av1/encoder/speed_features.h

/*
 * Copyright (c) 2021, Alliance for Open Media. All rights reserved
 *
 * This source code is subject to the terms of the BSD 3-Clause Clear License
 * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear
 * License was not distributed with this source code in the LICENSE file, you
 * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/.  If the
 * Alliance for Open Media Patent License 1.0 was not distributed with this
 * source code in the PATENTS file, you can obtain it at
 * aomedia.org/license/patent-license/.
 */

#ifndef AOM_AV1_ENCODER_SPEED_FEATURES_H_
#define AOM_AV1_ENCODER_SPEED_FEATURES_H_

#include "av1/common/enums.h"
#include "av1/encoder/enc_enums.h"
#include "av1/encoder/mcomp.h"
#include "av1/encoder/encodemb.h"

#ifdef __cplusplus
extern "C" {
#endif

/*! @file */

/*!\cond */
#define MAX_MESH_STEP 4

typedef struct MESH_PATTERN {
  int range;
  int interval;
} MESH_PATTERN;

enum {
  INTRA_ALL = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED) | (1 << D45_PRED) |
              (1 << D135_PRED) | (1 << D113_PRED) | (1 << D157_PRED) |
              (1 << D203_PRED) | (1 << D67_PRED) | (1 << SMOOTH_PRED) |
              (1 << SMOOTH_V_PRED) | (1 << SMOOTH_H_PRED) | (1 << PAETH_PRED),
  UV_INTRA_ALL =
      (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) |
      (1 << UV_D45_PRED) | (1 << UV_D135_PRED) | (1 << UV_D113_PRED) |
      (1 << UV_D157_PRED) | (1 << UV_D203_PRED) | (1 << UV_D67_PRED) |
      (1 << UV_SMOOTH_PRED) | (1 << UV_SMOOTH_V_PRED) |
      (1 << UV_SMOOTH_H_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED),
  UV_INTRA_DC = (1 << UV_DC_PRED),
  UV_INTRA_DC_CFL = (1 << UV_DC_PRED) | (1 << UV_CFL_PRED),
  UV_INTRA_DC_TM = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED),
  UV_INTRA_DC_PAETH_CFL =
      (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED),
  UV_INTRA_DC_H_V = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED),
  UV_INTRA_DC_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_V_PRED) |
                        (1 << UV_H_PRED) | (1 << UV_CFL_PRED),
  UV_INTRA_DC_PAETH_H_V = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) |
                          (1 << UV_V_PRED) | (1 << UV_H_PRED),
  UV_INTRA_DC_PAETH_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) |
                              (1 << UV_V_PRED) | (1 << UV_H_PRED) |
                              (1 << UV_CFL_PRED),
  INTRA_DC = (1 << DC_PRED),
  INTRA_DC_TM = (1 << DC_PRED) | (1 << PAETH_PRED),
  INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED),
  INTRA_DC_PAETH_H_V =
      (1 << DC_PRED) | (1 << PAETH_PRED) | (1 << V_PRED) | (1 << H_PRED)
};

enum {
  INTER_ALL = (1 << NEARMV) | (1 << GLOBALMV) | (1 << NEWMV) |
#if CONFIG_REDESIGN_WARP_MODES_SIGNALING_FLOW
              (1 << WARP_NEWMV) |
#endif  // CONFIG_REDESIGN_WARP_MODES_SIGNALING_FLOW
              (1 << NEAR_NEARMV) | (1 << NEW_NEWMV) | (1 << NEAR_NEWMV) |
              (1 << NEW_NEARMV) | (1 << GLOBAL_GLOBALMV),
  INTER_NEAR_GLOBAL = (1 << NEARMV) | (1 << GLOBALMV) | (1 << GLOBAL_GLOBALMV) |
                      (1 << NEW_NEARMV) | (1 << NEAR_NEWMV) |
                      (1 << NEAR_NEARMV),
};

enum {
  TXFM_CODING_SF = 1,
  INTER_PRED_SF = 2,
  INTRA_PRED_SF = 4,
  PARTITION_SF = 8,
  LOOP_FILTER_SF = 16,
  RD_SKIP_SF = 32,
  RESERVE_2_SF = 64,
  RESERVE_3_SF = 128,
} UENUM1BYTE(DEV_SPEED_FEATURES);

/* This enumeration defines when the rate control recode loop will be
 * enabled.
 */
enum {
  /*
   * No recodes allowed
   */
  DISALLOW_RECODE = 0,
  /*
   * Recode KF's exceeding maximum frame bandwidth
   */
  ALLOW_RECODE_KFMAXBW = 1,
  /*
   * Allow recode only for KF/ARF/GF frames
   */
  ALLOW_RECODE_KFARFGF = 2,
  /*
   * Allow recode for all frame types based on bitrate constraints.
   */
  ALLOW_RECODE = 3,
} UENUM1BYTE(RECODE_LOOP_TYPE);

enum {
  SUBPEL_TREE = 0,
  SUBPEL_TREE_PRUNED = 1,           // Prunes 1/2-pel searches
  SUBPEL_TREE_PRUNED_MORE = 2,      // Prunes 1/2-pel searches more aggressively
  SUBPEL_TREE_PRUNED_EVENMORE = 3,  // Prunes 1/2- and 1/4-pel searches
  // Other methods to come
} UENUM1BYTE(SUBPEL_SEARCH_METHODS);

enum {
  // Try the full image with different values.
  LPF_PICK_FROM_FULL_IMAGE,
  // Try the full image filter search with non-dual filter only.
  LPF_PICK_FROM_FULL_IMAGE_NON_DUAL,
  // Try a small portion of the image with different values.
  LPF_PICK_FROM_SUBIMAGE,
  // Estimate the level based on quantizer and frame type
  LPF_PICK_FROM_Q,
  // Pick 0 to disable LPF if LPF was enabled last frame
  LPF_PICK_MINIMAL_LPF
} UENUM1BYTE(LPF_PICK_METHOD);
/*!\endcond */

