| /* | 
 |  * | 
 |  * Copyright (c) 2020, Alliance for Open Media. All rights reserved | 
 |  * | 
 |  * This source code is subject to the terms of the BSD 2 Clause License and | 
 |  * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
 |  * was not distributed with this source code in the LICENSE file, you can | 
 |  * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
 |  * Media Patent License 1.0 was not distributed with this source code in the | 
 |  * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
 |  */ | 
 | #include <arm_neon.h> | 
 | #include <assert.h> | 
 |  | 
 | #include "av1/common/resize.h" | 
 | #include "av1/common/arm/mem_neon.h" | 
 | #include "av1/common/arm/transpose_neon.h" | 
 | #include "config/av1_rtcd.h" | 
 | #include "config/aom_scale_rtcd.h" | 
 |  | 
 | static INLINE uint8x8_t convolve8_8(const int16x8_t s0, const int16x8_t s1, | 
 |                                     const int16x8_t s2, const int16x8_t s3, | 
 |                                     const int16x8_t s4, const int16x8_t s5, | 
 |                                     const int16x8_t s6, const int16x8_t s7, | 
 |                                     const int16x8_t filters, | 
 |                                     const int16x8_t filter3, | 
 |                                     const int16x8_t filter4) { | 
 |   const int16x4_t filters_lo = vget_low_s16(filters); | 
 |   const int16x4_t filters_hi = vget_high_s16(filters); | 
 |   int16x8_t sum; | 
 |  | 
 |   sum = vmulq_lane_s16(s0, filters_lo, 0); | 
 |   sum = vmlaq_lane_s16(sum, s1, filters_lo, 1); | 
 |   sum = vmlaq_lane_s16(sum, s2, filters_lo, 2); | 
 |   sum = vmlaq_lane_s16(sum, s5, filters_hi, 1); | 
 |   sum = vmlaq_lane_s16(sum, s6, filters_hi, 2); | 
 |   sum = vmlaq_lane_s16(sum, s7, filters_hi, 3); | 
 |   sum = vqaddq_s16(sum, vmulq_s16(s3, filter3)); | 
 |   sum = vqaddq_s16(sum, vmulq_s16(s4, filter4)); | 
 |   return vqrshrun_n_s16(sum, 7); | 
 | } | 
 |  | 
 | static INLINE uint8x8_t scale_filter_8(const uint8x8_t *const s, | 
 |                                        const int16x8_t filters) { | 
 |   const int16x8_t filter3 = vdupq_lane_s16(vget_low_s16(filters), 3); | 
 |   const int16x8_t filter4 = vdupq_lane_s16(vget_high_s16(filters), 0); | 
 |   int16x8_t ss[8]; | 
 |  | 
 |   ss[0] = vreinterpretq_s16_u16(vmovl_u8(s[0])); | 
 |   ss[1] = vreinterpretq_s16_u16(vmovl_u8(s[1])); | 
 |   ss[2] = vreinterpretq_s16_u16(vmovl_u8(s[2])); | 
 |   ss[3] = vreinterpretq_s16_u16(vmovl_u8(s[3])); | 
 |   ss[4] = vreinterpretq_s16_u16(vmovl_u8(s[4])); | 
 |   ss[5] = vreinterpretq_s16_u16(vmovl_u8(s[5])); | 
 |   ss[6] = vreinterpretq_s16_u16(vmovl_u8(s[6])); | 
 |   ss[7] = vreinterpretq_s16_u16(vmovl_u8(s[7])); | 
 |  | 
 |   return convolve8_8(ss[0], ss[1], ss[2], ss[3], ss[4], ss[5], ss[6], ss[7], | 
 |                      filters, filter3, filter4); | 
 | } | 
 |  | 
 | static INLINE void scale_plane_2_to_1_phase_0(const uint8_t *src, | 
 |                                               const int src_stride, | 
 |                                               uint8_t *dst, | 
 |                                               const int dst_stride, const int w, | 
 |                                               const int h) { | 
 |   const int max_width = (w + 15) & ~15; | 
 |   int y = h; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   do { | 
 |     int x = max_width; | 
 |     do { | 
 |       const uint8x16x2_t s = vld2q_u8(src); | 
 |       vst1q_u8(dst, s.val[0]); | 
 |       src += 32; | 
 |       dst += 16; | 
 |       x -= 16; | 
 |     } while (x); | 
 |     src += 2 * (src_stride - max_width); | 
 |     dst += dst_stride - max_width; | 
 |   } while (--y); | 
 | } | 
 |  | 
 | static INLINE void scale_plane_4_to_1_phase_0(const uint8_t *src, | 
 |                                               const int src_stride, | 
 |                                               uint8_t *dst, | 
 |                                               const int dst_stride, const int w, | 
 |                                               const int h) { | 
 |   const int max_width = (w + 15) & ~15; | 
 |   int y = h; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   do { | 
 |     int x = max_width; | 
 |     do { | 
 |       const uint8x16x4_t s = vld4q_u8(src); | 
 |       vst1q_u8(dst, s.val[0]); | 
 |       src += 64; | 
 |       dst += 16; | 
 |       x -= 16; | 
 |     } while (x); | 
 |     src += 4 * (src_stride - max_width); | 
 |     dst += dst_stride - max_width; | 
