm_cfg.enable_cctx; |
| seq->enable_ibp = oxcf->intra_mode_cfg.enable_ibp; |
| seq->enable_adaptive_mvd = tool_cfg->enable_adaptive_mvd; |
| seq->enable_flex_mvres = tool_cfg->enable_flex_mvres; |
| seq->cfl_ds_filter_index = tool_cfg->select_cfl_ds_filter; |
| seq->enable_joint_mvd = tool_cfg->enable_joint_mvd; |
| #if CONFIG_REFINEMV |
| seq->enable_refinemv = tool_cfg->enable_refinemv; |
| #endif // CONFIG_REFINEMV |
| #if CONFIG_DERIVED_MVD_SIGN |
| seq->enable_mvd_sign_derive = tool_cfg->enable_mvd_sign_derive; |
| #endif // CONFIG_DERIVED_MVD_SIGN |
| set_bitstream_level_tier(seq, cm, frm_dim_cfg->width, frm_dim_cfg->height, |
| oxcf->input_cfg.init_framerate); |
| |
| if (seq->operating_points_cnt_minus_1 == 0) { |
| seq->operating_point_idc[0] = 0; |
| } else { |
| // Set operating_point_idc[] such that the i=0 point corresponds to the |
| // highest quality operating point (all layers), and subsequent |
| // operarting points (i > 0) are lower quality corresponding to |
| // skip decoding enhancement layers (temporal first). |
| int i = 0; |
| assert(seq->operating_points_cnt_minus_1 == |
| (int)(cm->number_spatial_layers * cm->number_temporal_layers - 1)); |
| for (unsigned int sl = 0; sl < cm->number_spatial_layers; sl++) { |
| for (unsigned int tl = 0; tl < cm->number_temporal_layers; tl++) { |
| seq->operating_point_idc[i] = |
| (~(~0u << (cm->number_spatial_layers - sl)) << 8) | |
| ~(~0u << (cm->number_temporal_layers - tl)); |
| i++; |
| } |
| } |
| } |
| |
| const int is_360p_or_larger = |
| AOMMIN(seq->max_frame_width, seq->max_frame_height) >= 360; |
| const int is_720p_or_larger = |
| AOMMIN(seq->max_frame_width, seq->max_frame_height) >= 720; |
| if (!is_360p_or_larger) { |
| seq->base_y_dc_delta_q = -7; |
| seq->base_uv_dc_delta_q = -6; |
| } else if (!is_720p_or_larger) { |
| seq->base_y_dc_delta_q = -5; |
| seq->base_uv_dc_delta_q = -4; |
| } else { |
| seq->base_y_dc_delta_q = -4; |
| seq->base_uv_dc_delta_q = -3; |
| } |
| |
| seq->enable_refmvbank = tool_cfg->enable_refmvbank; |
| seq->enable_parity_hiding = tool_cfg->enable_parity_hiding; |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| // TODO(rachelbarker): Check if cpi->sf.gm_sf.gm_search_type is set by this |
| // point, and set to 0 if cpi->sf.gm_sf.gm_search_type == GM_DISABLE_SEARCH |
| // if possible |
| seq->enable_global_motion = |
| tool_cfg->enable_global_motion && !seq->reduced_still_picture_hdr; |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| #if CONFIG_REFRESH_FLAG |
| seq->enable_short_refresh_frame_flags = |
| tool_cfg->enable_short_refresh_frame_flags; |
| #endif // CONFIG_REFRESH_FLAG |
| } |
| |
| static void init_config(struct AV1_COMP *cpi, AV1EncoderConfig *oxcf) { |
| AV1_COMMON *const cm = &cpi->common; |
| SequenceHeader *const seq_params = &cm->seq_params; |
| ResizePendingParams *resize_pending_params = &cpi->resize_pending_params; |
| const DecoderModelCfg *const dec_model_cfg = &oxcf->dec_model_cfg; |
| const ColorCfg *const color_cfg = &oxcf->color_cfg; |
| cpi->oxcf = *oxcf; |
| cpi->framerate = oxcf->input_cfg.init_framerate; |
| |
| seq_params->profile = oxcf->profile; |
| seq_params->bit_depth = oxcf->tool_cfg.bit_depth; |
| seq_params->color_primaries = color_cfg->color_primaries; |
| seq_params->transfer_characteristics = color_cfg->transfer_characteristics; |
| seq_params->matrix_coefficients = color_cfg->matrix_coefficients; |
| seq_params->monochrome = oxcf->tool_cfg.enable_monochrome; |
| seq_params->chroma_sample_position = color_cfg->chroma_sample_position; |
| seq_params->color_range = color_cfg->color_range; |
| seq_params->timing_info_present = dec_model_cfg->timing_info_present; |
| seq_params->timing_info.num_units_in_display_tick = |
| dec_model_cfg->timing_info.num_units_in_display_tick; |
| seq_params->timing_info.time_scale = dec_model_cfg->timing_info.time_scale; |
| seq_params->timing_info.equal_picture_interval = |
| dec_model_cfg->timing_info.equal_picture_interval; |
| seq_params->timing_info.num_ticks_per_picture = |
| dec_model_cfg->timing_info.num_ticks_per_picture; |
| |
| seq_params->display_model_info_present_flag = |
| dec_model_cfg->display_model_info_present_flag; |
| seq_params->decoder_model_info_present_flag = |
| dec_model_cfg->decoder_model_info_present_flag; |
| if (dec_model_cfg->decoder_model_info_present_flag) { |
| // set the decoder model parameters in schedule mode |
| seq_params->decoder_model_info.num_units_in_decoding_tick = |
| dec_model_cfg->num_units_in_decoding_tick; |
| cm->buffer_removal_time_present = 1; |
| av1_set_aom_dec_model_info(&seq_params->decoder_model_info); |
| av1_set_dec_model_op_parameters(&seq_params->op_params[0]); |
| } else if (seq_params->timing_info_present && |
| seq_params->timing_info.equal_picture_interval && |
| !seq_params->decoder_model_info_present_flag) { |
| // set the decoder model parameters in resource availability mode |
| av1_set_resource_availability_parameters(&seq_params->op_params[0]); |
| } else { |
| seq_params->op_params[0].initial_display_delay = |
| 10; // Default value (not signaled) |
| } |
| |
| if (seq_params->monochrome) { |
| seq_params->subsampling_x = 1; |
| seq_params->subsampling_y = 1; |
| } else if (seq_params->color_primaries == AOM_CICP_CP_BT_709 && |
| seq_params->transfer_characteristics == AOM_CICP_TC_SRGB && |
| seq_params->matrix_coefficients == AOM_CICP_MC_IDENTITY) { |
| seq_params->subsampling_x = 0; |
| seq_params->subsampling_y = 0; |
| } else { |
| if (seq_params->profile == 0) { |
| seq_params->subsampling_x = 1; |
| seq_params->subsampling_y = 1; |
| } else if (seq_params->profile == 1) { |
| seq_params->subsampling_x = 0; |
| seq_params->subsampling_y = 0; |
| } else { |
| if (seq_params->bit_depth == AOM_BITS_12) { |
| seq_params->subsampling_x = oxcf->input_cfg.chroma_subsampling_x; |
| seq_params->subsampling_y = oxcf->input_cfg.chroma_subsampling_y; |
| } else { |
| seq_params->subsampling_x = 1; |
| seq_params->subsampling_y = 0; |
| } |
| } |
| } |
| |
| cm->width = oxcf->frm_dim_cfg.width; |
| cm->height = oxcf->frm_dim_cfg.height; |
| cm->superres_upscaled_width = oxcf->frm_dim_cfg.width; |
| cm->superres_upscaled_height = oxcf->frm_dim_cfg.height; |
| // set sb size before allocations |
| const BLOCK_SIZE sb_size = av1_select_sb_size(cpi); |
| set_sb_size(cm, sb_size); |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| cpi->td.sb_size = cm->sb_size; |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| alloc_compressor_data(cpi); |
| |
| av1_update_film_grain_parameters(cpi, oxcf); |
| |
| // Single thread case: use counts in common. |
| cpi->td.counts = &cpi->counts; |
| |
| // Set init SVC parameters. |
| cm->number_spatial_layers = 1; |
| cm->number_temporal_layers = 1; |
| cm->spatial_layer_id = 0; |
| cm->temporal_layer_id = 0; |
| |
| // change includes all joint functionality |
| av1_change_config(cpi, oxcf); |
| |
| cm->ref_frame_flags = 0; |
| |
| // Reset resize pending flags |
| resize_pending_params->width = 0; |
| resize_pending_params->height = 0; |
| |
| // Setup identity scale factor |
| av1_setup_scale_factors_for_frame(&cm->sf_identity, 1, 1, 1, 1); |
| |
| init_buffer_indices(&cpi->force_intpel_info, cm->remapped_ref_idx); |
| |
| av1_noise_estimate_init(&cpi->noise_estimate, cm->width, cm->height); |
| } |
| |
| int aom_strcmp(const char *a, const char *b) { |
| if (a == NULL && b == NULL) return 0; |
| if (a == NULL && b != NULL) return -1; |
| if (a != NULL && b == NULL) return 1; |
| return strcmp(a, b); |
| } |
| |
| static void set_max_drl_bits(struct AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| // Add logic to choose this in the range [MIN_MAX_DRL_BITS, MAX_MAX_DRL_BITS] |
| if (cpi->oxcf.tool_cfg.max_drl_refmvs == 0) { |
| // TODO(any): Implement an auto mode that potentially adapts the parameter |
| // frame to frame. Currently set at a default value. |
| cm->features.max_drl_bits = DEF_MAX_DRL_REFMVS - 1; |
| } else { |
| cm->features.max_drl_bits = cpi->oxcf.tool_cfg.max_drl_refmvs - 1; |
| } |
| assert(cm->features.max_drl_bits >= MIN_MAX_DRL_BITS && |
| cm->features.max_drl_bits <= MAX_MAX_DRL_BITS); |
| } |
| |
| #if CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| static void set_max_bvp_drl_bits(struct AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| // Add logic to choose this in the range [MIN_MAX_IBC_DRL_BITS, |
| // MAX_MAX_IBC_DRL_BITS] |
| if (cpi->oxcf.tool_cfg.max_drl_refbvs == 0) { |
| // TODO(any): Implement an auto mode that potentially adapts the parameter |
| // frame to frame. Currently set at a default value. |
| cm->features.max_bvp_drl_bits = DEF_MAX_DRL_REFBVS - 1; |
| } else { |
| cm->features.max_bvp_drl_bits = cpi->oxcf.tool_cfg.max_drl_refbvs - 1; |
| } |
| assert(cm->features.max_bvp_drl_bits >= MIN_MAX_IBC_DRL_BITS && |
| cm->features.max_bvp_drl_bits <= MAX_MAX_IBC_DRL_BITS); |
| } |
| #endif // CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| |
| static void set_seq_lr_tools_mask(SequenceHeader *const seq_params, |
| const AV1EncoderConfig *oxcf) { |
| const ToolCfg *const tool_cfg = &oxcf->tool_cfg; |
| seq_params->lr_tools_disable_mask[0] = 0; // default - no tools disabled |
| seq_params->lr_tools_disable_mask[1] = 0; // default - no tools disabled |
| |
| // Parse oxcf here to disable tools as requested through cmd lines |
| // Disable SGRPROJ if needed |
| if (!tool_cfg->enable_sgrproj) { |
| seq_params->lr_tools_disable_mask[0] |= (1 << RESTORE_SGRPROJ); |
| seq_params->lr_tools_disable_mask[1] |= (1 << RESTORE_SGRPROJ); |
| } |
| if (!tool_cfg->enable_wiener) { |
| seq_params->lr_tools_disable_mask[0] |= (1 << RESTORE_WIENER); |
| seq_params->lr_tools_disable_mask[1] |= (1 << RESTORE_WIENER); |
| } |
| |
| if (!tool_cfg->enable_pc_wiener) { |
| seq_params->lr_tools_disable_mask[0] |= (1 << RESTORE_PC_WIENER); |
| seq_params->lr_tools_disable_mask[1] |= (1 << RESTORE_PC_WIENER); |
| } |
| if (!tool_cfg->enable_wiener_nonsep) { |
| seq_params->lr_tools_disable_mask[0] |= (1 << RESTORE_WIENER_NONSEP); |
| seq_params->lr_tools_disable_mask[1] |= (1 << RESTORE_WIENER_NONSEP); |
| } |
| |
| seq_params->lr_tools_disable_mask[1] |= DEF_UV_LR_TOOLS_DISABLE_MASK; |
| } |
| |
| void av1_change_config(struct AV1_COMP *cpi, const AV1EncoderConfig *oxcf) { |
| AV1_COMMON *const cm = &cpi->common; |
| SequenceHeader *const seq_params = &cm->seq_params; |
| RATE_CONTROL *const rc = &cpi->rc; |
| MACROBLOCK *const x = &cpi->td.mb; |
| AV1LevelParams *const level_params = &cpi->level_params; |
| InitialDimensions *const initial_dimensions = &cpi->initial_dimensions; |
| const FrameDimensionCfg *const frm_dim_cfg = &cpi->oxcf.frm_dim_cfg; |
| const DecoderModelCfg *const dec_model_cfg = &oxcf->dec_model_cfg; |
| const ColorCfg *const color_cfg = &oxcf->color_cfg; |
| const RateControlCfg *const rc_cfg = &oxcf->rc_cfg; |
| // in case of LAP, lag in frames is set according to number of lap buffers |
| // calculated at init time. This stores and restores LAP's lag in frames to |
| // prevent override by new cfg. |
| int lap_lag_in_frames = -1; |
| if (cpi->lap_enabled && cpi->compressor_stage == LAP_STAGE) { |
| lap_lag_in_frames = cpi->oxcf.gf_cfg.lag_in_frames; |
| } |
| |
| if (seq_params->profile != oxcf->profile) seq_params->profile = oxcf->profile; |
| seq_params->bit_depth = oxcf->tool_cfg.bit_depth; |
| seq_params->color_primaries = color_cfg->color_primaries; |
| seq_params->transfer_characteristics = color_cfg->transfer_characteristics; |
| seq_params->matrix_coefficients = color_cfg->matrix_coefficients; |
| seq_params->monochrome = oxcf->tool_cfg.enable_monochrome; |
| seq_params->chroma_sample_position = color_cfg->chroma_sample_position; |
| seq_params->color_range = color_cfg->color_range; |
| |
| assert(IMPLIES(seq_params->profile <= PROFILE_1, |
| seq_params->bit_depth <= AOM_BITS_10)); |
| |
| seq_params->timing_info_present = dec_model_cfg->timing_info_present; |
| seq_params->timing_info.num_units_in_display_tick = |
| dec_model_cfg->timing_info.num_units_in_display_tick; |
| seq_params->timing_info.time_scale = dec_model_cfg->timing_info.time_scale; |
| seq_params->timing_info.equal_picture_interval = |
| dec_model_cfg->timing_info.equal_picture_interval; |
| seq_params->timing_info.num_ticks_per_picture = |
| dec_model_cfg->timing_info.num_ticks_per_picture; |
| |
| seq_params->display_model_info_present_flag = |
| dec_model_cfg->display_model_info_present_flag; |
| seq_params->decoder_model_info_present_flag = |
| dec_model_cfg->decoder_model_info_present_flag; |
| if (dec_model_cfg->decoder_model_info_present_flag) { |
| // set the decoder model parameters in schedule mode |
| seq_params->decoder_model_info.num_units_in_decoding_tick = |
| dec_model_cfg->num_units_in_decoding_tick; |
| cm->buffer_removal_time_present = 1; |
| av1_set_aom_dec_model_info(&seq_params->decoder_model_info); |
| av1_set_dec_model_op_parameters(&seq_params->op_params[0]); |
| } else if (seq_params->timing_info_present && |
| seq_params->timing_info.equal_picture_interval && |
| !seq_params->decoder_model_info_present_flag) { |
| // set the decoder model parameters in resource availability mode |
| av1_set_resource_availability_parameters(&seq_params->op_params[0]); |
| } else { |
| seq_params->op_params[0].initial_display_delay = |
| 10; // Default value (not signaled) |
| } |
| |
| av1_update_film_grain_parameters(cpi, oxcf); |
| |
| cpi->oxcf = *oxcf; |
| // When user provides superres_mode = AOM_SUPERRES_AUTO, we still initialize |
| // superres mode for current encoding = AOM_SUPERRES_NONE. This is to ensure |
| // that any analysis (e.g. TPL) happening outside the main encoding loop still |
| // happens at full resolution. |
| // This value will later be set appropriately just before main encoding loop. |
| cpi->superres_mode = oxcf->superres_cfg.superres_mode == AOM_SUPERRES_AUTO |
| ? AOM_SUPERRES_NONE |
| : oxcf->superres_cfg.superres_mode; // default |
| if (seq_params->enable_restoration) set_seq_lr_tools_mask(seq_params, oxcf); |
| x->e_mbd.bd = (int)seq_params->bit_depth; |
| x->e_mbd.global_motion = cm->global_motion; |
| |
| memcpy(level_params->target_seq_level_idx, cpi->oxcf.target_seq_level_idx, |
| sizeof(level_params->target_seq_level_idx)); |
| level_params->keep_level_stats = 0; |
| for (int i = 0; i < MAX_NUM_OPERATING_POINTS; ++i) { |
| if (level_params->target_seq_level_idx[i] <= SEQ_LEVELS) { |
| level_params->keep_level_stats |= 1u << i; |
| if (!level_params->level_info[i]) { |
| CHECK_MEM_ERROR(cm, level_params->level_info[i], |
| aom_calloc(1, sizeof(*level_params->level_info[i]))); |
| } |
| } |
| } |
| |
| // TODO(huisu@): level targeting currently only works for the 0th operating |
| // point, so scalable coding is not supported yet. |
| if (level_params->target_seq_level_idx[0] < SEQ_LEVELS) { |
| // Adjust encoder config in order to meet target level. |
| config_target_level(cpi, level_params->target_seq_level_idx[0], |
| seq_params->tier[0]); |
| } |
| |
| // Need to call av1_rc_init() whenever any QP, lossless or related config |
| // is changed after compressor creation. |
| av1_rc_init(&cpi->oxcf, 0, rc); |
| rc->baseline_gf_interval = (MIN_GF_INTERVAL + MAX_GF_INTERVAL) / 2; |
| |
| cm->features.refresh_frame_context = |
| (oxcf->tool_cfg.frame_parallel_decoding_mode) |
| ? REFRESH_FRAME_CONTEXT_DISABLED |
| : REFRESH_FRAME_CONTEXT_BACKWARD; |
| if (oxcf->tile_cfg.enable_large_scale_tile) |
| cm->features.refresh_frame_context = REFRESH_FRAME_CONTEXT_DISABLED; |
| |
| if (x->palette_buffer == NULL) { |
| CHECK_MEM_ERROR(cm, x->palette_buffer, |
| aom_memalign(16, sizeof(*x->palette_buffer))); |
| } |
| |
| if (x->comp_rd_buffer.pred0 == NULL) { |
| alloc_compound_type_rd_buffers(cm, &x->comp_rd_buffer); |
| } |
| |
| if (x->tmp_conv_dst == NULL) { |
| CHECK_MEM_ERROR( |
| cm, x->tmp_conv_dst, |
| aom_memalign(32, MAX_SB_SIZE * MAX_SB_SIZE * sizeof(*x->tmp_conv_dst))); |
| x->e_mbd.tmp_conv_dst = x->tmp_conv_dst; |
| } |
| |
| if (x->upsample_pred == NULL) { |
| CHECK_MEM_ERROR( |
| cm, x->upsample_pred, |
| aom_memalign(16, MAX_SB_SQUARE * sizeof(*x->upsample_pred))); |
| x->e_mbd.tmp_upsample_pred = x->upsample_pred; |
| } |
| |
| if (x->coef_info == NULL) { |
| CHECK_MEM_ERROR(cm, x->coef_info, |
| aom_malloc(MAX_TX_SQUARE * sizeof(*x->coef_info))); |
| } |
| |
| // Temporary buffers used during the DMVR and OPFL processing. |
| if (x->opfl_vxy_bufs == NULL) { |
| CHECK_MEM_ERROR( |
| cm, x->opfl_vxy_bufs, |
| aom_memalign(32, N_OF_OFFSETS * 4 * sizeof(*x->opfl_vxy_bufs))); |
| x->e_mbd.opfl_vxy_bufs = x->opfl_vxy_bufs; |
| } |
| if (x->opfl_gxy_bufs == NULL) { |
| CHECK_MEM_ERROR( |
| cm, x->opfl_gxy_bufs, |
| aom_memalign(32, MAX_SB_SQUARE * 4 * sizeof(*x->opfl_gxy_bufs))); |
| x->e_mbd.opfl_gxy_bufs = x->opfl_gxy_bufs; |
| } |
| if (x->opfl_dst_bufs == NULL) { |
| CHECK_MEM_ERROR( |
| cm, x->opfl_dst_bufs, |
| aom_memalign(32, MAX_SB_SQUARE * 2 * sizeof(*x->opfl_dst_bufs))); |
| x->e_mbd.opfl_dst_bufs = x->opfl_dst_bufs; |
| } |
| |
| for (int i = 0; i < 2; ++i) { |
| if (x->tmp_pred_bufs[i] == NULL) { |
| CHECK_MEM_ERROR(cm, x->tmp_pred_bufs[i], |
| aom_memalign(32, 2 * MAX_MB_PLANE * MAX_SB_SQUARE * |
| sizeof(*x->tmp_pred_bufs[i]))); |
| x->e_mbd.tmp_obmc_bufs[i] = x->tmp_pred_bufs[i]; |
| } |
| } |
| |
| av1_reset_segment_features(cm); |
| |
| // Add logic to choose this in the range [MIN_MAX_DRL_BITS, MAX_MAX_DRL_BITS] |
| set_max_drl_bits(cpi); |
| |
| av1_set_high_precision_mv(cpi, MV_PRECISION_ONE_EIGHTH_PEL); |
| |
| set_rc_buffer_sizes(rc, rc_cfg); |
| |
| // Under a configuration change, where maximum_buffer_size may change, |
| // keep buffer level clipped to the maximum allowed buffer size. |
| rc->bits_off_target = AOMMIN(rc->bits_off_target, rc->maximum_buffer_size); |
| rc->buffer_level = AOMMIN(rc->buffer_level, rc->maximum_buffer_size); |
| |
| // Set up frame rate and related parameters rate control values. |
| av1_new_framerate(cpi, cpi->framerate); |
| |
| // Set absolute upper and lower quality limits |
| rc->worst_quality = rc_cfg->worst_allowed_q; |
| rc->best_quality = rc_cfg->best_allowed_q; |
| |
| cm->features.interp_filter = |
| oxcf->tile_cfg.enable_large_scale_tile ? EIGHTTAP_REGULAR : SWITCHABLE; |
| |
| cm->features.opfl_refine_type = REFINE_SWITCHABLE; |
| |
| if (frm_dim_cfg->render_width > 0 && frm_dim_cfg->render_height > 0) { |
| cm->render_width = frm_dim_cfg->render_width; |
| cm->render_height = frm_dim_cfg->render_height; |
| } else { |
| cm->render_width = frm_dim_cfg->width; |
| cm->render_height = frm_dim_cfg->height; |
| } |
| cm->width = frm_dim_cfg->width; |
| cm->height = frm_dim_cfg->height; |
| |
| BLOCK_SIZE sb_size = cm->sb_size; |
| BLOCK_SIZE new_sb_size = av1_select_sb_size(cpi); |
| // Superblock size should not be updated after the first key frame. |
| if (!cpi->seq_params_locked) { |
| set_sb_size(cm, new_sb_size); |
| for (int i = 0; i < MAX_NUM_OPERATING_POINTS; ++i) |
| seq_params->tier[i] = (oxcf->tier_mask >> i) & 1; |
| } else { |
| av1_set_frame_sb_size(cm, new_sb_size); |
| } |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| cpi->td.sb_size = cm->sb_size; |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| |
| if (initial_dimensions->width || sb_size != cm->sb_size) { |
| if (cm->width > initial_dimensions->width || |
| cm->height > initial_dimensions->height || cm->sb_size != sb_size) { |
| av1_free_context_buffers(cm); |
| av1_free_shared_coeff_buffer(&cpi->td.shared_coeff_buf); |
