| /* | |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 3-Clause Clear License | |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear | |
| * License was not distributed with this source code in the LICENSE file, you | |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the | |
| * Alliance for Open Media Patent License 1.0 was not distributed with this | |
| * source code in the PATENTS file, you can obtain it at | |
| * aomedia.org/license/patent-license/. | |
| */ | |
| #include <stdint.h> | |
| #include "config/aom_config.h" | |
| #include "config/aom_scale_rtcd.h" | |
| #include "aom/aom_codec.h" | |
| #include "aom/aom_encoder.h" | |
| #include "aom_ports/system_state.h" | |
| #if CONFIG_MISMATCH_DEBUG | |
| #include "aom_util/debug_util.h" | |
| #endif // CONFIG_MISMATCH_DEBUG | |
| #include "av1/common/av1_common_int.h" | |
| #include "av1/common/reconinter.h" | |
| #include "av1/encoder/encoder.h" | |
| #include "av1/encoder/encode_strategy.h" | |
| #include "av1/encoder/encodeframe.h" | |
| #include "av1/encoder/firstpass.h" | |
| #include "av1/encoder/pass2_strategy.h" | |
| #include "av1/encoder/temporal_filter.h" | |
| #include "av1/encoder/tpl_model.h" | |
| #include "av1/encoder/encoder_utils.h" | |
| #if CONFIG_TUNE_VMAF | |
| #include "av1/encoder/tune_vmaf.h" | |
| #endif | |
| #define TEMPORAL_FILTER_KEY_FRAME 1 | |
| // Get the subgop config corresponding to the current frame within the | |
| // gf group | |
| const SubGOPStepCfg *get_subgop_step(const GF_GROUP *const gf_group, | |
| int index) { | |
| const SubGOPCfg *subgop_cfg = gf_group->subgop_cfg; | |
| if (subgop_cfg == NULL) return NULL; | |
| const int is_first_gop = (gf_group->update_type[0] == KF_UPDATE); | |
| const int offset = | |
| gf_group->has_overlay_for_key_frame ? 2 : (is_first_gop ? 1 : 0); | |
| return &subgop_cfg->step[index - offset]; | |
| } | |
| void av1_get_ref_frames_enc(AV1_COMMON *cm, int cur_frame_disp, | |
| RefFrameMapPair *ref_frame_map_pairs) { | |
| assert(cm->seq_params.explicit_ref_frame_map); | |
| // With explicit_ref_frame_map on, an encoder-only ranking scheme can be | |
| // implemented here. For now, av1_get_ref_frames is used as a placeholder. | |
| av1_get_ref_frames(cm, cur_frame_disp, ref_frame_map_pairs); | |
| } | |
| void av1_configure_buffer_updates(AV1_COMP *const cpi, | |
| const FRAME_UPDATE_TYPE type) { | |
| // NOTE(weitinglin): Should we define another function to take care of | |
| // cpi->rc.is_$Source_Type to make this function as it is in the comment? | |
| cpi->rc.is_src_frame_alt_ref = 0; | |
| switch (type) { | |
| case OVERLAY_UPDATE: | |
| case KFFLT_OVERLAY_UPDATE: | |
| case INTNL_OVERLAY_UPDATE: cpi->rc.is_src_frame_alt_ref = 1; break; | |
| case KF_UPDATE: | |
| case LF_UPDATE: | |
| case GF_UPDATE: | |
| case ARF_UPDATE: | |
| case KFFLT_UPDATE: | |
| case INTNL_ARF_UPDATE: break; | |
| default: assert(0); break; | |
| } | |
| } | |
| static void set_additional_frame_flags(const AV1_COMMON *const cm, | |
| unsigned int *const frame_flags) { | |
| if (frame_is_intra_only(cm)) { | |
| *frame_flags |= FRAMEFLAGS_INTRAONLY; | |
| } | |
| if (frame_is_sframe(cm)) { | |
| *frame_flags |= FRAMEFLAGS_SWITCH; | |
| } | |
| if (cm->features.error_resilient_mode) { | |
| *frame_flags |= FRAMEFLAGS_ERROR_RESILIENT; | |
| } | |
| if (cm->film_grain_params.apply_grain) { | |
| *frame_flags |= FRAMEFLAGS_HAS_FILM_GRAIN_PARAMS; | |
| } | |
| } | |
| static INLINE void update_keyframe_counters(AV1_COMP *cpi) { | |
| if (cpi->common.show_frame) { | |
| cpi->rc.frames_since_key++; | |
| cpi->rc.frames_to_key--; | |
| } | |
| } | |
| static INLINE int is_frame_droppable( | |
| const ExtRefreshFrameFlagsInfo *const ext_refresh_frame_flags) { | |
| // Droppable frame is only used by external refresh flags. VoD setting won't | |
| // trigger its use case. | |
| if (ext_refresh_frame_flags->update_pending) | |
| return ext_refresh_frame_flags->all_ref_frames == 0; | |
| else | |
| return 0; | |
| } | |
| static INLINE void update_frames_till_gf_update(AV1_COMP *cpi) { | |
| // TODO(weitinglin): Updating this counter for is_frame_droppable | |
| // is a work-around to handle the condition when a frame is drop. | |
| // We should fix the cpi->common.show_frame flag | |
| // instead of checking the other condition to update the counter properly. | |
| if (cpi->common.show_frame || | |
| is_frame_droppable(&cpi->ext_flags.refresh_frame)) { | |
| // Decrement count down till next gf | |
| if (cpi->rc.frames_till_gf_update_due > 0) | |
| cpi->rc.frames_till_gf_update_due--; | |
| } | |
| } | |
| static INLINE void update_gf_group_index(AV1_COMP *cpi) { | |
| // Increment the gf group index ready for the next frame. If this is | |
| // a show_existing_frame with a source other than altref, or if it is not | |
| // a displayed forward keyframe, the index was incremented when it was | |
| // originally encoded. | |
| if (!cpi->common.show_existing_frame || cpi->rc.is_src_frame_alt_ref || | |
| cpi->common.current_frame.frame_type == KEY_FRAME) { | |
| ++cpi->gf_group.index; | |
| } | |
| } | |
| // Update show_existing_frame flag for frames of type OVERLAY_UPDATE in the | |
| // current GF interval | |
| static INLINE void set_show_existing_alt_ref(GF_GROUP *const gf_group, | |
| int apply_filtering, | |
| int enable_overlay, | |
| int show_existing_alt_ref) { | |
| if (get_frame_update_type(gf_group) != ARF_UPDATE && | |
| get_frame_update_type(gf_group) != KFFLT_UPDATE) | |
| return; | |
| if (!enable_overlay) | |
| gf_group->show_existing_alt_ref = 1; | |
| else | |
| gf_group->show_existing_alt_ref = | |
| apply_filtering ? show_existing_alt_ref : 1; | |
| } | |
| static void update_rc_counts(AV1_COMP *cpi) { | |
| update_keyframe_counters(cpi); | |
| update_frames_till_gf_update(cpi); | |
| update_gf_group_index(cpi); | |
| } | |
| static void set_ext_overrides(AV1_COMMON *const cm, | |
| EncodeFrameParams *const frame_params, | |
| ExternalFlags *const ext_flags) { | |
| // Overrides the defaults with the externally supplied values with | |
| // av1_update_reference() and av1_update_entropy() calls | |
| // Note: The overrides are valid only for the next frame passed | |
| // to av1_encode_lowlevel() | |
| if (ext_flags->use_s_frame) { | |
| frame_params->frame_type = S_FRAME; | |