 |   } while (--y); | 
 | } | 
 |  | 
 | static INLINE void scale_plane_bilinear_kernel( | 
 |     const uint8x16_t in0, const uint8x16_t in1, const uint8x16_t in2, | 
 |     const uint8x16_t in3, const uint8x8_t coef0, const uint8x8_t coef1, | 
 |     uint8_t *const dst) { | 
 |   const uint16x8_t h0 = vmull_u8(vget_low_u8(in0), coef0); | 
 |   const uint16x8_t h1 = vmull_u8(vget_high_u8(in0), coef0); | 
 |   const uint16x8_t h2 = vmull_u8(vget_low_u8(in2), coef0); | 
 |   const uint16x8_t h3 = vmull_u8(vget_high_u8(in2), coef0); | 
 |   const uint16x8_t h4 = vmlal_u8(h0, vget_low_u8(in1), coef1); | 
 |   const uint16x8_t h5 = vmlal_u8(h1, vget_high_u8(in1), coef1); | 
 |   const uint16x8_t h6 = vmlal_u8(h2, vget_low_u8(in3), coef1); | 
 |   const uint16x8_t h7 = vmlal_u8(h3, vget_high_u8(in3), coef1); | 
 |  | 
 |   const uint8x8_t hor0 = vrshrn_n_u16(h4, 7);  // temp: 00 01 02 03 04 05 06 07 | 
 |   const uint8x8_t hor1 = vrshrn_n_u16(h5, 7);  // temp: 08 09 0A 0B 0C 0D 0E 0F | 
 |   const uint8x8_t hor2 = vrshrn_n_u16(h6, 7);  // temp: 10 11 12 13 14 15 16 17 | 
 |   const uint8x8_t hor3 = vrshrn_n_u16(h7, 7);  // temp: 18 19 1A 1B 1C 1D 1E 1F | 
 |   const uint16x8_t v0 = vmull_u8(hor0, coef0); | 
 |   const uint16x8_t v1 = vmull_u8(hor1, coef0); | 
 |   const uint16x8_t v2 = vmlal_u8(v0, hor2, coef1); | 
 |   const uint16x8_t v3 = vmlal_u8(v1, hor3, coef1); | 
 |   // dst: 0 1 2 3 4 5 6 7  8 9 A B C D E F | 
 |   const uint8x16_t d = vcombine_u8(vrshrn_n_u16(v2, 7), vrshrn_n_u16(v3, 7)); | 
 |   vst1q_u8(dst, d); | 
 | } | 
 |  | 
 | static INLINE void scale_plane_2_to_1_bilinear( | 
 |     const uint8_t *const src, const int src_stride, uint8_t *dst, | 
 |     const int dst_stride, const int w, const int h, const int16_t c0, | 
 |     const int16_t c1) { | 
 |   const int max_width = (w + 15) & ~15; | 
 |   const uint8_t *src0 = src; | 
 |   const uint8_t *src1 = src + src_stride; | 
 |   const uint8x8_t coef0 = vdup_n_u8(c0); | 
 |   const uint8x8_t coef1 = vdup_n_u8(c1); | 
 |   int y = h; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   do { | 
 |     int x = max_width; | 
 |     do { | 
 |       // 000 002 004 006 008 00A 00C 00E  010 012 014 016 018 01A 01C 01E | 
 |       // 001 003 005 007 009 00B 00D 00F  011 013 015 017 019 01B 01D 01F | 
 |       const uint8x16x2_t s0 = vld2q_u8(src0); | 
 |       // 100 102 104 106 108 10A 10C 10E  110 112 114 116 118 11A 11C 11E | 
 |       // 101 103 105 107 109 10B 10D 10F  111 113 115 117 119 11B 11D 11F | 
 |       const uint8x16x2_t s1 = vld2q_u8(src1); | 
 |       scale_plane_bilinear_kernel(s0.val[0], s0.val[1], s1.val[0], s1.val[1], | 
 |                                   coef0, coef1, dst); | 
 |       src0 += 32; | 
 |       src1 += 32; | 
 |       dst += 16; | 
 |       x -= 16; | 
 |     } while (x); | 
 |     src0 += 2 * (src_stride - max_width); | 
 |     src1 += 2 * (src_stride - max_width); | 
 |     dst += dst_stride - max_width; | 
 |   } while (--y); | 
 | } | 
 |  | 
 | static INLINE void scale_plane_4_to_1_bilinear( | 
 |     const uint8_t *const src, const int src_stride, uint8_t *dst, | 
 |     const int dst_stride, const int w, const int h, const int16_t c0, | 
 |     const int16_t c1) { | 
 |   const int max_width = (w + 15) & ~15; | 
 |   const uint8_t *src0 = src; | 
 |   const uint8_t *src1 = src + src_stride; | 
 |   const uint8x8_t coef0 = vdup_n_u8(c0); | 
 |   const uint8x8_t coef1 = vdup_n_u8(c1); | 
 |   int y = h; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   do { | 
 |     int x = max_width; | 
 |     do { | 
 |       // (*) -- useless | 
 |       // 000 004 008 00C 010 014 018 01C  020 024 028 02C 030 034 038 03C | 
 |       // 001 005 009 00D 011 015 019 01D  021 025 029 02D 031 035 039 03D | 
 |       // 002 006 00A 00E 012 016 01A 01E  022 026 02A 02E 032 036 03A 03E (*) | 
 |       // 003 007 00B 00F 013 017 01B 01F  023 027 02B 02F 033 037 03B 03F (*) | 
 |       const uint8x16x4_t s0 = vld4q_u8(src0); | 
 |       // 100 104 108 10C 110 114 118 11C  120 124 128 12C 130 134 138 13C | 
 |       // 101 105 109 10D 111 115 119 11D  121 125 129 12D 131 135 139 13D | 
 |       // 102 106 10A 10E 112 116 11A 11E  122 126 12A 12E 132 136 13A 13E (*) | 
 |       // 103 107 10B 10F 113 117 11B 11F  123 127 12B 12F 133 137 13B 13F (*) | 
 |       const uint8x16x4_t s1 = vld4q_u8(src1); | 
 |       scale_plane_bilinear_kernel(s0.val[0], s0.val[1], s1.val[0], s1.val[1], | 
 |                                   coef0, coef1, dst); | 
 |       src0 += 64; | 
 |       src1 += 64; | 
