| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 3-Clause Clear License |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear |
| * License was not distributed with this source code in the LICENSE file, you |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the |
| * Alliance for Open Media Patent License 1.0 was not distributed with this |
| * source code in the PATENTS file, you can obtain it at |
| * aomedia.org/license/patent-license/. |
| */ |
| |
| #include "aom_dsp/binary_codes_writer.h" |
| #include "aom_ports/system_state.h" |
| |
| #include "aom_dsp/flow_estimation/corner_detect.h" |
| #include "aom_dsp/flow_estimation/flow_estimation.h" |
| #include "aom_dsp/pyramid.h" |
| |
| #include "av1/common/mv.h" |
| #include "av1/encoder/encoder.h" |
| #include "av1/encoder/ethread.h" |
| #include "av1/encoder/global_motion_facade.h" |
| #include "av1/encoder/rdopt.h" |
| #include "av1/common/warped_motion.h" |
| |
| // Range of model types to search |
| #define FIRST_GLOBAL_TRANS_TYPE ROTZOOM |
| #define LAST_GLOBAL_TRANS_TYPE ROTZOOM |
| |
| // Computes the cost for the warp parameters. |
| static int gm_get_params_cost(const WarpedMotionParams *gm, |
| const WarpedMotionParams *ref_gm, |
| MvSubpelPrecision precision) { |
| const int precision_loss = get_gm_precision_loss(precision); |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| (void)precision_loss; |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| int params_cost = 0; |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| const int trans_bits = GM_ABS_TRANS_BITS; |
| const int trans_prec_diff = GM_TRANS_PREC_DIFF; |
| const int trans_max = (1 << trans_bits) - 1; |
| #else |
| const int trans_bits = (gm->wmtype == TRANSLATION) |
| ? GM_ABS_TRANS_ONLY_BITS - precision_loss |
| : GM_ABS_TRANS_BITS; |
| const int trans_prec_diff = (gm->wmtype == TRANSLATION) |
| ? GM_TRANS_ONLY_PREC_DIFF + precision_loss |
| : GM_TRANS_PREC_DIFF; |
| const int trans_max = (1 << trans_bits); |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| |
| switch (gm->wmtype) { |
| case AFFINE: |
| case ROTZOOM: |
| params_cost += aom_count_signed_primitive_refsubexpfin( |
| GM_ALPHA_MAX + 1, SUBEXPFIN_K, |
| (ref_gm->wmmat[2] >> GM_ALPHA_PREC_DIFF) - (1 << GM_ALPHA_PREC_BITS), |
| (gm->wmmat[2] >> GM_ALPHA_PREC_DIFF) - (1 << GM_ALPHA_PREC_BITS)); |
| params_cost += aom_count_signed_primitive_refsubexpfin( |
| GM_ALPHA_MAX + 1, SUBEXPFIN_K, |
| (ref_gm->wmmat[3] >> GM_ALPHA_PREC_DIFF), |
| (gm->wmmat[3] >> GM_ALPHA_PREC_DIFF)); |
| if (gm->wmtype >= AFFINE) { |
| params_cost += aom_count_signed_primitive_refsubexpfin( |
| GM_ALPHA_MAX + 1, SUBEXPFIN_K, |
| (ref_gm->wmmat[4] >> GM_ALPHA_PREC_DIFF), |
| (gm->wmmat[4] >> GM_ALPHA_PREC_DIFF)); |
| params_cost += aom_count_signed_primitive_refsubexpfin( |
| GM_ALPHA_MAX + 1, SUBEXPFIN_K, |
| (ref_gm->wmmat[5] >> GM_ALPHA_PREC_DIFF) - |
| (1 << GM_ALPHA_PREC_BITS), |
| (gm->wmmat[5] >> GM_ALPHA_PREC_DIFF) - (1 << GM_ALPHA_PREC_BITS)); |
| } |
| params_cost += aom_count_signed_primitive_refsubexpfin( |
| trans_max + 1, SUBEXPFIN_K, (ref_gm->wmmat[0] >> trans_prec_diff), |
| (gm->wmmat[0] >> trans_prec_diff)); |
| params_cost += aom_count_signed_primitive_refsubexpfin( |
| trans_max + 1, SUBEXPFIN_K, (ref_gm->wmmat[1] >> trans_prec_diff), |