| } | |
| if (ext_flags->refresh_frame_context_pending) { | |
| cm->features.refresh_frame_context = ext_flags->refresh_frame_context; | |
| ext_flags->refresh_frame_context_pending = 0; | |
| } | |
| cm->features.allow_ref_frame_mvs = ext_flags->use_ref_frame_mvs; | |
| frame_params->error_resilient_mode = ext_flags->use_error_resilient; | |
| // A keyframe is already error resilient and keyframes with | |
| // error_resilient_mode interferes with the use of show_existing_frame | |
| // when forward reference keyframes are enabled. | |
| frame_params->error_resilient_mode &= frame_params->frame_type != KEY_FRAME; | |
| // For bitstream conformance, s-frames must be error-resilient | |
| frame_params->error_resilient_mode |= frame_params->frame_type == S_FRAME; | |
| } | |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT | |
| static int get_current_frame_ref_type( | |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params) { | |
| // We choose the reference "type" of this frame from the flags which indicate | |
| // which reference frames will be refreshed by it. More than one of these | |
| // flags may be set, so the order here implies an order of precedence. This is | |
| // just used to choose the primary_ref_frame (as the most recent reference | |
| // buffer of the same reference-type as the current frame) | |
| (void)frame_params; | |
| // TODO(jingning): This table should be a lot simpler with the new | |
| // ARF system in place. Keep frame_params for the time being as we are | |
| // still evaluating a few design options. | |
| switch (cpi->gf_group.layer_depth[cpi->gf_group.index]) { | |
| case 0: return 0; | |
| case 1: return 1; | |
| case MAX_ARF_LAYERS: | |
| case MAX_ARF_LAYERS + 1: return 4; | |
| default: return 7; | |
| } | |
| } | |
| static int choose_primary_ref_frame( | |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params) { | |
| const AV1_COMMON *const cm = &cpi->common; | |
| const int intra_only = frame_params->frame_type == KEY_FRAME || | |
| frame_params->frame_type == INTRA_ONLY_FRAME; | |
| if (intra_only || frame_params->error_resilient_mode || | |
| cpi->ext_flags.use_primary_ref_none) { | |
| return PRIMARY_REF_NONE; | |
| } | |
| // In large scale case, always use Last frame's frame contexts. | |
| // Note(yunqing): In other cases, primary_ref_frame is chosen based on | |
| // cpi->gf_group.layer_depth[cpi->gf_group.index], which also controls | |
| // frame bit allocation. | |
| if (cm->tiles.large_scale) return 0; | |
| // Find the most recent reference frame with the same reference type as the | |
| // current frame | |
| const int current_ref_type = get_current_frame_ref_type(cpi, frame_params); | |
| int wanted_fb = cpi->fb_of_context_type[current_ref_type]; | |
| int primary_ref_frame = PRIMARY_REF_NONE; | |
| const int n_refs = cm->ref_frames_info.num_total_refs; | |
| for (int ref_frame = 0; ref_frame < n_refs; ref_frame++) { | |
| if (get_ref_frame_map_idx(cm, ref_frame) == wanted_fb) { | |
| primary_ref_frame = ref_frame; | |
| } | |
| } | |
| return primary_ref_frame; | |
| } | |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT | |
| // Map the subgop cfg reference list to actual reference buffers. Disable | |
| // any reference frames that are not listed in the sub gop. | |
| static void get_gop_cfg_enabled_refs(AV1_COMP *const cpi, int *ref_frame_flags, | |
| int order_offset) { | |
| GF_GROUP gf_group = cpi->gf_group; | |
| // The current display index stored has not yet been updated. We must add | |
| // The order offset to get the correct value here. | |
| const int cur_frame_disp = | |
| cpi->common.current_frame.frame_number + order_offset; | |
| const SubGOPStepCfg *step_gop_cfg = | |
| get_subgop_step(&gf_group, gf_group.index); | |
| assert(step_gop_cfg != NULL); | |
| // No references specified | |
| if (step_gop_cfg->num_references < 0) return; | |
| // Mask to indicate whether or not each ref is allowed by the GOP config | |
| int ref_frame_used[INTER_REFS_PER_FRAME] = { 0 }; | |
| // Structures to hash each reference frame based on its pyramid level. This | |
| // will allow us to match the pyramid levels specified in the cfg to the best | |
| // reference frame index. | |
| int n_references[MAX_ARF_LAYERS + 1] = { 0 }; | |
| int references[MAX_ARF_LAYERS + 1][INTER_REFS_PER_FRAME] = { { 0 } }; | |
| int disp_orders[MAX_ARF_LAYERS + 1][INTER_REFS_PER_FRAME] = { { 0 } }; | |
| int frame_level = -1; | |
| // Loop over each reference frame and hash it based on its pyramid level | |
| for (int frame = 0; frame < INTER_REFS_PER_FRAME; frame++) { | |
| // Get reference frame buffer | |
| const RefCntBuffer *const buf = get_ref_frame_buf(&cpi->common, frame); | |
| if (buf == NULL) continue; | |
| const int frame_order = (int)buf->display_order_hint; | |
| frame_level = buf->pyramid_level; | |
| // Sometimes a frame index is in multiple reference buffers. | |
| // Do not add a frame to the pyramid list multiple times. | |
| int found = 0; | |
| for (int r = 0; r < n_references[frame_level]; r++) { | |
| if (frame_order == disp_orders[frame_level][r]) { | |
| found = 1; | |
| break; | |
| } | |
| } | |
| // If this is an unseen frame, map its display order and ref buffer | |
| // index to its level in the pyramid | |
| if (!found) { | |
| int n_refs = n_references[frame_level]++; | |
| disp_orders[frame_level][n_refs] = frame_order; | |
| references[frame_level][n_refs] = frame; | |
| } | |
| } | |
| // For each reference specified in the step_gop_cfg, map it to a reference | |
| // buffer based on pyramid level if possible. | |
| for (int i = 0; i < step_gop_cfg->num_references; i++) { | |
| const int level = step_gop_cfg->references[i]; | |
| const int abs_level = abs(level); | |
| int best_frame = -1; | |
| int best_frame_index = -1; | |
| int best_disp_order = INT_MAX; | |
| for (int ref = 0; ref < n_references[abs_level]; ref++) { | |
| const int disp_order = disp_orders[abs_level][ref]; | |
| const int cur_order_diff = cur_frame_disp - disp_order; | |
| // This frame has already been used | |
| if (disp_order < 0) continue; | |
| // This frame is in the wrong direction | |
| if ((cur_order_diff < 0) != (level < 0)) continue; | |
| // Store this frame if it is the closest in display order to the current | |
