| /* | |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 3-Clause Clear License | |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear | |
| * License was not distributed with this source code in the LICENSE file, you | |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the | |
| * Alliance for Open Media Patent License 1.0 was not distributed with this | |
| * source code in the PATENTS file, you can obtain it at | |
| * aomedia.org/license/patent-license/. | |
| */ | |
| #ifndef AOM_AV1_COMMON_RECONINTER_H_ | |
| #define AOM_AV1_COMMON_RECONINTER_H_ | |
| #include "av1/common/av1_common_int.h" | |
| #include "av1/common/convolve.h" | |
| #include "av1/common/filter.h" | |
| #include "av1/common/warped_motion.h" | |
| #include "aom/aom_integer.h" | |
| #if CONFIG_WEDGE_MOD_EXT | |
| #include "av1/encoder/block.h" | |
| #endif | |
| // Work out how many pixels off the edge of a reference frame we're allowed | |
| // to go when forming an inter prediction. | |
| // The outermost row/col of each referernce frame is extended by | |
| // (AOM_BORDER_IN_PIXELS >> subsampling) pixels, but we need to keep | |
| // at least AOM_INTERP_EXTEND pixels within that to account for filtering. | |
| // | |
| // We have to break this up into two macros to keep both clang-format and | |
| // tools/lint-hunks.py happy. | |
| #define AOM_LEFT_TOP_MARGIN_PX(subsampling) \ | |
| ((AOM_BORDER_IN_PIXELS >> subsampling) - AOM_INTERP_EXTEND) | |
| #define AOM_LEFT_TOP_MARGIN_SCALED(subsampling) \ | |
| (AOM_LEFT_TOP_MARGIN_PX(subsampling) << SCALE_SUBPEL_BITS) | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| #if !CONFIG_WEDGE_MOD_EXT | |
| #define MAX_WEDGE_TYPES 16 | |
| #endif | |
| #if CONFIG_WEDGE_MOD_EXT | |
| #define MAX_WEDGE_SIZE_LOG2 6 // 64x64 | |
| #else | |
| #define MAX_WEDGE_SIZE_LOG2 5 // 32x32 | |
| #endif | |
| #define MAX_WEDGE_SIZE (1 << MAX_WEDGE_SIZE_LOG2) | |
| #define MAX_WEDGE_SQUARE (MAX_WEDGE_SIZE * MAX_WEDGE_SIZE) | |
| #define WEDGE_WEIGHT_BITS 6 | |
| #define WEDGE_NONE -1 | |
| #if CONFIG_WEDGE_MOD_EXT | |
| static const int wedge_angle_dist_2_index[WEDGE_ANGLES][NUM_WEDGE_DIST] = { | |
| { -1, 0, 1, 2 }, // WEDGE_0 | |
| { 3, 4, 5, 6 }, // WEDGE_14 | |
| { 7, 8, 9, 10 }, // WEDGE_27 | |
| { 11, 12, 13, 14 }, // WEDGE_45 | |
| { 15, 16, 17, 18 }, // WEDGE_63 | |
| { -1, 19, 20, 21 }, // WEDGE_90 | |
| { 22, 23, 24, 25 }, // WEDGE_117 | |
| { 26, 27, 28, 29 }, // WEDGE_135 | |
| { 30, 31, 32, 33 }, // WEDGE_153 | |
| { 34, 35, 36, 37 }, // WEDGE_166 | |
| { -1, 38, 39, 40 }, // WEDGE_180 | |
| { -1, 41, 42, 43 }, // WEDGE_194 | |
| { -1, 44, 45, 46 }, // WEDGE_207 | |
| { -1, 47, 48, 49 }, // WEDGE_225 | |
| { -1, 50, 51, 52 }, // WEDGE_243 | |
| { -1, 53, 54, 55 }, // WEDGE_270 | |
| { -1, 56, 57, 58 }, // WEDGE_297 | |
| { -1, 59, 60, 61 }, // WEDGE_315 | |
| { -1, 62, 63, 64 }, // WEDGE_333 | |
| { -1, 65, 66, 67 }, // WEDGE_346 | |
| }; | |
| static const int wedge_index_2_angle[MAX_WEDGE_TYPES] = { | |
| WEDGE_0, WEDGE_0, WEDGE_0, // WEDGE_0 | |
| WEDGE_14, WEDGE_14, WEDGE_14, WEDGE_14, // WEDGE_14 | |
| WEDGE_27, WEDGE_27, WEDGE_27, WEDGE_27, // WEDGE_27 | |
| WEDGE_45, WEDGE_45, WEDGE_45, WEDGE_45, // WEDGE_45 | |
| WEDGE_63, WEDGE_63, WEDGE_63, WEDGE_63, // WEDGE_63 | |
| WEDGE_90, WEDGE_90, WEDGE_90, // WEDGE_90 | |
| WEDGE_117, WEDGE_117, WEDGE_117, WEDGE_117, // WEDGE_117 | |
| WEDGE_135, WEDGE_135, WEDGE_135, WEDGE_135, // WEDGE_135 | |
| WEDGE_153, WEDGE_153, WEDGE_153, WEDGE_153, // WEDGE_153 | |
| WEDGE_166, WEDGE_166, WEDGE_166, WEDGE_166, // WEDGE_166 | |
| WEDGE_180, WEDGE_180, WEDGE_180, // WEDGE_180 | |
| WEDGE_194, WEDGE_194, WEDGE_194, // WEDGE_194 | |
| WEDGE_207, WEDGE_207, WEDGE_207, // WEDGE_207 | |
| WEDGE_225, WEDGE_225, WEDGE_225, // WEDGE_225 | |
| WEDGE_243, WEDGE_243, WEDGE_243, // WEDGE_243 | |
| WEDGE_270, WEDGE_270, WEDGE_270, // WEDGE_270 | |
| WEDGE_297, WEDGE_297, WEDGE_297, // WEDGE_297 | |
| WEDGE_315, WEDGE_315, WEDGE_315, // WEDGE_315 | |
| WEDGE_333, WEDGE_333, WEDGE_333, // WEDGE_333 | |
| WEDGE_346, WEDGE_346, WEDGE_346 // WEDGE_346 | |
| }; | |
| static const int wedge_index_2_dist[MAX_WEDGE_TYPES] = { | |
| 1, 2, 3, // WEDGE_0 | |
| 0, 1, 2, 3, // WEDGE_14 | |
| 0, 1, 2, 3, // WEDGE_27 | |
| 0, 1, 2, 3, // WEDGE_45 | |
| 0, 1, 2, 3, // WEDGE_63 | |
| 1, 2, 3, // WEDGE_90 | |
| 0, 1, 2, 3, // WEDGE_117 | |
| 0, 1, 2, 3, // WEDGE_135 | |
| 0, 1, 2, 3, // WEDGE_153 | |
| 0, 1, 2, 3, // WEDGE_166 | |
| 1, 2, 3, // WEDGE_180 | |
| 1, 2, 3, // WEDGE_194 | |
| 1, 2, 3, // WEDGE_207 | |
| 1, 2, 3, // WEDGE_225 | |
| 1, 2, 3, // WEDGE_243 | |
| 1, 2, 3, // WEDGE_270 | |
| 1, 2, 3, // WEDGE_297 | |
| 1, 2, 3, // WEDGE_315 | |
| 1, 2, 3, // WEDGE_333 | |
| 1, 2, 3, // WEDGE_346 | |
| }; | |
| #endif // CONFIG_WEDGE_MOD_EXT | |
| #if CONFIG_BAWP | |
| #define BAWP_REF_LINES 1 | |
| #endif | |
| // Angles are with respect to horizontal anti-clockwise | |
| #if !CONFIG_WEDGE_MOD_EXT | |
| enum { | |
| WEDGE_HORIZONTAL = 0, | |
| WEDGE_VERTICAL = 1, | |
| WEDGE_OBLIQUE27 = 2, | |
| WEDGE_OBLIQUE63 = 3, | |
| WEDGE_OBLIQUE117 = 4, | |
| WEDGE_OBLIQUE153 = 5, | |
| WEDGE_DIRECTIONS | |
| } UENUM1BYTE(WedgeDirectionType); | |
| #endif | |
| // 3-tuple: {direction, x_offset, y_offset} | |
| typedef struct { | |
| WedgeDirectionType direction; | |
| int x_offset; | |
| int y_offset; | |
| } wedge_code_type; | |
| typedef uint8_t *wedge_masks_type[MAX_WEDGE_TYPES]; | |
| typedef struct { | |
| int wedge_types; | |
| const wedge_code_type *codebook; | |
| uint8_t *signflip; | |
| wedge_masks_type *masks; | |
| } wedge_params_type; | |
| extern const wedge_params_type av1_wedge_params_lookup[BLOCK_SIZES_ALL]; | |
| typedef struct SubpelParams { | |
| int xs; | |
| int ys; | |
| int subpel_x; | |
| int subpel_y; | |
| #if CONFIG_D071_IMP_MSK_BLD | |
| int x0; // top left sample horizontal cood. | |
| int y0; // top left sample vertical cood. | |
| int x1; // x0 + bw | |
| int y1; // y0 + bh | |
| #endif // CONFIG_D071_IMP_MSK_BLD | |
| } SubpelParams; | |
| struct build_prediction_ctxt { | |
| const AV1_COMMON *cm; | |
| uint16_t **tmp_buf; | |
| int *tmp_width; | |
| int *tmp_height; | |
| int *tmp_stride; | |
| int mb_to_far_edge; | |
| void *dcb; // Decoder-only coding block. | |
| }; | |
| #if CONFIG_REFINEMV | |
| #define REFINE_MV_MAX_OFFSET 1 | |
| #define REF_TOP_BORDER (AOM_INTERP_EXTEND - 1 + REFINE_MV_MAX_OFFSET) | |
| #define REF_LEFT_BORDER (AOM_INTERP_EXTEND - 1 + REFINE_MV_MAX_OFFSET) | |
| #define REF_RIGHT_BORDER (AOM_INTERP_EXTEND + REFINE_MV_MAX_OFFSET) | |
| #define REF_BOTTOM_BORDER (AOM_INTERP_EXTEND + REFINE_MV_MAX_OFFSET) | |
| #endif // CONFIG_REFINEMV | |
| typedef enum InterPredMode { | |
| TRANSLATION_PRED, | |
| WARP_PRED, | |
| } InterPredMode; | |
| typedef enum InterCompMode { | |
| UNIFORM_SINGLE, | |
| UNIFORM_COMP, | |
| MASK_COMP, | |
| } InterCompMode; | |
| typedef struct InterPredParams { | |
| InterPredMode mode; | |
| InterCompMode comp_mode; | |
| WarpedMotionParams warp_params; | |
| ConvolveParams conv_params; | |
| const InterpFilterParams *interp_filter_params[2]; | |
| int block_width; | |
