|  | # | 
|  | # Copyright (c) 2021, Alliance for Open Media. All rights reserved | 
|  | # | 
|  | # This source code is subject to the terms of the BSD 3-Clause Clear License and | 
|  | # the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear | 
|  | # License was not distributed with this source code in the LICENSE file, you can | 
|  | # obtain it at aomedia.org/license/software-license/bsd-3-c-c/.  If the Alliance | 
|  | # for Open Media Patent License 1.0 was not distributed with this source code in | 
|  | # the PATENTS file, you can obtain it at aomedia.org/license/patent-license/. | 
|  | # | 
|  | cmake_minimum_required(VERSION 3.16) | 
|  |  | 
|  | set(AOM_ROOT "${CMAKE_CURRENT_SOURCE_DIR}") | 
|  | set(AOM_CONFIG_DIR "${CMAKE_CURRENT_BINARY_DIR}") | 
|  | if("${AOM_ROOT}" STREQUAL "${AOM_CONFIG_DIR}") | 
|  | message( | 
|  | FATAL_ERROR | 
|  | "Building from within the aom source tree is not supported.\n" | 
|  | "Hint: Run these commands\n" | 
|  | "$ rm -rf CMakeCache.txt CMakeFiles\n" | 
|  | "$ mkdir -p ../aom_build\n" | 
|  | "$ cd ../aom_build\n" | 
|  | "And re-run CMake from the aom_build directory.") | 
|  | endif() | 
|  |  | 
|  | project(AVM C CXX ASM) | 
|  |  | 
|  | # GENERATED source property global visibility. | 
|  | if(POLICY CMP0118) | 
|  | cmake_policy(SET CMP0118 NEW) | 
|  | endif() | 
|  |  | 
|  | if(NOT EMSCRIPTEN) | 
|  | if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES) | 
|  | set(CMAKE_BUILD_TYPE | 
|  | "Release" | 
|  | CACHE STRING "Build type: Debug, Release, RelWithDebInfo or MinSizeRel" | 
|  | FORCE) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | # Updating version info. | 
|  | # https://www.gnu.org/software/libtool/manual/libtool.html#Updating-version-info | 
|  | set(SO_VERSION 2) | 
|  | set(SO_FILE_VERSION 2.0.0) | 
|  |  | 
|  | # Enable generators like Xcode and Visual Studio to place projects in folders. | 
|  | set_property(GLOBAL PROPERTY USE_FOLDERS TRUE) | 
|  |  | 
|  | include("${AOM_ROOT}/build/cmake/aom_configure.cmake") | 
|  | include("${AOM_ROOT}/aom_dsp/aom_dsp.cmake") | 
|  | include("${AOM_ROOT}/aom_mem/aom_mem.cmake") | 
|  | include("${AOM_ROOT}/aom_ports/aom_ports.cmake") | 
|  | include("${AOM_ROOT}/aom_scale/aom_scale.cmake") | 
|  | include("${AOM_ROOT}/aom_util/aom_util.cmake") | 
|  | include("${AOM_ROOT}/av1/av1.cmake") | 
|  | include("${AOM_ROOT}/build/cmake/aom_install.cmake") | 
|  | include("${AOM_ROOT}/build/cmake/sanitizers.cmake") | 
|  | include("${AOM_ROOT}/build/cmake/util.cmake") | 
|  | include("${AOM_ROOT}/test/test.cmake") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_RTCD_SOURCES | 
|  | "${AOM_CONFIG_DIR}/config/aom_dsp_rtcd.h" | 
|  | "${AOM_CONFIG_DIR}/config/aom_scale_rtcd.h" | 
|  | "${AOM_CONFIG_DIR}/config/av1_rtcd.h" | 
|  | "${AOM_ROOT}/aom_dsp/aom_dsp_rtcd_defs.pl" | 
|  | "${AOM_ROOT}/aom_dsp/aom_dsp_rtcd.c" | 
|  | "${AOM_ROOT}/aom_scale/aom_scale_rtcd.pl" | 
|  | "${AOM_ROOT}/aom_scale/aom_scale_rtcd.c" | 
|  | "${AOM_ROOT}/av1/common/av1_rtcd_defs.pl" | 
|  | "${AOM_ROOT}/av1/common/av1_rtcd.c" | 
|  | "${AOM_ROOT}/build/cmake/rtcd.pl") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_LIBWEBM_SOURCES | 
|  | "${AOM_ROOT}/third_party/libwebm/common/hdr_util.cc" | 
|  | "${AOM_ROOT}/third_party/libwebm/common/hdr_util.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/common/webmids.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvmuxer.cc" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvmuxer.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvmuxertypes.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvmuxerutil.cc" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvmuxerutil.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvwriter.cc" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvmuxer/mkvwriter.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvparser/mkvparser.cc" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvparser/mkvparser.h" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvparser/mkvreader.cc" | 
|  | "${AOM_ROOT}/third_party/libwebm/mkvparser/mkvreader.h") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_LIBYUV_SOURCES | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/basic_types.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/convert.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/convert_argb.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/convert_from.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/cpu_id.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/planar_functions.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/rotate.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/row.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/scale.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/include/libyuv/scale_row.h" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/cpu_id.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/planar_functions.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_any.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_common.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_gcc.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_mips.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_neon.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_neon64.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/row_win.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_any.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_common.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_gcc.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_mips.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_neon.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_neon64.cc" | 
|  | "${AOM_ROOT}/third_party/libyuv/source/scale_win.cc") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_SOURCES | 
|  | "${AOM_CONFIG_DIR}/config/aom_config.c" | 
|  | "${AOM_CONFIG_DIR}/config/aom_config.h" | 
|  | "${AOM_ROOT}/aom/aom.h" | 
|  | "${AOM_ROOT}/aom/aom_codec.h" | 
|  | "${AOM_ROOT}/aom/aom_decoder.h" | 
|  | "${AOM_ROOT}/aom/aom_encoder.h" | 
|  | "${AOM_ROOT}/aom/aom_frame_buffer.h" | 
|  | "${AOM_ROOT}/aom/aom_image.h" | 
