| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include "av1/arg_defs.h" |
| |
| static const struct arg_enum_list test_decode_enum[] = { |
| { "off", TEST_DECODE_OFF }, |
| { "fatal", TEST_DECODE_FATAL }, |
| { "warn", TEST_DECODE_WARN }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list bitdepth_enum[] = { |
| { "8", AOM_BITS_8 }, { "10", AOM_BITS_10 }, { "12", AOM_BITS_12 }, { NULL, 0 } |
| }; |
| |
| #if CONFIG_WEBM_IO |
| static const struct arg_enum_list stereo_mode_enum[] = { |
| { "mono", STEREO_FORMAT_MONO }, |
| { "left-right", STEREO_FORMAT_LEFT_RIGHT }, |
| { "bottom-top", STEREO_FORMAT_BOTTOM_TOP }, |
| { "top-bottom", STEREO_FORMAT_TOP_BOTTOM }, |
| { "right-left", STEREO_FORMAT_RIGHT_LEFT }, |
| { NULL, 0 } |
| }; |
| #endif |
| |
| static const struct arg_enum_list end_usage_enum[] = { { "vbr", AOM_VBR }, |
| { "cbr", AOM_CBR }, |
| { "cq", AOM_CQ }, |
| { "q", AOM_Q }, |
| { NULL, 0 } }; |
| |
| static const struct arg_enum_list tuning_enum[] = { |
| { "psnr", AOM_TUNE_PSNR }, |
| { "ssim", AOM_TUNE_SSIM }, |
| { "vmaf_with_preprocessing", AOM_TUNE_VMAF_WITH_PREPROCESSING }, |
| { "vmaf_without_preprocessing", AOM_TUNE_VMAF_WITHOUT_PREPROCESSING }, |
| { "vmaf", AOM_TUNE_VMAF_MAX_GAIN }, |
| { "vmaf_neg", AOM_TUNE_VMAF_NEG_MAX_GAIN }, |
| { NULL, 0 } |
| }; |
| |
| #if CONFIG_AV1_ENCODER |
| static const struct arg_enum_list timing_info_enum[] = { |
| { "unspecified", AOM_TIMING_UNSPECIFIED }, |
| { "constant", AOM_TIMING_EQUAL }, |
| { "model", AOM_TIMING_DEC_MODEL }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list superblock_size_enum[] = { |
| { "dynamic", AOM_SUPERBLOCK_SIZE_DYNAMIC }, |
| { "64", AOM_SUPERBLOCK_SIZE_64X64 }, |
| { "128", AOM_SUPERBLOCK_SIZE_128X128 }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list matrix_coefficients_enum[] = { |
| { "identity", AOM_CICP_MC_IDENTITY }, |
| { "bt709", AOM_CICP_MC_BT_709 }, |
| { "unspecified", AOM_CICP_MC_UNSPECIFIED }, |
| { "fcc73", AOM_CICP_MC_FCC }, |
| { "bt470bg", AOM_CICP_MC_BT_470_B_G }, |
| { "bt601", AOM_CICP_MC_BT_601 }, |
| { "smpte240", AOM_CICP_CP_SMPTE_240 }, |
| { "ycgco", AOM_CICP_MC_SMPTE_YCGCO }, |
| { "bt2020ncl", AOM_CICP_MC_BT_2020_NCL }, |
| { "bt2020cl", AOM_CICP_MC_BT_2020_CL }, |
| { "smpte2085", AOM_CICP_MC_SMPTE_2085 }, |
| { "chromncl", AOM_CICP_MC_CHROMAT_NCL }, |
| { "chromcl", AOM_CICP_MC_CHROMAT_CL }, |
| { "ictcp", AOM_CICP_MC_ICTCP }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list chroma_sample_position_enum[] = { |
| { "unknown", AOM_CSP_UNKNOWN }, |
| { "vertical", AOM_CSP_VERTICAL }, |
| { "colocated", AOM_CSP_COLOCATED }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list tune_content_enum[] = { |
| { "default", AOM_CONTENT_DEFAULT }, |
| { "screen", AOM_CONTENT_SCREEN }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list transfer_characteristics_enum[] = { |
| { "unspecified", AOM_CICP_CP_UNSPECIFIED }, |
| { "bt709", AOM_CICP_TC_BT_709 }, |
| { "bt470m", AOM_CICP_TC_BT_470_M }, |
| { "bt470bg", AOM_CICP_TC_BT_470_B_G }, |
| { "bt601", AOM_CICP_TC_BT_601 }, |
| { "smpte240", AOM_CICP_TC_SMPTE_240 }, |
| { "lin", AOM_CICP_TC_LINEAR }, |
| { "log100", AOM_CICP_TC_LOG_100 }, |
| { "log100sq10", AOM_CICP_TC_LOG_100_SQRT10 }, |
| { "iec61966", AOM_CICP_TC_IEC_61966 }, |
| { "bt1361", AOM_CICP_TC_BT_1361 }, |
| { "srgb", AOM_CICP_TC_SRGB }, |
| { "bt2020-10bit", AOM_CICP_TC_BT_2020_10_BIT }, |
| { "bt2020-12bit", AOM_CICP_TC_BT_2020_12_BIT }, |
