| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 3-Clause Clear License |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear |
| * License was not distributed with this source code in the LICENSE file, you |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the |
| * Alliance for Open Media Patent License 1.0 was not distributed with this |
| * source code in the PATENTS file, you can obtain it at |
| * aomedia.org/license/patent-license/. |
| */ |
| |
| #include "av1/encoder/tune_vmaf.h" |
| |
| #include "aom_dsp/psnr.h" |
| #include "aom_ports/system_state.h" |
| #include "av1/encoder/extend.h" |
| #include "av1/encoder/rdopt.h" |
| #if CONFIG_USE_VMAF_RC |
| #include "config/aom_scale_rtcd.h" |
| #endif |
| |
| static const double kBaselineVmaf = 97.42773; |
| |
| static double get_layer_value(const double *array, int layer) { |
| while (array[layer] < 0.0 && layer > 0) layer--; |
| return AOMMAX(array[layer], 0.0); |
| } |
| |
| static void motion_search(AV1_COMP *cpi, const YV12_BUFFER_CONFIG *src, |
| const YV12_BUFFER_CONFIG *ref, |
| const BLOCK_SIZE block_size, const int mb_row, |
| const int mb_col, FULLPEL_MV *ref_mv) { |
| // Block information (ONLY Y-plane is used for motion search). |
| const int mb_height = block_size_high[block_size]; |
| const int mb_width = block_size_wide[block_size]; |
| const int y_stride = src->y_stride; |
| assert(y_stride == ref->y_stride); |
| const int y_offset = mb_row * mb_height * y_stride + mb_col * mb_width; |
| |
| // Save input state. |
| MACROBLOCK *const mb = &cpi->td.mb; |
| MACROBLOCKD *const mbd = &mb->e_mbd; |
| const struct buf_2d ori_src_buf = mb->plane[0].src; |
| const struct buf_2d ori_pre_buf = mbd->plane[0].pre[0]; |
| |
| // Parameters used for motion search. |
| FULLPEL_MOTION_SEARCH_PARAMS full_ms_params; |
| const SEARCH_METHODS search_method = NSTEP; |
| const search_site_config *search_site_cfg = |
| cpi->mv_search_params.search_site_cfg[SS_CFG_FPF]; |
| const int step_param = |
| av1_init_search_range(AOMMAX(src->y_crop_width, src->y_crop_height)); |
| |
| // Baseline position for motion search (used for rate distortion comparison). |
| const MV baseline_mv = kZeroMv; |
| |
| // Setup. |
| mb->plane[0].src.buf = src->y_buffer + y_offset; |
| mb->plane[0].src.stride = y_stride; |
| mbd->plane[0].pre[0].buf = ref->y_buffer + y_offset; |
| mbd->plane[0].pre[0].stride = y_stride; |
| |
| // Unused intermediate results for motion search. |
| int cost_list[5]; |
| |
| // Do motion search. |
| // Only do full search on the entire block. |
| av1_make_default_fullpel_ms_params(&full_ms_params, cpi, mb, block_size, |
| &baseline_mv, MV_PRECISION_ONE_EIGHTH_PEL, |
| #if CONFIG_IBC_BV_IMPROVEMENT |
| 0, |
| #endif |
| |
| search_site_cfg, |
| /*fine_search_interval=*/0); |
| av1_set_mv_search_method(&full_ms_params, search_site_cfg, search_method); |
| av1_full_pixel_search(*ref_mv, &full_ms_params, step_param, |
| cond_cost_list(cpi, cost_list), ref_mv, NULL); |
| |
| // Restore input state. |
| mb->plane[0].src = ori_src_buf; |
| mbd->plane[0].pre[0] = ori_pre_buf; |
| } |
| |
| static unsigned int residual_variance(const AV1_COMP *cpi, |
| const YV12_BUFFER_CONFIG *src, |
| const YV12_BUFFER_CONFIG *ref, |
| const BLOCK_SIZE block_size, |
| const int mb_row, const int mb_col, |
| FULLPEL_MV ref_mv, unsigned int *sse) { |
| const int mb_height = block_size_high[block_size]; |
| const int mb_width = block_size_wide[block_size]; |
| const int y_stride = src->y_stride; |
| assert(y_stride == ref->y_stride); |
| const int y_offset = mb_row * mb_height * y_stride + mb_col * mb_width; |
| const int mv_offset = ref_mv.row * y_stride + ref_mv.col; |
| const unsigned int var = |
| cpi->fn_ptr[block_size].vf(ref->y_buffer + y_offset + mv_offset, y_stride, |
| src->y_buffer + y_offset, y_stride, sse); |
| return var; |
| } |
| |
| static double frame_average_variance(const AV1_COMP *const cpi, |
| const YV12_BUFFER_CONFIG *const frame) { |
| const uint16_t *const y_buffer = frame->y_buffer; |
| const int y_stride = frame->y_stride; |
| const BLOCK_SIZE block_size = BLOCK_64X64; |
| |
| const int block_w = mi_size_wide[block_size] * 4; |
| const int block_h = mi_size_high[block_size] * 4; |
| int row, col; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| double var = 0.0, var_count = 0.0; |
| |
| // Loop through each block. |
| for (row = 0; row < frame->y_height / block_h; ++row) { |
| for (col = 0; col < frame->y_width / block_w; ++col) { |
| struct buf_2d buf; |
| const int row_offset_y = row * block_h; |
| const int col_offset_y = col * block_w; |
| |
| buf.buf = y_buffer + row_offset_y * y_stride + col_offset_y; |
| buf.stride = y_stride; |
| |
| var += |
| av1_high_get_sby_perpixel_variance(cpi, &buf, block_size, bit_depth); |
| var_count += 1.0; |
| } |
| } |
| var /= var_count; |
| return var; |
| } |
| |
| static double residual_frame_average_variance(AV1_COMP *cpi, |
| const YV12_BUFFER_CONFIG *src, |
| const YV12_BUFFER_CONFIG *ref, |
| FULLPEL_MV *mvs) { |