|  | "${AOM_ROOT}/aom/aom_integer.h" | 
|  | "${AOM_ROOT}/aom/aomcx.h" | 
|  | "${AOM_ROOT}/aom/aomdx.h" | 
|  | "${AOM_ROOT}/aom/internal/aom_codec_internal.h" | 
|  | "${AOM_ROOT}/aom/internal/aom_image_internal.h" | 
|  | "${AOM_ROOT}/aom/src/aom_codec.c" | 
|  | "${AOM_ROOT}/aom/src/aom_decoder.c" | 
|  | "${AOM_ROOT}/aom/src/aom_encoder.c" | 
|  | "${AOM_ROOT}/aom/src/aom_image.c" | 
|  | "${AOM_ROOT}/aom/src/aom_integer.c") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_COMMON_APP_UTIL_SOURCES | 
|  | "${AOM_ROOT}/av1/arg_defs.h" | 
|  | "${AOM_ROOT}/av1/arg_defs.c" | 
|  | "${AOM_ROOT}/common/args_helper.c" | 
|  | "${AOM_ROOT}/common/args_helper.h" | 
|  | "${AOM_ROOT}/common/args.c" | 
|  | "${AOM_ROOT}/common/args.h" | 
|  | "${AOM_ROOT}/common/av1_config.c" | 
|  | "${AOM_ROOT}/common/av1_config.h" | 
|  | "${AOM_ROOT}/common/md5_utils.c" | 
|  | "${AOM_ROOT}/common/md5_utils.h" | 
|  | "${AOM_ROOT}/common/tools_common.c" | 
|  | "${AOM_ROOT}/common/tools_common.h" | 
|  | "${AOM_ROOT}/common/video_common.h" | 
|  | "${AOM_ROOT}/common/rawenc.c" | 
|  | "${AOM_ROOT}/common/rawenc.h" | 
|  | "${AOM_ROOT}/common/y4menc.c" | 
|  | "${AOM_ROOT}/common/y4menc.h") | 
|  |  | 
|  | list(APPEND AOM_LANCZOS_RESAMPLE_SOURCES | 
|  | "${AOM_ROOT}/common/lanczos_resample.c" | 
|  | "${AOM_ROOT}/common/lanczos_resample.h") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_DECODER_APP_UTIL_SOURCES | 
|  | "${AOM_ROOT}/common/ivfdec.c" | 
|  | "${AOM_ROOT}/common/ivfdec.h" | 
|  | "${AOM_ROOT}/common/obudec.c" | 
|  | "${AOM_ROOT}/common/obudec.h" | 
|  | "${AOM_ROOT}/common/video_reader.c" | 
|  | "${AOM_ROOT}/common/video_reader.h") | 
|  |  | 
|  | list( | 
|  | APPEND | 
|  | AOM_ENCODER_APP_UTIL_SOURCES | 
|  | "${AOM_ROOT}/common/ivfenc.c" | 
|  | "${AOM_ROOT}/common/ivfenc.h" | 
|  | "${AOM_ROOT}/common/video_writer.c" | 
|  | "${AOM_ROOT}/common/video_writer.h" | 
|  | "${AOM_ROOT}/common/warnings.c" | 
|  | "${AOM_ROOT}/common/warnings.h" | 
|  | "${AOM_ROOT}/common/y4minput.c" | 
|  | "${AOM_ROOT}/common/y4minput.h" | 
|  | "${AOM_ROOT}/common/stream_iter.c" | 
|  | "${AOM_ROOT}/examples/encoder_util.h" | 
|  | "${AOM_ROOT}/examples/encoder_util.c") | 
|  |  | 
|  | list(APPEND AOM_ENCODER_STATS_SOURCES "${AOM_ROOT}/stats/rate_hist.c" | 
|  | "${AOM_ROOT}/stats/rate_hist.h") | 
|  |  | 
|  | list(APPEND AOM_VERSION_SOURCES "${AOM_CONFIG_DIR}/config/aom_version.h") | 
|  |  | 
|  | list(APPEND AOM_WEBM_DECODER_SOURCES "${AOM_ROOT}/common/webmdec.cc" | 
|  | "${AOM_ROOT}/common/webmdec.h") | 
|  |  | 
|  | list(APPEND AOM_WEBM_ENCODER_SOURCES "${AOM_ROOT}/common/webmenc.cc" | 
|  | "${AOM_ROOT}/common/webmenc.h") | 
|  |  | 
|  | include_directories( | 
|  | ${AOM_ROOT} | 
|  | ${AOM_CONFIG_DIR} | 
|  | ${AOM_ROOT}/apps | 
|  | ${AOM_ROOT}/common | 
|  | ${AOM_ROOT}/examples | 
|  | ${AOM_ROOT}/stats | 
|  | ${AOM_ROOT}/third_party/abseil-cpp) | 
|  |  | 
|  | # Targets | 
|  | add_library(aom_version ${AOM_VERSION_SOURCES}) | 
|  | add_dummy_source_file_to_target(aom_version c) | 
|  | add_custom_command( | 
|  | OUTPUT "${AOM_CONFIG_DIR}/config/aom_version.h" | 
|  | COMMAND | 
|  | ${CMAKE_COMMAND} ARGS -DAOM_CONFIG_DIR=${AOM_CONFIG_DIR} | 
|  | -DAOM_ROOT=${AOM_ROOT} -DGIT_EXECUTABLE=${GIT_EXECUTABLE} | 
|  | -DPERL_EXECUTABLE=${PERL_EXECUTABLE} -P | 
|  | "${AOM_ROOT}/build/cmake/version.cmake" | 
|  | COMMENT "Writing aom_version.h" | 
|  | VERBATIM) | 
|  |  | 
|  | add_custom_target( | 
|  | aom_version_check | 
|  | COMMAND | 
|  | ${CMAKE_COMMAND} -DAOM_CONFIG_DIR=${AOM_CONFIG_DIR} -DAOM_ROOT=${AOM_ROOT} | 
|  | -DGIT_EXECUTABLE=${GIT_EXECUTABLE} -DPERL_EXECUTABLE=${PERL_EXECUTABLE} -P | 
|  | "${AOM_ROOT}/build/cmake/version.cmake" | 
|  | COMMENT "Updating version info if necessary." | 
|  | VERBATIM) | 
|  |  | 
|  | if(BUILD_SHARED_LIBS AND NOT MSVC) | 
|  | # Generate version file immediately for non-MSVC shared builds: The version | 
|  | # string is needed for the aom target. | 
|  | execute_process( | 
|  | COMMAND | 
|  | ${CMAKE_COMMAND} -DAOM_CONFIG_DIR=${AOM_CONFIG_DIR} | 
|  | -DAOM_ROOT=${AOM_ROOT} -DGIT_EXECUTABLE=${GIT_EXECUTABLE} | 
|  | -DPERL_EXECUTABLE=${PERL_EXECUTABLE} -P | 
|  | "${AOM_ROOT}/build/cmake/version.cmake") | 
|  | endif() | 
|  |  | 
|  | add_dependencies(aom_version aom_version_check) | 
|  |  | 
|  | # TODO(tomfinegan): Move rtcd target setup where it belongs for each rtcd | 
|  | # source. | 
|  | add_rtcd_build_step( | 
|  | "${AOM_ROOT}/aom_dsp/aom_dsp_rtcd_defs.pl" | 
|  | "${AOM_CONFIG_DIR}/config/aom_dsp_rtcd.h" | 
|  | "${AOM_ROOT}/aom_dsp/aom_dsp_rtcd.c" "aom_dsp_rtcd") | 
|  | add_rtcd_build_step( | 
|  | "${AOM_ROOT}/aom_scale/aom_scale_rtcd.pl" | 
|  | "${AOM_CONFIG_DIR}/config/aom_scale_rtcd.h" | 
|  | "${AOM_ROOT}/aom_scale/aom_scale_rtcd.c" "aom_scale_rtcd") | 
|  | add_rtcd_build_step( | 
|  | "${AOM_ROOT}/av1/common/av1_rtcd_defs.pl" | 
|  | "${AOM_CONFIG_DIR}/config/av1_rtcd.h" "${AOM_ROOT}/av1/common/av1_rtcd.c" | 
|  | "av1_rtcd") | 
|  |  | 
|  | add_library(aom_rtcd OBJECT ${AOM_RTCD_SOURCES}) | 
|  | add_dependencies(aom_rtcd aom_version) | 
|  |  | 
|  | if(ENABLE_EXAMPLES) | 
|  | add_library(aom_encoder_stats OBJECT ${AOM_ENCODER_STATS_SOURCES}) | 
|  | set(AOM_LIB_TARGETS ${AOM_LIB_TARGETS} aom_encoder_stats) | 
|  | endif() | 
|  |  | 
|  | add_library(aom ${AOM_SOURCES} $<TARGET_OBJECTS:aom_rtcd>) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | add_library(aom_static STATIC ${AOM_SOURCES} $<TARGET_OBJECTS:aom_rtcd>) | 
|  | set_target_properties(aom_static PROPERTIES OUTPUT_NAME aom) | 
|  |  | 
|  | if(NOT MSVC) | 
|  | # Extract version string and set VERSION/SOVERSION for the aom target. | 
|  | extract_version_string("${AOM_CONFIG_DIR}/config/aom_version.h" | 
|  | aom_version_triple) | 
|  |  | 
|  | # Strip any trailing version information, if present. | 
|  | string(FIND "${aom_version_triple}" "-" dash_pos) | 
|  | if(NOT dash_pos EQUAL -1) | 
|  | string(SUBSTRING "${aom_version_triple}" 0 ${dash_pos} aom_version_triple) | 
|  | endif() | 
|  |  | 
|  | # cmake-format: off | 
|  | # VERSION is embedded in the .so file name. | 
|  | # libaom.so -> libaom.so.SOVERSION | 
|  | # libaom.so.SOVERSION -> libaom.so.VERSION | 