| // frame so far | |
| if (abs(cur_order_diff) < abs(best_disp_order - cur_frame_disp)) { | |
| best_frame = references[abs_level][ref]; | |
| best_frame_index = ref; | |
| best_disp_order = disp_order; | |
| } | |
| } | |
| update_subgop_ref_stats(&cpi->subgop_stats, | |
| cpi->oxcf.unit_test_cfg.enable_subgop_stats, i, | |
| (best_frame < 0) ? 0 : 1, level, best_disp_order, | |
| (int)step_gop_cfg->num_references); | |
| if (best_frame == -1) { | |
| if (cpi->print_per_frame_stats) { | |
| fprintf(stderr, | |
| "Warning [Subgop cfg]: " | |
| "Level %d ref for frame %d not found\n", | |
| level, step_gop_cfg->disp_frame_idx); | |
| } | |
| } else { | |
| ref_frame_used[best_frame] = 1; | |
| disp_orders[abs_level][best_frame_index] = -1; | |
| } | |
| } | |
| // Avoid using references that were not specified by the cfg | |
| for (int frame = 0; frame < INTER_REFS_PER_FRAME; frame++) | |
| if (!ref_frame_used[frame]) *ref_frame_flags &= ~(1 << (frame)); | |
| } | |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT | |
| static void update_fb_of_context_type( | |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params, | |
| int *const fb_of_context_type) { | |
| const AV1_COMMON *const cm = &cpi->common; | |
| const int current_frame_ref_type = | |
| get_current_frame_ref_type(cpi, frame_params); | |
| const int golden_frame = cm->ref_frames_info.past_refs[0]; | |
| const int altref_frame = get_furthest_future_ref_index(cm); | |
| if (frame_is_intra_only(cm) || cm->features.error_resilient_mode || | |
| cpi->ext_flags.use_primary_ref_none) { | |
| for (int i = 0; i < REF_FRAMES; i++) { | |
| fb_of_context_type[i] = -1; | |
| } | |
| fb_of_context_type[current_frame_ref_type] = | |
| cm->show_frame ? get_ref_frame_map_idx(cm, golden_frame) | |
| : get_ref_frame_map_idx(cm, altref_frame); | |
| } | |
| if (!encode_show_existing_frame(cm)) { | |
| // Refresh fb_of_context_type[]: see encoder.h for explanation | |
| if (cm->current_frame.frame_type == KEY_FRAME) { | |
| // All ref frames are refreshed, pick one that will live long enough | |
| fb_of_context_type[current_frame_ref_type] = 0; | |
| } else { | |
| // If more than one frame is refreshed, it doesn't matter which one we | |
| // pick so pick the first. LST sometimes doesn't refresh any: this is ok | |
| for (int i = 0; i < REF_FRAMES; i++) { | |
| if (cm->current_frame.refresh_frame_flags & (1 << i)) { | |
| fb_of_context_type[current_frame_ref_type] = i; | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT | |
| static void adjust_frame_rate(AV1_COMP *cpi, int64_t ts_start, int64_t ts_end) { | |
| TimeStamps *time_stamps = &cpi->time_stamps; | |
| int64_t this_duration; | |
| int step = 0; | |
| // Clear down mmx registers | |
| aom_clear_system_state(); | |
| if (ts_start == time_stamps->first_ever) { | |
| this_duration = ts_end - ts_start; | |
| step = 1; | |
| } else { | |
| int64_t last_duration = | |
| time_stamps->prev_end_seen - time_stamps->prev_start_seen; | |
| this_duration = ts_end - time_stamps->prev_end_seen; | |
| // do a step update if the duration changes by 10% | |
| if (last_duration) | |
| step = (int)((this_duration - last_duration) * 10 / last_duration); | |
| } | |
| if (this_duration) { | |
| if (step) { | |
| av1_new_framerate(cpi, 10000000.0 / this_duration); | |
| } else { | |
| // Average this frame's rate into the last second's average | |
| // frame rate. If we haven't seen 1 second yet, then average | |
| // over the whole interval seen. | |
| const double interval = | |
| AOMMIN((double)(ts_end - time_stamps->first_ever), 10000000.0); | |
| double avg_duration = 10000000.0 / cpi->framerate; | |
| avg_duration *= (interval - avg_duration + this_duration); | |
| avg_duration /= interval; | |
| av1_new_framerate(cpi, 10000000.0 / avg_duration); | |
| } | |
| } | |
| time_stamps->prev_start_seen = ts_start; | |
| time_stamps->prev_end_seen = ts_end; | |
| } | |
| // Determine whether there is a forced keyframe pending in the lookahead buffer | |
| int get_forced_keyframe_position(struct lookahead_ctx *lookahead, | |
| const int up_to_index, | |
| const COMPRESSOR_STAGE compressor_stage) { | |
| /* If the forced kf is not available or if the current frame is | |
| * forced kf, then return -1. Else return the position of the | |
| * forced kf. | |
| */ | |
| for (int i = 0; i <= up_to_index; i++) { | |
| const struct lookahead_entry *e = | |
| av1_lookahead_peek(lookahead, i, compressor_stage); | |
| if (e == NULL) { | |
| // We have reached the end of the lookahead buffer and not early-returned | |
| // so there isn't a forced key-frame pending. | |
| return -1; | |
| } else if (e->flags == AOM_EFLAG_FORCE_KF) { | |
| return (i > 0) ? i : -1; | |
| } else { | |
| continue; | |
| } | |
| } | |
| return -1; // Never reached | |
| } | |
| // Check if we should encode an ARF or internal ARF. If not, try a LAST | |
| // Do some setup associated with the chosen source | |
| // temporal_filtered, flush, and frame_update_type are outputs. | |
| // Return the frame source, or NULL if we couldn't find one | |
| static struct lookahead_entry *choose_frame_source( | |
| AV1_COMP *const cpi, int *const flush, struct lookahead_entry **last_source, | |
| EncodeFrameParams *const frame_params) { | |
| AV1_COMMON *const cm = &cpi->common; | |
| const GF_GROUP *const gf_group = &cpi->gf_group; | |
| struct lookahead_entry *source = NULL; | |
| // Source index in lookahead buffer. | |
| int src_index = gf_group->arf_src_offset[gf_group->index]; | |
| // TODO(Aasaipriya): Forced key frames need to be fixed when rc_mode != AOM_Q | |
| if (src_index && | |
| (get_forced_keyframe_position(cpi->lookahead, src_index, | |
| cpi->compressor_stage) != -1) && | |
| cpi->oxcf.rc_cfg.mode != AOM_Q) { | |
| src_index = 0; | |
| *flush = 1; | |
| } | |
| // If the current frame is arf, then we should not pop from the lookahead | |
| // buffer. If the current frame is not arf, then pop it. This assumes the | |
| // first frame in the GF group is not arf. May need to change if it is not | |
| // true. | |
| int pop_lookahead = (src_index == 0); | |
| // If this is a key frame and keyframe filtering is enabled with overlay, | |
| // then do not pop. | |
| if (pop_lookahead && cpi->oxcf.kf_cfg.enable_keyframe_filtering > 1 && | |