 |       dst += 16; | 
 |       x -= 16; | 
 |     } while (x); | 
 |     src0 += 4 * (src_stride - max_width); | 
 |     src1 += 4 * (src_stride - max_width); | 
 |     dst += dst_stride - max_width; | 
 |   } while (--y); | 
 | } | 
 |  | 
 | static void scale_plane_2_to_1_general(const uint8_t *src, const int src_stride, | 
 |                                        uint8_t *dst, const int dst_stride, | 
 |                                        const int w, const int h, | 
 |                                        const int16_t *const coef, | 
 |                                        uint8_t *const temp_buffer) { | 
 |   const int width_hor = (w + 3) & ~3; | 
 |   const int width_ver = (w + 7) & ~7; | 
 |   const int height_hor = (2 * h + SUBPEL_TAPS - 2 + 7) & ~7; | 
 |   const int height_ver = (h + 3) & ~3; | 
 |   const int16x8_t filters = vld1q_s16(coef); | 
 |   int x, y = height_hor; | 
 |   uint8_t *t = temp_buffer; | 
 |   uint8x8_t s[14], d[4]; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   src -= (SUBPEL_TAPS / 2 - 1) * src_stride + SUBPEL_TAPS / 2 + 1; | 
 |  | 
 |   // horizontal 4x8 | 
 |   // Note: processing 4x8 is about 20% faster than processing row by row using | 
 |   // vld4_u8(). | 
 |   do { | 
 |     load_u8_8x8(src + 2, src_stride, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], | 
 |                 &s[6], &s[7]); | 
 |     transpose_u8_8x8(&s[0], &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], &s[7]); | 
 |     x = width_hor; | 
 |  | 
 |     do { | 
 |       src += 8; | 
 |       load_u8_8x8(src, src_stride, &s[6], &s[7], &s[8], &s[9], &s[10], &s[11], | 
 |                   &s[12], &s[13]); | 
 |       transpose_u8_8x8(&s[6], &s[7], &s[8], &s[9], &s[10], &s[11], &s[12], | 
 |                        &s[13]); | 
 |  | 
 |       d[0] = scale_filter_8(&s[0], filters);  // 00 10 20 30 40 50 60 70 | 
 |       d[1] = scale_filter_8(&s[2], filters);  // 01 11 21 31 41 51 61 71 | 
 |       d[2] = scale_filter_8(&s[4], filters);  // 02 12 22 32 42 52 62 72 | 
 |       d[3] = scale_filter_8(&s[6], filters);  // 03 13 23 33 43 53 63 73 | 
 |       // 00 01 02 03 40 41 42 43 | 
 |       // 10 11 12 13 50 51 52 53 | 
 |       // 20 21 22 23 60 61 62 63 | 
 |       // 30 31 32 33 70 71 72 73 | 
 |       transpose_u8_8x4(&d[0], &d[1], &d[2], &d[3]); | 
 |       vst1_lane_u32((uint32_t *)(t + 0 * width_hor), vreinterpret_u32_u8(d[0]), | 
 |                     0); | 
 |       vst1_lane_u32((uint32_t *)(t + 1 * width_hor), vreinterpret_u32_u8(d[1]), | 
 |                     0); | 
 |       vst1_lane_u32((uint32_t *)(t + 2 * width_hor), vreinterpret_u32_u8(d[2]), | 
 |                     0); | 
 |       vst1_lane_u32((uint32_t *)(t + 3 * width_hor), vreinterpret_u32_u8(d[3]), | 
 |                     0); | 
 |       vst1_lane_u32((uint32_t *)(t + 4 * width_hor), vreinterpret_u32_u8(d[0]), | 
 |                     1); | 
 |       vst1_lane_u32((uint32_t *)(t + 5 * width_hor), vreinterpret_u32_u8(d[1]), | 
 |                     1); | 
 |       vst1_lane_u32((uint32_t *)(t + 6 * width_hor), vreinterpret_u32_u8(d[2]), | 
 |                     1); | 
 |       vst1_lane_u32((uint32_t *)(t + 7 * width_hor), vreinterpret_u32_u8(d[3]), | 
 |                     1); | 
 |  | 
 |       s[0] = s[8]; | 
 |       s[1] = s[9]; | 
 |       s[2] = s[10]; | 
 |       s[3] = s[11]; | 
 |       s[4] = s[12]; | 
 |       s[5] = s[13]; | 
 |  | 
 |       t += 4; | 
 |       x -= 4; | 
 |     } while (x); | 
 |     src += 8 * src_stride - 2 * width_hor; | 
 |     t += 7 * width_hor; | 
 |     y -= 8; | 
 |   } while (y); | 
 |  | 
 |   // vertical 8x4 | 
 |   x = width_ver; | 
 |   t = temp_buffer; | 
 |   do { | 
 |     load_u8_8x8(t, width_hor, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], | 
 |                 &s[7]); | 
 |     t += 6 * width_hor; | 
 |     y = height_ver; | 
 |  | 
 |     do { | 
 |       load_u8_8x8(t, width_hor, &s[6], &s[7], &s[8], &s[9], &s[10], &s[11], | 
 |                   &s[12], &s[13]); | 
 |       t += 8 * width_hor; | 
 |  | 
 |       d[0] = scale_filter_8(&s[0], filters);  // 00 01 02 03 04 05 06 07 | 
 |       d[1] = scale_filter_8(&s[2], filters);  // 10 11 12 13 14 15 16 17 | 
 |       d[2] = scale_filter_8(&s[4], filters);  // 20 21 22 23 24 25 26 27 | 
 |       d[3] = scale_filter_8(&s[6], filters);  // 30 31 32 33 34 35 36 37 | 
 |       vst1_u8(dst + 0 * dst_stride, d[0]); | 
 |       vst1_u8(dst + 1 * dst_stride, d[1]); | 
 |       vst1_u8(dst + 2 * dst_stride, d[2]); | 