/*!\enum CDEF_PICK_METHOD
 * \brief This enumeration defines a variety of CDEF pick methods
 */
typedef enum {
  CDEF_FULL_SEARCH,      /**< Full search */
  CDEF_FAST_SEARCH_LVL1, /**< Search among a subset of all possible filters. */
  CDEF_FAST_SEARCH_LVL2, /**< Search reduced subset of filters than Level 1. */
  CDEF_FAST_SEARCH_LVL3, /**< Search reduced subset of secondary filters than
                              Level 2. */
  CDEF_PICK_FROM_Q,      /**< Estimate filter strength based on quantizer. */
  CDEF_PICK_METHODS
} CDEF_PICK_METHOD;

/*!\cond */
enum {
  // Terminate search early based on distortion so far compared to
  // qp step, distortion in the neighborhood of the frame, etc.
  FLAG_EARLY_TERMINATE = 1 << 0,

  // Skips comp inter modes if the best so far is an intra mode.
  FLAG_SKIP_COMP_BESTINTRA = 1 << 1,

  // Skips oblique intra modes if the best so far is an inter mode.
  FLAG_SKIP_INTRA_BESTINTER = 1 << 3,

  // Skips oblique intra modes  at angles 27, 63, 117, 153 if the best
  // intra so far is not one of the neighboring directions.
  FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4,

  // Skips intra modes other than DC_PRED if the source variance is small
  FLAG_SKIP_INTRA_LOWVAR = 1 << 5,
} UENUM1BYTE(MODE_SEARCH_SKIP_LOGIC);

enum {
  // No tx type pruning
  TX_TYPE_PRUNE_0 = 0,
  // adaptively prunes the least perspective tx types out of all 16
  // (tuned to provide negligible quality loss)
  TX_TYPE_PRUNE_1 = 1,
  // similar, but applies much more aggressive pruning to get better speed-up
  TX_TYPE_PRUNE_2 = 2,
  TX_TYPE_PRUNE_3 = 3,
  // More aggressive pruning based on tx type score and allowed tx count
  TX_TYPE_PRUNE_4 = 4,
  TX_TYPE_PRUNE_5 = 5,
} UENUM1BYTE(TX_TYPE_PRUNE_MODE);

enum {
  // No reaction to rate control on a detected slide/scene change.
  NO_DETECTION = 0,

  // Set to larger Q based only on the detected slide/scene change and
  // current/past Q.
  FAST_DETECTION_MAXQ = 1,
} UENUM1BYTE(OVERSHOOT_DETECTION_CBR);

enum {
  // Turns off multi-winner mode. So we will do txfm search on either all modes
  // if winner mode is off, or we will only on txfm search on a single winner
  // mode.
  MULTI_WINNER_MODE_OFF = 0,

  // Limits the number of winner modes to at most 2
  MULTI_WINNER_MODE_FAST = 1,

  // Uses the default number of winner modes, which is 3 for intra mode, and 1
  // for inter mode.
  MULTI_WINNER_MODE_DEFAULT = 2,
} UENUM1BYTE(MULTI_WINNER_MODE_TYPE);

typedef struct {
  TX_TYPE_PRUNE_MODE prune_2d_txfm_mode;
  int fast_intra_tx_type_search;
  int fast_inter_tx_type_search;

  // prune two least frequently chosen transforms for each intra mode
  int use_reduced_intra_txset;

  // Use a skip flag prediction model to detect blocks with skip = 1 early
  // and avoid doing full TX type search for such blocks.
  int use_skip_flag_prediction;

  // Threshold used by the ML based method to predict TX block split decisions.
  int ml_tx_split_thresh;

  // skip remaining transform type search when we found the rdcost of skip is
  // better than applying transform
  int skip_tx_search;

  // Prune tx type search using previous frame stats.
  int prune_tx_type_using_stats;
  // Prune tx type search using estimated RDcost
  int prune_tx_type_est_rd;

  // Flag used to control the winner mode processing for tx type pruning for
  // inter blocks. It enables further tx type mode pruning based on ML model for
  // mode evaluation and disables tx type mode pruning for winner mode
  // processing.
  int winner_mode_tx_type_pruning;
  // Speed feature to disable intra secondary transform
  int skip_stx_search;
  // Speed feature to disable cross chroma component transform
  int skip_cctx_search;
} TX_TYPE_SEARCH;

enum {
  // Search partitions using RD criterion
  SEARCH_PARTITION,

  // Always use a fixed size partition
  FIXED_PARTITION
} UENUM1BYTE(PARTITION_SEARCH_TYPE);

enum {
  NOT_IN_USE,
  DIRECT_PRED,
  RELAXED_PRED,
  ADAPT_PRED
} UENUM1BYTE(MAX_PART_PRED_MODE);

enum {
  LAST_MV_DATA,
  CURRENT_Q,
  QTR_ONLY,
} UENUM1BYTE(MV_PREC_LOGIC);