| cpi->rc.frames_to_key == 0 && cpi->rc.frames_till_gf_update_due == 0 && | |
| !is_stat_generation_stage(cpi) && cpi->lookahead) { | |
| if (cpi->lookahead->read_ctxs[cpi->compressor_stage].sz && | |
| (*flush || | |
| cpi->lookahead->read_ctxs[cpi->compressor_stage].sz == | |
| cpi->lookahead->read_ctxs[cpi->compressor_stage].pop_sz)) { | |
| pop_lookahead = 0; | |
| } | |
| } | |
| frame_params->show_frame = pop_lookahead; | |
| if (pop_lookahead) { | |
| // show frame, pop from buffer | |
| // Get last frame source. | |
| if (cm->current_frame.frame_number > 0) { | |
| *last_source = | |
| av1_lookahead_peek(cpi->lookahead, -1, cpi->compressor_stage); | |
| } | |
| // Read in the source frame. | |
| source = av1_lookahead_pop(cpi->lookahead, *flush, cpi->compressor_stage); | |
| } else { | |
| // no show frames are arf frames | |
| source = | |
| av1_lookahead_peek(cpi->lookahead, src_index, cpi->compressor_stage); | |
| if (source != NULL) { | |
| cm->showable_frame = 1; | |
| } | |
| } | |
| return source; | |
| } | |
| // Don't allow a show_existing_frame to coincide with an error resilient or | |
| // S-Frame. An exception can be made in the case of a keyframe, since it does | |
| // not depend on any previous frames. | |
| static int allow_show_existing(const AV1_COMP *const cpi, | |
| unsigned int frame_flags) { | |
| if (cpi->common.current_frame.frame_number == 0) return 0; | |
| const struct lookahead_entry *lookahead_src = | |
| av1_lookahead_peek(cpi->lookahead, 0, cpi->compressor_stage); | |
| if (lookahead_src == NULL) return 1; | |
| const int is_error_resilient = | |
| cpi->oxcf.tool_cfg.error_resilient_mode || | |
| (lookahead_src->flags & AOM_EFLAG_ERROR_RESILIENT); | |
| const int is_s_frame = cpi->oxcf.kf_cfg.enable_sframe || | |
| (lookahead_src->flags & AOM_EFLAG_SET_S_FRAME); | |
| const int is_key_frame = | |
| (cpi->rc.frames_to_key == 0) || (frame_flags & FRAMEFLAGS_KEY); | |
| return !(is_error_resilient || is_s_frame) || is_key_frame; | |
| } | |
| // Update frame_flags to tell the encoder's caller what sort of frame was | |
| // encoded. | |
| static void update_frame_flags(const AV1_COMMON *const cm, | |
| unsigned int *frame_flags) { | |
| if (encode_show_existing_frame(cm)) { | |
| *frame_flags &= ~FRAMEFLAGS_KEY; | |
| return; | |
| } | |
| if (cm->current_frame.frame_type == KEY_FRAME) { | |
| *frame_flags |= FRAMEFLAGS_KEY; | |
| } else { | |
| *frame_flags &= ~FRAMEFLAGS_KEY; | |
| } | |
| } | |
| #define DUMP_REF_FRAME_IMAGES 0 | |
| #if DUMP_REF_FRAME_IMAGES == 1 | |
| static int dump_one_image(AV1_COMMON *cm, | |
| const YV12_BUFFER_CONFIG *const ref_buf, | |
| char *file_name) { | |
| int h; | |
| FILE *f_ref = NULL; | |
| if (ref_buf == NULL) { | |
| printf("Frame data buffer is NULL.\n"); | |
| return AOM_CODEC_MEM_ERROR; | |
| } | |
| if ((f_ref = fopen(file_name, "wb")) == NULL) { | |
| printf("Unable to open file %s to write.\n", file_name); | |
| return AOM_CODEC_MEM_ERROR; | |
| } | |
| // --- Y --- | |
| for (h = 0; h < cm->height; ++h) { | |
| fwrite(&ref_buf->y_buffer[h * ref_buf->y_stride], 1, cm->width, f_ref); | |
| } | |
| // --- U --- | |
| for (h = 0; h < (cm->height >> 1); ++h) { | |
| fwrite(&ref_buf->u_buffer[h * ref_buf->uv_stride], 1, (cm->width >> 1), | |
| f_ref); | |
| } | |
| // --- V --- | |
| for (h = 0; h < (cm->height >> 1); ++h) { | |
| fwrite(&ref_buf->v_buffer[h * ref_buf->uv_stride], 1, (cm->width >> 1), | |
| f_ref); | |
| } | |
| fclose(f_ref); | |
| return AOM_CODEC_OK; | |
| } | |
| static void dump_ref_frame_images(AV1_COMP *cpi) { | |
| AV1_COMMON *const cm = &cpi->common; | |
| MV_REFERENCE_FRAME ref_frame; | |
| for (ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ++ref_frame) { | |
| char file_name[256] = ""; | |
| snprintf(file_name, sizeof(file_name), "/tmp/enc_F%d_ref_%d.yuv", | |
| cm->current_frame.frame_number, ref_frame); | |
| dump_one_image(cm, get_ref_frame_yv12_buf(cpi, ref_frame), file_name); | |
| } | |
| } | |
| #endif // DUMP_REF_FRAME_IMAGES == 1 | |
| int av1_get_refresh_ref_frame_map(AV1_COMMON *cm, int refresh_frame_flags) { | |
| (void)cm; | |
| int ref_map_index = INVALID_IDX; | |
| for (ref_map_index = 0; ref_map_index < REF_FRAMES; ++ref_map_index) { | |
| if ((refresh_frame_flags >> ref_map_index) & 1) break; | |
| } | |
| return ref_map_index; | |
| } | |
| int use_subgop_cfg(const GF_GROUP *const gf_group, int gf_index) { | |
| if (gf_index < 0) return 0; | |
| if (gf_group->subgop_cfg == NULL) return 0; | |
| if (gf_index == 1) return !gf_group->has_overlay_for_key_frame; | |
| return 1; | |
| } | |
| static int get_free_ref_map_index(RefFrameMapPair ref_map_pairs[REF_FRAMES]) { | |
| for (int idx = 0; idx < REF_FRAMES; ++idx) | |
| if (ref_map_pairs[idx].disp_order == -1) return idx; | |
| return INVALID_IDX; | |
| } | |
| static int get_refresh_idx(int update_arf, int refresh_level, | |
| int cur_frame_disp, | |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]) { | |
| int arf_count = 0; | |
| int oldest_arf_order = INT32_MAX; | |
| int oldest_arf_idx = -1; | |
| int oldest_frame_order = INT32_MAX; | |
| int oldest_idx = -1; | |
| int oldest_ref_level_order = INT32_MAX; | |
| int oldest_ref_level_idx = -1; | |
| for (int map_idx = 0; map_idx < REF_FRAMES; map_idx++) { | |
| RefFrameMapPair ref_pair = ref_frame_map_pairs[map_idx]; | |
| if (ref_pair.disp_order == -1) continue; | |
| const int frame_order = ref_pair.disp_order; | |
| const int reference_frame_level = ref_pair.pyr_level; | |
| // Keep future frames and three closest previous frames in output order | |
| if (frame_order > cur_frame_disp - 3) continue; | |
| // Keep track of the oldest reference frame matching the specified | |
| // refresh level from the subgop cfg | |
| if (refresh_level > 0 && refresh_level == reference_frame_level) { | |
| if (frame_order < oldest_ref_level_order) { | |
| oldest_ref_level_order = frame_order; | |
| oldest_ref_level_idx = map_idx; | |
| } | |
| } | |
| // Keep track of the oldest level 1 frame if the current frame is level also | |
| // 1 | |
| if (reference_frame_level == 1) { | |
| // If there are more than 2 level 1 frames in the reference list, | |
| // discard the oldest | |
| if (frame_order < oldest_arf_order) { | |
| oldest_arf_order = frame_order; | |
| oldest_arf_idx = map_idx; | |