| { "smpte2084", AOM_CICP_TC_SMPTE_2084 }, |
| { "hlg", AOM_CICP_TC_HLG }, |
| { "smpte428", AOM_CICP_TC_SMPTE_428 }, |
| { NULL, 0 } |
| }; |
| |
| static const struct arg_enum_list color_primaries_enum[] = { |
| { "bt709", AOM_CICP_CP_BT_709 }, |
| { "unspecified", AOM_CICP_CP_UNSPECIFIED }, |
| { "bt601", AOM_CICP_CP_BT_601 }, |
| { "bt470m", AOM_CICP_CP_BT_470_M }, |
| { "bt470bg", AOM_CICP_CP_BT_470_B_G }, |
| { "smpte240", AOM_CICP_CP_SMPTE_240 }, |
| { "film", AOM_CICP_CP_GENERIC_FILM }, |
| { "bt2020", AOM_CICP_CP_BT_2020 }, |
| { "xyz", AOM_CICP_CP_XYZ }, |
| { "smpte431", AOM_CICP_CP_SMPTE_431 }, |
| { "smpte432", AOM_CICP_CP_SMPTE_432 }, |
| { "ebu3213", AOM_CICP_CP_EBU_3213 }, |
| { NULL, 0 } |
| }; |
| #endif // CONFIG_AV1_ENCODER |
| |
| const av1_codec_arg_definitions_t g_av1_codec_arg_defs = { |
| .help = ARG_DEF(NULL, "help", 0, "Show usage options and exit"), |
| .debugmode = |
| ARG_DEF("D", "debug", 0, "Debug mode (makes output deterministic)"), |
| .outputfile = ARG_DEF("o", "output", 1, "Output filename"), |
| .reconfile = ARG_DEF(NULL, "recon", 1, "Recon filename"), |
| .use_yv12 = ARG_DEF(NULL, "yv12", 0, "Input file is YV12 "), |
| .use_i420 = ARG_DEF(NULL, "i420", 0, "Input file is I420 (default)"), |
| .use_i422 = ARG_DEF(NULL, "i422", 0, "Input file is I422"), |
| .use_i444 = ARG_DEF(NULL, "i444", 0, "Input file is I444"), |
| .codecarg = ARG_DEF(NULL, "codec", 1, "Codec to use"), |
| .passes = ARG_DEF("p", "passes", 1, "Number of passes (must be 1)"), |
| .pass_arg = |
| ARG_DEF(NULL, "pass", 1, |
| "Pass to execute (0/1). 0 (default) indicates all passes"), |
| .fpf_name = ARG_DEF(NULL, "fpf", 1, "First pass statistics file name"), |
| .limit = ARG_DEF(NULL, "limit", 1, "Stop encoding after n input frames"), |
| .skip = ARG_DEF(NULL, "skip", 1, "Skip the first n input frames"), |
| .step = ARG_DEF(NULL, "step", 1, |
| "Encode every n-th frame (after the --skip frames)"), |
| .good_dl = ARG_DEF(NULL, "good", 0, "Use Good Quality Deadline"), |
| .rt_dl = ARG_DEF(NULL, "rt", 0, "Use Realtime Quality Deadline"), |
| .quietarg = ARG_DEF("q", "quiet", 0, "Do not print encode progress"), |
| .verbosearg = ARG_DEF("v", "verbose", 0, "Show encoder parameters"), |
| .psnrarg = ARG_DEF(NULL, "psnr", 0, "Show PSNR in status line"), |
| .use_cfg = ARG_DEF("c", "cfg", 1, "Config file to use"), |
| .recontest = ARG_DEF_ENUM(NULL, "test-decode", 1, |
| "Test encode/decode mismatch", test_decode_enum), |
| .framerate = ARG_DEF(NULL, "fps", 1, "Stream frame rate (rate/scale)"), |
| .use_webm = |
| ARG_DEF(NULL, "webm", 0, "Output WebM (default when WebM IO is enabled)"), |
| .use_ivf = ARG_DEF(NULL, "ivf", 0, "Output IVF"), |
| .use_obu = ARG_DEF(NULL, "obu", 0, "Output OBU"), |
| .q_hist_n = |
| ARG_DEF(NULL, "q-hist", 1, "Show quantizer histogram (n-buckets)"), |
| .rate_hist_n = |
| ARG_DEF(NULL, "rate-hist", 1, "Show rate histogram (n-buckets)"), |
| .disable_warnings = |
| ARG_DEF(NULL, "disable-warnings", 0, |
| "Disable warnings about potentially incorrect encode settings."), |
| .disable_warning_prompt = |
| ARG_DEF("y", "disable-warning-prompt", 0, |
| "Display warnings, but do not prompt user to continue."), |
| .bitdeptharg = ARG_DEF_ENUM( |
| "b", "bit-depth", 1, |
| "Bit depth for codec (8 for version <=1, 10 or 12 for version 2)", |
| bitdepth_enum), |
| .inbitdeptharg = ARG_DEF(NULL, "input-bit-depth", 1, "Bit depth of input"), |
| |
| .input_chroma_subsampling_x = ARG_DEF(NULL, "input-chroma-subsampling-x", 1, |
