| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 3-Clause Clear License |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear |
| * License was not distributed with this source code in the LICENSE file, you |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the |
| * Alliance for Open Media Patent License 1.0 was not distributed with this |
| * source code in the PATENTS file, you can obtain it at |
| * aomedia.org/license/patent-license/. |
| */ |
| |
| #include <stdint.h> |
| |
| #include "config/aom_config.h" |
| #include "config/aom_scale_rtcd.h" |
| |
| #include "aom/aom_codec.h" |
| #include "aom/aom_encoder.h" |
| |
| #include "aom_ports/system_state.h" |
| |
| #if CONFIG_MISMATCH_DEBUG |
| #include "aom_util/debug_util.h" |
| #endif // CONFIG_MISMATCH_DEBUG |
| |
| #include "av1/common/av1_common_int.h" |
| #include "av1/common/reconinter.h" |
| |
| #include "av1/encoder/encoder.h" |
| #include "av1/encoder/encode_strategy.h" |
| #include "av1/encoder/encodeframe.h" |
| #include "av1/encoder/firstpass.h" |
| #include "av1/encoder/pass2_strategy.h" |
| #include "av1/encoder/temporal_filter.h" |
| #include "av1/encoder/tpl_model.h" |
| #include "av1/encoder/encoder_utils.h" |
| |
| #if CONFIG_TUNE_VMAF |
| #include "av1/encoder/tune_vmaf.h" |
| #endif |
| |
| #define TEMPORAL_FILTER_KEY_FRAME 1 |
| |
| // Get the subgop config corresponding to the current frame within the |
| // gf group |
| const SubGOPStepCfg *get_subgop_step(const GF_GROUP *const gf_group, |
| int index) { |
| const SubGOPCfg *subgop_cfg = gf_group->subgop_cfg; |
| if (subgop_cfg == NULL) return NULL; |
| const int is_first_gop = (gf_group->update_type[0] == KF_UPDATE); |
| const int offset = |
| gf_group->has_overlay_for_key_frame ? 2 : (is_first_gop ? 1 : 0); |
| return &subgop_cfg->step[index - offset]; |
| } |
| |
| void av1_get_ref_frames_enc(AV1_COMMON *cm, int cur_frame_disp, |
| RefFrameMapPair *ref_frame_map_pairs) { |
| assert(cm->seq_params.explicit_ref_frame_map); |
| // With explicit_ref_frame_map on, an encoder-only ranking scheme can be |
| // implemented here. For now, av1_get_ref_frames is used as a placeholder. |
| av1_get_ref_frames(cm, cur_frame_disp, ref_frame_map_pairs); |
| } |
| |
| void av1_configure_buffer_updates(AV1_COMP *const cpi, |
| const FRAME_UPDATE_TYPE type) { |
| // NOTE(weitinglin): Should we define another function to take care of |
| // cpi->rc.is_$Source_Type to make this function as it is in the comment? |
| |
| cpi->rc.is_src_frame_alt_ref = 0; |
| |
| switch (type) { |
| case OVERLAY_UPDATE: |
| case KFFLT_OVERLAY_UPDATE: |
| case INTNL_OVERLAY_UPDATE: cpi->rc.is_src_frame_alt_ref = 1; break; |
| |
| case KF_UPDATE: |
| case LF_UPDATE: |
| case GF_UPDATE: |
| case ARF_UPDATE: |
| case KFFLT_UPDATE: |
| case INTNL_ARF_UPDATE: break; |
| |
| default: assert(0); break; |
| } |
| } |
| |
| static void set_additional_frame_flags(const AV1_COMMON *const cm, |
| unsigned int *const frame_flags) { |
| if (frame_is_intra_only(cm)) { |
| *frame_flags |= FRAMEFLAGS_INTRAONLY; |
| } |
| if (frame_is_sframe(cm)) { |
| *frame_flags |= FRAMEFLAGS_SWITCH; |
| } |
| if (cm->features.error_resilient_mode) { |
| *frame_flags |= FRAMEFLAGS_ERROR_RESILIENT; |
| } |
| if (cm->film_grain_params.apply_grain) { |
| *frame_flags |= FRAMEFLAGS_HAS_FILM_GRAIN_PARAMS; |
| } |
| } |
| |
| static INLINE void update_keyframe_counters(AV1_COMP *cpi) { |
| if (cpi->common.show_frame) { |
| cpi->rc.frames_since_key++; |
| cpi->rc.frames_to_key--; |
| } |
| } |
| |
| static INLINE int is_frame_droppable( |
| const ExtRefreshFrameFlagsInfo *const ext_refresh_frame_flags) { |
| // Droppable frame is only used by external refresh flags. VoD setting won't |
| // trigger its use case. |
| if (ext_refresh_frame_flags->update_pending) |
| return ext_refresh_frame_flags->all_ref_frames == 0; |
| else |
| return 0; |
| } |
| |
| static INLINE void update_frames_till_gf_update(AV1_COMP *cpi) { |
| // TODO(weitinglin): Updating this counter for is_frame_droppable |
| // is a work-around to handle the condition when a frame is drop. |
| // We should fix the cpi->common.show_frame flag |
| // instead of checking the other condition to update the counter properly. |
| if (cpi->common.show_frame || |
| is_frame_droppable(&cpi->ext_flags.refresh_frame)) { |
| // Decrement count down till next gf |
| if (cpi->rc.frames_till_gf_update_due > 0) |
| cpi->rc.frames_till_gf_update_due--; |
| } |
| } |
| |
| static INLINE void update_gf_group_index(AV1_COMP *cpi) { |
| // Increment the gf group index ready for the next frame. If this is |
| // a show_existing_frame with a source other than altref, or if it is not |
| // a displayed forward keyframe, the index was incremented when it was |
| // originally encoded. |
| if (!cpi->common.show_existing_frame || cpi->rc.is_src_frame_alt_ref || |
| cpi->common.current_frame.frame_type == KEY_FRAME) { |
| ++cpi->gf_group.index; |
| } |
| } |
| |
| // Update show_existing_frame flag for frames of type OVERLAY_UPDATE in the |
| // current GF interval |
| static INLINE void set_show_existing_alt_ref(GF_GROUP *const gf_group, |
| int apply_filtering, |
| int enable_overlay, |
| int show_existing_alt_ref) { |
| if (get_frame_update_type(gf_group) != ARF_UPDATE && |
| get_frame_update_type(gf_group) != KFFLT_UPDATE) |
| return; |
| if (!enable_overlay) |
| gf_group->show_existing_alt_ref = 1; |
| else |
| gf_group->show_existing_alt_ref = |
| apply_filtering ? show_existing_alt_ref : 1; |
| } |
| |
| static void update_rc_counts(AV1_COMP *cpi) { |
| update_keyframe_counters(cpi); |
| update_frames_till_gf_update(cpi); |
| update_gf_group_index(cpi); |
| } |
| |
| static void set_ext_overrides(AV1_COMMON *const cm, |
| EncodeFrameParams *const frame_params, |
| ExternalFlags *const ext_flags) { |
| // Overrides the defaults with the externally supplied values with |
| // av1_update_reference() and av1_update_entropy() calls |
| // Note: The overrides are valid only for the next frame passed |
| // to av1_encode_lowlevel() |
| |
| if (ext_flags->use_s_frame) { |
| frame_params->frame_type = S_FRAME; |
| } |
| |
| if (ext_flags->refresh_frame_context_pending) { |