| (gm->wmmat[1] >> trans_prec_diff)); |
| AOM_FALLTHROUGH_INTENDED; |
| case IDENTITY: break; |
| default: assert(0); |
| } |
| return (params_cost << AV1_PROB_COST_SHIFT); |
| } |
| |
| // For the given reference frame, computes the global motion parameters for |
| // different motion models and finds the best. |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| static AOM_INLINE void compute_global_motion_for_ref_frame( |
| AV1_COMP *cpi, struct aom_internal_error_info *error_info, |
| YV12_BUFFER_CONFIG *ref_buf[INTER_REFS_PER_FRAME], int frame, |
| MotionModel *motion_models, uint8_t *segment_map, const int segment_map_w, |
| const int segment_map_h) { |
| #else |
| static AOM_INLINE void compute_global_motion_for_ref_frame( |
| AV1_COMP *cpi, struct aom_internal_error_info *error_info, |
| YV12_BUFFER_CONFIG *ref_buf[INTER_REFS_PER_FRAME], int frame, |
| MotionModel *motion_models, uint8_t *segment_map, const int segment_map_w, |
| const int segment_map_h, const WarpedMotionParams *ref_params) { |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| AV1_COMMON *const cm = &cpi->common; |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| GlobalMotionInfo *const gm_info = &cpi->gm_info; |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| |
| int src_width = cpi->source->y_crop_width; |
| int src_height = cpi->source->y_crop_height; |
| int src_stride = cpi->source->y_stride; |
| |
| assert(ref_buf[frame] != NULL); |
| |
| aom_clear_system_state(); |
| |
| int bit_depth = cpi->common.seq_params.bit_depth; |
| GlobalMotionMethod global_motion_method = default_global_motion_method; |
| int downsample_level = cpi->sf.gm_sf.downsample_level; |
| int num_refinements = cpi->sf.gm_sf.num_refinement_steps; |
| bool mem_alloc_failed = false; |
| |
| // Select the best model based on fractional error reduction. |
| // By initializing this to erroradv_tr, the same logic which is used to |
| // select the best model will automatically filter out any model which |
| // doesn't meet the required quality threshold |
| double best_erroradv = erroradv_tr; |
| for (TransformationType model = FIRST_GLOBAL_TRANS_TYPE; |
| model <= LAST_GLOBAL_TRANS_TYPE; ++model) { |
| if (!aom_compute_global_motion(model, cpi->source, ref_buf[frame], |
| bit_depth, global_motion_method, |
| downsample_level, motion_models, |
| RANSAC_NUM_MOTIONS, &mem_alloc_failed)) { |
| if (mem_alloc_failed) { |
| aom_internal_error(error_info, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate global motion buffers"); |
| } |
| continue; |
| } |
| |
| for (int i = 0; i < RANSAC_NUM_MOTIONS; ++i) { |
| if (motion_models[i].num_inliers == 0) continue; |
| |
| WarpedMotionParams tmp_wm_params; |
| memcpy(tmp_wm_params.wmmat, motion_models[i].params, |
| MAX_PARAMDIM * sizeof(*tmp_wm_params.wmmat)); |
| tmp_wm_params.wmtype = get_wmtype(&tmp_wm_params); |
| tmp_wm_params.invalid = 0; |
| |
| // Check that the generated model is warp-able |
| if (!av1_get_shear_params(&tmp_wm_params)) continue; |
| |
| // Skip models that we won't use (IDENTITY or TRANSLATION) |
| // |
| // For IDENTITY type models, we don't need to evaluate anything because |
| // all the following logic is effectively comparing the estimated model |