| if (ref == NULL) return frame_average_variance(cpi, src); |
| const BLOCK_SIZE block_size = BLOCK_16X16; |
| const int frame_height = src->y_height; |
| const int frame_width = src->y_width; |
| const int mb_height = block_size_high[block_size]; |
| const int mb_width = block_size_wide[block_size]; |
| const int mb_rows = (frame_height + mb_height - 1) / mb_height; |
| const int mb_cols = (frame_width + mb_width - 1) / mb_width; |
| const int num_planes = av1_num_planes(&cpi->common); |
| const int mi_h = mi_size_high_log2[block_size]; |
| const int mi_w = mi_size_wide_log2[block_size]; |
| assert(num_planes >= 1 && num_planes <= MAX_MB_PLANE); |
| |
| // Save input state. |
| MACROBLOCK *const mb = &cpi->td.mb; |
| MACROBLOCKD *const mbd = &mb->e_mbd; |
| uint16_t *input_buffer[MAX_MB_PLANE]; |
| for (int i = 0; i < num_planes; i++) { |
| input_buffer[i] = mbd->plane[i].pre[0].buf; |
| } |
| MB_MODE_INFO **input_mb_mode_info = mbd->mi; |
| |
| bool do_motion_search = false; |
| if (mvs == NULL) { |
| do_motion_search = true; |
| mvs = (FULLPEL_MV *)aom_malloc(sizeof(*mvs) * mb_rows * mb_cols); |
| memset(mvs, 0, sizeof(*mvs) * mb_rows * mb_cols); |
| } |
| |
| unsigned int variance = 0; |
| // Perform temporal filtering block by block. |
| for (int mb_row = 0; mb_row < mb_rows; mb_row++) { |
| av1_set_mv_row_limits(&cpi->common.mi_params, &mb->mv_limits, |
| (mb_row << mi_h), (mb_height >> MI_SIZE_LOG2), |
| cpi->oxcf.border_in_pixels); |
| for (int mb_col = 0; mb_col < mb_cols; mb_col++) { |
| av1_set_mv_col_limits(&cpi->common.mi_params, &mb->mv_limits, |
| (mb_col << mi_w), (mb_width >> MI_SIZE_LOG2), |
| cpi->oxcf.border_in_pixels); |
| FULLPEL_MV *ref_mv = &mvs[mb_col + mb_row * mb_cols]; |
| if (do_motion_search) { |
| motion_search(cpi, src, ref, block_size, mb_row, mb_col, ref_mv); |
| } |
| unsigned int mv_sse; |
| const unsigned int blk_var = residual_variance( |
| cpi, src, ref, block_size, mb_row, mb_col, *ref_mv, &mv_sse); |
| variance += blk_var; |
| } |
| } |
| |
| // Restore input state |
| for (int i = 0; i < num_planes; i++) { |
| mbd->plane[i].pre[0].buf = input_buffer[i]; |
| } |
| mbd->mi = input_mb_mode_info; |
| return (double)variance / (double)(mb_rows * mb_cols); |
| } |
| |
| // TODO(sdeng): Add the SIMD implementation. |
| static AOM_INLINE void highbd_unsharp_rect(const uint16_t *source, |
| int source_stride, |
| const uint16_t *blurred, |
| int blurred_stride, uint16_t *dst, |
| int dst_stride, int w, int h, |
| double amount, int bit_depth) { |
| const int max_value = (1 << bit_depth) - 1; |
| for (int i = 0; i < h; ++i) { |
| for (int j = 0; j < w; ++j) { |
| const double val = |
| (double)source[j] + amount * ((double)source[j] - (double)blurred[j]); |
| dst[j] = (uint16_t)clamp((int)(val + 0.5), 0, max_value); |
| } |
| source += source_stride; |
| blurred += blurred_stride; |
| dst += dst_stride; |
| } |
| } |
| |
| static AOM_INLINE void unsharp(const AV1_COMP *const cpi, |
| const YV12_BUFFER_CONFIG *source, |
| const YV12_BUFFER_CONFIG *blurred, |
| const YV12_BUFFER_CONFIG *dst, double amount) { |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| highbd_unsharp_rect(source->y_buffer, source->y_stride, blurred->y_buffer, |
| blurred->y_stride, dst->y_buffer, dst->y_stride, |
| source->y_width, source->y_height, amount, bit_depth); |
| } |
| |
| // 8-tap Gaussian convolution filter with sigma = 1.0, sums to 128, |
| // all co-efficients must be even. |
| DECLARE_ALIGNED(16, static const int16_t, gauss_filter[8]) = { 0, 8, 30, 52, |
| 30, 8, 0, 0 }; |
| static AOM_INLINE void gaussian_blur(const int bit_depth, |
| const YV12_BUFFER_CONFIG *source, |
| const YV12_BUFFER_CONFIG *dst) { |
| const int block_size = BLOCK_128X128; |
| const int block_w = mi_size_wide[block_size] * 4; |
| const int block_h = mi_size_high[block_size] * 4; |
| const int num_cols = (source->y_width + block_w - 1) / block_w; |
| const int num_rows = (source->y_height + block_h - 1) / block_h; |
| int row, col; |
| |
| ConvolveParams conv_params = get_conv_params(0, 0, bit_depth); |
| InterpFilterParams filter = { .filter_ptr = gauss_filter, |
| .taps = 8, |
| .interp_filter = EIGHTTAP_REGULAR }; |
| |
| for (row = 0; row < num_rows; ++row) { |
| for (col = 0; col < num_cols; ++col) { |
| const int row_offset_y = row * block_h; |
| const int col_offset_y = col * block_w; |
| |
| uint16_t *src_buf = |
| source->y_buffer + row_offset_y * source->y_stride + col_offset_y; |
| uint16_t *dst_buf = |
| dst->y_buffer + row_offset_y * dst->y_stride + col_offset_y; |
| |
| av1_highbd_convolve_2d_sr(src_buf, source->y_stride, dst_buf, |
| dst->y_stride, block_w, block_h, &filter, |
| &filter, 0, 0, &conv_params, bit_depth); |
| } |
| } |
| } |
| |
| static AOM_INLINE double cal_approx_vmaf(const AV1_COMP *const cpi, |
| #if CONFIG_USE_VMAF_RC |
| VmafContext *vmaf_context, |
| int *vmaf_cal_index, |
| #endif |
| double source_variance, |
| YV12_BUFFER_CONFIG *const source, |