#if CONFIG_ENABLE_SR
enum {
  SUPERRES_AUTO_ALL,   // Tries all possible superres ratios
  SUPERRES_AUTO_DUAL,  // Tries no superres and q-based superres ratios
  SUPERRES_AUTO_SOLO,  // Only apply the q-based superres ratio
} UENUM1BYTE(SUPERRES_AUTO_SEARCH_TYPE);
#endif  // CONFIG_ENABLE_SR

/*!\endcond */
/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to determine
 * whether partition mode is reused. */
#define REUSE_PARTITION_MODE_FLAG (1 << 0)

/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to determine
 * whether the intra prediction_mode is reused. */
#define REUSE_INTRA_MODE_IN_INTERFRAME_FLAG (1 << 1)

/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to determine
 * whether the inter prediction_mode and ref frame are reused. */
#define REUSE_INTER_MODE_IN_INTERFRAME_FLAG (1 << 2)

/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to signal
 * reuse of inter and intra prediction_modes, as well as ref frame. */
#define REUSE_INTERFRAME_FLAG \
  (REUSE_INTRA_MODE_IN_INTERFRAME_FLAG | REUSE_INTER_MODE_IN_INTERFRAME_FLAG)

/*!
 * \brief Sequence/frame level speed vs quality features
 */
typedef struct HIGH_LEVEL_SPEED_FEATURES {
  /*!\cond */
  // Frame level coding parameter update
  int frame_parameter_update;

  /*!\endcond */
  /*!
   * Cases and frame types for which the recode loop is enabled.
   */
  RECODE_LOOP_TYPE recode_loop;

  /*!
   * Controls the tolerance vs target rate used in deciding whether to
   * recode a frame. It has no meaning if recode is disabled.
   */
  int recode_tolerance;

  /*!\cond */
  // Determine how motion vector precision is chosen. The possibilities are:
  // LAST_MV_DATA: use the mv data from the last coded frame
  // CURRENT_Q: use the current q as a threshold
  // QTR_ONLY: use quarter pel precision only.
  MV_PREC_LOGIC high_precision_mv_usage;

  // Always set to 0. If on it enables 0 cost background transmission
  // (except for the initial transmission of the segmentation). The feature is
  // disabled because the addition of very large block sizes make the
  // backgrounds very to cheap to encode, and the segmentation we have
  // adds overhead.
  int static_segmentation;

#if CONFIG_ENABLE_SR
  /*!
   * Superres-auto mode search type:
   */
  SUPERRES_AUTO_SEARCH_TYPE superres_auto_search_type;
#endif  // CONFIG_ENABLE_SR

  /*!
   * disallow references at different scale
   */
  bool disable_unequal_scale_refs;
  /*!\endcond */
} HIGH_LEVEL_SPEED_FEATURES;

/*!\cond */
typedef struct TPL_SPEED_FEATURES {
  // Enable/disable GOP length adaptive decision.
  int disable_gop_length_decision;
  // Prune the intra modes search by tpl.
  // If set to 0, we will search all intra modes from DC_PRED to PAETH_PRED.
  // If set to 1, we only search DC_PRED, V_PRED, and H_PRED.
  int prune_intra_modes;
  // This parameter controls which step in the n-step process we start at.
  int reduce_first_step_size;
  // Skip motion estimation based on the precision of center MVs and the
  // difference between center MVs.
  // If set to 0, motion estimation is skipped for duplicate center MVs
  // (default). If set to 1, motion estimation is skipped for duplicate
  // full-pixel center MVs. If set to 2, motion estimation is skipped if the
  // difference between center MVs is less than the threshold.
  int skip_alike_starting_mv;

  // When to stop subpel search.
  SUBPEL_FORCE_STOP subpel_force_stop;

  // Which search method to use.
  SEARCH_METHODS search_method;

  // Prune starting mvs in TPL based on sad scores.
  int prune_starting_mv;

  // Not run TPL for filtered Key frame.
  int disable_filtered_key_tpl;

  // Prune reference frames in TPL.
  int prune_ref_frames_in_tpl;
} TPL_SPEED_FEATURES;

typedef struct GLOBAL_MOTION_SPEED_FEATURES {
  int max_ref_frames;

  // During global motion estimation, prune remaining reference frames in a
  // given direction(past/future), if the evaluated ref_frame in that direction
  // yields gm_type as INVALID/TRANSLATION/IDENTITY
  int prune_ref_frame_for_gm_search;

  // Downsampling pyramid level to use for global motion estimation
  int downsample_level;

  // Number of refinement steps to apply after initial model generation
  int num_refinement_steps;

  // Disable global motion estimation based on stats of previous frames in the
  // GF group
  int disable_gm_search_based_on_stats;
} GLOBAL_MOTION_SPEED_FEATURES;

typedef struct PARTITION_SPEED_FEATURES {
  PARTITION_SEARCH_TYPE partition_search_type;

  // Used if partition_search_type = FIXED_PARTITION
  BLOCK_SIZE fixed_partition_size;

  // Use a ML model to adaptively terminate partition search after trying
  // PARTITION_SPLIT. Can take values 0 - 2, 0 meaning not being enabled, and
  // 1 - 2 increasing aggressiveness in order.
  int ml_early_term_after_part_split_level;