| int block_height; | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| // In optical flow refinement, block_width and block_height will pass the | |
| // subblock size into av1_make_inter_predictor, while orig_block_width and | |
| // orig_block_height keep the original block size that is needed by | |
| // calc_subpel_params_func | |
| int orig_block_width; | |
| int orig_block_height; | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| #if CONFIG_REFINEMV | |
| // In refinemV, the prediction is generated maximum 16x16 sub-block basis | |
| // original_pu_width and original_pu_height represents the width and height | |
| // of the original block. | |
| int original_pu_width; | |
| int original_pu_height; | |
| #endif // CONFIG_REFINEMV | |
| int pix_row; | |
| int pix_col; | |
| struct buf_2d ref_frame_buf; | |
| int subsampling_x; | |
| int subsampling_y; | |
| const struct scale_factors *scale_factors; | |
| int bit_depth; | |
| INTERINTER_COMPOUND_DATA mask_comp; | |
| BLOCK_SIZE sb_type; | |
| int is_intrabc; | |
| /** | |
| * \name Distance of TIP block from frame edges in 1/8th pixel units. | |
| */ | |
| /**@{*/ | |
| int dist_to_left_edge; /*!< Distance from left edge */ | |
| int dist_to_right_edge; /*!< Distance from right edge */ | |
| int dist_to_top_edge; /*!< Distance from top edge */ | |
| int dist_to_bottom_edge; /*!< Distance from bottom edge */ | |
| #if CONFIG_REFINEMV | |
| int use_ref_padding; | |
| ReferenceArea *ref_area; | |
| #endif // CONFIG_REFINEMV | |
| #if CONFIG_D071_IMP_MSK_BLD | |
| INTERINTER_COMPOUND_BORDER_DATA border_data; | |
| #endif // CONFIG_D071_IMP_MSK_BLD | |
| } InterPredParams; | |
| #if CONFIG_AFFINE_REFINEMENT | |
| // Affine parameters per unit of temporal distance | |
| typedef struct AffineModelParams { | |
| int rot_angle; // rotation angle is d*rot_angle | |
| int scale_alpha; // x scaling factor is 1+d*scale_alpha | |
| int scale_beta; // y scaling factor is 1+d*scale_beta | |
| int tran_x; // x translation is d*tran_x | |
| int tran_y; // y translation is d*tran_y | |
| } AffineModelParams; | |
| static const AffineModelParams default_affine_params = { 0, 0, 0, 0, 0 }; | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| // Apply bilinear and bicubic interpolation for subpel gradient to avoid | |
| // calls of build_one_inter_predictor function. Bicubic interpolation | |
| // brings better quality but the speed results are neutral. As such, bilinear | |
| // interpolation is used by default for a better trade-off between quality | |
| // and complexity. | |
| #define OPFL_BILINEAR_GRAD 0 | |
| #define OPFL_BICUBIC_GRAD 1 | |
| // Use downsampled gradient arrays to compute MV offsets | |
| #define OPFL_DOWNSAMP_QUINCUNX 0 | |
| // Delta to use for computing gradients in bits, with 0 referring to | |
| // integer-pel. The actual delta value used from the 1/8-pel original MVs | |
| // is 2^(3 - SUBPEL_GRAD_DELTA_BITS). The max value of this macro is 3. | |
| #define SUBPEL_GRAD_DELTA_BITS 2 | |
| // Combine computations of interpolated gradients and the least squares | |
| // solver. The basic idea is that, typically we would compute the following: | |
| // 1. d0, d1, P0 and P1 | |
| // 2. Gradients of P0 and P1: gx0, gx1, gy0, and gy1 | |
| // 3. Solving least squares for vx and vy, which requires d0*gx0-d1*gx1, | |
| // d0*gy0-d1*gy1, and P0-P1. | |
| // When this flag is turned on, we compute the following | |
| // 1. d0, d1, P0 and P1 | |
| // 2. tmp0 = d0*P0-d1*P1 and tmp1 = P0-P1 | |
| // 3. Gradients of tmp0: gx and gy | |
| // 4. Solving least squares for vx and vy using gx, gy and tmp1 | |
| // Note that this only requires 2 gradient operators instead of 4 and thus | |
| // reduces the complexity. However, it is only feasible when gradients are | |
| // obtained using bilinear or bicubic interpolation. Thus, this flag should | |
| // only be on when either of OPFL_BILINEAR_GRAD and OPFL_BICUBIC_GRAD is on. | |
| #define OPFL_COMBINE_INTERP_GRAD_LS 1 | |
| // Bilinear and bicubic coefficients. Note that, at boundary, we apply | |
| // coefficients that are doubled because spatial distance between the two | |
| // interpolated pixels is halved. In other words, instead of computing | |
| // coeff * (v[delta] - v[-delta]) / (2 * delta), | |
| // we are practically computing | |
| // coeff * (v[delta] - v[0]) / (2 * delta). | |
| // Thus, coeff is doubled to get a better gradient quality. | |
| #if OPFL_BILINEAR_GRAD | |
| static const int bilinear_bits = 3; | |
| static const int32_t coeffs_bilinear[4][2] = { | |
| { 8, 16 }, // delta = 1 (SUBPEL_GRAD_DELTA_BITS = 0) | |
| { 4, 8 }, // delta = 0.5 (SUBPEL_GRAD_DELTA_BITS = 1) | |
| { 2, 4 }, // delta = 0.25 (SUBPEL_GRAD_DELTA_BITS = 2) | |
| { 1, 2 }, // delta = 0.125 (SUBPEL_GRAD_DELTA_BITS = 3) | |
| }; | |
| #endif | |
| #if OPFL_BICUBIC_GRAD | |
| static const int bicubic_bits = 7; | |
| static const int32_t coeffs_bicubic[4][2][2] = { | |
| { { 128, 256 }, { 0, 0 } }, // delta = 1 (SUBPEL_GRAD_DELTA_BITS = 0) | |
| { { 80, 160 }, { -8, -16 } }, // delta = 0.5 (SUBPEL_GRAD_DELTA_BITS = 1) | |
| { { 42, 84 }, { -5, -10 } }, // delta = 0.25 (SUBPEL_GRAD_DELTA_BITS = 2) | |
| { { 21, 42 }, { -3, -6 } }, // delta = 0.125 (SUBPEL_GRAD_DELTA_BITS = 3) | |
| }; | |
| #endif | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| void av1_init_inter_params(InterPredParams *inter_pred_params, int block_width, | |
| int block_height, int pix_row, int pix_col, | |
| int subsampling_x, int subsampling_y, int bit_depth, | |
| int is_intrabc, const struct scale_factors *sf, | |
| const struct buf_2d *ref_buf, | |
| InterpFilter interp_filter); | |
| #if CONFIG_EXTENDED_WARP_PREDICTION | |
| // Check if the signaling of the warp delta parameters are allowed | |
| static INLINE int allow_warp_parameter_signaling(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| return (mbmi->mode != WARPMV && cm->features.allow_warpmv_mode && | |
| mbmi->motion_mode == WARP_DELTA && mbmi->warp_ref_idx == 1); | |
| } | |
| #endif // CONFIG_EXTENDED_WARP_PREDICTION | |
| // Map the index to weighting factor for compound weighted prediction | |
| static INLINE int get_cwp_coding_idx(int val, int encode, | |
| const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *const mbmi) { | |
| int is_same_side = 0; | |
| int cur_ref_side = 0; | |
| int other_ref_side = 0; | |
| if (has_second_ref(mbmi)) { | |
| cur_ref_side = cm->ref_frame_side[mbmi->ref_frame[0]]; | |
| other_ref_side = cm->ref_frame_side[mbmi->ref_frame[1]]; | |
| is_same_side = (cur_ref_side > 0 && other_ref_side > 0) || | |
| (cur_ref_side == 0 && other_ref_side == 0); | |
| } | |
| if (encode) { | |
| for (int i = 0; i < MAX_CWP_NUM; i++) { | |
| if (cwp_weighting_factor[is_same_side][i] == val) return i; | |
| } | |
| return 0; | |
| } else { | |
| return cwp_weighting_factor[is_same_side][val]; | |
| } | |
| } | |
| static INLINE int enable_adaptive_mvd_resolution(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| const int mode = mbmi->mode; | |
| return (mode == NEAR_NEWMV || mode == NEW_NEARMV | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| || mode == NEAR_NEWMV_OPTFLOW || mode == NEW_NEARMV_OPTFLOW || | |