| // to an identity model. |
| // |
| // For TRANSLATION type global motion models, gm_get_motion_vector() gives |
| // the wrong motion vector (see comments in that function for details). |
| // As translation-type models do not give much gain, we can avoid this bug |
| // by never choosing a TRANSLATION type model |
| if (tmp_wm_params.wmtype <= TRANSLATION) continue; |
| |
| av1_compute_feature_segmentation_map( |
| segment_map, segment_map_w, segment_map_h, motion_models[i].inliers, |
| motion_models[i].num_inliers); |
| |
| int64_t ref_frame_error = av1_segmented_frame_error( |
| bit_depth, ref_buf[frame]->y_buffer, ref_buf[frame]->y_stride, |
| cpi->source->y_buffer, src_stride, src_width, src_height, segment_map, |
| segment_map_w); |
| |
| if (ref_frame_error == 0) continue; |
| |
| const int64_t warp_error = av1_refine_integerized_param( |
| &tmp_wm_params, tmp_wm_params.wmtype, bit_depth, |
| ref_buf[frame]->y_buffer, ref_buf[frame]->y_crop_width, |
| ref_buf[frame]->y_crop_height, ref_buf[frame]->y_stride, |
| cpi->source->y_buffer, src_width, src_height, src_stride, |
| num_refinements, ref_frame_error, segment_map, segment_map_w); |
| |
| // av1_refine_integerized_param() can return a simpler model type than |
| // its input, so re-check model type here |
| if (tmp_wm_params.wmtype <= TRANSLATION) continue; |
| |
| double erroradvantage = (double)warp_error / ref_frame_error; |
| |
| #if !CONFIG_IMPROVED_GLOBAL_MOTION |
| // Check that the model signaling cost is not too high |
| if (!av1_is_enough_erroradvantage( |
| erroradvantage, |
| gm_get_params_cost(&tmp_wm_params, ref_params, |
| cm->features.allow_high_precision_mv))) { |
| continue; |
| } |
| #endif // !CONFIG_IMPROVED_GLOBAL_MOTION |
| |
| if (erroradvantage < best_erroradv) { |
| best_erroradv = erroradvantage; |
| // Save the wm_params modified by |
| // av1_refine_integerized_param() rather than motion index to |
| // avoid rerunning refine() below. |
| memcpy(&(cm->global_motion[frame]), &tmp_wm_params, |
| sizeof(WarpedMotionParams)); |
| } |
| } |
| } |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| gm_info->erroradvantage[frame] = best_erroradv; |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| aom_clear_system_state(); |
| } |
| |
| // Computes global motion for the given reference frame. |
| void av1_compute_gm_for_valid_ref_frames( |
| AV1_COMP *cpi, struct aom_internal_error_info *error_info, |
| YV12_BUFFER_CONFIG *ref_buf[INTER_REFS_PER_FRAME], int frame, |
| MotionModel *motion_models, uint8_t *segment_map, int segment_map_w, |
| int segment_map_h) { |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| compute_global_motion_for_ref_frame(cpi, error_info, ref_buf, frame, |
| motion_models, segment_map, segment_map_w, |
| segment_map_h); |
| #else |
| AV1_COMMON *const cm = &cpi->common; |
| const WarpedMotionParams *ref_params = |
| cm->prev_frame ? &cm->prev_frame->global_motion[frame] |
| : &default_warp_params; |
| |
| compute_global_motion_for_ref_frame(cpi, error_info, ref_buf, frame, |
| motion_models, segment_map, segment_map_w, |
| segment_map_h, ref_params); |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| } |
| |
| // Loops over valid reference frames and computes global motion estimation. |