| YV12_BUFFER_CONFIG *const sharpened) { |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| double new_vmaf; |
| |
| #if CONFIG_USE_VMAF_RC |
| aom_calc_vmaf_at_index_rc(vmaf_context, cpi->vmaf_info.vmaf_model, source, |
| sharpened, bit_depth, *vmaf_cal_index, &new_vmaf); |
| (*vmaf_cal_index)++; |
| #else |
| aom_calc_vmaf(cpi->oxcf.tune_cfg.vmaf_model_path, source, sharpened, |
| bit_depth, &new_vmaf); |
| #endif |
| |
| const double sharpened_var = frame_average_variance(cpi, sharpened); |
| return source_variance / sharpened_var * (new_vmaf - kBaselineVmaf); |
| } |
| |
| static double find_best_frame_unsharp_amount_loop( |
| const AV1_COMP *const cpi, |
| #if CONFIG_USE_VMAF_RC |
| VmafContext *vmaf_context, int *vmaf_cal_index, |
| #endif |
| YV12_BUFFER_CONFIG *const source, YV12_BUFFER_CONFIG *const blurred, |
| YV12_BUFFER_CONFIG *const sharpened, double best_vmaf, |
| const double baseline_variance, const double unsharp_amount_start, |
| const double step_size, const int max_loop_count, const double max_amount) { |
| const double min_amount = 0.0; |
| int loop_count = 0; |
| double approx_vmaf = best_vmaf; |
| double unsharp_amount = unsharp_amount_start; |
| do { |
| best_vmaf = approx_vmaf; |
| unsharp_amount += step_size; |
| if (unsharp_amount > max_amount || unsharp_amount < min_amount) break; |
| unsharp(cpi, source, blurred, sharpened, unsharp_amount); |
| approx_vmaf = cal_approx_vmaf(cpi, |
| #if CONFIG_USE_VMAF_RC |
| vmaf_context, vmaf_cal_index, |
| #endif |
| baseline_variance, source, sharpened); |
| |
| loop_count++; |
| } while (approx_vmaf > best_vmaf && loop_count < max_loop_count); |
| unsharp_amount = |
| approx_vmaf > best_vmaf ? unsharp_amount : unsharp_amount - step_size; |
| return AOMMIN(max_amount, AOMMAX(unsharp_amount, min_amount)); |
| } |
| |
| static double find_best_frame_unsharp_amount(const AV1_COMP *const cpi, |
| YV12_BUFFER_CONFIG *const source, |
| YV12_BUFFER_CONFIG *const blurred, |
| const double unsharp_amount_start, |
| const double step_size, |
| const int max_loop_count, |
| const double max_filter_amount) { |
| const AV1_COMMON *const cm = &cpi->common; |
| const int width = source->y_width; |
| const int height = source->y_height; |
| #if CONFIG_USE_VMAF_RC |
| VmafContext *vmaf_context; |
| aom_init_vmaf_context_rc( |
| &vmaf_context, cpi->vmaf_info.vmaf_model, |
| cpi->oxcf.tune_cfg.tuning == AOM_TUNE_VMAF_NEG_MAX_GAIN); |
| int vmaf_cal_index = 0; |
| #endif |
| YV12_BUFFER_CONFIG sharpened; |
| memset(&sharpened, 0, sizeof(sharpened)); |
| aom_alloc_frame_buffer(&sharpened, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| const double baseline_variance = frame_average_variance(cpi, source); |
| double unsharp_amount; |
| if (unsharp_amount_start <= step_size) { |
| unsharp_amount = find_best_frame_unsharp_amount_loop( |
| cpi, |
| #if CONFIG_USE_VMAF_RC |
| vmaf_context, &vmaf_cal_index, |
| #endif |
| source, blurred, &sharpened, 0.0, baseline_variance, 0.0, step_size, |
| max_loop_count, max_filter_amount); |
| } else { |
| double a0 = unsharp_amount_start - step_size, a1 = unsharp_amount_start; |
| double v0, v1; |
| unsharp(cpi, source, blurred, &sharpened, a0); |
| v0 = cal_approx_vmaf(cpi, |
| #if CONFIG_USE_VMAF_RC |
| vmaf_context, &vmaf_cal_index, |
| #endif |
| baseline_variance, source, &sharpened); |
| unsharp(cpi, source, blurred, &sharpened, a1); |
| v1 = cal_approx_vmaf(cpi, |
| #if CONFIG_USE_VMAF_RC |
| vmaf_context, &vmaf_cal_index, |
| #endif |
| baseline_variance, source, &sharpened); |
| if (fabs(v0 - v1) < 0.01) { |
| unsharp_amount = a0; |
| } else if (v0 > v1) { |
| unsharp_amount = find_best_frame_unsharp_amount_loop( |
| cpi, |
| #if CONFIG_USE_VMAF_RC |
| vmaf_context, &vmaf_cal_index, |
| #endif |
| source, blurred, &sharpened, v0, baseline_variance, a0, -step_size, |
| max_loop_count, max_filter_amount); |
| } else { |
| unsharp_amount = find_best_frame_unsharp_amount_loop( |
| cpi, |
| #if CONFIG_USE_VMAF_RC |
| vmaf_context, &vmaf_cal_index, |
| #endif |
| source, blurred, &sharpened, v1, baseline_variance, a1, step_size, |
| max_loop_count, max_filter_amount); |
| } |
| } |
| |
| aom_free_frame_buffer(&sharpened); |
| #if CONFIG_USE_VMAF_RC |
| aom_close_vmaf_context_rc(vmaf_context); |
| #endif |
| return unsharp_amount; |
| } |
| |
| #if CONFIG_USE_VMAF_RC |
| void av1_vmaf_neg_preprocessing(AV1_COMP *const cpi, |
| YV12_BUFFER_CONFIG *const source) { |
| aom_clear_system_state(); |
| const AV1_COMMON *const cm = &cpi->common; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| const int width = source->y_width; |
| const int height = source->y_height; |
| |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| const int layer_depth = |
| AOMMIN(gf_group->layer_depth[gf_group->index], MAX_ARF_LAYERS - 1); |
| const double best_frame_unsharp_amount = |
| get_layer_value(cpi->vmaf_info.best_unsharp_amount, layer_depth); |
| |
| if (best_frame_unsharp_amount <= 0.0) return; |
| |
| YV12_BUFFER_CONFIG blurred; |
| memset(&blurred, 0, sizeof(blurred)); |