| cm->features.refresh_frame_context = ext_flags->refresh_frame_context; |
| ext_flags->refresh_frame_context_pending = 0; |
| } |
| cm->features.allow_ref_frame_mvs = ext_flags->use_ref_frame_mvs; |
| |
| frame_params->error_resilient_mode = ext_flags->use_error_resilient; |
| // A keyframe is already error resilient and keyframes with |
| // error_resilient_mode interferes with the use of show_existing_frame |
| // when forward reference keyframes are enabled. |
| frame_params->error_resilient_mode &= frame_params->frame_type != KEY_FRAME; |
| // For bitstream conformance, s-frames must be error-resilient |
| frame_params->error_resilient_mode |= frame_params->frame_type == S_FRAME; |
| } |
| |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT |
| static int get_current_frame_ref_type( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params) { |
| // We choose the reference "type" of this frame from the flags which indicate |
| // which reference frames will be refreshed by it. More than one of these |
| // flags may be set, so the order here implies an order of precedence. This is |
| // just used to choose the primary_ref_frame (as the most recent reference |
| // buffer of the same reference-type as the current frame) |
| |
| (void)frame_params; |
| // TODO(jingning): This table should be a lot simpler with the new |
| // ARF system in place. Keep frame_params for the time being as we are |
| // still evaluating a few design options. |
| switch (cpi->gf_group.layer_depth[cpi->gf_group.index]) { |
| case 0: return 0; |
| case 1: return 1; |
| case MAX_ARF_LAYERS: |
| case MAX_ARF_LAYERS + 1: return 4; |
| default: return 7; |
| } |
| } |
| |
| static int choose_primary_ref_frame( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params) { |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| const int intra_only = frame_params->frame_type == KEY_FRAME || |
| frame_params->frame_type == INTRA_ONLY_FRAME; |
| if (intra_only || frame_params->error_resilient_mode || |
| cpi->ext_flags.use_primary_ref_none) { |
| return PRIMARY_REF_NONE; |
| } |
| |
| // In large scale case, always use Last frame's frame contexts. |
| // Note(yunqing): In other cases, primary_ref_frame is chosen based on |
| // cpi->gf_group.layer_depth[cpi->gf_group.index], which also controls |
| // frame bit allocation. |
| if (cm->tiles.large_scale) return 0; |
| |
| // Find the most recent reference frame with the same reference type as the |
| // current frame |
| const int current_ref_type = get_current_frame_ref_type(cpi, frame_params); |
| int wanted_fb = cpi->fb_of_context_type[current_ref_type]; |
| |
| int primary_ref_frame = PRIMARY_REF_NONE; |
| const int n_refs = cm->ref_frames_info.num_total_refs; |
| for (int ref_frame = 0; ref_frame < n_refs; ref_frame++) { |
| if (get_ref_frame_map_idx(cm, ref_frame) == wanted_fb) { |
| primary_ref_frame = ref_frame; |
| } |
| } |
| |
| return primary_ref_frame; |
| } |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| // Map the subgop cfg reference list to actual reference buffers. Disable |
| // any reference frames that are not listed in the sub gop. |
| static void get_gop_cfg_enabled_refs(AV1_COMP *const cpi, int *ref_frame_flags, |
| int order_offset) { |
| GF_GROUP gf_group = cpi->gf_group; |
| // The current display index stored has not yet been updated. We must add |
| // The order offset to get the correct value here. |
| const int cur_frame_disp = |
| cpi->common.current_frame.frame_number + order_offset; |
| |
| const SubGOPStepCfg *step_gop_cfg = |
| get_subgop_step(&gf_group, gf_group.index); |
| assert(step_gop_cfg != NULL); |
| // No references specified |
| if (step_gop_cfg->num_references < 0) return; |
| |
| // Mask to indicate whether or not each ref is allowed by the GOP config |
| int ref_frame_used[INTER_REFS_PER_FRAME] = { 0 }; |
| // Structures to hash each reference frame based on its pyramid level. This |
| // will allow us to match the pyramid levels specified in the cfg to the best |
| // reference frame index. |
| int n_references[MAX_ARF_LAYERS + 1] = { 0 }; |
| int references[MAX_ARF_LAYERS + 1][INTER_REFS_PER_FRAME] = { { 0 } }; |
| int disp_orders[MAX_ARF_LAYERS + 1][INTER_REFS_PER_FRAME] = { { 0 } }; |
| |
| int frame_level = -1; |
| // Loop over each reference frame and hash it based on its pyramid level |
| for (int frame = 0; frame < INTER_REFS_PER_FRAME; frame++) { |
| // Get reference frame buffer |
| const RefCntBuffer *const buf = get_ref_frame_buf(&cpi->common, frame); |
| if (buf == NULL) continue; |
| const int frame_order = (int)buf->display_order_hint; |
| frame_level = buf->pyramid_level; |
| |
| // Sometimes a frame index is in multiple reference buffers. |
| // Do not add a frame to the pyramid list multiple times. |
| int found = 0; |
| for (int r = 0; r < n_references[frame_level]; r++) { |
| if (frame_order == disp_orders[frame_level][r]) { |
| found = 1; |
| break; |
| } |
| } |
| // If this is an unseen frame, map its display order and ref buffer |
| // index to its level in the pyramid |
| if (!found) { |
| int n_refs = n_references[frame_level]++; |
| disp_orders[frame_level][n_refs] = frame_order; |
| references[frame_level][n_refs] = frame; |
| } |
| } |
| |
| // For each reference specified in the step_gop_cfg, map it to a reference |
| // buffer based on pyramid level if possible. |
| for (int i = 0; i < step_gop_cfg->num_references; i++) { |
| const int level = step_gop_cfg->references[i]; |
| const int abs_level = abs(level); |
| int best_frame = -1; |
| int best_frame_index = -1; |
| int best_disp_order = INT_MAX; |
| for (int ref = 0; ref < n_references[abs_level]; ref++) { |
| const int disp_order = disp_orders[abs_level][ref]; |
| const int cur_order_diff = cur_frame_disp - disp_order; |
| // This frame has already been used |
| if (disp_order < 0) continue; |
| // This frame is in the wrong direction |
| if ((cur_order_diff < 0) != (level < 0)) continue; |
| // Store this frame if it is the closest in display order to the current |
| // frame so far |
| if (abs(cur_order_diff) < abs(best_disp_order - cur_frame_disp)) { |
| best_frame = references[abs_level][ref]; |