|  | # libaom.so.VERSION | 
|  | # cmake-format: on | 
|  | set_target_properties(aom PROPERTIES SOVERSION ${SO_VERSION}) | 
|  | set_target_properties(aom PROPERTIES VERSION ${SO_FILE_VERSION}) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(NOT WIN32 AND NOT APPLE) | 
|  | target_link_libraries(aom ${AOM_LIB_LINK_TYPE} m) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | target_link_libraries(aom_static ${AOM_LIB_LINK_TYPE} m) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | # List of object and static library targets. | 
|  | set(AOM_LIB_TARGETS ${AOM_LIB_TARGETS} aom_rtcd aom_mem aom_scale aom) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | set(AOM_LIB_TARGETS ${AOM_LIB_TARGETS} aom_static) | 
|  | endif() | 
|  |  | 
|  | add_library(lanczos_resample OBJECT ${AOM_LANCZOS_RESAMPLE_SOURCES}) | 
|  | list(APPEND AOM_LIB_TARGETS lanczos_resample) | 
|  | target_sources(aom PRIVATE $<TARGET_OBJECTS:lanczos_resample>) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | target_sources(aom_static PRIVATE $<TARGET_OBJECTS:lanczos_resample>) | 
|  | endif() | 
|  |  | 
|  | # Setup dependencies. | 
|  | setup_aom_dsp_targets() | 
|  | setup_aom_mem_targets() | 
|  | setup_aom_ports_targets() | 
|  | setup_aom_util_targets() | 
|  | setup_aom_scale_targets() | 
|  | setup_av1_targets() | 
|  |  | 
|  | # Make all library targets depend on aom_rtcd to make sure it builds first. | 
|  | foreach(aom_lib ${AOM_LIB_TARGETS}) | 
|  | if(NOT "${aom_lib}" STREQUAL "aom_rtcd") | 
|  | add_dependencies(${aom_lib} aom_rtcd) | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | # Generate C/C++ stub files containing the function usage_exit(). Users of the | 
|  | # aom_common_app_util library must define this function. This is a convenience | 
|  | # to allow omission of the function from applications that might want to use | 
|  | # other pieces of the util support without defining usage_exit(). | 
|  | file(WRITE "${AOM_GEN_SRC_DIR}/usage_exit.c" "void usage_exit(void) {}") | 
|  | file(WRITE "${AOM_GEN_SRC_DIR}/usage_exit.cc" | 
|  | "extern \"C\" void usage_exit(void) {}") | 
|  |  | 
|  | # | 
|  | # Application and application support targets. | 
|  | # | 
|  | if(ENABLE_EXAMPLES | 
|  | OR ENABLE_TESTS | 
|  | OR ENABLE_TOOLS) | 
|  | add_library(aom_common_app_util OBJECT ${AOM_COMMON_APP_UTIL_SOURCES}) | 
|  | set_property(TARGET ${example} PROPERTY FOLDER examples) | 
|  | if(CONFIG_AV1_DECODER) | 
|  | add_library(aom_decoder_app_util OBJECT ${AOM_DECODER_APP_UTIL_SOURCES}) | 
|  | set_property(TARGET ${example} PROPERTY FOLDER examples) | 
|  | # obudec depends on internal headers that require *rtcd.h | 
|  | add_dependencies(aom_decoder_app_util aom_rtcd) | 
|  | endif() | 
|  | if(CONFIG_AV1_ENCODER) | 
|  | add_library(aom_encoder_app_util OBJECT ${AOM_ENCODER_APP_UTIL_SOURCES}) | 
|  | set_property(TARGET ${example} PROPERTY FOLDER examples) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if((CONFIG_AV1_DECODER OR CONFIG_AV1_ENCODER) AND ENABLE_EXAMPLES) | 
|  | add_executable(resize_util "${AOM_ROOT}/examples/resize_util.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util>) | 
|  | set_property(TARGET ${example} PROPERTY FOLDER examples) | 
|  | list(APPEND AOM_APP_TARGETS resize_util) | 
|  | add_executable( | 
|  | lanczos_resample_y4m | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample.c" | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample.h" | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample_y4m.c") | 
|  | add_executable( | 
|  | lanczos_resample_yuv | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample.c" | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample.h" | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample_yuv.c") | 
|  | list(APPEND AOM_APP_TARGETS lanczos_resample_y4m lanczos_resample_yuv) | 
|  | add_executable( | 
|  | lanczos_resample_filter | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample.c" | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample.h" | 
|  | "${AOM_ROOT}/tools/lanczos/lanczos_resample_filter.c") | 
|  | list(APPEND AOM_APP_TARGETS lanczos_resample_filter) | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_AV1_DECODER AND ENABLE_EXAMPLES) | 
|  | add_executable( | 
|  | aomdec "${AOM_ROOT}/apps/aomdec.c" $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | target_sources(aomdec PRIVATE $<TARGET_OBJECTS:lanczos_resample>) | 
|  | add_executable( | 
|  | decode_to_md5 | 
|  | "${AOM_ROOT}/examples/decode_to_md5.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | add_executable( | 
|  | decode_with_drops | 
|  | "${AOM_ROOT}/examples/decode_with_drops.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | add_executable( | 
|  | simple_decoder | 
|  | "${AOM_ROOT}/examples/simple_decoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | add_executable( | 
|  | scalable_decoder | 
|  | "${AOM_ROOT}/examples/scalable_decoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  |  | 
|  | if(CONFIG_ANALYZER) | 
|  | add_executable( | 
|  | analyzer | 
|  | "${AOM_ROOT}/examples/analyzer.cc" $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | target_link_libraries(analyzer ${AOM_LIB_LINK_TYPE} ${wxWidgets_LIBRARIES}) | 
|  | list(APPEND AOM_APP_TARGETS analyzer) | 
|  | list(APPEND AOM_DECODER_EXAMPLE_TARGETS analyzer) | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_INSPECTION) | 
|  | add_executable( | 
|  | inspect | 
|  | "${AOM_ROOT}/examples/inspect.c" $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | list(APPEND AOM_DECODER_EXAMPLE_TARGETS inspect) | 
|  |  | 
|  | if(EMSCRIPTEN) | 
|  | add_preproc_definition(_POSIX_SOURCE) | 
|  | append_link_flag_to_target("inspect" "--emrun") | 
|  | append_link_flag_to_target("inspect" "-s USE_PTHREADS=0") | 
|  | append_link_flag_to_target("inspect" "-s WASM=1") | 
|  | append_link_flag_to_target("inspect" "-s MODULARIZE=1") | 
|  | append_link_flag_to_target("inspect" "-s ALLOW_MEMORY_GROWTH=1") | 
|  | append_link_flag_to_target( | 
|  | "inspect" "-s \'EXTRA_EXPORTED_RUNTIME_METHODS=[\"UTF8ToString\"]\'") | 
|  | append_link_flag_to_target("inspect" | 
|  | "-s EXPORT_NAME=\"\'DecoderModule\'\"") | 