| aom_alloc_frame_buffer(&blurred, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| gaussian_blur(bit_depth, source, &blurred); |
| unsharp(cpi, source, &blurred, source, best_frame_unsharp_amount); |
| aom_free_frame_buffer(&blurred); |
| aom_clear_system_state(); |
| } |
| #endif |
| |
| void av1_vmaf_frame_preprocessing(AV1_COMP *const cpi, |
| YV12_BUFFER_CONFIG *const source) { |
| aom_clear_system_state(); |
| const AV1_COMMON *const cm = &cpi->common; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| const int width = source->y_width; |
| const int height = source->y_height; |
| |
| YV12_BUFFER_CONFIG source_extended, blurred; |
| memset(&source_extended, 0, sizeof(source_extended)); |
| memset(&blurred, 0, sizeof(blurred)); |
| aom_alloc_frame_buffer(&source_extended, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&blurred, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| av1_copy_and_extend_frame(source, &source_extended); |
| gaussian_blur(bit_depth, &source_extended, &blurred); |
| aom_free_frame_buffer(&source_extended); |
| |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| const int layer_depth = |
| AOMMIN(gf_group->layer_depth[gf_group->index], MAX_ARF_LAYERS - 1); |
| const double last_frame_unsharp_amount = |
| get_layer_value(cpi->vmaf_info.last_frame_unsharp_amount, layer_depth); |
| |
| const double best_frame_unsharp_amount = find_best_frame_unsharp_amount( |
| cpi, source, &blurred, last_frame_unsharp_amount, 0.05, 20, 1.01); |
| |
| cpi->vmaf_info.last_frame_unsharp_amount[layer_depth] = |
| best_frame_unsharp_amount; |
| |
| unsharp(cpi, source, &blurred, source, best_frame_unsharp_amount); |
| aom_free_frame_buffer(&blurred); |
| aom_clear_system_state(); |
| } |
| |
| void av1_vmaf_blk_preprocessing(AV1_COMP *const cpi, |
| YV12_BUFFER_CONFIG *const source) { |
| aom_clear_system_state(); |
| const AV1_COMMON *const cm = &cpi->common; |
| const int width = source->y_width; |
| const int height = source->y_height; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| |
| YV12_BUFFER_CONFIG source_extended, blurred; |
| memset(&blurred, 0, sizeof(blurred)); |
| memset(&source_extended, 0, sizeof(source_extended)); |
| aom_alloc_frame_buffer(&blurred, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&source_extended, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| av1_copy_and_extend_frame(source, &source_extended); |
| gaussian_blur(bit_depth, &source_extended, &blurred); |
| aom_free_frame_buffer(&source_extended); |
| |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| const int layer_depth = |
| AOMMIN(gf_group->layer_depth[gf_group->index], MAX_ARF_LAYERS - 1); |
| const double last_frame_unsharp_amount = |
| get_layer_value(cpi->vmaf_info.last_frame_unsharp_amount, layer_depth); |
| |
| const double best_frame_unsharp_amount = find_best_frame_unsharp_amount( |
| cpi, source, &blurred, last_frame_unsharp_amount, 0.05, 20, 1.01); |
| |
| cpi->vmaf_info.last_frame_unsharp_amount[layer_depth] = |
| best_frame_unsharp_amount; |
| |
| const int block_size = BLOCK_64X64; |
| const int block_w = mi_size_wide[block_size] * 4; |
| const int block_h = mi_size_high[block_size] * 4; |
| const int num_cols = (source->y_width + block_w - 1) / block_w; |
| const int num_rows = (source->y_height + block_h - 1) / block_h; |
| double *best_unsharp_amounts = |
| aom_malloc(sizeof(*best_unsharp_amounts) * num_cols * num_rows); |
| memset(best_unsharp_amounts, 0, |
| sizeof(*best_unsharp_amounts) * num_cols * num_rows); |
| |
| YV12_BUFFER_CONFIG source_block, blurred_block; |
| memset(&source_block, 0, sizeof(source_block)); |
| memset(&blurred_block, 0, sizeof(blurred_block)); |
| aom_alloc_frame_buffer(&source_block, block_w, block_h, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&blurred_block, block_w, block_h, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| for (int row = 0; row < num_rows; ++row) { |
| for (int col = 0; col < num_cols; ++col) { |
| const int row_offset_y = row * block_h; |
| const int col_offset_y = col * block_w; |
| const int block_width = AOMMIN(width - col_offset_y, block_w); |
| const int block_height = AOMMIN(height - row_offset_y, block_h); |
| const int index = col + row * num_cols; |
| |
| uint16_t *frame_src_buf = |
| source->y_buffer + row_offset_y * source->y_stride + col_offset_y; |
| uint16_t *frame_blurred_buf = |
| blurred.y_buffer + row_offset_y * blurred.y_stride + col_offset_y; |
| uint16_t *blurred_dst = blurred_block.y_buffer; |
| uint16_t *src_dst = source_block.y_buffer; |
| |
| // Copy block from source frame. |
| for (int i = 0; i < block_h; ++i) { |
| for (int j = 0; j < block_w; ++j) { |
| if (i >= block_height || j >= block_width) { |
| src_dst[j] = 0; |
| blurred_dst[j] = 0; |
| } else { |
| src_dst[j] = frame_src_buf[j]; |
| blurred_dst[j] = frame_blurred_buf[j]; |
| } |
| } |
| frame_src_buf += source->y_stride; |
| frame_blurred_buf += blurred.y_stride; |
| src_dst += source_block.y_stride; |
| blurred_dst += blurred_block.y_stride; |