| best_frame_index = ref; |
| best_disp_order = disp_order; |
| } |
| } |
| update_subgop_ref_stats(&cpi->subgop_stats, |
| cpi->oxcf.unit_test_cfg.enable_subgop_stats, i, |
| (best_frame < 0) ? 0 : 1, level, best_disp_order, |
| (int)step_gop_cfg->num_references); |
| if (best_frame == -1) { |
| if (cpi->print_per_frame_stats) { |
| fprintf(stderr, |
| "Warning [Subgop cfg]: " |
| "Level %d ref for frame %d not found\n", |
| level, step_gop_cfg->disp_frame_idx); |
| } |
| } else { |
| ref_frame_used[best_frame] = 1; |
| disp_orders[abs_level][best_frame_index] = -1; |
| } |
| } |
| |
| // Avoid using references that were not specified by the cfg |
| for (int frame = 0; frame < INTER_REFS_PER_FRAME; frame++) |
| if (!ref_frame_used[frame]) *ref_frame_flags &= ~(1 << (frame)); |
| } |
| |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT |
| static void update_fb_of_context_type( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params, |
| int *const fb_of_context_type) { |
| const AV1_COMMON *const cm = &cpi->common; |
| const int current_frame_ref_type = |
| get_current_frame_ref_type(cpi, frame_params); |
| |
| const int golden_frame = cm->ref_frames_info.past_refs[0]; |
| const int altref_frame = get_furthest_future_ref_index(cm); |
| if (frame_is_intra_only(cm) || cm->features.error_resilient_mode || |
| cpi->ext_flags.use_primary_ref_none) { |
| for (int i = 0; i < REF_FRAMES; i++) { |
| fb_of_context_type[i] = -1; |
| } |
| fb_of_context_type[current_frame_ref_type] = |
| cm->show_frame ? get_ref_frame_map_idx(cm, golden_frame) |
| : get_ref_frame_map_idx(cm, altref_frame); |
| } |
| |
| if (!encode_show_existing_frame(cm)) { |
| // Refresh fb_of_context_type[]: see encoder.h for explanation |
| if (cm->current_frame.frame_type == KEY_FRAME) { |
| // All ref frames are refreshed, pick one that will live long enough |
| fb_of_context_type[current_frame_ref_type] = 0; |
| } else { |
| // If more than one frame is refreshed, it doesn't matter which one we |
| // pick so pick the first. LST sometimes doesn't refresh any: this is ok |
| |
| for (int i = 0; i < REF_FRAMES; i++) { |
| if (cm->current_frame.refresh_frame_flags & (1 << i)) { |
| fb_of_context_type[current_frame_ref_type] = i; |
| break; |
| } |
| } |
| } |
| } |
| } |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| static void adjust_frame_rate(AV1_COMP *cpi, int64_t ts_start, int64_t ts_end) { |
| TimeStamps *time_stamps = &cpi->time_stamps; |
| int64_t this_duration; |
| int step = 0; |
| |
| // Clear down mmx registers |
| aom_clear_system_state(); |
| |
| if (ts_start == time_stamps->first_ever) { |
| this_duration = ts_end - ts_start; |
| step = 1; |
| } else { |
| int64_t last_duration = |
| time_stamps->prev_end_seen - time_stamps->prev_start_seen; |
| |
| this_duration = ts_end - time_stamps->prev_end_seen; |
| |
| // do a step update if the duration changes by 10% |
| if (last_duration) |
| step = (int)((this_duration - last_duration) * 10 / last_duration); |
| } |
| |
| if (this_duration) { |
| if (step) { |
| av1_new_framerate(cpi, 10000000.0 / this_duration); |
| } else { |
| // Average this frame's rate into the last second's average |
| // frame rate. If we haven't seen 1 second yet, then average |
| // over the whole interval seen. |
| const double interval = |
| AOMMIN((double)(ts_end - time_stamps->first_ever), 10000000.0); |
| double avg_duration = 10000000.0 / cpi->framerate; |
| avg_duration *= (interval - avg_duration + this_duration); |
| avg_duration /= interval; |
| |
| av1_new_framerate(cpi, 10000000.0 / avg_duration); |
| } |
| } |
| time_stamps->prev_start_seen = ts_start; |
| time_stamps->prev_end_seen = ts_end; |
| } |
| |
| // Determine whether there is a forced keyframe pending in the lookahead buffer |
| int get_forced_keyframe_position(struct lookahead_ctx *lookahead, |
| const int up_to_index, |
| const COMPRESSOR_STAGE compressor_stage) { |
| /* If the forced kf is not available or if the current frame is |
| * forced kf, then return -1. Else return the position of the |
| * forced kf. |
| */ |
| for (int i = 0; i <= up_to_index; i++) { |
| const struct lookahead_entry *e = |
| av1_lookahead_peek(lookahead, i, compressor_stage); |
| if (e == NULL) { |
| // We have reached the end of the lookahead buffer and not early-returned |
| // so there isn't a forced key-frame pending. |
| return -1; |
| } else if (e->flags == AOM_EFLAG_FORCE_KF) { |
| return (i > 0) ? i : -1; |
| } else { |
| continue; |
| } |
| } |
| return -1; // Never reached |
| } |
| |
| // Check if we should encode an ARF or internal ARF. If not, try a LAST |
| // Do some setup associated with the chosen source |
| // temporal_filtered, flush, and frame_update_type are outputs. |
| // Return the frame source, or NULL if we couldn't find one |
| static struct lookahead_entry *choose_frame_source( |
| AV1_COMP *const cpi, int *const flush, struct lookahead_entry **last_source, |
| EncodeFrameParams *const frame_params) { |
| AV1_COMMON *const cm = &cpi->common; |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| struct lookahead_entry *source = NULL; |
| |
| // Source index in lookahead buffer. |
| int src_index = gf_group->arf_src_offset[gf_group->index]; |
| |
| // TODO(Aasaipriya): Forced key frames need to be fixed when rc_mode != AOM_Q |
| if (src_index && |
| (get_forced_keyframe_position(cpi->lookahead, src_index, |
| cpi->compressor_stage) != -1) && |
| cpi->oxcf.rc_cfg.mode != AOM_Q) { |
| src_index = 0; |
| *flush = 1; |
| } |
| |
| // If the current frame is arf, then we should not pop from the lookahead |
| // buffer. If the current frame is not arf, then pop it. This assumes the |
| // first frame in the GF group is not arf. May need to change if it is not |
| // true. |
| int pop_lookahead = (src_index == 0); |
| // If this is a key frame and keyframe filtering is enabled with overlay, |
| // then do not pop. |
| if (pop_lookahead && cpi->oxcf.kf_cfg.enable_keyframe_filtering > 1 && |
| cpi->rc.frames_to_key == 0 && cpi->rc.frames_till_gf_update_due == 0 && |
| !is_stat_generation_stage(cpi) && cpi->lookahead) { |
| if (cpi->lookahead->read_ctxs[cpi->compressor_stage].sz && |