| static AOM_INLINE void compute_global_motion_for_references( |
| AV1_COMP *cpi, YV12_BUFFER_CONFIG *ref_buf[INTER_REFS_PER_FRAME], |
| FrameDistPair reference_frame[INTER_REFS_PER_FRAME], int num_ref_frames, |
| MotionModel *motion_models, uint8_t *segment_map, const int segment_map_w, |
| const int segment_map_h) { |
| AV1_COMMON *const cm = &cpi->common; |
| struct aom_internal_error_info *const error_info = |
| cpi->td.mb.e_mbd.error_info; |
| // Compute global motion w.r.t. reference frames starting from the nearest ref |
| // frame in a given direction. |
| for (int frame = 0; frame < num_ref_frames; frame++) { |
| int ref_frame = reference_frame[frame].frame; |
| av1_compute_gm_for_valid_ref_frames(cpi, error_info, ref_buf, ref_frame, |
| motion_models, segment_map, |
| segment_map_w, segment_map_h); |
| // If global motion w.r.t. current ref frame is |
| // INVALID/TRANSLATION/IDENTITY, skip the evaluation of global motion w.r.t |
| // the remaining ref frames in that direction. The below exit is disabled |
| // when ref frame distance w.r.t. current frame is zero. E.g.: |
| // source_alt_ref_frame w.r.t. ARF frames. |
| if (cpi->sf.gm_sf.prune_ref_frame_for_gm_search && |
| reference_frame[frame].distance != 0 && |
| cm->global_motion[ref_frame].wmtype <= TRANSLATION) |
| break; |
| } |
| } |
| |
| // Compares the distance in 'a' and 'b'. Returns 1 if the frame corresponding to |
| // 'a' is farther, -1 if the frame corresponding to 'b' is farther, 0 otherwise. |
| static int compare_distance(const void *a, const void *b) { |
| const int diff = |
| ((FrameDistPair *)a)->distance - ((FrameDistPair *)b)->distance; |
| if (diff > 0) |
| return 1; |
| else if (diff < 0) |
| return -1; |
| return 0; |
| } |
| |
| static int disable_gm_search_based_on_stats(const AV1_COMP *const cpi) { |
| const GF_GROUP *gf_group = &cpi->gf_group; |
| int is_gm_present = 1; |
| |
| // Check number of GM models only in GF groups with ARF frames. GM param |
| // estimation is always done in the case of GF groups with no ARF frames (flat |
| // gops) |
| if (gf_group->arf_index > -1) { |
| // valid_gm_model_found is initialized to INT32_MAX in the beginning of |
| // every GF group. |
| // Therefore, GM param estimation is always done for all frames until |
| // at least 1 frame each of ARF_UPDATE, INTNL_ARF_UPDATE and LF_UPDATE are |
| // encoded in a GF group For subsequent frames, GM param estimation is |
| // disabled, if no valid models have been found in all the three update |
| // types. |
| is_gm_present = (cpi->valid_gm_model_found[ARF_UPDATE] != 0) || |
| (cpi->valid_gm_model_found[INTNL_ARF_UPDATE] != 0) || |
| (cpi->valid_gm_model_found[LF_UPDATE] != 0); |
| } |
| return !is_gm_present; |
| } |
| |
| // Populates valid reference frames in past/future directions in |
| // 'reference_frames' and their count in 'num_ref_frames'. |
| static AOM_INLINE void update_valid_ref_frames_for_gm( |
| AV1_COMP *cpi, YV12_BUFFER_CONFIG *ref_buf[INTER_REFS_PER_FRAME], |
| FrameDistPair reference_frames[MAX_DIRECTIONS][INTER_REFS_PER_FRAME], |
| int *num_ref_frames) { |
| AV1_COMMON *const cm = &cpi->common; |
| int *num_past_ref_frames = &num_ref_frames[0]; |
| int *num_future_ref_frames = &num_ref_frames[1]; |
| const GF_GROUP *gf_group = &cpi->gf_group; |