| mode == JOINT_AMVDNEWMV_OPTFLOW | |
| #endif | |
| || mode == AMVDNEWMV || mode == JOINT_AMVDNEWMV) && | |
| cm->seq_params.enable_adaptive_mvd; | |
| } | |
| // get the base reference frame list for joint MVD coding, the MVD for base | |
| // reference frame is the same as the joint MVD, the MVD for the other reference | |
| // frame is scaled from the joint MVD. | |
| static INLINE int get_joint_mvd_base_ref_list(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| int base_ref_list = 0; | |
| int first_ref_dist = 0; | |
| int sec_ref_dist = 0; | |
| if (has_second_ref(mbmi)) { | |
| first_ref_dist = cm->ref_frame_relative_dist[mbmi->ref_frame[0]]; | |
| sec_ref_dist = cm->ref_frame_relative_dist[mbmi->ref_frame[1]]; | |
| if (first_ref_dist >= sec_ref_dist) { | |
| base_ref_list = 0; | |
| } else { | |
| base_ref_list = 1; | |
| } | |
| } | |
| return base_ref_list; | |
| } | |
| // check whether the direction of two reference frames are from same side | |
| static INLINE int is_ref_frame_same_side(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| int is_same_side = 0; | |
| int cur_ref_side = 0; | |
| int other_ref_side = 0; | |
| if (has_second_ref(mbmi)) { | |
| cur_ref_side = cm->ref_frame_side[mbmi->ref_frame[0]]; | |
| other_ref_side = cm->ref_frame_side[mbmi->ref_frame[1]]; | |
| is_same_side = (cur_ref_side > 0 && other_ref_side > 0) || | |
| (cur_ref_side == 0 && other_ref_side == 0); | |
| } | |
| return is_same_side; | |
| } | |
| void av1_init_comp_mode(InterPredParams *inter_pred_params); | |
| void av1_init_warp_params(InterPredParams *inter_pred_params, | |
| const WarpTypesAllowed *warp_types, int ref, | |
| const MACROBLOCKD *xd, const MB_MODE_INFO *mi); | |
| static INLINE int has_scale(int xs, int ys) { | |
| return xs != SCALE_SUBPEL_SHIFTS || ys != SCALE_SUBPEL_SHIFTS; | |
| } | |
| static INLINE void revert_scale_extra_bits(SubpelParams *sp) { | |
| sp->subpel_x >>= SCALE_EXTRA_BITS; | |
| sp->subpel_y >>= SCALE_EXTRA_BITS; | |
| sp->xs >>= SCALE_EXTRA_BITS; | |
| sp->ys >>= SCALE_EXTRA_BITS; | |
| assert(sp->subpel_x < SUBPEL_SHIFTS); | |
| assert(sp->subpel_y < SUBPEL_SHIFTS); | |
| assert(sp->xs <= SUBPEL_SHIFTS); | |
| assert(sp->ys <= SUBPEL_SHIFTS); | |
| } | |
| static INLINE void highbd_inter_predictor( | |
| const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, | |
| const SubpelParams *subpel_params, int w, int h, | |
| ConvolveParams *conv_params, const InterpFilterParams *interp_filters[2], | |
| int bd) { | |
| assert(conv_params->do_average == 0 || conv_params->do_average == 1); | |
| const int is_scaled = has_scale(subpel_params->xs, subpel_params->ys); | |
| if (is_scaled) { | |
| av1_highbd_convolve_2d_facade(src, src_stride, dst, dst_stride, w, h, | |
| interp_filters, subpel_params->subpel_x, | |
| subpel_params->xs, subpel_params->subpel_y, | |
| subpel_params->ys, 1, conv_params, bd); | |
| } else { | |
| SubpelParams sp = *subpel_params; | |
| revert_scale_extra_bits(&sp); | |
| av1_highbd_convolve_2d_facade(src, src_stride, dst, dst_stride, w, h, | |
| interp_filters, sp.subpel_x, sp.xs, | |
| sp.subpel_y, sp.ys, 0, conv_params, bd); | |
| } | |
| } | |
| void av1_modify_neighbor_predictor_for_obmc(MB_MODE_INFO *mbmi); | |
| int av1_skip_u4x4_pred_in_obmc(BLOCK_SIZE bsize, | |
| const struct macroblockd_plane *pd, int dir); | |
| static INLINE int is_interinter_compound_used(COMPOUND_TYPE type, | |
| BLOCK_SIZE sb_type) { | |
| const int comp_allowed = is_comp_ref_allowed(sb_type); | |
| switch (type) { | |
| case COMPOUND_AVERAGE: | |
| case COMPOUND_DIFFWTD: return comp_allowed; | |
| case COMPOUND_WEDGE: | |
| return comp_allowed && av1_wedge_params_lookup[sb_type].wedge_types > 0; | |
| default: assert(0); return 0; | |
| } | |
| } | |
| static INLINE int is_any_masked_compound_used(BLOCK_SIZE sb_type) { | |
| COMPOUND_TYPE comp_type; | |
| int i; | |
| if (!is_comp_ref_allowed(sb_type)) return 0; | |
| for (i = 0; i < COMPOUND_TYPES; i++) { | |
| comp_type = (COMPOUND_TYPE)i; | |
| if (is_masked_compound_type(comp_type) && | |
| is_interinter_compound_used(comp_type, sb_type)) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static INLINE int get_wedge_types_lookup(BLOCK_SIZE sb_type) { | |
| return av1_wedge_params_lookup[sb_type].wedge_types; | |
| } | |
| static INLINE int av1_is_wedge_used(BLOCK_SIZE sb_type) { | |
| return av1_wedge_params_lookup[sb_type].wedge_types > 0; | |
| } | |
| void av1_make_inter_predictor(const uint16_t *src, int src_stride, | |
| uint16_t *dst, int dst_stride, | |
| InterPredParams *inter_pred_params, | |
| const SubpelParams *subpel_params); | |
| typedef void (*CalcSubpelParamsFunc)(const MV *const src_mv, | |
| InterPredParams *const inter_pred_params, | |
| MACROBLOCKD *xd, int mi_x, int mi_y, | |
| int ref, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| uint16_t **mc_buf, uint16_t **pre, | |
| SubpelParams *subpel_params, | |
| int *src_stride); | |
| void av1_build_one_inter_predictor( | |
| uint16_t *dst, int dst_stride, const MV *const src_mv, | |
| InterPredParams *inter_pred_params, MACROBLOCKD *xd, int mi_x, int mi_y, | |
| int ref, uint16_t **mc_buf, CalcSubpelParamsFunc calc_subpel_params_func); | |
| void av1_build_inter_predictors(const AV1_COMMON *cm, MACROBLOCKD *xd, | |
| int plane, MB_MODE_INFO *mi, | |
| #if CONFIG_BAWP | |
| const BUFFER_SET *dst_orig, | |
| #endif | |
| #if CONFIG_REFINEMV | |
| int build_for_refine_mv_only, | |
| #endif // CONFIG_REFINEMV | |
| int build_for_obmc, int bw, int bh, int mi_x, | |
| int mi_y, uint16_t **mc_buf, | |
| CalcSubpelParamsFunc calc_subpel_params_func); | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| // Precision of refined MV returned, 0 being integer pel. For now, only 1/8 or | |
| // 1/16-pel can be used. | |
| #define MV_REFINE_PREC_BITS 4 // (1/16-pel) | |
| // Apply regularized least squares (RLS). The RLS parameter is bw * bh * 2^(b-4) | |
| // where b = OPFL_RLS_PARAM. | |
| #define OPFL_REGULARIZED_LS 1 | |
| #define OPFL_RLS_PARAM 16 | |
| // Number of bits allowed for covariance matrix elements (su2, sv2, suv, suw | |
| // and svw) so that det, det_x, and det_y does not cause overflow issue in | |
| // int64_t. Its value must be <= (64 - mv_prec_bits - grad_prec_bits) / 2. | |
| #define OPFL_COV_CLAMP_BITS 28 | |
| #define OPFL_COV_CLAMP_VAL (1 << OPFL_COV_CLAMP_BITS) | |
| void av1_opfl_build_inter_predictor( | |
| const AV1_COMMON *cm, MACROBLOCKD *xd, int plane, const MB_MODE_INFO *mi, | |
| int bw, int bh, int mi_x, int mi_y, uint16_t **mc_buf, | |
| InterPredParams *inter_pred_params, | |
| CalcSubpelParamsFunc calc_subpel_params_func, int ref, uint16_t *pred_dst | |
| #if CONFIG_REFINEMV | |
| , | |
| const MV *const src_mv, int pu_width, int pu_height | |
| #endif // CONFIG_REFINEMV | |
| ); | |
| // Generate refined MVs using optflow refinement | |
| void av1_get_optflow_based_mv_highbd( | |
| const AV1_COMMON *cm, MACROBLOCKD *xd, int plane, const MB_MODE_INFO *mbmi, | |
| int_mv *mv_refined, int bw, int bh, int mi_x, int mi_y, uint16_t **mc_buf, | |