| (*flush || |
| cpi->lookahead->read_ctxs[cpi->compressor_stage].sz == |
| cpi->lookahead->read_ctxs[cpi->compressor_stage].pop_sz)) { |
| pop_lookahead = 0; |
| } |
| } |
| frame_params->show_frame = pop_lookahead; |
| if (pop_lookahead) { |
| // show frame, pop from buffer |
| // Get last frame source. |
| if (cm->current_frame.frame_number > 0) { |
| *last_source = |
| av1_lookahead_peek(cpi->lookahead, -1, cpi->compressor_stage); |
| } |
| // Read in the source frame. |
| source = av1_lookahead_pop(cpi->lookahead, *flush, cpi->compressor_stage); |
| } else { |
| // no show frames are arf frames |
| source = |
| av1_lookahead_peek(cpi->lookahead, src_index, cpi->compressor_stage); |
| if (source != NULL) { |
| cm->showable_frame = 1; |
| } |
| } |
| return source; |
| } |
| |
| // Don't allow a show_existing_frame to coincide with an error resilient or |
| // S-Frame. An exception can be made in the case of a keyframe, since it does |
| // not depend on any previous frames. |
| static int allow_show_existing(const AV1_COMP *const cpi, |
| unsigned int frame_flags) { |
| if (cpi->common.current_frame.frame_number == 0) return 0; |
| |
| const struct lookahead_entry *lookahead_src = |
| av1_lookahead_peek(cpi->lookahead, 0, cpi->compressor_stage); |
| if (lookahead_src == NULL) return 1; |
| |
| const int is_error_resilient = |
| cpi->oxcf.tool_cfg.error_resilient_mode || |
| (lookahead_src->flags & AOM_EFLAG_ERROR_RESILIENT); |
| const int is_s_frame = cpi->oxcf.kf_cfg.enable_sframe || |
| (lookahead_src->flags & AOM_EFLAG_SET_S_FRAME); |
| const int is_key_frame = |
| (cpi->rc.frames_to_key == 0) || (frame_flags & FRAMEFLAGS_KEY); |
| return !(is_error_resilient || is_s_frame) || is_key_frame; |
| } |
| |
| // Update frame_flags to tell the encoder's caller what sort of frame was |
| // encoded. |
| static void update_frame_flags(const AV1_COMMON *const cm, |
| unsigned int *frame_flags) { |
| if (encode_show_existing_frame(cm)) { |
| *frame_flags &= ~FRAMEFLAGS_KEY; |
| return; |
| } |
| |
| if (cm->current_frame.frame_type == KEY_FRAME) { |
| *frame_flags |= FRAMEFLAGS_KEY; |
| } else { |
| *frame_flags &= ~FRAMEFLAGS_KEY; |
| } |
| } |
| |
| #define DUMP_REF_FRAME_IMAGES 0 |
| |
| #if DUMP_REF_FRAME_IMAGES == 1 |
| static int dump_one_image(AV1_COMMON *cm, |
| const YV12_BUFFER_CONFIG *const ref_buf, |
| char *file_name) { |
| int h; |
| FILE *f_ref = NULL; |
| |
| if (ref_buf == NULL) { |
| printf("Frame data buffer is NULL.\n"); |
| return AOM_CODEC_MEM_ERROR; |
| } |
| |
| if ((f_ref = fopen(file_name, "wb")) == NULL) { |
| printf("Unable to open file %s to write.\n", file_name); |
| return AOM_CODEC_MEM_ERROR; |
| } |
| |
| // --- Y --- |
| for (h = 0; h < cm->height; ++h) { |
| fwrite(&ref_buf->y_buffer[h * ref_buf->y_stride], 1, cm->width, f_ref); |
| } |
| // --- U --- |
| for (h = 0; h < (cm->height >> 1); ++h) { |
| fwrite(&ref_buf->u_buffer[h * ref_buf->uv_stride], 1, (cm->width >> 1), |
| f_ref); |
| } |
| // --- V --- |
| for (h = 0; h < (cm->height >> 1); ++h) { |
| fwrite(&ref_buf->v_buffer[h * ref_buf->uv_stride], 1, (cm->width >> 1), |
| f_ref); |
| } |
| |
| fclose(f_ref); |
| |
| return AOM_CODEC_OK; |
| } |
| |
| static void dump_ref_frame_images(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| MV_REFERENCE_FRAME ref_frame; |
| |
| for (ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ++ref_frame) { |
| char file_name[256] = ""; |
| snprintf(file_name, sizeof(file_name), "/tmp/enc_F%d_ref_%d.yuv", |
| cm->current_frame.frame_number, ref_frame); |
| dump_one_image(cm, get_ref_frame_yv12_buf(cpi, ref_frame), file_name); |
| } |
| } |
| #endif // DUMP_REF_FRAME_IMAGES == 1 |
| |
| int av1_get_refresh_ref_frame_map(AV1_COMMON *cm, int refresh_frame_flags) { |
| (void)cm; |
| int ref_map_index = INVALID_IDX; |
| |
| for (ref_map_index = 0; ref_map_index < REF_FRAMES; ++ref_map_index) { |
| if ((refresh_frame_flags >> ref_map_index) & 1) break; |
| } |
| |
| return ref_map_index; |
| } |
| |
| int use_subgop_cfg(const GF_GROUP *const gf_group, int gf_index) { |
| if (gf_index < 0) return 0; |
| if (gf_group->subgop_cfg == NULL) return 0; |
| if (gf_index == 1) return !gf_group->has_overlay_for_key_frame; |
| return 1; |
| } |
| |
| static int get_free_ref_map_index(RefFrameMapPair ref_map_pairs[REF_FRAMES]) { |
| for (int idx = 0; idx < REF_FRAMES; ++idx) |
| if (ref_map_pairs[idx].disp_order == -1) return idx; |
| return INVALID_IDX; |
| } |
| |
| static int get_refresh_idx(int update_arf, int refresh_level, |
| int cur_frame_disp, |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]) { |
| int arf_count = 0; |
| int oldest_arf_order = INT32_MAX; |
| int oldest_arf_idx = -1; |
| |
| int oldest_frame_order = INT32_MAX; |
| int oldest_idx = -1; |
| |
| int oldest_ref_level_order = INT32_MAX; |
| int oldest_ref_level_idx = -1; |
| |
| for (int map_idx = 0; map_idx < REF_FRAMES; map_idx++) { |
| RefFrameMapPair ref_pair = ref_frame_map_pairs[map_idx]; |
| if (ref_pair.disp_order == -1) continue; |
| const int frame_order = ref_pair.disp_order; |
| const int reference_frame_level = ref_pair.pyr_level; |
| // Keep future frames and three closest previous frames in output order |
| if (frame_order > cur_frame_disp - 3) continue; |
| |
| // Keep track of the oldest reference frame matching the specified |
| // refresh level from the subgop cfg |
| if (refresh_level > 0 && refresh_level == reference_frame_level) { |
| if (frame_order < oldest_ref_level_order) { |
| oldest_ref_level_order = frame_order; |
| oldest_ref_level_idx = map_idx; |
| } |
| } |
| |
| // Keep track of the oldest level 1 frame if the current frame is level also |
| // 1 |
| if (reference_frame_level == 1) { |
| // If there are more than 2 level 1 frames in the reference list, |
| // discard the oldest |
| if (frame_order < oldest_arf_order) { |
| oldest_arf_order = frame_order; |
| oldest_arf_idx = map_idx; |
| } |
| arf_count++; |
| continue; |
| } |
| |
| // Update the overall oldest reference frame |
| if (frame_order < oldest_frame_order) { |
| oldest_frame_order = frame_order; |
| oldest_idx = map_idx; |
| } |
| } |