|  | append_link_flag_to_target("inspect" "--memory-init-file 0") | 
|  |  | 
|  | if("${CMAKE_BUILD_TYPE}" STREQUAL "") | 
|  |  | 
|  | # Default to -O3 when no build type is specified. | 
|  | append_compiler_flag("-O3") | 
|  | endif() | 
|  |  | 
|  | em_link_post_js(inspect "${AOM_ROOT}/tools/inspect-post.js") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_EXTRACT_PROTO) | 
|  | list(APPEND AOM_EXTRACT_PROTO_SOURCES | 
|  | "${AOM_ROOT}/tools/extract_proto/extract_proto.cc" | 
|  | "${AOM_ROOT}/tools/extract_proto/enum_mappings.h") | 
|  | set(AVM_FRAME_PROTO_PATH "${AOM_ROOT}/tools/extract_proto/avm_frame.proto") | 
|  | find_package(Protobuf REQUIRED) | 
|  | set(CMAKE_CXX_STANDARD 17) | 
|  | set(CMAKE_CXX_STANDARD_REQUIRED ON) | 
|  | set(ABSL_PROPAGATE_CXX_STD ON) | 
|  | include_directories(${Protobuf_INCLUDE_DIRS}) | 
|  | protobuf_generate_cpp(AVM_FRAME_PROTO_SRCS AVM_FRAME_PROTO_HDRS | 
|  | ${AVM_FRAME_PROTO_PATH}) | 
|  | add_subdirectory(third_party/abseil-cpp) | 
|  | # Find Python and generate the enums mapping for extract_proto. | 
|  | find_package(Python3) | 
|  | if(NOT PYTHON3_FOUND) | 
|  | message(FATAL_ERROR "python3 is required to build extract_proto.") | 
|  | endif() | 
|  |  | 
|  | set(EXTRACT_PROTO_ENUMS_MAPPING_HEADER | 
|  | "${AOM_ROOT}/tools/extract_proto/enum_mappings.h") | 
|  | execute_process( | 
|  | COMMAND | 
|  | ${Python_EXECUTABLE} | 
|  | "${AOM_ROOT}/tools/extract_proto/generate_enum_mappings.py" | 
|  | --enums_header "${AOM_ROOT}/av1/common/av1_common_int.h" --enums_header | 
|  | "${AOM_ROOT}/av1/common/blockd.h" --enums_header | 
|  | "${AOM_ROOT}/av1/common/enums.h" --enums_header | 
|  | "${AOM_ROOT}/av1/common/filter.h" --enums_header | 
|  | "${AOM_ROOT}/av1/common/mv.h" --enums_header | 
|  | "${AOM_ROOT}/av1/decoder/accounting.h" --output | 
|  | "${AOM_ROOT}/tools/extract_proto/enum_mappings.h" | 
|  | OUTPUT_FILE ${EXTRACT_PROTO_ENUMS_MAPPING_HEADER}) | 
|  | add_executable( | 
|  | extract_proto | 
|  | ${AOM_EXTRACT_PROTO_SOURCES} ${AVM_FRAME_PROTO_SRCS} | 
|  | ${AVM_FRAME_PROTO_HDRS} $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | target_link_libraries( | 
|  | extract_proto | 
|  | PRIVATE absl::base | 
|  | absl::flags | 
|  | absl::flags_parse | 
|  | absl::log | 
|  | absl::log_flags | 
|  | absl::log_globals | 
|  | absl::log_initialize | 
|  | absl::status | 
|  | absl::statusor | 
|  | absl::strings | 
|  | ${Protobuf_LIBRARIES}) | 
|  |  | 
|  | list(APPEND AOM_APP_TARGETS extract_proto) | 
|  | endif() | 
|  |  | 
|  | # Maintain a list of decoder example targets. | 
|  | list( | 
|  | APPEND | 
|  | AOM_DECODER_EXAMPLE_TARGETS | 
|  | aomdec | 
|  | decode_to_md5 | 
|  | decode_with_drops | 
|  | scalable_decoder | 
|  | simple_decoder) | 
|  |  | 
|  | # Add decoder examples to the app targets list. | 
|  | list(APPEND AOM_APP_TARGETS ${AOM_DECODER_EXAMPLE_TARGETS}) | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_AV1_ENCODER) | 
|  | if(ENABLE_EXAMPLES) | 
|  | add_executable( | 
|  | aomenc | 
|  | "${AOM_ROOT}/apps/aomenc.c" $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_stats>) | 
|  | add_executable( | 
|  | lossless_encoder | 
|  | "${AOM_ROOT}/examples/lossless_encoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | add_executable( | 
|  | set_maps | 
|  | "${AOM_ROOT}/examples/set_maps.c" $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | add_executable( | 
|  | simple_encoder | 
|  | "${AOM_ROOT}/examples/simple_encoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | add_executable( | 
|  | twopass_encoder | 
|  | "${AOM_ROOT}/examples/twopass_encoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | add_executable( | 
|  | noise_model | 
|  | "${AOM_ROOT}/examples/noise_model.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | add_executable( | 
|  | scalable_encoder | 
|  | "${AOM_ROOT}/examples/scalable_encoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  |  | 
|  | # Maintain a list of encoder example targets. | 
|  | list( | 
|  | APPEND | 
|  | AOM_ENCODER_EXAMPLE_TARGETS | 
|  | aomenc | 
|  | lossless_encoder | 
|  | noise_model | 
|  | set_maps | 
|  | simple_encoder | 
|  | scalable_encoder | 
|  | twopass_encoder) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_TOOLS) | 
|  | if(CONFIG_ENTROPY_STATS AND NOT BUILD_SHARED_LIBS) | 
|  |  | 
|  | # TODO(tomfinegan): Sort out why a simple link command with | 
|  | # aom_entropy_optimizer.c won't work on macos, but dragging in all the | 
|  | # helper machinery allows the link to succeed. | 
|  | add_executable( | 
|  | aom_entropy_optimizer | 
|  | "${AOM_GEN_SRC_DIR}/usage_exit.c" | 
|  | "${AOM_ROOT}/tools/aom_entropy_optimizer.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  |  | 
|  | # Maintain a list of encoder tool targets. | 
|  | list(APPEND AOM_ENCODER_TOOL_TARGETS aom_entropy_optimizer) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | # Add encoder examples and tools to the targets list. | 
|  | list(APPEND AOM_APP_TARGETS ${AOM_ENCODER_EXAMPLE_TARGETS} | 
|  | ${AOM_ENCODER_TOOL_TARGETS}) | 
|  |  | 
|  | if(CONFIG_TENSORFLOW_LITE) | 
|  | # Building TFLite from third_party sources. Previously TFLite was fetched | 
|  | # from github as part of the build, using the following syntax: | 
|  | # cmake-format: off | 
|  | # include(FetchContent) | 
|  | # set(TFLITE_TAG "v2.17.0") | 
|  | # fetchcontent_declare( | 
|  | #   tflite | 
|  | #   GIT_REPOSITORY https://github.com/tensorflow/tensorflow | 
|  | #   GIT_TAG ${TFLITE_TAG} | 
|  | #   GIT_SHALLOW TRUE) | 
|  | # fetchcontent_getproperties(tflite) | 
|  | # if(NOT tflite_POPULATED) | 
|  | #   fetchcontent_populate(tflite) | 
|  | #   add_subdirectory(${tflite_SOURCE_DIR}/tensorflow/lite/c | 
|  | #                    ${tflite_BINARY_DIR}) | 
|  | # endif() | 
|  | # cmake-format: on | 
|  | # | 
|  | # However some enviroments don't allow internet access during cmake build, | 
|  | # so the new approach is to store all the necessary TFLite dependencies as | 
|  | # archives inside of the third_party directory. These archives are extracted | 
|  | # below and built as sub-projects. The fetchcontent based snippet above can | 