| av1_free_sms_tree(&cpi->td); |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| av1_free_sms_bufs(&cpi->td); |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| av1_free_pmc(cpi->td.firstpass_ctx, av1_num_planes(cm)); |
| cpi->td.firstpass_ctx = NULL; |
| alloc_compressor_data(cpi); |
| realloc_segmentation_maps(cpi); |
| initial_dimensions->width = initial_dimensions->height = 0; |
| } |
| } |
| update_frame_size(cpi); |
| |
| rc->is_src_frame_alt_ref = 0; |
| |
| av1_set_tile_info(cm, &cpi->oxcf.tile_cfg); |
| |
| cpi->ext_flags.refresh_frame.update_pending = 0; |
| cpi->ext_flags.refresh_frame_context_pending = 0; |
| cpi->ext_flags.refresh_frame.all_ref_frames = 1; |
| |
| highbd_set_var_fns(cpi); |
| |
| // Init sequence level coding tools |
| // This should not be called after the first key frame. |
| if (!cpi->seq_params_locked) { |
| seq_params->operating_points_cnt_minus_1 = |
| (cm->number_spatial_layers > 1 || cm->number_temporal_layers > 1) |
| ? cm->number_spatial_layers * cm->number_temporal_layers - 1 |
| : 0; |
| av1_init_seq_coding_tools(&cm->seq_params, cm, oxcf); |
| } |
| |
| // restore the value of lag_in_frame for LAP stage. |
| if (lap_lag_in_frames != -1) { |
| cpi->oxcf.gf_cfg.lag_in_frames = lap_lag_in_frames; |
| } |
| |
| bool subgop_config_changed = false; |
| if (aom_strcmp(cpi->subgop_config_path, oxcf->subgop_config_path)) { |
| aom_free(cpi->subgop_config_path); |
| cpi->subgop_config_path = NULL; |
| if (oxcf->subgop_config_path != NULL) { |
| cpi->subgop_config_path = |
| (char *)aom_malloc((strlen(oxcf->subgop_config_path) + 1) * |
| sizeof(*oxcf->subgop_config_path)); |
| strcpy(cpi->subgop_config_path, oxcf->subgop_config_path); |
| } |
| subgop_config_changed = true; |
| } |
| if (aom_strcmp(cpi->subgop_config_str, oxcf->subgop_config_str)) { |
| aom_free(cpi->subgop_config_str); |
| cpi->subgop_config_str = NULL; |
| if (oxcf->subgop_config_str != NULL) { |
| cpi->subgop_config_str = |
| (char *)aom_malloc((strlen(oxcf->subgop_config_str) + 1) * |
| sizeof(*oxcf->subgop_config_str)); |
| strcpy(cpi->subgop_config_str, oxcf->subgop_config_str); |
| } |
| subgop_config_changed = true; |
| } |
| if (subgop_config_changed && cpi->compressor_stage == ENCODE_STAGE) { |
| av1_init_subgop_config_set(&cpi->subgop_config_set); |
| // Parse config file first |
| av1_process_subgop_config_set_fromfile(cpi->subgop_config_path, |
| &cpi->subgop_config_set); |
| // Parse config string next, which may override config file configs |
| // or append to it. |
| av1_process_subgop_config_set(cpi->subgop_config_str, |
| &cpi->subgop_config_set); |
| if (cpi->print_per_frame_stats) { |
| printf("Successfully processed %d subgop configs.\n", |
| cpi->subgop_config_set.num_configs); |
| // Print out the configuration. Note the printed configuration |
| // is in fact in the config file format that can be parsed back. |
| av1_print_subgop_config_set(&cpi->subgop_config_set); |
| } |
| } |
| |
| cpi->alloc_pyramid = oxcf->tool_cfg.enable_global_motion; |
| } |
| |
| static INLINE void init_frame_info(FRAME_INFO *frame_info, |
| const AV1_COMMON *const cm) { |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| const SequenceHeader *const seq_params = &cm->seq_params; |
| frame_info->frame_width = cm->width; |
| frame_info->frame_height = cm->height; |
| frame_info->mi_cols = mi_params->mi_cols; |
| frame_info->mi_rows = mi_params->mi_rows; |
| frame_info->mb_cols = mi_params->mb_cols; |
| frame_info->mb_rows = mi_params->mb_rows; |
| frame_info->num_mbs = mi_params->MBs; |
| frame_info->bit_depth = seq_params->bit_depth; |
| frame_info->subsampling_x = seq_params->subsampling_x; |
| frame_info->subsampling_y = seq_params->subsampling_y; |
| } |
| |
| static INLINE void init_tip_ref_frame(AV1_COMMON *const cm) { |
| cm->tip_ref.tip_frame = aom_calloc(1, sizeof(*cm->tip_ref.tip_frame)); |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| cm->tip_ref.tmp_tip_frame = aom_calloc(1, sizeof(*cm->tip_ref.tmp_tip_frame)); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| } |
| |
| static INLINE void free_tip_ref_frame(AV1_COMMON *const cm) { |
| aom_free_frame_buffer(&cm->tip_ref.tip_frame->buf); |
| aom_free(cm->tip_ref.tip_frame); |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| aom_free_frame_buffer(&cm->tip_ref.tmp_tip_frame->buf); |
| aom_free(cm->tip_ref.tmp_tip_frame); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| } |
| |
| #if CONFIG_OPTFLOW_ON_TIP |
| static INLINE void init_optflow_bufs(AV1_COMMON *const cm) { |
| cm->dst0_16_tip = aom_memalign(32, 8 * 8 * sizeof(uint16_t)); |
| cm->dst1_16_tip = aom_memalign(32, 8 * 8 * sizeof(uint16_t)); |
| cm->gx0 = aom_memalign(32, 2 * 8 * 8 * sizeof(*cm->gx0)); |
| cm->gx1 = aom_memalign(32, 2 * 8 * 8 * sizeof(*cm->gx1)); |
| cm->gy0 = cm->gx0 + (8 * 8); |
| cm->gy1 = cm->gx1 + (8 * 8); |
| } |
| static INLINE void free_optflow_bufs(AV1_COMMON *const cm) { |
| aom_free(cm->dst0_16_tip); |
| aom_free(cm->dst1_16_tip); |
| aom_free(cm->gx0); |
| aom_free(cm->gx1); |
| } |
| #endif // CONFIG_OPTFLOW_ON_TIP |
| |
| AV1_COMP *av1_create_compressor(AV1EncoderConfig *oxcf, BufferPool *const pool, |
| FIRSTPASS_STATS *frame_stats_buf, |
| COMPRESSOR_STAGE stage, int num_lap_buffers, |
| int lap_lag_in_frames, |
| STATS_BUFFER_CTX *stats_buf_context) { |
| AV1_COMP *volatile const cpi = aom_memalign(32, sizeof(AV1_COMP)); |
| AV1_COMMON *volatile const cm = cpi != NULL ? &cpi->common : NULL; |
| |
| if (!cm) return NULL; |
| |
| av1_zero(*cpi); |
| |
| // The jmp_buf is valid only for the duration of the function that calls |
| // setjmp(). Therefore, this function must reset the 'setjmp' field to 0 |
| // before it returns. |
| if (setjmp(cm->error.jmp)) { |
| cm->error.setjmp = 0; |
| av1_remove_compressor(cpi); |
| return 0; |
| } |
| |
| #if DEBUG_EXTQUANT |
| cm->fEncCoeffLog = fopen("EncCoeffLog.txt", "wt"); |
| #endif |
| |
| cm->error.setjmp = 1; |
| cpi->lap_enabled = num_lap_buffers > 0; |
| cpi->compressor_stage = stage; |
| |
| CommonModeInfoParams *const mi_params = &cm->mi_params; |
| mi_params->free_mi = enc_free_mi; |
| mi_params->setup_mi = enc_setup_mi; |
| mi_params->set_mb_mi = (cpi->compressor_stage == LAP_STAGE) |
| ? stat_stage_set_mb_mi |
| : enc_set_mb_mi; |
| |
| mi_params->mi_alloc_bsize = BLOCK_4X4; |
| #if CONFIG_COMBINE_PC_NS_WIENER |
| cm->frame_filter_dictionary_stride = 0; |
| cm->frame_filter_dictionary = NULL; |
| cm->translated_pcwiener_filters = NULL; |
| #endif // CONFIG_COMBINE_PC_NS_WIENER |
| |
| CHECK_MEM_ERROR(cm, cm->fc, |
| (FRAME_CONTEXT *)aom_memalign(32, sizeof(*cm->fc))); |
| CHECK_MEM_ERROR( |
| cm, cm->default_frame_context, |
| (FRAME_CONTEXT *)aom_memalign(32, sizeof(*cm->default_frame_context))); |
| memset(cm->fc, 0, sizeof(*cm->fc)); |
| memset(cm->default_frame_context, 0, sizeof(*cm->default_frame_context)); |
| |
| cpi->common.buffer_pool = pool; |
| |
| init_config(cpi, oxcf); |
| if (cpi->compressor_stage == LAP_STAGE) { |
| cpi->oxcf.gf_cfg.lag_in_frames = lap_lag_in_frames; |
| } |
| |
| cpi->frames_left = cpi->oxcf.input_cfg.limit; |
| |
| av1_rc_init(&cpi->oxcf, 0, &cpi->rc); |
| |
| // For two pass and lag_in_frames > 33 in LAP. |
| cpi->rc.enable_scenecut_detection = ENABLE_SCENECUT_MODE_2; |
| if (cpi->lap_enabled) { |
| if ((num_lap_buffers < |
| (MAX_GF_LENGTH_LAP + SCENE_CUT_KEY_TEST_INTERVAL + 1)) && |
| num_lap_buffers >= (MAX_GF_LENGTH_LAP + 3)) { |
| /* |
| * For lag in frames >= 19 and <33, enable scenecut |
| * with limited future frame prediction. |
| */ |
| cpi->rc.enable_scenecut_detection = ENABLE_SCENECUT_MODE_1; |
| } else if (num_lap_buffers < (MAX_GF_LENGTH_LAP + 3)) { |
| // Disable scenecut when lag_in_frames < 19. |
| cpi->rc.enable_scenecut_detection = DISABLE_SCENECUT; |
| } |
| } |
| init_frame_info(&cpi->frame_info, cm); |
| |
| cm->current_frame.frame_number = 0; |
| cm->current_frame.key_frame_number = 0; |
| cm->current_frame_id = -1; |
| cpi->seq_params_locked = 0; |
| cpi->partition_search_skippable_frame = 0; |
| cpi->tile_data = NULL; |
| cpi->last_show_frame_buf = NULL; |
| realloc_segmentation_maps(cpi); |
| |
| cpi->b_calculate_psnr = CONFIG_INTERNAL_STATS; |
| #if CONFIG_INTERNAL_STATS |
| cpi->b_calculate_blockiness = 1; |
| cpi->b_calculate_consistency = 1; |
| cpi->total_inconsistency = 0; |
| cpi->psnr[0].worst = 100.0; |
| cpi->psnr[1].worst = 100.0; |
| cpi->worst_ssim = 100.0; |
| |
| cpi->count[0] = 0; |
| cpi->count[1] = 0; |
| cpi->bytes = 0; |
| #if CONFIG_SPEED_STATS |
| cpi->tx_search_count = 0; |
| #endif // CONFIG_SPEED_STATS |
| |
| if (cpi->b_calculate_psnr) { |
| cpi->total_sq_error[0] = 0; |
| cpi->total_samples[0] = 0; |
| cpi->total_sq_error[1] = 0; |
| cpi->total_samples[1] = 0; |
| cpi->tot_recode_hits = 0; |
| cpi->summed_quality = 0; |
| cpi->summed_weights = 0; |
| } |
| |
| cpi->fastssim.worst = 100.0; |
| cpi->psnrhvs.worst = 100.0; |
| |
| if (cpi->b_calculate_blockiness) { |
| cpi->total_blockiness = 0; |
| cpi->worst_blockiness = 0.0; |
| } |
| |
| if (cpi->b_calculate_consistency) { |
| CHECK_MEM_ERROR( |
| cm, cpi->ssim_vars, |
| aom_malloc(sizeof(*cpi->ssim_vars) * 4 * cpi->common.mi_params.mi_rows * |
| cpi->common.mi_params.mi_cols)); |
| cpi->worst_consistency = 100.0; |
| } |
| #endif |
| #if CONFIG_ENTROPY_STATS |
| av1_zero(aggregate_fc); |
| #endif // CONFIG_ENTROPY_STATS |
| |
| cpi->time_stamps.first_ever = INT64_MAX; |
| |
| #ifdef OUTPUT_YUV_REC |
| yuv_rec_file = fopen("rec.yuv", "wb"); |
| #endif |
| |
| assert(MAX_LAP_BUFFERS >= MAX_LAG_BUFFERS); |
| int size = get_stats_buf_size(num_lap_buffers, MAX_LAG_BUFFERS); |
| for (int i = 0; i < size; i++) |
| cpi->twopass.frame_stats_arr[i] = &frame_stats_buf[i]; |
| |
| cpi->twopass.stats_buf_ctx = stats_buf_context; |
| cpi->twopass.stats_in = cpi->twopass.stats_buf_ctx->stats_in_start; |
| |
| if (is_stat_consumption_stage(cpi)) { |
| av1_init_single_pass_lap(cpi); |
| } |
| |
| int sb_mi_size = av1_get_sb_mi_size(cm); |
| |
| alloc_obmc_buffers(&cpi->td.mb.obmc_buffer, cm); |
| |
| for (int x = 0; x < 2; x++) |
| for (int y = 0; y < 2; y++) |
| CHECK_MEM_ERROR( |
| cm, cpi->td.mb.intrabc_hash_info.hash_value_buffer[x][y], |
| (uint32_t *)aom_malloc( |
| AOM_BUFFER_SIZE_FOR_BLOCK_HASH * |
| sizeof(*cpi->td.mb.intrabc_hash_info.hash_value_buffer[0][0]))); |
| |
| cpi->td.mb.intrabc_hash_info.g_crc_initialized = 0; |
| |
| CHECK_MEM_ERROR(cm, cpi->td.mb.mbmi_ext, |
| aom_calloc(sb_mi_size, sizeof(*cpi->td.mb.mbmi_ext))); |
| |
| av1_set_speed_features_framesize_independent(cpi, oxcf->speed); |
| av1_set_speed_features_framesize_dependent(cpi, oxcf->speed); |
| |
| CHECK_MEM_ERROR(cm, cpi->consec_zero_mv, |
| aom_calloc((mi_params->mi_rows * mi_params->mi_cols) >> 2, |
| sizeof(*cpi->consec_zero_mv))); |
| #if CONFIG_SCC_DETERMINATION |
| cpi->palette_pixel_num = 0; |
| #endif // CONFIG_SCC_DETERMINATION |
| |
| { |
| const BLOCK_SIZE bsize = BLOCK_16X16; |
| const int w = mi_size_wide[bsize]; |
| const int h = mi_size_high[bsize]; |
| const int num_cols = (mi_params->mi_cols + w - 1) / w; |
| const int num_rows = (mi_params->mi_rows + h - 1) / h; |
| CHECK_MEM_ERROR(cm, cpi->tpl_rdmult_scaling_factors, |
| aom_calloc(num_rows * num_cols, |
| sizeof(*cpi->tpl_rdmult_scaling_factors))); |
| CHECK_MEM_ERROR(cm, cpi->tpl_sb_rdmult_scaling_factors, |
| aom_calloc(num_rows * num_cols, |
| sizeof(*cpi->tpl_sb_rdmult_scaling_factors))); |
| } |
| |
| { |
| const BLOCK_SIZE bsize = BLOCK_16X16; |
| const int w = mi_size_wide[bsize]; |
| const int h = mi_size_high[bsize]; |
| const int num_cols = (mi_params->mi_cols + w - 1) / w; |
| const int num_rows = (mi_params->mi_rows + h - 1) / h; |
| CHECK_MEM_ERROR(cm, cpi->ssim_rdmult_scaling_factors, |
| aom_calloc(num_rows * num_cols, |
| sizeof(*cpi->ssim_rdmult_scaling_factors))); |
| } |
| |
| #if CONFIG_TUNE_VMAF |
| { |
| const BLOCK_SIZE bsize = BLOCK_64X64; |
| const int w = mi_size_wide[bsize]; |
| const int h = mi_size_high[bsize]; |
| const int num_cols = (mi_params->mi_cols + w - 1) / w; |
| const int num_rows = (mi_params->mi_rows + h - 1) / h; |
| CHECK_MEM_ERROR(cm, cpi->vmaf_info.rdmult_scaling_factors, |
| aom_calloc(num_rows * num_cols, |
| sizeof(*cpi->vmaf_info.rdmult_scaling_factors))); |
| for (int i = 0; i < MAX_ARF_LAYERS; i++) { |
| cpi->vmaf_info.last_frame_unsharp_amount[i] = -1.0; |
| cpi->vmaf_info.last_frame_ysse[i] = -1.0; |
| cpi->vmaf_info.last_frame_vmaf[i] = -1.0; |
| cpi->vmaf_info.best_unsharp_amount[i] = -1.0; |
| } |
| cpi->vmaf_info.original_qindex = -1; |
| |
| #if CONFIG_USE_VMAF_RC |
| cpi->vmaf_info.vmaf_model = NULL; |
| #endif |
| } |
| #endif |
| |
| #if CONFIG_COLLECT_PARTITION_STATS == 2 |
| av1_zero(cpi->partition_stats); |
| #endif |
| |
| highbd_set_var_fns(cpi); |
| |
| /* av1_init_quantizer() is first called here. Add check in |
| * av1_frame_init_quantizer() so that av1_init_quantizer is only |
| * called later when needed. This will avoid unnecessary calls of |
| * av1_init_quantizer() for every frame. |
| */ |
| av1_init_quantizer(&cm->seq_params, &cpi->enc_quant_dequant_params, |
| &cm->quant_params); |
| av1_qm_init(&cm->quant_params, av1_num_planes(cm)); |
| |
| av1_loop_filter_init(cm); |
| cm->superres_scale_denominator = SCALE_NUMERATOR; |
| cm->superres_upscaled_width = oxcf->frm_dim_cfg.width; |
| cm->superres_upscaled_height = oxcf->frm_dim_cfg.height; |
| av1_loop_restoration_precal(); |
| |
| // The buffers related to TIP are not used during LAP stage. Hence, |
| // the allocation is limited to encode stage. |
| if (cpi->compressor_stage == ENCODE_STAGE) init_tip_ref_frame(cm); |
| #if CONFIG_OPTFLOW_ON_TIP |
| init_optflow_bufs(cm); |
| #endif // CONFIG_OPTFLOW_ON_TIP |
| |
| cm->error.setjmp = 0; |
| |
| return cpi; |
| } |
| |
| #if CONFIG_INTERNAL_STATS |
| #define SNPRINT(H, T) snprintf((H) + strlen(H), sizeof(H) - strlen(H), (T)) |
| |
| #define SNPRINT2(H, T, V) \ |
| snprintf((H) + strlen(H), sizeof(H) - strlen(H), (T), (V)) |
| #endif // CONFIG_INTERNAL_STATS |
| |
| // This function will change the state and free the mutex of corresponding |
| // workers and terminate the object. The object can not be re-used unless a call |
| // to reset() is made. |
| static AOM_INLINE void terminate_worker_data(AV1_COMP *cpi) { |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| for (int t = mt_info->num_workers - 1; t >= 0; --t) { |
| AVxWorker *const worker = &mt_info->workers[t]; |
| aom_get_worker_interface()->end(worker); |
| } |
| } |
| |
| // Deallocate allocated thread_data. |
| static AOM_INLINE void free_thread_data(AV1_COMP *cpi) { |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| AV1_COMMON *cm = &cpi->common; |
| for (int t = 0; t < mt_info->num_workers; ++t) { |
| EncWorkerData *const thread_data = &mt_info->tile_thr_data[t]; |
| aom_free(thread_data->td->tctx); |
| if (t == 0) continue; |
| aom_free(thread_data->td->palette_buffer); |
| aom_free(thread_data->td->tmp_conv_dst); |
| aom_free(thread_data->td->upsample_pred); |
| aom_free(thread_data->td->coef_info); |
| |
| // Temporary buffers used during the DMVR and OPFL processing. |
| aom_free(thread_data->td->opfl_vxy_bufs); |
| aom_free(thread_data->td->opfl_gxy_bufs); |
| aom_free(thread_data->td->opfl_dst_bufs); |
| release_compound_type_rd_buffers(&thread_data->td->comp_rd_buffer); |
| for (int j = 0; j < 2; ++j) { |
| aom_free(thread_data->td->tmp_pred_bufs[j]); |
| } |
| release_obmc_buffers(&thread_data->td->obmc_buffer); |
| aom_free(thread_data->td->vt64x64); |
| |
| aom_free(thread_data->td->mb.inter_modes_info); |
| for (int x = 0; x < 2; x++) { |
| for (int y = 0; y < 2; y++) { |
| aom_free(thread_data->td->hash_value_buffer[x][y]); |
| thread_data->td->hash_value_buffer[x][y] = NULL; |
| } |
| } |
| aom_free(thread_data->td->counts); |
| aom_free(thread_data->td->mbmi_ext); |
| av1_free_pmc(thread_data->td->firstpass_ctx, av1_num_planes(cm)); |
| thread_data->td->firstpass_ctx = NULL; |
| av1_free_shared_coeff_buffer(&thread_data->td->shared_coeff_buf); |
| av1_free_sms_tree(thread_data->td); |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| av1_free_sms_bufs(thread_data->td); |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| #if CONFIG_ML_PART_SPLIT |
| av2_part_split_prune_tflite_close(&(thread_data->td->partition_model)); |
| #endif // CONFIG_ML_PART_SPLIT |
| aom_free(thread_data->td); |
| } |
| } |
| |
| void av1_remove_compressor(AV1_COMP *cpi) { |
| if (!cpi) return; |
| |
| AV1_COMMON *cm = &cpi->common; |
| if (cm->current_frame.frame_number > 0) { |
| #if CONFIG_ENTROPY_STATS |
| if (!is_stat_generation_stage(cpi)) { |
| fprintf(stderr, "Writing counts.stt\n"); |
| FILE *f = fopen("counts.stt", "wb"); |
| fwrite(&aggregate_fc, sizeof(aggregate_fc), 1, f); |
| fclose(f); |
| } |
| #endif // CONFIG_ENTROPY_STATS |
| #if CONFIG_INTERNAL_STATS |
| aom_clear_system_state(); |
| |
| if (!is_stat_generation_stage(cpi)) { |
| char headings[512] = { 0 }; |
| char results[512] = { 0 }; |
| FILE *f = fopen("opsnr.stt", "a"); |
| double time_encoded = |
| (cpi->time_stamps.prev_end_seen - cpi->time_stamps.first_ever) / |
| 10000000.000; |
| double total_encode_time = |
| (cpi->time_receive_data + cpi->time_compress_data) / 1000.000; |
| const double dr = |
| (double)cpi->bytes * (double)8 / (double)1000 / time_encoded; |
| const double peak = |
| (double)((1 << cpi->oxcf.input_cfg.input_bit_depth) - 1); |
| const double target_rate = |
| (double)cpi->oxcf.rc_cfg.target_bandwidth / 1000; |
| const double rate_err = ((100.0 * (dr - target_rate)) / target_rate); |
| |
| if (cpi->b_calculate_psnr) { |
| const double total_psnr = |
| aom_sse_to_psnr((double)cpi->total_samples[0], peak, |
| (double)cpi->total_sq_error[0]); |
| const double total_ssim = |
| 100 * pow(cpi->summed_quality / cpi->summed_weights, 8.0); |
| snprintf(headings, sizeof(headings), |
| "Bitrate\tAVGPsnr\tGLBPsnr\tAVPsnrP\tGLPsnrP\t" |
| "AOMSSIM\tVPSSIMP\tFASTSIM\tPSNRHVS\t" |
| "WstPsnr\tWstSsim\tWstFast\tWstHVS\t" |
| "AVPsrnY\tAPsnrCb\tAPsnrCr"); |
| snprintf(results, sizeof(results), |
| "%7.2f\t%7.3f\t%7.3f\t%7.3f\t%7.3f\t" |
| "%7.3f\t%7.3f\t%7.3f\t%7.3f\t" |
| "%7.3f\t%7.3f\t%7.3f\t%7.3f\t" |
| "%7.3f\t%7.3f\t%7.3f", |
| dr, cpi->psnr[0].stat[STAT_ALL] / cpi->count[0], total_psnr, |
| cpi->psnr[0].stat[STAT_ALL] / cpi->count[0], total_psnr, |
| total_ssim, total_ssim, |
| cpi->fastssim.stat[STAT_ALL] / cpi->count[0], |
| cpi->psnrhvs.stat[STAT_ALL] / cpi->count[0], |
| cpi->psnr[0].worst, cpi->worst_ssim, cpi->fastssim.worst, |
| cpi->psnrhvs.worst, cpi->psnr[0].stat[STAT_Y] / cpi->count[0], |
| cpi->psnr[0].stat[STAT_U] / cpi->count[0], |
| cpi->psnr[0].stat[STAT_V] / cpi->count[0]); |
| |
| if (cpi->b_calculate_blockiness) { |
| SNPRINT(headings, "\t Block\tWstBlck"); |
| SNPRINT2(results, "\t%7.3f", cpi->total_blockiness / cpi->count[0]); |
| SNPRINT2(results, "\t%7.3f", cpi->worst_blockiness); |
| } |
| |
| if (cpi->b_calculate_consistency) { |
| double consistency = |
| aom_sse_to_psnr((double)cpi->total_samples[0], peak, |
| (double)cpi->total_inconsistency); |
| |
| SNPRINT(headings, "\tConsist\tWstCons"); |
| SNPRINT2(results, "\t%7.3f", consistency); |
| SNPRINT2(results, "\t%7.3f", cpi->worst_consistency); |
| } |
| |
| SNPRINT(headings, "\t Time\tRcErr\tAbsErr"); |
| SNPRINT2(results, "\t%8.0f", total_encode_time); |
| SNPRINT2(results, " %7.2f", rate_err); |
| SNPRINT2(results, " %7.2f", fabs(rate_err)); |
| |
| SNPRINT(headings, "\tAPsnr611"); |
| SNPRINT2(results, " %7.3f", |