| } | |
| arf_count++; | |
| continue; | |
| } | |
| // Update the overall oldest reference frame | |
| if (frame_order < oldest_frame_order) { | |
| oldest_frame_order = frame_order; | |
| oldest_idx = map_idx; | |
| } | |
| } | |
| if (oldest_ref_level_idx > -1) return oldest_ref_level_idx; | |
| if (update_arf && arf_count > 2) return oldest_arf_idx; | |
| if (oldest_idx >= 0) return oldest_idx; | |
| if (oldest_arf_idx >= 0) return oldest_arf_idx; | |
| assert(0 && "No valid refresh index found"); | |
| return -1; | |
| } | |
| static int get_refresh_frame_flags_subgop_cfg( | |
| const AV1_COMP *const cpi, int gf_index, int cur_disp_order, | |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES], int refresh_mask, | |
| int free_fb_index) { | |
| const SubGOPStepCfg *step_gop_cfg = get_subgop_step(&cpi->gf_group, gf_index); | |
| assert(step_gop_cfg != NULL); | |
| const int pyr_level = step_gop_cfg->pyr_level; | |
| const FRAME_TYPE_CODE type_code = step_gop_cfg->type_code; | |
| const int refresh_level = step_gop_cfg->refresh; | |
| if (refresh_level == 0) return 0; | |
| // No refresh necessary for these frame types | |
| if (type_code == FRAME_TYPE_INO_REPEAT || | |
| type_code == FRAME_TYPE_INO_SHOWEXISTING) | |
| return refresh_mask; | |
| // If there is an open slot, refresh that one instead of replacing a reference | |
| if (free_fb_index != INVALID_IDX) { | |
| refresh_mask = 1 << free_fb_index; | |
| return refresh_mask; | |
| } | |
| const int update_arf = type_code == FRAME_TYPE_OOO_FILTERED && pyr_level == 1; | |
| const int refresh_idx = get_refresh_idx(update_arf, refresh_level, | |
| cur_disp_order, ref_frame_map_pairs); | |
| return 1 << refresh_idx; | |
| } | |
| int av1_get_refresh_frame_flags( | |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params, | |
| FRAME_UPDATE_TYPE frame_update_type, int gf_index, int cur_disp_order, | |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]) { | |
| // Switch frames and shown key-frames overwrite all reference slots | |
| if ((frame_params->frame_type == KEY_FRAME && !cpi->no_show_fwd_kf) || | |
| frame_params->frame_type == S_FRAME) { | |
| return REFRESH_FRAME_ALL; | |
| } | |
| // show_existing_frames don't actually send refresh_frame_flags so set the | |
| // flags to 0 to keep things consistent. | |
| if (frame_params->show_existing_frame && | |
| (!frame_params->error_resilient_mode || | |
| frame_params->frame_type == KEY_FRAME)) { | |
| return 0; | |
| } | |
| int refresh_mask = 0; | |
| const ExtRefreshFrameFlagsInfo *const ext_refresh_frame_flags = | |
| &cpi->ext_flags.refresh_frame; | |
| if (is_frame_droppable(ext_refresh_frame_flags)) return 0; | |
| if (ext_refresh_frame_flags->update_pending) { | |
| return refresh_mask; | |
| } | |
| // Search for the open slot to store the current frame. | |
| int free_fb_index = get_free_ref_map_index(ref_frame_map_pairs); | |
| if (use_subgop_cfg(&cpi->gf_group, gf_index)) { | |
| const int mask = get_refresh_frame_flags_subgop_cfg( | |
| cpi, gf_index, cur_disp_order, ref_frame_map_pairs, refresh_mask, | |
| free_fb_index); | |
| return mask; | |
| } | |
| // No refresh necessary for these frame types | |
| if (frame_update_type == OVERLAY_UPDATE || | |
| frame_update_type == KFFLT_OVERLAY_UPDATE || | |
| frame_update_type == INTNL_OVERLAY_UPDATE) { | |
| return refresh_mask; | |
| } | |
| // If there is an open slot, refresh that one instead of replacing a reference | |
| if (free_fb_index != INVALID_IDX) { | |
| return 1 << free_fb_index; | |
| } | |
| const int update_arf = frame_update_type == ARF_UPDATE; | |
| const int refresh_idx = | |
| get_refresh_idx(update_arf, -1, cur_disp_order, ref_frame_map_pairs); | |
| return 1 << refresh_idx; | |
| } | |
| void setup_mi(AV1_COMP *const cpi, YV12_BUFFER_CONFIG *src) { | |
| AV1_COMMON *const cm = &cpi->common; | |
| const int num_planes = av1_num_planes(cm); | |
| MACROBLOCK *const x = &cpi->td.mb; | |
| MACROBLOCKD *const xd = &x->e_mbd; | |
| av1_setup_src_planes(x, src, 0, 0, num_planes, NULL); | |
| av1_setup_block_planes(xd, cm->seq_params.subsampling_x, | |
| cm->seq_params.subsampling_y, num_planes); | |
| set_mi_offsets(&cm->mi_params, xd, 0, 0 | |
| #if CONFIG_C071_SUBBLK_WARPMV | |
| , | |
| 0, 0 | |
| #endif // CONFIG_C071_SUBBLK_WARPMV | |
| ); | |
| } | |
| // Apply temporal filtering to source frames and encode the filtered frame. | |
| // If the current frame does not require filtering, this function is identical | |
| // to av1_encode() except that tpl is not performed. | |
| static int denoise_and_encode(AV1_COMP *const cpi, uint8_t *const dest, | |
| EncodeFrameInput *const frame_input, | |
| EncodeFrameParams *const frame_params, | |
| EncodeFrameResults *const frame_results) { | |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; | |
| AV1_COMMON *const cm = &cpi->common; | |
| const GF_GROUP *const gf_group = &cpi->gf_group; | |
| // Decide whether to apply temporal filtering to the source frame. | |
| int apply_filtering = 0; | |
| int arf_src_index = -1; | |
| if (frame_params->frame_type == KEY_FRAME) { | |
| // Decide whether it is allowed to perform key frame filtering | |
| int allow_kf_filtering = | |
| oxcf->kf_cfg.enable_keyframe_filtering && | |
| !is_stat_generation_stage(cpi) && !frame_params->show_existing_frame && | |
| cpi->rc.frames_to_key > cpi->oxcf.algo_cfg.arnr_max_frames && | |
| !is_lossless_requested(&oxcf->rc_cfg) && | |
| oxcf->algo_cfg.arnr_max_frames > 0; | |
| if (allow_kf_filtering) { | |
| const double y_noise_level = av1_estimate_noise_from_single_plane( | |
| frame_input->source, 0, cm->seq_params.bit_depth); | |
| apply_filtering = y_noise_level > 0; | |
| } else { | |
| apply_filtering = 0; | |
| } | |
| // If we are doing kf filtering, set up a few things. | |
| if (apply_filtering) { | |
| MACROBLOCKD *const xd = &cpi->td.mb.e_mbd; | |
| av1_init_mi_buffers(&cm->mi_params); | |
| setup_mi(cpi, frame_input->source); | |
| av1_init_macroblockd(cm, xd); | |
| memset(cpi->mbmi_ext_info.frame_base, 0, | |
| cpi->mbmi_ext_info.alloc_size * | |
| sizeof(*cpi->mbmi_ext_info.frame_base)); | |
| av1_set_speed_features_framesize_independent(cpi, oxcf->speed); | |
| av1_set_speed_features_framesize_dependent(cpi, oxcf->speed); | |
| av1_set_rd_speed_thresholds(cpi); | |