|  | # be used in the future to update the stored archives for the dependencies | 
|  | # should TFlite version be updated, | 
|  | message(STATUS "Building TFLite from local sources...") | 
|  | # These are the paths of the stored TFLite dependencies, use the the | 
|  | # fetchcontent snippet above, then look for messages like: "Performing | 
|  | # download step (download, verify and extract) for 'xyz'" go to | 
|  | # "xyz-source", Then archive the source into "xyz.tar.gz" and and add the | 
|  | # variable "XYZ_SOURCE_DIR" pointing to "third_party/xyz" like below, also | 
|  | # update the command line to extrac the archive below. | 
|  |  | 
|  | string( | 
|  | CONCAT | 
|  | EXTRACT_TF_UPDATE_DEPS_CMAKE_CONFIG | 
|  | "cd ${CMAKE_CURRENT_SOURCE_DIR}/third_party;" | 
|  | "tar -xzf tensorflow.tar.gz; " | 
|  | "tar -xzf deps_cmake.tar.gz; " | 
|  | "cp deps_cmake/abseil-cpp.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/cpuinfo.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/eigen.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/farmhash.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/fft2d.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/flatbuffers.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/gemmlowp.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/ml_dtypes.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/neon2sse.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/protobuf.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/ruy.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules; " | 
|  | "cp deps_cmake/xnnpack.cmake ${CMAKE_CURRENT_SOURCE_DIR}/third_party/tensorflow/tensorflow/lite/tools/cmake/modules" | 
|  | ) | 
|  |  | 
|  | execute_process(COMMAND bash -c "${EXTRACT_TF_UPDATE_DEPS_CMAKE_CONFIG}") | 
|  | string( | 
|  | CONCAT EXTRACT_DEPS_TO_BUILD | 
|  | "cd ${CMAKE_CURRENT_SOURCE_DIR}/third_party; " | 
|  | "tar -xzf abseil-cpp.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf eigen.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf neon2sse.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf xnnpack.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf ruy.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf farmhash.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf fft2d.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf gemmlowp.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf ml_dtypes.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf cpuinfo.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf protobuf.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf flatbuffers.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf fp16.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf pthreadpool.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf psimd.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf FXdiv.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf benchmark.tar.gz -C ${CMAKE_BINARY_DIR}; " | 
|  | "tar -xzf googletest.tar.gz -C ${CMAKE_BINARY_DIR}") | 
|  |  | 
|  | execute_process(COMMAND bash -c "${EXTRACT_DEPS_TO_BUILD}") | 
|  |  | 
|  | set(FP16_SOURCE_DIR ${CMAKE_BINARY_DIR}/fp16) | 
|  | set(PTHREADPOOL_SOURCE_DIR ${CMAKE_BINARY_DIR}/pthreadpool) | 
|  | set(PSIMD_SOURCE_DIR ${CMAKE_BINARY_DIR}/psimd) | 
|  | set(FXDIV_SOURCE_DIR ${CMAKE_BINARY_DIR}/FXdiv) | 
|  | set(GOOGLEBENCHMARK_SOURCE_DIR ${CMAKE_BINARY_DIR}/benchmark) | 
|  | set(GOOGLETEST_SOURCE_DIR ${CMAKE_BINARY_DIR}/googletest) | 
|  | set(abseil-cpp_SOURCE_DIR ${CMAKE_BINARY_DIR}/abseil-cpp) | 
|  | set(CPUINFO_SOURCE_DIR ${CMAKE_BINARY_DIR}/cpuinfo) | 
|  | set(EIGEN_SOURCE_DIR ${CMAKE_BINARY_DIR}/eigen) | 
|  | set(FARMHASH_SOURCE_DIR ${CMAKE_BINARY_DIR}/farmhash) | 
|  | set(FFT2D_SOURCE_DIR ${CMAKE_BINARY_DIR}/fft2d) | 
|  | set(FLATBUFFERS_SOURCE_DIR ${CMAKE_BINARY_DIR}/flatbuffers) | 
|  | set(GEMMLOWP_SOURCE_DIR ${CMAKE_BINARY_DIR}/gemmlowp) | 
|  | set(ML_DTYPES_SOURCE_DIR ${CMAKE_BINARY_DIR}/ml_dtypes) | 
|  | set(PROTOBUF_SOURCE_DIR ${CMAKE_BINARY_DIR}/protobuf) | 
|  | set(RUY_SOURCE_DIR ${CMAKE_BINARY_DIR}/ruy) | 
|  | set(NEON2SSE_SOURCE_DIR ${CMAKE_BINARY_DIR}/neon2sse) | 
|  | set(XNNPACK_SOURCE_DIR ${CMAKE_BINARY_DIR}/XNNPACK) | 
|  |  | 
|  | # static linking makes life with TFLite much easier | 
|  | set(TFLITE_C_BUILD_SHARED_LIBS OFF) | 
|  |  | 
|  | # Keep RUY on. Ruy is a general GEMM library. | 
|  | set(TFLITE_ENABLE_RUY ON) | 
|  | # Turn XNNPack on. | 
|  | set(TFLITE_ENABLE_XNNPACK ON) | 
|  |  | 
|  | # Some of the subprojects (e.g. Eigen) are very noisy and emit status | 
|  | # messages all the time. Temporary ignore status messages while adding this | 
|  | # to silence it. Ugly but effective. | 
|  | set(OLD_CMAKE_MESSAGE_LOG_LEVEL ${CMAKE_MESSAGE_LOG_LEVEL}) | 
|  | set(CMAKE_MESSAGE_LOG_LEVEL WARNING) | 
|  | add_subdirectory(third_party/tensorflow/tensorflow/lite/c) | 
|  | set(CMAKE_MESSAGE_LOG_LEVEL ${OLD_CMAKE_MESSAGE_LOG_LEVEL}) | 
|  |  | 
|  | # Disable some noisy warnings in tflite | 
|  | target_compile_options(tensorflow-lite PRIVATE -w) | 
|  | include_directories(${AOM_ROOT}/third_party/tensorflow) | 
|  | include_directories("${CMAKE_CURRENT_BINARY_DIR}/flatbuffers/include/") | 
|  | add_dependencies(aom_av1_common tensorflow-lite) | 
|  |  | 
|  | # Figure out all the directories that were add_subdirectory-ed. | 
|  | set(ALL_DEP_DIRS ${AOM_ROOT}/third_party/tensorflow/tensorflow/lite/c) | 
|  | while(TRUE) | 
|  | list(LENGTH ALL_DEP_DIRS ALL_DEP_DIRS_LEN) | 
|  | set(DIR_LIST ${ALL_DEP_DIRS}) | 
|  | foreach(DIR ${DIR_LIST}) | 
|  | get_directory_property(SUBDIRS DIRECTORY ${DIR} SUBDIRECTORIES) | 
|  | list(APPEND ALL_DEP_DIRS ${SUBDIRS}) | 
|  | endforeach() | 
|  | list(REMOVE_DUPLICATES ALL_DEP_DIRS) | 
|  | list(LENGTH ALL_DEP_DIRS NEW_ALL_DEP_DIRS_LEN) | 
|  | # Break when no new folder is found. | 
|  | if(${ALL_DEP_DIRS_LEN} EQUAL ${NEW_ALL_DEP_DIRS_LEN}) | 
|  | break() | 
|  | endif() | 
|  | endwhile() | 
|  | # Suppress the warnings for each target defined in the dependecy | 
|  | # directories. | 
|  | foreach(DEP_DIR ${ALL_DEP_DIRS}) | 
|  | get_directory_property(DEP_TARGETS DIRECTORY ${DEP_DIR} | 
|  | BUILDSYSTEM_TARGETS) | 
|  | foreach(DEP_TARGET ${DEP_TARGETS}) | 