| CalcSubpelParamsFunc calc_subpel_params_func, int16_t *gx0, int16_t *gy0, | |
| int16_t *gx1, int16_t *gy1, | |
| #if CONFIG_AFFINE_REFINEMENT | |
| WarpedMotionParams *wms, int *use_affine_opfl, | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| int *vx0, int *vy0, int *vx1, int *vy1, uint16_t *dst0, uint16_t *dst1 | |
| #if CONFIG_OPTFLOW_ON_TIP | |
| , | |
| int do_pred, int use_4x4 | |
| #endif // CONFIG_OPTFLOW_ON_TIP | |
| #if CONFIG_REFINEMV | |
| , | |
| MV *best_mv_ref, int pu_width, int pu_height | |
| #endif // CONFIG_REFINEMV | |
| ); | |
| // With the refined MVs, generate the inter prediction for the block. | |
| void av1_opfl_rebuild_inter_predictor( | |
| uint16_t *dst, int dst_stride, int plane, int_mv *const mv_refined, | |
| InterPredParams *inter_pred_params, MACROBLOCKD *xd, int mi_x, int mi_y, | |
| #if CONFIG_AFFINE_REFINEMENT | |
| CompoundRefineType comp_refine_type, WarpedMotionParams *wms, int_mv *mv, | |
| const int use_affine_opfl, | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| int ref, uint16_t **mc_buf, CalcSubpelParamsFunc calc_subpel_params_func | |
| #if CONFIG_OPTFLOW_ON_TIP | |
| , | |
| int use_4x4 | |
| #endif // CONFIG_OPTFLOW_ON_TIP | |
| ); | |
| // Integer division based on lookup table. | |
| // num: numerator | |
| // den: denominator | |
| // out: output result (num / den) | |
| static INLINE int32_t divide_and_round_signed(int64_t num, int64_t den) { | |
| if (llabs(den) == 1) return (int32_t)(den < 0 ? -num : num); | |
| const int optflow_prec_bits = 16; | |
| int16_t shift; | |
| const int sign_den = (den < 0 ? -1 : 1); | |
| uint16_t inverse_den = resolve_divisor_64(llabs(den), &shift); | |
| shift -= optflow_prec_bits; | |
| if (shift < 0) { | |
| inverse_den <<= (-shift); | |
| shift = 0; | |
| } | |
| int32_t out; | |
| // Make sure 1) the bits for right shift is < 63 and 2) the bit depth | |
| // of num is < 48 to avoid overflow in num * inverse_den | |
| if (optflow_prec_bits + shift >= 63 || | |
| ROUND_POWER_OF_TWO_SIGNED_64(num, 63 - optflow_prec_bits) != 0) { | |
| int64_t out_tmp = ROUND_POWER_OF_TWO_SIGNED_64(num, optflow_prec_bits); | |
| out = (int32_t)ROUND_POWER_OF_TWO_SIGNED_64( | |
| out_tmp * (int64_t)inverse_den * sign_den, shift); | |
| } else { | |
| out = (int32_t)ROUND_POWER_OF_TWO_SIGNED_64( | |
| num * (int64_t)inverse_den * sign_den, optflow_prec_bits + shift); | |
| } | |
| #ifndef NDEBUG | |
| // Verify that the result is consistent with built-in division. | |
| // Quick overflow check | |
| int32_t out_div = (llabs(num) + llabs(den) < 0) | |
| ? (int32_t)DIVIDE_AND_ROUND_SIGNED( | |
| ROUND_POWER_OF_TWO_SIGNED_64(num, 2), | |
| ROUND_POWER_OF_TWO_SIGNED_64(den, 2)) | |
| : (int32_t)DIVIDE_AND_ROUND_SIGNED(num, den); | |
| // check if error is at most 1 at usable values of out_div | |
| if (abs(out_div - out) > 1 && abs(out_div) <= 64) { | |
| printf("Warning: num = %" PRId64 ", den = %" PRId64 | |
| ", inverse_den = %d, shift = %d, v0 = %d, v = %d\n", | |
| num, den, inverse_den, shift, out_div, out); | |
| } | |
| #endif // NDEBUG | |
| return out; | |
| } | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| #if CONFIG_AFFINE_REFINEMENT | |
| void av1_avg_pooling_pdiff_gradients_c(int16_t *pdiff, const int pstride, | |
| int16_t *gx, int16_t *gy, | |
| const int gstride, const int bw, | |
| const int bh, const int n); | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| #if CONFIG_AFFINE_REFINEMENT | |
| #define AFFINE_OPFL_BASED_ON_SAD 1 | |
| #define AFFINE_FAST_ENC_SEARCH 1 | |
| // Method to refine chroma in DAMR | |
| // 0: no chroma refinement at all | |
| // 1: affine compound prediction using DAMR warp MVs | |
| // 2: translational compound prediction using DAMR warp MVs, whole block based | |
| // 3: translational compound prediction using DAMR warp MVs, subblock based | |
| #define AFFINE_CHROMA_REFINE_METHOD 1 | |
| // Fast intermediate warp prediction | |
| // 0: normal per 8x8 warp prediction | |
| // 1: per 4x4 translational warp (requires CONFIG_EXT_WARP_FILTER) | |
| // 2: per pixel bicubic interpolated warp prediction | |
| // 3: per pixel bilinear interpolated warp prediction | |
| #define AFFINE_FAST_WARP_METHOD 3 | |
| // Apply averaging of gradient array for nxn subblock of 128x128 block | |
| // 0: (disable) use all pixels | |
| // 1: 128->64 | |
| // 2: {128, 64}->32 | |
| // 3: {128, 64, 32}->16 | |
| // 4: {128, 64, 32, 16}->8 | |
| #define AFFINE_AVERAGING_BITS 3 | |
| // Number of bits allowed for covariance matrix elements so that determinants | |
| // do not overflow int64_t. For dim=3, input bit depth must be | |
| // <= (64 - mv_prec_bits - grad_prec_bits) / 3. For dim=4, input bit depth must | |
| // be <= (64-1)/2 for the first stage (getsub_4d), and <= 64-3-precbits for | |
| // the second stage (determinant and divide_and_round_signed). | |
| #define AFFINE_CLAMP_VAL (1 << 15) | |
| #define AFFINE_COV_CLAMP_VAL (1 << 30) | |
| // Internal bit depths for affine parameter derivation | |
| #define AFFINE_GRAD_BITS_THR 32 | |
| #define AFFINE_COORDS_OFFSET_BITS 3 | |
| #define AFFINE_PREC_BITS 12 | |
| #define AFFINE_PARAMS_MAX (1 << (AFFINE_PREC_BITS + 3)) | |
| #define AFFINE_RLS_PARAM 2 | |
| #if AFFINE_FAST_WARP_METHOD == 3 | |
| #define BILINEAR_WARP_PREC_BITS 12 | |
| #endif | |
| static INLINE int is_translational_refinement_allowed(const AV1_COMMON *cm, | |
| const int mode) { | |
| assert(cm->seq_params.enable_opfl_refine); | |
| if (mode < NEAR_NEARMV_OPTFLOW) return 0; | |
| if (!cm->seq_params.enable_affine_refine) return 1; | |
| return 0; | |
| } | |
| static INLINE int is_affine_refinement_allowed(const AV1_COMMON *cm, | |
| const MACROBLOCKD *xd, | |
| const int mode) { | |
| if (!cm->seq_params.enable_affine_refine) return 0; | |
| if (mode < NEAR_NEARMV_OPTFLOW) return 0; | |
| const MB_MODE_INFO *mbmi = xd->mi[0]; | |
| if (mbmi->skip_mode && COMP_REFINE_TYPE_FOR_SKIP < COMP_AFFINE_REFINE_START) | |
| return 0; | |
| return 1; | |
| } | |
| // Return 1 if the second step (subblock based translational refinement) is | |
| // applied. | |
| static INLINE int damr_refine_subblock(int plane, const int bw, const int bh, | |
| CompoundRefineType comp_refine_type, | |
| const int n) { | |
| if (n > bw || n > bh) return 0; | |
| if (plane == 0 && n == bw && n == bh) return 0; | |
| #if !CONFIG_EXT_WARP_FILTER | |
| if (n < 8 || bw < 8 || bh < 8) return 0; | |
| #endif // !CONFIG_EXT_WARP_FILTER | |
| #if AFFINE_CHROMA_REFINE_METHOD == 2 | |
| if (plane) return 0; | |
| #endif | |
| if (comp_refine_type < COMP_AFFINE_REFINE_START) return 0; | |
| return comp_refine_type == COMP_REFINE_ROTZOOM4P_SUBBLK2P || | |
| comp_refine_type == COMP_REFINE_ROTZOOM2P_SUBBLK2P; | |
| } | |
| static INLINE int get_allowed_comp_refine_type_mask(const AV1_COMMON *cm, | |
| const MACROBLOCKD *xd, | |
| const MB_MODE_INFO *mbmi) { | |
| if (cm->features.opfl_refine_type == REFINE_ALL && | |
| opfl_allowed_for_cur_block(cm, mbmi)) | |
| return 1 << COMP_REFINE_TYPE_FOR_REFINE_ALL; | |
| if (mbmi->mode < NEAR_NEARMV_OPTFLOW) return 1 << COMP_REFINE_NONE; | |
| int mask = 0; | |
| if (is_translational_refinement_allowed(cm, mbmi->mode)) | |
