| 2011-03-07 v0.9.6 "Bali" | |
| Our second named release, focused on a faster, higher quality, encoder. | |
| - Upgrading: | |
| This release is backwards compatible with Aylesbury (v0.9.5). Users | |
| of older releases should refer to the Upgrading notes in this | |
| document for that release. | |
| - Enhancements: | |
| vpxenc --psnr shows a summary when encode completes | |
| --tune=ssim option to enable activity masking | |
| improved postproc visualizations for development | |
| updated support for Apple iOS to SDK 4.2 | |
| query decoder to determine which reference frames were updated | |
| implemented error tracking in the decoder | |
| fix pipe support on windows | |
| - Speed: | |
| Primary focus was on good quality mode, speed 0. Average improvement | |
| on x86 about 40%, up to 100% on user-generated content at that speed. | |
| Best quality mode speed improved 35%, and realtime speed 10-20%. This | |
| release also saw significant improvement in realtime encoding speed | |
| on ARM platforms. | |
| Improved encoder threading | |
| Dont pick encoder filter level when loopfilter is disabled. | |
| Avoid double copying of key frames into alt and golden buffer | |
| FDCT optimizations. | |
| x86 sse2 temporal filter | |
| SSSE3 version of fast quantizer | |
| vp8_rd_pick_best_mbsegmentation code restructure | |
| Adjusted breakout RD for SPLITMV | |
| Changed segmentation check order | |
| Improved rd_pick_intra4x4block | |
| Adds armv6 optimized variance calculation | |
| ARMv6 optimized sad16x16 | |
| ARMv6 optimized half pixel variance calculations | |
| Full search SAD function optimization in SSE4.1 | |
| Improve MV prediction accuracy to achieve performance gain | |
| Improve MV prediction in vp8_pick_inter_mode() for speed>3 | |
| - Quality: | |
| Best quality mode improved PSNR 6.3%, and SSIM 6.1%. This release | |
| also includes support for "activity masking," which greatly improves | |
| SSIM at the expense of PSNR. For now, this feature is available with | |
| the --tune=ssim option. Further experimentation in this area | |
| is ongoing. This release also introduces a new rate control mode | |
| called "CQ," which changes the allocation of bits within a clip to | |
| the sections where they will have the most visual impact. | |
| Tuning for the more exact quantizer. | |
| Relax rate control for last few frames | |
| CQ Mode | |
| Limit key frame quantizer for forced key frames. | |
| KF/GF Pulsing | |
| Add simple version of activity masking. | |
| make rdmult adaptive for intra in quantizer RDO | |
| cap the best quantizer for 2nd order DC | |
| change the threshold of DC check for encode breakout | |
| - Bug Fixes: | |
| Fix crash on Sparc Solaris. | |
| Fix counter of fixed keyframe distance | |
| ARNR filter pointer update bug fix | |
| Fixed use of motion percentage in KF/GF group calc | |
| Changed condition for using RD in Intra Mode | |
| Fix encoder real-time only configuration. | |
| Fix ARM encoder crash with multiple token partitions | |
| Fixed bug first cluster timecode of webm file is wrong. | |
| Fixed various encoder bugs with odd-sized images | |
| vp8e_get_preview fixed when spatial resampling enabled | |
| quantizer: fix assertion in fast quantizer path | |
| Allocate source buffers to be multiples of 16 | |
| Fix for manual Golden frame frequency | |
| Fix drastic undershoot in long form content | |
| 2010-10-28 v0.9.5 "Aylesbury" | |
| Our first named release, focused on a faster decoder, and a better encoder. | |
| - Upgrading: | |
| This release incorporates backwards-incompatible changes to the | |
| ivfenc and ivfdec tools. These tools are now called vpxenc and vpxdec. | |
| vpxdec | |
| * the -q (quiet) option has been removed, and replaced with | |
| -v (verbose). the output is quiet by default. Use -v to see | |
| the version number of the binary. | |
| * The default behavior is now to write output to a single file | |
| instead of individual frames. The -y option has been removed. | |
| Y4M output is the default. | |
| * For raw I420/YV12 output instead of Y4M, the --i420 or --yv12 | |
| options must be specified. | |
| $ ivfdec -o OUTPUT INPUT | |
| $ vpxdec --i420 -o OUTPUT INPUT | |
| * If an output file is not specified, the default is to write | |
| Y4M to stdout. This makes piping more natural. | |
| $ ivfdec -y -o - INPUT | ... | |
| $ vpxdec INPUT | ... | |
| * The output file has additional flexibility for formatting the | |
| filename. It supports escape characters for constructing a | |
| filename from the width, height, and sequence number. This | |
| replaces the -p option. To get the equivalent: | |
| $ ivfdec -p frame INPUT | |
| $ vpxdec --i420 -o frame-%wx%h-%4.i420 INPUT | |
| vpxenc | |
| * The output file must be specified with -o, rather than as the | |
| last argument. | |
| $ ivfenc <options> INPUT OUTPUT | |
| $ vpxenc <options> -o OUTPUT INPUT | |
| * The output defaults to webm. To get IVF output, use the --ivf | |
| option. | |
| $ ivfenc <options> INPUT OUTPUT.ivf | |
| $ vpxenc <options> -o OUTPUT.ivf --ivf INPUT | |
| - Enhancements: | |