|  | get_target_property(DEP_TYPE ${DEP_TARGET} TYPE) | 
|  | if(${DEP_TYPE} STREQUAL "INTERFACE_LIBRARY") | 
|  | target_compile_options(${DEP_TARGET} INTERFACE -w) | 
|  | elseif(NOT (${DEP_TYPE} STREQUAL "UTILITY")) | 
|  | # There is a custom UTILITY type, so do not deal with it. | 
|  | target_compile_options(${DEP_TARGET} PUBLIC -w) | 
|  | endif() | 
|  | endforeach() | 
|  | endforeach() | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_USE_VMAF_RC AND NOT CONFIG_TUNE_VMAF) | 
|  | message(FATAL_ERROR "Turn on CONFIG_TUNE_VMAF to use CONFIG_USE_VMAF_RC.") | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_TUNE_VMAF) | 
|  | find_package(PkgConfig) | 
|  | if(CONFIG_USE_VMAF_RC) | 
|  | if(PKG_CONFIG_FOUND) | 
|  | pkg_check_modules(VMAF_RC REQUIRED libvmaf_rc) | 
|  | target_link_libraries(aom PRIVATE ${VMAF_RC_LDFLAGS} | 
|  | ${VMAF_RC_LIBRARIES}) | 
|  | target_include_directories(aom PRIVATE ${VMAF_RC_INCLUDE_DIRS}) | 
|  | if(VMAF_RC_CFLAGS) | 
|  | append_compiler_flag("${VMAF_RC_CFLAGS}") | 
|  | endif() | 
|  | else() | 
|  | message(FATAL_ERROR "CONFIG_USE_VMAF_RC error: pkg-config not found.") | 
|  | endif() | 
|  | else() | 
|  | if(PKG_CONFIG_FOUND) | 
|  | pkg_check_modules(VMAF REQUIRED libvmaf) | 
|  | else() | 
|  | find_library(VMAF_LIBRARIES vmaf) | 
|  | find_path(VMAF_INCLUDE_DIRS libvmaf.h PATH_SUFFIXES libvmaf) | 
|  | if(VMAF_LIBRARIES AND VMAF_INCLUDE_DIRS) | 
|  | message(STATUS "Found VMAF library: ${VMAF_LIBRARIES}") | 
|  | message(STATUS "Found VMAF include: ${VMAF_INCLUDE_DIRS}") | 
|  | else() | 
|  | message(FATAL_ERROR "VMAF library not found.") | 
|  | endif() | 
|  | endif() | 
|  | target_link_libraries(aom PRIVATE ${VMAF_LDFLAGS} ${VMAF_LIBRARIES}) | 
|  | target_include_directories(aom PRIVATE ${VMAF_INCLUDE_DIRS}) | 
|  | if(VMAF_CFLAGS) | 
|  | append_compiler_flag("${VMAF_CFLAGS}") | 
|  | endif() | 
|  | endif() | 
|  | set_target_properties(aom PROPERTIES LINKER_LANGUAGE CXX) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | set_target_properties(aom_static PROPERTIES LINKER_LANGUAGE CXX) | 
|  | endif() | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES) | 
|  |  | 
|  | # Maintain a separate variable listing only the examples to facilitate | 
|  | # installation of example programs into an examples sub directory of | 
|  | # $AOM_DIST_DIR/bin when building the dist target. | 
|  | list(APPEND AOM_EXAMPLE_TARGETS ${AOM_DECODER_EXAMPLE_TARGETS} | 
|  | ${AOM_ENCODER_EXAMPLE_TARGETS}) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_TOOLS) | 
|  | if(CONFIG_AV1_DECODER) | 
|  | add_executable( | 
|  | dump_obu | 
|  | "${AOM_GEN_SRC_DIR}/usage_exit.cc" | 
|  | "${AOM_ROOT}/tools/dump_obu.cc" | 
|  | "${AOM_ROOT}/tools/obu_parser.cc" | 
|  | "${AOM_ROOT}/tools/obu_parser.h" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  |  | 
|  | list(APPEND AOM_TOOL_TARGETS dump_obu) | 
|  | list(APPEND AOM_APP_TARGETS dump_obu) | 
|  |  | 
|  | # Maintain a separate variable listing only the examples to facilitate | 
|  | # installation of example programs into an tools sub directory of | 
|  | # $AOM_DIST_DIR/bin when building the dist target. | 
|  | list(APPEND AOM_TOOL_TARGETS ${AOM_DECODER_TOOL_TARGETS} | 
|  | ${AOM_ENCODER_TOOL_TARGETS}) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES | 
|  | AND CONFIG_AV1_DECODER | 
|  | AND CONFIG_AV1_ENCODER) | 
|  | add_executable( | 
|  | aom_cx_set_ref | 
|  | "${AOM_ROOT}/examples/aom_cx_set_ref.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | list(APPEND AOM_EXAMPLE_TARGETS aom_cx_set_ref) | 
|  | list(APPEND AOM_APP_TARGETS aom_cx_set_ref) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES AND CONFIG_AV1_ENCODER) | 
|  | add_executable( | 
|  | lightfield_encoder | 
|  | "${AOM_ROOT}/examples/lightfield_encoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util>) | 
|  | list(APPEND AOM_EXAMPLE_TARGETS lightfield_encoder) | 
|  | list(APPEND AOM_APP_TARGETS lightfield_encoder) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES AND CONFIG_AV1_DECODER) | 
|  | add_executable( | 
|  | lightfield_tile_list_decoder | 
|  | "${AOM_ROOT}/examples/lightfield_tile_list_decoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | list(APPEND AOM_EXAMPLE_TARGETS lightfield_tile_list_decoder) | 
|  | list(APPEND AOM_APP_TARGETS lightfield_tile_list_decoder) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES AND CONFIG_AV1_DECODER) | 
|  | add_executable( | 
|  | lightfield_decoder | 
|  | "${AOM_ROOT}/examples/lightfield_decoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | list(APPEND AOM_EXAMPLE_TARGETS lightfield_decoder) | 
|  | list(APPEND AOM_APP_TARGETS lightfield_decoder) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES | 
|  | AND CONFIG_AV1_ENCODER | 
|  | AND CONFIG_AV1_DECODER) | 
|  | add_executable( | 
|  | lightfield_bitstream_parsing | 
|  | "${AOM_ROOT}/examples/lightfield_bitstream_parsing.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | list(APPEND AOM_EXAMPLE_TARGETS lightfield_bitstream_parsing) | 
|  | list(APPEND AOM_APP_TARGETS lightfield_bitstream_parsing) | 
|  | endif() | 
|  |  | 
|  | if((ENABLE_EXAMPLES OR ENABLE_TESTS) | 
|  | AND CONFIG_AV1_ENCODER | 
|  | AND CONFIG_AV1_DECODER | 
|  | AND CONFIG_BRU) | 
|  | add_executable( | 
|  | bru_encoder_decoder | 
|  | "${AOM_ROOT}/examples/bru_encoder_decoder.c" | 
|  | $<TARGET_OBJECTS:aom_common_app_util> | 
|  | $<TARGET_OBJECTS:aom_encoder_app_util> | 
|  | $<TARGET_OBJECTS:aom_decoder_app_util>) | 
|  | list(APPEND AOM_EXAMPLE_TARGETS bru_encoder_decoder) | 
|  | list(APPEND AOM_APP_TARGETS bru_encoder_decoder) | 
|  | endif() | 
|  |  | 
|  | foreach(aom_app ${AOM_APP_TARGETS}) | 
|  | target_link_libraries(${aom_app} ${AOM_LIB_LINK_TYPE} aom) | 
|  | endforeach() | 
|  |  | 
|  | if(ENABLE_EXAMPLES | 
|  | OR ENABLE_TESTS | 
|  | OR ENABLE_TOOLS) | 
|  | if(CONFIG_LIBYUV) | 
|  | add_library(yuv OBJECT ${AOM_LIBYUV_SOURCES}) | 
|  | if(NOT MSVC) | 
|  | target_compile_options(yuv PRIVATE -Wno-unused-parameter) | 
|  | endif() | 
|  | include_directories("${AOM_ROOT}/third_party/libyuv/include") | 
|  |  | 
|  | # Add to existing targets. | 
|  | foreach(aom_app ${AOM_APP_TARGETS}) | 