| mask |= (1 << COMP_REFINE_SUBBLK2P); | |
| if (is_affine_refinement_allowed(cm, xd, mbmi->mode)) { | |
| for (CompoundRefineType r = COMP_AFFINE_REFINE_START; r < COMP_REFINE_TYPES; | |
| r++) | |
| mask |= (1 << r); | |
| } | |
| // Some kind of refinement must be applied in OPTFLOW modes | |
| assert(mask != 0); | |
| return mask; | |
| } | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| #if CONFIG_REFINEMV | |
| // Generate one prediction signal for a TIP block | |
| void tip_build_one_inter_predictor( | |
| uint16_t *dst, int dst_stride, const MV *const src_mv, | |
| InterPredParams *inter_pred_params, MACROBLOCKD *xd, int mi_x, int mi_y, | |
| int ref, uint16_t **mc_buf, CalcSubpelParamsFunc calc_subpel_params_func); | |
| // Compute the SAD between the two predictors when refinemv is ON | |
| int get_refinemv_sad(uint16_t *src1, uint16_t *src2, int width, int height, | |
| int bd); | |
| // Genrate two prediction signals and compute SAD of a given mv0 and mv1 | |
| int av1_refinemv_build_predictors_and_get_sad( | |
| MACROBLOCKD *xd, int bw, int bh, int mi_x, int mi_y, uint16_t **mc_buf, | |
| CalcSubpelParamsFunc calc_subpel_params_func, uint16_t *dst_ref0, | |
| uint16_t *dst_ref1, MV mv0, MV mv1, InterPredParams *inter_pred_params); | |
| // Get the context index to code refinemv flag | |
| int av1_get_refinemv_context(const AV1_COMMON *cm, const MACROBLOCKD *xd, | |
| BLOCK_SIZE bsize); | |
| // Full blocks refine MVs are stored in 4x4 grid so that the MVs can be reused | |
| // for chroma | |
| void fill_subblock_refine_mv(REFINEMV_SUBMB_INFO *refinemv_subinfo, int bw, | |
| int bh, MV mv0, MV mv1); | |
| // Generate the reference area ( bounding box) based on the signaled MV | |
| void av1_get_reference_area_with_padding(const AV1_COMMON *cm, MACROBLOCKD *xd, | |
| int plane, MB_MODE_INFO *mi, int bw, | |
| int bh, int mi_x, int mi_y, | |
| ReferenceArea ref_area[2], | |
| const int comp_pixel_x, | |
| const int comp_pixel_y); | |
| // Derive the sub-pixel related parameters of TIP blocks | |
| // Sub-pel related parameters are stored in the structures pointed by | |
| // "subpel_params" and "block" | |
| void tip_dec_calc_subpel_params(const MV *const src_mv, | |
| InterPredParams *const inter_pred_params, | |
| int mi_x, int mi_y, uint16_t **pre, | |
| SubpelParams *subpel_params, int *src_stride, | |
| PadBlock *block, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| MV32 *scaled_mv, int *subpel_x_mv, | |
| int *subpel_y_mv); | |
| // Derive the sub-pixel related parameters of non-TIP blocks | |
| // Sub-pel related parameters are stored in the structures pointed by | |
| // "subpel_params" and "block" | |
| void dec_calc_subpel_params(const MV *const src_mv, | |
| InterPredParams *const inter_pred_params, | |
| const MACROBLOCKD *const xd, int mi_x, int mi_y, | |
| uint16_t **pre, SubpelParams *subpel_params, | |
| int *src_stride, PadBlock *block, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| MV32 *scaled_mv, int *subpel_x_mv, | |
| int *subpel_y_mv); | |
| // check if the refinemv mode is allwed for a given blocksize | |
| static INLINE int is_refinemv_allowed_bsize(BLOCK_SIZE bsize) { | |
| assert(bsize < BLOCK_SIZES_ALL); | |
| return (block_size_wide[bsize] >= 16 || block_size_high[bsize] >= 16); | |
| } | |
| // check if the refinemv mode is allwed for a given mode and precision | |
| static INLINE int is_refinemv_allowed_mode_precision( | |
| PREDICTION_MODE mode, MvSubpelPrecision precision, | |
| const AV1_COMMON *const cm) { | |
| (void)precision; | |
| if (mode == GLOBAL_GLOBALMV) return 0; | |
| #if CONFIG_AFFINE_REFINEMENT | |
| // Refine MV is allow in JOINT_NEWMV and disallowed in *_OPTFLOW modes | |
| if (cm->features.opfl_refine_type == REFINE_SWITCHABLE && | |
| cm->seq_params.enable_affine_refine) { | |
| if (mode == JOINT_NEWMV) return 1; | |
| } | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| if (cm->features.opfl_refine_type == REFINE_SWITCHABLE && | |
| (mode == JOINT_NEWMV || mode == JOINT_AMVDNEWMV || mode == NEAR_NEWMV || | |
| mode == NEW_NEARMV || mode == NEW_NEWMV)) | |
| return 0; | |
| #if CONFIG_AFFINE_REFINEMENT | |
| if (cm->seq_params.enable_affine_refine) return mode == NEAR_NEARMV; | |
| #endif | |
| return (mode >= NEAR_NEARMV && mode <= JOINT_AMVDNEWMV_OPTFLOW); | |
| } | |
| // check if the prediction mode infered to refimemv to always 1. | |
| #if CONFIG_AFFINE_REFINEMENT | |
| static INLINE int default_refinemv_modes(const AV1_COMMON *cm, | |
| const MB_MODE_INFO *mbmi) { | |
| #else | |
| static INLINE int default_refinemv_modes(const MB_MODE_INFO *mbmi) { | |
| #endif | |
| #if CONFIG_AFFINE_REFINEMENT | |
| if (cm->seq_params.enable_affine_refine) | |
| return (mbmi->skip_mode || mbmi->mode == NEAR_NEARMV || | |
| mbmi->mode == JOINT_NEWMV); | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| return (mbmi->skip_mode || mbmi->mode == NEAR_NEARMV || | |
| mbmi->mode == NEAR_NEARMV_OPTFLOW || | |
| mbmi->mode == JOINT_NEWMV_OPTFLOW); | |
| } | |
| // Check if the compound and equal distance references | |
| static INLINE int is_refinemv_allowed_reference(const AV1_COMMON *cm, | |
| const MB_MODE_INFO *mbmi) { | |
| if (!cm->seq_params.enable_refinemv) return 0; | |
| #if CONFIG_EXPLICIT_TEMPORAL_DIST_CALC | |
| const unsigned int cur_index = cm->cur_frame->display_order_hint; | |
| #else | |
| const unsigned int cur_index = cm->cur_frame->order_hint; | |
| #endif // CONFIG_EXPLICIT_TEMPORAL_DIST_CALC | |
| int d0, d1; | |
| int is_tip = (mbmi->ref_frame[0] == TIP_FRAME); | |
| if (is_tip) { | |
| d0 = cm->tip_ref.ref_offset[0]; | |
| d1 = cm->tip_ref.ref_offset[1]; | |
| } else { | |
| if (!has_second_ref(mbmi)) return 0; | |
| const RefCntBuffer *const ref0 = get_ref_frame_buf(cm, mbmi->ref_frame[0]); | |
| const RefCntBuffer *const ref1 = get_ref_frame_buf(cm, mbmi->ref_frame[1]); | |
| #if CONFIG_EXPLICIT_TEMPORAL_DIST_CALC | |
| d0 = get_relative_dist(&cm->seq_params.order_hint_info, cur_index, | |
| ref0->display_order_hint); | |
| d1 = get_relative_dist(&cm->seq_params.order_hint_info, cur_index, | |
| ref1->display_order_hint); | |
| #else | |
| d0 = (int)cur_index - (int)ref0->order_hint; | |
| d1 = (int)cur_index - (int)ref1->order_hint; | |
| #endif // CONFIG_EXPLICIT_TEMPORAL_DIST_CALC | |
| } | |
| // reference frame has to be both sides to apply dmvr | |
| if (!((d0 <= 0) ^ (d1 <= 0))) return 0; | |
| // Current implementation only supports when both has the same distance | |
| if (abs(d0) != abs(d1)) return 0; | |
| return 1; | |
| } | |
| // check if the refinemv mode is allowed for a given block | |
| static INLINE int is_refinemv_allowed(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi, | |
| BLOCK_SIZE bsize) { | |
| if (!cm->seq_params.enable_refinemv || | |
| cm->superres_scale_denominator != SCALE_NUMERATOR) | |
| return 0; | |
| int is_tip = is_tip_ref_frame(mbmi->ref_frame[0]); | |
| if (is_tip) return 0; | |
| assert(!mbmi->skip_mode); | |
| int is_compound = has_second_ref(mbmi); | |
| return is_compound && is_refinemv_allowed_bsize(bsize) && | |
| is_refinemv_allowed_mode_precision(mbmi->mode, mbmi->pb_mv_precision, | |