| (6 * cpi->psnr[0].stat[STAT_Y] + cpi->psnr[0].stat[STAT_U] + |
| cpi->psnr[0].stat[STAT_V]) / |
| (cpi->count[0] * 8)); |
| |
| const uint32_t in_bit_depth = cpi->oxcf.input_cfg.input_bit_depth; |
| const uint32_t bit_depth = cpi->td.mb.e_mbd.bd; |
| if (in_bit_depth < bit_depth) { |
| const double peak_hbd = (double)((1 << bit_depth) - 1); |
| const double total_psnr_hbd = |
| aom_sse_to_psnr((double)cpi->total_samples[1], peak_hbd, |
| (double)cpi->total_sq_error[1]); |
| SNPRINT(headings, |
| "\t AVGPsnrH GLBPsnrH AVPsnrPH GLPsnrPH" |
| " AVPsnrYH APsnrCbH APsnrCrH WstPsnrH"); |
| SNPRINT2(results, "\t%7.3f", |
| cpi->psnr[1].stat[STAT_ALL] / cpi->count[1]); |
| SNPRINT2(results, " %7.3f", total_psnr_hbd); |
| SNPRINT2(results, " %7.3f", |
| cpi->psnr[1].stat[STAT_ALL] / cpi->count[1]); |
| SNPRINT2(results, " %7.3f", total_psnr_hbd); |
| SNPRINT2(results, " %7.3f", |
| cpi->psnr[1].stat[STAT_Y] / cpi->count[1]); |
| SNPRINT2(results, " %7.3f", |
| cpi->psnr[1].stat[STAT_U] / cpi->count[1]); |
| SNPRINT2(results, " %7.3f", |
| cpi->psnr[1].stat[STAT_V] / cpi->count[1]); |
| SNPRINT2(results, " %7.3f", cpi->psnr[1].worst); |
| } |
| fprintf(f, "%s\n", headings); |
| fprintf(f, "%s\n", results); |
| } |
| |
| fclose(f); |
| } |
| #endif // CONFIG_INTERNAL_STATS |
| #if CONFIG_SPEED_STATS |
| if (!is_stat_generation_stage(cpi)) { |
| fprintf(stdout, "tx_search_count = %d\n", cpi->tx_search_count); |
| } |
| #endif // CONFIG_SPEED_STATS |
| |
| #if CONFIG_COLLECT_PARTITION_STATS == 2 |
| if (!is_stat_generation_stage(cpi)) { |
| av1_print_partition_stats(&cpi->partition_stats); |
| } |
| #endif |
| } |
| |
| TplParams *const tpl_data = &cpi->tpl_data; |
| for (int frame = 0; frame < MAX_LAG_BUFFERS; ++frame) { |
| aom_free(tpl_data->tpl_stats_pool[frame]); |
| aom_free_frame_buffer(&tpl_data->tpl_rec_pool[frame]); |
| } |
| |
| if (cpi->compressor_stage != LAP_STAGE) { |
| terminate_worker_data(cpi); |
| free_thread_data(cpi); |
| } |
| |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| #if CONFIG_MULTITHREAD |
| pthread_mutex_t *const enc_row_mt_mutex_ = mt_info->enc_row_mt.mutex_; |
| pthread_mutex_t *const gm_mt_mutex_ = mt_info->gm_sync.mutex_; |
| if (enc_row_mt_mutex_ != NULL) { |
| pthread_mutex_destroy(enc_row_mt_mutex_); |
| aom_free(enc_row_mt_mutex_); |
| } |
| if (gm_mt_mutex_ != NULL) { |
| pthread_mutex_destroy(gm_mt_mutex_); |
| aom_free(gm_mt_mutex_); |
| } |
| #endif |
| av1_row_mt_mem_dealloc(cpi); |
| if (cpi->compressor_stage != LAP_STAGE) { |
| aom_free(mt_info->tile_thr_data); |
| aom_free(mt_info->workers); |
| } |
| |
| av1_tpl_dealloc(&tpl_data->tpl_mt_sync); |
| if (mt_info->num_workers > 1) { |
| av1_loop_filter_dealloc(&mt_info->lf_row_sync); |
| av1_loop_restoration_dealloc(&mt_info->lr_row_sync, mt_info->num_workers); |
| av1_gm_dealloc(&mt_info->gm_sync); |
| } |
| |
| dealloc_compressor_data(cpi); |
| #if !CONFIG_IBP_WEIGHT |
| free_ibp_info(cm->ibp_directional_weights); |
| #endif //! CONFIG_IBP_WEIGHT |
| |
| #if CONFIG_INTERNAL_STATS |
| aom_free(cpi->ssim_vars); |
| cpi->ssim_vars = NULL; |
| #endif // CONFIG_INTERNAL_STATS |
| |
| if (cpi->compressor_stage == ENCODE_STAGE) free_tip_ref_frame(cm); |
| #if CONFIG_OPTFLOW_ON_TIP |
| free_optflow_bufs(cm); |
| #endif // CONFIG_OPTFLOW_ON_TIP |
| |
| av1_remove_common(cm); |
| av1_free_ref_frame_buffers(cm->buffer_pool); |
| |
| #if DEBUG_EXTQUANT |
| if (cpi->common.fEncCoeffLog != NULL) { |
| fclose(cpi->common.fEncCoeffLog); |
| } |
| #endif |
| aom_free(cpi->subgop_config_str); |
| aom_free(cpi->subgop_config_path); |
| aom_free(cpi); |
| |
| #ifdef OUTPUT_YUV_REC |
| fclose(yuv_rec_file); |
| #endif |
| } |
| |
| static void generate_psnr_packet(AV1_COMP *cpi) { |
| struct aom_codec_cx_pkt pkt; |
| int i; |
| PSNR_STATS psnr; |
| const uint32_t in_bit_depth = cpi->oxcf.input_cfg.input_bit_depth; |
| const uint32_t bit_depth = cpi->td.mb.e_mbd.bd; |
| aom_calc_highbd_psnr(cpi->source, &cpi->common.cur_frame->buf, &psnr, |
| bit_depth, in_bit_depth); |
| |
| for (i = 0; i < 4; ++i) { |
| pkt.data.psnr.samples[i] = psnr.samples[i]; |
| pkt.data.psnr.sse[i] = psnr.sse[i]; |
| pkt.data.psnr.psnr[i] = psnr.psnr[i]; |
| } |
| |
| if (in_bit_depth < bit_depth) { |
| for (i = 0; i < 4; ++i) { |
| pkt.data.psnr.samples_hbd[i] = psnr.samples_hbd[i]; |
| pkt.data.psnr.sse_hbd[i] = psnr.sse_hbd[i]; |
| pkt.data.psnr.psnr_hbd[i] = psnr.psnr_hbd[i]; |
| } |
| } |
| |
| pkt.kind = AOM_CODEC_PSNR_PKT; |
| aom_codec_pkt_list_add(cpi->output_pkt_list, &pkt); |
| } |
| |
| int av1_use_as_reference(int *ext_ref_frame_flags, int ref_frame_flags) { |
| if (ref_frame_flags > ((1 << INTER_REFS_PER_FRAME) - 1)) return -1; |
| |
| *ext_ref_frame_flags = ref_frame_flags; |
| return 0; |
| } |
| |
| int av1_copy_reference_enc(AV1_COMP *cpi, int idx, YV12_BUFFER_CONFIG *sd) { |
| AV1_COMMON *const cm = &cpi->common; |
| const int num_planes = av1_num_planes(cm); |
| YV12_BUFFER_CONFIG *cfg = get_ref_frame(cm, idx); |
| if (cfg) { |
| aom_yv12_copy_frame(cfg, sd, num_planes); |
| return 0; |
| } else { |
| return -1; |
| } |
| } |
| |
| int av1_set_reference_enc(AV1_COMP *cpi, int idx, YV12_BUFFER_CONFIG *sd) { |
| AV1_COMMON *const cm = &cpi->common; |
| const int num_planes = av1_num_planes(cm); |
| YV12_BUFFER_CONFIG *cfg = get_ref_frame(cm, idx); |
| if (cfg) { |
| aom_yv12_copy_frame(sd, cfg, num_planes); |
| return 0; |
| } else { |
| return -1; |
| } |
| } |
| |
| #ifdef OUTPUT_YUV_REC |
| void aom_write_one_yuv_frame(AV1_COMMON *cm, YV12_BUFFER_CONFIG *s) { |
| uint16_t *src = s->y_buffer; |
| int h = cm->height; |
| if (yuv_rec_file == NULL) return; |
| |
| do { |
| fwrite(src, s->y_width, 2, yuv_rec_file); |
| src += s->y_stride; |
| } while (--h); |
| |
| src = s->u_buffer; |
| h = s->uv_height; |
| |
| do { |
| fwrite(src, s->uv_width, 2, yuv_rec_file); |
| src += s->uv_stride; |
| } while (--h); |
| |
| src = s->v_buffer; |
| h = s->uv_height; |
| |
| do { |
| fwrite(src, s->uv_width, 2, yuv_rec_file); |
| src += s->uv_stride; |
| } while (--h); |
| |
| fflush(yuv_rec_file); |
| return; |
| } |
| #endif // OUTPUT_YUV_REC |
| |
| static void set_mv_search_params(AV1_COMP *cpi) { |
| const AV1_COMMON *const cm = &cpi->common; |
| MotionVectorSearchParams *const mv_search_params = &cpi->mv_search_params; |
| const int max_mv_def = AOMMAX(cm->width, cm->height); |
| |
| // Default based on max resolution. |
| mv_search_params->mv_step_param = av1_init_search_range(max_mv_def); |
| |
| if (cpi->sf.mv_sf.auto_mv_step_size) { |
| if (frame_is_intra_only(cm)) { |
| // Initialize max_mv_magnitude for use in the first INTER frame |
| // after a key/intra-only frame. |
| mv_search_params->max_mv_magnitude = max_mv_def; |
| } else { |
| // Use cpi->max_mv_magnitude == -1 to exclude first pass case. |
| if (cm->show_frame && mv_search_params->max_mv_magnitude != -1) { |
| // Allow mv_steps to correspond to twice the max mv magnitude found |
| // in the previous frame, capped by the default max_mv_magnitude based |
| // on resolution. |
| mv_search_params->mv_step_param = av1_init_search_range( |
| AOMMIN(max_mv_def, 2 * mv_search_params->max_mv_magnitude)); |
| } |
| mv_search_params->max_mv_magnitude = -1; |
| } |
| } |
| } |
| |
| // counts_1: Counts of blocks with no more than color_thresh colors. |
| // counts_2: Counts of blocks with no more than color_thresh colors and |
| // variance larger than var_thresh. |
| static void set_hole_fill_decision(AV1_COMP *cpi, int width, int height, |
| int blk_w, int blk_h, int counts_1, |
| int counts_2) { |
| #if CONFIG_MF_HOLE_FILL_ALWAYS_ENABLE |
| (void)width; |
| (void)height; |
| (void)blk_w; |
| (void)blk_h; |
| (void)counts_1; |
| (void)counts_2; |
| AV1_COMMON *const cm = &cpi->common; |
| cm->seq_params.enable_tip_hole_fill = 1; |
| #else |
| AV1_COMMON *const cm = &cpi->common; |
| const bool is_720p_or_larger = AOMMIN(cm->width, cm->height) >= 720; |
| const bool is_4k_or_larger = AOMMIN(cm->width, cm->height) >= 2160; |
| if (is_4k_or_larger) { |
| cm->seq_params.enable_tip_hole_fill = 1; |
| } else if (!is_720p_or_larger) { |
| cm->seq_params.enable_tip_hole_fill = 0; |
| } else { |
| const int a[4] = { 168, -555, -7690, 25007 }; |
| const int norm = (width * height) / (blk_h * blk_w); |
| const int64_t decision = |
| a[0] + (int64_t)a[1] * counts_1 / norm + |
| (int64_t)a[2] * counts_2 / norm + |
| (int64_t)a[3] * counts_1 * counts_2 / (norm * norm); |
| if (decision > 0) { |
| cm->seq_params.enable_tip_hole_fill = 1; |
| } else { |
| cm->seq_params.enable_tip_hole_fill = 0; |
| } |
| } |
| #endif // CONFIG_MF_HOLE_FILL_ALWAYS_ENABLE |
| } |
| |
| static void subtract_average_c(uint16_t *src, int16_t *dst, int width, |
| int height, int round_offset, int num_pel_log2) { |
| int sum = round_offset; |
| const uint16_t *recon = src; |
| for (int j = 0; j < height; ++j) { |
| for (int i = 0; i < width; ++i) { |
| sum += recon[i]; |
| } |
| recon += CFL_BUF_LINE; |
| } |
| const int avg = sum / num_pel_log2; |
| for (int j = 0; j < height; ++j) { |
| for (int i = 0; i < width; ++i) { |
| dst[i] = src[i] - avg; |
| src[i] = avg; |
| } |
| src += CFL_BUF_LINE; |
| dst += CFL_BUF_LINE; |
| } |
| } |
| |
| static int64_t compute_sad(const uint16_t *src, uint16_t *src2, int width, |
| int height, int round_offset, int src2_stride) { |
| int sad = round_offset; |
| for (int j = 0; j < height; ++j) { |
| for (int i = 0; i < width; ++i) { |
| sad += abs(src[i] - src2[i]); |
| } |
| src += CFL_BUF_LINE; |
| src2 += src2_stride; |
| } |
| return sad; |
| } |
| |
| static void cfl_predict_hbd_pre_analysis(const int16_t *ac_buf_q3, |
| uint16_t *dst, int dst_stride, |
| int alpha_q3, int bit_depth, int width, |
| int height) { |
| for (int j = 0; j < height; ++j) { |
| for (int i = 0; i < width; ++i) { |
| dst[i] = clip_pixel_highbd( |
| get_scaled_luma_q0(alpha_q3, ac_buf_q3[i]) + dst[i], bit_depth); |
| } |
| dst += dst_stride; |
| ac_buf_q3 += CFL_BUF_LINE; |
| } |
| } |
| |
| static void cfl_predict_hbd_dc(const uint16_t *src, uint16_t *dst, |
| int src_stride, int width, int height) { |
| int dc_val = 0; |
| const uint16_t *chroma = src; |
| for (int i = 0; i < width; ++i) { |
| dc_val += src[i]; |
| } |
| |
| chroma += src_stride; |
| for (int j = 0; j < height; ++j) { |
| dc_val += chroma[-1]; |
| chroma += src_stride; |
| } |
| |
| dc_val = dc_val / (width + height); |
| for (int j = 0; j < height; ++j) { |
| for (int i = 0; i < width; ++i) { |
| dst[i] = dc_val; |
| } |
| dst += CFL_BUF_LINE; |
| } |
| } |
| |
| static void cfl_luma_subsampling_420_hbd_c(const uint16_t *input, |
| int input_stride, |
| uint16_t *output_q3, int width, |
| int height) { |
| for (int j = 0; j < height; j += 2) { |
| for (int i = 0; i < width; i += 2) { |
| const int bot = i + input_stride; |
| output_q3[i >> 1] = |
| (input[i] + input[i + 1] + input[bot] + input[bot + 1]) << 1; |
| } |
| input += input_stride << 1; |
| output_q3 += CFL_BUF_LINE; |
| } |
| } |
| |
| void av1_set_downsample_filter_options(AV1_COMP *cpi) { |
| AV1_COMMON *cm = &cpi->common; |
| const uint16_t *src = cpi->unfiltered_source->y_buffer; |
| uint16_t *src_chroma_u = cpi->unfiltered_source->u_buffer; |
| uint16_t *src_chroma_v = cpi->unfiltered_source->v_buffer; |
| assert(src != NULL); |
| const int stride = cpi->unfiltered_source->y_stride; |
| const int width = cpi->unfiltered_source->y_width; |
| const int height = cpi->unfiltered_source->y_height; |
| const int bd = cm->seq_params.bit_depth; |
| |
| const int chroma_stride = cpi->unfiltered_source->uv_stride; |
| const int subsampling_x = cpi->unfiltered_source->subsampling_x; |
| const int subsampling_y = cpi->unfiltered_source->subsampling_y; |
| |
| if (subsampling_x == 0 && subsampling_y == 0) { |
| cm->seq_params.cfl_ds_filter_index = |
| 0; // For 4:4:4 chroma format, downsampling filter is not used. There |
| // is a redundant that the filter index is still signalled for |
| // 4:4:4. Should we remove the index signalling for 4:4:4 with this |
| // MR? |
| return; |
| } |
| if (cpi->oxcf.tool_cfg.select_cfl_ds_filter < 3) { |
| cm->seq_params.cfl_ds_filter_index = |
| cpi->oxcf.tool_cfg.select_cfl_ds_filter; |
| return; |
| } |
| const int blk_w = 16; |
| const int blk_h = 16; |
| |
| uint16_t recon_buf_q3[CFL_BUF_SQUARE]; |
| uint16_t dc_buf_q3[CFL_BUF_SQUARE]; |
| // Q3 AC contributions (reconstructed luma pixels - tx block avg) |
| int16_t ac_buf_q3[CFL_BUF_SQUARE]; |
| int64_t cost[3] = { 0, 0, 0 }; |
| for (int filter_type = 0; filter_type < 3; ++filter_type) { |
| for (int comp = 0; comp < 2; comp++) { |
| for (int r = 2; r + blk_h <= height - 2; r += blk_h) { |
| for (int c = 2; c + blk_w <= width - 2; c += blk_w) { |
| const uint16_t *const this_src = src + r * stride + c; |
| uint16_t *this_src_chroma = src_chroma_u + |
| (r >> subsampling_y) * chroma_stride + |
| (c >> subsampling_x); |
| if (comp) { |
| this_src_chroma = src_chroma_v + |
| (r >> subsampling_y) * chroma_stride + |
| (c >> subsampling_x); |
| } |
| |
| int alpha = 0; |
| if (subsampling_x == 1 && subsampling_y == 0) { |
| cfl_adaptive_luma_subsampling_422_hbd_c( |
| this_src, stride, recon_buf_q3, blk_w, blk_h, filter_type); |
| } else if (filter_type == 1) { |
| cfl_luma_subsampling_420_hbd_121_c(this_src, stride, recon_buf_q3, |
| blk_w, blk_h); |
| } else if (filter_type == 2) { |
| cfl_luma_subsampling_420_hbd_colocated(this_src, stride, |
| recon_buf_q3, blk_w, blk_h); |
| } else { |
| cfl_luma_subsampling_420_hbd_c(this_src, stride, recon_buf_q3, |
| blk_w, blk_h); |
| } |
| cfl_derive_block_implicit_scaling_factor( |
| recon_buf_q3, this_src_chroma, blk_w >> subsampling_x, |
| blk_h >> subsampling_y, CFL_BUF_LINE, chroma_stride, &alpha); |
| subtract_average_c( |
| recon_buf_q3, ac_buf_q3, blk_w >> subsampling_x, |
| blk_h >> subsampling_y, 4, |
| (blk_w >> subsampling_x) * (blk_h >> subsampling_y)); |
| cfl_predict_hbd_dc(this_src_chroma - chroma_stride, dc_buf_q3, |
| chroma_stride, blk_w >> subsampling_x, |
| blk_h >> subsampling_y); |
| cfl_predict_hbd_pre_analysis(ac_buf_q3, dc_buf_q3, CFL_BUF_LINE, |
| alpha, bd, blk_w >> subsampling_x, |
| blk_h >> subsampling_y); |
| int64_t filter_cost = |
| compute_sad(dc_buf_q3, this_src_chroma, blk_w >> 1, blk_h >> 1, 2, |
| chroma_stride); |
| cost[filter_type] = cost[filter_type] + filter_cost; |
| } |
| } |
| } |
| } |
| int64_t min_cost = INT64_MAX; |
| for (int i = 0; i < 3; ++i) { |
| if (cost[i] < min_cost) { |
| min_cost = cost[i]; |
| cm->seq_params.cfl_ds_filter_index = i; |
| } |
| } |
| } |
| |
| void av1_set_screen_content_options(AV1_COMP *cpi, FeatureFlags *features) { |
| const AV1_COMMON *const cm = &cpi->common; |
| #if !CONFIG_ENABLE_IBC_NAT |
| if (cm->seq_params.force_screen_content_tools != 2) { |
| features->allow_screen_content_tools = features->allow_intrabc = |
| cm->seq_params.force_screen_content_tools; |
| return; |
| } |
| |
| if (cpi->oxcf.tune_cfg.content == AOM_CONTENT_SCREEN) { |
| features->allow_screen_content_tools = features->allow_intrabc = 1; |
| return; |
| } |
| #endif // !CONFIG_ENABLE_IBC_NAT |
| // Estimate if the source frame is screen content, based on the portion of |
| // blocks that have few luma colors. |
| const uint16_t *src = cpi->unfiltered_source->y_buffer; |
| assert(src != NULL); |
| const int stride = cpi->unfiltered_source->y_stride; |
| const int width = cpi->unfiltered_source->y_width; |
| const int height = cpi->unfiltered_source->y_height; |
| const int bd = cm->seq_params.bit_depth; |
| const int blk_w = 16; |
| const int blk_h = 16; |
| // These threshold values are selected experimentally. |
| const int color_thresh = 4; |
| const unsigned int var_thresh = 0; |
| // Counts of blocks with no more than color_thresh colors. |
| int counts_1 = 0; |
| // Counts of blocks with no more than color_thresh colors and variance larger |
| // than var_thresh. |
| int counts_2 = 0; |
| |
| for (int r = 0; r + blk_h <= height; r += blk_h) { |
| for (int c = 0; c + blk_w <= width; c += blk_w) { |
| int count_buf[1 << 8]; // Maximum (1 << 8) bins for hbd path. |
| const uint16_t *const this_src = src + r * stride + c; |
| int n_colors; |
| av1_count_colors_highbd(this_src, stride, blk_w, blk_h, bd, NULL, |
| count_buf, &n_colors, NULL); |
| if (n_colors > 1 && n_colors <= color_thresh) { |
| ++counts_1; |
| struct buf_2d buf; |
| buf.stride = stride; |
| buf.buf = (uint16_t *)this_src; |
| const unsigned int var = |
| av1_high_get_sby_perpixel_variance(cpi, &buf, BLOCK_16X16, bd); |
| if (var > var_thresh) ++counts_2; |
| } |
| } |
| } |
| |
| const int col_factor = 11; |
| const int var_factor = 12; |
| |
| // The threshold values are selected experimentally. |
| features->allow_screen_content_tools = |
| counts_1 * blk_h * blk_w * col_factor > width * height; |
| // IntraBC would force loop filters off, so we use more strict rules that also |
| // requires that the block has high variance. |
| features->allow_intrabc = |
| features->allow_screen_content_tools && |
| counts_2 * blk_h * blk_w * var_factor > width * height; |
| |
| #if CONFIG_ENABLE_IBC_NAT |
| features->is_scc_content_by_detector = |
| features->allow_screen_content_tools && |
| counts_2 * blk_h * blk_w * var_factor > width * height; |
| |
| if (cpi->oxcf.tune_cfg.content == AOM_CONTENT_SCREEN) { |
| features->allow_screen_content_tools = features->allow_intrabc = |
| features->is_scc_content_by_detector = 1; |
| return; |
| } |
| |
| if (cm->seq_params.force_screen_content_tools > 0) { |
| features->allow_intrabc = 1; |
| return; |
| } |
| if (cm->seq_params.force_screen_content_tools != 2) { |
| features->allow_screen_content_tools = features->allow_intrabc = |
| cm->seq_params.force_screen_content_tools; |
| return; |
| } |
| #endif // CONFIG_ENABLE_IBC_NAT |
| |
| if (frame_is_intra_only(cm) && cm->seq_params.enable_tip) { |
| set_hole_fill_decision(cpi, width, height, blk_w, blk_h, counts_1, |
| counts_2); |
| } |
| } |
| |
| // Function pointer to search site config initialization |
| // of different search method functions. |
| typedef void (*av1_init_search_site_config)(search_site_config *cfg, |
| int stride); |
| |
| av1_init_search_site_config |
| av1_init_motion_compensation[NUM_DISTINCT_SEARCH_METHODS] = { |
| av1_init_dsmotion_compensation, av1_init_motion_compensation_nstep, |
| av1_init_motion_compensation_hex, av1_init_motion_compensation_bigdia, |
| av1_init_motion_compensation_square |
| }; |
| |
| static void init_motion_estimation(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| MotionVectorSearchParams *const mv_search_params = &cpi->mv_search_params; |
| const int y_stride = cpi->scaled_source.y_stride; |
| const int y_stride_src = ((cpi->oxcf.frm_dim_cfg.width != cm->width || |
| cpi->oxcf.frm_dim_cfg.height != cm->height) || |
| av1_superres_scaled(cm)) |
| ? y_stride |
| : cpi->lookahead->buf->img.y_stride; |
| int fpf_y_stride = cm->cur_frame != NULL ? cm->cur_frame->buf.y_stride |
| : cpi->scaled_source.y_stride; |
| |
| // Update if search_site_cfg is uninitialized or the current frame has a new |
| // stride |
| const int should_update = |
| !mv_search_params->search_site_cfg[SS_CFG_SRC][DIAMOND].stride || |
| !mv_search_params->search_site_cfg[SS_CFG_LOOKAHEAD][DIAMOND].stride || |
| (y_stride != |
| mv_search_params->search_site_cfg[SS_CFG_SRC][DIAMOND].stride); |
| |
| if (!should_update) { |
| return; |
| } |
| |
| // Initialization of search_site_cfg for NUM_DISTINCT_SEARCH_METHODS. |
