Google Git Google Git
Sign in
aomedia/avm/79add8a4c09ca33bcfe564e7f612766e4367dc6a/./av1/common/mvref_common.h
blob: 831869a1daeacdb290b50941cf31315c1bface83 [file]
/*
* Copyright (c) 2021, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 3-Clause Clear License
* and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear
* License was not distributed with this source code in the LICENSE file, you
* can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the
* Alliance for Open Media Patent License 1.0 was not distributed with this
* source code in the PATENTS file, you can obtain it at
* aomedia.org/license/patent-license/.
*/
#ifndef AOM_AV1_COMMON_MVREF_COMMON_H_
#define AOM_AV1_COMMON_MVREF_COMMON_H_
#include "av1/common/av1_common_int.h"
#include "av1/common/blockd.h"
#if CONFIG_FLEX_MVRES
#include "av1/common/mv.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
#if CONFIG_SMVP_IMPROVEMENT
#define MVREF_ROWS 1
#define MVREF_COLS 3
#else
#define MVREF_ROW_COLS 3
#endif // CONFIG_SMVP_IMPROVEMENT
// Set the upper limit of the motion vector component magnitude.
// This would make a motion vector fit in 26 bits. Plus 3 bits for the
// reference frame index. A tuple of motion vector can hence be stored within
// 32 bit range for efficient load/store operations.
#define REFMVS_LIMIT ((1 << 12) - 1)
typedef struct position {
int row;
int col;
} POSITION;
#if CONFIG_TIP
#define MAX_OFFSET_WIDTH 64
#define MAX_OFFSET_HEIGHT 0
#define MAX_OFFSET_HEIGHT_LOG2 (MAX_OFFSET_HEIGHT >> TMVP_MI_SZ_LOG2)
#define MAX_OFFSET_WIDTH_LOG2 (MAX_OFFSET_WIDTH >> TMVP_MI_SZ_LOG2)
static AOM_INLINE int get_block_position(AV1_COMMON *cm, int *mi_r, int *mi_c,
int blk_row, int blk_col, MV mv,
int sign_bias) {
const int base_blk_row = (blk_row >> TMVP_MI_SZ_LOG2) << TMVP_MI_SZ_LOG2;
const int base_blk_col = (blk_col >> TMVP_MI_SZ_LOG2) << TMVP_MI_SZ_LOG2;
// The motion vector in units of 1/8-pel
const int shift = (3 + TMVP_MI_SZ_LOG2);
const int row_offset =
(mv.row >= 0) ? (mv.row >> shift) : -((-mv.row) >> shift);
const int col_offset =
(mv.col >= 0) ? (mv.col >> shift) : -((-mv.col) >> shift);
const int row =
(sign_bias == 1) ? blk_row - row_offset : blk_row + row_offset;
const int col =
(sign_bias == 1) ? blk_col - col_offset : blk_col + col_offset;
if (row < 0 || row >= (cm->mi_params.mi_rows >> TMVP_SHIFT_BITS) || col < 0 ||
col >= (cm->mi_params.mi_cols >> TMVP_SHIFT_BITS))
return 0;
if (row < base_blk_row - MAX_OFFSET_HEIGHT_LOG2 ||
row >= base_blk_row + TMVP_MI_SIZE + MAX_OFFSET_HEIGHT_LOG2 ||
col < base_blk_col - MAX_OFFSET_WIDTH_LOG2 ||
col >= base_blk_col + TMVP_MI_SIZE + MAX_OFFSET_WIDTH_LOG2)
return 0;
*mi_r = row;
*mi_c = col;
return 1;
}
#endif // CONFIG_TIP
// clamp_mv_ref
#define MV_BORDER (16 << 3) // Allow 16 pels in 1/8th pel units
static INLINE int get_relative_dist(const OrderHintInfo *oh, int a, int b) {
if (!oh->enable_order_hint) return 0;
const int bits = oh->order_hint_bits_minus_1 + 1;
assert(bits >= 1);
assert(a >= 0 && a < (1 << bits));
assert(b >= 0 && b < (1 << bits));
int diff = a - b;
const int m = 1 << (bits - 1);
diff = (diff & (m - 1)) - (diff & m);
return diff;
}
static INLINE void clamp_mv_ref(MV *mv, int bw, int bh, const MACROBLOCKD *xd) {
const SubpelMvLimits mv_limits = {
xd->mb_to_left_edge - GET_MV_SUBPEL(bw) - MV_BORDER,
xd->mb_to_right_edge + GET_MV_SUBPEL(bw) + MV_BORDER,
xd->mb_to_top_edge - GET_MV_SUBPEL(bh) - MV_BORDER,
xd->mb_to_bottom_edge + GET_MV_SUBPEL(bh) + MV_BORDER
};
clamp_mv(mv, &mv_limits);
}
// Convert a global motion vector into a motion vector at the centre of the
// given block.
//
// The resulting motion vector will have three fractional bits of precision. If
// precision < MV_SUBPEL_EIGHTH, the bottom bit will always be zero. If
// CONFIG_AMVR and precision == MV_SUBPEL_NONE, the bottom three bits will be
// zero (so the motion vector represents an integer)
#if CONFIG_FLEX_MVRES
static INLINE int_mv get_warp_motion_vector(const MACROBLOCKD *xd,
const WarpedMotionParams *model,
MvSubpelPrecision precision,
BLOCK_SIZE bsize, int mi_col,
int mi_row) {
#else
static INLINE int_mv get_warp_motion_vector(const MACROBLOCKD *xd,
const WarpedMotionParams *model,
int allow_hp, BLOCK_SIZE bsize,
int mi_col, int mi_row,
int is_integer) {
#endif
int_mv res;
if (model->wmtype == IDENTITY) {
res.as_int = 0;
return res;
}
const int32_t *mat = model->wmmat;
int x, y, tx, ty;
if (model->wmtype == TRANSLATION) {
// All global motion vectors are stored with WARPEDMODEL_PREC_BITS (16)
// bits of fractional precision. The offset for a translation is stored in
// entries 0 and 1. For translations, all but the top three (two if
// precision < MV_SUBPEL_EIGHTH) fractional bits are always
// zero.