| "chroma subsampling x value."), |
| .input_chroma_subsampling_y = ARG_DEF(NULL, "input-chroma-subsampling-y", 1, |
| "chroma subsampling y value."), |
| |
| .usage = ARG_DEF("u", "usage", 1, "Usage profile number to use"), |
| .threads = ARG_DEF("t", "threads", 1, "Max number of threads to use"), |
| .profile = ARG_DEF(NULL, "profile", 1, "Bitstream profile number to use"), |
| .width = ARG_DEF("w", "width", 1, "Frame width"), |
| .height = ARG_DEF("h", "height", 1, "Frame height"), |
| .forced_max_frame_width = ARG_DEF(NULL, "forced_max_frame_width", 1, |
| "Maximum frame width value to force"), |
| .forced_max_frame_height = ARG_DEF(NULL, "forced_max_frame_height", 1, |
| "Maximum frame height value to force"), |
| #if CONFIG_WEBM_IO |
| .stereo_mode = ARG_DEF_ENUM(NULL, "stereo-mode", 1, "Stereo 3D video format", |
| stereo_mode_enum), |
| #endif |
| .timebase = ARG_DEF(NULL, "timebase", 1, |
| "Output timestamp precision (fractional seconds)"), |
| .global_error_resilient = ARG_DEF(NULL, "global-error-resilient", 1, |
| "Enable global error resiliency features"), |
| .lag_in_frames = |
| ARG_DEF(NULL, "lag-in-frames", 1, "Max number of frames to lag"), |
| .large_scale_tile = ARG_DEF( |
| NULL, "large-scale-tile", 1, |
| "Large scale tile coding (0: off (default), 1: on (ivf output only))"), |
| .monochrome = |
| ARG_DEF(NULL, "monochrome", 0, "Monochrome video (no chroma planes)"), |
| .full_still_picture_hdr = ARG_DEF(NULL, "full-still-picture-hdr", 0, |
| "Use full header for still picture"), |
| .use_16bit_internal = |
| ARG_DEF(NULL, "use-16bit-internal", 0, "Force use of 16-bit pipeline"), |
| .dropframe_thresh = |
| ARG_DEF(NULL, "drop-frame", 1, "Temporal resampling threshold (buf %)"), |
| .resize_mode = ARG_DEF(NULL, "resize-mode", 1, "Frame resize mode"), |
| .resize_denominator = |
| ARG_DEF(NULL, "resize-denominator", 1, "Frame resize denominator"), |
| .resize_kf_denominator = ARG_DEF(NULL, "resize-kf-denominator", 1, |
| "Frame resize keyframe denominator"), |
| .superres_mode = |
| ARG_DEF(NULL, "superres-mode", 1, "Frame super-resolution mode"), |
| .superres_denominator = ARG_DEF(NULL, "superres-denominator", 1, |
| "Frame super-resolution denominator"), |
| .superres_kf_denominator = |
| ARG_DEF(NULL, "superres-kf-denominator", 1, |
| "Frame super-resolution keyframe denominator"), |
| .superres_qthresh = ARG_DEF(NULL, "superres-qthresh", 1, |
| "Frame super-resolution qindex threshold"), |
| .superres_kf_qthresh = |
| ARG_DEF(NULL, "superres-kf-qthresh", 1, |
| "Frame super-resolution keyframe qindex threshold"), |
| .end_usage = |
| ARG_DEF_ENUM(NULL, "end-usage", 1, "Rate control mode", end_usage_enum), |
| .target_bitrate = ARG_DEF(NULL, "target-bitrate", 1, "Bitrate (kbps)"), |
| .min_q_level = |
| ARG_DEF(NULL, "min-q", 1, |
| "Minimum (best) quantizer in range [0, 63] (DEPRECATED)"), |
| .max_q_level = |
| ARG_DEF(NULL, "max-q", 1, |
| "Maximum (worst) quantizer in range [0, 63] (DEPRECATED)"), |
| .min_qp_level = ARG_DEF(NULL, "min-qp", 1, |
| "Minimum (best) quantizer in range [M, 255], " |
| "where M = 0/-48/-96 for 8/10/12 bit"), |
| .max_qp_level = ARG_DEF(NULL, "max-qp", 1, |
| "Maximum (worst) quantizer in range [M, 255], " |
| "where M = 0/-48/-96 for 8/10/12 bit"), |
| .undershoot_pct = ARG_DEF(NULL, "undershoot-pct", 1, |
| "Datarate undershoot (min) target (%)"), |
| .overshoot_pct = |
| ARG_DEF(NULL, "overshoot-pct", 1, "Datarate overshoot (max) target (%)"), |