| for (SEARCH_METHODS i = DIAMOND; i < NUM_DISTINCT_SEARCH_METHODS; i++) { |
| av1_init_motion_compensation[i]( |
| &mv_search_params->search_site_cfg[SS_CFG_SRC][i], y_stride); |
| av1_init_motion_compensation[i]( |
| &mv_search_params->search_site_cfg[SS_CFG_LOOKAHEAD][i], y_stride_src); |
| } |
| |
| // First pass search site config initialization. |
| av1_init_motion_fpf(&mv_search_params->search_site_cfg[SS_CFG_FPF][DIAMOND], |
| fpf_y_stride); |
| for (SEARCH_METHODS i = NSTEP; i < NUM_DISTINCT_SEARCH_METHODS; i++) { |
| memcpy(&mv_search_params->search_site_cfg[SS_CFG_FPF][i], |
| &mv_search_params->search_site_cfg[SS_CFG_FPF][DIAMOND], |
| sizeof(search_site_config)); |
| } |
| } |
| |
| #define COUPLED_CHROMA_FROM_LUMA_RESTORATION 0 |
| |
| static void init_ref_frame_bufs(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| int i; |
| BufferPool *const pool = cm->buffer_pool; |
| cm->cur_frame = NULL; |
| for (i = 0; i < REF_FRAMES; ++i) { |
| cm->ref_frame_map[i] = NULL; |
| } |
| for (i = 0; i < FRAME_BUFFERS; ++i) { |
| pool->frame_bufs[i].ref_count = 0; |
| } |
| } |
| |
| void av1_check_initial_width(AV1_COMP *cpi, int subsampling_x, |
| int subsampling_y) { |
| AV1_COMMON *const cm = &cpi->common; |
| SequenceHeader *const seq_params = &cm->seq_params; |
| InitialDimensions *const initial_dimensions = &cpi->initial_dimensions; |
| |
| if (!initial_dimensions->width || |
| seq_params->subsampling_x != subsampling_x || |
| seq_params->subsampling_y != subsampling_y) { |
| seq_params->subsampling_x = subsampling_x; |
| seq_params->subsampling_y = subsampling_y; |
| |
| av1_set_speed_features_framesize_independent(cpi, cpi->oxcf.speed); |
| av1_set_speed_features_framesize_dependent(cpi, cpi->oxcf.speed); |
| |
| if (!is_stat_generation_stage(cpi)) { |
| alloc_altref_frame_buffer(cpi); |
| alloc_util_frame_buffers(cpi); |
| } |
| init_ref_frame_bufs(cpi); |
| |
| init_motion_estimation(cpi); // TODO(agrange) This can be removed. |
| |
| initial_dimensions->width = cm->width; |
| initial_dimensions->height = cm->height; |
| cpi->initial_mbs = cm->mi_params.MBs; |
| } |
| } |
| |
| // Returns 1 if the assigned width or height was <= 0. |
| int av1_set_size_literal(AV1_COMP *cpi, int width, int height) { |
| AV1_COMMON *cm = &cpi->common; |
| av1_check_initial_width(cpi, cm->seq_params.subsampling_x, |
| cm->seq_params.subsampling_y); |
| |
| if (width <= 0 || height <= 0) return 1; |
| |
| cm->width = width; |
| cm->height = height; |
| |
| const BLOCK_SIZE old_sb_size = cm->sb_size; |
| const BLOCK_SIZE sb_size = av1_select_sb_size(cpi); |
| if (!cpi->seq_params_locked) { |
| set_sb_size(cm, sb_size); |
| } else { |
| av1_set_frame_sb_size(cm, sb_size); |
| } |
| cpi->td.sb_size = cm->sb_size; |
| |
| if (cpi->alloc_width && cpi->alloc_height) { |
| if (old_sb_size != cm->sb_size) { |
| // Reallocate sb_size-dependent buffers if the sb_size has changed. |
| reallocate_sb_size_dependent_buffers(cpi); |
| } else if (cm->width > cpi->alloc_width || cm->height > cpi->alloc_height) { |
| av1_free_context_buffers(cm); |
| av1_free_shared_coeff_buffer(&cpi->td.shared_coeff_buf); |
| av1_free_sms_tree(&cpi->td); |
| #if CONFIG_EXT_RECUR_PARTITIONS |
| av1_free_sms_bufs(&cpi->td); |
| #endif // CONFIG_EXT_RECUR_PARTITIONS |
| av1_free_pmc(cpi->td.firstpass_ctx, av1_num_planes(cm)); |
| cpi->td.firstpass_ctx = NULL; |
| alloc_compressor_data(cpi); |
| realloc_segmentation_maps(cpi); |
| } |
| } |
| update_frame_size(cpi); |
| |
| return 0; |
| } |
| |
| static void setup_tip_frame_size(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| RefCntBuffer *tip_frame = cm->tip_ref.tip_frame; |
| // Reset the frame pointers to the current frame size. |
| if (aom_realloc_frame_buffer( |
| &tip_frame->buf, cm->width, cm->height, cm->seq_params.subsampling_x, |
| cm->seq_params.subsampling_y, cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, NULL, NULL, NULL, false)) { |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate frame buffer"); |
| } |
| |
| tip_frame->frame_type = INTER_FRAME; |
| |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| tip_frame = cm->tip_ref.tmp_tip_frame; |
| if (aom_realloc_frame_buffer( |
| &tip_frame->buf, cm->width, cm->height, cm->seq_params.subsampling_x, |
| cm->seq_params.subsampling_y, cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, NULL, NULL, NULL, false)) { |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate frame buffer"); |
| } |
| tip_frame->frame_type = INTER_FRAME; |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| } |
| |
| void av1_set_frame_size(AV1_COMP *cpi, int width, int height) { |
| AV1_COMMON *const cm = &cpi->common; |
| const SequenceHeader *const seq_params = &cm->seq_params; |
| const int num_planes = av1_num_planes(cm); |
| MACROBLOCKD *const xd = &cpi->td.mb.e_mbd; |
| int ref_frame; |
| |
| if (width != cm->width || height != cm->height) { |
| // There has been a change in the encoded frame size |
| av1_set_size_literal(cpi, width, height); |
| // Recalculate 'all_lossless' in case super-resolution was (un)selected. |
| cm->features.all_lossless = |
| cm->features.coded_lossless && !av1_superres_scaled(cm); |
| |
| av1_noise_estimate_init(&cpi->noise_estimate, cm->width, cm->height); |
| } |
| set_mv_search_params(cpi); |
| |
| if (is_stat_consumption_stage(cpi)) { |
| av1_set_target_rate(cpi, cm->width, cm->height); |
| } |
| |
| alloc_frame_mvs(cm, cm->cur_frame); |
| |
| // Allocate above context buffers |
| CommonContexts *const above_contexts = &cm->above_contexts; |
| if (above_contexts->num_planes < av1_num_planes(cm) || |
| above_contexts->num_mi_cols < cm->mi_params.mi_cols || |
| above_contexts->num_tile_rows < cm->tiles.rows) { |
| av1_free_above_context_buffers(above_contexts); |
| if (av1_alloc_above_context_buffers(above_contexts, cm->tiles.rows, |
| cm->mi_params.mi_cols, |
| av1_num_planes(cm))) |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate context buffers"); |
| } |
| |
| // Reset the frame pointers to the current frame size. |
| if (aom_realloc_frame_buffer( |
| &cm->cur_frame->buf, cm->width, cm->height, seq_params->subsampling_x, |
| seq_params->subsampling_y, cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, NULL, NULL, NULL, cpi->alloc_pyramid)) |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate frame buffer"); |
| |
| const int frame_width = cm->superres_upscaled_width; |
| const int frame_height = cm->superres_upscaled_height; |
| set_restoration_unit_size(frame_width, frame_height, |
| seq_params->subsampling_x, |
| seq_params->subsampling_y, cm->rst_info); |
| for (int i = 0; i < num_planes; ++i) |
| cm->rst_info[i].frame_restoration_type = RESTORE_NONE; |
| |
| av1_alloc_restoration_buffers(cm); |
| if (!is_stat_generation_stage(cpi)) alloc_util_frame_buffers(cpi); |
| init_motion_estimation(cpi); |
| |
| for (ref_frame = 0; ref_frame < INTER_REFS_PER_FRAME; ++ref_frame) { |
| RefCntBuffer *const buf = get_ref_frame_buf(cm, ref_frame); |
| if (buf != NULL) { |
| struct scale_factors *sf = get_ref_scale_factors(cm, ref_frame); |
| av1_setup_scale_factors_for_frame(sf, buf->buf.y_crop_width, |
| buf->buf.y_crop_height, cm->width, |
| cm->height); |
| if (av1_is_scaled(sf)) aom_extend_frame_borders(&buf->buf, num_planes); |
| } |
| } |
| |
| if (!is_stat_generation_stage(cpi) && cm->seq_params.enable_tip) { |
| RefCntBuffer *buf = get_ref_frame_buf(cm, TIP_FRAME); |
| if (buf == NULL || (buf->buf.y_crop_width != cm->width || |
| buf->buf.y_crop_height != cm->height)) { |
| setup_tip_frame_size(cpi); |
| buf = get_ref_frame_buf(cm, TIP_FRAME); |
| } |
| if (buf != NULL) { |
| struct scale_factors *sf = get_ref_scale_factors(cm, TIP_FRAME); |
| av1_setup_scale_factors_for_frame(sf, buf->buf.y_crop_width, |
| buf->buf.y_crop_height, cm->width, |
| cm->height); |
| if (av1_is_scaled(sf)) aom_extend_frame_borders(&buf->buf, num_planes); |
| } |
| } |
| |
| av1_setup_scale_factors_for_frame(&cm->sf_identity, cm->width, cm->height, |
| cm->width, cm->height); |
| |
| set_ref_ptrs(cm, xd, 0, 0); |
| } |
| |
| /*!\brief Select and apply cdef filters and switchable restoration filters |
| * |
| * \ingroup high_level_algo |
| */ |
| static void cdef_restoration_frame(AV1_COMP *cpi, AV1_COMMON *cm, |
| MACROBLOCKD *xd, int use_restoration, |
| int use_cdef) { |
| uint16_t *rec_uv[CCSO_NUM_COMPONENTS]; |
| uint16_t *org_uv[CCSO_NUM_COMPONENTS]; |
| uint16_t *ext_rec_y = NULL; |
| uint16_t *ref_buffer; |
| const YV12_BUFFER_CONFIG *ref = cpi->source; |
| int ref_stride; |
| const int use_ccso = !cm->features.coded_lossless && !cm->tiles.large_scale && |
| cm->seq_params.enable_ccso; |
| const int num_planes = av1_num_planes(cm); |
| av1_setup_dst_planes(xd->plane, &cm->cur_frame->buf, 0, 0, 0, num_planes, |
| NULL); |
| const int ccso_stride = xd->plane[0].dst.width; |
| const int ccso_stride_ext = xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1); |
| for (int pli = 0; pli < num_planes; pli++) { |
| rec_uv[pli] = aom_malloc(sizeof(*rec_uv[pli]) * xd->plane[0].dst.height * |
| ccso_stride); |
| org_uv[pli] = aom_malloc(sizeof(*org_uv[pli]) * xd->plane[0].dst.height * |
| ccso_stride); |
| } |
| if (use_ccso) { |
| ext_rec_y = |
| aom_malloc(sizeof(*ext_rec_y) * |
| (xd->plane[0].dst.height + (CCSO_PADDING_SIZE << 1)) * |
| (xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1))); |
| for (int pli = 0; pli < 1; pli++) { |
| const int pic_height = xd->plane[pli].dst.height; |
| const int pic_width = xd->plane[pli].dst.width; |
| const int dst_stride = xd->plane[pli].dst.stride; |
| for (int r = 0; r < pic_height; ++r) { |
| for (int c = 0; c < pic_width; ++c) { |
| if (pli == 0) |
| ext_rec_y[(r + CCSO_PADDING_SIZE) * ccso_stride_ext + c + |
| CCSO_PADDING_SIZE] = |
| xd->plane[pli].dst.buf[r * dst_stride + c]; |
| } |
| } |
| } |
| extend_ccso_border(ext_rec_y, CCSO_PADDING_SIZE, xd); |
| } |
| |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| const int num_workers = mt_info->num_workers; |
| if (use_restoration) |
| av1_loop_restoration_save_boundary_lines(&cm->cur_frame->buf, cm, 0); |
| |
| if (use_cdef) { |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, cdef_time); |
| #endif |
| // Find CDEF parameters |
| av1_cdef_search(&cm->cur_frame->buf, cpi->source, cm, xd, |
| cpi->sf.lpf_sf.cdef_pick_method, cpi->td.mb.rdmult); |
| |
| // Apply the filter |
| #if CONFIG_FIX_CDEF_SYNTAX |
| if (cm->cdef_info.cdef_frame_enable) |
| #endif // CONFIG_FIX_CDEF_SYNTAX |
| av1_cdef_frame(&cm->cur_frame->buf, cm, xd); |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, cdef_time); |
| #endif |
| } else { |
| #if CONFIG_FIX_CDEF_SYNTAX |
| cm->cdef_info.cdef_frame_enable = 0; |
| #else |
| cm->cdef_info.cdef_bits = 0; |
| cm->cdef_info.cdef_strengths[0] = 0; |
| cm->cdef_info.nb_cdef_strengths = 1; |
| cm->cdef_info.cdef_uv_strengths[0] = 0; |
| #endif // CONFIG_FIX_CDEF_SYNTAX |
| } |
| |
| if (use_ccso) { |
| av1_setup_dst_planes(xd->plane, &cm->cur_frame->buf, 0, 0, 0, num_planes, |
| NULL); |
| // Reading original and reconstructed chroma samples as input |
| for (int pli = 0; pli < num_planes; pli++) { |
| const int pic_height = xd->plane[pli].dst.height; |
| const int pic_width = xd->plane[pli].dst.width; |
| const int dst_stride = xd->plane[pli].dst.stride; |
| switch (pli) { |
| case 0: |
| ref_buffer = ref->y_buffer; |
| ref_stride = ref->y_stride; |
| break; |
| case 1: |
| ref_buffer = ref->u_buffer; |
| ref_stride = ref->uv_stride; |
| break; |
| case 2: |
| ref_buffer = ref->v_buffer; |
| ref_stride = ref->uv_stride; |
| break; |
| default: ref_stride = 0; |
| } |
| for (int r = 0; r < pic_height; ++r) { |
| for (int c = 0; c < pic_width; ++c) { |
| rec_uv[pli][r * ccso_stride + c] = |
| xd->plane[pli].dst.buf[r * dst_stride + c]; |
| org_uv[pli][r * ccso_stride + c] = ref_buffer[r * ref_stride + c]; |
| } |
| } |
| } |
| ccso_search(cm, xd, cpi->td.mb.rdmult, ext_rec_y, rec_uv, org_uv); |
| ccso_frame(&cm->cur_frame->buf, cm, xd, ext_rec_y); |
| aom_free(ext_rec_y); |
| } |
| for (int pli = 0; pli < num_planes; pli++) { |
| aom_free(rec_uv[pli]); |
| aom_free(org_uv[pli]); |
| } |
| |
| av1_superres_post_encode(cpi); |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, loop_restoration_time); |
| #endif |
| |
| if (use_restoration) { |
| av1_loop_restoration_save_boundary_lines(&cm->cur_frame->buf, cm, 1); |
| av1_pick_filter_restoration(cpi->source, cpi); |
| if (cm->rst_info[0].frame_restoration_type != RESTORE_NONE || |
| cm->rst_info[1].frame_restoration_type != RESTORE_NONE || |
| cm->rst_info[2].frame_restoration_type != RESTORE_NONE) { |
| if (num_workers > 1) |
| av1_loop_restoration_filter_frame_mt( |
| &cm->cur_frame->buf, cm, 0, mt_info->workers, num_workers, |
| &mt_info->lr_row_sync, &cpi->lr_ctxt); |
| else |
| av1_loop_restoration_filter_frame(&cm->cur_frame->buf, cm, 0, |
| &cpi->lr_ctxt); |
| } |
| } else { |
| cm->rst_info[0].frame_restoration_type = RESTORE_NONE; |
| cm->rst_info[1].frame_restoration_type = RESTORE_NONE; |
| cm->rst_info[2].frame_restoration_type = RESTORE_NONE; |
| } |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, loop_restoration_time); |
| #endif |
| } |
| |
| /*!\brief Select and apply in-loop deblocking filters, cdef filters, and |
| * restoration filters |
| * |
| * \ingroup high_level_algo |
| */ |
| static void loopfilter_frame(AV1_COMP *cpi, AV1_COMMON *cm) { |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| const int num_workers = mt_info->num_workers; |
| const int num_planes = av1_num_planes(cm); |
| MACROBLOCKD *xd = &cpi->td.mb.e_mbd; |
| |
| assert(IMPLIES(is_lossless_requested(&cpi->oxcf.rc_cfg), |
| cm->features.coded_lossless && cm->features.all_lossless)); |
| |
| const int use_loopfilter = !cm->features.coded_lossless && |
| !cm->tiles.large_scale && |
| cpi->oxcf.tool_cfg.enable_deblocking; |
| const int use_cdef = cm->seq_params.enable_cdef && |
| !cm->features.coded_lossless && !cm->tiles.large_scale; |
| const int use_restoration = cm->seq_params.enable_restoration && |
| !cm->features.all_lossless && |
| !cm->tiles.large_scale; |
| |
| struct loopfilter *lf = &cm->lf; |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, loop_filter_time); |
| #endif |
| if (use_loopfilter) { |
| aom_clear_system_state(); |
| av1_pick_filter_level(cpi->source, cpi, cpi->sf.lpf_sf.lpf_pick); |
| } else { |
| lf->filter_level[0] = 0; |
| lf->filter_level[1] = 0; |
| } |
| |
| if (lf->filter_level[0] || lf->filter_level[1]) { |
| if (num_workers > 1 |
| #if CONFIG_LF_SUB_PU |
| && !cm->features.allow_lf_sub_pu |
| #endif // CONFIG_LF_SUB_PU |
| ) |
| av1_loop_filter_frame_mt(&cm->cur_frame->buf, cm, xd, 0, num_planes, 0, |
| #if CONFIG_LPF_MASK |
| 0, |
| #endif |
| mt_info->workers, num_workers, |
| &mt_info->lf_row_sync); |
| else |
| av1_loop_filter_frame(&cm->cur_frame->buf, cm, xd, |
| #if CONFIG_LPF_MASK |
| 0, |
| #endif |
| 0, num_planes, 0); |
| } |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, loop_filter_time); |
| #endif |
| |
| cdef_restoration_frame(cpi, cm, xd, use_restoration, use_cdef); |
| } |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| /*!\brief If the error resilience mode is turned on in the encoding, for frames |
| * following the error resilient frame, use the last encoded frame as the |
| * primary reference frame. |
| * |
| * \ingroup high_level_algo |
| */ |
| static void set_primary_ref_frame_for_error_resilient(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| const int intra_only = cm->current_frame.frame_type == KEY_FRAME || |
| cm->current_frame.frame_type == INTRA_ONLY_FRAME; |
| if (intra_only) { |
| cpi->error_resilient_frame_seen = 0; |
| } else if (cm->features.error_resilient_mode) { |
| cpi->error_resilient_frame_seen = 1; |
| } |
| |
| // The error resilient frame always use PRIMARY_REF_NONE. This is already |
| // handled. |
| if (cm->features.error_resilient_mode) return; |
| if (cm->features.primary_ref_frame == PRIMARY_REF_NONE) return; |
| |
| if (cpi->error_resilient_frame_seen) { |
| cm->features.primary_ref_frame = PRIMARY_REF_NONE; |
| |
| // Find the last encoded frame, and use it as the primary ref frame. |
| const int n_refs = cm->ref_frames_info.num_total_refs; |
| const RefFrameMapPair *ref_frame_map_pairs = cm->ref_frame_map_pairs; |
| int i; |
| |
| for (i = 0; i < n_refs; i++) { |
| // Get reference frame buffer |
| RefFrameMapPair cur_ref = |
| ref_frame_map_pairs[get_ref_frame_map_idx(cm, i)]; |
| if (cur_ref.disp_order == -1) continue; |
| if (cur_ref.frame_type != INTER_FRAME) continue; |
| |
| if (cur_ref.disp_order == cpi->last_encoded_frame_order_hint) { |
| cm->features.primary_ref_frame = i; |
| break; |
| } |
| } |
| cpi->signal_primary_ref_frame = cm->features.primary_ref_frame != |
| cm->features.derived_primary_ref_frame; |
| if (cm->features.primary_ref_frame == PRIMARY_REF_NONE) |
| av1_setup_past_independence(cm); |
| } |
| } |
| |
| /*!\brief Set the primary reference frame before encoding a frame. |
| * |
| * \ingroup high_level_algo |
| */ |
| static void set_primary_ref_frame(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| cpi->signal_primary_ref_frame = 0; |
| // Got the derived_primary_ref_frame. |
| cm->features.derived_primary_ref_frame = choose_primary_ref_frame(cm); |
| // The primary_ref_frame can be set to other refs other than the derived |
| // one. If that is needed, disable primary_ref_frame search. |
| cm->features.primary_ref_frame = cm->features.derived_primary_ref_frame; |
| if (cpi->ext_flags.use_primary_ref_none) { |
| cm->features.primary_ref_frame = PRIMARY_REF_NONE; |
| } |
| |
| // Set primary reference frame while the error resilience mode is turned on. |
| set_primary_ref_frame_for_error_resilient(cpi); |
| |
| if (cm->features.primary_ref_frame == PRIMARY_REF_NONE && |
| cm->features.derived_primary_ref_frame != PRIMARY_REF_NONE) { |
| cm->features.derived_primary_ref_frame = PRIMARY_REF_NONE; |
| cpi->signal_primary_ref_frame = 1; |
| } |
| } |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| /*!\brief Encode a frame without the recode loop, usually used in one-pass |
| * encoding. |
| * |
| * \ingroup high_level_algo |
| * |
| * \param[in] cpi Top-level encoder structure |
| * |
| * \return Returns a value to indicate if the encoding is done successfully. |
| * \retval #AOM_CODEC_OK |
| * \retval #AOM_CODEC_ERROR |
| */ |
| static int encode_without_recode(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| const QuantizationCfg *const q_cfg = &cpi->oxcf.q_cfg; |
| ResizePendingParams *const resize_pending_params = |
| &cpi->resize_pending_params; |
| const int resize_pending = |
| (resize_pending_params->width && resize_pending_params->height && |
| (cpi->common.width != resize_pending_params->width || |
| cpi->common.height != resize_pending_params->height)); |
| |
| int top_index = 0, bottom_index = 0, q = 0; |
| YV12_BUFFER_CONFIG *unscaled = cpi->unscaled_source; |
| InterpFilter filter_scaler = EIGHTTAP_SMOOTH; |
| int phase_scaler = 0; |
| |
| set_size_independent_vars(cpi); |
| av1_setup_frame_size(cpi); |
| av1_set_size_dependent_vars(cpi, &q, &bottom_index, &top_index); |
| |
| { |
| phase_scaler = 8; |
| // 2:1 scaling. |
| if ((cm->width << 1) == unscaled->y_crop_width && |
| (cm->height << 1) == unscaled->y_crop_height) { |
| filter_scaler = BILINEAR; |
| // For lower resolutions use eighttap_smooth. |
| if (cm->width * cm->height <= 320 * 180) filter_scaler = EIGHTTAP_SMOOTH; |