//
#if CONFIG_FLEX_MVRES
// After the right shifts, there are 3 fractional bits of precision. If
// precision < MV_SUBPEL_EIGHTH is false, the bottom bit is always zero
// (so we don't need a call to convert_to_trans_prec here)
res.as_mv.col = model->wmmat[0] >> WARPEDMODEL_TO_MV_SHIFT;
res.as_mv.row = model->wmmat[1] >> WARPEDMODEL_TO_MV_SHIFT;
clamp_mv_ref(&res.as_mv, xd->width << MI_SIZE_LOG2,
xd->height << MI_SIZE_LOG2, xd);
// When extended warp prediction is enabled, the warp model can be derived
// from the neighbor. Neighbor may have different MV precision than current
// block. Therefore, this assertion is not valid when
// CONFIG_EXTENDED_WARP_PREDICTION is enabled
// When subblock warp mv is enabled. The precision is kept as higherst
// regardless the frame level mv during search
#if !CONFIG_EXTENDED_WARP_PREDICTION && !CONFIG_C071_SUBBLK_WARPMV
assert(IMPLIES(1 & (res.as_mv.row | res.as_mv.col),
precision == MV_PRECISION_ONE_EIGHTH_PEL));
#endif
#if CONFIG_C071_SUBBLK_WARPMV
if (precision < MV_PRECISION_HALF_PEL)
#endif // CONFIG_C071_SUBBLK_WARPMV
lower_mv_precision(&res.as_mv, precision);
#else
// After the right shifts, there are 3 fractional bits of precision. If
// allow_hp is false, the bottom bit is always zero (so we don't need a
// call to convert_to_trans_prec here)
res.as_mv.col = model->wmmat[0] >> WARPEDMODEL_TO_MV_SHIFT;
res.as_mv.row = model->wmmat[1] >> WARPEDMODEL_TO_MV_SHIFT;
clamp_mv_ref(&res.as_mv, xd->width << MI_SIZE_LOG2,
xd->height << MI_SIZE_LOG2, xd);
#if !CONFIG_EXTENDED_WARP_PREDICTION && !CONFIG_C071_SUBBLK_WARPMV
assert(IMPLIES(1 & (res.as_mv.row | res.as_mv.col), allow_hp));
#endif
if (is_integer) {
integer_mv_precision(&res.as_mv);
}
#endif
return res;
}
x = block_center_x(mi_col, bsize);
y = block_center_y(mi_row, bsize);
if (model->wmtype == ROTZOOM) {
assert(model->wmmat[5] == model->wmmat[2]);
assert(model->wmmat[4] == -model->wmmat[3]);
}
const int xc =
(mat[2] - (1 << WARPEDMODEL_PREC_BITS)) * x + mat[3] * y + mat[0];
const int yc =
mat[4] * x + (mat[5] - (1 << WARPEDMODEL_PREC_BITS)) * y + mat[1];
#if CONFIG_FLEX_MVRES
tx = convert_to_trans_prec(precision, xc);
ty = convert_to_trans_prec(precision, yc);
#else
tx = convert_to_trans_prec(allow_hp, xc);
ty = convert_to_trans_prec(allow_hp, yc);
#endif
res.as_mv.row = clamp(ty, MV_LOW + 1, MV_UPP - 1);
res.as_mv.col = clamp(tx, MV_LOW + 1, MV_UPP - 1);
clamp_mv_ref(&res.as_mv, xd->width << MI_SIZE_LOG2,
xd->height << MI_SIZE_LOG2, xd);
#if CONFIG_FLEX_MVRES
#if CONFIG_C071_SUBBLK_WARPMV
if (precision < MV_PRECISION_HALF_PEL)
#endif // CONFIG_C071_SUBBLK_WARPMV
lower_mv_precision(&res.as_mv, precision);
#else
if (is_integer) {
integer_mv_precision(&res.as_mv);
}
#endif
return res;
}
static INLINE int_mv get_block_mv(const MB_MODE_INFO *candidate,
#if CONFIG_C071_SUBBLK_WARPMV
const SUBMB_INFO *submi,
#endif // CONFIG_C071_SUBBLK_WARPMV
int which_mv) {
#if CONFIG_C071_SUBBLK_WARPMV
return is_warp_mode(candidate->motion_mode) ? submi->mv[which_mv]
: candidate->mv[which_mv];
#else
return candidate->mv[which_mv];
#endif // CONFIG_C071_SUBBLK_WARPMV
}
#if CONFIG_WARPMV
// return derive MV from the ref_warp_model
// ref_warp_model is extracted from the WRL listb before calling this function
static INLINE int_mv get_mv_from_wrl(const MACROBLOCKD *xd,
const WarpedMotionParams *ref_warp_model,
#if CONFIG_FLEX_MVRES
MvSubpelPrecision pb_mv_precision,
#else
int allow_high_precision_mv,
int cur_frame_force_integer_mv,
#endif
BLOCK_SIZE bsize, int mi_col, int mi_row) {
int_mv mv;
assert(ref_warp_model);
mv = get_warp_motion_vector(xd, ref_warp_model,
#if CONFIG_FLEX_MVRES
pb_mv_precision,
#else
allow_high_precision_mv,
#endif
bsize, mi_col, mi_row
#if !CONFIG_FLEX_MVRES
,
cur_frame_force_integer_mv
#endif
);
return mv;
}
#endif // CONFIG_WARPMV
// Checks that the given mi_row, mi_col and search point
// are inside the borders of the tile.
static INLINE int is_inside(const TileInfo *const tile, int mi_col, int mi_row,
const POSITION *mi_pos) {
return !(mi_row + mi_pos->row < tile->mi_row_start ||
mi_col + mi_pos->col < tile->mi_col_start ||
mi_row + mi_pos->row >= tile->mi_row_end ||
mi_col + mi_pos->col >= tile->mi_col_end);
}
static INLINE int find_valid_row_offset(const TileInfo *const tile, int mi_row,
int row_offset) {
return clamp(row_offset, tile->mi_row_start - mi_row,
tile->mi_row_end - mi_row - 1);
}
static INLINE int find_valid_col_offset(const TileInfo *const tile, int mi_col,
int col_offset) {
return clamp(col_offset, tile->mi_col_start - mi_col,
tile->mi_col_end - mi_col - 1);
}
#if !CONFIG_FLEX_MVRES
static INLINE void lower_mv_precision(MV *mv, int allow_hp, int is_integer) {
if (is_integer) {
integer_mv_precision(mv);
} else {
if (!allow_hp) {
if (mv->row & 1) mv->row += (mv->row > 0 ? -1 : 1);
if (mv->col & 1) mv->col += (mv->col > 0 ? -1 : 1);
}
}
}
#endif
#if CONFIG_ALLOW_SAME_REF_COMPOUND
// Converts a pair of distinct indices (rf) each in [0, n-1],
// to a combined index in [0, n*(n+1)/2].