|  | target_sources(${aom_app} PRIVATE $<TARGET_OBJECTS:yuv>) | 
|  | set_property(TARGET ${aom_app} PROPERTY LINKER_LANGUAGE CXX) | 
|  | endforeach() | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_WEBM_IO) | 
|  | add_library(webm OBJECT ${AOM_LIBWEBM_SOURCES}) | 
|  | include_directories("${AOM_ROOT}/third_party/libwebm") | 
|  | target_compile_definitions(webm PRIVATE __STDC_CONSTANT_MACROS) | 
|  | target_compile_definitions(webm PRIVATE __STDC_LIMIT_MACROS) | 
|  |  | 
|  | if(NOT MSVC) | 
|  | target_compile_options(webm PRIVATE -Wno-shadow) | 
|  | endif() | 
|  |  | 
|  | # Add to existing targets. | 
|  | if(CONFIG_AV1_DECODER) | 
|  | target_sources(aom_decoder_app_util PRIVATE ${AOM_WEBM_DECODER_SOURCES}) | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_AV1_ENCODER) | 
|  | target_sources(aom_encoder_app_util PRIVATE ${AOM_WEBM_ENCODER_SOURCES}) | 
|  | endif() | 
|  |  | 
|  | foreach(aom_app ${AOM_APP_TARGETS}) | 
|  | target_sources(${aom_app} PRIVATE $<TARGET_OBJECTS:webm>) | 
|  | set_property(TARGET ${aom_app} PROPERTY LINKER_LANGUAGE CXX) | 
|  | endforeach() | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_TESTS) | 
|  |  | 
|  | # Create test_libaom target and the targets it depends on. | 
|  | setup_aom_test_targets() | 
|  | endif() | 
|  |  | 
|  | if(HAVE_PTHREAD_H AND CONFIG_MULTITHREAD) | 
|  | find_package(Threads) | 
|  | target_link_libraries(aom ${AOM_LIB_LINK_TYPE} Threads::Threads) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | target_link_libraries(aom_static ${AOM_LIB_LINK_TYPE} Threads::Threads) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(XCODE) | 
|  |  | 
|  | # TODO(tomfinegan): Make sure target has no C++ files before doing this as | 
|  | # it's not necessary in that case. | 
|  | if(CONFIG_LIBYUV OR CONFIG_WEBM_IO) | 
|  |  | 
|  | # The Xcode generator does not obey LINKER_LANGUAGE. Because of the issue | 
|  | # what looks like a C++ file needs to be in any target that Xcode will link | 
|  | # when the target contains a C++ dependency. Without this Xcode will try to | 
|  | # link with the C linker, which always ends badly when a dependency actually | 
|  | # includes C++. | 
|  |  | 
|  | # Note: LINKER_LANGUAGE is explicitly set to C++ for all targets touched | 
|  | # here, it really is the Xcode generator's fault, or just a deficiency in | 
|  | # Xcode itself. | 
|  | foreach(aom_app ${AOM_APP_TARGETS}) | 
|  | add_dummy_source_file_to_target("${aom_app}" "cc") | 
|  | endforeach() | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(CONFIG_TENSORFLOW_LITE AND CONFIG_AV1_ENCODER) | 
|  | target_link_libraries(aom ${AOM_LIB_LINK_TYPE} tensorflow-lite) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | target_link_libraries(aom_static ${AOM_LIB_LINK_TYPE} tensorflow-lite) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES) | 
|  | add_executable(tf_lite_model "${AOM_ROOT}/examples/tf_lite_model.cc") | 
|  | list(APPEND AOM_EXAMPLE_TARGETS tf_lite_model) | 
|  | list(APPEND AOM_APP_TARGETS tf_lite_model) | 
|  | add_dependencies(tf_lite_model tensorflow-lite) | 
|  | target_link_libraries(tf_lite_model PRIVATE tensorflow-lite) | 
|  | add_executable(cnn_restore_y4m | 
|  | "${AOM_ROOT}/examples/cnn_restore/cnn_restore_y4m.cc") | 
|  | list(APPEND AOM_APP_TARGETS cnn_restore_y4m) | 
|  | add_dependencies(cnn_restore_y4m tensorflow-lite) | 
|  | target_link_libraries(cnn_restore_y4m PRIVATE tensorflow-lite) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES AND "${CMAKE_GENERATOR}" MATCHES "Makefiles$") | 
|  |  | 
|  | # For historical purposes place the example binaries in the example directory. | 
|  | file(MAKE_DIRECTORY "${AOM_CONFIG_DIR}/examples") | 
|  |  | 
|  | foreach(target ${AOM_EXAMPLE_TARGETS}) | 
|  | if(NOT "${target}" MATCHES "aomdec\|aomenc") | 
|  | set_target_properties(${target} PROPERTIES RUNTIME_OUTPUT_DIRECTORY | 
|  | "${AOM_CONFIG_DIR}/examples") | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | if(ENABLE_TOOLS AND AOM_TOOL_TARGETS) | 
|  |  | 
|  | # The same expectation is true for tool targets. | 
|  | file(MAKE_DIRECTORY "${AOM_CONFIG_DIR}/tools") | 
|  | set_target_properties( | 
|  | ${AOM_TOOL_TARGETS} PROPERTIES RUNTIME_OUTPUT_DIRECTORY | 
|  | "${AOM_CONFIG_DIR}/tools") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(BUILD_SHARED_LIBS) | 
|  | # Don't use -Wl,-z,defs with Clang's sanitizers. | 
|  | # | 
|  | # Clang's AddressSanitizer documentation says "When linking shared libraries, | 
|  | # the AddressSanitizer run-time is not linked, so -Wl,-z,defs may cause link | 
|  | # errors (don't use it with AddressSanitizer)." See | 
|  | # https://clang.llvm.org/docs/AddressSanitizer.html#usage. Similarly, see | 
|  | # https://clang.llvm.org/docs/MemorySanitizer.html#usage. | 
|  | if(NOT | 
|  | (APPLE | 
|  | OR CYGWIN | 
|  | OR WIN32) | 
|  | AND NOT (CMAKE_C_COMPILER_ID MATCHES "Clang" AND SANITIZE)) | 
|  | # The -z defs linker option reports unresolved symbol references from object | 
|  | # files when building a shared library. | 
|  | if("${CMAKE_VERSION}" VERSION_LESS "3.13") | 
|  | # target_link_options() is not available before CMake 3.13. | 
|  | target_link_libraries(aom PRIVATE -Wl,-z,defs) | 
|  | else() | 
|  | target_link_options(aom PRIVATE LINKER:-z,defs) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | include("${AOM_ROOT}/build/cmake/exports.cmake") | 
|  | setup_exports_target() | 
|  | endif() | 
|  |  | 
|  | # Handle user supplied compile and link flags last to ensure they're obeyed. | 
|  | set_user_flags() | 
|  |  | 
|  | # Aomedia documentation rule. | 
|  | set(DOXYGEN_VERSION_VALUE 0) | 
|  | if(ENABLE_DOCS) | 
|  | include(FindDoxygen) | 
|  | if(DOXYGEN_FOUND) | 
|  | # Check if Doxygen version is >= minimum required version(i.e. 1.8.10). | 
|  | set(MINIMUM_DOXYGEN_VERSION 1008010) | 
|  |  | 
|  | if(DOXYGEN_VERSION) | 
|  | # Strip SHA1 from version string if present. | 
|  | string(REGEX REPLACE "^([0-9]+\\.[0-9]+\\.[0-9]+).*" "\\1" | 
|  | DOXYGEN_VERSION ${DOXYGEN_VERSION}) | 
|  | # Replace dots with semicolons to create a list. | 
|  | string(REGEX REPLACE "\\." ";" DOXYGEN_VERSION_LIST ${DOXYGEN_VERSION}) | 