| } else if ((cm->width << 2) == unscaled->y_crop_width && |
| (cm->height << 2) == unscaled->y_crop_height) { |
| // 4:1 scaling. |
| filter_scaler = EIGHTTAP_SMOOTH; |
| } else if ((cm->width << 2) == 3 * unscaled->y_crop_width && |
| (cm->height << 2) == 3 * unscaled->y_crop_height) { |
| // 4:3 scaling. |
| // TODO(jianj): Neon optimization for 4:3 scaling for EIGHTTAP has issues. |
| // See aomedia:2766. |
| filter_scaler = BILINEAR; |
| } |
| } |
| |
| if (cm->current_frame.frame_type == KEY_FRAME) copy_frame_prob_info(cpi); |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| printf("\n Encoding a frame:"); |
| #endif |
| |
| aom_clear_system_state(); |
| |
| cpi->source = av1_scale_if_required(cm, unscaled, &cpi->scaled_source, |
| filter_scaler, phase_scaler, true, false); |
| if (frame_is_intra_only(cm) || resize_pending != 0) { |
| memset(cpi->consec_zero_mv, 0, |
| ((cm->mi_params.mi_rows * cm->mi_params.mi_cols) >> 2) * |
| sizeof(*cpi->consec_zero_mv)); |
| } |
| |
| if (cpi->unscaled_last_source != NULL) { |
| cpi->last_source = av1_scale_if_required( |
| cm, cpi->unscaled_last_source, &cpi->scaled_last_source, filter_scaler, |
| phase_scaler, true, false); |
| } |
| |
| // The code below turns across scale references off, which seems unnecessary. |
| // So only enable this based on a speed-feature, and if superes_in_recode is |
| // not allowed. Also consider dropping this segment completely. |
| if (cpi->sf.hl_sf.disable_unequal_scale_refs && |
| !av1_superres_in_recode_allowed(cpi)) { |
| const MV_REFERENCE_FRAME golden_frame = get_best_past_ref_index(cm); |
| const MV_REFERENCE_FRAME altref_frame = get_furthest_future_ref_index(cm); |
| if (golden_frame != NONE_FRAME && |
| cm->ref_frame_flags & (1 << golden_frame)) { |
| const YV12_BUFFER_CONFIG *const ref = |
| get_ref_frame_yv12_buf(cm, golden_frame); |
| if (ref->y_crop_width != cm->width || ref->y_crop_height != cm->height) |
| cm->ref_frame_flags ^= (1 << golden_frame); |
| } |
| if (altref_frame != NONE_FRAME && |
| cm->ref_frame_flags & (1 << altref_frame)) { |
| const YV12_BUFFER_CONFIG *const ref = |
| get_ref_frame_yv12_buf(cm, altref_frame); |
| if (ref->y_crop_width != cm->width || ref->y_crop_height != cm->height) |
| cm->ref_frame_flags ^= (1 << altref_frame); |
| } |
| } |
| |
| // For SVC the inter-layer/spatial prediction is not done for newmv |
| // (zero_mode is forced), and since the scaled references are only |
| // use for newmv search, we can avoid scaling here. |
| if (!frame_is_intra_only(cm)) |
| av1_scale_references(cpi, filter_scaler, phase_scaler, 1); |
| |
| av1_set_quantizer(cm, q_cfg->qm_minlevel, q_cfg->qm_maxlevel, q, |
| q_cfg->enable_chroma_deltaq); |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| set_primary_ref_frame(cpi); |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| av1_set_speed_features_qindex_dependent(cpi, cpi->oxcf.speed); |
| av1_init_quantizer(&cm->seq_params, &cpi->enc_quant_dequant_params, |
| &cm->quant_params); |
| av1_setup_frame(cpi); |
| |
| if (q_cfg->aq_mode == CYCLIC_REFRESH_AQ) { |
| suppress_active_map(cpi); |
| av1_cyclic_refresh_setup(cpi); |
| av1_apply_active_map(cpi); |
| } |
| if (cm->seg.enabled) { |
| if (!cm->seg.update_data && cm->prev_frame) { |
| segfeatures_copy(&cm->seg, &cm->prev_frame->seg); |
| cm->seg.enabled = cm->prev_frame->seg.enabled; |
| } else { |
| av1_calculate_segdata(&cm->seg); |
| } |
| } else { |
| memset(&cm->seg, 0, sizeof(cm->seg)); |
| } |
| segfeatures_copy(&cm->cur_frame->seg, &cm->seg); |
| cm->cur_frame->seg.enabled = cm->seg.enabled; |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, av1_encode_frame_time); |
| #endif |
| |
| // Set the motion vector precision based on mv stats from the last coded |
| // frame. |
| if (!frame_is_intra_only(cm)) { |
| av1_pick_and_set_high_precision_mv(cpi, q); |
| } else { |
| // TODO(chiyotsai@google.com): The frame level mv precision should be set to |
| // MV_SUBPEL_NONE for more accurate intrabc search. But doing this right now |
| // will cause an unwanted STATS_CHANGED. Fix this upstream instead. |
| // av1_set_high_precision_mv(cpi, MV_PRECISION_ONE_PEL); |
| } |
| |
| // transform / motion compensation build reconstruction frame |
| av1_encode_frame(cpi); |
| |
| // Update some stats from cyclic refresh. |
| if (q_cfg->aq_mode == CYCLIC_REFRESH_AQ && !frame_is_intra_only(cm)) |
| av1_cyclic_refresh_postencode(cpi); |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, av1_encode_frame_time); |
| #endif |
| #if CONFIG_INTERNAL_STATS |
| ++cpi->tot_recode_hits; |
| #endif |
| |
| aom_clear_system_state(); |
| |
| return AOM_CODEC_OK; |
| } |
| |
| /*!\brief Recode loop for encoding one frame. the purpose of encoding one frame |
| * for multiple times can be approaching a target bitrate or adjusting the usage |
| * of global motions. |
| * |
| * \ingroup high_level_algo |
| * |
| * \param[in] cpi Top-level encoder structure |
| * \param[in] size Bitstream size |
| * \param[in] dest Bitstream output |
| * |
| * \return Returns a value to indicate if the encoding is done successfully. |
| * \retval #AOM_CODEC_OK |
| * \retval -1 |
| * \retval #AOM_CODEC_ERROR |
| */ |
| static int encode_with_recode_loop(AV1_COMP *cpi, size_t *size, uint8_t *dest) { |
| AV1_COMMON *const cm = &cpi->common; |
| RATE_CONTROL *const rc = &cpi->rc; |
| GlobalMotionInfo *const gm_info = &cpi->gm_info; |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| const QuantizationCfg *const q_cfg = &oxcf->q_cfg; |
| const int allow_recode = (cpi->sf.hl_sf.recode_loop != DISALLOW_RECODE); |
| // Must allow recode if minimum compression ratio is set. |
| assert(IMPLIES(oxcf->rc_cfg.min_cr > 0, allow_recode)); |
| |
| set_size_independent_vars(cpi); |
| |
| av1_setup_frame_size(cpi); |
| |
| if (av1_superres_in_recode_allowed(cpi) && |
| cpi->superres_mode != AOM_SUPERRES_NONE && |
| cm->superres_scale_denominator == SCALE_NUMERATOR) { |
| // Superres mode is currently enabled, but the denominator selected will |
| // disable superres. So no need to continue, as we will go through another |
| // recode loop for full-resolution after this anyway. |
| return -1; |
| } |
| |
| int top_index = 0, bottom_index = 0; |
| int q = 0, q_low = 0, q_high = 0; |
| av1_set_size_dependent_vars(cpi, &q, &bottom_index, &top_index); |
| q_low = bottom_index; |
| q_high = top_index; |
| |
| if (cm->current_frame.frame_type == KEY_FRAME) copy_frame_prob_info(cpi); |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| printf("\n Encoding a frame:"); |
| #endif |
| |
| // Determine whether to use screen content tools using two fast encoding. |
| av1_determine_sc_tools_with_encoding(cpi, q); |
| |
| #if CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| if (cm->features.allow_intrabc) { |
| set_max_bvp_drl_bits(cpi); |
| } |
| #endif |
| |
| #if CONFIG_IBC_SR_EXT |
| if (cm->features.allow_intrabc) { |
| cm->features.allow_global_intrabc = |
| #if CONFIG_ENABLE_IBC_NAT |
| cm->features.is_scc_content_by_detector && |
| #endif // CONFIG_ENABLE_IBC_NAT |
| (oxcf->kf_cfg.enable_intrabc_ext != 2) && frame_is_intra_only(cm); |
| cm->features.allow_local_intrabc = !!oxcf->kf_cfg.enable_intrabc_ext; |
| } else { |
| cm->features.allow_global_intrabc = 0; |
| cm->features.allow_local_intrabc = 0; |
| } |
| #endif // CONFIG_IBC_SR_EXT |
| |
| #if CONFIG_USE_VMAF_RC |
| if (oxcf->tune_cfg.tuning == AOM_TUNE_VMAF_NEG_MAX_GAIN) { |
| av1_vmaf_neg_preprocessing(cpi, cpi->unscaled_source); |
| } |
| #endif |
| |
| // Loop variables |
| int loop = 0; |
| int loop_count = 0; |
| int overshoot_seen = 0; |
| int undershoot_seen = 0; |
| int low_cr_seen = 0; |
| MvSubpelPrecision last_loop_mv_prec = cm->features.fr_mv_precision; |
| do { |
| loop = 0; |
| aom_clear_system_state(); |
| |
| // if frame was scaled calculate global_motion_search again if already |
| // done |
| if (loop_count > 0 && cpi->source && gm_info->search_done) { |
| if (cpi->source->y_crop_width != cm->width || |
| cpi->source->y_crop_height != cm->height) { |
| gm_info->search_done = 0; |
| } |
| } |
| cpi->source = |
| av1_scale_if_required(cm, cpi->unscaled_source, &cpi->scaled_source, |
| EIGHTTAP_REGULAR, 0, false, false); |
| |
| if (cpi->unscaled_last_source != NULL) { |
| cpi->last_source = av1_scale_if_required( |
| cm, cpi->unscaled_last_source, &cpi->scaled_last_source, |
| EIGHTTAP_REGULAR, 0, false, false); |
| } |
| |
| if (!frame_is_intra_only(cm)) { |
| if (loop_count > 0) { |
| release_scaled_references(cpi); |
| } |
| av1_scale_references(cpi, EIGHTTAP_REGULAR, 0, 0); |
| } |
| #if CONFIG_TUNE_VMAF |
| if (oxcf->tune_cfg.tuning >= AOM_TUNE_VMAF_WITH_PREPROCESSING && |
| oxcf->tune_cfg.tuning <= AOM_TUNE_VMAF_NEG_MAX_GAIN) { |
| cpi->vmaf_info.original_qindex = q; |
| q = av1_get_vmaf_base_qindex(cpi, q); |
| } |
| #endif |
| av1_set_quantizer(cm, q_cfg->qm_minlevel, q_cfg->qm_maxlevel, q, |
| q_cfg->enable_chroma_deltaq); |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| set_primary_ref_frame(cpi); |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| av1_set_speed_features_qindex_dependent(cpi, oxcf->speed); |
| av1_init_quantizer(&cm->seq_params, &cpi->enc_quant_dequant_params, |
| &cm->quant_params); |
| |
| // printf("Frame %d/%d: q = %d, frame_type = %d superres_denom = %d\n", |
| // cm->current_frame.frame_number, cm->show_frame, q, |
| // cm->current_frame.frame_type, cm->superres_scale_denominator); |
| |
| if (loop_count == 0) { |
| av1_setup_frame(cpi); |
| } else if (get_primary_ref_frame_buf(cm |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| , |
| cm->features.primary_ref_frame |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| ) == NULL) { |
| // Base q-index may have changed, so we need to assign proper default coef |
| // probs before every iteration. |
| av1_default_coef_probs(cm); |
| av1_setup_frame_contexts(cm); |
| } |
| |
| if (q_cfg->aq_mode == VARIANCE_AQ) { |
| av1_vaq_frame_setup(cpi); |
| } else if (q_cfg->aq_mode == COMPLEXITY_AQ) { |
| av1_setup_in_frame_q_adj(cpi); |
| } |
| |
| if (cm->seg.enabled) { |
| if (!cm->seg.update_data && cm->prev_frame) { |
| segfeatures_copy(&cm->seg, &cm->prev_frame->seg); |
| cm->seg.enabled = cm->prev_frame->seg.enabled; |
| } else { |
| av1_calculate_segdata(&cm->seg); |
| } |
| } else { |
| memset(&cm->seg, 0, sizeof(cm->seg)); |
| } |
| segfeatures_copy(&cm->cur_frame->seg, &cm->seg); |
| cm->cur_frame->seg.enabled = cm->seg.enabled; |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, av1_encode_frame_time); |
| #endif |
| // Set the motion vector precision based on mv stats from the last coded |
| // frame. |
| if (!frame_is_intra_only(cm)) { |
| av1_pick_and_set_high_precision_mv(cpi, q); |
| |
| // If the precision has changed during different iteration of the loop, |
| // then we need to reset the global motion vectors |
| if (loop_count > 0 && cm->features.fr_mv_precision != last_loop_mv_prec) { |
| gm_info->search_done = 0; |
| } |
| last_loop_mv_prec = cm->features.fr_mv_precision; |
| } else { |
| // TODO(chiyotsai@google.com): The frame level mv precision should be set |
| // to MV_SUBPEL_NONE for more accurate intrabc search. But doing this |
| // right now will cause an unwanted STATS_CHANGED. Fix this upstream |
| // instead. |
| // av1_set_high_precision_mv(cpi, MV_PRECISION_ONE_PEL); |
| } |
| |
| // transform / motion compensation build reconstruction frame |
| av1_encode_frame(cpi); |
| |
| // Reset the mv_stats in case we are interrupted by an intraframe or an |
| // overlay frame. |
| if (cpi->mv_stats.valid) { |
| av1_zero(cpi->mv_stats); |
| } |
| |
| // Gather the mv_stats for the next frame |
| if (cpi->sf.hl_sf.high_precision_mv_usage == LAST_MV_DATA && |
| av1_frame_allows_smart_mv(cpi)) { |
| av1_collect_mv_stats(cpi, q); |
| } |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, av1_encode_frame_time); |
| #endif |
| |
| aom_clear_system_state(); |
| |
| // Dummy pack of the bitstream using up to date stats to get an |
| // accurate estimate of output frame size to determine if we need |
| // to recode. |
| const int do_dummy_pack = |
| (cpi->sf.hl_sf.recode_loop >= ALLOW_RECODE_KFARFGF && |
| oxcf->rc_cfg.mode != AOM_Q) || |
| oxcf->rc_cfg.min_cr > 0; |
| if (do_dummy_pack) { |
| av1_finalize_encoded_frame(cpi); |
| int largest_tile_id = 0; // Output from bitstream: unused here |
| if (av1_pack_bitstream(cpi, dest, size, &largest_tile_id) != |
| AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| |
| rc->projected_frame_size = (int)(*size) << 3; |
| } |
| |
| #if CONFIG_TUNE_VMAF |
| if (oxcf->tune_cfg.tuning >= AOM_TUNE_VMAF_WITH_PREPROCESSING && |
| oxcf->tune_cfg.tuning <= AOM_TUNE_VMAF_NEG_MAX_GAIN) { |
| q = cpi->vmaf_info.original_qindex; |
| } |
| #endif |
| if (allow_recode) { |
| // Update q and decide whether to do a recode loop |
| recode_loop_update_q(cpi, &loop, &q, &q_low, &q_high, top_index, |
| bottom_index, &undershoot_seen, &overshoot_seen, |
| &low_cr_seen, loop_count); |
| } |
| |
| // Special case for overlay frame. |
| if (loop && rc->is_src_frame_alt_ref && |
| rc->projected_frame_size < rc->max_frame_bandwidth) { |
| loop = 0; |
| } |
| |
| if (loop) { |
| ++loop_count; |
| |
| #if CONFIG_INTERNAL_STATS |
| ++cpi->tot_recode_hits; |
| #endif |
| } |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| if (loop) printf("\n Recoding:"); |
| #endif |
| } while (loop); |
| |
| return AOM_CODEC_OK; |
| } |
| |
| static INLINE bool allow_tip_direct_output(AV1_COMMON *const cm) { |
| if (!frame_is_intra_only(cm) && !encode_show_existing_frame(cm) && |
| cm->seq_params.enable_tip == 1 && cm->features.tip_frame_mode && |
| !av1_superres_scaled(cm)) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static INLINE int compute_tip_direct_output_mode_RD(AV1_COMP *cpi, |
| uint8_t *dest, size_t *size, |
| int64_t *sse, int64_t *rate, |
| int *largest_tile_id) { |
| AV1_COMMON *const cm = &cpi->common; |
| if (allow_tip_direct_output(cm)) { |
| cm->features.tip_frame_mode = TIP_FRAME_AS_OUTPUT; |
| #if CONFIG_OPTFLOW_ON_TIP || CONFIG_TIP_DIRECT_FRAME_MV |
| ThreadData *const td = &cpi->td; |
| av1_setup_tip_frame(cm, &td->mb.e_mbd, NULL, td->mb.tmp_conv_dst, |
| av1_enc_calc_subpel_params); |
| #endif // CONFIG_OPTFLOW_ON_TIP || CONFIG_TIP_DIRECT_FRAME_MV |
| #if !CONFIG_TIP_DIRECT_FRAME_MV |
| av1_finalize_encoded_frame(cpi); |
| if (av1_pack_bitstream(cpi, dest, size, largest_tile_id) != AOM_CODEC_OK) |
| return AOM_CODEC_ERROR; |
| #endif // !CONFIG_TIP_DIRECT_FRAME_MV |
| |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| const int64_t rdmult = |
| av1_compute_rd_mult(cpi, cm->quant_params.base_qindex); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| |
| #if CONFIG_LF_SUB_PU |
| if (cm->seq_params.enable_lf_sub_pu && cm->features.allow_lf_sub_pu) { |
| #if CONFIG_TIP_IMPLICIT_QUANT |
| const int u_ac_delta_q_backup = cm->quant_params.u_ac_delta_q; |
| const int v_ac_delta_q_backup = cm->quant_params.v_ac_delta_q; |
| const int base_qindex_backup = cm->quant_params.base_qindex; |
| if (cm->seq_params.enable_tip_explicit_qp == 0) { |
| const int avg_u_ac_delta_q = |
| (cm->tip_ref.ref_frame_buffer[0]->u_ac_delta_q + |
| cm->tip_ref.ref_frame_buffer[1]->u_ac_delta_q + 1) >> |
| 1; |
| const int avg_v_ac_delta_q = |
| (cm->tip_ref.ref_frame_buffer[0]->v_ac_delta_q + |
| cm->tip_ref.ref_frame_buffer[1]->v_ac_delta_q + 1) >> |
| 1; |
| const int avg_base_qindex = |
| (cm->tip_ref.ref_frame_buffer[0]->base_qindex + |
| cm->tip_ref.ref_frame_buffer[1]->base_qindex + 1) >> |
| 1; |
| cm->cur_frame->u_ac_delta_q = cm->quant_params.u_ac_delta_q = |
| avg_u_ac_delta_q; |
| cm->cur_frame->v_ac_delta_q = cm->quant_params.v_ac_delta_q = |
| avg_v_ac_delta_q; |
| cm->cur_frame->base_qindex = cm->quant_params.base_qindex = |
| avg_base_qindex; |
| } |
| #endif // CONFIG_TIP_IMPLICIT_QUANT |
| search_tip_filter_level(cpi, cm); |
| init_tip_lf_parameter(cm, 0, av1_num_planes(cm)); |
| loop_filter_tip_frame(cm, 0, av1_num_planes(cm)); |
| #if CONFIG_TIP_IMPLICIT_QUANT |
| if (cm->seq_params.enable_tip_explicit_qp == 0) { |
| cm->cur_frame->u_ac_delta_q = cm->quant_params.u_ac_delta_q = |
| u_ac_delta_q_backup; |
| cm->cur_frame->v_ac_delta_q = cm->quant_params.v_ac_delta_q = |
| v_ac_delta_q_backup; |
| cm->cur_frame->base_qindex = cm->quant_params.base_qindex = |
| base_qindex_backup; |
| } |
| #endif // CONFIG_TIP_IMPLICIT_QUANT |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| aom_extend_frame_borders(&cm->tip_ref.tip_frame->buf, av1_num_planes(cm)); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| } |
| #endif // CONFIG_LF_SUB_PU |
| |
| // Compute sse and rate. |
| YV12_BUFFER_CONFIG *tip_frame_buf = &cm->tip_ref.tip_frame->buf; |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| cm->tip_interp_filter = MULTITAP_SHARP; |
| const int search_dir[8][2] = { |
| { -1, -1 }, { -1, 0 }, { -1, 1 }, { 0, -1 }, |
| { 0, 1 }, { 1, -1 }, { 1, 0 }, { 1, 1 }, |
| }; |
| int64_t best_sse = aom_highbd_get_y_sse(cpi->source, tip_frame_buf); |
| best_sse += |
| aom_highbd_sse(cpi->source->u_buffer, cpi->source->uv_stride, |
| tip_frame_buf->u_buffer, tip_frame_buf->uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| best_sse += |
| aom_highbd_sse(cpi->source->v_buffer, cpi->source->uv_stride, |
| tip_frame_buf->v_buffer, tip_frame_buf->uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| int_mv ref_mv; |
| ref_mv.as_int = 0; |
| |
| int sym_rate_cost = 1; |
| int_mv best_mv = ref_mv; |
| best_sse = (int64_t)RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, (sym_rate_cost << 5), best_sse, cm->seq_params.bit_depth); |
| int best_center[2] = { 0, 0 }; |
| |
| int search_step = 8; |
| while (search_step > 0) { |
| for (int idx = 0; idx < 8; ++idx) { |
| ref_mv.as_mv.row = best_center[0] + search_dir[idx][0] * search_step; |
| ref_mv.as_mv.col = best_center[1] + search_dir[idx][1] * search_step; |
| |
| if (abs(ref_mv.as_mv.row) > 15 || abs(ref_mv.as_mv.col) > 15) continue; |
| |
| cm->tip_global_motion.as_int = ref_mv.as_int; |
| av1_setup_tip_frame(cm, &td->mb.e_mbd, NULL, td->mb.tmp_conv_dst, |
| av1_enc_calc_subpel_params); |
| #if CONFIG_LF_SUB_PU |
| if (cm->seq_params.enable_lf_sub_pu && cm->features.allow_lf_sub_pu) { |
| loop_filter_tip_frame(cm, 0, av1_num_planes(cm)); |
| } |
| #endif // CONFIG_LF_SUB_PU |
| |
| int64_t this_sse = aom_highbd_get_y_sse(cpi->source, tip_frame_buf); |
| this_sse += |
| aom_highbd_sse(cpi->source->u_buffer, cpi->source->uv_stride, |
| tip_frame_buf->u_buffer, tip_frame_buf->uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| this_sse += |
| aom_highbd_sse(cpi->source->v_buffer, cpi->source->uv_stride, |
| tip_frame_buf->v_buffer, tip_frame_buf->uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| |
| sym_rate_cost = 13; |
| this_sse = (int64_t)RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, (sym_rate_cost << 5), this_sse, cm->seq_params.bit_depth); |
| if (this_sse < best_sse) { |
| best_mv = ref_mv; |
| best_sse = this_sse; |
| } |
| } |
| best_center[0] = best_mv.as_mv.row; |
| best_center[1] = best_mv.as_mv.col; |
| search_step >>= 1; |
| } |
| |
| cm->tip_global_motion = best_mv; |
| |
| best_sse = INT64_MAX; |
| InterpFilter best_interp_filter = MULTITAP_SHARP; |
| |
| for (InterpFilter interp_filter = EIGHTTAP_REGULAR; |
| interp_filter <= MULTITAP_SHARP; ++interp_filter) { |
| if (interp_filter == EIGHTTAP_SMOOTH) continue; |
| |
| cm->tip_interp_filter = interp_filter; |