| int ref_pruning_enabled = is_frame_eligible_for_ref_pruning( |
| gf_group, cpi->sf.inter_sf.selective_ref_frame, 1, gf_group->index); |
| int cur_frame_gm_disabled = 0; |
| int pyr_lvl = cm->cur_frame->pyramid_level; |
| |
| if (cpi->sf.gm_sf.disable_gm_search_based_on_stats) { |
| cur_frame_gm_disabled = disable_gm_search_based_on_stats(cpi); |
| } |
| |
| for (int frame = cm->ref_frames_info.num_total_refs - 1; frame >= 0; |
| --frame) { |
| const MV_REFERENCE_FRAME ref_frame[2] = { frame, NONE_FRAME }; |
| #if CONFIG_ALLOW_SAME_REF_COMPOUND |
| assert(frame <= INTER_REFS_PER_FRAME); |
| #endif // CONFIG_ALLOW_SAME_REF_COMPOUND |
| const int ref_disabled = !(cm->ref_frame_flags & (1 << frame)); |
| ref_buf[frame] = NULL; |
| cm->global_motion[frame] = default_warp_params; |
| RefCntBuffer *buf = get_ref_frame_buf(cm, frame); |
| // Skip global motion estimation for invalid ref frames |
| if (buf == NULL || |
| (ref_disabled && cpi->sf.hl_sf.recode_loop != DISALLOW_RECODE)) { |
| continue; |
| } else { |
| ref_buf[frame] = &buf->buf; |
| } |
| |
| int prune_ref_frames = |
| ref_pruning_enabled && |
| prune_ref_by_selective_ref_frame(cpi, NULL, ref_frame); |
| int ref_pyr_lvl = buf->pyramid_level; |
| |
| if (ref_buf[frame]->y_crop_width == cpi->source->y_crop_width && |
| ref_buf[frame]->y_crop_height == cpi->source->y_crop_height && |
| frame < cpi->sf.gm_sf.max_ref_frames && !prune_ref_frames && |
| ref_pyr_lvl <= pyr_lvl && !cur_frame_gm_disabled) { |
| assert(ref_buf[frame] != NULL); |
| const int relative_frame_dist = av1_encoder_get_relative_dist( |
| buf->display_order_hint, cm->cur_frame->display_order_hint); |
| // Populate past and future ref frames. |
| // reference_frames[0][] indicates past direction and |
| // reference_frames[1][] indicates future direction. |
| if (relative_frame_dist <= 0) { |
| reference_frames[0][*num_past_ref_frames].distance = |
| abs(relative_frame_dist); |
| reference_frames[0][*num_past_ref_frames].frame = frame; |
| (*num_past_ref_frames)++; |
| } else { |
| reference_frames[1][*num_future_ref_frames].distance = |
| abs(relative_frame_dist); |
| reference_frames[1][*num_future_ref_frames].frame = frame; |
| (*num_future_ref_frames)++; |
| } |
| } |
| } |
| } |
| |
| // Allocates and initializes memory for segment_map and MotionModel. |
| static AOM_INLINE void alloc_global_motion_data(MotionModel *motion_models, |
| uint8_t **segment_map, |
| const int segment_map_w, |
| const int segment_map_h) { |
| for (int m = 0; m < RANSAC_NUM_MOTIONS; m++) { |
| av1_zero(motion_models[m]); |
| motion_models[m].inliers = |
| aom_malloc(sizeof(*(motion_models[m].inliers)) * 2 * MAX_CORNERS); |
| } |
| |
| *segment_map = (uint8_t *)aom_malloc(sizeof(*segment_map) * segment_map_w * |
| segment_map_h); |
| av1_zero_array(*segment_map, segment_map_w * segment_map_h); |
| } |
| |
| // Deallocates segment_map and inliers. |
| static AOM_INLINE void dealloc_global_motion_data(MotionModel *motion_models, |
| uint8_t *segment_map) { |
| aom_free(segment_map); |
| |
| for (int m = 0; m < RANSAC_NUM_MOTIONS; m++) { |
| aom_free(motion_models[m].inliers); |
| } |
| } |
| |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| // Select which global motion model to use as a base |