| ivfenc and ivfdec have been renamed to vpxenc, vpxdec. | |
| vpxdec supports .webm input | |
| vpxdec writes .y4m by default | |
| vpxenc writes .webm output by default | |
| vpxenc --psnr now shows the average/overall PSNR at the end | |
| ARM platforms now support runtime cpu detection | |
| vpxdec visualizations added for motion vectors, block modes, references | |
| vpxdec now silent by default | |
| vpxdec --progress shows frame-by-frame timing information | |
| vpxenc supports the distinction between --fps and --timebase | |
| NASM is now a supported assembler | |
| configure: enable PIC for shared libs by default | |
| configure: add --enable-small | |
| configure: support for ppc32-linux-gcc | |
| configure: support for sparc-solaris-gcc | |
| - Bugs: | |
| Improve handling of invalid frames | |
| Fix valgrind errors in the NEON loop filters. | |
| Fix loopfilter delta zero transitions | |
| Fix valgrind errors in vp8_sixtap_predict8x4_armv6(). | |
| Build fixes for darwin-icc | |
| - Speed: | |
| 20-40% (average 28%) improvement in libvpx decoder speed, | |
| including: | |
| Rewrite vp8_short_walsh4x4_sse2() | |
| Optimizations on the loopfilters. | |
| Miscellaneous improvements for Atom | |
| Add 4-tap version of 2nd-pass ARMv6 MC filter. | |
| Improved multithread utilization | |
| Better instruction choices on x86 | |
| reorder data to use wider instructions | |
| Update NEON wide idcts | |
| Make block access to frame buffer sequential | |
| Improved subset block search | |
| Bilinear subpixel optimizations for ssse3. | |
| Decrease memory footprint | |
| Encoder speed improvements (percentage gain not measured): | |
| Skip unnecessary search of identical frames | |
| Add SSE2 subtract functions | |
| Improve bounds checking in vp8_diamond_search_sadx4() | |
| Added vp8_fast_quantize_b_sse2 | |
| - Quality: | |
| Over 7% overall PSNR improvement (6.3% SSIM) in "best" quality | |
| encoding mode, and up to 60% improvement on very noisy, still | |
| or slow moving source video | |
| Motion compensated temporal filter for Alt-Ref Noise Reduction | |
| Improved use of trellis quantization on 2nd order Y blocks | |
| Tune effect of motion on KF/GF boost in two pass | |
| Allow coefficient optimization for good quality speed 0. | |
| Improved control of active min quantizer for two pass. | |
| Enable ARFs for non-lagged compress | |
| 2010-09-02 v0.9.2 | |
| - Enhancements: | |
| Disable frame dropping by default | |
| Improved multithreaded performance | |
| Improved Force Key Frame Behaviour | |
| Increased rate control buffer level precision | |
| Fix bug in 1st pass motion compensation | |
| ivfenc: correct fixed kf interval, --disable-kf | |
| - Speed: | |
| Changed above and left context data layout | |
| Rework idct calling structure. | |
| Removed unnecessary MB_MODE_INFO copies | |
| x86: SSSE3 sixtap prediction | |
| Reworked IDCT to include reconstruction (add) step | |
| Swap alt/gold/new/last frame buffer ptrs instead of copying. | |
| Improve SSE2 loopfilter functions | |
| Change bitreader to use a larger window. | |
| Avoid loopfilter reinitialization when possible | |
| - Quality: | |
| Normalize quantizer's zero bin and rounding factors | |
| Add trellis quantization. | |
| Make the quantizer exact. | |
| Updates to ARNR filtering algorithm | |
| Fix breakout thresh computation for golden & AltRef frames | |
| Redo the forward 4x4 dct | |
| Improve the accuracy of forward walsh-hadamard transform | |
| Further adjustment of RD behaviour with Q and Zbin. | |
| - Build System: | |
| Allow linking of libs built with MinGW to MSVC | |
| Fix target auto-detection on mingw32 | |
| Allow --cpu= to work for x86. | |
| configure: pass original arguments through to make dist | |
| Fix builds without runtime CPU detection | |
| msvs: fix install of codec sources | |
| msvs: Change devenv.com command line for better msys support | |
| msvs: Add vs9 targets. | |
| Add x86_64-linux-icc target | |
| - Bugs: | |
| Potential crashes on older MinGW builds | |
| Fix two-pass framrate for Y4M input. | |
| Fixed simple loop filter, other crashes on ARM v6 | |
| arm: fix missing dependency with --enable-shared | |
| configure: support directories containing .o | |
| Replace pinsrw (SSE) with MMX instructions | |
| apple: include proper mach primatives | |
| Fixed rate control bug with long key frame interval. | |
| Fix DSO link errors on x86-64 when not using a version script | |
| Fixed buffer selection for UV in AltRef filtering | |
| 2010-06-17 v0.9.1 | |
| - Enhancements: | |
| * ivfenc/ivfdec now support YUV4MPEG2 input and pipe I/O | |
| * Speed optimizations | |
| - Bugfixes: | |
| * Rate control | |
| * Prevent out-of-bounds accesses on invalid data | |
| - Build system updates: | |
| * Detect toolchain to be used automatically for native builds | |
| * Support building shared libraries | |
| * Better autotools emulation (--prefix, --libdir, DESTDIR) | |
| - Updated LICENSE | |
| * http://webmproject.blogspot.com/2010/06/changes-to-webm-open-source-license.html | |
| 2010-05-18 v0.9.0 | |
| - Initial open source release. Welcome to WebM and VP8! | |