| av1_setup_tip_frame(cm, &td->mb.e_mbd, NULL, td->mb.tmp_conv_dst, |
| av1_enc_calc_subpel_params); |
| #if CONFIG_LF_SUB_PU |
| if (cm->seq_params.enable_lf_sub_pu && cm->features.allow_lf_sub_pu) { |
| loop_filter_tip_frame(cm, 0, av1_num_planes(cm)); |
| } |
| #endif // CONFIG_LF_SUB_PU |
| |
| int64_t this_sse = aom_highbd_get_y_sse(cpi->source, tip_frame_buf); |
| this_sse += |
| aom_highbd_sse(cpi->source->u_buffer, cpi->source->uv_stride, |
| tip_frame_buf->u_buffer, tip_frame_buf->uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| |
| this_sse += |
| aom_highbd_sse(cpi->source->v_buffer, cpi->source->uv_stride, |
| tip_frame_buf->v_buffer, tip_frame_buf->uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| |
| if (this_sse < best_sse) { |
| best_interp_filter = interp_filter; |
| best_sse = this_sse; |
| } |
| } |
| cm->tip_interp_filter = best_interp_filter; |
| |
| av1_finalize_encoded_frame(cpi); |
| if (av1_pack_bitstream(cpi, dest, size, largest_tile_id) != AOM_CODEC_OK) |
| return AOM_CODEC_ERROR; |
| |
| *sse = best_sse; |
| #else |
| *sse = aom_highbd_get_y_sse(cpi->source, tip_frame_buf); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| |
| const int64_t bits = (*size << 3); |
| *rate = (bits << 5); // To match scale. |
| cm->features.tip_frame_mode = TIP_FRAME_AS_REF; |
| } |
| |
| return AOM_CODEC_OK; |
| } |
| |
| static INLINE int finalize_tip_mode(AV1_COMP *cpi, uint8_t *dest, size_t *size, |
| int64_t *sse, int64_t *rate, |
| int64_t tip_as_output_sse, |
| int64_t tip_as_output_rate, |
| int *largest_tile_id) { |
| AV1_COMMON *const cm = &cpi->common; |
| |
| int64_t tip_as_ref_sse = INT64_MAX; |
| int64_t tip_as_ref_rate = INT64_MAX; |
| if (sse != NULL && rate != NULL) { |
| tip_as_ref_sse = *sse; |
| tip_as_ref_rate = *rate; |
| } else { |
| tip_as_ref_sse = aom_highbd_get_y_sse(cpi->source, &cm->cur_frame->buf); |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| tip_as_ref_sse += aom_highbd_sse( |
| cpi->source->u_buffer, cpi->source->uv_stride, |
| cm->cur_frame->buf.u_buffer, cm->cur_frame->buf.uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| tip_as_ref_sse += aom_highbd_sse( |
| cpi->source->v_buffer, cpi->source->uv_stride, |
| cm->cur_frame->buf.v_buffer, cm->cur_frame->buf.uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| const int64_t bits = (*size << 3); |
| tip_as_ref_rate = (bits << 5); // To match scale. |
| } |
| |
| const int64_t rdmult = av1_compute_rd_mult(cpi, cm->quant_params.base_qindex); |
| |
| const double normal_coding_rdcost = RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, tip_as_ref_rate, tip_as_ref_sse, cm->seq_params.bit_depth); |
| const double tip_direct_output_rdcost = RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, tip_as_output_rate, tip_as_output_sse, cm->seq_params.bit_depth); |
| if (tip_direct_output_rdcost < normal_coding_rdcost) { |
| cm->features.tip_frame_mode = TIP_FRAME_AS_OUTPUT; |
| #if CONFIG_TIP_IMPLICIT_QUANT |
| if (cm->seq_params.enable_tip_explicit_qp == 0) { |
| const int avg_u_ac_delta_q = |
| (cm->tip_ref.ref_frame_buffer[0]->u_ac_delta_q + |
| cm->tip_ref.ref_frame_buffer[1]->u_ac_delta_q + 1) >> |
| 1; |
| const int avg_v_ac_delta_q = |
| (cm->tip_ref.ref_frame_buffer[0]->v_ac_delta_q + |
| cm->tip_ref.ref_frame_buffer[1]->v_ac_delta_q + 1) >> |
| 1; |
| const int avg_base_qindex = |
| (cm->tip_ref.ref_frame_buffer[0]->base_qindex + |
| cm->tip_ref.ref_frame_buffer[1]->base_qindex + 1) >> |
| 1; |
| cm->cur_frame->u_ac_delta_q = cm->quant_params.u_ac_delta_q = |
| avg_u_ac_delta_q; |
| cm->cur_frame->v_ac_delta_q = cm->quant_params.v_ac_delta_q = |
| avg_v_ac_delta_q; |
| cm->cur_frame->base_qindex = cm->quant_params.base_qindex = |
| avg_base_qindex; |
| } |
| #endif // CONFIG_TIP_IMPLICIT_QUANT |
| const int num_planes = av1_num_planes(cm); |
| av1_copy_tip_frame_tmvp_mvs(cm); |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| ThreadData *const td = &cpi->td; |
| av1_setup_tip_frame(cm, &td->mb.e_mbd, NULL, td->mb.tmp_conv_dst, |
| av1_enc_calc_subpel_params); |
| #if CONFIG_LF_SUB_PU |
| if (cm->seq_params.enable_lf_sub_pu && cm->features.allow_lf_sub_pu) { |
| init_tip_lf_parameter(cm, 0, av1_num_planes(cm)); |
| loop_filter_tip_frame(cm, 0, av1_num_planes(cm)); |
| aom_extend_frame_borders(&cm->tip_ref.tip_frame->buf, av1_num_planes(cm)); |
| } |
| #endif // CONFIG_LF_SUB_PU |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| aom_yv12_copy_frame(&cm->tip_ref.tip_frame->buf, &cm->cur_frame->buf, |
| num_planes); |
| |
| cm->lf.filter_level[0] = 0; |
| cm->lf.filter_level[1] = 0; |
| #if CONFIG_FIX_CDEF_SYNTAX |
| cm->cdef_info.cdef_frame_enable = 0; |
| #else |
| cm->cdef_info.cdef_bits = 0; |
| cm->cdef_info.cdef_strengths[0] = 0; |
| cm->cdef_info.nb_cdef_strengths = 1; |
| cm->cdef_info.cdef_uv_strengths[0] = 0; |
| #endif // CONFIG_FIX_CDEF_SYNTAX |
| cm->rst_info[0].frame_restoration_type = RESTORE_NONE; |
| cm->rst_info[1].frame_restoration_type = RESTORE_NONE; |
| cm->rst_info[2].frame_restoration_type = RESTORE_NONE; |
| |
| #if CONFIG_TEMP_LR |
| cm->rst_info[0].frame_filters_on = 0; |
| cm->rst_info[0].temporal_pred_flag = 0; |
| cm->cur_frame->rst_info[0].frame_filters_on = 0; |
| cm->cur_frame->rst_info[0].temporal_pred_flag = 0; |
| #endif // CONFIG_TEMP_LR |
| |
| for (int i = 0; i < INTER_REFS_PER_FRAME; ++i) { |
| cm->global_motion[i] = default_warp_params; |
| cm->cur_frame->global_motion[i] = default_warp_params; |
| } |
| cpi->gm_info.search_done = 0; |
| av1_setup_past_independence(cm); |
| if (!cm->tiles.large_scale) { |
| cm->cur_frame->frame_context = *cm->fc; |
| } |
| |
| av1_finalize_encoded_frame(cpi); |
| if (av1_pack_bitstream(cpi, dest, size, largest_tile_id) != AOM_CODEC_OK) |
| return AOM_CODEC_ERROR; |
| |
| if (sse != NULL) { |
| *sse = tip_as_output_sse; |
| } |
| if (rate != NULL) { |
| *rate = tip_as_output_rate; |
| } |
| cm->features.tip_frame_mode = TIP_FRAME_AS_REF; |
| } |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| else { |
| cm->tip_global_motion.as_int = 0; |
| cm->tip_interp_filter = MULTITAP_SHARP; |
| } |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| |
| return AOM_CODEC_OK; |
| } |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| /*!\brief Parameters for representing LR flexible syntax. |
| */ |
| typedef struct { |
| /*!\brief Mask of lr tool(s) to disable */ |
| uint8_t lr_tools_disable_mask[MAX_MB_PLANE]; |
| /*!\brief Number of lr tools enabled */ |
| int lr_tools_count[MAX_MB_PLANE]; |
| /*!\brief Number of lr options in switchable mode */ |
| int lr_switchable_tools_count[MAX_MB_PLANE]; |
| /*!\brief Number of lr modes available at frame level */ |
| int lr_frame_tools_count[MAX_MB_PLANE]; |
| /*!\brief Index of last bit transmitted */ |
| int lr_last_switchable_ndx[MAX_MB_PLANE]; |
| /*!\brief Restoration Type if last bit transmitted is 0 */ |
| int lr_last_switchable_ndx_0_type[MAX_MB_PLANE]; |
| } LrParams; |
| |
| static void store_lr_parameters(AV1_COMMON *const cm, LrParams *lr_params) { |
| const int num_planes = av1_num_planes(cm); |
| FeatureFlags *const fea_params = &cm->features; |
| |
| for (int i = 0; i < num_planes; ++i) { |
| lr_params->lr_tools_disable_mask[i] = fea_params->lr_tools_disable_mask[i]; |
| lr_params->lr_tools_count[i] = fea_params->lr_tools_count[i]; |
| lr_params->lr_switchable_tools_count[i] = |
| fea_params->lr_switchable_tools_count[i]; |
| lr_params->lr_frame_tools_count[i] = fea_params->lr_frame_tools_count[i]; |
| lr_params->lr_last_switchable_ndx[i] = |
| fea_params->lr_last_switchable_ndx[i]; |
| lr_params->lr_last_switchable_ndx_0_type[i] = |
| fea_params->lr_last_switchable_ndx_0_type[i]; |
| } |
| } |
| |
| static void restore_lr_parameters(AV1_COMMON *const cm, |
| const LrParams *lr_params) { |
| const int num_planes = av1_num_planes(cm); |
| FeatureFlags *const fea_params = &cm->features; |
| |
| for (int i = 0; i < num_planes; ++i) { |
| fea_params->lr_tools_disable_mask[i] = lr_params->lr_tools_disable_mask[i]; |
| fea_params->lr_tools_count[i] = lr_params->lr_tools_count[i]; |
| fea_params->lr_switchable_tools_count[i] = |
| lr_params->lr_switchable_tools_count[i]; |
| fea_params->lr_frame_tools_count[i] = lr_params->lr_frame_tools_count[i]; |
| fea_params->lr_last_switchable_ndx[i] = |
| lr_params->lr_last_switchable_ndx[i]; |
| fea_params->lr_last_switchable_ndx_0_type[i] = |
| lr_params->lr_last_switchable_ndx_0_type[i]; |
| } |
| } |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| /*!\brief Recode loop or a single loop for encoding one frame, followed by |
| * in-loop deblocking filters, CDEF filters, and restoration filters. |
| * |
| * \ingroup high_level_algo |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top-level encoder structure |
| * \param[in] size Bitstream size |
| * \param[in] dest Bitstream output |
| * \param[in] sse Total distortion of the frame |
| * \param[in] rate Total rate of the frame |
| * \param[in] largest_tile_id Tile id of the last tile |
| * |
| * \return Returns a value to indicate if the encoding is done successfully. |
| * \retval #AOM_CODEC_OK |
| * \retval #AOM_CODEC_ERROR |
| */ |
| static int encode_with_recode_loop_and_filter(AV1_COMP *cpi, size_t *size, |
| uint8_t *dest, int64_t *sse, |
| int64_t *rate, |
| int *largest_tile_id) { |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, encode_with_recode_loop_time); |
| #endif |
| int err; |
| if (cpi->sf.hl_sf.recode_loop == DISALLOW_RECODE) |
| err = encode_without_recode(cpi); |
| else |
| err = encode_with_recode_loop(cpi, size, dest); |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, encode_with_recode_loop_time); |
| #endif |
| if (err != AOM_CODEC_OK) { |
| if (err == -1) { |
| // special case as described in encode_with_recode_loop(). |
| // Encoding was skipped. |
| err = AOM_CODEC_OK; |
| if (sse != NULL) *sse = INT64_MAX; |
| if (rate != NULL) *rate = INT64_MAX; |
| *largest_tile_id = 0; |
| } |
| return err; |
| } |
| |
| AV1_COMMON *const cm = &cpi->common; |
| SequenceHeader *const seq_params = &cm->seq_params; |
| |
| #if CONFIG_TEMP_LR |
| cm->cur_frame->rst_info[AOM_PLANE_Y].frame_filters_on = 0; |
| #endif // CONFIG_TEMP_LR |
| |
| // Special case code to reduce pulsing when key frames are forced at a |
| // fixed interval. Note the reconstruction error if it is the frame before |
| // the force key frame |
| if (cpi->rc.next_key_frame_forced && cpi->rc.frames_to_key == 1) { |
| cpi->ambient_err = aom_highbd_get_y_sse(cpi->source, &cm->cur_frame->buf); |
| } |
| |
| cm->cur_frame->buf.color_primaries = seq_params->color_primaries; |
| cm->cur_frame->buf.transfer_characteristics = |
| seq_params->transfer_characteristics; |
| cm->cur_frame->buf.matrix_coefficients = seq_params->matrix_coefficients; |
| cm->cur_frame->buf.monochrome = seq_params->monochrome; |
| cm->cur_frame->buf.chroma_sample_position = |
| seq_params->chroma_sample_position; |
| cm->cur_frame->buf.color_range = seq_params->color_range; |
| cm->cur_frame->buf.render_width = cm->render_width; |
| cm->cur_frame->buf.render_height = cm->render_height; |
| cm->cur_frame->buf.bit_depth = (unsigned int)seq_params->bit_depth; |
| |
| // If superres is used turn off PC_WIENER since tx_skip values will |
| // not be aligned. |
| uint8_t master_lr_tools_disable_mask[2] = { |
| cm->seq_params.lr_tools_disable_mask[0], |
| cm->seq_params.lr_tools_disable_mask[1] |
| }; |
| av1_set_lr_tools(master_lr_tools_disable_mask[0], 0, &cm->features); |
| av1_set_lr_tools(master_lr_tools_disable_mask[1], 1, &cm->features); |
| av1_set_lr_tools(master_lr_tools_disable_mask[1], 2, &cm->features); |
| |
| // Pick the loop filter level for the frame. |
| if (!is_global_intrabc_allowed(cm)) { |
| loopfilter_frame(cpi, cm); |
| } else { |
| cm->lf.filter_level[0] = 0; |
| cm->lf.filter_level[1] = 0; |
| #if CONFIG_FIX_CDEF_SYNTAX |
| cm->cdef_info.cdef_frame_enable = 0; |
| #else |
| cm->cdef_info.cdef_bits = 0; |
| cm->cdef_info.cdef_strengths[0] = 0; |
| cm->cdef_info.nb_cdef_strengths = 1; |
| cm->cdef_info.cdef_uv_strengths[0] = 0; |
| #endif // CONFIG_FIX_CDEF_SYNTAX |
| cm->rst_info[0].frame_restoration_type = RESTORE_NONE; |
| cm->rst_info[1].frame_restoration_type = RESTORE_NONE; |
| cm->rst_info[2].frame_restoration_type = RESTORE_NONE; |
| } |
| |
| int64_t tip_as_output_sse = INT64_MAX; |
| int64_t tip_as_output_rate = INT64_MAX; |
| compute_tip_direct_output_mode_RD(cpi, dest, size, &tip_as_output_sse, |
| &tip_as_output_rate, largest_tile_id); |
| |
| // TODO(debargha): Fix mv search range on encoder side |
| // aom_extend_frame_inner_borders(&cm->cur_frame->buf, av1_num_planes(cm)); |
| aom_extend_frame_borders(&cm->cur_frame->buf, av1_num_planes(cm)); |
| |
| #ifdef OUTPUT_YUV_REC |
| aom_write_one_yuv_frame(cm, &cm->cur_frame->buf); |
| #endif |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| // For primary_ref_frame and derived_primary_ref_frame, if one of them is |
| // PRIMARY_REF_NONE, the other one is also PRIMARY_REF_NONE. |
| assert(IMPLIES(cm->features.derived_primary_ref_frame == PRIMARY_REF_NONE, |
| cm->features.primary_ref_frame == PRIMARY_REF_NONE)); |
| assert(IMPLIES(cm->features.primary_ref_frame == PRIMARY_REF_NONE, |
| cm->features.derived_primary_ref_frame == PRIMARY_REF_NONE)); |
| |
| if (cm->features.primary_ref_frame != PRIMARY_REF_NONE && |
| !cm->tiles.large_scale && !cpi->error_resilient_frame_seen) { |
| const int n_refs = cm->ref_frames_info.num_total_refs; |
| // int frame_size[REF_FRAMES]; |
| int best_ref_idx = -1; |
| int best_frame_size = INT32_MAX; |
| int cur_frame_size = INT32_MAX; |
| |
| // Save LR parameters |
| LrParams lr_params = { { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 } }; |
| store_lr_parameters(cm, &lr_params); |
| |
| for (int i = 0; i < n_refs; ++i) { |
| const int temp_map_idx = get_ref_frame_map_idx(cm, i); |
| const RefCntBuffer *const temp_ref_buf = cm->ref_frame_map[temp_map_idx]; |
| if (temp_ref_buf->frame_type != INTER_FRAME) continue; |
| |
| *cm->fc = temp_ref_buf->frame_context; |
| if (!cm->fc->initialized) |
| aom_internal_error(&cm->error, AOM_CODEC_CORRUPT_FRAME, |
| "Uninitialized entropy context."); |
| |
| av1_finalize_encoded_frame(cpi); |
| // Storing/restoring cm->features.primary_ref_frame isn't needed here |
| // since it always takes 3 bits for primary_ref_frame signaling. |
| // For cases allowing primary_ref_frame search, cpi->signal_primary_ref_ |
| // frame should be 0 before primary_ref_frame search. Here no need to |
| // store previous cpi->signal_primary_ref_frame value. |
| // cpi->signal_primary_ref_frame = |
| // cm->features.derived_primary_ref_frame != i; |
| size_t temp_size; |
| int temp_largest_tile_id = 0; // Output from bitstream: unused here |
| if (av1_pack_bitstream(cpi, dest, &temp_size, &temp_largest_tile_id) != |
| AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| restore_lr_parameters(cm, &lr_params); |
| |
| const int frame_size = (int)(temp_size); |
| if (cm->features.primary_ref_frame == i) cur_frame_size = frame_size; |
| if (frame_size < best_frame_size) { |
| best_frame_size = frame_size; |
| best_ref_idx = i; |
| } |
| } |
| |
| if (cm->features.primary_ref_frame != best_ref_idx && |
| best_frame_size < cur_frame_size) { |
| cm->features.primary_ref_frame = best_ref_idx; |
| } |
| cpi->signal_primary_ref_frame = cm->features.derived_primary_ref_frame != |
| cm->features.primary_ref_frame; |
| |
| const int map_idx = |
| get_ref_frame_map_idx(cm, cm->features.primary_ref_frame); |
| const RefCntBuffer *const ref_buf = cm->ref_frame_map[map_idx]; |
| |
| *cm->fc = ref_buf->frame_context; |
| if (!cm->fc->initialized) |
| aom_internal_error(&cm->error, AOM_CODEC_CORRUPT_FRAME, |
| "Uninitialized entropy context."); |
| } |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| av1_finalize_encoded_frame(cpi); |
| // Build the bitstream |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, av1_pack_bitstream_final_time); |
| #endif |
| if (av1_pack_bitstream(cpi, dest, size, largest_tile_id) != AOM_CODEC_OK) |
| return AOM_CODEC_ERROR; |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, av1_pack_bitstream_final_time); |
| #endif |
| |
| // Compute sse and rate. |
| if (sse != NULL) { |
| int64_t tip_as_ref_sse = |
| aom_highbd_get_y_sse(cpi->source, &cm->cur_frame->buf); |
| #if CONFIG_TIP_DIRECT_FRAME_MV |
| tip_as_ref_sse += aom_highbd_sse( |
| cpi->source->u_buffer, cpi->source->uv_stride, |
| cm->cur_frame->buf.u_buffer, cm->cur_frame->buf.uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| tip_as_ref_sse += aom_highbd_sse( |
| cpi->source->v_buffer, cpi->source->uv_stride, |
| cm->cur_frame->buf.v_buffer, cm->cur_frame->buf.uv_stride, |
| cpi->source->uv_width, cpi->source->uv_height); |
| #endif // CONFIG_TIP_DIRECT_FRAME_MV |
| *sse = tip_as_ref_sse; |
| } |
| if (rate != NULL) { |
| const int64_t bits = (*size << 3); |
| *rate = (bits << 5); // To match scale. |
| } |
| |
| if (allow_tip_direct_output(cm)) { |
| finalize_tip_mode(cpi, dest, size, sse, rate, tip_as_output_sse, |
| tip_as_output_rate, largest_tile_id); |
| } |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| cpi->last_encoded_frame_order_hint = cm->current_frame.display_order_hint; |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| return AOM_CODEC_OK; |
| } |
| |
| static int encode_with_and_without_superres(AV1_COMP *cpi, size_t *size, |
| uint8_t *dest, |
| int *largest_tile_id) { |
| AV1_COMMON *const cm = &cpi->common; |
| assert(cm->seq_params.enable_superres); |
| assert(av1_superres_in_recode_allowed(cpi)); |
| aom_codec_err_t err = AOM_CODEC_OK; |
| av1_save_all_coding_context(cpi); |
| FrameProbInfo *const frame_probs = &cpi->frame_probs; |
| const FRAME_UPDATE_TYPE update_type = get_frame_update_type(&cpi->gf_group); |
| int warped_probs_tmp = frame_probs->warped_probs[update_type]; |
| |
| aom_superres_mode orig_superres_mode = cpi->superres_mode; |
| cpi->superres_mode = AOM_SUPERRES_NONE; |
| int top_index = 0, bottom_index = 0, full_res_q = 0; |
| full_res_q = |
| av1_rc_pick_q_and_bounds(cpi, &cpi->rc, cm->width, cm->height, |
| cpi->gf_group.index, &bottom_index, &top_index); |
| const int64_t rdmult = av1_compute_rd_mult_based_on_qindex(cpi, full_res_q); |
| |
| cpi->superres_mode = orig_superres_mode; |
| int q_th = 160 + (MAXQ_OFFSET * (cm->seq_params.bit_depth - 8)); |
| |
| int do_not_search_superres = full_res_q <= q_th; |
| if (do_not_search_superres) { |
| restore_all_coding_context(cpi); |
| cpi->superres_mode = AOM_SUPERRES_NONE; |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| err = encode_with_recode_loop_and_filter(cpi, size, dest, NULL, NULL, |
| largest_tile_id); |
| return err; |
| } |
| |
| int64_t sse1 = INT64_MAX; |
| int64_t rate1 = INT64_MAX; |
| int largest_tile_id1 = 0; |
| int64_t sse2 = INT64_MAX; |
| int64_t rate2 = INT64_MAX; |
| int largest_tile_id2; |
| double proj_rdcost1 = DBL_MAX; |
| const int search_step = 2; |
| |
| // Encode with superres. |
| if (cpi->sf.hl_sf.superres_auto_search_type == SUPERRES_AUTO_ALL) { |
| SuperResCfg *const superres_cfg = &cpi->oxcf.superres_cfg; |
| int64_t superres_sses[SCALE_NUMERATOR]; |
| int64_t superres_rates[SCALE_NUMERATOR]; |
| int superres_largest_tile_ids[SCALE_NUMERATOR]; |
| // Use superres for Key-frames and Alt-ref frames only. |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| if (gf_group->update_type[gf_group->index] != OVERLAY_UPDATE && |
| gf_group->update_type[gf_group->index] != INTNL_OVERLAY_UPDATE) { |