 |       vst1_u8(dst + 3 * dst_stride, d[3]); | 
 |  | 
 |       s[0] = s[8]; | 
 |       s[1] = s[9]; | 
 |       s[2] = s[10]; | 
 |       s[3] = s[11]; | 
 |       s[4] = s[12]; | 
 |       s[5] = s[13]; | 
 |  | 
 |       dst += 4 * dst_stride; | 
 |       y -= 4; | 
 |     } while (y); | 
 |     t -= width_hor * (2 * height_ver + 6); | 
 |     t += 8; | 
 |     dst -= height_ver * dst_stride; | 
 |     dst += 8; | 
 |     x -= 8; | 
 |   } while (x); | 
 | } | 
 |  | 
 | static void scale_plane_4_to_1_general(const uint8_t *src, const int src_stride, | 
 |                                        uint8_t *dst, const int dst_stride, | 
 |                                        const int w, const int h, | 
 |                                        const int16_t *const coef, | 
 |                                        uint8_t *const temp_buffer) { | 
 |   const int width_hor = (w + 1) & ~1; | 
 |   const int width_ver = (w + 7) & ~7; | 
 |   const int height_hor = (4 * h + SUBPEL_TAPS - 2 + 7) & ~7; | 
 |   const int height_ver = (h + 1) & ~1; | 
 |   const int16x8_t filters = vld1q_s16(coef); | 
 |   int x, y = height_hor; | 
 |   uint8_t *t = temp_buffer; | 
 |   uint8x8_t s[12], d[2]; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   src -= (SUBPEL_TAPS / 2 - 1) * src_stride + SUBPEL_TAPS / 2 + 3; | 
 |  | 
 |   // horizontal 2x8 | 
 |   // Note: processing 2x8 is about 20% faster than processing row by row using | 
 |   // vld4_u8(). | 
 |   do { | 
 |     load_u8_8x8(src + 4, src_stride, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], | 
 |                 &s[6], &s[7]); | 
 |     transpose_u8_4x8(&s[0], &s[1], &s[2], &s[3], s[4], s[5], s[6], s[7]); | 
 |     x = width_hor; | 
 |  | 
 |     do { | 
 |       uint8x8x2_t dd; | 
 |       src += 8; | 
 |       load_u8_8x8(src, src_stride, &s[4], &s[5], &s[6], &s[7], &s[8], &s[9], | 
 |                   &s[10], &s[11]); | 
 |       transpose_u8_8x8(&s[4], &s[5], &s[6], &s[7], &s[8], &s[9], &s[10], | 
 |                        &s[11]); | 
 |  | 
 |       d[0] = scale_filter_8(&s[0], filters);  // 00 10 20 30 40 50 60 70 | 
 |       d[1] = scale_filter_8(&s[4], filters);  // 01 11 21 31 41 51 61 71 | 
 |       // dd.val[0]: 00 01 20 21 40 41 60 61 | 
 |       // dd.val[1]: 10 11 30 31 50 51 70 71 | 
 |       dd = vtrn_u8(d[0], d[1]); | 
 |       vst1_lane_u16((uint16_t *)(t + 0 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[0]), 0); | 
 |       vst1_lane_u16((uint16_t *)(t + 1 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[1]), 0); | 
 |       vst1_lane_u16((uint16_t *)(t + 2 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[0]), 1); | 
 |       vst1_lane_u16((uint16_t *)(t + 3 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[1]), 1); | 
 |       vst1_lane_u16((uint16_t *)(t + 4 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[0]), 2); | 
 |       vst1_lane_u16((uint16_t *)(t + 5 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[1]), 2); | 
 |       vst1_lane_u16((uint16_t *)(t + 6 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[0]), 3); | 
 |       vst1_lane_u16((uint16_t *)(t + 7 * width_hor), | 
 |                     vreinterpret_u16_u8(dd.val[1]), 3); | 
 |  | 
 |       s[0] = s[8]; | 
 |       s[1] = s[9]; | 
 |       s[2] = s[10]; | 
 |       s[3] = s[11]; | 
 |  | 
 |       t += 2; | 
 |       x -= 2; | 
 |     } while (x); | 
 |     src += 8 * src_stride - 4 * width_hor; | 
 |     t += 7 * width_hor; | 
 |     y -= 8; | 
 |   } while (y); | 
 |  | 
 |   // vertical 8x2 | 
 |   x = width_ver; | 
 |   t = temp_buffer; | 
 |   do { | 
 |     load_u8_8x4(t, width_hor, &s[0], &s[1], &s[2], &s[3]); | 
 |     t += 4 * width_hor; | 
 |     y = height_ver; | 
 |  | 
 |     do { | 
 |       load_u8_8x8(t, width_hor, &s[4], &s[5], &s[6], &s[7], &s[8], &s[9], | 
 |                   &s[10], &s[11]); | 
 |       t += 8 * width_hor; | 
 |  | 
 |       d[0] = scale_filter_8(&s[0], filters);  // 00 01 02 03 04 05 06 07 | 
 |       d[1] = scale_filter_8(&s[4], filters);  // 10 11 12 13 14 15 16 17 | 
 |       vst1_u8(dst + 0 * dst_stride, d[0]); | 
 |       vst1_u8(dst + 1 * dst_stride, d[1]); | 
 |  | 
 |       s[0] = s[8]; | 
 |       s[1] = s[9]; | 
 |       s[2] = s[10]; | 
 |       s[3] = s[11]; | 
 |  | 
 |       dst += 2 * dst_stride; | 
 |       y -= 2; | 
 |     } while (y); | 
 |     t -= width_hor * (4 * height_ver + 4); | 
 |     t += 8; | 
 |     dst -= height_ver * dst_stride; | 
 |     dst += 8; | 
 |     x -= 8; | 
 |   } while (x); | 
 | } | 
 |  | 