| static AOM_INLINE void pick_base_gm_params(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| const SequenceHeader *const seq_params = &cm->seq_params; |
| GlobalMotionInfo *const gm_info = &cpi->gm_info; |
| int num_total_refs = cm->ref_frames_info.num_total_refs; |
| |
| int best_our_ref; |
| int best_their_ref; |
| const WarpedMotionParams *best_base_model; |
| int best_temporal_distance; |
| int best_num_models; |
| int best_cost; |
| |
| // Bitmask of which models we will actually use if we accept the current |
| // best base model |
| uint8_t best_enable_models; |
| |
| // First, evaluate the identity model as a base |
| { |
| int this_num_models = 0; |
| int this_cost = |
| aom_count_primitive_quniform(num_total_refs + 1, num_total_refs) |
| << AV1_PROB_COST_SHIFT; |
| uint8_t this_enable_models = 0; |
| |
| for (int frame = 0; frame < num_total_refs; frame++) { |
| const WarpedMotionParams *model = &cm->global_motion[frame]; |
| if (model->wmtype == IDENTITY) continue; |
| int model_cost = gm_get_params_cost(model, &default_warp_params, |
| cm->features.fr_mv_precision); |
| bool use_model = av1_is_enough_erroradvantage( |
| gm_info->erroradvantage[frame], model_cost); |
| |
| if (use_model) { |
| this_num_models += 1; |
| this_cost += model_cost; |
| this_enable_models |= (1 << frame); |
| } |
| } |
| |
| // Set initial values |
| best_our_ref = cm->ref_frames_info.num_total_refs; |
| best_their_ref = -1; |
| best_base_model = &default_warp_params; |
| best_temporal_distance = 1; |
| best_num_models = this_num_models; |
| best_cost = this_cost; |
| best_enable_models = this_enable_models; |
| } |
| |
| // Then try each available reference model in turn |
| for (int our_ref = 0; our_ref < num_total_refs; ++our_ref) { |
| const int ref_disabled = !(cm->ref_frame_flags & (1 << our_ref)); |
| RefCntBuffer *buf = get_ref_frame_buf(cm, our_ref); |
| // Skip looking at invalid ref frames |
| if (buf == NULL || |
| (ref_disabled && cpi->sf.hl_sf.recode_loop != DISALLOW_RECODE)) { |
| continue; |
| } |
| |
| int their_num_refs = buf->num_ref_frames; |
| for (int their_ref = 0; their_ref < their_num_refs; ++their_ref) { |
| const WarpedMotionParams *base_model = &buf->global_motion[their_ref]; |
| if (base_model->wmtype == IDENTITY) { |
| continue; |
| } |
| |
| #if CONFIG_EXPLICIT_TEMPORAL_DIST_CALC |
| const int our_ref_order_hint = buf->display_order_hint; |
| const int their_ref_order_hint = buf->ref_display_order_hint[their_ref]; |
| #else |
| const int our_ref_order_hint = buf->order_hint; |
| const int their_ref_order_hint = buf->ref_order_hints[their_ref]; |
| #endif // CONFIG_EXPLICIT_TEMPORAL_DIST_CALC |
| int base_temporal_distance = |
| get_relative_dist(&seq_params->order_hint_info, our_ref_order_hint, |
| their_ref_order_hint); |
| |
| int this_num_models = 0; |
| int this_cost = |
| (aom_count_primitive_quniform(num_total_refs + 1, our_ref) + |
| aom_count_primitive_quniform(their_num_refs, their_ref)) |
| << AV1_PROB_COST_SHIFT; |
| uint8_t this_enable_models = 0; |
| |
| for (int frame = 0; frame < num_total_refs; frame++) { |
| const WarpedMotionParams *model = &cm->global_motion[frame]; |
| if (model->wmtype == IDENTITY) continue; |
| |
| int temporal_distance; |
| if (seq_params->order_hint_info.enable_order_hint) { |