| for (int denom = SCALE_NUMERATOR + 2; denom <= 2 * SCALE_NUMERATOR; |
| denom += search_step) { |
| superres_cfg->superres_scale_denominator = denom; |
| superres_cfg->superres_kf_scale_denominator = denom; |
| const int this_index = denom - (SCALE_NUMERATOR + 1); |
| |
| cpi->superres_mode = AOM_SUPERRES_AUTO; // Super-res on for this loop. |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| if (cpi->superres_mode == AOM_SUPERRES_AUTO && |
| superres_cfg->superres_scale_denominator != SCALE_NUMERATOR) { |
| cpi->common.features.allow_screen_content_tools = 0; |
| } |
| err = encode_with_recode_loop_and_filter( |
| cpi, size, dest, &superres_sses[this_index], |
| &superres_rates[this_index], |
| &superres_largest_tile_ids[this_index]); |
| cpi->superres_mode = AOM_SUPERRES_NONE; // Reset to default (full-res). |
| if (err != AOM_CODEC_OK) return err; |
| restore_all_coding_context(cpi); |
| } |
| // Reset. |
| superres_cfg->superres_scale_denominator = SCALE_NUMERATOR; |
| superres_cfg->superres_kf_scale_denominator = SCALE_NUMERATOR; |
| } else { |
| for (int denom = SCALE_NUMERATOR + 1; denom <= 2 * SCALE_NUMERATOR; |
| ++denom) { |
| const int this_index = denom - (SCALE_NUMERATOR + 1); |
| superres_sses[this_index] = INT64_MAX; |
| superres_rates[this_index] = INT64_MAX; |
| } |
| } |
| // Encode without superres. |
| assert(cpi->superres_mode == AOM_SUPERRES_NONE); |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| err = encode_with_recode_loop_and_filter(cpi, size, dest, &sse2, &rate2, |
| &largest_tile_id2); |
| if (err != AOM_CODEC_OK) return err; |
| |
| // Find the best rdcost among all superres denoms. |
| int best_denom = -1; |
| for (int denom = SCALE_NUMERATOR + 2; denom <= 2 * SCALE_NUMERATOR; |
| denom += search_step) { |
| const int this_index = denom - (SCALE_NUMERATOR + 1); |
| const int64_t this_sse = superres_sses[this_index]; |
| const int64_t this_rate = superres_rates[this_index]; |
| const int this_largest_tile_id = superres_largest_tile_ids[this_index]; |
| const double this_rdcost = RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, this_rate, this_sse, cm->seq_params.bit_depth); |
| if (this_rdcost < proj_rdcost1) { |
| sse1 = this_sse; |
| rate1 = this_rate; |
| largest_tile_id1 = this_largest_tile_id; |
| proj_rdcost1 = this_rdcost; |
| best_denom = denom; |
| } |
| } |
| const double proj_rdcost2 = RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, rate2, sse2, cm->seq_params.bit_depth); |
| // Re-encode with superres if it's better. |
| if (proj_rdcost1 < proj_rdcost2) { |
| restore_all_coding_context(cpi); |
| // TODO(urvang): We should avoid rerunning the recode loop by saving |
| // previous output+state, or running encode only for the selected 'q' in |
| // previous step. |
| // Again, temporarily force the best denom. |
| superres_cfg->superres_scale_denominator = best_denom; |
| superres_cfg->superres_kf_scale_denominator = best_denom; |
| int64_t sse3 = INT64_MAX; |
| int64_t rate3 = INT64_MAX; |
| cpi->superres_mode = |
| AOM_SUPERRES_AUTO; // Super-res on for this recode loop. |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| if (cpi->superres_mode == AOM_SUPERRES_AUTO && |
| superres_cfg->superres_scale_denominator != SCALE_NUMERATOR) { |
| cpi->common.features.allow_screen_content_tools = 0; |
| } |
| err = encode_with_recode_loop_and_filter(cpi, size, dest, &sse3, &rate3, |
| largest_tile_id); |
| cpi->superres_mode = AOM_SUPERRES_NONE; // Reset to default (full-res). |
| assert(sse1 == sse3); |
| assert(rate1 == rate3); |
| assert(largest_tile_id1 == *largest_tile_id); |
| // Reset. |
| superres_cfg->superres_scale_denominator = SCALE_NUMERATOR; |
| superres_cfg->superres_kf_scale_denominator = SCALE_NUMERATOR; |
| } else { |
| *largest_tile_id = largest_tile_id2; |
| } |
| } else { |
| assert(cpi->sf.hl_sf.superres_auto_search_type == SUPERRES_AUTO_DUAL); |
| cpi->superres_mode = |
| AOM_SUPERRES_AUTO; // Super-res on for this recode loop. |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| if (cpi->superres_mode == AOM_SUPERRES_AUTO) { |
| cpi->common.features.allow_screen_content_tools = 0; |
| } |
| err = encode_with_recode_loop_and_filter(cpi, size, dest, &sse1, &rate1, |
| &largest_tile_id1); |
| cpi->superres_mode = AOM_SUPERRES_NONE; // Reset to default (full-res). |
| if (err != AOM_CODEC_OK) return err; |
| restore_all_coding_context(cpi); |
| // Encode without superres. |
| assert(cpi->superres_mode == AOM_SUPERRES_NONE); |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| err = encode_with_recode_loop_and_filter(cpi, size, dest, &sse2, &rate2, |
| &largest_tile_id2); |
| |
| if (err != AOM_CODEC_OK) return err; |
| |
| proj_rdcost1 = RDCOST_DBL_WITH_NATIVE_BD_DIST(rdmult, rate1, sse1, |
| cm->seq_params.bit_depth); |
| const double proj_rdcost2 = RDCOST_DBL_WITH_NATIVE_BD_DIST( |
| rdmult, rate2, sse2, cm->seq_params.bit_depth); |
| // Re-encode with superres if it's better. |
| if (proj_rdcost1 < proj_rdcost2) { |
| restore_all_coding_context(cpi); |
| // TODO(urvang): We should avoid rerunning the recode loop by saving |
| // previous output+state, or running encode only for the selected 'q' in |
| // previous step. |
| int64_t sse3 = INT64_MAX; |
| int64_t rate3 = INT64_MAX; |
| cpi->superres_mode = |
| AOM_SUPERRES_AUTO; // Super-res on for this recode loop. |
| frame_probs->warped_probs[update_type] = warped_probs_tmp; |
| if (cpi->superres_mode == AOM_SUPERRES_AUTO) { |
| cpi->common.features.allow_screen_content_tools = 0; |
| } |
| err = encode_with_recode_loop_and_filter(cpi, size, dest, &sse3, &rate3, |
| largest_tile_id); |
| cpi->superres_mode = AOM_SUPERRES_NONE; // Reset to default (full-res). |
| assert(sse1 == sse3); |
| assert(rate1 == rate3); |
| assert(largest_tile_id1 == *largest_tile_id); |
| } else { |
| *largest_tile_id = largest_tile_id2; |
| } |
| } |
| |
| return err; |
| } |
| |
| extern void av1_print_frame_contexts(const FRAME_CONTEXT *fc, |
| const char *filename); |
| |
| /*!\brief Run the final pass encoding for 1-pass/2-pass encoding mode, and pack |
| * the bitstream |
| * |
| * \ingroup high_level_algo |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top-level encoder structure |
| * \param[in] size Bitstream size |
| * \param[in] dest Bitstream output |
| * |
| * \return Returns a value to indicate if the encoding is done successfully. |
| * \retval #AOM_CODEC_OK |
| * \retval #AOM_CODEC_ERROR |
| */ |
| static int encode_frame_to_data_rate(AV1_COMP *cpi, size_t *size, |
| uint8_t *dest) { |
| AV1_COMMON *const cm = &cpi->common; |
| SequenceHeader *const seq_params = &cm->seq_params; |
| CurrentFrame *const current_frame = &cm->current_frame; |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| struct segmentation *const seg = &cm->seg; |
| FeatureFlags *const features = &cm->features; |
| const TileConfig *const tile_cfg = &oxcf->tile_cfg; |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, encode_frame_to_data_rate_time); |
| #endif |
| |
| #if CONFIG_IBC_SR_EXT |
| av1_set_screen_content_options(cpi, features); |
| #if CONFIG_SCC_DETERMINATION |
| if (cm->current_frame.frame_type != KEY_FRAME) { |
| // the current kf_allow_sc_tools will be considered when we set |
| // allow_screen_content_tools flag for arf frames, in order to reduce |
| // the chances that could be missed detection as screen content. |
| if (frame_is_kf_gf_arf(cpi)) { |
| features->allow_screen_content_tools |= features->kf_allow_sc_tools; |
| } |
| } else { |
| features->kf_allow_sc_tools = features->allow_screen_content_tools; |
| } |
| #endif // CONFIG_SCC_DETERMINATION |
| cpi->is_screen_content_type = features->allow_screen_content_tools; |
| if (cm->features.allow_intrabc) { |
| cm->features.allow_global_intrabc = |
| #if CONFIG_ENABLE_IBC_NAT |
| cm->features.is_scc_content_by_detector && |
| #endif // CONFIG_ENABLE_IBC_NAT |
| (oxcf->kf_cfg.enable_intrabc_ext != 2) && frame_is_intra_only(cm); |
| |
| cm->features.allow_local_intrabc = !!oxcf->kf_cfg.enable_intrabc_ext; |
| #if CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| set_max_bvp_drl_bits(cpi); |
| #endif // CONFIG_IBC_BV_IMPROVEMENT && CONFIG_IBC_MAX_DRL |
| } else { |
| cm->features.allow_global_intrabc = 0; |
| cm->features.allow_local_intrabc = 0; |
| } |
| #else |
| if (frame_is_intra_only(cm)) { |
| av1_set_screen_content_options(cpi, features); |
| cpi->is_screen_content_type = features->allow_screen_content_tools; |
| } |
| #endif // CONFIG_IBC_SR_EXT |
| const bool compute_ds_filter = |
| ((cpi->common.current_frame.frame_type == KEY_FRAME && |
| cpi->common.show_frame) || |
| cpi->common.current_frame.frame_type == S_FRAME) && |
| !cpi->common.show_existing_frame; |
| if (compute_ds_filter) { |
| av1_set_downsample_filter_options(cpi); |
| } |
| |
| // frame type has been decided outside of this function call |
| cm->cur_frame->frame_type = current_frame->frame_type; |
| |
| cm->tiles.large_scale = tile_cfg->enable_large_scale_tile; |
| cm->tiles.single_tile_decoding = tile_cfg->enable_single_tile_decoding; |
| |
| features->allow_ref_frame_mvs &= frame_might_allow_ref_frame_mvs(cm); |
| // features->allow_ref_frame_mvs needs to be written into the frame header |
| // while cm->tiles.large_scale is 1, therefore, "cm->tiles.large_scale=1" case |
| // is separated from frame_might_allow_ref_frame_mvs(). |
| features->allow_ref_frame_mvs &= !cm->tiles.large_scale; |
| features->allow_warpmv_mode = features->enabled_motion_modes; |
| // temporal set of frame level enable_bawp flag. |
| #if CONFIG_BAWP |
| features->enable_bawp = seq_params->enable_bawp; |
| #endif |
| features->enable_cwp = seq_params->enable_cwp; |
| |
| #if CONFIG_D071_IMP_MSK_BLD |
| features->enable_imp_msk_bld = seq_params->enable_imp_msk_bld; |
| #endif // CONFIG_D071_IMP_MSK_BLD |
| |
| cpi->last_frame_type = current_frame->frame_type; |
| |
| if (frame_is_sframe(cm)) { |
| GF_GROUP *gf_group = &cpi->gf_group; |
| // S frame will wipe out any previously encoded altref so we cannot place |
| // an overlay frame |
| gf_group->update_type[gf_group->size] = GF_UPDATE; |
| } |
| |
| const int encode_show_existing = encode_show_existing_frame(cm); |
| if (encode_show_existing || cm->show_existing_frame) { |
| av1_finalize_encoded_frame(cpi); |
| if (encode_show_existing) { |
| // Build the bitstream |
| int largest_tile_id = 0; // Output from bitstream: unused here |
| if (av1_pack_bitstream(cpi, dest, size, &largest_tile_id) != AOM_CODEC_OK) |
| return AOM_CODEC_ERROR; |
| } |
| |
| if (seq_params->frame_id_numbers_present_flag && |
| current_frame->frame_type == KEY_FRAME) { |
| // Displaying a forward key-frame, so reset the ref buffer IDs |
| int display_frame_id = cm->ref_frame_id[cpi->existing_fb_idx_to_show]; |
| for (int i = 0; i < REF_FRAMES; i++) |
| cm->ref_frame_id[i] = display_frame_id; |
| } |
| |
| cpi->seq_params_locked = 1; |
| |
| // NOTE: Save the new show frame buffer index for --test-code=warn, i.e., |
| // for the purpose to verify no mismatch between encoder and decoder. |
| if (cm->show_frame) cpi->last_show_frame_buf = cm->cur_frame; |
| |
| refresh_reference_frames(cpi); |
| |
| // Since we allocate a spot for the OVERLAY frame in the gf group, we need |
| // to do post-encoding update accordingly. |
| if (cpi->rc.is_src_frame_alt_ref) { |
| av1_set_target_rate(cpi, cm->width, cm->height); |
| av1_rc_postencode_update(cpi, *size); |
| } |
| |
| if (is_psnr_calc_enabled(cpi)) { |
| cpi->source = |
| realloc_and_scale_source(cpi, cm->cur_frame->buf.y_crop_width, |
| cm->cur_frame->buf.y_crop_height); |
| } |
| |
| // current_frame->frame_number is incremented already for |
| // keyframe overlays. |
| if (!av1_check_keyframe_overlay(cpi->gf_group.index, &cpi->gf_group, |
| cpi->rc.frames_since_key)) |
| ++current_frame->frame_number; |
| |
| return AOM_CODEC_OK; |
| } |
| |
| // Work out whether to force_integer_mv this frame |
| if (!is_stat_generation_stage(cpi) && |
| cpi->common.features.allow_screen_content_tools && |
| !frame_is_intra_only(cm)) { |
| if (cpi->common.seq_params.force_integer_mv == 2) { |
| // Adaptive mode: see what previous frame encoded did |
| if (cpi->unscaled_last_source != NULL) { |
| features->cur_frame_force_integer_mv = av1_is_integer_mv( |
| cpi->source, cpi->unscaled_last_source, &cpi->force_intpel_info); |
| } else { |
| cpi->common.features.cur_frame_force_integer_mv = 0; |
| } |
| } else { |
| cpi->common.features.cur_frame_force_integer_mv = |
| cpi->common.seq_params.force_integer_mv; |
| } |
| } else { |
| cpi->common.features.cur_frame_force_integer_mv = 0; |
| } |
| set_max_drl_bits(cpi); |
| |
| // Set default state for segment based loop filter update flags. |
| cm->lf.mode_ref_delta_update = 0; |
| |
| // Set various flags etc to special state if it is a key frame. |
| if (frame_is_intra_only(cm) || frame_is_sframe(cm)) { |
| // Reset the loop filter deltas and segmentation map. |
| av1_reset_segment_features(cm); |
| |
| // If segmentation is enabled force a map update for key frames. |
| if (seg->enabled) { |
| seg->update_map = 1; |
| seg->update_data = 1; |
| } |
| } |
| if (tile_cfg->mtu == 0) { |
| cpi->num_tg = tile_cfg->num_tile_groups; |
| } else { |
| // Use a default value for the purposes of weighting costs in probability |
| // updates |
| cpi->num_tg = DEFAULT_MAX_NUM_TG; |
| } |
| |
| // For 1 pass CBR, check if we are dropping this frame. |
| // Never drop on key frame. |
| if (has_no_stats_stage(cpi) && oxcf->rc_cfg.mode == AOM_CBR && |
| current_frame->frame_type != KEY_FRAME) { |
| if (av1_rc_drop_frame(cpi)) { |
| av1_setup_frame_size(cpi); |
| av1_rc_postencode_update_drop_frame(cpi); |
| release_scaled_references(cpi); |
| return AOM_CODEC_OK; |
| } |
| } |
| |
| if (oxcf->tune_cfg.tuning == AOM_TUNE_SSIM) |
| av1_set_mb_ssim_rdmult_scaling(cpi); |
| |
| #if CONFIG_TUNE_VMAF |
| if (oxcf->tune_cfg.tuning == AOM_TUNE_VMAF_WITHOUT_PREPROCESSING || |
| oxcf->tune_cfg.tuning == AOM_TUNE_VMAF_MAX_GAIN || |
| oxcf->tune_cfg.tuning == AOM_TUNE_VMAF_NEG_MAX_GAIN) { |
| av1_set_mb_vmaf_rdmult_scaling(cpi); |
| } |
| #endif |
| |
| aom_clear_system_state(); |
| |
| if (seq_params->frame_id_numbers_present_flag) { |
| /* Non-normative definition of current_frame_id ("frame counter" with |
| * wraparound) */ |
| if (cm->current_frame_id == -1) { |
| int lsb, msb; |
| /* quasi-random initialization of current_frame_id for a key frame */ |
| lsb = cpi->source->y_buffer[0] & 0xff; |
| msb = cpi->source->y_buffer[1] & 0xff; |
| cm->current_frame_id = |
| ((msb << 8) + lsb) % (1 << seq_params->frame_id_length); |
| |
| // S_frame is meant for stitching different streams of different |
| // resolutions together, so current_frame_id must be the |
| // same across different streams of the same content current_frame_id |
| // should be the same and not random. 0x37 is a chosen number as start |
| // point |
| if (oxcf->kf_cfg.sframe_dist != 0) cm->current_frame_id = 0x37; |
| } else { |
| cm->current_frame_id = |
| (cm->current_frame_id + 1 + (1 << seq_params->frame_id_length)) % |
| (1 << seq_params->frame_id_length); |
| } |
| } |
| |
| switch (oxcf->algo_cfg.cdf_update_mode) { |
| case 0: // No CDF update for any frames(4~6% compression loss). |
| features->disable_cdf_update = 1; |
| break; |
| case 1: // Enable CDF update for all frames. |
| features->disable_cdf_update = 0; |
| break; |
| case 2: |
| // Strategically determine at which frames to do CDF update. |
| // Currently only enable CDF update for all-intra and no-show frames(1.5% |
| // compression loss). |
| // TODO(huisu@google.com): design schemes for various trade-offs between |
| // compression quality and decoding speed. |
| features->disable_cdf_update = |
| (frame_is_intra_only(cm) || !cm->show_frame) ? 0 : 1; |
| break; |
| } |
| seq_params->timing_info_present &= !seq_params->reduced_still_picture_hdr; |
| |
| if (cpi->oxcf.tool_cfg.enable_global_motion && !frame_is_intra_only(cm)) { |
| // Flush any stale global motion information, which may be left over |
| // from a previous frame |
| aom_invalidate_pyramid(cpi->source->y_pyramid); |
| av1_invalidate_corner_list(cpi->source->corners); |
| } |
| |
| int largest_tile_id = 0; |
| if (av1_superres_in_recode_allowed(cpi)) { |
| if (encode_with_and_without_superres(cpi, size, dest, &largest_tile_id) != |
| AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| } else { |
| const aom_superres_mode orig_superres_mode = cpi->superres_mode; // save |
| cpi->superres_mode = cpi->oxcf.superres_cfg.superres_mode; |
| if (encode_with_recode_loop_and_filter(cpi, size, dest, NULL, NULL, |
| &largest_tile_id) != AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| cpi->superres_mode = orig_superres_mode; // restore |
| } |
| |
| cpi->seq_params_locked = 1; |
| |
| // Update reference frame ids for reference frames this frame will overwrite |
| if (seq_params->frame_id_numbers_present_flag) { |
| for (int i = 0; i < REF_FRAMES; i++) { |
| if ((current_frame->refresh_frame_flags >> i) & 1) { |
| cm->ref_frame_id[i] = cm->current_frame_id; |
| } |
| } |
| } |
| |
| if (cm->seg.enabled) { |
| if (cm->seg.update_map) { |
| update_reference_segmentation_map(cpi); |
| } else if (cm->last_frame_seg_map) { |
| memcpy(cm->cur_frame->seg_map, cm->last_frame_seg_map, |
| cm->cur_frame->mi_cols * cm->cur_frame->mi_rows * |
| sizeof(*cm->cur_frame->seg_map)); |
| } |
| } |
| |
| if (frame_is_intra_only(cm) == 0) { |
| release_scaled_references(cpi); |
| } |
| |
| // NOTE: Save the new show frame buffer index for --test-code=warn, i.e., |
| // for the purpose to verify no mismatch between encoder and decoder. |
| if (cm->show_frame) cpi->last_show_frame_buf = cm->cur_frame; |
| |
| refresh_reference_frames(cpi); |
| |
| #if CONFIG_ENTROPY_STATS |
| av1_accumulate_frame_counts(&aggregate_fc, &cpi->counts); |
| #endif // CONFIG_ENTROPY_STATS |
| |
| if (features->refresh_frame_context == REFRESH_FRAME_CONTEXT_BACKWARD) { |
| *cm->fc = cpi->tile_data[largest_tile_id].tctx; |
| av1_reset_cdf_symbol_counters(cm->fc); |
| } |
| if (!cm->tiles.large_scale) { |
| cm->cur_frame->frame_context = *cm->fc; |
| } |
| |
| if (tile_cfg->enable_ext_tile_debug) { |
| // (yunqing) This test ensures the correctness of large scale tile coding. |
| if (cm->tiles.large_scale && is_stat_consumption_stage(cpi)) { |
| char fn[20] = "./fc"; |
| fn[4] = current_frame->frame_number / 100 + '0'; |
| fn[5] = (current_frame->frame_number % 100) / 10 + '0'; |
| fn[6] = (current_frame->frame_number % 10) + '0'; |
| fn[7] = '\0'; |
| av1_print_frame_contexts(cm->fc, fn); |
| } |
| } |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, encode_frame_to_data_rate_time); |
| |
| // Print out timing information. |
| int i; |
| fprintf(stderr, "\n Frame number: %d, Frame type: %s, Show Frame: %d\n", |
| cm->current_frame.frame_number, |
| get_frame_type_enum(cm->current_frame.frame_type), cm->show_frame); |
| for (i = 0; i < kTimingComponents; i++) { |
| cpi->component_time[i] += cpi->frame_component_time[i]; |
| fprintf(stderr, " %s: %" PRId64 " us (total: %" PRId64 " us)\n", |
| get_component_name(i), cpi->frame_component_time[i], |
| cpi->component_time[i]); |
| cpi->frame_component_time[i] = 0; |
| } |
| #endif |
| |
| cpi->last_frame_type = current_frame->frame_type; |
| |
| av1_rc_postencode_update(cpi, *size); |
| |
| // Clear the one shot update flags for segmentation map and mode/ref loop |
| // filter deltas. |