  // Skip rectangular partition test when partition type none gives better
  // rd than partition type split. Can take values 0 - 2, 0 referring to no
  // skipping, and 1 - 2 increasing aggressiveness of skipping in order.
  int less_rectangular_check_level;

  // Use square partition only beyond this block size.
  BLOCK_SIZE use_square_partition_only_threshold;

  // Sets min and max square partition levels for this superblock based on
  // motion vector and prediction error distribution produced from 16x16
  // simple motion search
  MAX_PART_PRED_MODE auto_max_partition_based_on_simple_motion;

  // Min and max square partition size we enable (block_size) as per auto
  // min max, but also used by adjust partitioning, and pick_partitioning.
  BLOCK_SIZE default_min_partition_size;
  BLOCK_SIZE default_max_partition_size;

  // Partition search early breakout thresholds.
  int64_t partition_search_breakout_dist_thr;
  int partition_search_breakout_rate_thr;

  // Thresholds for ML based partition search breakout.
  int ml_partition_search_breakout_thresh[PARTITION_BLOCK_SIZES];

  // Allow skipping partition search for still image frame
  int allow_partition_search_skip;

  // The aggressiveness of pruning with simple_motion_search.
  // Currently 0 is the lowest, and 2 the highest.
  int simple_motion_search_prune_agg;

  // Perform simple_motion_search on each possible subblock and use it to prune
  // PARTITION_HORZ and PARTITION_VERT.
  int simple_motion_search_prune_rect;

  // Perform simple motion search before none_partition to decide if we
  // want to remove all partitions other than PARTITION_SPLIT. If set to 0, this
  // model is disabled. If set to 1, the model attempts to perform
  // PARTITION_SPLIT only. If set to 2, the model also attempts to prune
  // PARTITION_SPLIT.
  int simple_motion_search_split;

  // Use features from simple_motion_search to terminate prediction block
  // partition after PARTITION_NONE
  int simple_motion_search_early_term_none;

  // Controls whether to reduce the number of motion search steps. If this is 0,
  // then simple_motion_search has the same number of steps as
  // single_motion_search (assuming no other speed features). Otherwise, reduce
  // the number of steps by the value contained in this variable.
  int simple_motion_search_reduce_search_steps;

  // This variable controls the maximum block size where intra blocks can be
  // used in inter frames.
  // TODO(aconverse): Fold this into one of the other many mode skips
  BLOCK_SIZE max_intra_bsize;

  // Use CNN with luma pixels on source frame on each of the 64x64 subblock to
  // perform split/no_split decision on intra-frames.
  int intra_cnn_split;

  // Prunes PARTITION_3 if PARTITION_NONE is used instead of PARTITION_HORZ|VERT
  int prune_rect_with_none_rd;

  // Prunes extended partitions if PARTITION_NONE is used instead of
  // PARTITION_HORZ|VERT.
  int prune_ext_part_with_part_none;

  // Prunes extended partitions if rect sub-partitions don't further split in
  // the same direction.
  int prune_ext_part_with_part_rect;

  // Prunes PARTITION_HORZ_4A/4B if vertical is the best partition, and
  // Prunes PARTITION_VERT_4A/4B if horizontal is the best partition.
  int prune_part_4_horz_or_vert;

  // Prunes PARTITION_HORZ_4A/4B based on PARTITION_HORZ_3 search result, and
  // Prunes PARTITION_VERT_4A/4B based on PARTITION_VERT_3 search result.
  int prune_part_4_with_part_3;

  // Prunes PARTITION_HORZ/VERT_4B based on PARTITION_HORZ/VERT_4A result.
  int prune_part_4b_with_part_4a;

  int two_pass_partition_search;

  // Prunes rect partition with ml model
  int prune_rect_with_ml;

  // End partition search if the grandparent, parent, and current block all
  // failed PARTITION_NONE
  int end_part_search_after_consec_failures;

  // The ext_recur_depth_level sets recursion depth allowed for ext partitions:
  // If set to 0, recursion depth is set to INT_MAX.
  // If set to 1, recursion depth is set 2 if block area > 1024 else it is set
  // to INT_MAX. If set to 2, recursion depth is set to 1.
  int ext_recur_depth_level;

  // Prune rect partitions if PARTITION_SPLIT goes deep.
  int prune_rect_with_split_depth;

  // Search horizontal and vertical split before PARTITION_NONE if the neighbor
  // blocks are much smaller than the current block size.
  int adaptive_partition_search_order;

  // Prune h partition types if their resulting boundary does not agree with
  // the current best partition's boundary after searching NONE, HORZ, and VERT.
  int prune_part_h_with_partition_boundary;

  // Prune r-way partition types if their resulting boundary does not agree with
  // the current best partition's boundary after searching NONE, HORZ, VERT, and
  // H-parts.
  int prune_part_4_with_partition_boundary;
#if CONFIG_ML_PART_SPLIT
  int prune_split_with_ml;
  int prune_split_ml_level;
  int prune_split_ml_level_inter;
#endif  // CONFIG_ML_PART_SPLIT
} PARTITION_SPEED_FEATURES;

typedef struct MV_SPEED_FEATURES {
  // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc).
  SEARCH_METHODS search_method;

  // Enable the use of faster, less accurate mv search method on bsize >=
  // BLOCK_32X32.
  // TODO(chiyotsai@google.com): Take the clip's resolution and mv activity into
  // account.
  int use_bsize_dependent_search_method;