| } |
| |
| best_unsharp_amounts[index] = find_best_frame_unsharp_amount( |
| cpi, &source_block, &blurred_block, best_frame_unsharp_amount, 0.1, 3, |
| 1.5); |
| } |
| } |
| |
| // Apply best blur amounts |
| for (int row = 0; row < num_rows; ++row) { |
| for (int col = 0; col < num_cols; ++col) { |
| const int row_offset_y = row * block_h; |
| const int col_offset_y = col * block_w; |
| const int block_width = AOMMIN(source->y_width - col_offset_y, block_w); |
| const int block_height = AOMMIN(source->y_height - row_offset_y, block_h); |
| const int index = col + row * num_cols; |
| |
| uint16_t *src_buf = |
| source->y_buffer + row_offset_y * source->y_stride + col_offset_y; |
| uint16_t *blurred_buf = |
| blurred.y_buffer + row_offset_y * blurred.y_stride + col_offset_y; |
| highbd_unsharp_rect(src_buf, source->y_stride, blurred_buf, |
| blurred.y_stride, src_buf, source->y_stride, |
| block_width, block_height, |
| best_unsharp_amounts[index], bit_depth); |
| } |
| } |
| |
| aom_free_frame_buffer(&source_block); |
| aom_free_frame_buffer(&blurred_block); |
| aom_free_frame_buffer(&blurred); |
| aom_free(best_unsharp_amounts); |
| aom_clear_system_state(); |
| } |
| |
| #if !CONFIG_USE_VMAF_RC |
| typedef struct FrameData { |
| const YV12_BUFFER_CONFIG *source, *blurred; |
| int block_w, block_h, num_rows, num_cols, row, col, bit_depth; |
| } FrameData; |
| |
| // A callback function used to pass data to VMAF. |
| // Returns 0 after reading a frame. |
| // Returns 2 when there is no more frame to read. |
| static int update_frame(float *ref_data, float *main_data, float *temp_data, |
| int stride, void *user_data) { |
| FrameData *frames = (FrameData *)user_data; |
| const int width = frames->source->y_width; |
| const int height = frames->source->y_height; |
| const int row = frames->row; |
| const int col = frames->col; |
| const int num_rows = frames->num_rows; |
| const int num_cols = frames->num_cols; |
| const int block_w = frames->block_w; |
| const int block_h = frames->block_h; |
| const YV12_BUFFER_CONFIG *source = frames->source; |
| const YV12_BUFFER_CONFIG *blurred = frames->blurred; |
| const int bit_depth = frames->bit_depth; |
| const float scale_factor = 1.0f / (float)(1 << (bit_depth - 8)); |
| (void)temp_data; |
| stride /= (int)sizeof(*ref_data); |
| |
| for (int i = 0; i < height; ++i) { |
| float *ref, *main; |
| ref = ref_data + i * stride; |
| main = main_data + i * stride; |
| uint16_t *src = source->y_buffer + i * source->y_stride; |
| for (int j = 0; j < width; ++j) { |
| ref[j] = main[j] = scale_factor * (float)src[j]; |
| } |
| } |
| if (row < num_rows && col < num_cols) { |
| // Set current block |
| const int row_offset = row * block_h; |
| const int col_offset = col * block_w; |
| const int block_width = AOMMIN(width - col_offset, block_w); |
| const int block_height = AOMMIN(height - row_offset, block_h); |
| |
| float *main_buf = main_data + col_offset + row_offset * stride; |
| uint16_t *blurred_buf = |
| blurred->y_buffer + row_offset * blurred->y_stride + col_offset; |
| for (int i = 0; i < block_height; ++i) { |
| for (int j = 0; j < block_width; ++j) { |
| main_buf[j] = scale_factor * (float)blurred_buf[j]; |
| } |
| main_buf += stride; |
| blurred_buf += blurred->y_stride; |
| } |
| |
| frames->col++; |
| if (frames->col >= num_cols) { |
| frames->col = 0; |
| frames->row++; |
| } |
| return 0; |
| } else { |
| return 2; |
| } |
| } |
| #endif |
| |
| void av1_set_mb_vmaf_rdmult_scaling(AV1_COMP *cpi) { |
| AV1_COMMON *cm = &cpi->common; |
| const int y_width = cpi->source->y_width; |
| const int y_height = cpi->source->y_height; |
| const int resized_block_size = BLOCK_32X32; |
| const int resize_factor = 2; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| |
| aom_clear_system_state(); |
| YV12_BUFFER_CONFIG resized_source; |
| memset(&resized_source, 0, sizeof(resized_source)); |
| aom_alloc_frame_buffer( |
| &resized_source, y_width / resize_factor, y_height / resize_factor, 1, 1, |
| cpi->oxcf.border_in_pixels, cm->features.byte_alignment, false); |
| av1_resize_and_extend_frame_nonnormative(cpi->source, &resized_source, |
| bit_depth, av1_num_planes(cm)); |
| |
| const int resized_y_width = resized_source.y_width; |
| const int resized_y_height = resized_source.y_height; |
| const int resized_block_w = mi_size_wide[resized_block_size] * 4; |
| const int resized_block_h = mi_size_high[resized_block_size] * 4; |
| const int num_cols = |
| (resized_y_width + resized_block_w - 1) / resized_block_w; |
| const int num_rows = |
| (resized_y_height + resized_block_h - 1) / resized_block_h; |
| |
| YV12_BUFFER_CONFIG blurred; |
| memset(&blurred, 0, sizeof(blurred)); |
| aom_alloc_frame_buffer(&blurred, resized_y_width, resized_y_height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| gaussian_blur(bit_depth, &resized_source, &blurred); |
| |
| #if CONFIG_USE_VMAF_RC |
| YV12_BUFFER_CONFIG recon; |
| memset(&recon, 0, sizeof(recon)); |