| av1_setup_frame_buf_refs(cm); | |
| av1_setup_frame_sign_bias(cm); | |
| av1_frame_init_quantizer(cpi); | |
| av1_setup_past_independence(cm); | |
| if (gf_group->update_type[gf_group->index] == KEY_FRAME && | |
| !cpi->no_show_fwd_kf) | |
| cm->current_frame.frame_number = 0; | |
| if (!frame_params->show_frame && cpi->no_show_fwd_kf) { | |
| // fwd kf | |
| arf_src_index = -1 * gf_group->arf_src_offset[gf_group->index]; | |
| } else if (!frame_params->show_frame) { | |
| arf_src_index = 0; | |
| } else { | |
| arf_src_index = -1; | |
| } | |
| } | |
| } else if (get_frame_update_type(&cpi->gf_group) == ARF_UPDATE || | |
| get_frame_update_type(&cpi->gf_group) == KFFLT_UPDATE || | |
| get_frame_update_type(&cpi->gf_group) == INTNL_ARF_UPDATE) { | |
| // ARF | |
| apply_filtering = oxcf->algo_cfg.arnr_max_frames > 0; | |
| if (gf_group->is_user_specified) { | |
| apply_filtering &= gf_group->is_filtered[gf_group->index]; | |
| } | |
| if (apply_filtering) { | |
| arf_src_index = gf_group->arf_src_offset[gf_group->index]; | |
| } | |
| } | |
| // Save the pointer to the original source image. | |
| YV12_BUFFER_CONFIG *source_buffer = frame_input->source; | |
| // apply filtering to frame | |
| int show_existing_alt_ref = 0; | |
| if (apply_filtering) { | |
| // TODO(bohanli): figure out why we need frame_type in cm here. | |
| cm->current_frame.frame_type = frame_params->frame_type; | |
| const int code_arf = | |
| av1_temporal_filter(cpi, arf_src_index, &show_existing_alt_ref); | |
| if (code_arf) { | |
| aom_extend_frame_borders(&cpi->alt_ref_buffer, av1_num_planes(cm)); | |
| frame_input->source = &cpi->alt_ref_buffer; | |
| aom_copy_metadata_to_frame_buffer(frame_input->source, | |
| source_buffer->metadata); | |
| } | |
| } | |
| #if !CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT_ENHANCEMENT | |
| // when enable_frame_output_order == 1, show_existing mechanism is | |
| // used for alt_ref in encoder side internally, but the OBU with | |
| // show_existing_frame == 1 is not signaled in the bitstream. | |
| if (cm->seq_params.enable_frame_output_order) show_existing_alt_ref = 1; | |
| #endif // !CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT_ENHANCEMENT | |
| set_show_existing_alt_ref(&cpi->gf_group, apply_filtering, | |
| oxcf->algo_cfg.enable_overlay, | |
| show_existing_alt_ref); | |
| // perform tpl after filtering | |
| int allow_tpl = oxcf->gf_cfg.lag_in_frames > 1 && | |
| !is_stat_generation_stage(cpi) && | |
| oxcf->algo_cfg.enable_tpl_model; | |
| if (frame_params->frame_type == KEY_FRAME) { | |
| // Don't do tpl for fwd key frames | |
| allow_tpl = allow_tpl && !cpi->sf.tpl_sf.disable_filtered_key_tpl && | |
| !cpi->no_show_fwd_kf; | |
| } else { | |
| // Do tpl after ARF is filtered, or if no ARF, at the second frame of GF | |
| // group. | |
| // TODO(bohanli): if no ARF, just do it at the first frame. | |
| int gf_index = gf_group->index; | |
| allow_tpl = allow_tpl && (gf_group->update_type[gf_index] == ARF_UPDATE || | |
| gf_group->update_type[gf_index] == GF_UPDATE); | |
| if (allow_tpl) { | |
| // Need to set the size for TPL for ARF | |
| // TODO(bohanli): Why is this? what part of it is necessary? | |
| av1_set_frame_size(cpi, cm->width, cm->height); | |
| } | |
| } | |
| if (gf_group->index == 0) av1_init_tpl_stats(&cpi->tpl_data); | |
| if (allow_tpl) av1_tpl_setup_stats(cpi, 0, frame_params, frame_input); | |
| if (av1_encode(cpi, dest, frame_input, frame_params, frame_results) != | |
| AOM_CODEC_OK) { | |
| return AOM_CODEC_ERROR; | |
| } | |
| // Set frame_input source to true source for psnr calculation. | |
| if (apply_filtering && is_psnr_calc_enabled(cpi)) { | |
| cpi->source = | |
| av1_scale_if_required(cm, source_buffer, &cpi->scaled_source, | |
| cm->features.interp_filter, 0, false, true); | |
| cpi->unscaled_source = source_buffer; | |
| } | |
| return AOM_CODEC_OK; | |
| } | |
| int av1_encode_strategy(AV1_COMP *const cpi, size_t *const size, | |
| uint8_t *const dest, unsigned int *frame_flags, | |
| int64_t *const time_stamp, int64_t *const time_end, | |
| const aom_rational64_t *const timestamp_ratio, | |
| int flush) { | |
| AV1EncoderConfig *const oxcf = &cpi->oxcf; | |
| AV1_COMMON *const cm = &cpi->common; | |
| GF_GROUP *gf_group = &cpi->gf_group; | |
| ExternalFlags *const ext_flags = &cpi->ext_flags; | |
| EncodeFrameInput frame_input; | |
| EncodeFrameParams frame_params; | |
| EncodeFrameResults frame_results; | |
| memset(&frame_input, 0, sizeof(frame_input)); | |
| memset(&frame_params, 0, sizeof(frame_params)); | |
| memset(&frame_results, 0, sizeof(frame_results)); | |
| // Check if we need to stuff more src frames | |
| if (flush == 0) { | |
| int srcbuf_size = | |
| av1_lookahead_depth(cpi->lookahead, cpi->compressor_stage); | |
| int pop_size = av1_lookahead_pop_sz(cpi->lookahead, cpi->compressor_stage); | |
| // Continue buffering look ahead buffer. | |
| if (srcbuf_size < pop_size) return -1; | |
| } | |
| if (!av1_lookahead_peek(cpi->lookahead, 0, cpi->compressor_stage)) { | |
| if (flush && oxcf->pass == 1 && !cpi->twopass.first_pass_done) { | |
| av1_end_first_pass(cpi); /* get last stats packet */ | |
| cpi->twopass.first_pass_done = 1; | |
| } | |
| return -1; | |
| } | |
| if (!is_stat_generation_stage(cpi)) { | |
| // If this is a forward keyframe, mark as a show_existing_frame | |
| // TODO(bohanli): find a consistent condition for fwd keyframes | |
| if (oxcf->kf_cfg.fwd_kf_enabled && | |
| (gf_group->index == (gf_group->size - 1)) && | |
| (gf_group->update_type[gf_group->index] == OVERLAY_UPDATE || | |
| gf_group->update_type[gf_group->index] == KFFLT_OVERLAY_UPDATE) && | |
| gf_group->arf_index >= 0 && cpi->rc.frames_to_key == 0) { | |
| frame_params.show_existing_frame = 1; | |
| } else { | |
| frame_params.show_existing_frame = | |
| (gf_group->show_existing_alt_ref && | |
| (gf_group->update_type[gf_group->index] == OVERLAY_UPDATE || | |
| gf_group->update_type[gf_group->index] == KFFLT_OVERLAY_UPDATE)) || | |
| gf_group->update_type[gf_group->index] == INTNL_OVERLAY_UPDATE; | |
| } | |
| frame_params.show_existing_frame &= allow_show_existing(cpi, *frame_flags); | |
| // Reset show_existing_alt_ref decision to 0 after it is used. | |
| if (gf_group->update_type[gf_group->index] == OVERLAY_UPDATE || | |