| .buf_sz = ARG_DEF(NULL, "buf-sz", 1, "Client buffer size (ms)"), |
| .buf_initial_sz = |
| ARG_DEF(NULL, "buf-initial-sz", 1, "Client initial buffer size (ms)"), |
| .buf_optimal_sz = |
| ARG_DEF(NULL, "buf-optimal-sz", 1, "Client optimal buffer size (ms)"), |
| .minsection_pct = |
| ARG_DEF(NULL, "minsection-pct", 1, "GOP min bitrate (% of target)"), |
| .maxsection_pct = |
| ARG_DEF(NULL, "maxsection-pct", 1, "GOP max bitrate (% of target)"), |
| .fwd_kf_enabled = |
| ARG_DEF(NULL, "enable-fwd-kf", 1, "Enable forward reference keyframes"), |
| .kf_min_dist = |
| ARG_DEF(NULL, "kf-min-dist", 1, "Minimum keyframe interval (frames)"), |
| .kf_max_dist = |
| ARG_DEF(NULL, "kf-max-dist", 1, "Maximum keyframe interval (frames)"), |
| .kf_disabled = ARG_DEF(NULL, "disable-kf", 0, "Disable keyframe placement"), |
| .sframe_dist = ARG_DEF(NULL, "sframe-dist", 1, "S-Frame interval (frames)"), |
| .sframe_mode = |
| ARG_DEF(NULL, "sframe-mode", 1, "S-Frame insertion mode (1..2)"), |
| .save_as_annexb = ARG_DEF(NULL, "annexb", 1, "Save as Annex-B"), |
| .noise_sens = ARG_DEF(NULL, "noise-sensitivity", 1, |
| "Noise sensitivity (frames to blur)"), |
| .sharpness = ARG_DEF(NULL, "sharpness", 1, "Loop filter sharpness (0..7)"), |
| .static_thresh = |
| ARG_DEF(NULL, "static-thresh", 1, "Motion detection threshold"), |
| .auto_altref = |
| ARG_DEF(NULL, "auto-alt-ref", 1, "Enable automatic alt reference frames"), |
| .arnr_maxframes = |
| ARG_DEF(NULL, "arnr-maxframes", 1, "AltRef max frames (0..15)"), |
| .arnr_strength = |
| ARG_DEF(NULL, "arnr-strength", 1, "AltRef filter strength (0..6)"), |
| .tune_metric = ARG_DEF_ENUM(NULL, "tune", 1, "Distortion metric tuned with", |
| tuning_enum), |
| .cq_level = ARG_DEF( |
| NULL, "cq-level", 1, |
| "Constant/Constrained Quality level in range [0, 63] (DEPRECATED)"), |
| .qp_level = ARG_DEF(NULL, "qp", 1, |
| "Constant/Constrained Quality level " |
| "in range [M, 255], where M = 0/-48/-96 for 8/10/12 bit"), |
| .max_intra_rate_pct = |
| ARG_DEF(NULL, "max-intra-rate", 1, "Max I-frame bitrate (pct)"), |
| #if CONFIG_AV1_ENCODER |
| .cpu_used_av1 = |
| ARG_DEF(NULL, "cpu-used", 1, |
| "Speed setting (0..6 in good mode, 6..9 in realtime mode)"), |
| .rowmtarg = |
| ARG_DEF(NULL, "row-mt", 1, |
| "Enable row based multi-threading (0: off, 1: on (default))"), |
| .tile_cols = |
| ARG_DEF(NULL, "tile-columns", 1, "Number of tile columns to use, log2"), |
| .tile_rows = |
| ARG_DEF(NULL, "tile-rows", 1, "Number of tile rows to use, log2"), |
| .enable_tpl_model = ARG_DEF(NULL, "enable-tpl-model", 1, |
| "RDO based on frame temporal dependency " |
| "(0: off, 1: backward source based). " |
| "This is required for deltaq mode."), |
| .enable_keyframe_filtering = ARG_DEF( |
| NULL, "enable-keyframe-filtering", 1, |
| "Apply temporal filtering on key frame" |
| "(0: no filter, 1: filter without overlay (default), " |
| "2: filter with overlay - experimental, may break random access in " |
| "players.)"), |
| .tile_width = ARG_DEF(NULL, "tile-width", 1, "Tile widths (comma separated)"), |
| .tile_height = |
| ARG_DEF(NULL, "tile-height", 1, "Tile heights (command separated)"), |
| .lossless = ARG_DEF(NULL, "lossless", 1, |
| "Lossless mode (0: false (default), 1: true)"), |
| .enable_deblocking = |
| ARG_DEF(NULL, "enable-deblocking", 1, |
| "Enable the deblocking filter (0: false, 1: true (default))"), |
| .enable_cdef = ARG_DEF( |
| NULL, "enable-cdef", 1, |