| cm->seg.update_map = 0; |
| cm->seg.update_data = 0; |
| cm->lf.mode_ref_delta_update = 0; |
| |
| // A droppable frame might not be shown but it always |
| // takes a space in the gf group. Therefore, even when |
| // it is not shown, we still need update the count down. |
| if (cm->show_frame) { |
| // Don't increment frame counters if this is a key frame overlay |
| if (!av1_check_keyframe_overlay(cpi->gf_group.index, &cpi->gf_group, |
| cpi->rc.frames_since_key)) |
| ++current_frame->frame_number; |
| } else if (av1_check_keyframe_arf(cpi->gf_group.index, &cpi->gf_group, |
| cpi->rc.frames_since_key)) { |
| // TODO(bohanli) Hack here: increment kf overlay before it is encoded |
| ++current_frame->frame_number; |
| } |
| |
| return AOM_CODEC_OK; |
| } |
| |
| int av1_encode(AV1_COMP *const cpi, uint8_t *const dest, |
| const EncodeFrameInput *const frame_input, |
| const EncodeFrameParams *const frame_params, |
| EncodeFrameResults *const frame_results) { |
| AV1_COMMON *const cm = &cpi->common; |
| CurrentFrame *const current_frame = &cm->current_frame; |
| |
| cpi->unscaled_source = frame_input->source; |
| cpi->source = frame_input->source; |
| cpi->unscaled_last_source = frame_input->last_source; |
| |
| current_frame->refresh_frame_flags = frame_params->refresh_frame_flags; |
| cm->features.error_resilient_mode = frame_params->error_resilient_mode; |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT |
| cm->features.primary_ref_frame = frame_params->primary_ref_frame; |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT |
| cm->current_frame.frame_type = frame_params->frame_type; |
| cm->show_frame = frame_params->show_frame; |
| cm->ref_frame_flags = frame_params->ref_frame_flags; |
| cpi->speed = frame_params->speed; |
| cm->show_existing_frame = frame_params->show_existing_frame; |
| cpi->existing_fb_idx_to_show = frame_params->existing_fb_idx_to_show; |
| |
| memcpy(cm->remapped_ref_idx, frame_params->remapped_ref_idx, |
| REF_FRAMES * sizeof(*cm->remapped_ref_idx)); |
| |
| if (current_frame->frame_type == KEY_FRAME && !cpi->no_show_fwd_kf) { |
| current_frame->key_frame_number += current_frame->frame_number; |
| current_frame->frame_number = 0; |
| } |
| |
| current_frame->order_hint = |
| current_frame->frame_number + frame_params->order_offset; |
| current_frame->display_order_hint = current_frame->order_hint; |
| current_frame->pyramid_level = get_true_pyr_level( |
| cpi->gf_group.layer_depth[cpi->gf_group.index], |
| current_frame->display_order_hint, cpi->gf_group.max_layer_depth); |
| |
| current_frame->absolute_poc = |
| current_frame->key_frame_number + current_frame->display_order_hint; |
| |
| current_frame->order_hint %= |
| (1 << (cm->seq_params.order_hint_info.order_hint_bits_minus_1 + 1)); |
| |
| if (is_stat_generation_stage(cpi)) { |
| av1_first_pass(cpi, frame_input->ts_duration); |
| } else { |
| #if CONFIG_BITSTREAM_DEBUG |
| assert(cpi->oxcf.max_threads <= 1 && |
| "bitstream debug tool does not support multithreading"); |
| bitstream_queue_record_write(); |
| aom_bitstream_queue_set_frame_write(cm->current_frame.order_hint * 2 + |
| cm->show_frame); |
| #endif // CONFIG_BITSTREAM_DEBUG |
| if (encode_frame_to_data_rate(cpi, &frame_results->size, dest) != |
| AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| } |
| return AOM_CODEC_OK; |
| } |
| |
| #if CONFIG_DENOISE |
| static int apply_denoise_2d(AV1_COMP *cpi, YV12_BUFFER_CONFIG *sd, |
| int block_size, float noise_level, |
| int64_t time_stamp, int64_t end_time) { |
| AV1_COMMON *const cm = &cpi->common; |
| if (!cpi->denoise_and_model) { |
| cpi->denoise_and_model = aom_denoise_and_model_alloc( |
| cm->seq_params.bit_depth, block_size, noise_level); |
| if (!cpi->denoise_and_model) { |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Error allocating denoise and model"); |
| return -1; |
| } |
| } |
| if (!cpi->film_grain_table) { |
| cpi->film_grain_table = aom_malloc(sizeof(*cpi->film_grain_table)); |
| if (!cpi->film_grain_table) { |
| aom_internal_error(&cm->error, AOM_CODEC_MEM_ERROR, |
| "Error allocating grain table"); |
| return -1; |
| } |
| memset(cpi->film_grain_table, 0, sizeof(*cpi->film_grain_table)); |
| } |
| if (aom_denoise_and_model_run(cpi->denoise_and_model, sd, |
| &cm->film_grain_params)) { |
| if (cm->film_grain_params.apply_grain) { |
| aom_film_grain_table_append(cpi->film_grain_table, time_stamp, end_time, |
| &cm->film_grain_params); |
| } |
| } |
| return 0; |
| } |
| #endif |
| |
| int av1_receive_raw_frame(AV1_COMP *cpi, aom_enc_frame_flags_t frame_flags, |
| YV12_BUFFER_CONFIG *sd, int64_t time_stamp, |
| int64_t end_time) { |
| AV1_COMMON *const cm = &cpi->common; |
| const SequenceHeader *const seq_params = &cm->seq_params; |
| int res = 0; |
| const int subsampling_x = sd->subsampling_x; |
| const int subsampling_y = sd->subsampling_y; |
| |
| #if CONFIG_TUNE_VMAF |
| if (!is_stat_generation_stage(cpi) && |
| cpi->oxcf.tune_cfg.tuning == AOM_TUNE_VMAF_WITH_PREPROCESSING) { |
| av1_vmaf_frame_preprocessing(cpi, sd); |
| } |
| if (!is_stat_generation_stage(cpi) && |
| cpi->oxcf.tune_cfg.tuning == AOM_TUNE_VMAF_MAX_GAIN) { |
| av1_vmaf_blk_preprocessing(cpi, sd); |
| } |
| #endif |
| |
| #if CONFIG_INTERNAL_STATS |
| struct aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| #endif |
| #if CONFIG_DENOISE |
| if (cpi->oxcf.noise_level > 0) |
| if (apply_denoise_2d(cpi, sd, cpi->oxcf.noise_block_size, |
| cpi->oxcf.noise_level, time_stamp, end_time) < 0) |
| res = -1; |
| #endif // CONFIG_DENOISE |
| |
| if (av1_lookahead_push(cpi->lookahead, sd, time_stamp, end_time, frame_flags, |
| cpi->alloc_pyramid)) |
| res = -1; |
| #if CONFIG_INTERNAL_STATS |
| aom_usec_timer_mark(&timer); |
| cpi->time_receive_data += aom_usec_timer_elapsed(&timer); |
| #endif |
| |
| // Note: Regarding profile setting, the following checks are added to help |
| // choose a proper profile for the input video. The criterion is that all |
| // bitstreams must be designated as the lowest profile that match its content. |
| // E.G. A bitstream that contains 4:4:4 video must be designated as High |
| // Profile in the seq header, and likewise a bitstream that contains 4:2:2 |
| // bitstream must be designated as Professional Profile in the sequence |
| // header. |
| if ((seq_params->profile == PROFILE_0) && !seq_params->monochrome && |
| (subsampling_x != 1 || subsampling_y != 1)) { |
| aom_internal_error(&cm->error, AOM_CODEC_INVALID_PARAM, |
| "Non-4:2:0 color format requires profile 1 or 2"); |
| res = -1; |
| } |
| if ((seq_params->profile == PROFILE_1) && |
| !(subsampling_x == 0 && subsampling_y == 0)) { |
| aom_internal_error(&cm->error, AOM_CODEC_INVALID_PARAM, |
| "Profile 1 requires 4:4:4 color format"); |
| res = -1; |
| } |
| if ((seq_params->profile == PROFILE_2) && |
| (seq_params->bit_depth <= AOM_BITS_10) && |
| !(subsampling_x == 1 && subsampling_y == 0)) { |
| aom_internal_error(&cm->error, AOM_CODEC_INVALID_PARAM, |
| "Profile 2 bit-depth <= 10 requires 4:2:2 color format"); |
| res = -1; |
| } |
| |
| return res; |
| } |
| |
| #if CONFIG_INTERNAL_STATS |
| extern double av1_get_blockiness(const unsigned char *img1, int img1_pitch, |
| const unsigned char *img2, int img2_pitch, |
| int width, int height); |
| |
| static void adjust_image_stat(double y, double u, double v, double all, |
| ImageStat *s) { |
| s->stat[STAT_Y] += y; |
| s->stat[STAT_U] += u; |
| s->stat[STAT_V] += v; |
| s->stat[STAT_ALL] += all; |
| s->worst = AOMMIN(s->worst, all); |
| } |
| |
| static void compute_internal_stats(AV1_COMP *cpi, int frame_bytes) { |
| AV1_COMMON *const cm = &cpi->common; |
| const uint32_t in_bit_depth = cpi->oxcf.input_cfg.input_bit_depth; |
| const uint32_t bit_depth = cpi->td.mb.e_mbd.bd; |
| |
| #if CONFIG_INTER_STATS_ONLY |
| if (cm->current_frame.frame_type == KEY_FRAME) return; // skip key frame |
| #endif |
| cpi->bytes += frame_bytes; |
| if (cm->show_frame) { |
| const YV12_BUFFER_CONFIG *orig = cpi->source; |
| const YV12_BUFFER_CONFIG *recon = &cpi->common.cur_frame->buf; |
| double y, u, v, frame_all; |
| |
| cpi->count[0]++; |
| cpi->count[1]++; |
| if (cpi->b_calculate_psnr) { |
| PSNR_STATS psnr; |
| double frame_ssim2 = 0.0, weight = 0.0; |
| aom_clear_system_state(); |
| aom_calc_highbd_psnr(orig, recon, &psnr, bit_depth, in_bit_depth); |
| adjust_image_stat(psnr.psnr[1], psnr.psnr[2], psnr.psnr[3], psnr.psnr[0], |
| &(cpi->psnr[0])); |
| cpi->total_sq_error[0] += psnr.sse[0]; |
| cpi->total_samples[0] += psnr.samples[0]; |
| frame_ssim2 = |
| aom_highbd_calc_ssim(orig, recon, &weight, bit_depth, in_bit_depth); |
| |
| cpi->worst_ssim = AOMMIN(cpi->worst_ssim, frame_ssim2); |
| cpi->summed_quality += frame_ssim2 * weight; |
| cpi->summed_weights += weight; |
| |
| // Compute PSNR based on stream bit depth |
| if (in_bit_depth < bit_depth) { |
| adjust_image_stat(psnr.psnr_hbd[1], psnr.psnr_hbd[2], psnr.psnr_hbd[3], |
| psnr.psnr_hbd[0], &cpi->psnr[1]); |
| cpi->total_sq_error[1] += psnr.sse_hbd[0]; |
| cpi->total_samples[1] += psnr.samples_hbd[0]; |
| } |
| |
| #if 0 |
| { |
| FILE *f = fopen("q_used.stt", "a"); |
| double y2 = psnr.psnr[1]; |
| double u2 = psnr.psnr[2]; |
| double v2 = psnr.psnr[3]; |
| double frame_psnr2 = psnr.psnr[0]; |
| fprintf(f, "%5d : Y%f7.3:U%f7.3:V%f7.3:F%f7.3:S%7.3f\n", |
| cm->current_frame.frame_number, y2, u2, v2, |
| frame_psnr2, frame_ssim2); |
| fclose(f); |
| } |
| #endif |
| } |
| |
| frame_all = |
| aom_calc_fastssim(orig, recon, &y, &u, &v, bit_depth, in_bit_depth); |
| adjust_image_stat(y, u, v, frame_all, &cpi->fastssim); |
| frame_all = aom_psnrhvs(orig, recon, &y, &u, &v, bit_depth, in_bit_depth); |
| adjust_image_stat(y, u, v, frame_all, &cpi->psnrhvs); |
| } |
| } |
| #endif // CONFIG_INTERNAL_STATS |
| |
| int av1_get_compressed_data(AV1_COMP *cpi, unsigned int *frame_flags, |
| size_t *size, uint8_t *dest, int64_t *time_stamp, |
| int64_t *time_end, int flush, |
| const aom_rational64_t *timestamp_ratio) { |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| AV1_COMMON *const cm = &cpi->common; |
| |
| cm->showable_frame = 0; |
| *size = 0; |
| #if CONFIG_INTERNAL_STATS |
| struct aom_usec_timer cmptimer; |
| aom_usec_timer_start(&cmptimer); |
| #endif |
| |
| av1_set_high_precision_mv(cpi, MV_PRECISION_ONE_EIGHTH_PEL); |
| |
| // Normal defaults |
| cm->features.refresh_frame_context = |
| oxcf->tool_cfg.frame_parallel_decoding_mode |
| ? REFRESH_FRAME_CONTEXT_DISABLED |
| : REFRESH_FRAME_CONTEXT_BACKWARD; |
| if (oxcf->tile_cfg.enable_large_scale_tile) |
| cm->features.refresh_frame_context = REFRESH_FRAME_CONTEXT_DISABLED; |
| |
| // Initialize fields related to forward keyframes |
| cpi->no_show_fwd_kf = 0; |
| |
| if (assign_cur_frame_new_fb(cm) == NULL) return AOM_CODEC_ERROR; |
| |
| const int result = |
| av1_encode_strategy(cpi, size, dest, frame_flags, time_stamp, time_end, |
| timestamp_ratio, flush); |
| if (result == -1) { |
| // Returning -1 indicates no frame encoded; more input is required |
| return -1; |
| } |
| if (result != AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| #if CONFIG_INTERNAL_STATS |
| aom_usec_timer_mark(&cmptimer); |
| cpi->time_compress_data += aom_usec_timer_elapsed(&cmptimer); |
| #endif // CONFIG_INTERNAL_STATS |
| if (cpi->b_calculate_psnr) { |
| if (cm->show_existing_frame || |
| (*size > 0 && !is_stat_generation_stage(cpi) && cm->show_frame)) { |
| generate_psnr_packet(cpi); |
| } |
| } |
| |
| if (cpi->level_params.keep_level_stats && !is_stat_generation_stage(cpi)) { |
| // Initialize level info. at the beginning of each sequence. |
| if (cm->current_frame.frame_type == KEY_FRAME && !cpi->no_show_fwd_kf) { |
| av1_init_level_info(cpi); |
| } |
| av1_update_level_info(cpi, *size, *time_stamp, *time_end); |
| } |
| |
| #if CONFIG_INTERNAL_STATS |
| if (!is_stat_generation_stage(cpi)) { |
| compute_internal_stats(cpi, (int)(*size)); |
| } |
| #endif // CONFIG_INTERNAL_STATS |
| #if CONFIG_SPEED_STATS |
| if (!is_stat_generation_stage(cpi) && !cm->show_existing_frame) { |
| cpi->tx_search_count += cpi->td.mb.txfm_search_info.tx_search_count; |
| cpi->td.mb.txfm_search_info.tx_search_count = 0; |
| } |
| #endif // CONFIG_SPEED_STATS |
| |
| aom_clear_system_state(); |
| |
| return AOM_CODEC_OK; |
| } |
| |
| int av1_get_preview_raw_frame(AV1_COMP *cpi, YV12_BUFFER_CONFIG *dest) { |
| AV1_COMMON *cm = &cpi->common; |
| if (!cm->show_frame) { |
| return -1; |
| } else { |
| int ret; |
| if (cm->cur_frame != NULL) { |
| *dest = cm->cur_frame->buf; |
| dest->y_width = cm->width; |
| dest->y_height = cm->height; |
| dest->uv_width = cm->width >> cm->seq_params.subsampling_x; |
| dest->uv_height = cm->height >> cm->seq_params.subsampling_y; |
| ret = 0; |
| } else { |
| ret = -1; |
| } |
| aom_clear_system_state(); |
| return ret; |
| } |
| } |
| |
| int av1_get_last_show_frame(AV1_COMP *cpi, YV12_BUFFER_CONFIG *frame) { |
| if (cpi->last_show_frame_buf == NULL) return -1; |
| |
| *frame = cpi->last_show_frame_buf->buf; |
| return 0; |
| } |
| |
| aom_codec_err_t av1_copy_new_frame_enc(AV1_COMMON *cm, |
| YV12_BUFFER_CONFIG *new_frame, |
| YV12_BUFFER_CONFIG *sd) { |
| const int num_planes = av1_num_planes(cm); |
| if (!equal_dimensions_and_border(new_frame, sd)) |
| aom_internal_error(&cm->error, AOM_CODEC_ERROR, |
| "Incorrect buffer dimensions"); |
| else |
| aom_yv12_copy_frame(new_frame, sd, num_planes); |
| |
| return cm->error.error_code; |
| } |
| |
| int av1_set_internal_size(AV1EncoderConfig *const oxcf, |
| ResizePendingParams *resize_pending_params, |
| AOM_SCALING horiz_mode, AOM_SCALING vert_mode) { |
| int hr = 0, hs = 0, vr = 0, vs = 0; |
| |
| if (horiz_mode > ONETWO || vert_mode > ONETWO) return -1; |
| |
| Scale2Ratio(horiz_mode, &hr, &hs); |
| Scale2Ratio(vert_mode, &vr, &vs); |
| |
| // always go to the next whole number |
| resize_pending_params->width = (hs - 1 + oxcf->frm_dim_cfg.width * hr) / hs; |
| resize_pending_params->height = (vs - 1 + oxcf->frm_dim_cfg.height * vr) / vs; |
| |
| if (horiz_mode != NORMAL || vert_mode != NORMAL) { |
| oxcf->resize_cfg.resize_mode = RESIZE_FIXED; |
| oxcf->algo_cfg.enable_tpl_model = 0; |
| } |
| return 0; |
| } |
| |
| int av1_get_quantizer(AV1_COMP *cpi) { |
| return cpi->common.quant_params.base_qindex; |
| } |
| |
| int av1_convert_sect5obus_to_annexb(uint8_t *buffer, size_t *frame_size) { |
| size_t output_size = 0; |
| size_t total_bytes_read = 0; |
| size_t remaining_size = *frame_size; |
| uint8_t *buff_ptr = buffer; |
| |
| // go through each OBUs |
| while (total_bytes_read < *frame_size) { |
| uint8_t saved_obu_header[2]; |
| uint64_t obu_payload_size; |
| size_t length_of_payload_size; |
| size_t length_of_obu_size; |
| uint32_t obu_header_size = (buff_ptr[0] >> 2) & 0x1 ? 2 : 1; |
| size_t obu_bytes_read = obu_header_size; // bytes read for current obu |
| |
| // save the obu header (1 or 2 bytes) |
| memmove(saved_obu_header, buff_ptr, obu_header_size); |
| // clear the obu_has_size_field |
| saved_obu_header[0] = saved_obu_header[0] & (~0x2); |
| |
| // get the payload_size and length of payload_size |
| if (aom_uleb_decode(buff_ptr + obu_header_size, remaining_size, |
| &obu_payload_size, &length_of_payload_size) != 0) { |
| return AOM_CODEC_ERROR; |
| } |
| obu_bytes_read += length_of_payload_size; |
| |
| // calculate the length of size of the obu header plus payload |
| length_of_obu_size = |
| aom_uleb_size_in_bytes((uint64_t)(obu_header_size + obu_payload_size)); |
| |
| // move the rest of data to new location |
| memmove(buff_ptr + length_of_obu_size + obu_header_size, |
| buff_ptr + obu_bytes_read, remaining_size - obu_bytes_read); |
| obu_bytes_read += (size_t)obu_payload_size; |
| |
| // write the new obu size |
| const uint64_t obu_size = obu_header_size + obu_payload_size; |
| size_t coded_obu_size; |
| if (aom_uleb_encode(obu_size, sizeof(obu_size), buff_ptr, |
| &coded_obu_size) != 0) { |
| return AOM_CODEC_ERROR; |
| } |
| |
| // write the saved (modified) obu_header following obu size |
| memmove(buff_ptr + length_of_obu_size, saved_obu_header, obu_header_size); |
| |
| total_bytes_read += obu_bytes_read; |
| remaining_size -= obu_bytes_read; |
| buff_ptr += length_of_obu_size + obu_size; |
| output_size += length_of_obu_size + (size_t)obu_size; |
| } |
| |
| *frame_size = output_size; |
| return AOM_CODEC_OK; |
| } |
| |
| void av1_apply_encoding_flags(AV1_COMP *cpi, aom_enc_frame_flags_t flags) { |
| // TODO(yunqingwang): For what references to use, external encoding flags |
| // should be consistent with internal reference frame selection. Need to |
| // ensure that there is not conflict between the two. In AV1 encoder, the |
| // priority rank for 7 reference frames are: LAST, ALTREF, LAST2, LAST3, |
| // GOLDEN, BWDREF, ALTREF2. |
| |
| ExternalFlags *const ext_flags = &cpi->ext_flags; |
| ExtRefreshFrameFlagsInfo *const ext_refresh_frame_flags = |
| &ext_flags->refresh_frame; |
| ext_flags->ref_frame_flags = AOM_REFFRAME_ALL; |
| |
| if (flags & AOM_EFLAG_NO_UPD_ALL) { |
| ext_refresh_frame_flags->all_ref_frames = 0; |
| ext_refresh_frame_flags->update_pending = 1; |
| } else { |
| ext_refresh_frame_flags->all_ref_frames = 1; |
| ext_refresh_frame_flags->update_pending = 0; |
| } |
| |
| ext_flags->use_ref_frame_mvs = cpi->oxcf.tool_cfg.enable_ref_frame_mvs & |
| ((flags & AOM_EFLAG_NO_REF_FRAME_MVS) == 0); |
| ext_flags->use_error_resilient = cpi->oxcf.tool_cfg.error_resilient_mode | |
| ((flags & AOM_EFLAG_ERROR_RESILIENT) != 0); |
| ext_flags->use_s_frame = |
| cpi->oxcf.kf_cfg.enable_sframe | ((flags & AOM_EFLAG_SET_S_FRAME) != 0); |
| ext_flags->use_primary_ref_none = |
| (flags & AOM_EFLAG_SET_PRIMARY_REF_NONE) != 0; |
| |
| if (flags & AOM_EFLAG_NO_UPD_ENTROPY) { |
| update_entropy(&ext_flags->refresh_frame_context, |
| &ext_flags->refresh_frame_context_pending, 0); |
| } |
| } |
| |
| aom_fixed_buf_t *av1_get_global_headers(AV1_COMP *cpi) { |
| if (!cpi) return NULL; |
| |
| uint8_t header_buf[512] = { 0 }; |
| const uint32_t sequence_header_size = |
| av1_write_sequence_header_obu(&cpi->common.seq_params, &header_buf[0]); |
| assert(sequence_header_size <= sizeof(header_buf)); |
| if (sequence_header_size == 0) return NULL; |
| |
| const size_t obu_header_size = 1; |
| const size_t size_field_size = aom_uleb_size_in_bytes(sequence_header_size); |
| const size_t payload_offset = obu_header_size + size_field_size; |
| |
| if (payload_offset + sequence_header_size > sizeof(header_buf)) return NULL; |
| memmove(&header_buf[payload_offset], &header_buf[0], sequence_header_size); |
| |
| if (av1_write_obu_header(&cpi->level_params, OBU_SEQUENCE_HEADER, 0, |
| &header_buf[0]) != obu_header_size) { |
| return NULL; |
| } |
| |
| size_t coded_size_field_size = 0; |
| if (aom_uleb_encode(sequence_header_size, size_field_size, |
| &header_buf[obu_header_size], |
| &coded_size_field_size) != 0) { |
| return NULL; |
| } |
| assert(coded_size_field_size == size_field_size); |
| |
| aom_fixed_buf_t *global_headers = |
| (aom_fixed_buf_t *)malloc(sizeof(*global_headers)); |
| if (!global_headers) return NULL; |
| |
| const size_t global_header_buf_size = |
| obu_header_size + size_field_size + sequence_header_size; |
| |
| global_headers->buf = malloc(global_header_buf_size); |
| if (!global_headers->buf) { |
| free(global_headers); |
| return NULL; |
| } |
| |
| memcpy(global_headers->buf, &header_buf[0], global_header_buf_size); |
| global_headers->sz = global_header_buf_size; |
| return global_headers; |
| } |