// The order of the combined index is as follows:
// (0, 0), (0, 1), (0, 2), (0, 3), ..., (0, n-1),
// (1, 1), (1, 2), (1, 3), ..., (1, n-1),
// (2, 2), (2, 3), ..., (2, n-1),
// ...
// (n-1, n-1)
static INLINE int8_t single2comb(int n, const int8_t *const rf) {
assert(rf[0] < n && rf[1] < n);
int8_t rfr[2] = { rf[0], rf[1] };
if (rf[1] < rf[0]) {
rfr[0] = rf[1];
rfr[1] = rf[0];
}
int off = (n + 1) * rfr[0] - rfr[0] * (rfr[0] + 1) / 2;
int combindex = off + rfr[1] - rfr[0];
assert(combindex >= 0 &&
combindex < (INTER_REFS_PER_FRAME * (INTER_REFS_PER_FRAME + 1) / 2));
return combindex;
}
// Converts a combined index in [0, n*(n+1)/2] to a pair of single
// ref indices (rf) each in [0, n-1]. See comment above for order
// of the combined indexing.
static INLINE void comb2single(int n, int8_t combindex, int8_t *rf) {
assert(combindex < n * (n + 1) / 2);
int i = n, j = n;
rf[0] = 0;
// Starting form n-1, keep reducing the row length by 1 until
// combindex < i
while (i <= combindex) {
rf[0]++;
j--;
i += j;
}
rf[1] = combindex - i + j + rf[0];
assert(rf[0] >= 0);
assert(rf[1] >= rf[0]);
}
#else
// Converts a pair of distinct indices (rf) each in [0, n-1],
// to a combined index in [0, n*(n-1)/2].
// The order of the combined index is as follows:
// (0, 1), (0, 2), (0, 3), ..., (0, n-1),
// (1, 2), (1, 3), ..., (1, n-1),
// (2, 3), ..., (2, n-1),
// ...
// (n-2, n-1)
static INLINE int8_t single2comb(int n, const int8_t *const rf) {
assert(rf[0] < n && rf[1] < n);
int8_t rfr[2] = { rf[0], rf[1] };
if (rf[1] < rf[0]) {
rfr[0] = rf[1];
rfr[1] = rf[0];
}
int off = n * rfr[0] - rfr[0] * (rfr[0] + 1) / 2;
int combindex = off + rfr[1] - rfr[0] - 1;
return combindex;
}
// Converts a combined index in [0, n*(n-1)/2] to a pair of single
// ref indices (rf) each in [0, n-1]. See comment above for order
// of the combined indexing.
static INLINE void comb2single(int n, int8_t combindex, int8_t *rf) {
assert(combindex < n * (n - 1) / 2);
int i = n - 1, j = n - 1;
rf[0] = 0;
// Starting form n-1, keep reducing the row length by 1 until
// combindex < i
while (i <= combindex) {
rf[0]++;
j--;
i += j;
}
rf[1] = combindex - i + j + rf[0] + 1;
assert(rf[1] > rf[0]);
}
#endif // CONFIG_ALLOW_SAME_REF_COMPOUND
static INLINE int8_t av1_ref_frame_type(const MV_REFERENCE_FRAME *const rf) {
if (!is_inter_ref_frame(rf[0])) {
// Intra or invalid
return rf[0];
} else if (!is_inter_ref_frame(rf[1])) {
// single ref
return rf[0];
} else {
// compound ref
assert(rf[0] < INTER_REFS_PER_FRAME);
assert(rf[1] < INTER_REFS_PER_FRAME);
return single2comb(INTER_REFS_PER_FRAME, rf) + INTER_REFS_PER_FRAME;
}
}
static INLINE void av1_set_ref_frame(MV_REFERENCE_FRAME *rf,
MV_REFERENCE_FRAME ref_frame_type) {
if (ref_frame_type == INTRA_FRAME ||
#if CONFIG_TIP
is_tip_ref_frame(ref_frame_type) ||
#endif // CONFIG_TIP
ref_frame_type < INTER_REFS_PER_FRAME) {
rf[0] = ref_frame_type;
rf[1] = NONE_FRAME;
} else {
comb2single(INTER_REFS_PER_FRAME, ref_frame_type - INTER_REFS_PER_FRAME,
rf);
}
return;
}
#if !CONFIG_C076_INTER_MOD_CTX
static uint16_t compound_mode_ctx_map[3][COMP_NEWMV_CTXS] = {
{ 0, 1, 1, 1, 1 },
{ 1, 2, 3, 4, 4 },
{ 4, 4, 5, 6, 7 },
};
#endif // !CONFIG_C076_INTER_MOD_CTX
static INLINE int16_t av1_mode_context_pristine(
const int16_t *const mode_context, const MV_REFERENCE_FRAME *const rf) {
const int8_t ref_frame = av1_ref_frame_type(rf);
return mode_context[ref_frame];
}
static INLINE int16_t av1_mode_context_analyzer(
const int16_t *const mode_context, const MV_REFERENCE_FRAME *const rf) {
const int8_t ref_frame = av1_ref_frame_type(rf);
if (!is_inter_ref_frame(rf[1])) return mode_context[ref_frame];
const int16_t newmv_ctx = mode_context[ref_frame] & NEWMV_CTX_MASK;
#if CONFIG_C076_INTER_MOD_CTX
const int16_t comp_ctx = newmv_ctx;
#else
const int16_t refmv_ctx =
(mode_context[ref_frame] >> REFMV_OFFSET) & REFMV_CTX_MASK;
const int16_t comp_ctx = compound_mode_ctx_map[refmv_ctx >> 1][AOMMIN(
newmv_ctx, COMP_NEWMV_CTXS - 1)];
#endif // CONFIG_C076_INTER_MOD_CTX
return comp_ctx;
}
static INLINE aom_cdf_prob *av1_get_drl_cdf(FRAME_CONTEXT *ec_ctx,
const uint16_t *ref_mv_weight,
const int16_t mode_ctx,
int ref_idx) {
(void)ref_mv_weight;
const int ctx = av1_drl_ctx(mode_ctx);
switch (ref_idx) {
case 0: return ec_ctx->drl_cdf[0][ctx];
case 1: return ec_ctx->drl_cdf[1][ctx];
default: return ec_ctx->drl_cdf[2][ctx];
}
}
#if CONFIG_WARP_REF_LIST
// Get the cdf of the warp_ref_idx
static INLINE aom_cdf_prob *av1_get_warp_ref_idx_cdf(FRAME_CONTEXT *ec_ctx,
int bit_idx) {
const int ctx = 0;
switch (bit_idx) {
case 0: return ec_ctx->warp_ref_idx_cdf[0][ctx];
case 1: return ec_ctx->warp_ref_idx_cdf[1][ctx];
default: return ec_ctx->warp_ref_idx_cdf[2][ctx];
}
}
#endif // CONFIG_WARP_REF_LIST
// TODO(jingning): Consider the use of lookup table for (num / den)
// altogether.