| if (oldest_ref_level_idx > -1) return oldest_ref_level_idx; |
| if (update_arf && arf_count > 2) return oldest_arf_idx; |
| if (oldest_idx >= 0) return oldest_idx; |
| if (oldest_arf_idx >= 0) return oldest_arf_idx; |
| assert(0 && "No valid refresh index found"); |
| return -1; |
| } |
| |
| static int get_refresh_frame_flags_subgop_cfg( |
| const AV1_COMP *const cpi, int gf_index, int cur_disp_order, |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES], int refresh_mask, |
| int free_fb_index) { |
| const SubGOPStepCfg *step_gop_cfg = get_subgop_step(&cpi->gf_group, gf_index); |
| assert(step_gop_cfg != NULL); |
| const int pyr_level = step_gop_cfg->pyr_level; |
| const FRAME_TYPE_CODE type_code = step_gop_cfg->type_code; |
| const int refresh_level = step_gop_cfg->refresh; |
| if (refresh_level == 0) return 0; |
| |
| // No refresh necessary for these frame types |
| if (type_code == FRAME_TYPE_INO_REPEAT || |
| type_code == FRAME_TYPE_INO_SHOWEXISTING) |
| return refresh_mask; |
| // If there is an open slot, refresh that one instead of replacing a reference |
| if (free_fb_index != INVALID_IDX) { |
| refresh_mask = 1 << free_fb_index; |
| return refresh_mask; |
| } |
| |
| const int update_arf = type_code == FRAME_TYPE_OOO_FILTERED && pyr_level == 1; |
| const int refresh_idx = get_refresh_idx(update_arf, refresh_level, |
| cur_disp_order, ref_frame_map_pairs); |
| return 1 << refresh_idx; |
| } |
| |
| int av1_get_refresh_frame_flags( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params, |
| FRAME_UPDATE_TYPE frame_update_type, int gf_index, int cur_disp_order, |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]) { |
| // Switch frames and shown key-frames overwrite all reference slots |
| if ((frame_params->frame_type == KEY_FRAME && !cpi->no_show_fwd_kf) || |
| frame_params->frame_type == S_FRAME) { |
| return REFRESH_FRAME_ALL; |
| } |
| |
| // show_existing_frames don't actually send refresh_frame_flags so set the |
| // flags to 0 to keep things consistent. |
| if (frame_params->show_existing_frame && |
| (!frame_params->error_resilient_mode || |
| frame_params->frame_type == KEY_FRAME)) { |
| return 0; |
| } |
| |
| int refresh_mask = 0; |
| const ExtRefreshFrameFlagsInfo *const ext_refresh_frame_flags = |
| &cpi->ext_flags.refresh_frame; |
| |
| if (is_frame_droppable(ext_refresh_frame_flags)) return 0; |
| |
| if (ext_refresh_frame_flags->update_pending) { |
| return refresh_mask; |
| } |
| |
| // Search for the open slot to store the current frame. |
| int free_fb_index = get_free_ref_map_index(ref_frame_map_pairs); |
| |
| if (use_subgop_cfg(&cpi->gf_group, gf_index)) { |
| const int mask = get_refresh_frame_flags_subgop_cfg( |
| cpi, gf_index, cur_disp_order, ref_frame_map_pairs, refresh_mask, |
| free_fb_index); |
| return mask; |
| } |
| |
| // No refresh necessary for these frame types |
| if (frame_update_type == OVERLAY_UPDATE || |
| frame_update_type == KFFLT_OVERLAY_UPDATE || |
| frame_update_type == INTNL_OVERLAY_UPDATE) { |
| return refresh_mask; |
| } |
| |
| // If there is an open slot, refresh that one instead of replacing a reference |
| if (free_fb_index != INVALID_IDX) { |
| return 1 << free_fb_index; |
| } |
| |
| const int update_arf = frame_update_type == ARF_UPDATE; |
| const int refresh_idx = |
| get_refresh_idx(update_arf, -1, cur_disp_order, ref_frame_map_pairs); |
| return 1 << refresh_idx; |
| } |
| |
| void setup_mi(AV1_COMP *const cpi, YV12_BUFFER_CONFIG *src) { |
| AV1_COMMON *const cm = &cpi->common; |
| const int num_planes = av1_num_planes(cm); |
| MACROBLOCK *const x = &cpi->td.mb; |
| MACROBLOCKD *const xd = &x->e_mbd; |
| |
| av1_setup_src_planes(x, src, 0, 0, num_planes, NULL); |
| |
| av1_setup_block_planes(xd, cm->seq_params.subsampling_x, |
| cm->seq_params.subsampling_y, num_planes); |
| |
| set_mi_offsets(&cm->mi_params, xd, 0, 0 |
| #if CONFIG_C071_SUBBLK_WARPMV |
| , |
| 0, 0 |
| #endif // CONFIG_C071_SUBBLK_WARPMV |
| ); |
| } |
| |
| // Apply temporal filtering to source frames and encode the filtered frame. |
| // If the current frame does not require filtering, this function is identical |
| // to av1_encode() except that tpl is not performed. |
| static int denoise_and_encode(AV1_COMP *const cpi, uint8_t *const dest, |
| EncodeFrameInput *const frame_input, |
| EncodeFrameParams *const frame_params, |
| EncodeFrameResults *const frame_results) { |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| AV1_COMMON *const cm = &cpi->common; |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| |
| // Decide whether to apply temporal filtering to the source frame. |
| int apply_filtering = 0; |
| int arf_src_index = -1; |
| if (frame_params->frame_type == KEY_FRAME) { |
| // Decide whether it is allowed to perform key frame filtering |
| int allow_kf_filtering = |
| oxcf->kf_cfg.enable_keyframe_filtering && |
| !is_stat_generation_stage(cpi) && !frame_params->show_existing_frame && |
| cpi->rc.frames_to_key > cpi->oxcf.algo_cfg.arnr_max_frames && |
| !is_lossless_requested(&oxcf->rc_cfg) && |
| oxcf->algo_cfg.arnr_max_frames > 0; |
| if (allow_kf_filtering) { |
| const double y_noise_level = av1_estimate_noise_from_single_plane( |
| frame_input->source, 0, cm->seq_params.bit_depth); |
| apply_filtering = y_noise_level > 0; |
| } else { |
| apply_filtering = 0; |
| } |
| // If we are doing kf filtering, set up a few things. |
| if (apply_filtering) { |
| MACROBLOCKD *const xd = &cpi->td.mb.e_mbd; |
| av1_init_mi_buffers(&cm->mi_params); |
| setup_mi(cpi, frame_input->source); |
| av1_init_macroblockd(cm, xd); |
| memset(cpi->mbmi_ext_info.frame_base, 0, |
| cpi->mbmi_ext_info.alloc_size * |
| sizeof(*cpi->mbmi_ext_info.frame_base)); |
| |
| av1_set_speed_features_framesize_independent(cpi, oxcf->speed); |
| av1_set_speed_features_framesize_dependent(cpi, oxcf->speed); |
| av1_set_rd_speed_thresholds(cpi); |
| av1_setup_frame_buf_refs(cm); |
| av1_setup_frame_sign_bias(cm); |
| av1_frame_init_quantizer(cpi); |
| av1_setup_past_independence(cm); |
| |
| if (gf_group->update_type[gf_group->index] == KEY_FRAME && |
| !cpi->no_show_fwd_kf) |
| cm->current_frame.frame_number = 0; |
| |