| cm) && | |
| is_refinemv_allowed_reference(cm, mbmi); | |
| } | |
| // check if the refinemv mode is allowed for a given block for TIP mode | |
| static INLINE int is_refinemv_allowed_tip_blocks(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| assert(is_tip_ref_frame(mbmi->ref_frame[0])); | |
| return cm->seq_params.enable_refinemv && | |
| cm->superres_scale_denominator == SCALE_NUMERATOR && | |
| is_refinemv_allowed_reference(cm, mbmi); | |
| } | |
| // check if the refinemv mode is allowed for a given block for skip mode | |
| static INLINE int is_refinemv_allowed_skip_mode(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| assert(mbmi->skip_mode); | |
| #if CONFIG_D072_SKIP_MODE_IMPROVE | |
| if (mbmi->ref_frame[1] == NONE_FRAME) return 0; | |
| #endif // CONFIG_D072_SKIP_MODE_IMPROVE | |
| return cm->seq_params.enable_refinemv && | |
| cm->superres_scale_denominator == SCALE_NUMERATOR && | |
| is_refinemv_allowed_bsize(mbmi->sb_type[PLANE_TYPE_Y]) && | |
| is_refinemv_allowed_reference(cm, mbmi); | |
| } | |
| static INLINE int get_default_refinemv_flag(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| if (!cm->seq_params.enable_refinemv || | |
| cm->superres_scale_denominator != SCALE_NUMERATOR) | |
| return 0; | |
| int is_refinemv = | |
| (mbmi->skip_mode | |
| ? is_refinemv_allowed_skip_mode(cm, mbmi) | |
| : is_refinemv_allowed(cm, mbmi, mbmi->sb_type[PLANE_TYPE_Y])); | |
| if (is_refinemv) { | |
| #if CONFIG_AFFINE_REFINEMENT | |
| if (default_refinemv_modes(cm, mbmi)) return 1; | |
| #else | |
| if (default_refinemv_modes(mbmi)) return 1; | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| } | |
| return 0; | |
| } | |
| // check if the refinemv mode is switchable for a given block | |
| static INLINE int switchable_refinemv_flag(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| if (!cm->seq_params.enable_refinemv) return 0; | |
| int is_refinemv = | |
| (mbmi->skip_mode | |
| ? is_refinemv_allowed_skip_mode(cm, mbmi) | |
| : is_refinemv_allowed(cm, mbmi, mbmi->sb_type[PLANE_TYPE_Y])); | |
| if (is_refinemv && !is_tip_ref_frame(mbmi->ref_frame[0])) { | |
| #if CONFIG_AFFINE_REFINEMENT | |
| if (default_refinemv_modes(cm, mbmi)) return 0; | |
| #else | |
| if (default_refinemv_modes(mbmi)) return 0; | |
| #endif // CONFIG_AFFINE_REFINEMENT | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| // Clamp MV to UMV border based on its distance to left/right/top/bottom edge | |
| static AOM_INLINE MV tip_clamp_mv_to_umv_border_sb( | |
| InterPredParams *const inter_pred_params, const MV *src_mv, int bw, int bh, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| int ss_x, int ss_y) { | |
| // If the MV points so far into the UMV border that no visible pixels | |
| // are used for reconstruction, the subpel part of the MV can be | |
| // discarded and the MV limited to 16 pixels with equivalent results. | |
| const int spel_left = (AOM_INTERP_EXTEND + bw) << SUBPEL_BITS; | |
| const int spel_right = spel_left - SUBPEL_SHIFTS; | |
| const int spel_top = (AOM_INTERP_EXTEND + bh) << SUBPEL_BITS; | |
| const int spel_bottom = spel_top - SUBPEL_SHIFTS; | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| MV clamped_mv; | |
| if (use_optflow_refinement) { | |
| // optflow refinement always returns MVs with 1/16 precision so it is not | |
| // necessary to shift the MV before clamping | |
| // Here it should be: | |
| // clamped_mv.row = (int16_t)ROUND_POWER_OF_TWO_SIGNED( | |
| // src_mv->row * (1 << SUBPEL_BITS), MV_REFINE_PREC_BITS + ss_y); | |
| // But currently SUBPEL_BITS == MV_REFINE_PREC_BITS | |
| assert(SUBPEL_BITS == MV_REFINE_PREC_BITS); | |
| if (ss_y || ss_x) { | |
| clamped_mv.row = (int16_t)ROUND_POWER_OF_TWO_SIGNED( | |
| src_mv->row * (1 << SUBPEL_BITS), MV_REFINE_PREC_BITS + ss_y); | |
| clamped_mv.col = (int16_t)ROUND_POWER_OF_TWO_SIGNED( | |
| src_mv->col * (1 << SUBPEL_BITS), MV_REFINE_PREC_BITS + ss_x); | |
| } else { | |
| clamped_mv = *src_mv; | |
| } | |
| } else { | |
| clamped_mv.row = (int16_t)(src_mv->row * (1 << (1 - ss_y))); | |
| clamped_mv.col = (int16_t)(src_mv->col * (1 << (1 - ss_x))); | |
| } | |
| #else | |
| MV clamped_mv = { (int16_t)(src_mv->row * (1 << (1 - ss_y))), | |
| (int16_t)(src_mv->col * (1 << (1 - ss_x))) }; | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| assert(ss_x <= 1); | |
| assert(ss_y <= 1); | |
| const SubpelMvLimits mv_limits = { | |
| inter_pred_params->dist_to_left_edge * (1 << (1 - ss_x)) - spel_left, | |
| inter_pred_params->dist_to_right_edge * (1 << (1 - ss_x)) + spel_right, | |
| inter_pred_params->dist_to_top_edge * (1 << (1 - ss_y)) - spel_top, | |
| inter_pred_params->dist_to_bottom_edge * (1 << (1 - ss_y)) + spel_bottom | |
| }; | |
| clamp_mv(&clamped_mv, &mv_limits); | |
| return clamped_mv; | |
| } | |
| // This function conduct the SAD search between two predictors and find the best | |
| // MVs | |
| void apply_mv_refinement(const AV1_COMMON *cm, MACROBLOCKD *xd, int plane, | |
| MB_MODE_INFO *mi, int bw, int bh, int mi_x, int mi_y, | |
| uint16_t **mc_buf, | |
| CalcSubpelParamsFunc calc_subpel_params_func, | |
| int pre_x, int pre_y, uint16_t *dst_ref0, | |
| uint16_t *dst_ref1, MV *best_mv_ref, int pu_width, | |
| int pu_height); | |
| // check if padding is required during motion compensation | |
| // return 1 means reference pixel is outside of the reference range and padding | |
| // is required return 0 means no padding. | |
| int update_extend_mc_border_params(const struct scale_factors *const sf, | |
| struct buf_2d *const pre_buf, MV32 scaled_mv, | |
| PadBlock *block, int subpel_x_mv, | |
| int subpel_y_mv, int do_warp, int is_intrabc, | |
| int *x_pad, int *y_pad, | |
| const ReferenceArea *ref_area); | |
| // Derive the sub-pixel related parameters of refinemv non-TIP blocks | |
| // Sub-pel related parameters are stored in the structures pointed by | |
| // "subpel_params" Also do padding if required This function is used for both | |
| // encoder and decoder | |
| void common_calc_subpel_params_and_extend( | |
| const MV *const src_mv, InterPredParams *const inter_pred_params, | |
| MACROBLOCKD *const xd, int mi_x, int mi_y, int ref, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| uint16_t **mc_buf, uint16_t **pre, SubpelParams *subpel_params, | |
| int *src_stride); | |
| // Derive the sub-pixel related parameters of refinemv TIP blocks | |
| // Sub-pel related parameters are stored in the structures pointed by | |
| // "subpel_params" Also do padding if required This function is used for both | |
| // encoder and decoder | |
| void tip_common_calc_subpel_params_and_extend( | |
| const MV *const src_mv, InterPredParams *const inter_pred_params, | |
| MACROBLOCKD *const xd, int mi_x, int mi_y, int ref, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| uint16_t **mc_buf, uint16_t **pre, SubpelParams *subpel_params, | |
| int *src_stride); | |
| #endif // CONFIG_REFINEMV | |
| #if CONFIG_REFINEMV || CONFIG_OPTFLOW_ON_TIP | |
| unsigned int get_highbd_sad(const uint16_t *src_ptr, int source_stride, | |
| const uint16_t *ref_ptr, int ref_stride, int bd, | |