| "Enable the constrained directional enhancement filter (0: false, " |
| "1: true (default))"), |
| .enable_restoration = ARG_DEF(NULL, "enable-restoration", 1, |
| "Enable the loop restoration filter (0: false " |
| "(default in Realtime mode), " |
| "1: true (default in Non-realtime mode))"), |
| .enable_rect_partitions = ARG_DEF(NULL, "enable-rect-partitions", 1, |
| "Enable rectangular partitions " |
| "(0: false, 1: true (default))"), |
| .enable_ab_partitions = |
| ARG_DEF(NULL, "enable-ab-partitions", 1, |
| "Enable ab partitions (0: false, 1: true (default))"), |
| .enable_1to4_partitions = ARG_DEF(NULL, "enable-1to4-partitions", 1, |
| "Enable 1:4 and 4:1 partitions " |
| "(0: false, 1: true (default))"), |
| #if CONFIG_SDP |
| .enable_sdp = ARG_DEF(NULL, "enable-sdp", 1, |
| "Enable semi decoupled partitioning for key frame" |
| "(0: false, 1: true (default))"), |
| #endif |
| .min_partition_size = |
| ARG_DEF(NULL, "min-partition-size", 1, |
| "Set min partition size " |
| "(4:4x4, 8:8x8, 16:16x16, 32:32x32, 64:64x64, 128:128x128). " |
| "On frame with 4k+ resolutions or higher speed settings, the min " |
| "partition size will have a minimum of 8."), |
| .max_partition_size = |
| ARG_DEF(NULL, "max-partition-size", 1, |
| "Set max partition size " |
| "(4:4x4, 8:8x8, 16:16x16, 32:32x32, 64:64x64, 128:128x128)"), |
| |
| #if !CONFIG_REMOVE_DUAL_FILTER |
| .enable_dual_filter = ARG_DEF(NULL, "enable-dual-filter", 1, |
| "Enable dual filter " |
| "(0: false, 1: true (default))"), |
| #endif // !CONFIG_REMOVE_DUAL_FILTER |
| |
| .enable_chroma_deltaq = ARG_DEF(NULL, "enable-chroma-deltaq", 1, |
| "Enable chroma delta quant " |
| "(0: false (default), 1: true)"), |
| .enable_intra_edge_filter = ARG_DEF(NULL, "enable-intra-edge-filter", 1, |
| "Enable intra edge filtering " |
| "(0: false, 1: true (default))"), |
| .enable_order_hint = ARG_DEF(NULL, "enable-order-hint", 1, |
| "Enable order hint " |
| "(0: false, 1: true (default))"), |
| .enable_tx64 = |
| ARG_DEF(NULL, "enable-tx64", 1, |
| "Enable 64-pt transform (0: false, 1: true (default))"), |
| .enable_flip_idtx = |
| ARG_DEF(NULL, "enable-flip-idtx", 1, |
| "Enable extended transform type (0: false, 1: true (default)) " |
| "including FLIPADST_DCT, DCT_FLIPADST, FLIPADST_FLIPADST, " |
| "ADST_FLIPADST, FLIPADST_ADST, IDTX, V_DCT, H_DCT, V_ADST, " |
| "H_ADST, V_FLIPADST, H_FLIPADST"), |
| |
| #if !CONFIG_REMOVE_DIST_WTD_COMP |
| .enable_dist_wtd_comp = ARG_DEF(NULL, "enable-dist-wtd-comp", 1, |
| "Enable distance-weighted compound " |
| "(0: false, 1: true (default))"), |
| #endif // !CONFIG_REMOVE_DIST_WTD_COMP |
| |
| .enable_masked_comp = ARG_DEF(NULL, "enable-masked-comp", 1, |
| "Enable masked (wedge/diff-wtd) compound " |
| "(0: false, 1: true (default))"), |
| .enable_onesided_comp = ARG_DEF(NULL, "enable-onesided-comp", 1, |
| "Enable one sided compound " |
| "(0: false, 1: true (default))"), |
| .enable_interintra_comp = ARG_DEF(NULL, "enable-interintra-comp", 1, |
| "Enable interintra compound " |
| "(0: false, 1: true (default))"), |
| .enable_smooth_interintra = ARG_DEF(NULL, "enable-smooth-interintra", 1, |
| "Enable smooth interintra mode " |
| "(0: false, 1: true (default))"), |
| .enable_diff_wtd_comp = ARG_DEF(NULL, "enable-diff-wtd-comp", 1, |
| "Enable difference-weighted compound " |
| "(0: false, 1: true (default))"), |
| .enable_interinter_wedge = ARG_DEF(NULL, "enable-interinter-wedge", 1, |