static int div_mult[32] = { 0, 16384, 8192, 5461, 4096, 3276, 2730, 2340,
2048, 1820, 1638, 1489, 1365, 1260, 1170, 1092,
1024, 963, 910, 862, 819, 780, 744, 712,
682, 655, 630, 606, 585, 564, 546, 528 };
static AOM_INLINE void get_mv_projection(MV *output, MV ref, int num, int den) {
den = AOMMIN(den, MAX_FRAME_DISTANCE);
num = num > 0 ? AOMMIN(num, MAX_FRAME_DISTANCE)
: AOMMAX(num, -MAX_FRAME_DISTANCE);
const int mv_row =
ROUND_POWER_OF_TWO_SIGNED(ref.row * num * div_mult[den], 14);
const int mv_col =
ROUND_POWER_OF_TWO_SIGNED(ref.col * num * div_mult[den], 14);
const int clamp_max = MV_UPP - 1;
const int clamp_min = MV_LOW + 1;
output->row = (int16_t)clamp(mv_row, clamp_min, clamp_max);
output->col = (int16_t)clamp(mv_col, clamp_min, clamp_max);
}
void av1_setup_frame_buf_refs(AV1_COMMON *cm);
void av1_setup_frame_sign_bias(AV1_COMMON *cm);
void av1_setup_skip_mode_allowed(AV1_COMMON *cm);
void av1_setup_motion_field(AV1_COMMON *cm);
#if CONFIG_SMVP_IMPROVEMENT
void av1_setup_ref_frame_sides(AV1_COMMON *cm);
#endif // CONFIG_SMVP_IMPROVEMENT
static INLINE void av1_collect_neighbors_ref_counts(MACROBLOCKD *const xd) {
av1_zero(xd->neighbors_ref_counts);
uint8_t *const ref_counts = xd->neighbors_ref_counts;
for (int i = 0; i < MAX_NUM_NEIGHBORS; ++i) {
const MB_MODE_INFO *const neighbor = xd->neighbors[i];
if (neighbor != NULL &&
#if CONFIG_TIP
!is_tip_ref_frame(neighbor->ref_frame[0]) &&
#endif // CONFIG_TIP
is_inter_block(neighbor, xd->tree_type)) {
ref_counts[neighbor->ref_frame[0]]++;
if (has_second_ref(neighbor)) {
ref_counts[neighbor->ref_frame[1]]++;
}
}
}
}
void av1_copy_frame_mvs(const AV1_COMMON *const cm,
const MB_MODE_INFO *const mi, int mi_row, int mi_col,
int x_inside_boundary, int y_inside_boundary);
#if CONFIG_C076_INTER_MOD_CTX
// Scans neighboring blocks for inter mode contexts
void av1_find_mode_ctx(const AV1_COMMON *cm, const MACROBLOCKD *xd,
int16_t *mode_context, MV_REFERENCE_FRAME ref_frame);
#endif // CONFIG_C076_INTER_MOD_CTX
// The global_mvs output parameter points to an array of REF_FRAMES elements.
// The caller may pass a null global_mvs if it does not need the global_mvs
// output.
void av1_find_mv_refs(
const AV1_COMMON *cm, const MACROBLOCKD *xd, MB_MODE_INFO *mi,
MV_REFERENCE_FRAME ref_frame, uint8_t ref_mv_count[MODE_CTX_REF_FRAMES],
CANDIDATE_MV ref_mv_stack[][MAX_REF_MV_STACK_SIZE],
uint16_t ref_mv_weight[][MAX_REF_MV_STACK_SIZE],
int_mv mv_ref_list[][MAX_MV_REF_CANDIDATES], int_mv *global_mvs
#if !CONFIG_C076_INTER_MOD_CTX
,
int16_t *mode_context
#endif //! CONFIG_C076_INTER_MOD_CTX
#if CONFIG_WARP_REF_LIST
,
WARP_CANDIDATE warp_param_stack[][MAX_WARP_REF_CANDIDATES],
int max_num_of_warp_candidates,
uint8_t valid_num_warp_candidates[INTER_REFS_PER_FRAME]
#endif // CONFIG_WARP_REF_LIST
);
#if CONFIG_WARP_REF_LIST
// Initialize the warp cadidate lists to invalid values
void av1_initialize_warp_wrl_list(
WARP_CANDIDATE warp_param_stack[][MAX_WARP_REF_CANDIDATES],
uint8_t valid_num_warp_candidates[INTER_REFS_PER_FRAME]);
#endif // CONFIG_WARP_REF_LIST
// check a list of motion vectors by sad score using a number rows of pixels
// above and a number cols of pixels in the left to select the one with best
// score to use as ref motion vector
#if CONFIG_FLEX_MVRES
void av1_find_best_ref_mvs(int_mv *mvlist, int_mv *nearest_mv, int_mv *near_mv,
MvSubpelPrecision precision);
#else
void av1_find_best_ref_mvs(int allow_hp, int_mv *mvlist, int_mv *nearest_mv,
int_mv *near_mv, int is_integer);
#endif
uint8_t av1_selectSamples(MV *mv, int *pts, int *pts_inref, int len,
BLOCK_SIZE bsize);
uint8_t av1_findSamples(const AV1_COMMON *cm, MACROBLOCKD *xd, int *pts,
int *pts_inref);
#define INTRABC_DELAY_PIXELS 256 // Delay of 256 pixels
#define INTRABC_DELAY_SB64 (INTRABC_DELAY_PIXELS / 64)
static INLINE void av1_find_ref_dv(int_mv *ref_dv, const TileInfo *const tile,
int mib_size, int mi_row) {
if (mi_row - mib_size < tile->mi_row_start) {
ref_dv->as_fullmv.row = 0;
ref_dv->as_fullmv.col = -MI_SIZE * mib_size - INTRABC_DELAY_PIXELS;
} else {
ref_dv->as_fullmv.row = -MI_SIZE * mib_size;
ref_dv->as_fullmv.col = 0;
}
convert_fullmv_to_mv(ref_dv);
}
#if CONFIG_IBC_SR_EXT == 1
static INLINE int av1_is_dv_in_local_range_64x64(const MV dv,
const MACROBLOCKD *xd,
int mi_row, int mi_col, int bh,
int bw, int mib_size_log2) {
if (((dv.col >> 3) + bw) > 0 && ((dv.row >> 3) + bh) > 0) return 0;
const int SCALE_PX_TO_MV = 8;
const int src_top_edge = mi_row * MI_SIZE * SCALE_PX_TO_MV + dv.row;
const int src_left_edge = mi_col * MI_SIZE * SCALE_PX_TO_MV + dv.col;
const int src_bottom_edge = (mi_row * MI_SIZE + bh) * SCALE_PX_TO_MV + dv.row;
const int src_right_edge = (mi_col * MI_SIZE + bw) * SCALE_PX_TO_MV + dv.col;
const int src_top_y = src_top_edge >> 3;
const int src_left_x = src_left_edge >> 3;
const int src_bottom_y = (src_bottom_edge >> 3) - 1;
const int src_right_x = (src_right_edge >> 3) - 1;
const int active_left_x = mi_col * MI_SIZE;
const int active_top_y = mi_row * MI_SIZE;
const int sb_size_log2 = mib_size_log2 + MI_SIZE_LOG2;