| int bw, int bh); | |
| #endif // CONFIG_REFINEMV || CONFIG_OPTFLOW_ON_TIP | |
| #if CONFIG_OPTFLOW_REFINEMENT || CONFIG_OPFL_MV_SEARCH | |
| void av1_opfl_mv_refinement_highbd(const uint16_t *p0, int pstride0, | |
| const uint16_t *p1, int pstride1, | |
| const int16_t *gx0, const int16_t *gy0, | |
| const int16_t *gx1, const int16_t *gy1, | |
| int gstride, int bw, int bh, int d0, int d1, | |
| int grad_prec_bits, int mv_prec_bits, | |
| int *vx0, int *vy0, int *vx1, int *vy1); | |
| void av1_opfl_mv_refinement_interp_grad(const int16_t *pdiff, int pstride0, | |
| const int16_t *gx, const int16_t *gy, | |
| int gstride, int bw, int bh, int d0, | |
| int d1, int grad_prec_bits, | |
| int mv_prec_bits, int *vx0, int *vy0, | |
| int *vx1, int *vy1); | |
| void av1_compute_subpel_gradients_mc_highbd( | |
| MACROBLOCKD *xd, const MB_MODE_INFO *mi, int bw, int bh, int mi_x, int mi_y, | |
| uint16_t **mc_buf, InterPredParams *inter_pred_params, | |
| CalcSubpelParamsFunc calc_subpel_params_func, int ref, int *grad_prec_bits, | |
| int16_t *x_grad, int16_t *y_grad); | |
| void av1_compute_subpel_gradients_interp(int16_t *pred_dst, int bw, int bh, | |
| int *grad_prec_bits, int16_t *x_grad, | |
| int16_t *y_grad); | |
| #endif // CONFIG_OPTFLOW_REFINEMENT || CONFIG_OPFL_MV_SEARCH | |
| // TODO(jkoleszar): yet another mv clamping function :-( | |
| static INLINE MV clamp_mv_to_umv_border_sb(const MACROBLOCKD *xd, | |
| const MV *src_mv, int bw, int bh, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| int use_optflow_refinement, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| int ss_x, int ss_y) { | |
| // If the MV points so far into the UMV border that no visible pixels | |
| // are used for reconstruction, the subpel part of the MV can be | |
| // discarded and the MV limited to 16 pixels with equivalent results. | |
| const int spel_left = (AOM_INTERP_EXTEND + bw) << SUBPEL_BITS; | |
| const int spel_right = spel_left - SUBPEL_SHIFTS; | |
| const int spel_top = (AOM_INTERP_EXTEND + bh) << SUBPEL_BITS; | |
| const int spel_bottom = spel_top - SUBPEL_SHIFTS; | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| MV clamped_mv; | |
| if (use_optflow_refinement) { | |
| // optflow refinement always returns MVs with 1/16 precision so it is not | |
| // necessary to shift the MV before clamping | |
| clamped_mv.row = (int16_t)ROUND_POWER_OF_TWO_SIGNED( | |
| src_mv->row * (1 << SUBPEL_BITS), MV_REFINE_PREC_BITS + ss_y); | |
| clamped_mv.col = (int16_t)ROUND_POWER_OF_TWO_SIGNED( | |
| src_mv->col * (1 << SUBPEL_BITS), MV_REFINE_PREC_BITS + ss_x); | |
| } else { | |
| clamped_mv.row = (int16_t)(src_mv->row * (1 << (1 - ss_y))); | |
| clamped_mv.col = (int16_t)(src_mv->col * (1 << (1 - ss_x))); | |
| } | |
| #else | |
| MV clamped_mv = { (int16_t)(src_mv->row * (1 << (1 - ss_y))), | |
| (int16_t)(src_mv->col * (1 << (1 - ss_x))) }; | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| assert(ss_x <= 1); | |
| assert(ss_y <= 1); | |
| const SubpelMvLimits mv_limits = { | |
| xd->mb_to_left_edge * (1 << (1 - ss_x)) - spel_left, | |
| xd->mb_to_right_edge * (1 << (1 - ss_x)) + spel_right, | |
| xd->mb_to_top_edge * (1 << (1 - ss_y)) - spel_top, | |
| xd->mb_to_bottom_edge * (1 << (1 - ss_y)) + spel_bottom | |
| }; | |
| clamp_mv(&clamped_mv, &mv_limits); | |
| return clamped_mv; | |
| } | |
| #if CONFIG_D071_IMP_MSK_BLD | |
| void make_masked_inter_predictor(const uint16_t *pre, int pre_stride, | |
| uint16_t *dst, int dst_stride, | |
| InterPredParams *inter_pred_params, | |
| const SubpelParams *subpel_params, | |
| int use_bacp, int sub_block_id); | |
| static INLINE int use_border_aware_compound(const AV1_COMMON *cm, | |
| const MB_MODE_INFO *mbmi) { | |
| if (is_masked_compound_type(mbmi->interinter_comp.type) || | |
| mbmi->mode == GLOBAL_GLOBALMV) | |
| return 0; | |
| (void)cm; | |
| return has_second_ref(mbmi) && | |
| (mbmi->mode >= COMP_INTER_MODE_START && | |
| mbmi->mode < COMP_INTER_MODE_END) && | |
| (mbmi->interinter_comp.type == COMPOUND_DIFFWTD || | |
| mbmi->interinter_comp.type == COMPOUND_AVERAGE); | |
| } | |
| int is_out_of_frame_block(InterPredParams const *inter_pred_params, | |
| int frame_width, int frame_height, int sub_block_id); | |
| #endif // CONFIG_D071_IMP_MSK_BLD | |
| static INLINE int64_t scaled_buffer_offset(int x_offset, int y_offset, | |
| int stride, | |
| const struct scale_factors *sf) { | |
| const int x = | |
| sf ? sf->scale_value_x(x_offset, sf) >> SCALE_EXTRA_BITS : x_offset; | |
| const int y = | |
| sf ? sf->scale_value_y(y_offset, sf) >> SCALE_EXTRA_BITS : y_offset; | |
| return (int64_t)y * stride + x; | |
| } | |
| static INLINE void setup_pred_plane(struct buf_2d *dst, uint16_t *src, | |
| int width, int height, int stride, | |
| int mi_row, int mi_col, | |
| const struct scale_factors *scale, | |
| int subsampling_x, int subsampling_y, | |
| const CHROMA_REF_INFO *chroma_ref_info) { | |
| // Offset the buffer pointer | |
| if (chroma_ref_info && (subsampling_x || subsampling_y)) { | |
| mi_row = chroma_ref_info->mi_row_chroma_base; | |
| mi_col = chroma_ref_info->mi_col_chroma_base; | |
| } | |
| const int x = (MI_SIZE * mi_col) >> subsampling_x; | |
| const int y = (MI_SIZE * mi_row) >> subsampling_y; | |
| dst->buf = src + scaled_buffer_offset(x, y, stride, scale); | |
| dst->buf0 = src; | |
| dst->width = width; | |
| dst->height = height; | |
| dst->stride = stride; | |
| } | |
| void av1_setup_dst_planes(struct macroblockd_plane *planes, | |
| const YV12_BUFFER_CONFIG *src, int mi_row, int mi_col, | |
| const int plane_start, const int plane_end, | |
| const CHROMA_REF_INFO *chroma_ref_info); | |
| void av1_setup_pre_planes(MACROBLOCKD *xd, int idx, | |
| const YV12_BUFFER_CONFIG *src, int mi_row, int mi_col, | |
| const struct scale_factors *sf, const int num_planes, | |
| const CHROMA_REF_INFO *chroma_ref_info); | |
| static INLINE void set_default_interp_filters( | |
| MB_MODE_INFO *const mbmi, | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| const AV1_COMMON *cm, | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| InterpFilter frame_interp_filter) { | |
| #if CONFIG_SKIP_MODE_ENHANCEMENT | |
| if (mbmi->skip_mode) { | |
| mbmi->interp_fltr = MULTITAP_SHARP; | |
| return; | |
| } | |
| #endif // CONFIG_SKIP_MODE_ENHANCEMENT | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| mbmi->interp_fltr = (opfl_allowed_for_cur_block(cm, mbmi) | |
| #if CONFIG_REFINEMV | |
| || mbmi->refinemv_flag | |
| #endif // CONFIG_REFINEMV | |
| ) | |
| ? MULTITAP_SHARP | |
| : av1_unswitchable_filter(frame_interp_filter); | |
| #else | |
| mbmi->interp_fltr = av1_unswitchable_filter(frame_interp_filter); | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| } | |
| static INLINE int av1_is_interp_needed(const AV1_COMMON *const cm, | |
| const MACROBLOCKD *const xd) { | |
| (void)cm; | |
| const MB_MODE_INFO *const mbmi = xd->mi[0]; | |
| if (mbmi->skip_mode) return 0; | |
| #if CONFIG_EXTENDED_WARP_PREDICTION | |
| if (mbmi->mode == WARPMV) return 0; | |
| #endif // CONFIG_EXTENDED_WARP_PREDICTION | |
| #if CONFIG_OPTFLOW_REFINEMENT | |