| "Enable interinter wedge compound " |
| "(0: false, 1: true (default))"), |
| .enable_interintra_wedge = ARG_DEF(NULL, "enable-interintra-wedge", 1, |
| "Enable interintra wedge compound " |
| "(0: false, 1: true (default))"), |
| .enable_global_motion = ARG_DEF(NULL, "enable-global-motion", 1, |
| "Enable global motion " |
| "(0: false, 1: true (default))"), |
| .enable_warped_motion = ARG_DEF(NULL, "enable-warped-motion", 1, |
| "Enable local warped motion " |
| "(0: false, 1: true (default))"), |
| .enable_filter_intra = ARG_DEF(NULL, "enable-filter-intra", 1, |
| "Enable filter intra prediction mode " |
| "(0: false, 1: true (default))"), |
| .enable_smooth_intra = ARG_DEF(NULL, "enable-smooth-intra", 1, |
| "Enable smooth intra prediction modes " |
| "(0: false, 1: true (default))"), |
| .enable_paeth_intra = ARG_DEF( |
| NULL, "enable-paeth-intra", 1, |
| "Enable Paeth intra prediction mode (0: false, 1: true (default))"), |
| .enable_cfl_intra = ARG_DEF(NULL, "enable-cfl-intra", 1, |
| "Enable chroma from luma intra prediction mode " |
| "(0: false, 1: true (default))"), |
| .force_video_mode = ARG_DEF(NULL, "force-video-mode", 1, |
| "Force video mode (0: false, 1: true (default))"), |
| .enable_obmc = ARG_DEF(NULL, "enable-obmc", 1, |
| "Enable OBMC (0: false, 1: true (default))"), |
| .enable_overlay = |
| ARG_DEF(NULL, "enable-overlay", 1, |
| "Enable coding overlay frames (0: false, 1: true (default))"), |
| .enable_palette = |
| ARG_DEF(NULL, "enable-palette", 1, |
| "Enable palette prediction mode (0: false, 1: true (default))"), |
| .enable_intrabc = ARG_DEF(NULL, "enable-intrabc", 1, |
| "Enable intra block copy prediction mode " |
| "(0: false, 1: true (default))"), |
| .enable_intrabc_ext = |
| ARG_DEF(NULL, "enable-intrabc-ext", 1, |
| "Dummy argument to support CTCv6 command-line. Has no effect."), |
| .enable_angle_delta = |
| ARG_DEF(NULL, "enable-angle-delta", 1, |
| "Enable intra angle delta (0: false, 1: true (default))"), |
| .enable_trellis_quant = |
| ARG_DEF(NULL, "enable-trellis-quant", 1, |
| "Enable trellis optimization of quantized coefficients " |
| "(0: no trellis, 1: enable trellis for all encoding stages, " |
| "2: enable trellis only in the last encoding pass, 3: disable " |
| "trellis in estimate_yrd_for_sb (default))"), |
| .enable_qm = |
| ARG_DEF(NULL, "enable-qm", 1, |
| "Enable quantisation matrices (0: false (default), 1: true)"), |
| .qm_min = ARG_DEF(NULL, "qm-min", 1, |
| "Min quant matrix flatness (0..15), default is 8"), |
| .qm_max = ARG_DEF(NULL, "qm-max", 1, |
| "Max quant matrix flatness (0..15), default is 15"), |
| .reduced_tx_type_set = ARG_DEF(NULL, "reduced-tx-type-set", 1, |
| "Use reduced set of transform types"), |
| .use_intra_dct_only = |
| ARG_DEF(NULL, "use-intra-dct-only", 1, "Use DCT only for INTRA modes"), |
| .use_inter_dct_only = |
| ARG_DEF(NULL, "use-inter-dct-only", 1, "Use DCT only for INTER modes"), |
| .use_intra_default_tx_only = |
| ARG_DEF(NULL, "use-intra-default-tx-only", 1, |
| "Use Default-transform only for INTRA modes"), |
| .quant_b_adapt = ARG_DEF(NULL, "quant-b-adapt", 1, "Use adaptive quantize_b"), |
| .coeff_cost_upd_freq = ARG_DEF(NULL, "coeff-cost-upd-freq", 1, |
| "Update freq for coeff costs" |
| "0: SB, 1: SB Row per Tile, 2: Tile"), |
| .mode_cost_upd_freq = ARG_DEF(NULL, "mode-cost-upd-freq", 1, |
| "Update freq for mode costs" |
| "0: SB, 1: SB Row per Tile, 2: Tile"), |
| .mv_cost_upd_freq = ARG_DEF(NULL, "mv-cost-upd-freq", 1, |