const int sb_size = 1 << sb_size_log2;
const int sb_mi_size = sb_size >> MI_SIZE_LOG2;
int valid_size_log2 = sb_size_log2 > 6 ? 6 : sb_size_log2;
int valid =
src_top_y >> valid_size_log2 == active_top_y >> valid_size_log2 &&
src_left_x >> valid_size_log2 == active_left_x >> valid_size_log2 &&
src_bottom_y >> valid_size_log2 == active_top_y >> valid_size_log2 &&
src_right_x >> valid_size_log2 == active_left_x >> valid_size_log2;
if (valid) {
const int LT_mi_col_offset =
(src_left_x >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int LT_mi_row_offset = (src_top_y >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int LT_pos =
LT_mi_row_offset * xd->is_mi_coded_stride + LT_mi_col_offset;
const int is_chroma_tree = xd->tree_type == CHROMA_PART;
const unsigned char *is_mi_coded_map = xd->is_mi_coded[is_chroma_tree];
if (is_mi_coded_map[LT_pos] == 0) return 0;
const int BR_mi_col_offset =
(src_right_x >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int BR_mi_row_offset =
(src_bottom_y >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int BR_pos =
BR_mi_row_offset * xd->is_mi_coded_stride + BR_mi_col_offset;
if (is_mi_coded_map[BR_pos] == 0) return 0;
assert(src_right_x < active_left_x || src_bottom_y < active_top_y);
return 1;
}
return 0;
}
#endif // CONFIG_IBC_SR_EXT == 1
#if CONFIG_IBC_SR_EXT == 2
static INLINE int av1_is_dv_in_local_range(const MV dv, const MACROBLOCKD *xd,
int mi_row, int mi_col, int bh,
int bw, int mib_size_log2) {
const int SCALE_PX_TO_MV = 8;
const int src_top_edge = mi_row * MI_SIZE * SCALE_PX_TO_MV + dv.row;
const int src_left_edge = mi_col * MI_SIZE * SCALE_PX_TO_MV + dv.col;
const int src_bottom_edge = (mi_row * MI_SIZE + bh) * SCALE_PX_TO_MV + dv.row;
const int src_right_edge = (mi_col * MI_SIZE + bw) * SCALE_PX_TO_MV + dv.col;
const int src_top_y = src_top_edge >> 3;
const int src_left_x = src_left_edge >> 3;
const int src_bottom_y = (src_bottom_edge >> 3) - 1;
const int src_right_x = (src_right_edge >> 3) - 1;
const int active_left_x = mi_col * MI_SIZE;
const int active_top_y = mi_row * MI_SIZE;
const int sb_size_log2 = mib_size_log2 + MI_SIZE_LOG2;
if ((src_top_y >> sb_size_log2) < (active_top_y >> sb_size_log2)) return 0;
if ((src_bottom_y >> sb_size_log2) > (active_top_y >> sb_size_log2)) return 0;
if (((dv.col >> 3) + bw) > 0 && ((dv.row >> 3) + bh) > 0) return 0;
const int numLeftSB =
(1 << ((7 - sb_size_log2) << 1)) - ((sb_size_log2 < 7) ? 1 : 0);
const int valid_SB =
((src_right_x >> sb_size_log2) <= (active_left_x >> sb_size_log2)) &&
((src_left_x >> sb_size_log2) >=
((active_left_x >> sb_size_log2) - numLeftSB));
if (!valid_SB) return 0;
int TL_same_sb = 0;
int BR_same_sb = 0;
const int sb_size = 1 << sb_size_log2;
const int sb_mi_size = sb_size >> MI_SIZE_LOG2;
const int is_chroma_tree = xd->tree_type == CHROMA_PART;
const unsigned char *is_mi_coded_map = xd->is_mi_coded[is_chroma_tree];
if ((sb_size_log2 == 7)) {
if ((src_left_x >> sb_size_log2) == ((active_left_x >> sb_size_log2) - 1)) {
const int src_colo_left_x = src_left_x + sb_size;
const int src_colo_top_y = src_top_y;
const int offset64x = (src_colo_left_x >> 6) << 6;
const int offset64y = (src_colo_top_y >> 6) << 6;
const int mi_col_offset = (offset64x >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int mi_row_offset = (offset64y >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int pos = mi_row_offset * xd->is_mi_coded_stride + mi_col_offset;
if (is_mi_coded_map[pos]) return 0;
if (offset64x == active_left_x && offset64y == active_top_y) return 0;
TL_same_sb = 0;
} else {
TL_same_sb = 1;
}
} else {
if ((src_left_x >> sb_size_log2) < (active_left_x >> sb_size_log2)) {
TL_same_sb = 0;
} else {
TL_same_sb = 1;
}
}
if (TL_same_sb) {
const int LT_mi_col_offset =
(src_left_x >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int LT_mi_row_offset = (src_top_y >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int LT_pos =
LT_mi_row_offset * xd->is_mi_coded_stride + LT_mi_col_offset;
if (is_mi_coded_map[LT_pos] == 0) return 0;
}
BR_same_sb = (src_right_x >> sb_size_log2) == (active_left_x >> sb_size_log2);
if (BR_same_sb) {
const int BR_mi_col_offset =
(src_right_x >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int BR_mi_row_offset =
(src_bottom_y >> MI_SIZE_LOG2) & (sb_mi_size - 1);
const int BR_pos =
BR_mi_row_offset * xd->is_mi_coded_stride + BR_mi_col_offset;
if (is_mi_coded_map[BR_pos] == 0) return 0;
assert(src_right_x < active_left_x || src_bottom_y < active_top_y);
}
return 1;
}
#endif // CONFIG_IBC_SR_EXT == 2
static INLINE int av1_is_dv_valid(const MV dv, const AV1_COMMON *cm,
const MACROBLOCKD *xd, int mi_row, int mi_col,
BLOCK_SIZE bsize, int mib_size_log2) {
const int bw = block_size_wide[bsize];
const int bh = block_size_high[bsize];
const int SCALE_PX_TO_MV = 8;
// Disallow subpixel for now
// SUBPEL_MASK is not the correct scale
if (((dv.row & (SCALE_PX_TO_MV - 1)) || (dv.col & (SCALE_PX_TO_MV - 1))))
return 0;
const TileInfo *const tile = &xd->tile;
// Is the source top-left inside the current tile?