| if (!frame_params->show_frame && cpi->no_show_fwd_kf) { |
| // fwd kf |
| arf_src_index = -1 * gf_group->arf_src_offset[gf_group->index]; |
| } else if (!frame_params->show_frame) { |
| arf_src_index = 0; |
| } else { |
| arf_src_index = -1; |
| } |
| } |
| } else if (get_frame_update_type(&cpi->gf_group) == ARF_UPDATE || |
| get_frame_update_type(&cpi->gf_group) == KFFLT_UPDATE || |
| get_frame_update_type(&cpi->gf_group) == INTNL_ARF_UPDATE) { |
| // ARF |
| apply_filtering = oxcf->algo_cfg.arnr_max_frames > 0; |
| if (gf_group->is_user_specified) { |
| apply_filtering &= gf_group->is_filtered[gf_group->index]; |
| } |
| if (apply_filtering) { |
| arf_src_index = gf_group->arf_src_offset[gf_group->index]; |
| } |
| } |
| // Save the pointer to the original source image. |
| YV12_BUFFER_CONFIG *source_buffer = frame_input->source; |
| // apply filtering to frame |
| int show_existing_alt_ref = 0; |
| if (apply_filtering) { |
| // TODO(bohanli): figure out why we need frame_type in cm here. |
| cm->current_frame.frame_type = frame_params->frame_type; |
| const int code_arf = |
| av1_temporal_filter(cpi, arf_src_index, &show_existing_alt_ref); |
| if (code_arf) { |
| aom_extend_frame_borders(&cpi->alt_ref_buffer, av1_num_planes(cm)); |
| frame_input->source = &cpi->alt_ref_buffer; |
| aom_copy_metadata_to_frame_buffer(frame_input->source, |
| source_buffer->metadata); |
| } |
| } |
| #if CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT && \ |
| !CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT_ENHANCEMENT |
| // when enable_frame_output_order == 1, show_existing mechanism is |
| // used for alt_ref in encoder side internally, but the OBU with |
| // show_existing_frame == 1 is not signaled in the bitstream. |
| if (cm->seq_params.enable_frame_output_order) show_existing_alt_ref = 1; |
| #endif // CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT && |
| // !CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT_ENHANCEMENT |
| set_show_existing_alt_ref(&cpi->gf_group, apply_filtering, |
| oxcf->algo_cfg.enable_overlay, |
| show_existing_alt_ref); |
| |
| // perform tpl after filtering |
| int allow_tpl = oxcf->gf_cfg.lag_in_frames > 1 && |
| !is_stat_generation_stage(cpi) && |
| oxcf->algo_cfg.enable_tpl_model; |
| if (frame_params->frame_type == KEY_FRAME) { |
| // Don't do tpl for fwd key frames |
| allow_tpl = allow_tpl && !cpi->sf.tpl_sf.disable_filtered_key_tpl && |
| !cpi->no_show_fwd_kf; |
| } else { |
| // Do tpl after ARF is filtered, or if no ARF, at the second frame of GF |
| // group. |
| // TODO(bohanli): if no ARF, just do it at the first frame. |
| int gf_index = gf_group->index; |
| allow_tpl = allow_tpl && (gf_group->update_type[gf_index] == ARF_UPDATE || |
| gf_group->update_type[gf_index] == GF_UPDATE); |
| if (allow_tpl) { |
| // Need to set the size for TPL for ARF |
| // TODO(bohanli): Why is this? what part of it is necessary? |
| av1_set_frame_size(cpi, cm->width, cm->height); |
| } |
| } |
| |
| if (gf_group->index == 0) av1_init_tpl_stats(&cpi->tpl_data); |
| if (allow_tpl) av1_tpl_setup_stats(cpi, 0, frame_params, frame_input); |
| |
| if (av1_encode(cpi, dest, frame_input, frame_params, frame_results) != |
| AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| |
| // Set frame_input source to true source for psnr calculation. |
| if (apply_filtering && is_psnr_calc_enabled(cpi)) { |
| cpi->source = |
| av1_scale_if_required(cm, source_buffer, &cpi->scaled_source, |
| cm->features.interp_filter, 0, false, true); |
| cpi->unscaled_source = source_buffer; |
| } |
| |
| return AOM_CODEC_OK; |
| } |
| |
| int av1_encode_strategy(AV1_COMP *const cpi, size_t *const size, |
| uint8_t *const dest, unsigned int *frame_flags, |
| int64_t *const time_stamp, int64_t *const time_end, |
| const aom_rational64_t *const timestamp_ratio, |
| int flush) { |
| AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| AV1_COMMON *const cm = &cpi->common; |
| GF_GROUP *gf_group = &cpi->gf_group; |
| ExternalFlags *const ext_flags = &cpi->ext_flags; |
| |
| EncodeFrameInput frame_input; |
| EncodeFrameParams frame_params; |
| EncodeFrameResults frame_results; |
| memset(&frame_input, 0, sizeof(frame_input)); |
| memset(&frame_params, 0, sizeof(frame_params)); |
| memset(&frame_results, 0, sizeof(frame_results)); |
| |
| // Check if we need to stuff more src frames |
| if (flush == 0) { |
| int srcbuf_size = |
| av1_lookahead_depth(cpi->lookahead, cpi->compressor_stage); |
| int pop_size = av1_lookahead_pop_sz(cpi->lookahead, cpi->compressor_stage); |
| |
| // Continue buffering look ahead buffer. |
| if (srcbuf_size < pop_size) return -1; |
| } |
| |
| if (!av1_lookahead_peek(cpi->lookahead, 0, cpi->compressor_stage)) { |
| if (flush && oxcf->pass == 1 && !cpi->twopass.first_pass_done) { |
| av1_end_first_pass(cpi); /* get last stats packet */ |
| cpi->twopass.first_pass_done = 1; |
| } |
| return -1; |
| } |
| |
| if (!is_stat_generation_stage(cpi)) { |
| // If this is a forward keyframe, mark as a show_existing_frame |
| // TODO(bohanli): find a consistent condition for fwd keyframes |
| if (oxcf->kf_cfg.fwd_kf_enabled && |
| (gf_group->index == (gf_group->size - 1)) && |
| (gf_group->update_type[gf_group->index] == OVERLAY_UPDATE || |
| gf_group->update_type[gf_group->index] == KFFLT_OVERLAY_UPDATE) && |
| gf_group->arf_index >= 0 && cpi->rc.frames_to_key == 0) { |
| frame_params.show_existing_frame = 1; |
| } else { |
| frame_params.show_existing_frame = |
| (gf_group->show_existing_alt_ref && |
| (gf_group->update_type[gf_group->index] == OVERLAY_UPDATE || |
| gf_group->update_type[gf_group->index] == KFFLT_OVERLAY_UPDATE)) || |
| gf_group->update_type[gf_group->index] == INTNL_OVERLAY_UPDATE; |
| } |
| frame_params.show_existing_frame &= allow_show_existing(cpi, *frame_flags); |
| |
| // Reset show_existing_alt_ref decision to 0 after it is used. |
| if (gf_group->update_type[gf_group->index] == OVERLAY_UPDATE || |
| gf_group->update_type[gf_group->index] == KFFLT_OVERLAY_UPDATE) { |
| gf_group->show_existing_alt_ref = 0; |
| } |
| } else { |
| frame_params.show_existing_frame = 0; |
| } |
| |
| if (!is_stat_generation_stage(cpi)) { |