 | static INLINE uint8x8_t scale_filter_bilinear(const uint8x8_t *const s, | 
 |                                               const uint8x8_t *const coef) { | 
 |   const uint16x8_t h0 = vmull_u8(s[0], coef[0]); | 
 |   const uint16x8_t h1 = vmlal_u8(h0, s[1], coef[1]); | 
 |  | 
 |   return vrshrn_n_u16(h1, 7); | 
 | } | 
 |  | 
 | // Notes for 4 to 3 scaling: | 
 | // | 
 | // 1. 6 rows are calculated in each horizontal inner loop, so width_hor must be | 
 | // multiple of 6, and no less than w. | 
 | // | 
 | // 2. 8 rows are calculated in each vertical inner loop, so width_ver must be | 
 | // multiple of 8, and no less than w. | 
 | // | 
 | // 3. 8 columns are calculated in each horizontal inner loop for further | 
 | // vertical scaling, so height_hor must be multiple of 8, and no less than | 
 | // 4 * h / 3. | 
 | // | 
 | // 4. 6 columns are calculated in each vertical inner loop, so height_ver must | 
 | // be multiple of 6, and no less than h. | 
 | // | 
 | // 5. The physical location of the last row of the 4 to 3 scaled frame is | 
 | // decided by phase_scaler, and are always less than 1 pixel below the last row | 
 | // of the original image. | 
 | static void scale_plane_4_to_3_bilinear(const uint8_t *src, | 
 |                                         const int src_stride, uint8_t *dst, | 
 |                                         const int dst_stride, const int w, | 
 |                                         const int h, const int phase_scaler, | 
 |                                         uint8_t *const temp_buffer) { | 
 |   static const int step_q4 = 16 * 4 / 3; | 
 |   const int width_hor = (w + 5) - ((w + 5) % 6); | 
 |   const int stride_hor = width_hor + 2;  // store 2 extra pixels | 
 |   const int width_ver = (w + 7) & ~7; | 
 |   // We only need 1 extra row below because there are only 2 bilinear | 
 |   // coefficients. | 
 |   const int height_hor = (4 * h / 3 + 1 + 7) & ~7; | 
 |   const int height_ver = (h + 5) - ((h + 5) % 6); | 
 |   int x, y = height_hor; | 
 |   uint8_t *t = temp_buffer; | 
 |   uint8x8_t s[9], d[8], c[6]; | 
 |   const InterpKernel *interp_kernel = | 
 |       (const InterpKernel *)av1_interp_filter_params_list[BILINEAR].filter_ptr; | 
 |   assert(w && h); | 
 |  | 
 |   c[0] = vdup_n_u8((uint8_t)interp_kernel[phase_scaler][3]); | 
 |   c[1] = vdup_n_u8((uint8_t)interp_kernel[phase_scaler][4]); | 
 |   c[2] = vdup_n_u8( | 
 |       (uint8_t)interp_kernel[(phase_scaler + 1 * step_q4) & SUBPEL_MASK][3]); | 
 |   c[3] = vdup_n_u8( | 
 |       (uint8_t)interp_kernel[(phase_scaler + 1 * step_q4) & SUBPEL_MASK][4]); | 
 |   c[4] = vdup_n_u8( | 
 |       (uint8_t)interp_kernel[(phase_scaler + 2 * step_q4) & SUBPEL_MASK][3]); | 
 |   c[5] = vdup_n_u8( | 
 |       (uint8_t)interp_kernel[(phase_scaler + 2 * step_q4) & SUBPEL_MASK][4]); | 
 |  | 
 |   d[6] = vdup_n_u8(0); | 
 |   d[7] = vdup_n_u8(0); | 
 |  | 
 |   // horizontal 6x8 | 
 |   do { | 
 |     load_u8_8x8(src, src_stride, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], | 
 |                 &s[6], &s[7]); | 
 |     src += 1; | 
 |     transpose_u8_8x8(&s[0], &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], &s[7]); | 
 |     x = width_hor; | 
 |  | 
 |     do { | 
 |       load_u8_8x8(src, src_stride, &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], | 
 |                   &s[7], &s[8]); | 
 |       src += 8; | 
 |       transpose_u8_8x8(&s[1], &s[2], &s[3], &s[4], &s[5], &s[6], &s[7], &s[8]); | 
 |  | 
 |       // 00 10 20 30 40 50 60 70 | 
 |       // 01 11 21 31 41 51 61 71 | 
 |       // 02 12 22 32 42 52 62 72 | 
 |       // 03 13 23 33 43 53 63 73 | 
 |       // 04 14 24 34 44 54 64 74 | 
 |       // 05 15 25 35 45 55 65 75 | 
 |       d[0] = scale_filter_bilinear(&s[0], &c[0]); | 
 |       d[1] = | 
 |           scale_filter_bilinear(&s[(phase_scaler + 1 * step_q4) >> 4], &c[2]); | 
 |       d[2] = | 
 |           scale_filter_bilinear(&s[(phase_scaler + 2 * step_q4) >> 4], &c[4]); | 
 |       d[3] = scale_filter_bilinear(&s[4], &c[0]); | 
 |       d[4] = scale_filter_bilinear(&s[4 + ((phase_scaler + 1 * step_q4) >> 4)], | 
 |                                    &c[2]); | 
 |       d[5] = scale_filter_bilinear(&s[4 + ((phase_scaler + 2 * step_q4) >> 4)], | 
 |                                    &c[4]); | 
 |  | 
 |       // 00 01 02 03 04 05 xx xx | 
 |       // 10 11 12 13 14 15 xx xx | 
 |       // 20 21 22 23 24 25 xx xx | 
 |       // 30 31 32 33 34 35 xx xx | 
 |       // 40 41 42 43 44 45 xx xx | 
 |       // 50 51 52 53 54 55 xx xx | 