const int src_top_edge = mi_row * MI_SIZE * SCALE_PX_TO_MV + dv.row;
const int tile_top_edge = tile->mi_row_start * MI_SIZE * SCALE_PX_TO_MV;
if (src_top_edge < tile_top_edge) return 0;
const int src_left_edge = mi_col * MI_SIZE * SCALE_PX_TO_MV + dv.col;
const int tile_left_edge = tile->mi_col_start * MI_SIZE * SCALE_PX_TO_MV;
if (src_left_edge < tile_left_edge) return 0;
// Is the bottom right inside the current tile?
const int src_bottom_edge = (mi_row * MI_SIZE + bh) * SCALE_PX_TO_MV + dv.row;
const int tile_bottom_edge = tile->mi_row_end * MI_SIZE * SCALE_PX_TO_MV;
if (src_bottom_edge > tile_bottom_edge) return 0;
const int src_right_edge = (mi_col * MI_SIZE + bw) * SCALE_PX_TO_MV + dv.col;
const int tile_right_edge = tile->mi_col_end * MI_SIZE * SCALE_PX_TO_MV;
if (src_right_edge > tile_right_edge) return 0;
// Special case for sub 8x8 chroma cases, to prevent referring to chroma
// pixels outside current tile.
if (xd->is_chroma_ref && av1_num_planes(cm) > 1) {
const struct macroblockd_plane *const pd = &xd->plane[1];
if (bw < 8 && pd->subsampling_x)
if (src_left_edge < tile_left_edge + 4 * SCALE_PX_TO_MV) return 0;
if (bh < 8 && pd->subsampling_y)
if (src_top_edge < tile_top_edge + 4 * SCALE_PX_TO_MV) return 0;
}
#if CONFIG_IBC_SR_EXT
if (cm->features.allow_local_intrabc) {
if (bw <= 64 || bh <= 64) {
int valid = 0;
int tmp_row = mi_row;
int tmp_col = mi_col;
int tmp_bh = bh;
int tmp_bw = bw;
if (!cm->seq_params.enable_sdp || !frame_is_intra_only(cm)) {
if (xd->is_chroma_ref && av1_num_planes(cm) > 1) {
#if CONFIG_EXT_RECUR_PARTITIONS
if (xd->mi && xd->mi[0]) {
const CHROMA_REF_INFO *chroma_ref_info =
&xd->mi[0]->chroma_ref_info;
const BLOCK_SIZE bsize_base = chroma_ref_info->bsize_base;
tmp_row = chroma_ref_info->mi_row_chroma_base;
tmp_col = chroma_ref_info->mi_col_chroma_base;
tmp_bh = block_size_high[bsize_base];
tmp_bw = block_size_wide[bsize_base];
}
#else // CONFIG_EXT_RECUR_PARTITIONS
const struct macroblockd_plane *const pd = &xd->plane[1];
if ((bw < 8 && pd->subsampling_x) && (bh < 8 && pd->subsampling_y)) {
tmp_row = mi_row / 2 * 2;
tmp_col = mi_col / 2 * 2;
tmp_bh = 8;
tmp_bw = 8;
} else if (bw < 8 && pd->subsampling_x) {
tmp_col = mi_col / 2 * 2;
tmp_bw = 8;
} else if (bh < 8 && pd->subsampling_y) {
tmp_row = mi_row / 2 * 2;
tmp_bh = 8;
}
#endif // CONFIG_EXT_RECUR_PARTITIONS
}
}
// The size of local search range is determined by the value of
// CONFIG_IBC_SR_EXT. 0: disabled, 1: 64x64 (default), 2: 128x128.
#if CONFIG_IBC_SR_EXT == 1
valid = av1_is_dv_in_local_range_64x64(dv, xd, tmp_row, tmp_col, tmp_bh,
tmp_bw, mib_size_log2);
#endif // CONFIG_IBC_SR_EXT == 1
#if CONFIG_IBC_SR_EXT == 2
valid = av1_is_dv_in_local_range(dv, xd, tmp_row, tmp_col, tmp_bh, tmp_bw,
mib_size_log2);
#endif // CONFIG_IBC_SR_EXT == 2
if (valid) return 1;
}
}
if (!frame_is_intra_only(cm)) return 0;
if (!cm->features.allow_global_intrabc) return 0;
#endif // CONFIG_IBC_SR_EXT
// Is the bottom right within an already coded SB? Also consider additional
// constraints to facilitate HW decoder.
const int max_mib_size = 1 << mib_size_log2;
const int active_sb_row = mi_row >> mib_size_log2;
const int active_sb64_col = (mi_col * MI_SIZE) >> 6;
const int sb_size = max_mib_size * MI_SIZE;
const int src_sb_row = ((src_bottom_edge >> 3) - 1) / sb_size;
const int src_sb64_col = ((src_right_edge >> 3) - 1) >> 6;
const int total_sb64_per_row =
(((tile->mi_col_end - tile->mi_col_start - 1) >> 4) + 1);
const int active_sb64 = active_sb_row * total_sb64_per_row + active_sb64_col;
const int src_sb64 = src_sb_row * total_sb64_per_row + src_sb64_col;
if (src_sb64 >= active_sb64 - INTRABC_DELAY_SB64) return 0;
// Wavefront constraint: use only top left area of frame for reference.