  // If this is set to 1, we limit the motion search range to 2 times the
  // largest motion vector found in the last frame.
  int auto_mv_step_size;

  // Subpel_search_method can only be subpel_tree which does a subpixel
  // logarithmic search that keeps stepping at 1/2 pixel units until
  // you stop getting a gain, and then goes on to 1/4 and repeats
  // the same process. Along the way it skips many diagonals.
  SUBPEL_SEARCH_METHODS subpel_search_method;

  // Maximum number of steps in logarithmic subpel search before giving up.
  int subpel_iters_per_step;

  // When to stop subpel search.
  SUBPEL_FORCE_STOP subpel_force_stop;

  // When to stop subpel search in simple motion search.
  SUBPEL_FORCE_STOP simple_motion_subpel_force_stop;

  // The type of interpolation filter used in motion search.
  SUBPEL_SEARCH_TYPE subpel_search_type;

  // Threshold for allowing exhaustive motion search.
  int exhaustive_searches_thresh;

  // Pattern to be used for any exhaustive mesh searches (except intraBC ME).
  MESH_PATTERN mesh_patterns[MAX_MESH_STEP];

  // Pattern to be used for exhaustive mesh searches of intraBC ME.
  MESH_PATTERN intrabc_mesh_patterns[MAX_MESH_STEP];

  // Reduce single motion search range based on MV result of prior ref_mv_idx.
  int reduce_search_range;

  // Prune mesh search.
  int prune_mesh_search;

  // Use the rd cost around the best FULLPEL_MV to speed up subpel search
  int use_fullpel_costlist;

  // Accurate full pixel motion search based on TPL stats.
  int full_pixel_search_level;

  // Whether to downsample the rows in sad calculation during motion search.
  // This is only active when there are at least 16 rows.
  int use_downsampled_sad;

  // Method to use for refining WARP_CAUSAL motion vectors
  WARP_SEARCH_METHOD warp_search_method;

  // Maximum number of iterations in WARP_CAUSAL refinement search
  int warp_search_iters;
  // Use faster motion search settings for partition blocks with at least one
  // dimension that's >= 256
  int fast_motion_estimation_on_block_256;
} MV_SPEED_FEATURES;

typedef struct INTER_MODE_SPEED_FEATURES {
  // 2-pass inter mode model estimation where the preliminary pass skips
  // transform search and uses a model to estimate rd, while the final pass
  // computes the full transform search. Two types of models are supported:
  // 0: not used
  // 1: used with online dynamic rd model
  // 2: used with static rd model
  int inter_mode_rd_model_estimation;

  // Bypass transform search based on skip rd
  int txfm_rd_gate_level;

  // Limit the inter mode tested in the RD loop
  int reduce_inter_modes;

  // This variable is used to cap the maximum number of times we skip testing a
  // mode to be evaluated. A high value means we will be faster.
  int adaptive_rd_thresh;

  // Aggressively prune inter modes when best mode is skippable.
  int prune_inter_modes_if_skippable;

  // Drop less likely to be picked reference frames in the RD search.
  // Has five levels for now: 0, 1, 2, 3 and 4, where higher levels prune more
  // aggressively than lower ones. (0 means no pruning).
  int selective_ref_frame;

  // Prune reference frames.
  // 0 implies no pruning
  // 1 implies prune for extended partition
  // 2 implies prune horiz, vert and extended partition
  int prune_ref_frames;

  // Prune reference frames for ALTREF
  int alt_ref_search_fp;

  // flag to skip NEWMV mode in drl if the motion search result is the same
  int skip_repeated_newmv;

  // flag to skip the evaulation of intrabc mode in inter frame
  int skip_eval_intrabc_in_inter_frame;

  // flag to early terminate jmvd scaling factors
  int early_terminate_jmvd_scale_factor;

  // Skip the current ref_mv in NEW_MV mode if we have already encountered
  // another ref_mv in the drl such that:
  //  1. The other drl has the same fullpel_mv during the SIMPLE_TRANSLATION
  //     search process as the current fullpel_mv.
  //  2. The rate needed to encode the current fullpel_mv is larger than that
  //     for the other ref_mv.
  int skip_repeated_full_newmv;

  // This speed feature checks duplicate ref MVs among NEARMV and GLOBALMV and
  // skips GLOBALMV if a duplicate is found
  // TODO(any): Instead of skipping repeated ref mv, use the recalculated
  // rd-cost based on mode rate and skip the mode evaluation
  int skip_repeated_ref_mv;

  // Flag used to control the ref_best_rd based gating for chroma
  int perform_best_rd_based_gating_for_chroma;

  // Reuse the inter_intra_mode search result for other single ref modes
  int reuse_inter_intra_mode;

  // prune wedge and compound segment approximate rd evaluation based on
  // compound average modeled rd
  int prune_comp_type_by_model_rd;

  // prune wedge and compound segment approximate rd evaluation based on
  // compound average rd/ref_best_rd
  int prune_comp_type_by_comp_avg;

  // Skip some ref frames in compound motion search by single motion search
  // result. Has three levels for now: 0 referring to no skipping, and 1 - 3
  // increasing aggressiveness of skipping in order.
  // Note: The search order might affect the result. It assumes that the single
  // reference modes are searched before compound modes. It is better to search
  // same single inter mode as a group.
  int prune_comp_search_by_single_result;