 |       // 60 61 62 63 64 65 xx xx | 
 |       // 70 71 72 73 74 75 xx xx | 
 |       transpose_u8_8x8(&d[0], &d[1], &d[2], &d[3], &d[4], &d[5], &d[6], &d[7]); | 
 |       // store 2 extra pixels | 
 |       vst1_u8(t + 0 * stride_hor, d[0]); | 
 |       vst1_u8(t + 1 * stride_hor, d[1]); | 
 |       vst1_u8(t + 2 * stride_hor, d[2]); | 
 |       vst1_u8(t + 3 * stride_hor, d[3]); | 
 |       vst1_u8(t + 4 * stride_hor, d[4]); | 
 |       vst1_u8(t + 5 * stride_hor, d[5]); | 
 |       vst1_u8(t + 6 * stride_hor, d[6]); | 
 |       vst1_u8(t + 7 * stride_hor, d[7]); | 
 |  | 
 |       s[0] = s[8]; | 
 |  | 
 |       t += 6; | 
 |       x -= 6; | 
 |     } while (x); | 
 |     src += 8 * src_stride - 4 * width_hor / 3 - 1; | 
 |     t += 7 * stride_hor + 2; | 
 |     y -= 8; | 
 |   } while (y); | 
 |  | 
 |   // vertical 8x6 | 
 |   x = width_ver; | 
 |   t = temp_buffer; | 
 |   do { | 
 |     load_u8_8x8(t, stride_hor, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], | 
 |                 &s[7]); | 
 |     t += stride_hor; | 
 |     y = height_ver; | 
 |  | 
 |     do { | 
 |       load_u8_8x8(t, stride_hor, &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], | 
 |                   &s[7], &s[8]); | 
 |       t += 8 * stride_hor; | 
 |  | 
 |       d[0] = scale_filter_bilinear(&s[0], &c[0]); | 
 |       d[1] = | 
 |           scale_filter_bilinear(&s[(phase_scaler + 1 * step_q4) >> 4], &c[2]); | 
 |       d[2] = | 
 |           scale_filter_bilinear(&s[(phase_scaler + 2 * step_q4) >> 4], &c[4]); | 
 |       d[3] = scale_filter_bilinear(&s[4], &c[0]); | 
 |       d[4] = scale_filter_bilinear(&s[4 + ((phase_scaler + 1 * step_q4) >> 4)], | 
 |                                    &c[2]); | 
 |       d[5] = scale_filter_bilinear(&s[4 + ((phase_scaler + 2 * step_q4) >> 4)], | 
 |                                    &c[4]); | 
 |       vst1_u8(dst + 0 * dst_stride, d[0]); | 
 |       vst1_u8(dst + 1 * dst_stride, d[1]); | 
 |       vst1_u8(dst + 2 * dst_stride, d[2]); | 
 |       vst1_u8(dst + 3 * dst_stride, d[3]); | 
 |       vst1_u8(dst + 4 * dst_stride, d[4]); | 
 |       vst1_u8(dst + 5 * dst_stride, d[5]); | 
 |  | 
 |       s[0] = s[8]; | 
 |  | 
 |       dst += 6 * dst_stride; | 
 |       y -= 6; | 
 |     } while (y); | 
 |     t -= stride_hor * (4 * height_ver / 3 + 1); | 
 |     t += 8; | 
 |     dst -= height_ver * dst_stride; | 
 |     dst += 8; | 
 |     x -= 8; | 
 |   } while (x); | 
 | } | 
 |  | 
 | static void scale_plane_4_to_3_general(const uint8_t *src, const int src_stride, | 
 |                                        uint8_t *dst, const int dst_stride, | 
 |                                        const int w, const int h, | 
 |                                        const int16_t *const coef, | 
 |                                        const int phase_scaler, | 
 |                                        uint8_t *const temp_buffer) { | 
 |   static const int step_q4 = 16 * 4 / 3; | 
 |   const int width_hor = (w + 5) - ((w + 5) % 6); | 
 |   const int stride_hor = width_hor + 2;  // store 2 extra pixels | 
 |   const int width_ver = (w + 7) & ~7; | 
 |   // We need (SUBPEL_TAPS - 1) extra rows: (SUBPEL_TAPS / 2 - 1) extra rows | 
 |   // above and (SUBPEL_TAPS / 2) extra rows below. | 
 |   const int height_hor = (4 * h / 3 + SUBPEL_TAPS - 1 + 7) & ~7; | 
 |   const int height_ver = (h + 5) - ((h + 5) % 6); | 
 |   const int16x8_t filters0 = | 
 |       vld1q_s16(&coef[(phase_scaler + 0 * step_q4) & SUBPEL_MASK]); | 
 |   const int16x8_t filters1 = | 
 |       vld1q_s16(&coef[(phase_scaler + 1 * step_q4) & SUBPEL_MASK]); | 
 |   const int16x8_t filters2 = | 
 |       vld1q_s16(&coef[(phase_scaler + 2 * step_q4) & SUBPEL_MASK]); | 
 |   int x, y = height_hor; | 
 |   uint8_t *t = temp_buffer; | 
 |   uint8x8_t s[15], d[8]; | 
 |  | 
 |   assert(w && h); | 
 |  | 
 |   src -= (SUBPEL_TAPS / 2 - 1) * src_stride + SUBPEL_TAPS / 2; | 
 |   d[6] = vdup_n_u8(0); | 
 |   d[7] = vdup_n_u8(0); | 
 |  | 
 |   // horizontal 6x8 | 
 |   do { | 
 |     load_u8_8x8(src + 1, src_stride, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], | 
 |                 &s[6], &s[7]); | 
 |     transpose_u8_8x8(&s[0], &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], &s[7]); | 
 |     x = width_hor; | 
 |  | 
 |     do { | 
 |       src += 8; | 
 |       load_u8_8x8(src, src_stride, &s[7], &s[8], &s[9], &s[10], &s[11], &s[12], | 
 |                   &s[13], &s[14]); | 
 |       transpose_u8_8x8(&s[7], &s[8], &s[9], &s[10], &s[11], &s[12], &s[13], | 