|  | # Parse version components from the list. | 
|  | list(GET DOXYGEN_VERSION_LIST 0 DOXYGEN_MAJOR) | 
|  | list(GET DOXYGEN_VERSION_LIST 1 DOXYGEN_MINOR) | 
|  | list(GET DOXYGEN_VERSION_LIST 2 DOXYGEN_PATCH) | 
|  | endif() | 
|  |  | 
|  | # Construct a version value for comparison. | 
|  | math(EXPR DOXYGEN_MAJOR "${DOXYGEN_MAJOR}*1000000") | 
|  | math(EXPR DOXYGEN_MINOR "${DOXYGEN_MINOR}*1000") | 
|  | math(EXPR DOXYGEN_VERSION_VALUE | 
|  | "${DOXYGEN_MAJOR} + ${DOXYGEN_MINOR} + ${DOXYGEN_PATCH}") | 
|  |  | 
|  | if(${DOXYGEN_VERSION_VALUE} LESS ${MINIMUM_DOXYGEN_VERSION}) | 
|  | set(DOXYGEN_FOUND NO) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(DOXYGEN_FOUND) | 
|  | include("${AOM_ROOT}/docs.cmake") | 
|  | setup_documentation_targets() | 
|  | else() | 
|  | message( | 
|  | "--- Cannot find doxygen(version 1.8.10 or newer), ENABLE_DOCS turned off." | 
|  | ) | 
|  | set(ENABLE_DOCS OFF) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | # Aomedia dist rule. | 
|  | if(CONFIG_AV1_DECODER AND ENABLE_EXAMPLES) | 
|  | list(APPEND AOM_DIST_APPS $<TARGET_FILE:aomdec>) | 
|  | endif() | 
|  | if(CONFIG_AV1_ENCODER AND ENABLE_EXAMPLES) | 
|  | list(APPEND AOM_DIST_APPS $<TARGET_FILE:aomenc>) | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_EXAMPLES) | 
|  | foreach(example ${AOM_EXAMPLE_TARGETS}) | 
|  | list(APPEND AOM_DIST_EXAMPLES $<TARGET_FILE:${example}>) | 
|  | set_property(TARGET ${example} PROPERTY FOLDER examples) | 
|  | endforeach() | 
|  | endif() | 
|  |  | 
|  | if(ENABLE_TOOLS) | 
|  | foreach(tool ${AOM_TOOL_TARGETS}) | 
|  | list(APPEND AOM_DIST_TOOLS $<TARGET_FILE:${tool}>) | 
|  | set_property(TARGET ${tool} PROPERTY FOLDER tools) | 
|  | endforeach() | 
|  | endif() | 
|  |  | 
|  | if(NOT AOM_DIST_DIR) | 
|  | set(AOM_DIST_DIR "${AOM_CONFIG_DIR}/dist") | 
|  | endif() | 
|  |  | 
|  | add_custom_target( | 
|  | dist | 
|  | COMMAND | 
|  | ${CMAKE_COMMAND} -DAOM_ROOT=${AOM_ROOT} -DAOM_CONFIG_DIR=${AOM_CONFIG_DIR} | 
|  | -DAOM_DIST_DIR=${AOM_DIST_DIR} -DAOM_DIST_APPS="${AOM_DIST_APPS}" | 
|  | -DAOM_DIST_EXAMPLES="${AOM_DIST_EXAMPLES}" | 
|  | -DAOM_DIST_TOOLS="${AOM_DIST_TOOLS}" | 
|  | -DAOM_DIST_INCLUDES="${AOM_INSTALL_INCS}" -DAOM_DIST_LIBS=$<TARGET_FILE:aom> | 
|  | -DENABLE_DOCS=${ENABLE_DOCS} -P "${AOM_ROOT}/build/cmake/dist.cmake" | 
|  | DEPENDS ${AOM_INSTALL_BINS} ${AOM_INSTALL_LIBS} ${AOM_INSTALL_INCS} | 
|  | ${AOM_EXAMPLE_TARGETS} ${AOM_TOOL_TARGETS}) | 
|  |  | 
|  | if(ENABLE_DOCS) | 
|  | add_dependencies(dist docs) | 
|  | endif() | 
|  |  | 
|  | # Collect all variables containing libaom source files. | 
|  | get_cmake_property(all_cmake_vars VARIABLES) | 
|  | foreach(var ${all_cmake_vars}) | 
|  | if("${var}" MATCHES "SOURCES$\|_INTRIN_\|_ASM_" | 
|  | AND NOT "${var}" MATCHES "_APP_\|DOXYGEN\|LIBWEBM\|LIBYUV\|_PKG_\|TEST") | 
|  | list(APPEND aom_source_vars ${var}) | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | if(NOT CONFIG_AV1_DECODER) | 
|  | list(FILTER aom_source_vars EXCLUDE REGEX "_DECODER_") | 
|  | endif() | 
|  |  | 
|  | # Libaom_srcs.txt generation. | 
|  | set(libaom_srcs_txt_file "${AOM_CONFIG_DIR}/libaom_srcs.txt") | 
|  | file(WRITE "${libaom_srcs_txt_file}" "# This file is generated. DO NOT EDIT.\n") | 
|  |  | 
|  | # Static source file list first. | 
|  | foreach(aom_source_var ${aom_source_vars}) | 
|  | foreach(file ${${aom_source_var}}) | 
|  | if(NOT "${file}" MATCHES "${AOM_CONFIG_DIR}") | 
|  | string(REPLACE "${AOM_ROOT}/" "" file "${file}") | 
|  | if(NOT CONFIG_AV1_DECODER AND "${file}" MATCHES "aom_decoder") | 
|  | continue() | 
|  | endif() | 
|  | file(APPEND "${libaom_srcs_txt_file}" "${file}\n") | 
|  | endif() | 
|  | endforeach() | 
|  | endforeach() | 
|  |  | 
|  | file(APPEND "${libaom_srcs_txt_file}" | 
|  | "# Files below this line are generated by the libaom build system.\n") | 
|  | foreach(aom_source_var ${aom_source_vars}) | 
|  | foreach(file ${${aom_source_var}}) | 
|  | if("${file}" MATCHES "${AOM_CONFIG_DIR}") | 
|  | string(REPLACE "${AOM_CONFIG_DIR}/" "" file "${file}") | 
|  | file(APPEND "${libaom_srcs_txt_file}" "${file}\n") | 
|  | endif() | 
|  | endforeach() | 
|  | endforeach() | 
|  |  | 
|  | # Libaom_srcs.gni generation. | 
|  | set(libaom_srcs_gni_file "${AOM_CONFIG_DIR}/libaom_srcs.gni") | 
|  | file(WRITE "${libaom_srcs_gni_file}" "# This file is generated. DO NOT EDIT.\n") | 
|  |  | 
|  | foreach(aom_source_var ${aom_source_vars}) | 
|  | if("${${aom_source_var}}" MATCHES "${AOM_ROOT}") | 
|  | string(TOLOWER ${aom_source_var} aom_source_var_lowercase) | 
|  | file(APPEND "${libaom_srcs_gni_file}" "\n${aom_source_var_lowercase} = [\n") | 
|  | endif() | 
|  |  | 
|  | foreach(file ${${aom_source_var}}) | 
|  | if(NOT "${file}" MATCHES "${AOM_CONFIG_DIR}") | 
|  | string(REPLACE "${AOM_ROOT}" "//third_party/libaom/source/libaom" file | 
|  | "${file}") | 
|  | if(NOT CONFIG_AV1_DECODER AND "${file}" MATCHES "aom_decoder") | 
|  | continue() | 
|  | endif() | 
|  | file(APPEND "${libaom_srcs_gni_file}" "  \"${file}\",\n") | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | if("${${aom_source_var}}" MATCHES "${AOM_ROOT}") | 
|  | file(APPEND "${libaom_srcs_gni_file}" "]\n") | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | file(APPEND "${libaom_srcs_gni_file}" | 
|  | "\n# Files below this line are generated by the libaom build system.\n") | 
|  |  | 
|  | foreach(aom_source_var ${aom_source_vars}) | 
|  | if("${${aom_source_var}}" MATCHES "${AOM_CONFIG_DIR}") | 
|  | string(TOLOWER ${aom_source_var} aom_source_var_lowercase) | 
|  | file(APPEND "${libaom_srcs_gni_file}" | 
|  | "\n${aom_source_var_lowercase}_gen = [\n") | 
|  | endif() | 
|  | foreach(file ${${aom_source_var}}) | 
|  | if(NOT "${file}" MATCHES "${AOM_ROOT}") | 
|  | string(REPLACE "${AOM_CONFIG_DIR}" "//third_party/libaom/source/libaom" | 
|  | file "${file}") | 
|  | file(APPEND "${libaom_srcs_gni_file}" "  \"${file}\",\n") | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | if("${${aom_source_var}}" MATCHES "${AOM_CONFIG_DIR}") | 
|  | file(APPEND "${libaom_srcs_gni_file}" "]\n") | 
|  | endif() | 
|  | endforeach() | 
|  |  | 
|  | # Generate aom.pc and setup install rule. | 
|  | setup_aom_install_targets() |