| gf_group->update_type[gf_group->index] == KFFLT_OVERLAY_UPDATE) { | |
| gf_group->show_existing_alt_ref = 0; | |
| } | |
| } else { | |
| frame_params.show_existing_frame = 0; | |
| } | |
| if (!is_stat_generation_stage(cpi)) { | |
| av1_get_second_pass_params(cpi, &frame_params); | |
| } | |
| struct lookahead_entry *source = NULL; | |
| struct lookahead_entry *last_source = NULL; | |
| if (frame_params.show_existing_frame) { | |
| source = av1_lookahead_pop(cpi->lookahead, flush, cpi->compressor_stage); | |
| frame_params.show_frame = 1; | |
| } else { | |
| source = choose_frame_source(cpi, &flush, &last_source, &frame_params); | |
| } | |
| if (source == NULL) { // If no source was found, we can't encode a frame. | |
| if (flush && oxcf->pass == 1 && !cpi->twopass.first_pass_done) { | |
| av1_end_first_pass(cpi); /* get last stats packet */ | |
| cpi->twopass.first_pass_done = 1; | |
| } | |
| return -1; | |
| } | |
| // Source may be changed if temporal filtered later. | |
| frame_input.source = &source->img; | |
| frame_input.last_source = last_source != NULL ? &last_source->img : NULL; | |
| frame_input.ts_duration = source->ts_end - source->ts_start; | |
| // Save unfiltered source. It is used in av1_get_second_pass_params(). | |
| cpi->unfiltered_source = frame_input.source; | |
| *time_stamp = source->ts_start; | |
| *time_end = source->ts_end; | |
| if (source->ts_start < cpi->time_stamps.first_ever) { | |
| cpi->time_stamps.first_ever = source->ts_start; | |
| cpi->time_stamps.prev_end_seen = source->ts_start; | |
| } | |
| if (!is_stat_generation_stage(cpi) && | |
| cpi->tpl_data.tpl_stats_pool[0] == NULL) { | |
| setup_tpl_buffers(cm, &cpi->tpl_data, cpi->oxcf.algo_cfg.enable_tpl_model, | |
| oxcf->gf_cfg.lag_in_frames); | |
| } | |
| av1_apply_encoding_flags(cpi, source->flags); | |
| if (!frame_params.show_existing_frame) | |
| *frame_flags = (source->flags & AOM_EFLAG_FORCE_KF) ? FRAMEFLAGS_KEY : 0; | |
| // Shown frames and arf-overlay frames need frame-rate considering | |
| if (frame_params.show_frame) | |
| adjust_frame_rate(cpi, source->ts_start, source->ts_end); | |
| if (!frame_params.show_existing_frame) { | |
| if (cpi->film_grain_table) { | |
| cm->cur_frame->film_grain_params_present = aom_film_grain_table_lookup( | |
| cpi->film_grain_table, *time_stamp, *time_end, 0 /* =erase */, | |
| &cm->film_grain_params); | |
| } else { | |
| cm->cur_frame->film_grain_params_present = | |
| cm->seq_params.film_grain_params_present; | |
| } | |
| // only one operating point supported now | |
| const int64_t pts64 = ticks_to_timebase_units(timestamp_ratio, *time_stamp); | |
| if (pts64 < 0 || pts64 > UINT32_MAX) return AOM_CODEC_ERROR; | |
| cm->frame_presentation_time = (uint32_t)pts64; | |
| } | |
| FRAME_UPDATE_TYPE frame_update_type = get_frame_update_type(gf_group); | |
| if (frame_params.show_existing_frame && | |
| frame_params.frame_type != KEY_FRAME) { | |
| // Force show-existing frames to be INTER, except forward keyframes | |
| frame_params.frame_type = INTER_FRAME; | |
| } | |
| // TODO(david.turner@argondesign.com): Move all the encode strategy | |
| // (largely near av1_get_compressed_data) in here | |
| // TODO(david.turner@argondesign.com): Change all the encode strategy to | |
| // modify frame_params instead of cm or cpi. | |
| // Per-frame encode speed. In theory this can vary, but things may have | |
| // been written assuming speed-level will not change within a sequence, so | |
| // this parameter should be used with caution. | |
| frame_params.speed = oxcf->speed; | |
| // Work out some encoding parameters specific to the pass: | |
| if (has_no_stats_stage(cpi) && oxcf->q_cfg.aq_mode == CYCLIC_REFRESH_AQ) { | |
| av1_cyclic_refresh_update_parameters(cpi); | |
| } else if (is_stat_generation_stage(cpi)) { | |
| cpi->td.mb.e_mbd.lossless[0] = is_lossless_requested(&oxcf->rc_cfg); | |
| const int kf_requested = (cm->current_frame.frame_number == 0 || | |
| (*frame_flags & FRAMEFLAGS_KEY)); | |
| if (kf_requested && frame_update_type != OVERLAY_UPDATE && | |
| frame_update_type != KFFLT_OVERLAY_UPDATE && | |
| frame_update_type != INTNL_OVERLAY_UPDATE) { | |
| frame_params.frame_type = KEY_FRAME; | |
| } else { | |
| frame_params.frame_type = INTER_FRAME; | |
| } | |
| } else if (is_stat_consumption_stage(cpi)) { | |
| #if CONFIG_MISMATCH_DEBUG | |
| mismatch_move_frame_idx_w(!cm->seq_params.enable_frame_output_order || | |
| !frame_params.show_existing_frame); | |
| #endif // CONFIG_MISMATCH_DEBUG | |
| #if TXCOEFF_COST_TIMER | |
| cm->txcoeff_cost_timer = 0; | |
| cm->txcoeff_cost_count = 0; | |
| #endif | |
| } | |
| if (frame_params.frame_type == KEY_FRAME) cm->showable_frame = 0; | |
| #if CONFIG_MISMATCH_DEBUG | |
| if (has_no_stats_stage(cpi)) { | |
| mismatch_move_frame_idx_w(!cm->seq_params.enable_frame_output_order || | |
| !frame_params.show_existing_frame); | |
| } | |
| #endif // CONFIG_MISMATCH_DEBUG | |
| if (!is_stat_generation_stage(cpi)) | |
| set_ext_overrides(cm, &frame_params, ext_flags); | |
| // Shown keyframes and S frames refresh all reference buffers | |
| const int force_refresh_all = | |
| ((frame_params.frame_type == KEY_FRAME && frame_params.show_frame) || | |
| frame_params.frame_type == S_FRAME) && | |
| !frame_params.show_existing_frame; | |
| (void)force_refresh_all; | |
| av1_configure_buffer_updates(cpi, frame_update_type); | |
| const int order_offset = gf_group->arf_src_offset[gf_group->index]; | |
| const int cur_frame_disp = | |
| cpi->common.current_frame.frame_number + order_offset; | |
| #if CONFIG_PRIMARY_REF_FRAME_OPT | |
| init_ref_map_pair(&cpi->common, cm->ref_frame_map_pairs, | |
| gf_group->update_type[gf_group->index] == KF_UPDATE); | |
| #else | |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]; | |
| init_ref_map_pair(&cpi->common, ref_frame_map_pairs, | |
| gf_group->update_type[gf_group->index] == KF_UPDATE); | |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT | |
| if (!is_stat_generation_stage(cpi)) { | |
| cm->current_frame.frame_type = frame_params.frame_type; | |
| cm->features.error_resilient_mode = frame_params.error_resilient_mode; | |
| #if CONFIG_PRIMARY_REF_FRAME_OPT | |
| if (cm->seq_params.explicit_ref_frame_map) | |
| av1_get_ref_frames_enc(cm, cur_frame_disp, cm->ref_frame_map_pairs); | |