  // If 1 we iterate finding a best reference for 2 ref frames together - via
  // a log search that iterates 4 times (check around mv for last for best
  // error of combined predictor then check around mv for alt). If 0 we
  // we just use the best motion vector found for each frame by itself.
  BLOCK_SIZE comp_inter_joint_search_thresh;

  // Instead of performing a full MV search, do a simple translation first
  // and only perform a full MV search on the motion vectors that performed
  // well.
  int prune_mode_search_simple_translation;

  // Only search compound modes with at least one "good" reference frame.
  // A reference frame is good if, after looking at its performance among
  // the single reference modes, it is one of the two best performers.
  int prune_compound_using_single_ref;

  // Skip extended compound mode using ref frames of above and left neighbor
  // blocks.
  // 0 : no pruning
  // 1 : prune extended compound mode (less aggressiveness)
  // 2 : prune extended compound mode (high aggressiveness)
  int prune_compound_using_neighbors;

  // Skip extended compound mode when ref frame corresponding to NEWMV does not
  // have NEWMV as single mode winner.
  // 0 : no pruning
  // 1 : prune extended compound mode (less aggressiveness)
  // 2 : prune extended compound mode (high aggressiveness)
  int prune_comp_using_best_single_mode_ref;

  // Based on previous ref_mv_idx search result, prune the following search.
  int prune_ref_mv_idx_search;

  // Disable one sided compound modes.
  int disable_onesided_comp;

  // Prune/gate motion mode evaluation based on token based rd
  // during transform search for inter blocks
  // Values are 0 (not used) , 1 - 3 with progressively increasing
  // aggressiveness
  int prune_motion_mode_level;

  // Prune warped motion search using previous frame stats.
  int prune_warped_prob_thresh;

  // Prune warpmv with mvd search using previous frame stats.
  int prune_warpmv_prob_thresh;

  // Enable/disable interintra wedge search.
  int disable_wedge_interintra_search;

  // De-couple wedge and mode search during interintra RDO.
  int fast_interintra_wedge_search;

  // Only enable wedge search if the variance is above this threshold.
  unsigned int disable_wedge_search_var_thresh;

  // Whether fast wedge sign estimate is used
  int fast_wedge_sign_estimate;

  // Whether to prune wedge search based on predictor difference
  int prune_wedge_pred_diff_based;

  // Enable/disable ME for interinter wedge search.
  int disable_interinter_wedge_newmv_search;

  // Enable/disable ME for interinter diffwtd search. PSNR BD-rate gain of
  // ~0.1 on the lowres test set, but ~15% slower computation.
  int enable_interinter_diffwtd_newmv_search;

  // Enable/disable smooth inter-intra mode
  int disable_smooth_interintra;

  // Disable interinter_wedge
  int disable_interinter_wedge;

  // Whether to override and disable sb level coeff cost updates, if
  // cpi->oxcf.cost_upd_freq.coeff = COST_UPD_SB (i.e. set at SB level)
  int disable_sb_level_coeff_cost_upd;

  // Whether to override and disable sb level mv cost updates, if
  // cpi->oxcf.cost_upd_freq.coeff = COST_UPD_SB (i.e. set at SB level)
  int disable_sb_level_mv_cost_upd;

  // Prune inter modes based on tpl stats
  // 0 : no pruning
  // 1 - 3 indicate increasing aggressiveness in order.
  int prune_inter_modes_based_on_tpl;

  // Model based breakout after interpolation filter search
  // 0: no breakout
  // 1: use model based rd breakout
  int model_based_post_interp_filter_breakout;

  // Reuse compound type rd decision when exact match is found
  // 0: No reuse
  // 1: Reuse the compound type rd data
  // 2: Reuse the compound type decision
  int reuse_compound_type_data;

  // Enable/disable masked compound.
  int disable_masked_comp;

  // flag to skip inter mode evaluation based on rate cost.
  int skip_mode_eval_based_on_rate_cost;

  // Under ERP, determines whether to reuse partition mode and prediction mode
  // if a block with the same (mi_row, mi_col, bsize) is visited more than one
  // by the encoder.
  int reuse_erp_mode_flag;
} INTER_MODE_SPEED_FEATURES;

typedef struct INTERP_FILTER_SPEED_FEATURES {
  // Save results of av1_interpolation_filter_search for a block
  // Check mv and ref_frames before search, if they are very close with previous
  // saved results, filter search can be skipped.
  int use_interp_filter;

  int cb_pred_filter_search;
} INTERP_FILTER_SPEED_FEATURES;

typedef struct INTRA_MODE_SPEED_FEATURES {
  // These bit masks allow you to enable or disable intra modes for each
  // transform size separately.
  int intra_y_mode_mask[TX_SIZES];
  int intra_uv_mode_mask[TX_SIZES];

  // flag to allow skipping intra mode for inter frame prediction
  int skip_intra_in_interframe;

  // variance threshold for intra mode gating when inter turned out to be skip
  // in inter frame prediction
  unsigned int src_var_thresh_intra_skip;

  // Prune intra mode candidates based on source block histogram of gradient.
  int intra_pruning_with_hog;

  // TODO(anyone): tune intra_pruning_with_hog_thresh for various speeds.
  float intra_pruning_with_hog_thresh;

  // Enable/disable smooth intra modes.
  int disable_smooth_intra;