const int gradient =
1 + INTRABC_DELAY_SB64 + (sb_size > 64) + 2 * (sb_size > 128);
const int wf_offset = gradient * (active_sb_row - src_sb_row);
if (src_sb_row > active_sb_row ||
src_sb64_col >= active_sb64_col - INTRABC_DELAY_SB64 + wf_offset)
return 0;
return 1;
}
#if CONFIG_REF_MV_BANK
#define MAX_RMB_SB_HITS 64
void av1_update_ref_mv_bank(const AV1_COMMON *const cm, MACROBLOCKD *const xd,
const MB_MODE_INFO *const mbmi);
#endif // CONFIG_REF_MV_BANK
#if CONFIG_C071_SUBBLK_WARPMV
// assign subblock mv from warp into submi
void assign_warpmv(const AV1_COMMON *cm, SUBMB_INFO **submi, BLOCK_SIZE bsize,
WarpedMotionParams *wm_params, int mi_row, int mi_col);
// span the first subblock info into all the rest subblocks in the same block
void span_submv(const AV1_COMMON *cm, SUBMB_INFO **submi, int mi_row,
int mi_col, BLOCK_SIZE bsize);
#endif
#if CONFIG_EXTENDED_WARP_PREDICTION
#if CONFIG_WARP_REF_LIST
void av1_update_warp_param_bank(const AV1_COMMON *const cm,
MACROBLOCKD *const xd,
const MB_MODE_INFO *const mbmi);
#endif // CONFIG_WARP_REF_LIST
// Decide what the base warp model should be when using WARP_DELTA.
// The warp model to use is signalled as a delta from this.
// The base model is stored into `params`, and can be modified further
// from there
//
// The MV which should be used at the center of this block is stored in
// `center_mv`. Once the non-translational parameters have been set,
// the translational part of the model can be set correctly using:
// av1_set_warp_translation(mi_row, mi_col, bsize, mv, params);
//
// If `center_mv` is not needed, the pointer can be set to NULL.
//
// The logic behind doing this is as follows:
// * If the current block is GLOBALMV, then we want to use the motion vector
// inferred from the global model. Conveniently, in this case that is already
// stored in mbmi->mv[0]
//
// * If the current block is NEWMV, then we want to use the signaled
// motion vector at the center of the block, regardless of the source
// of the base warp model.
//
// * If the mode is NEARMV, then we need to consider the source of the
// base params and the motion vector carefully:
//
// * If we're extending from a neighboring block, then the predicted
// motion vector (in mbmi->mv[0]) does *not* match the prediction
// from the base warp model. This because the predicted MV is
// set to the MV at the center of the *neighboring* block, to avoid
// having motion vector prediction depend on the construction of the
// neighbor's warp model.
// So in this case, we want to re-calculate the motion vector at
// the center of this block from the neighbor's warp model. This is
// okay, and does not introduce a similar parsing dependency, because
// this only affects the resulting warp parameters, not any of the syntax.
//
// * However, if we're not extending from a neighboring block, then we
// use the global warp as a base. In this case, taking the predicted
// MV from whatever ref block we used, is probably better than using the
// predicted MV from the global model, because if we wanted the latter
// then we would have used the GLOBALMV mode.
static INLINE void av1_get_warp_base_params(
const AV1_COMMON *cm,
#if !CONFIG_WARP_REF_LIST
const MACROBLOCKD *xd,
#endif //! CONFIG_WARP_REF_LIST
const MB_MODE_INFO *mbmi,
#if !CONFIG_WARP_REF_LIST
const CANDIDATE_MV *ref_mv_stack,
#endif //! CONFIG_WARP_REF_LIST
WarpedMotionParams *params, int_mv *center_mv
#if CONFIG_WARP_REF_LIST
,
const WARP_CANDIDATE *warp_param_stack
#endif // CONFIG_WARP_REF_LIST
) {
(void)cm;
#if !CONFIG_WARP_REF_LIST
if (mbmi->mode != GLOBALMV) {
// Look at the reference block selected via the DRL.
// If it is warped, use that warp model as a base; otherwise, use global
// motion
const CANDIDATE_MV *ref = &ref_mv_stack[mbmi->ref_mv_idx];
#if WARP_DELTA_REQUIRES_NEIGHBOR
bool ref_is_above =
xd->up_available && (ref->row_offset == -1 && ref->col_offset >= 0);
bool ref_is_left =
xd->left_available && (ref->col_offset == -1 && ref->row_offset >= 0);
bool ref_is_adjacent = ref_is_above || ref_is_left;
bool can_use_ref = ref_is_adjacent;
#else
bool ref_is_spatial = (ref->row_offset != OFFSET_NONSPATIAL) &&
(ref->col_offset != OFFSET_NONSPATIAL);
bool can_use_ref = ref_is_spatial;
#endif
if (can_use_ref) {
const MB_MODE_INFO *ref_mi =
xd->mi[ref->row_offset * xd->mi_stride + ref->col_offset];
bool ref_is_warped = is_warp_mode(ref_mi->motion_mode);
if (ref_is_warped) {
*params = ref_mi->wm_params[0];
if (center_mv != NULL) {
if (mbmi->mode == NEARMV) {
BLOCK_SIZE bsize = mbmi->sb_type[PLANE_TYPE_Y];
int mi_row = xd->mi_row;
int mi_col = xd->mi_col;
#if CONFIG_FLEX_MVRES
*center_mv = get_warp_motion_vector(xd, &ref_mi->wm_params[0],
mbmi->pb_mv_precision, bsize,
mi_col, mi_row);
#else
const int allow_high_precision_mv =
cm->features.allow_high_precision_mv;
const int force_integer_mv =
cm->features.cur_frame_force_integer_mv;
*center_mv = get_warp_motion_vector(
xd, &ref_mi->wm_params[0], allow_high_precision_mv, bsize,
mi_col, mi_row, force_integer_mv);
#endif
} else {
*center_mv = mbmi->mv[0];
}
}
return;
}
}
}
*params = xd->global_motion[mbmi->ref_frame[0]];
#else
assert(mbmi->warp_ref_idx < mbmi->max_num_warp_candidates);
*params = warp_param_stack[mbmi->warp_ref_idx].wm_params;
#endif //! CONFIG_WARP_REF_LIST
if (center_mv != NULL) {
*center_mv = mbmi->mv[0];
}
}
// Try to get the neighbor's warp model
// If this is possible, return true and set *wm_params to the neighbor's warp
// model.