| "Update freq for mv costs" |
| "0: SB, 1: SB Row per Tile, 2: Tile, 3: Off"), |
| .num_tg = ARG_DEF(NULL, "num-tile-groups", 1, |
| "Maximum number of tile groups, default is 1"), |
| .mtu_size = |
| ARG_DEF(NULL, "mtu-size", 1, |
| "MTU size for a tile group, default is 0 (no MTU targeting), " |
| "overrides maximum number of tile groups"), |
| .timing_info = ARG_DEF_ENUM( |
| NULL, "timing-info", 1, |
| "Signal timing info in the bitstream (model unly works for no " |
| "hidden frames, no super-res yet):", |
| timing_info_enum), |
| #if CONFIG_TUNE_VMAF |
| .vmaf_model_path = |
| ARG_DEF(NULL, "vmaf-model-path", 1, "Path to the VMAF model file"), |
| #endif |
| .film_grain_test = ARG_DEF( |
| NULL, "film-grain-test", 1, |
| "Film grain test vectors (0: none (default), 1: test-1 2: test-2, " |
| "... 16: test-16)"), |
| .film_grain_table = ARG_DEF(NULL, "film-grain-table", 1, |
| "Path to file containing film grain parameters"), |
| #if CONFIG_DENOISE |
| .denoise_noise_level = |
| ARG_DEF(NULL, "denoise-noise-level", 1, |
| "Amount of noise (from 0 = don't denoise, to 50)"), |
| .denoise_block_size = ARG_DEF(NULL, "denoise-block-size", 1, |
| "Denoise block size (default = 32)"), |
| #endif |
| .enable_ref_frame_mvs = |
| ARG_DEF(NULL, "enable-ref-frame-mvs", 1, |
| "Enable temporal mv prediction (default is 1)"), |
| .frame_parallel_decoding = |
| ARG_DEF(NULL, "frame-parallel", 1, |
| "Enable frame parallel decodability features " |
| "(0: false (default), 1: true)"), |
| .error_resilient_mode = ARG_DEF(NULL, "error-resilient", 1, |
| "Enable error resilient features " |
| "(0: false (default), 1: true)"), |
| .aq_mode = ARG_DEF(NULL, "aq-mode", 1, |
| "Adaptive quantization mode (0: off (default), 1: " |
| "variance 2: complexity, " |
| "3: cyclic refresh)"), |
| .deltaq_mode = |
| ARG_DEF(NULL, "deltaq-mode", 1, |
| "Delta qindex mode (0: off, 1: deltaq objective (default), " |
| "2: deltaq perceptual). " |
| "Currently this requires enable-tpl-model as a prerequisite."), |
| .deltalf_mode = ARG_DEF(NULL, "delta-lf-mode", 1, |
| "Enable delta-lf-mode (0: off (default), 1: on)"), |
| .frame_periodic_boost = |
| ARG_DEF(NULL, "frame-boost", 1, |
| "Enable frame periodic boost (0: off (default), 1: on)"), |
| .gf_cbr_boost_pct = ARG_DEF(NULL, "gf-cbr-boost", 1, |
| "Boost for Golden Frame in CBR mode (pct)"), |
| .max_inter_rate_pct = |
| ARG_DEF(NULL, "max-inter-rate", 1, "Max P-frame bitrate (pct)"), |
| .min_gf_interval = ARG_DEF( |
| NULL, "min-gf-interval", 1, |
| "min gf/arf frame interval (default 0, indicating in-built behavior)"), |
| .max_gf_interval = ARG_DEF( |
| NULL, "max-gf-interval", 1, |
| "max gf/arf frame interval (default 0, indicating in-built behavior)"), |
| .gf_min_pyr_height = |
| ARG_DEF(NULL, "gf-min-pyr-height", 1, |
| "Min height for GF group pyramid structure (0 (default) to 5)"), |
| .gf_max_pyr_height = ARG_DEF( |
| NULL, "gf-max-pyr-height", 1, |
| "maximum height for GF group pyramid structure (0 to 5 (default))"), |
| .max_reference_frames = ARG_DEF(NULL, "max-reference-frames", 1, |
| "maximum number of reference frames allowed " |
| "per frame (3 to 7 (default))"), |
| .reduced_reference_set = |
| ARG_DEF(NULL, "reduced-reference-set", 1, |
| "Use reduced set of single and compound references (0: off " |
| "(default), 1: on)"), |
| .target_seq_level_idx = ARG_DEF( |
| NULL, "target-seq-level-idx", 1, |
| "Target sequence level index. " |