| const RefCntBuffer *const ref_buf = get_ref_frame_buf(cm, frame); |
| #if CONFIG_EXPLICIT_TEMPORAL_DIST_CALC |
| const int ref_order_hint = ref_buf->display_order_hint; |
| const int cur_order_hint = cm->cur_frame->display_order_hint; |
| #else |
| const int ref_order_hint = ref_buf->order_hint; |
| const int cur_order_hint = cm->cur_frame->order_hint; |
| #endif // CONFIG_EXPLICIT_TEMPORAL_DIST_CALC |
| temporal_distance = get_relative_dist(&seq_params->order_hint_info, |
| cur_order_hint, ref_order_hint); |
| } else { |
| temporal_distance = 1; |
| } |
| |
| if (temporal_distance == 0) { |
| // Don't code global motion for frames at the same temporal instant |
| assert(model->wmtype == IDENTITY); |
| continue; |
| } |
| |
| WarpedMotionParams ref_params; |
| av1_scale_warp_model(base_model, base_temporal_distance, &ref_params, |
| temporal_distance); |
| |
| int model_cost = gm_get_params_cost(model, &ref_params, |
| cm->features.fr_mv_precision); |
| bool use_model = av1_is_enough_erroradvantage( |
| gm_info->erroradvantage[frame], model_cost); |
| |
| if (use_model) { |
| this_num_models += 1; |
| this_cost += model_cost; |
| this_enable_models |= (1 << frame); |
| } |
| } |
| |
| if (this_num_models > best_num_models || |
| (this_num_models == best_num_models && this_cost < best_cost)) { |
| best_our_ref = our_ref; |
| best_their_ref = their_ref; |
| best_base_model = base_model; |
| best_temporal_distance = base_temporal_distance; |
| best_num_models = this_num_models; |
| best_cost = this_cost; |
| best_enable_models = this_enable_models; |
| } |
| } |
| } |
| |
| gm_info->base_model_our_ref = best_our_ref; |
| gm_info->base_model_their_ref = best_their_ref; |
| cm->base_global_motion_model = *best_base_model; |
| cm->base_global_motion_distance = best_temporal_distance; |
| |
| for (int frame = 0; frame < num_total_refs; frame++) { |
| if ((best_enable_models & (1 << frame)) == 0) { |
| // Disable this model |
| cm->global_motion[frame] = default_warp_params; |
| } |
| } |
| } |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| |
| // Initializes parameters used for computing global motion. |
| static AOM_INLINE void setup_global_motion_info_params(AV1_COMP *cpi) { |
| GlobalMotionInfo *const gm_info = &cpi->gm_info; |
| YV12_BUFFER_CONFIG *source = cpi->source; |
| |
| gm_info->segment_map_w = |
| (source->y_crop_width + WARP_ERROR_BLOCK - 1) >> WARP_ERROR_BLOCK_LOG; |
| gm_info->segment_map_h = |
| (source->y_crop_height + WARP_ERROR_BLOCK - 1) >> WARP_ERROR_BLOCK_LOG; |
| |
| memset(gm_info->reference_frames, -1, |
| sizeof(gm_info->reference_frames[0][0]) * MAX_DIRECTIONS * |
| INTER_REFS_PER_FRAME); |
| av1_zero(gm_info->num_ref_frames); |
| |
| // Populate ref_buf for valid ref frames in global motion |
| update_valid_ref_frames_for_gm(cpi, gm_info->ref_buf, |
| gm_info->reference_frames, |
| gm_info->num_ref_frames); |
| |
| // Sort the past and future ref frames in the ascending order of their |
| // distance from the current frame. reference_frames[0] => past direction |
| // and reference_frames[1] => future direction. |
| qsort(gm_info->reference_frames[0], gm_info->num_ref_frames[0], |
| sizeof(gm_info->reference_frames[0][0]), compare_distance); |