  // prune palette search
  // 0: No pruning
  // 1: Perform coarse search to prune the palette colors. For winner colors,
  // neighbors are also evaluated using a finer search.
  // 2: Perform 2 way palette search from max colors to min colors (and min
  // colors to remaining colors) and terminate the search if current number of
  // palette colors is not the winner.
  int prune_palette_search_level;
  // Reuse chroma mode rate and distortion info during intra modes evaluation
  // in inter frames.
  // False: No reuse
  // True: Reuse UV mode RD info.
  bool reuse_uv_mode_rd_info;
#if CONFIG_DIP
  bool skip_intra_dip_search;
#endif  // CONFIG_DIP
} INTRA_MODE_SPEED_FEATURES;

typedef struct TX_SPEED_FEATURES {
  // Init search depth for square and rectangular transform partitions.
  // Values:
  // 0 - search full tree, 1: search 1 level, 2: search the highest level only
  int inter_tx_size_search_init_depth_sqr;
  int inter_tx_size_search_init_depth_rect;
  int intra_tx_size_search_init_depth_sqr;
  int intra_tx_size_search_init_depth_rect;

  // If any dimension of a coding block size above 64, always search the
  // largest transform only, since the largest transform block size is 64x64.
  int tx_size_search_lgr_block;

  TX_TYPE_SEARCH tx_type_search;

  // Skip split transform block partition when the collocated bigger block
  // is selected as all zero coefficients.
  int txb_split_cap;

  // Prune transform type evaluation when target rdcost is low as
  // compared to best rdcost and based on eob.
  // 0: no pruning
  // 1,4,5: pruning based on best rd
  // 2,3: pruning based on eob and best rd
  int adaptive_tx_type_search_idx;
  // Prune transform partition type evaluation when target rdcost is low as
  // compared to TX_PARTITION_NONE and based on the transform size.
  int adaptive_tx_partition_type_search_idx;

  // Prune level for tx_size_type search for inter based on rd model
  // 0: no pruning
  // 1-2: progressively increasing aggressiveness of pruning
  int model_based_prune_tx_search_level;

  // Use hash table to store intra(keyframe only) txb transform search results
  // to avoid repeated search on the same residue signal. This is currently not
  // compatible with multi-winner mode as the hash states are reset during
  // winner mode processing.
  int use_intra_txb_hash;

  // Use hash table to store inter txb transform search results
  // to avoid repeated search on the same residue signal.
  int use_inter_txb_hash;

  // Refine TX type after fast TX search.
  int refine_fast_tx_search_results;

  // Prune RD evaluation of secondary transform using the SSE of secondary
  // transform output.
  bool prune_tx_rd_eval_sec_tx_sse;

  // On inter frames, use the largest txfm size for block_sizes smaller than
  // or equal to BLOCK_16X16.
  bool use_largest_tx_size_for_small_bsize;

  // tx_type search pruning at low qp and resolution >= 1080p
  int restrict_tx_partition_type_search;

  // Prune RD evaluation of transform block using RD Cost of NONE transform
  // partition of inter modes that are evaluated so far
  bool prune_inter_tx_part_rd_eval;

  // Enable txfm partition search
  bool enable_tx_partition;
} TX_SPEED_FEATURES;

typedef struct RD_CALC_SPEED_FEATURES {
  // Fast approximation of av1_model_rd_from_var_lapndz
  int simple_model_rd_from_var;

#if CONFIG_TCQ
  // Use regular scaler quant instead of trellis coded quant
  bool disable_tcq;
#endif  // CONFIG_TCQ

  // Whether to compute distortion in the image domain (slower but
  // more accurate), or in the transform domain (faster but less acurate).
  // 0: use image domain
  // 1: use transform domain in tx_type search, and use image domain for
  // RD_STATS
  // 2: use transform domain
  int tx_domain_dist_level;

  // Transform domain distortion threshold level
  int tx_domain_dist_thres_level;

  // Trellis (dynamic programming) optimization of quantized values
  TRELLIS_OPT_TYPE optimize_coefficients;

  // Use hash table to store macroblock RD search results
  // to avoid repeated search on the same residue signal.
  int use_mb_rd_hash;

  // Flag used to control the extent of coeff R-D optimization
  int perform_coeff_opt;

  // Enable coeff R-D optimization based on SATD values.
  // 0    : Do not disable coeff R-D opt.
  // 1, 2 : Disable coeff R-D opt with progressively increasing aggressiveness.
  int perform_coeff_opt_based_on_satd;
} RD_CALC_SPEED_FEATURES;

typedef struct WINNER_MODE_SPEED_FEATURES {
  // Flag used to control the winner mode processing for better R-D optimization
  // of quantized coeffs
  int enable_winner_mode_for_coeff_opt;

  // Flag used to control the winner mode processing for transform size
  // search method
  int enable_winner_mode_for_tx_size_srch;

  // Control transform size search level
  // Eval type: Default       Mode        Winner
  // Level 0  : FULL RD     LARGEST ALL   FULL RD
  // Level 1  : FAST RD     LARGEST ALL   FULL RD
  // Level 2  : LARGEST ALL LARGEST ALL   FULL RD
  int tx_size_search_level;

  // Flag used to control the winner mode processing for use transform
  // domain distortion
  int enable_winner_mode_for_use_tx_domain_dist;

  // Flag used to enable processing of multiple winner modes
  MULTI_WINNER_MODE_TYPE multi_winner_mode_type;

  // Motion mode for winner candidates:
  // 0: speed feature OFF
  // 1 / 2 : Use configured number of winner candidates
  int motion_mode_for_winner_cand;