// If this is not possible, return false and leave *wm_params unmodified.
//
// Encoders should only select warp_extend mode if this function returns true
// (indicating a useful model was available).
// But decoders must be prepared for the possibility than an encoder selects
// warp_extend even if this function returns false. In that case, the decoder
// should fall back to translational motion, generally by setting
// mbmi->wm_params[0].invalid = 1;
static INLINE void av1_get_neighbor_warp_model(const AV1_COMMON *cm,
const MACROBLOCKD *xd,
const MB_MODE_INFO *neighbor_mi,
WarpedMotionParams *wm_params) {
const WarpedMotionParams *gm_params =
&cm->global_motion[neighbor_mi->ref_frame[0]];
if (is_warp_mode(neighbor_mi->motion_mode)) {
*wm_params = neighbor_mi->wm_params[0];
} else if (is_global_mv_block(neighbor_mi, gm_params->wmtype)) {
*wm_params = *gm_params;
} else {
// Neighbor block is translation-only, so doesn't have
// a warp model. So we need to synthesize one.
// Note that, in this case, the neighbor might be compound, but the
// current block will always be single ref. So we have to figure out
// which of the neighbor's ref frames matches ours, and take that MV.
*wm_params = default_warp_params;
wm_params->wmtype = TRANSLATION;
int ref_frame = xd->mi[0]->ref_frame[0];
if (neighbor_mi->ref_frame[0] == ref_frame) {
wm_params->wmmat[0] =
neighbor_mi->mv[0].as_mv.col * (1 << (WARPEDMODEL_PREC_BITS - 3));
wm_params->wmmat[1] =
neighbor_mi->mv[0].as_mv.row * (1 << (WARPEDMODEL_PREC_BITS - 3));
} else {
assert(neighbor_mi->ref_frame[1] == ref_frame);
wm_params->wmmat[0] =
neighbor_mi->mv[1].as_mv.col * (1 << (WARPEDMODEL_PREC_BITS - 3));
wm_params->wmmat[1] =
neighbor_mi->mv[1].as_mv.row * (1 << (WARPEDMODEL_PREC_BITS - 3));
}
}
}
// The use_warp_extend symbol has two components to its context:
// First context is the extension type (copy, extend from warp model, etc.)
// Second context is log2(number of MI units along common edge)
static INLINE int av1_get_warp_extend_ctx1(const MACROBLOCKD *xd,
const MB_MODE_INFO *mbmi) {
if (mbmi->mode == NEARMV) {
return 0;
} else {
assert(mbmi->mode == NEWMV);
const TileInfo *const tile = &xd->tile;
const POSITION mi_pos = { xd->height - 1, -1 };
if (!(is_inside(tile, xd->mi_col, xd->mi_row, &mi_pos) &&
xd->left_available))
return 1;
const MB_MODE_INFO *left_mi =
xd->mi[mi_pos.row * xd->mi_stride + mi_pos.col];
if (!is_inter_ref_frame(left_mi->ref_frame[0])) return 1;
if (left_mi->ref_frame[0] != mbmi->ref_frame[0]) return 1;
const WarpedMotionParams *gm_params =
&xd->global_motion[left_mi->ref_frame[0]];
if (is_warp_mode(left_mi->motion_mode)) {
return 2;
} else if (is_global_mv_block(left_mi, gm_params->wmtype)) {
return 3;
} else {
// Neighbor block is translation-only
return 4;
}
}
}
static INLINE int av1_get_warp_extend_ctx2(const MACROBLOCKD *xd,
const MB_MODE_INFO *mbmi) {
if (mbmi->mode == NEARMV) {
return 0;
} else {
assert(mbmi->mode == NEWMV);
const TileInfo *const tile = &xd->tile;
const POSITION mi_pos = { -1, xd->width - 1 };
if (!(is_inside(tile, xd->mi_col, xd->mi_row, &mi_pos) && xd->up_available))
return 1;
const MB_MODE_INFO *above_mi =
xd->mi[mi_pos.row * xd->mi_stride + mi_pos.col];
if (!is_inter_ref_frame(above_mi->ref_frame[0])) return 1;
if (above_mi->ref_frame[0] != mbmi->ref_frame[0]) return 1;
const WarpedMotionParams *gm_params =
&xd->global_motion[above_mi->ref_frame[0]];
if (is_warp_mode(above_mi->motion_mode)) {
return 2;
} else if (is_global_mv_block(above_mi, gm_params->wmtype)) {
return 3;
} else {
// Neighbor block is translation-only
return 4;
}
}
}
// Get the position of back-up WARP_EXTED mode base.
int get_extend_base_pos(const AV1_COMMON *cm, const MACROBLOCKD *xd,
const MB_MODE_INFO *mbmi, int mvp_row_offset,
int mvp_col_offset, POSITION *base_pos);
#endif // CONFIG_EXTENDED_WARP_PREDICTION
#if CONFIG_WARP_REF_LIST
void av1_find_warp_delta_base_candidates(
const MACROBLOCKD *xd, const MB_MODE_INFO *mbmi,
WARP_CANDIDATE warp_param_stack[MAX_WARP_REF_CANDIDATES],
WARP_CANDIDATE spatial_candidates[MAX_WARP_REF_CANDIDATES],
uint8_t num_wrl_cand, uint8_t *p_valid_num_candidates);
#endif // CONFIG_WARP_REF_LIST
#if CONFIG_WARPMV
bool is_warp_candidate_inside_of_frame(const AV1_COMMON *cm,
const MACROBLOCKD *xd, int_mv cand_mv);
int16_t inter_warpmv_mode_ctx(const AV1_COMMON *cm, const MACROBLOCKD *xd,
const MB_MODE_INFO *mbmi);
#endif // CONFIG_WARPMV
static INLINE int is_ref_motion_field_eligible(
const AV1_COMMON *const cm, const RefCntBuffer *const start_frame_buf) {
if (start_frame_buf == NULL) return 0;
if (start_frame_buf->frame_type == KEY_FRAME ||
start_frame_buf->frame_type == INTRA_ONLY_FRAME)
return 0;
if (start_frame_buf->mi_rows != cm->mi_params.mi_rows ||
start_frame_buf->mi_cols != cm->mi_params.mi_cols)
return 0;
return 1;
}
#ifdef __cplusplus
} // extern "C"
#endif
#endif // AOM_AV1_COMMON_MVREF_COMMON_H_