| else | |
| av1_get_ref_frames(cm, cur_frame_disp, cm->ref_frame_map_pairs); | |
| #else | |
| if (cm->seq_params.explicit_ref_frame_map) | |
| av1_get_ref_frames_enc(cm, cur_frame_disp, ref_frame_map_pairs); | |
| else | |
| av1_get_ref_frames(cm, cur_frame_disp, ref_frame_map_pairs); | |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT | |
| #if CONFIG_SAME_REF_COMPOUND | |
| cm->ref_frames_info.num_same_ref_compound = | |
| AOMMIN(cm->seq_params.num_same_ref_compound, | |
| cm->ref_frames_info.num_total_refs); | |
| #endif // CONFIG_SAME_REF_COMPOUND | |
| #if CONFIG_IMPROVED_GLOBAL_MOTION | |
| cm->cur_frame->num_ref_frames = cm->ref_frames_info.num_total_refs; | |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION | |
| // ref_frame_flags is defined based on the external flag | |
| // max-reference-frames. | |
| frame_params.ref_frame_flags = | |
| (1 << cpi->common.ref_frames_info.num_total_refs) - 1; | |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT | |
| frame_params.primary_ref_frame = | |
| choose_primary_ref_frame(cpi, &frame_params); | |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT | |
| frame_params.order_offset = gf_group->arf_src_offset[gf_group->index]; | |
| if (!is_stat_generation_stage(cpi) && | |
| use_subgop_cfg(&cpi->gf_group, cpi->gf_group.index) && | |
| frame_update_type != KF_UPDATE) { | |
| get_gop_cfg_enabled_refs(cpi, &frame_params.ref_frame_flags, | |
| frame_params.order_offset); | |
| } | |
| frame_params.refresh_frame_flags = av1_get_refresh_frame_flags( | |
| cpi, &frame_params, frame_update_type, cpi->gf_group.index, | |
| #if CONFIG_PRIMARY_REF_FRAME_OPT | |
| cur_frame_disp, cm->ref_frame_map_pairs); | |
| #else | |
| cur_frame_disp, ref_frame_map_pairs); | |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT | |
| frame_params.existing_fb_idx_to_show = INVALID_IDX; | |
| // Find the frame buffer to show based on display order | |
| if (frame_params.show_existing_frame) { | |
| for (int frame = 0; frame < REF_FRAMES; frame++) { | |
| const RefCntBuffer *const buf = cm->ref_frame_map[frame]; | |
| if (buf == NULL) continue; | |
| const int frame_order = (int)buf->display_order_hint; | |
| if (frame_order == cur_frame_disp) | |
| frame_params.existing_fb_idx_to_show = frame; | |
| } | |
| } | |
| } | |
| // The way frame_params->remapped_ref_idx is setup is a placeholder. | |
| // Currently, reference buffer assignment is done by update_ref_frame_map() | |
| // which is called by high-level strategy AFTER encoding a frame. It | |
| // modifies cm->remapped_ref_idx. If you want to use an alternative method | |
| // to determine reference buffer assignment, just put your assignments into | |
| // frame_params->remapped_ref_idx here and they will be used when encoding | |
| // this frame. If frame_params->remapped_ref_idx is setup independently of | |
| // cm->remapped_ref_idx then update_ref_frame_map() will have no effect. | |
| memcpy(frame_params.remapped_ref_idx, cm->remapped_ref_idx, | |
| REF_FRAMES * sizeof(*cm->remapped_ref_idx)); | |
| cpi->td.mb.delta_qindex = 0; | |
| if (!frame_params.show_existing_frame) { | |
| cm->quant_params.using_qmatrix = oxcf->q_cfg.using_qm; | |
| av1_set_lr_tools(cm->seq_params.lr_tools_disable_mask[0], 0, &cm->features); | |
| av1_set_lr_tools(cm->seq_params.lr_tools_disable_mask[1], 1, &cm->features); | |
| av1_set_lr_tools(cm->seq_params.lr_tools_disable_mask[1], 2, &cm->features); | |
| } | |
| if (denoise_and_encode(cpi, dest, &frame_input, &frame_params, | |
| &frame_results) != AOM_CODEC_OK) { | |
| return AOM_CODEC_ERROR; | |
| } | |
| if (!is_stat_generation_stage(cpi)) { | |
| // First pass doesn't modify reference buffer assignment or produce frame | |
| // flags | |
| update_frame_flags(&cpi->common, frame_flags); | |
| } | |
| if (!is_stat_generation_stage(cpi)) { | |
| #if TXCOEFF_COST_TIMER | |
| cm->cum_txcoeff_cost_timer += cm->txcoeff_cost_timer; | |
| fprintf(stderr, | |
| "\ntxb coeff cost block number: %ld, frame time: %ld, cum time %ld " | |
| "in us\n", | |
| cm->txcoeff_cost_count, cm->txcoeff_cost_timer, | |
| cm->cum_txcoeff_cost_timer); | |
| #endif | |
| if (!has_no_stats_stage(cpi)) av1_twopass_postencode_update(cpi); | |
| } | |
| #if CONFIG_TUNE_VMAF | |
| if (!is_stat_generation_stage(cpi) && | |
| (oxcf->tune_cfg.tuning >= AOM_TUNE_VMAF_WITH_PREPROCESSING && | |
| oxcf->tune_cfg.tuning <= AOM_TUNE_VMAF_NEG_MAX_GAIN)) { | |
| av1_update_vmaf_curve(cpi); | |
| } | |
| #endif | |
| if (!is_stat_generation_stage(cpi)) { | |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT | |
| update_fb_of_context_type(cpi, &frame_params, cpi->fb_of_context_type); | |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT | |
| set_additional_frame_flags(cm, frame_flags); | |
| update_rc_counts(cpi); | |
| } | |
| // Unpack frame_results: | |
| *size = frame_results.size; | |
| // Leave a signal for a higher level caller about if this frame is droppable | |
| if (*size > 0) { | |
| cpi->droppable = is_frame_droppable(&ext_flags->refresh_frame); | |
| } | |
| return AOM_CODEC_OK; | |
| } | |
| // Determine whether a frame is a keyframe arf. Will return 0 for fwd kf arf. | |
| // Note it depends on frame_since_key and gf_group, therefore should be called | |
| // after the gf group is defined, or otherwise a keyframe arf may still return | |
| // 0. | |
| int av1_check_keyframe_arf(int gf_index, GF_GROUP *gf_group, | |
| int frame_since_key) { | |
| if (gf_index >= gf_group->size) return 0; | |
| (void)frame_since_key; | |
| return gf_group->update_type[gf_index] == KFFLT_UPDATE; | |
| /* | |
| return gf_group->update_type[gf_index] == ARF_UPDATE && | |
| gf_group->update_type[gf_index + 1] == OVERLAY_UPDATE && | |
| frame_since_key == 0; | |
| */ | |
| } | |
| // Determine whether a frame is a keyframe overlay (will also return 0 for fwd | |
| // kf overlays). | |
| int av1_check_keyframe_overlay(int gf_index, GF_GROUP *gf_group, | |
| int frame_since_key) { | |
| if (gf_index < 1) return 0; | |
| (void)frame_since_key; | |
| return gf_group->update_type[gf_index] == KFFLT_OVERLAY_UPDATE; | |
| /* | |
| return gf_group->update_type[gf_index - 1] == ARF_UPDATE && | |
| gf_group->update_type[gf_index] == OVERLAY_UPDATE && | |
| frame_since_key == 0; | |
| */ | |
| } |