| aom_alloc_frame_buffer(&recon, resized_y_width, resized_y_height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_yv12_copy_frame(&resized_source, &recon, 1); |
| |
| VmafContext *vmaf_context; |
| aom_init_vmaf_context_rc( |
| &vmaf_context, cpi->vmaf_info.vmaf_model, |
| cpi->oxcf.tune_cfg.tuning == AOM_TUNE_VMAF_NEG_MAX_GAIN); |
| #else |
| double *scores = aom_malloc(sizeof(*scores) * (num_rows * num_cols)); |
| memset(scores, 0, sizeof(*scores) * (num_rows * num_cols)); |
| FrameData frame_data; |
| frame_data.source = &resized_source; |
| frame_data.blurred = &blurred; |
| frame_data.block_w = resized_block_w; |
| frame_data.block_h = resized_block_h; |
| frame_data.num_rows = num_rows; |
| frame_data.num_cols = num_cols; |
| frame_data.row = 0; |
| frame_data.col = 0; |
| frame_data.bit_depth = bit_depth; |
| aom_calc_vmaf_multi_frame(&frame_data, cpi->oxcf.tune_cfg.vmaf_model_path, |
| update_frame, resized_y_width, resized_y_height, |
| bit_depth, scores); |
| #endif |
| |
| // Loop through each 'block_size' block. |
| for (int row = 0; row < num_rows; ++row) { |
| for (int col = 0; col < num_cols; ++col) { |
| const int index = row * num_cols + col; |
| const int row_offset_y = row * resized_block_h; |
| const int col_offset_y = col * resized_block_w; |
| |
| uint16_t *const orig_buf = resized_source.y_buffer + |
| row_offset_y * resized_source.y_stride + |
| col_offset_y; |
| uint16_t *const blurred_buf = |
| blurred.y_buffer + row_offset_y * blurred.y_stride + col_offset_y; |
| |
| unsigned int sse; |
| cpi->fn_ptr[resized_block_size].vf(orig_buf, resized_source.y_stride, |
| blurred_buf, blurred.y_stride, &sse); |
| |
| #if CONFIG_USE_VMAF_RC |
| uint16_t *const recon_buf = |
| recon.y_buffer + row_offset_y * recon.y_stride + col_offset_y; |
| // Set recon buf |
| highbd_unsharp_rect(blurred_buf, blurred.y_stride, blurred_buf, |
| blurred.y_stride, recon_buf, recon.y_stride, |
| resized_block_w, resized_block_h, 0.0, bit_depth); |
| |
| double vmaf; |
| aom_calc_vmaf_at_index_rc(vmaf_context, cpi->vmaf_info.vmaf_model, |
| &resized_source, &recon, bit_depth, index, |
| &vmaf); |
| |
| // Restore recon buf |
| highbd_unsharp_rect(orig_buf, resized_source.y_stride, orig_buf, |
| resized_source.y_stride, recon_buf, recon.y_stride, |
| resized_block_w, resized_block_h, 0.0, bit_depth); |
| #else |
| const double vmaf = scores[index]; |
| #endif |
| const double dvmaf = kBaselineVmaf - vmaf; |
| |
| const double mse = |
| (double)sse / (double)(resized_y_width * resized_y_height); |
| double weight; |
| const double eps = 0.01 / (num_rows * num_cols); |
| if (dvmaf < eps || mse < eps) { |
| weight = 1.0; |
| } else { |
| weight = mse / dvmaf; |
| } |
| |
| // Normalize it with a data fitted model. |
| weight = 6.0 * (1.0 - exp(-0.05 * weight)) + 0.8; |
| cpi->vmaf_info.rdmult_scaling_factors[index] = weight; |
| } |
| } |
| |
| aom_free_frame_buffer(&resized_source); |
| aom_free_frame_buffer(&blurred); |
| #if CONFIG_USE_VMAF_RC |
| aom_close_vmaf_context_rc(vmaf_context); |
| #else |
| aom_free(scores); |
| #endif |
| aom_clear_system_state(); |
| } |
| |
| void av1_set_vmaf_rdmult(const AV1_COMP *const cpi, MACROBLOCK *const x, |
| const BLOCK_SIZE bsize, const int mi_row, |
| const int mi_col, int *const rdmult) { |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| const int bsize_base = BLOCK_64X64; |
| const int num_mi_w = mi_size_wide[bsize_base]; |
| const int num_mi_h = mi_size_high[bsize_base]; |
| const int num_cols = (cm->mi_params.mi_cols + num_mi_w - 1) / num_mi_w; |
| const int num_rows = (cm->mi_params.mi_rows + num_mi_h - 1) / num_mi_h; |
| const int num_bcols = (mi_size_wide[bsize] + num_mi_w - 1) / num_mi_w; |
| const int num_brows = (mi_size_high[bsize] + num_mi_h - 1) / num_mi_h; |
| int row, col; |
| double num_of_mi = 0.0; |
| double geom_mean_of_scale = 0.0; |
| |
| aom_clear_system_state(); |
| for (row = mi_row / num_mi_w; |
| row < num_rows && row < mi_row / num_mi_w + num_brows; ++row) { |
| for (col = mi_col / num_mi_h; |
| col < num_cols && col < mi_col / num_mi_h + num_bcols; ++col) { |
| const int index = row * num_cols + col; |
| geom_mean_of_scale += log(cpi->vmaf_info.rdmult_scaling_factors[index]); |
| num_of_mi += 1.0; |
| } |
| } |
| geom_mean_of_scale = exp(geom_mean_of_scale / num_of_mi); |
| |
| *rdmult = (int)((double)(*rdmult) * geom_mean_of_scale + 0.5); |
| *rdmult = AOMMAX(*rdmult, 0); |
| av1_set_error_per_bit(&x->mv_costs, *rdmult); |
| aom_clear_system_state(); |
| } |
| |
| // TODO(sdeng): replace them with the SIMD versions. |
| static AOM_INLINE double highbd_image_sad_c(const uint16_t *src, int src_stride, |
| const uint16_t *ref, int ref_stride, |
| int w, int h) { |
| double accum = 0.0; |
| int i, j; |
| |
| for (i = 0; i < h; ++i) { |
| for (j = 0; j < w; ++j) { |
| double img1px = src[i * src_stride + j]; |
| double img2px = ref[i * ref_stride + j]; |
| |
| accum += fabs(img1px - img2px); |
| } |
| } |
| |
| return accum / (double)(h * w); |
| } |
| |
| static double calc_vmaf_motion_score(const AV1_COMP *const cpi, |