| qsort(gm_info->reference_frames[1], gm_info->num_ref_frames[1], |
| sizeof(gm_info->reference_frames[1][0]), compare_distance); |
| } |
| |
| // Computes global motion w.r.t. valid reference frames. |
| static AOM_INLINE void global_motion_estimation(AV1_COMP *cpi) { |
| GlobalMotionInfo *const gm_info = &cpi->gm_info; |
| |
| MotionModel motion_models[RANSAC_NUM_MOTIONS]; |
| uint8_t *segment_map = NULL; |
| |
| alloc_global_motion_data(motion_models, &segment_map, gm_info->segment_map_w, |
| gm_info->segment_map_h); |
| |
| // Compute global motion w.r.t. past reference frames and future reference |
| // frames |
| for (int dir = 0; dir < MAX_DIRECTIONS; dir++) { |
| if (gm_info->num_ref_frames[dir] > 0) |
| compute_global_motion_for_references( |
| cpi, gm_info->ref_buf, gm_info->reference_frames[dir], |
| gm_info->num_ref_frames[dir], motion_models, segment_map, |
| gm_info->segment_map_w, gm_info->segment_map_h); |
| } |
| |
| dealloc_global_motion_data(motion_models, segment_map); |
| } |
| |
| // Updates frame level stats related to global motion |
| static AOM_INLINE void update_gm_stats(AV1_COMP *cpi) { |
| const GF_GROUP *gf_group = &cpi->gf_group; |
| FRAME_UPDATE_TYPE update_type = gf_group->update_type[gf_group->index]; |
| int i, is_gm_present = 0; |
| |
| // Check if the current frame has any valid global motion model across its |
| // reference frames |
| for (i = 0; i < INTER_REFS_PER_FRAME; i++) { |
| if (cpi->common.global_motion[i].wmtype != IDENTITY) { |
| is_gm_present = 1; |
| break; |
| } |
| } |
| |
| int update_actual_stats = 1; |
| if (update_actual_stats) { |
| if (cpi->valid_gm_model_found[update_type] == INT32_MAX) { |
| cpi->valid_gm_model_found[update_type] = is_gm_present; |
| } else { |
| cpi->valid_gm_model_found[update_type] |= is_gm_present; |
| } |
| } |
| } |
| |
| // Global motion estimation for the current frame is computed.This computation |
| // happens once per frame and the winner motion model parameters are stored in |
| // cm->cur_frame->global_motion. |
| void av1_compute_global_motion_facade(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| const GF_GROUP *gf_group = &cpi->gf_group; |
| GlobalMotionInfo *const gm_info = &cpi->gm_info; |
| |
| // Reset `valid_gm_model_found` at the start of each GOP |
| if (cpi->oxcf.tool_cfg.enable_global_motion) { |
| if (gf_group->index == 0) { |
| for (int i = 0; i < FRAME_UPDATE_TYPES; i++) { |
| cpi->valid_gm_model_found[i] = INT32_MAX; |
| } |
| } |
| } |
| |
| if (cpi->common.current_frame.frame_type == INTER_FRAME && cpi->source && |
| cpi->oxcf.tool_cfg.enable_global_motion && |
| cpi->sf.gm_sf.max_ref_frames > 0 && !gm_info->search_done) { |
| setup_global_motion_info_params(cpi); |
| |
| if (cpi->mt_info.num_workers > 1) |
| av1_global_motion_estimation_mt(cpi); |
| else |
| global_motion_estimation(cpi); |
| |
| #if CONFIG_IMPROVED_GLOBAL_MOTION |
| // Once we have determined the best motion model for each ref frame, |
| // choose the base parameters to minimize the total encoding cost |
| pick_base_gm_params(cpi); |
| #endif // CONFIG_IMPROVED_GLOBAL_MOTION |
| |
| update_gm_stats(cpi); |
| |
| gm_info->search_done = 1; |
| } |
| |
| memcpy(cm->cur_frame->global_motion, cm->global_motion, |
| sizeof(cm->cur_frame->global_motion)); |
| } |