  // Early DC only txfm block prediction
  // 0: speed feature OFF
  // 1 / 2 : Use the configured level for different modes
  int dc_blk_pred_level;
} WINNER_MODE_SPEED_FEATURES;

typedef struct LOOP_FILTER_SPEED_FEATURES {
  // This feature controls how the loop filter level is determined.
  LPF_PICK_METHOD lpf_pick;

  // Control how the CDEF strength is determined.
  CDEF_PICK_METHOD cdef_pick_method;

  // Decoder side speed feature to add penalty for use of dual-sgr filters.
  // Takes values 0 - 10, 0 indicating no penalty and each additional level
  // adding a penalty of 1%
  int dual_sgr_penalty_level;

  // prune sgr ep using binary search like mechanism
  int enable_sgr_ep_pruning;

  // Disable loop restoration for Chroma plane
  int disable_loop_restoration_chroma;

  // Disable loop restoration filter
  int disable_lr_filter;

  // Number of refinement steps for WIENER_NONSEP tool
  int wienerns_refine_iters;
} LOOP_FILTER_SPEED_FEATURES;

typedef struct FLEXMV_PRECISION_SPEED_FEATURES {
  // Do not search 8-pel precision
  int do_not_search_8_pel_precision;

  // Do not search 4-pel precision
  int do_not_search_4_pel_precision;

  // enable early termination than 4-pel precision
  int terminate_early_4_pel_precision;

  // Skip similar ref mvs.
  int skip_similar_ref_mv;

  // Skip RDO of the repeated newMV for lower precisions.
  int skip_repeated_newmv_low_prec;

  // Fast refinement of MV for low precision. 1 means fast refinement is enabled
  int fast_mv_refinement;

  // fast motion search
  int fast_motion_search_low_precision;

  // Prune the evaluation of current MV precision based on best MV precision
  // chosen so far.
  int prune_mv_prec_using_best_mv_prec_so_far;
} FLEXMV_PRECISION_SPEED_FEATURES;

/*!\endcond */

/*!
 * \brief Top level speed vs quality trade off data struture.
 */
typedef struct SPEED_FEATURES {
  /*!
   * Sequence/frame level speed features:
   */
  HIGH_LEVEL_SPEED_FEATURES hl_sf;

  /*!
   * Speed features related to how tpl's searches are done.
   */
  TPL_SPEED_FEATURES tpl_sf;

  /*!
   * Global motion speed features:
   */
  GLOBAL_MOTION_SPEED_FEATURES gm_sf;

  /*!
   * Partition search speed features:
   */
  PARTITION_SPEED_FEATURES part_sf;

  /*!
   * Motion search speed features:
   */
  MV_SPEED_FEATURES mv_sf;

  /*!
   * Inter mode search speed features:
   */
  INTER_MODE_SPEED_FEATURES inter_sf;

  /*!
   * Interpolation filter search speed features:
   */
  INTERP_FILTER_SPEED_FEATURES interp_sf;

  /*!
   * Intra mode search speed features:
   */
  INTRA_MODE_SPEED_FEATURES intra_sf;

  /*!
   * Transform size/type search speed features:
   */
  TX_SPEED_FEATURES tx_sf;

  /*!
   * RD calculation speed features:
   */
  RD_CALC_SPEED_FEATURES rd_sf;

  /*!
   * Two-pass mode evaluation features:
   */
  WINNER_MODE_SPEED_FEATURES winner_mode_sf;

  /*!
   * In-loop filter speed features:
   */
  LOOP_FILTER_SPEED_FEATURES lpf_sf;
  /*!
   * flexible MV precisions speed features:
   */
  FLEXMV_PRECISION_SPEED_FEATURES flexmv_sf;

} SPEED_FEATURES;
/*!\cond */

struct AV1_COMP;

/*!\endcond */
/*!\brief Frame size independent speed vs quality trade off flags
 *
 *\ingroup speed_features
 *
 * \param[in]    cpi     Top - level encoder instance structure
 * \param[in]    speed   Speed setting passed in from the command  line
 *
 * No return value but configures the various speed trade off flags based
 * on the passed in speed setting. (Higher speed gives lower quality).
 */
void av1_set_speed_features_framesize_independent(struct AV1_COMP *cpi,
                                                  int speed);

/*!\brief Frame size dependent speed vs quality trade off flags
 *
 *\ingroup speed_features
 *
 * \param[in]    cpi     Top - level encoder instance structure
 * \param[in]    speed   Speed setting passed in from the command  line
 *
 * No return value but configures the various speed trade off flags based
 * on the passed in speed setting and frame size. (Higher speed corresponds
 * to lower quality).
 */
void av1_set_speed_features_framesize_dependent(struct AV1_COMP *cpi,
                                                int speed);
/*!\brief Q index dependent speed vs quality trade off flags
 *
 *\ingroup speed_features
 *
 * \param[in]    cpi     Top - level encoder instance structure
 * \param[in]    speed   Speed setting passed in from the command  line
 *
 * No return value but configures the various speed trade off flags based
 * on the passed in speed setting and current frame's Q index.
 * (Higher speed corresponds to lower quality).
 */
void av1_set_speed_features_qindex_dependent(struct AV1_COMP *cpi, int speed);

#ifdef __cplusplus
}  // extern "C"
#endif

#endif  // AOM_AV1_ENCODER_SPEED_FEATURES_H_