| const AV1_COMMON *const cm, |
| const YV12_BUFFER_CONFIG *const cur, |
| const YV12_BUFFER_CONFIG *const last, |
| const YV12_BUFFER_CONFIG *const next) { |
| const int y_width = cur->y_width; |
| const int y_height = cur->y_height; |
| YV12_BUFFER_CONFIG blurred_cur, blurred_last, blurred_next; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| |
| memset(&blurred_cur, 0, sizeof(blurred_cur)); |
| memset(&blurred_last, 0, sizeof(blurred_last)); |
| memset(&blurred_next, 0, sizeof(blurred_next)); |
| |
| aom_alloc_frame_buffer(&blurred_cur, y_width, y_height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&blurred_last, y_width, y_height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&blurred_next, y_width, y_height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| gaussian_blur(bit_depth, cur, &blurred_cur); |
| gaussian_blur(bit_depth, last, &blurred_last); |
| if (next) gaussian_blur(bit_depth, next, &blurred_next); |
| |
| double motion1, motion2 = 65536.0; |
| const float scale_factor = 1.0f / (float)(1 << (bit_depth - 8)); |
| motion1 = highbd_image_sad_c(blurred_cur.y_buffer, blurred_cur.y_stride, |
| blurred_last.y_buffer, blurred_last.y_stride, |
| y_width, y_height) * |
| scale_factor; |
| if (next) { |
| motion2 = highbd_image_sad_c(blurred_cur.y_buffer, blurred_cur.y_stride, |
| blurred_next.y_buffer, blurred_next.y_stride, |
| y_width, y_height) * |
| scale_factor; |
| } |
| |
| aom_free_frame_buffer(&blurred_cur); |
| aom_free_frame_buffer(&blurred_last); |
| aom_free_frame_buffer(&blurred_next); |
| |
| return AOMMIN(motion1, motion2); |
| } |
| |
| static AOM_INLINE void get_neighbor_frames(const AV1_COMP *const cpi, |
| YV12_BUFFER_CONFIG **last, |
| YV12_BUFFER_CONFIG **next) { |
| const AV1_COMMON *const cm = &cpi->common; |
| const GF_GROUP *gf_group = &cpi->gf_group; |
| const int src_index = |
| cm->show_frame != 0 ? 0 : gf_group->arf_src_offset[gf_group->index]; |
| struct lookahead_entry *last_entry = |
| av1_lookahead_peek(cpi->lookahead, src_index - 1, cpi->compressor_stage); |
| struct lookahead_entry *next_entry = |
| av1_lookahead_peek(cpi->lookahead, src_index + 1, cpi->compressor_stage); |
| *next = &next_entry->img; |
| *last = cm->show_frame ? cpi->last_source : &last_entry->img; |
| } |
| |
| // Calculates the new qindex from the VMAF motion score. This is based on the |
| // observation: when the motion score becomes higher, the VMAF score of the |
| // same source and distorted frames would become higher. |
| int av1_get_vmaf_base_qindex(const AV1_COMP *const cpi, int current_qindex) { |
| const AV1_COMMON *const cm = &cpi->common; |
| if (cm->current_frame.frame_number == 0 || cpi->oxcf.pass == 1) { |
| return current_qindex; |
| } |
| aom_clear_system_state(); |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| const int layer_depth = |
| AOMMIN(gf_group->layer_depth[gf_group->index], MAX_ARF_LAYERS - 1); |
| const double last_frame_ysse = |
| get_layer_value(cpi->vmaf_info.last_frame_ysse, layer_depth); |
| const double last_frame_vmaf = |
| get_layer_value(cpi->vmaf_info.last_frame_vmaf, layer_depth); |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| const double approx_sse = last_frame_ysse / (double)((1 << (bit_depth - 8)) * |
| (1 << (bit_depth - 8))); |
| const double approx_dvmaf = kBaselineVmaf - last_frame_vmaf; |
| const double sse_threshold = |
| 0.01 * cpi->source->y_width * cpi->source->y_height; |
| const double vmaf_threshold = 0.01; |
| if (approx_sse < sse_threshold || approx_dvmaf < vmaf_threshold) { |
| return current_qindex; |
| } |
| YV12_BUFFER_CONFIG *cur_buf = cpi->source; |
| if (cm->show_frame == 0) { |
| const int src_index = gf_group->arf_src_offset[gf_group->index]; |
| struct lookahead_entry *cur_entry = |
| av1_lookahead_peek(cpi->lookahead, src_index, cpi->compressor_stage); |
| cur_buf = &cur_entry->img; |
| } |
| assert(cur_buf); |
| |
| YV12_BUFFER_CONFIG *next_buf, *last_buf; |
| get_neighbor_frames(cpi, &last_buf, &next_buf); |
| assert(last_buf); |
| |
| const double motion = |
| calc_vmaf_motion_score(cpi, cm, cur_buf, last_buf, next_buf); |
| |
| // Get dVMAF through a data fitted model. |
| const double dvmaf = 26.11 * (1.0 - exp(-0.06 * motion)); |
| const double dsse = dvmaf * approx_sse / approx_dvmaf; |
| |
| const double beta = approx_sse / (dsse + approx_sse); |
| const int offset = av1_get_deltaq_offset(cpi, current_qindex, beta); |
| int qindex = current_qindex + offset; |
| |
| qindex = AOMMIN(qindex, MAXQ); |
| qindex = AOMMAX(qindex, MINQ); |
| |
| aom_clear_system_state(); |
| return qindex; |
| } |
| |
| #if CONFIG_USE_VMAF_RC |
| static AOM_INLINE double cal_approx_score( |
| AV1_COMP *const cpi, VmafContext *vmaf_context, int vmaf_cal_index, |
| double src_variance, double new_variance, double src_score, |
| YV12_BUFFER_CONFIG *const src, YV12_BUFFER_CONFIG *const recon_sharpened) { |
| double score; |
| const uint32_t bit_depth = cpi->td.mb.e_mbd.bd; |