 |                        &s[14]); | 
 |  | 
 |       // 00 10 20 30 40 50 60 70 | 
 |       // 01 11 21 31 41 51 61 71 | 
 |       // 02 12 22 32 42 52 62 72 | 
 |       // 03 13 23 33 43 53 63 73 | 
 |       // 04 14 24 34 44 54 64 74 | 
 |       // 05 15 25 35 45 55 65 75 | 
 |       d[0] = scale_filter_8(&s[0], filters0); | 
 |       d[1] = scale_filter_8(&s[(phase_scaler + 1 * step_q4) >> 4], filters1); | 
 |       d[2] = scale_filter_8(&s[(phase_scaler + 2 * step_q4) >> 4], filters2); | 
 |       d[3] = scale_filter_8(&s[4], filters0); | 
 |       d[4] = | 
 |           scale_filter_8(&s[4 + ((phase_scaler + 1 * step_q4) >> 4)], filters1); | 
 |       d[5] = | 
 |           scale_filter_8(&s[4 + ((phase_scaler + 2 * step_q4) >> 4)], filters2); | 
 |  | 
 |       // 00 01 02 03 04 05 xx xx | 
 |       // 10 11 12 13 14 15 xx xx | 
 |       // 20 21 22 23 24 25 xx xx | 
 |       // 30 31 32 33 34 35 xx xx | 
 |       // 40 41 42 43 44 45 xx xx | 
 |       // 50 51 52 53 54 55 xx xx | 
 |       // 60 61 62 63 64 65 xx xx | 
 |       // 70 71 72 73 74 75 xx xx | 
 |       transpose_u8_8x8(&d[0], &d[1], &d[2], &d[3], &d[4], &d[5], &d[6], &d[7]); | 
 |       // store 2 extra pixels | 
 |       vst1_u8(t + 0 * stride_hor, d[0]); | 
 |       vst1_u8(t + 1 * stride_hor, d[1]); | 
 |       vst1_u8(t + 2 * stride_hor, d[2]); | 
 |       vst1_u8(t + 3 * stride_hor, d[3]); | 
 |       vst1_u8(t + 4 * stride_hor, d[4]); | 
 |       vst1_u8(t + 5 * stride_hor, d[5]); | 
 |       vst1_u8(t + 6 * stride_hor, d[6]); | 
 |       vst1_u8(t + 7 * stride_hor, d[7]); | 
 |  | 
 |       s[0] = s[8]; | 
 |       s[1] = s[9]; | 
 |       s[2] = s[10]; | 
 |       s[3] = s[11]; | 
 |       s[4] = s[12]; | 
 |       s[5] = s[13]; | 
 |       s[6] = s[14]; | 
 |  | 
 |       t += 6; | 
 |       x -= 6; | 
 |     } while (x); | 
 |     src += 8 * src_stride - 4 * width_hor / 3; | 
 |     t += 7 * stride_hor + 2; | 
 |     y -= 8; | 
 |   } while (y); | 
 |  | 
 |   // vertical 8x6 | 
 |   x = width_ver; | 
 |   t = temp_buffer; | 
 |   do { | 
 |     load_u8_8x8(t, stride_hor, &s[0], &s[1], &s[2], &s[3], &s[4], &s[5], &s[6], | 
 |                 &s[7]); | 
 |     t += 7 * stride_hor; | 
 |     y = height_ver; | 
 |  | 
 |     do { | 
 |       load_u8_8x8(t, stride_hor, &s[7], &s[8], &s[9], &s[10], &s[11], &s[12], | 
 |                   &s[13], &s[14]); | 
 |       t += 8 * stride_hor; | 
 |  | 
 |       d[0] = scale_filter_8(&s[0], filters0); | 
 |       d[1] = scale_filter_8(&s[(phase_scaler + 1 * step_q4) >> 4], filters1); | 
 |       d[2] = scale_filter_8(&s[(phase_scaler + 2 * step_q4) >> 4], filters2); | 
 |       d[3] = scale_filter_8(&s[4], filters0); | 
 |       d[4] = | 
 |           scale_filter_8(&s[4 + ((phase_scaler + 1 * step_q4) >> 4)], filters1); | 
 |       d[5] = | 
 |           scale_filter_8(&s[4 + ((phase_scaler + 2 * step_q4) >> 4)], filters2); | 
 |       vst1_u8(dst + 0 * dst_stride, d[0]); | 
 |       vst1_u8(dst + 1 * dst_stride, d[1]); | 
 |       vst1_u8(dst + 2 * dst_stride, d[2]); | 
 |       vst1_u8(dst + 3 * dst_stride, d[3]); | 
 |       vst1_u8(dst + 4 * dst_stride, d[4]); | 
 |       vst1_u8(dst + 5 * dst_stride, d[5]); | 
 |  | 
 |       s[0] = s[8]; | 
 |       s[1] = s[9]; | 
 |       s[2] = s[10]; | 
 |       s[3] = s[11]; | 
 |       s[4] = s[12]; | 
 |       s[5] = s[13]; | 
 |       s[6] = s[14]; | 
 |  | 
 |       dst += 6 * dst_stride; | 
 |       y -= 6; | 
 |     } while (y); | 
 |     t -= stride_hor * (4 * height_ver / 3 + 7); | 
 |     t += 8; | 
 |     dst -= height_ver * dst_stride; | 
 |     dst += 8; | 
 |     x -= 8; | 
 |   } while (x); | 
 | } | 
 |  | 
 | void av1_resize_and_extend_frame_neon(const YV12_BUFFER_CONFIG *src, | 
 |                                       YV12_BUFFER_CONFIG *dst, | 
 |                                       const InterpFilter filter, | 
 |                                       const int phase, const int num_planes) { | 
 |   // We use AOMMIN(num_planes, MAX_MB_PLANE) instead of num_planes to quiet | 
 |   // the static analysis warnings. | 
 |   for (int i = 0; i < AOMMIN(num_planes, MAX_MB_PLANE); ++i) { | 
 |     const int is_uv = i > 0; | 
 |     const int src_w = src->crop_widths[is_uv]; | 
 |     const int src_h = src->crop_heights[is_uv]; | 
 |     const int dst_w = dst->crop_widths[is_uv]; | 
 |     const int dst_h = dst->crop_heights[is_uv]; | 
 |     const int dst_y_w = (dst->crop_widths[0] + 1) & ~1; | 
 |     const int dst_y_h = (dst->crop_heights[0] + 1) & ~1; | 
 |  | 