| "Possible values are in the form of \"ABxy\"(pad leading zeros if " |
| "less than 4 digits). " |
| "AB: Operating point(OP) index, " |
| "xy: Target level index for the OP. " |
| "E.g. \"0\" means target level index 0 for the 0th OP, " |
| "\"1021\" means target level index 21 for the 10th OP."), |
| .set_min_cr = ARG_DEF( |
| NULL, "min-cr", 1, |
| "Set minimum compression ratio. Take integer values. Default is 0. " |
| "If non-zero, encoder will try to keep the compression ratio of " |
| "each frame to be higher than the given value divided by 100."), |
| |
| .input_color_primaries = ARG_DEF_ENUM( |
| NULL, "color-primaries", 1, |
| "Color primaries (CICP) of input content:", color_primaries_enum), |
| |
| .input_transfer_characteristics = |
| ARG_DEF_ENUM(NULL, "transfer-characteristics", 1, |
| "Transfer characteristics (CICP) of input content:", |
| transfer_characteristics_enum), |
| |
| .input_matrix_coefficients = ARG_DEF_ENUM( |
| NULL, "matrix-coefficients", 1, |
| "Matrix coefficients (CICP) of input content:", matrix_coefficients_enum), |
| |
| .input_chroma_sample_position = |
| ARG_DEF_ENUM(NULL, "chroma-sample-position", 1, |
| "The chroma sample position when chroma 4:2:0 is signaled:", |
| chroma_sample_position_enum), |
| |
| .tune_content = ARG_DEF_ENUM(NULL, "tune-content", 1, "Tune content type", |
| tune_content_enum), |
| |
| .cdf_update_mode = |
| ARG_DEF(NULL, "cdf-update-mode", 1, |
| "CDF update mode for entropy coding " |
| "(0: no CDF update, 1: update CDF on all frames(default), " |
| "2: selectively update CDF on some frames"), |
| |
| .superblock_size = ARG_DEF_ENUM(NULL, "sb-size", 1, "Superblock size to use", |
| superblock_size_enum), |
| |
| .set_tier_mask = |
| ARG_DEF(NULL, "set-tier-mask", 1, |
| "Set bit mask to specify which tier each of the 32 possible " |
| "operating points conforms to. " |
| "Bit value 0(defualt): Main Tier, 1: High Tier."), |
| |
| .use_fixed_qp_offsets = |
| ARG_DEF(NULL, "use-fixed-qp-offsets", 1, |
| "Enable fixed QP offsets for frames at different levels of the " |
| "pyramid. Selected automatically from --qp if " |
| "--fixed-qp-offsets is not provided. If this option is not " |
| "specified (default), offsets are adaptively chosen by the " |
| "encoder."), |
| |
| .fixed_qp_offsets = ARG_DEF( |
| NULL, "fixed-qp-offsets", 1, |
| "Set fixed QP offsets for frames at different levels of the " |
| "pyramid. Comma-separated list of 5 offsets for keyframe, ALTREF, " |
| "and 3 levels of internal alt-refs. If this option is not " |
| "specified (default), offsets are adaptively chosen by the " |
| "encoder."), |
| |
| .vbr_corpus_complexity_lap = ARG_DEF( |
| NULL, "vbr-corpus-complexity-lap", 1, |
| "Set average corpus complexity per mb for single pass VBR using lap. " |
| "(0..10000), default is 0"), |
| |
| .subgop_config_str = |
| ARG_DEF(NULL, "subgop-config-str", 1, |
| "Set specified SubGOP configurations in string format provided " |
| "for various SubGOP lengths. " |
| "If this option is not specified (default), the configurations " |
| "are chosen by the encoder using a default algorithm."), |
| |
| .subgop_config_path = ARG_DEF( |
| NULL, "subgop-config-path", 1, |
| "Set specified SubGOP configurations in config file path provided " |
| "for various SubGOP lengths. " |
| "If this option is not specified (default), the configurations " |
| "are chosen by the encoder using a default algorithm.") |
| #endif // CONFIG_AV1_ENCODER |
| }; |