| aom_calc_vmaf_at_index_rc(vmaf_context, cpi->vmaf_info.vmaf_model, src, |
| recon_sharpened, bit_depth, vmaf_cal_index, &score); |
| return src_variance / new_variance * (score - src_score); |
| } |
| |
| static double find_best_frame_unsharp_amount_loop_neg( |
| AV1_COMP *const cpi, VmafContext *vmaf_context, double src_variance, |
| double base_score, YV12_BUFFER_CONFIG *const src, |
| YV12_BUFFER_CONFIG *const recon, YV12_BUFFER_CONFIG *const ref, |
| FULLPEL_MV *mvs, double best_score, const double unsharp_amount_start, |
| const double step_size, const int max_loop_count, const double max_amount) { |
| const double min_amount = 0.0; |
| int loop_count = 0; |
| double approx_score = best_score; |
| double unsharp_amount = unsharp_amount_start; |
| int vmaf_cal_index = 2; |
| |
| const AV1_COMMON *const cm = &cpi->common; |
| const int width = recon->y_width; |
| const int height = recon->y_height; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| YV12_BUFFER_CONFIG src_blurred, recon_blurred, src_sharpened, recon_sharpened; |
| memset(&recon_sharpened, 0, sizeof(recon_sharpened)); |
| memset(&src_sharpened, 0, sizeof(src_sharpened)); |
| memset(&recon_blurred, 0, sizeof(recon_blurred)); |
| memset(&src_blurred, 0, sizeof(src_blurred)); |
| aom_alloc_frame_buffer(&recon_sharpened, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&src_sharpened, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&recon_blurred, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| aom_alloc_frame_buffer(&src_blurred, width, height, 1, 1, |
| cpi->oxcf.border_in_pixels, |
| cm->features.byte_alignment, false); |
| |
| gaussian_blur(bit_depth, recon, &recon_blurred); |
| gaussian_blur(bit_depth, src, &src_blurred); |
| do { |
| best_score = approx_score; |
| unsharp_amount += step_size; |
| if (unsharp_amount > max_amount || unsharp_amount < min_amount) break; |
| unsharp(cpi, recon, &recon_blurred, &recon_sharpened, unsharp_amount); |
| unsharp(cpi, src, &src_blurred, &src_sharpened, unsharp_amount); |
| const double new_variance = |
| residual_frame_average_variance(cpi, &src_sharpened, ref, mvs); |
| approx_score = |
| cal_approx_score(cpi, vmaf_context, vmaf_cal_index++, src_variance, |
| new_variance, base_score, src, &recon_sharpened); |
| |
| loop_count++; |
| } while (approx_score > best_score && loop_count < max_loop_count); |
| unsharp_amount = |
| approx_score > best_score ? unsharp_amount : unsharp_amount - step_size; |
| |
| aom_free_frame_buffer(&recon_sharpened); |
| aom_free_frame_buffer(&src_sharpened); |
| aom_free_frame_buffer(&recon_blurred); |
| aom_free_frame_buffer(&src_blurred); |
| return AOMMIN(max_amount, AOMMAX(unsharp_amount, min_amount)); |
| } |
| |
| static double find_best_frame_unsharp_amount_neg( |
| AV1_COMP *const cpi, VmafContext *vmaf_context, |
| YV12_BUFFER_CONFIG *const src, YV12_BUFFER_CONFIG *const recon, |
| YV12_BUFFER_CONFIG *const ref, const double unsharp_amount_start, |
| const double step_size, const int max_loop_count, |
| const double max_filter_amount) { |
| double base_score = 0.0; |
| aom_calc_vmaf_at_index_rc(vmaf_context, cpi->vmaf_info.vmaf_model, src, recon, |
| cpi->td.mb.e_mbd.bd, 1, &base_score); |
| |
| FULLPEL_MV *mvs = NULL; |
| const double src_variance = |
| residual_frame_average_variance(cpi, src, ref, mvs); |
| const double unsharp_amount = find_best_frame_unsharp_amount_loop_neg( |
| cpi, vmaf_context, src_variance, base_score, src, recon, ref, mvs, 0.0, |
| unsharp_amount_start, step_size, max_loop_count, max_filter_amount); |
| |
| aom_free(mvs); |
| return unsharp_amount; |
| } |
| #endif // CONFIG_USE_VMAF_RC |
| |
| void av1_update_vmaf_curve(AV1_COMP *cpi) { |
| YV12_BUFFER_CONFIG *source = cpi->source; |
| YV12_BUFFER_CONFIG *recon = &cpi->common.cur_frame->buf; |
| const int bit_depth = cpi->td.mb.e_mbd.bd; |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| const int layer_depth = |
| AOMMIN(gf_group->layer_depth[gf_group->index], MAX_ARF_LAYERS - 1); |
| #if CONFIG_USE_VMAF_RC |
| VmafContext *vmaf_context; |
| aom_init_vmaf_context_rc( |
| &vmaf_context, cpi->vmaf_info.vmaf_model, |
| cpi->oxcf.tune_cfg.tuning == AOM_TUNE_VMAF_NEG_MAX_GAIN); |
| aom_calc_vmaf_at_index_rc(vmaf_context, cpi->vmaf_info.vmaf_model, source, |
| recon, bit_depth, 0, |
| &cpi->vmaf_info.last_frame_vmaf[layer_depth]); |
| #else |
| aom_calc_vmaf(cpi->oxcf.tune_cfg.vmaf_model_path, source, recon, bit_depth, |
| &cpi->vmaf_info.last_frame_vmaf[layer_depth]); |
| #endif // CONFIG_USE_VMAF_RC |
| cpi->vmaf_info.last_frame_ysse[layer_depth] = |
| (double)aom_highbd_get_y_sse(source, recon); |
| |
| #if CONFIG_USE_VMAF_RC |
| if (cpi->oxcf.tune_cfg.tuning == AOM_TUNE_VMAF_NEG_MAX_GAIN) { |
| YV12_BUFFER_CONFIG *last, *next; |
| get_neighbor_frames(cpi, &last, &next); |
| cpi->vmaf_info.best_unsharp_amount[layer_depth] = |
| find_best_frame_unsharp_amount_neg(cpi, vmaf_context, source, recon, |
| last, 0.0, 0.025, 20, 1.01); |
| } |
| aom_close_vmaf_context_rc(vmaf_context); |
| #endif // CONFIG_USE_VMAF_RC |
| } |