| av1_get_second_pass_params(cpi, &frame_params); |
| } |
| |
| struct lookahead_entry *source = NULL; |
| struct lookahead_entry *last_source = NULL; |
| if (frame_params.show_existing_frame) { |
| source = av1_lookahead_pop(cpi->lookahead, flush, cpi->compressor_stage); |
| frame_params.show_frame = 1; |
| } else { |
| source = choose_frame_source(cpi, &flush, &last_source, &frame_params); |
| } |
| |
| if (source == NULL) { // If no source was found, we can't encode a frame. |
| if (flush && oxcf->pass == 1 && !cpi->twopass.first_pass_done) { |
| av1_end_first_pass(cpi); /* get last stats packet */ |
| cpi->twopass.first_pass_done = 1; |
| } |
| return -1; |
| } |
| // Source may be changed if temporal filtered later. |
| frame_input.source = &source->img; |
| frame_input.last_source = last_source != NULL ? &last_source->img : NULL; |
| frame_input.ts_duration = source->ts_end - source->ts_start; |
| // Save unfiltered source. It is used in av1_get_second_pass_params(). |
| cpi->unfiltered_source = frame_input.source; |
| |
| *time_stamp = source->ts_start; |
| *time_end = source->ts_end; |
| if (source->ts_start < cpi->time_stamps.first_ever) { |
| cpi->time_stamps.first_ever = source->ts_start; |
| cpi->time_stamps.prev_end_seen = source->ts_start; |
| } |
| |
| if (!is_stat_generation_stage(cpi) && |
| cpi->tpl_data.tpl_stats_pool[0] == NULL) { |
| setup_tpl_buffers(cm, &cpi->tpl_data, cpi->oxcf.algo_cfg.enable_tpl_model, |
| oxcf->gf_cfg.lag_in_frames); |
| } |
| |
| av1_apply_encoding_flags(cpi, source->flags); |
| if (!frame_params.show_existing_frame) |
| *frame_flags = (source->flags & AOM_EFLAG_FORCE_KF) ? FRAMEFLAGS_KEY : 0; |
| |
| // Shown frames and arf-overlay frames need frame-rate considering |
| if (frame_params.show_frame) |
| adjust_frame_rate(cpi, source->ts_start, source->ts_end); |
| |
| if (!frame_params.show_existing_frame) { |
| if (cpi->film_grain_table) { |
| cm->cur_frame->film_grain_params_present = aom_film_grain_table_lookup( |
| cpi->film_grain_table, *time_stamp, *time_end, 0 /* =erase */, |
| &cm->film_grain_params); |
| } else { |
| cm->cur_frame->film_grain_params_present = |
| cm->seq_params.film_grain_params_present; |
| } |
| // only one operating point supported now |
| const int64_t pts64 = ticks_to_timebase_units(timestamp_ratio, *time_stamp); |
| if (pts64 < 0 || pts64 > UINT32_MAX) return AOM_CODEC_ERROR; |
| cm->frame_presentation_time = (uint32_t)pts64; |
| } |
| |
| FRAME_UPDATE_TYPE frame_update_type = get_frame_update_type(gf_group); |
| |
| if (frame_params.show_existing_frame && |
| frame_params.frame_type != KEY_FRAME) { |
| // Force show-existing frames to be INTER, except forward keyframes |
| frame_params.frame_type = INTER_FRAME; |
| } |
| |
| // TODO(david.turner@argondesign.com): Move all the encode strategy |
| // (largely near av1_get_compressed_data) in here |
| |
| // TODO(david.turner@argondesign.com): Change all the encode strategy to |
| // modify frame_params instead of cm or cpi. |
| |
| // Per-frame encode speed. In theory this can vary, but things may have |
| // been written assuming speed-level will not change within a sequence, so |
| // this parameter should be used with caution. |
| frame_params.speed = oxcf->speed; |
| |
| // Work out some encoding parameters specific to the pass: |
| if (has_no_stats_stage(cpi) && oxcf->q_cfg.aq_mode == CYCLIC_REFRESH_AQ) { |
| av1_cyclic_refresh_update_parameters(cpi); |
| } else if (is_stat_generation_stage(cpi)) { |
| cpi->td.mb.e_mbd.lossless[0] = is_lossless_requested(&oxcf->rc_cfg); |
| const int kf_requested = (cm->current_frame.frame_number == 0 || |
| (*frame_flags & FRAMEFLAGS_KEY)); |
| if (kf_requested && frame_update_type != OVERLAY_UPDATE && |
| frame_update_type != KFFLT_OVERLAY_UPDATE && |
| frame_update_type != INTNL_OVERLAY_UPDATE) { |
| frame_params.frame_type = KEY_FRAME; |
| } else { |
| frame_params.frame_type = INTER_FRAME; |
| } |
| } else if (is_stat_consumption_stage(cpi)) { |
| #if CONFIG_MISMATCH_DEBUG |
| #if CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT |
| mismatch_move_frame_idx_w(!cm->seq_params.enable_frame_output_order || |
| !frame_params.show_existing_frame); |
| #else |
| mismatch_move_frame_idx_w(1); |
| #endif // CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT |
| #endif // CONFIG_MISMATCH_DEBUG |
| #if TXCOEFF_COST_TIMER |
| cm->txcoeff_cost_timer = 0; |
| cm->txcoeff_cost_count = 0; |
| #endif |
| } |
| |
| #if CONFIG_MISMATCH_DEBUG |
| if (has_no_stats_stage(cpi)) { |
| #if CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT |
| mismatch_move_frame_idx_w(!cm->seq_params.enable_frame_output_order || |
| !frame_params.show_existing_frame); |
| #else |
| mismatch_move_frame_idx_w(1); |
| #endif // CONFIG_OUTPUT_FRAME_BASED_ON_ORDER_HINT |
| } |
| #endif // CONFIG_MISMATCH_DEBUG |
| |
| if (!is_stat_generation_stage(cpi)) |
| set_ext_overrides(cm, &frame_params, ext_flags); |
| |
| // Shown keyframes and S frames refresh all reference buffers |
| const int force_refresh_all = |
| ((frame_params.frame_type == KEY_FRAME && frame_params.show_frame) || |
| frame_params.frame_type == S_FRAME) && |
| !frame_params.show_existing_frame; |
| |
| (void)force_refresh_all; |
| av1_configure_buffer_updates(cpi, frame_update_type); |
| |
| const int order_offset = gf_group->arf_src_offset[gf_group->index]; |
| const int cur_frame_disp = |
| cpi->common.current_frame.frame_number + order_offset; |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| init_ref_map_pair(&cpi->common, cm->ref_frame_map_pairs, |
| gf_group->update_type[gf_group->index] == KF_UPDATE); |
| #else |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]; |
| init_ref_map_pair(&cpi->common, ref_frame_map_pairs, |
| gf_group->update_type[gf_group->index] == KF_UPDATE); |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| if (!is_stat_generation_stage(cpi)) { |
| cm->current_frame.frame_type = frame_params.frame_type; |
| cm->features.error_resilient_mode = frame_params.error_resilient_mode; |
| |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| if (cm->seq_params.explicit_ref_frame_map) |
| av1_get_ref_frames_enc(cm, cur_frame_disp, cm->ref_frame_map_pairs); |