 |     if (2 * dst_w == src_w && 2 * dst_h == src_h) { | 
 |       if (phase == 0) { | 
 |         scale_plane_2_to_1_phase_0(src->buffers[i], src->strides[is_uv], | 
 |                                    dst->buffers[i], dst->strides[is_uv], dst_w, | 
 |                                    dst_h); | 
 |       } else if (filter == BILINEAR) { | 
 |         const int16_t c0 = av1_bilinear_filters[phase][3]; | 
 |         const int16_t c1 = av1_bilinear_filters[phase][4]; | 
 |         scale_plane_2_to_1_bilinear(src->buffers[i], src->strides[is_uv], | 
 |                                     dst->buffers[i], dst->strides[is_uv], dst_w, | 
 |                                     dst_h, c0, c1); | 
 |       } else { | 
 |         const int buffer_stride = (dst_y_w + 3) & ~3; | 
 |         const int buffer_height = (2 * dst_y_h + SUBPEL_TAPS - 2 + 7) & ~7; | 
 |         uint8_t *const temp_buffer = | 
 |             (uint8_t *)malloc(buffer_stride * buffer_height); | 
 |         if (temp_buffer) { | 
 |           const InterpKernel *interp_kernel = | 
 |               (const InterpKernel *)av1_interp_filter_params_list[filter] | 
 |                   .filter_ptr; | 
 |           scale_plane_2_to_1_general(src->buffers[i], src->strides[is_uv], | 
 |                                      dst->buffers[i], dst->strides[is_uv], | 
 |                                      dst_w, dst_h, interp_kernel[phase], | 
 |                                      temp_buffer); | 
 |           free(temp_buffer); | 
 |         } | 
 |       } | 
 |     } else if (4 * dst_w == src_w && 4 * dst_h == src_h) { | 
 |       if (phase == 0) { | 
 |         scale_plane_4_to_1_phase_0(src->buffers[i], src->strides[is_uv], | 
 |                                    dst->buffers[i], dst->strides[is_uv], dst_w, | 
 |                                    dst_h); | 
 |       } else if (filter == BILINEAR) { | 
 |         const int16_t c0 = av1_bilinear_filters[phase][3]; | 
 |         const int16_t c1 = av1_bilinear_filters[phase][4]; | 
 |         scale_plane_4_to_1_bilinear(src->buffers[i], src->strides[is_uv], | 
 |                                     dst->buffers[i], dst->strides[is_uv], dst_w, | 
 |                                     dst_h, c0, c1); | 
 |       } else { | 
 |         const int buffer_stride = (dst_y_w + 1) & ~1; | 
 |         const int buffer_height = (4 * dst_y_h + SUBPEL_TAPS - 2 + 7) & ~7; | 
 |         uint8_t *const temp_buffer = | 
 |             (uint8_t *)malloc(buffer_stride * buffer_height); | 
 |         if (temp_buffer) { | 
 |           const InterpKernel *interp_kernel = | 
 |               (const InterpKernel *)av1_interp_filter_params_list[filter] | 
 |                   .filter_ptr; | 
 |           scale_plane_4_to_1_general(src->buffers[i], src->strides[is_uv], | 
 |                                      dst->buffers[i], dst->strides[is_uv], | 
 |                                      dst_w, dst_h, interp_kernel[phase], | 
 |                                      temp_buffer); | 
 |           free(temp_buffer); | 
 |         } | 
 |       } | 
 |     } else if (4 * dst_w == 3 * src_w && 4 * dst_h == 3 * src_h) { | 
 |       // 4 to 3 | 
 |       const int buffer_stride = (dst_y_w + 5) - ((dst_y_w + 5) % 6) + 2; | 
 |       const int buffer_height = (4 * dst_y_h / 3 + SUBPEL_TAPS - 1 + 7) & ~7; | 
 |       uint8_t *const temp_buffer = | 
 |           (uint8_t *)malloc(buffer_stride * buffer_height); | 
 |       if (temp_buffer) { | 
 |         if (filter == BILINEAR) { | 
 |           scale_plane_4_to_3_bilinear(src->buffers[i], src->strides[is_uv], | 
 |                                       dst->buffers[i], dst->strides[is_uv], | 
 |                                       dst_w, dst_h, phase, temp_buffer); | 
 |         } else { | 
 |           const InterpKernel *interp_kernel = | 
 |               (const InterpKernel *)av1_interp_filter_params_list[filter] | 
 |                   .filter_ptr; | 
 |           scale_plane_4_to_3_general(src->buffers[i], src->strides[is_uv], | 
 |                                      dst->buffers[i], dst->strides[is_uv], | 
 |                                      dst_w, dst_h, interp_kernel[phase], phase, | 
 |                                      temp_buffer); | 
 |         } | 
 |       } | 
 |     } else { | 
 |       av1_resize_plane(src->buffers[i], src_h, src_w, src->strides[is_uv], | 
 |                        dst->buffers[i], dst_h, dst_w, dst->strides[is_uv]); | 
 |     } | 
 |     aom_extend_frame_borders(dst, num_planes); | 
 |   } | 
 | } |