| // No interpolation filter search when optical flow MV refinement is used. | |
| if (opfl_allowed_for_cur_block(cm, mbmi)) return 0; | |
| #endif // CONFIG_OPTFLOW_REFINEMENT | |
| #if CONFIG_REFINEMV | |
| // No interpolation filter search when MV refinement is used. | |
| if (mbmi->refinemv_flag) return 0; | |
| #endif // CONFIG_REFINEMV | |
| if (is_warp_mode(mbmi->motion_mode)) return 0; | |
| if (is_nontrans_global_motion(xd, xd->mi[0])) return 0; | |
| return 1; | |
| } | |
| // Sets up buffers 'dst_buf1' and 'dst_buf2' from relevant buffers in 'xd' for | |
| // subsequent use in OBMC prediction. | |
| void av1_setup_obmc_dst_bufs(MACROBLOCKD *xd, uint16_t **dst_buf1, | |
| uint16_t **dst_buf2); | |
| void av1_setup_build_prediction_by_above_pred( | |
| MACROBLOCKD *xd, int rel_mi_col, uint8_t above_mi_width, | |
| MB_MODE_INFO *above_mbmi, struct build_prediction_ctxt *ctxt, | |
| const int num_planes); | |
| void av1_setup_build_prediction_by_left_pred(MACROBLOCKD *xd, int rel_mi_row, | |
| uint8_t left_mi_height, | |
| MB_MODE_INFO *left_mbmi, | |
| struct build_prediction_ctxt *ctxt, | |
| const int num_planes); | |
| void av1_build_obmc_inter_prediction(const AV1_COMMON *cm, MACROBLOCKD *xd, | |
| uint16_t *above[MAX_MB_PLANE], | |
| int above_stride[MAX_MB_PLANE], | |
| uint16_t *left[MAX_MB_PLANE], | |
| int left_stride[MAX_MB_PLANE]); | |
| const uint8_t *av1_get_obmc_mask(int length); | |
| void av1_count_overlappable_neighbors(const AV1_COMMON *cm, MACROBLOCKD *xd); | |
| #define MASK_MASTER_SIZE ((MAX_WEDGE_SIZE) << 1) | |
| #define MASK_MASTER_STRIDE (MASK_MASTER_SIZE) | |
| void av1_init_wedge_masks(); | |
| static INLINE const uint8_t *av1_get_contiguous_soft_mask(int8_t wedge_index, | |
| int8_t wedge_sign, | |
| BLOCK_SIZE sb_type) { | |
| return av1_wedge_params_lookup[sb_type].masks[wedge_sign][wedge_index]; | |
| } | |
| const uint8_t *av1_get_compound_type_mask( | |
| const INTERINTER_COMPOUND_DATA *const comp_data, BLOCK_SIZE sb_type); | |
| // Init the masks for compound weighted prediction | |
| void init_cwp_masks(); | |
| // Get the mask for compound weighted prediction | |
| const int8_t *av1_get_cwp_mask(int list_idx, int idx); | |
| // build interintra_predictors for one plane | |
| void av1_build_interintra_predictor(const AV1_COMMON *cm, MACROBLOCKD *xd, | |
| uint16_t *pred, int stride, | |
| const BUFFER_SET *ctx, int plane, | |
| BLOCK_SIZE bsize); | |
| #if CONFIG_EXT_RECUR_PARTITIONS | |
| void av1_build_intra_predictors_for_interintra(const AV1_COMMON *cm, | |
| MACROBLOCKD *xd, int plane, | |
| const BUFFER_SET *ctx, | |
| uint16_t *dst, int dst_stride); | |
| #else | |
| void av1_build_intra_predictors_for_interintra(const AV1_COMMON *cm, | |
| MACROBLOCKD *xd, | |
| BLOCK_SIZE bsize, int plane, | |
| const BUFFER_SET *ctx, | |
| uint16_t *dst, int dst_stride); | |
| #endif // CONFIG_EXT_RECUR_PARTITIONS | |
| void av1_combine_interintra(MACROBLOCKD *xd, BLOCK_SIZE bsize, int plane, | |
| const uint16_t *inter_pred, int inter_stride, | |
| const uint16_t *intra_pred, int intra_stride); | |
| int av1_allow_warp(const MB_MODE_INFO *const mbmi, | |
| const WarpTypesAllowed *const warp_types, | |
| const WarpedMotionParams *const gm_params, | |
| #if CONFIG_EXTENDED_WARP_PREDICTION || CONFIG_AFFINE_REFINEMENT | |
| int ref, | |
| #endif // CONFIG_EXTENDED_WARP_PREDICTION || CONFIG_AFFINE_REFINEMENT | |
| int build_for_obmc, const struct scale_factors *const sf, | |
| WarpedMotionParams *final_warp_params); | |
| // derive the context of the mpp_flag | |
| int av1_get_mpp_flag_context(const AV1_COMMON *cm, const MACROBLOCKD *xd); | |
| // derive the context of the precision signaling | |
| int av1_get_pb_mv_precision_down_context(const AV1_COMMON *cm, | |
| const MACROBLOCKD *xd); | |
| // derive the context of the mv class | |
| int av1_get_mv_class_context(const MvSubpelPrecision pb_mv_precision); | |
| // set the precision of a block to the precision | |
| void set_mv_precision(MB_MODE_INFO *mbmi, MvSubpelPrecision precision); | |
| #if BUGFIX_AMVD_AMVR | |
| void set_amvd_mv_precision(MB_MODE_INFO *mbmi, MvSubpelPrecision precision); | |
| #endif // BUGFIX_AMVD_AMVR | |
| // set the most probable mv precision of the block | |
| // Currently, the most probable MV precision is same as the maximum precision of | |
| // the block. | |
| void set_most_probable_mv_precision(const AV1_COMMON *const cm, | |
| MB_MODE_INFO *mbmi, const BLOCK_SIZE bsize); | |
| // Set the default value fo the precision set. Currently the value is always 0. | |
| void set_default_precision_set(const AV1_COMMON *const cm, MB_MODE_INFO *mbmi, | |
| const BLOCK_SIZE bsize); | |
| // Set the precision set of the block. Currently, the value is 0. | |
| void set_precision_set(const AV1_COMMON *const cm, MACROBLOCKD *const xd, | |
| MB_MODE_INFO *mbmi, const BLOCK_SIZE bsize, | |
| #if CONFIG_SEP_COMP_DRL | |
| int *ref_mv_idx); | |
| #else | |
| uint8_t ref_mv_idx); | |
| #endif // CONFIG_SEP_COMP_DRL | |
| // Get the index of the precision | |
| // this index is signalled when precision is not same as the most probable | |
| // precision | |
| int av1_get_pb_mv_precision_index(const MB_MODE_INFO *mbmi); | |
| // get the actual precision value from the signalled index | |
| MvSubpelPrecision av1_get_precision_from_index(MB_MODE_INFO *mbmi, | |
| int precision_idx_coded_value); | |
| // Set the maximum precision to the default value | |
| void set_default_max_mv_precision(MB_MODE_INFO *mbmi, | |
| MvSubpelPrecision precision); | |
| // get the maximum allowed precision value of the block | |
| MvSubpelPrecision av1_get_mbmi_max_mv_precision(const AV1_COMMON *const cm, | |
| const SB_INFO *sbi, | |
| const MB_MODE_INFO *mbmi); | |
| // check if pb_mv_precision is allowed or not | |
| int is_pb_mv_precision_active(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi, const BLOCK_SIZE bsize); | |
| #if CONFIG_EXTENDED_WARP_PREDICTION | |
| // check if the WARPMV mode is allwed for a given blocksize | |
| static INLINE int is_warpmv_allowed_bsize(BLOCK_SIZE bsize) { | |
| assert(bsize < BLOCK_SIZES_ALL); | |
| return AOMMIN(block_size_wide[bsize], block_size_high[bsize]) >= 8; | |
| } | |
| // check if WARPMV mode is allowed | |
| static INLINE int is_warpmv_mode_allowed(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi, | |
| BLOCK_SIZE bsize) { | |
| int frame_warp_delta_allowed = | |
| (cm->features.enabled_motion_modes & (1 << WARP_DELTA)) != 0; | |
| if (has_second_ref(mbmi) || !frame_warp_delta_allowed || | |
| is_tip_ref_frame(mbmi->ref_frame[0]) || !cm->features.allow_warpmv_mode) | |
| return 0; | |
| return frame_warp_delta_allowed && is_warpmv_allowed_bsize(bsize); | |
| } | |
| // check if warpmv with mvd is allowed or not | |
| static INLINE int allow_warpmv_with_mvd_coding(const AV1_COMMON *const cm, | |
| const MB_MODE_INFO *mbmi) { | |
| if (!cm->features.allow_warpmv_mode) return 0; | |
| return (mbmi->mode == WARPMV && mbmi->warp_ref_idx < 2); | |
| } | |
| #endif // CONFIG_EXTENDED_WARP_PREDICTION | |
| #ifdef __cplusplus | |
| } // extern "C" | |
| #endif | |
| #endif // AOM_AV1_COMMON_RECONINTER_H_ |