| else |
| av1_get_ref_frames(cm, cur_frame_disp, cm->ref_frame_map_pairs); |
| #else |
| if (cm->seq_params.explicit_ref_frame_map) |
| av1_get_ref_frames_enc(cm, cur_frame_disp, ref_frame_map_pairs); |
| else |
| av1_get_ref_frames(cm, cur_frame_disp, ref_frame_map_pairs); |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| #if CONFIG_ALLOW_SAME_REF_COMPOUND |
| cm->ref_frames_info.num_same_ref_compound = |
| AOMMIN(cm->seq_params.num_same_ref_compound, |
| cm->ref_frames_info.num_total_refs); |
| #endif // CONFIG_ALLOW_SAME_REF_COMPOUND |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| cm->cur_frame->num_ref_frames = cm->ref_frames_info.num_total_refs; |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| |
| // ref_frame_flags is defined based on the external flag |
| // max-reference-frames. |
| frame_params.ref_frame_flags = |
| (1 << cpi->common.ref_frames_info.num_total_refs) - 1; |
| |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT |
| frame_params.primary_ref_frame = |
| choose_primary_ref_frame(cpi, &frame_params); |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT |
| frame_params.order_offset = gf_group->arf_src_offset[gf_group->index]; |
| |
| if (!is_stat_generation_stage(cpi) && |
| use_subgop_cfg(&cpi->gf_group, cpi->gf_group.index) && |
| frame_update_type != KF_UPDATE) { |
| get_gop_cfg_enabled_refs(cpi, &frame_params.ref_frame_flags, |
| frame_params.order_offset); |
| } |
| |
| frame_params.refresh_frame_flags = av1_get_refresh_frame_flags( |
| cpi, &frame_params, frame_update_type, cpi->gf_group.index, |
| #if CONFIG_PRIMARY_REF_FRAME_OPT |
| cur_frame_disp, cm->ref_frame_map_pairs); |
| #else |
| cur_frame_disp, ref_frame_map_pairs); |
| #endif // CONFIG_PRIMARY_REF_FRAME_OPT |
| |
| frame_params.existing_fb_idx_to_show = INVALID_IDX; |
| // Find the frame buffer to show based on display order |
| if (frame_params.show_existing_frame) { |
| for (int frame = 0; frame < REF_FRAMES; frame++) { |
| const RefCntBuffer *const buf = cm->ref_frame_map[frame]; |
| if (buf == NULL) continue; |
| const int frame_order = (int)buf->display_order_hint; |
| if (frame_order == cur_frame_disp) |
| frame_params.existing_fb_idx_to_show = frame; |
| } |
| } |
| } |
| |
| // The way frame_params->remapped_ref_idx is setup is a placeholder. |
| // Currently, reference buffer assignment is done by update_ref_frame_map() |
| // which is called by high-level strategy AFTER encoding a frame. It |
| // modifies cm->remapped_ref_idx. If you want to use an alternative method |
| // to determine reference buffer assignment, just put your assignments into |
| // frame_params->remapped_ref_idx here and they will be used when encoding |
| // this frame. If frame_params->remapped_ref_idx is setup independently of |
| // cm->remapped_ref_idx then update_ref_frame_map() will have no effect. |
| memcpy(frame_params.remapped_ref_idx, cm->remapped_ref_idx, |
| REF_FRAMES * sizeof(*cm->remapped_ref_idx)); |
| |
| cpi->td.mb.delta_qindex = 0; |
| |
| if (!frame_params.show_existing_frame) { |
| cm->quant_params.using_qmatrix = oxcf->q_cfg.using_qm; |
| #if CONFIG_LR_IMPROVEMENTS |
| av1_set_lr_tools(cm->seq_params.lr_tools_disable_mask[0], 0, &cm->features); |
| av1_set_lr_tools(cm->seq_params.lr_tools_disable_mask[1], 1, &cm->features); |
| av1_set_lr_tools(cm->seq_params.lr_tools_disable_mask[1], 2, &cm->features); |
| #endif // CONFIG_LR_IMPROVEMENTS |
| } |
| if (denoise_and_encode(cpi, dest, &frame_input, &frame_params, |
| &frame_results) != AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| |
| if (!is_stat_generation_stage(cpi)) { |
| // First pass doesn't modify reference buffer assignment or produce frame |
| // flags |
| update_frame_flags(&cpi->common, frame_flags); |
| } |
| |
| if (!is_stat_generation_stage(cpi)) { |
| #if TXCOEFF_COST_TIMER |
| cm->cum_txcoeff_cost_timer += cm->txcoeff_cost_timer; |
| fprintf(stderr, |
| "\ntxb coeff cost block number: %ld, frame time: %ld, cum time %ld " |
| "in us\n", |
| cm->txcoeff_cost_count, cm->txcoeff_cost_timer, |
| cm->cum_txcoeff_cost_timer); |
| #endif |
| if (!has_no_stats_stage(cpi)) av1_twopass_postencode_update(cpi); |
| } |
| |
| #if CONFIG_TUNE_VMAF |
| if (!is_stat_generation_stage(cpi) && |
| (oxcf->tune_cfg.tuning >= AOM_TUNE_VMAF_WITH_PREPROCESSING && |
| oxcf->tune_cfg.tuning <= AOM_TUNE_VMAF_NEG_MAX_GAIN)) { |
| av1_update_vmaf_curve(cpi); |
| } |
| #endif |
| |
| if (!is_stat_generation_stage(cpi)) { |
| #if !CONFIG_PRIMARY_REF_FRAME_OPT |
| update_fb_of_context_type(cpi, &frame_params, cpi->fb_of_context_type); |
| #endif // !CONFIG_PRIMARY_REF_FRAME_OPT |
| set_additional_frame_flags(cm, frame_flags); |
| update_rc_counts(cpi); |
| } |
| |
| // Unpack frame_results: |
| *size = frame_results.size; |
| |
| // Leave a signal for a higher level caller about if this frame is droppable |
| if (*size > 0) { |
| cpi->droppable = is_frame_droppable(&ext_flags->refresh_frame); |
| } |
| |
| return AOM_CODEC_OK; |
| } |
| |
| // Determine whether a frame is a keyframe arf. Will return 0 for fwd kf arf. |
| // Note it depends on frame_since_key and gf_group, therefore should be called |
| // after the gf group is defined, or otherwise a keyframe arf may still return |
| // 0. |
| int av1_check_keyframe_arf(int gf_index, GF_GROUP *gf_group, |
| int frame_since_key) { |
| if (gf_index >= gf_group->size) return 0; |
| (void)frame_since_key; |
| return gf_group->update_type[gf_index] == KFFLT_UPDATE; |
| /* |
| return gf_group->update_type[gf_index] == ARF_UPDATE && |
| gf_group->update_type[gf_index + 1] == OVERLAY_UPDATE && |
| frame_since_key == 0; |
| */ |
| } |
| |
| // Determine whether a frame is a keyframe overlay (will also return 0 for fwd |
| // kf overlays). |
| int av1_check_keyframe_overlay(int gf_index, GF_GROUP *gf_group, |
| int frame_since_key) { |
| if (gf_index < 1) return 0; |
| (void)frame_since_key; |
| return gf_group->update_type[gf_index] == KFFLT_OVERLAY_UPDATE; |
| /* |
| return gf_group->update_type[gf_index - 1] == ARF_UPDATE && |
| gf_group->update_type[gf_index] == OVERLAY_UPDATE && |
| frame_since_key == 0; |
| */ |
| } |