/* | |

* Copyright (c) 2021, Alliance for Open Media. All rights reserved | |

* | |

* This source code is subject to the terms of the BSD 3-Clause Clear License | |

* and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear | |

* License was not distributed with this source code in the LICENSE file, you | |

* can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the | |

* Alliance for Open Media Patent License 1.0 was not distributed with this | |

* source code in the PATENTS file, you can obtain it at | |

* aomedia.org/license/patent-license/. | |

*/ | |

#ifndef AOM_AV1_ENCODER_ENCODETXB_H_ | |

#define AOM_AV1_ENCODER_ENCODETXB_H_ | |

#include "config/aom_config.h" | |

#include "av1/common/av1_common_int.h" | |

#include "av1/common/blockd.h" | |

#include "av1/common/txb_common.h" | |

#include "av1/encoder/block.h" | |

#include "av1/encoder/encoder.h" | |

#include "aom_dsp/bitwriter.h" | |

#ifdef __cplusplus | |

extern "C" { | |

#endif | |

/*!\cond */ | |

#define TXB_SKIP_CTX_MASK 31 | |

#define DC_SIGN_CTX_SHIFT 5 | |

#define DC_SIGN_CTX_MASK 3 | |

typedef struct TxbInfo { | |

tran_low_t *qcoeff; | |

uint8_t *levels; // absolute values and clamped to 255. | |

tran_low_t *dqcoeff; | |

const tran_low_t *tcoeff; | |

const int32_t *dequant; | |

int shift; | |

TX_SIZE tx_size; | |

TX_SIZE txs_ctx; | |

TX_TYPE tx_type; | |

int bwl; | |

int width; | |

int height; | |

int eob; | |

int seg_eob; | |

const SCAN_ORDER *scan_order; | |

TXB_CTX *txb_ctx; | |

int64_t rdmult; | |

const qm_val_t *iqmatrix; | |

int tx_type_cost; | |

} TxbInfo; | |

/*!\endcond */ | |

/*!\brief Allocate the memory resources for all the macro blocks in the current | |

* coding frame. | |

* \ingroup coefficient_coding | |

* | |

* Each macro block will need a \ref CB_COEFF_BUFFER to store information for | |

* rate-distortion optimization and entropy coding of transform coefficients. | |

* | |

* \param[in] cpi Top-level encoder structure | |

*/ | |

void av1_alloc_txb_buf(AV1_COMP *cpi); | |

/*!\brief Free the memory resources for all the macro blocks in the current | |

* coding frame. | |

* \ingroup coefficient_coding | |

* | |

* See \ref av1_alloc_txb_buf and \ref CB_COEFF_BUFFER for more details. | |

* | |

* \param[in] cpi Top-level encoder structure | |

*/ | |

void av1_free_txb_buf(AV1_COMP *cpi); | |

#if CONFIG_CROSS_CHROMA_TX | |

/*!\brief Compute the entropy cost of coding coefficients in a transform block. | |

* | |

* \ingroup coefficient_coding | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for | |

the current encoding macroblock. | |

* \param[in] plane The index of the current plane. | |

* \param[in] block The index of the current transform block | |

in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block. | |

* \param[in] tx_size The transform size. | |

* \param[in] tx_type The transform type. | |

* \param[in] cctx_type The cross chroma component transform | |

* type. | |

* \param[in] txb_ctx Context info for entropy coding transform | |

block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[in] reduced_tx_set_used Whether the transform type is chosen from | |

* a reduced set. | |

*/ | |

#else | |

/*!\brief Compute the entropy cost of coding coefficients in a transform block. | |

* | |

* \ingroup coefficient_coding | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for | |

the current encoding macroblock. | |

* \param[in] plane The index of the current plane. | |

* \param[in] block The index of the current transform block | |

in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block. | |

* \param[in] tx_size The transform size. | |

* \param[in] tx_type The transform type. | |

* \param[in] txb_ctx Context info for entropy coding transform | |

block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[in] reduced_tx_set_used Whether the transform type is chosen from | |

* a reduced set. | |

*/ | |

#endif // CONFIG_CROSS_CHROMA_TX | |

int av1_cost_coeffs_txb(const AV1_COMMON *cm, const MACROBLOCK *x, | |

const int plane, const int block, const TX_SIZE tx_size, | |

const TX_TYPE tx_type, | |

#if CONFIG_CROSS_CHROMA_TX | |

const CctxType cctx_type, | |

#endif // CONFIG_CROSS_CHROMA_TX | |

const TXB_CTX *const txb_ctx, int reduced_tx_set_used); | |

#if CONFIG_CROSS_CHROMA_TX | |

/*!\brief Estimate the entropy cost of coding a transform block using Laplacian | |

* distribution. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function compute the entropy costs of the end of block position (eob) | |

* and the transform type (tx_type) precisely. | |

* | |

* Then using \ref av1_cost_coeffs_txb_estimate to estimate the entropy costs | |

* of coefficients in the transform block. | |

* | |

* In the end, the function returns the sum of entropy costs of end of block | |

* position (eob), transform type (tx_type) and coefficients. | |

* | |

* Compared to \ref av1_cost_coeffs_txb, this function is much faster but less | |

* accurate. | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for the | |

* current encoding macroblock | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The transform size | |

* \param[in] tx_type The transform type | |

* \param[in] cctx_type The cross chroma component transform type | |

* \param[in] txb_ctx Context info for entropy coding transform block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[in] reduced_tx_set_used Whether the transform type is chosen from | |

* a reduced set. | |

* \param[in] adjust_eob Whether to adjust the end of block position | |

(eob) | |

* or not. | |

* \return int Estimated entropy cost of coding the transform | |

block. | |

*/ | |

#else | |

/*!\brief Estimate the entropy cost of coding a transform block using Laplacian | |

* distribution. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function compute the entropy costs of the end of block position (eob) | |

* and the transform type (tx_type) precisely. | |

* | |

* Then using \ref av1_cost_coeffs_txb_estimate to estimate the entropy costs | |

* of coefficients in the transform block. | |

* | |

* In the end, the function returns the sum of entropy costs of end of block | |

* position (eob), transform type (tx_type) and coefficients. | |

* | |

* Compared to \ref av1_cost_coeffs_txb, this function is much faster but less | |

* accurate. | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for the | |

* current encoding macroblock | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The transform size | |

* \param[in] tx_type The transform type | |

* \param[in] txb_ctx Context info for entropy coding transform block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[in] reduced_tx_set_used Whether the transform type is chosen from | |

* a reduced set. | |

* \param[in] adjust_eob Whether to adjust the end of block position | |

(eob) | |

* or not. | |

* \return int Estimated entropy cost of coding the transform | |

block. | |

*/ | |

#endif // CONFIG_CROSS_CHROMA_TX | |

int av1_cost_coeffs_txb_laplacian(const AV1_COMMON *cm, const MACROBLOCK *x, | |

const int plane, const int block, | |

const TX_SIZE tx_size, const TX_TYPE tx_type, | |

#if CONFIG_CROSS_CHROMA_TX | |

const CctxType cctx_type, | |

#endif // CONFIG_CROSS_CHROMA_TX | |

const TXB_CTX *const txb_ctx, | |

const int reduced_tx_set_used, | |

const int adjust_eob); | |

/*!\brief Estimate the entropy cost of transform coefficients using Laplacian | |

* distribution. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function assumes each transform coefficient is of its own Laplacian | |

* distribution and the coefficient is the only observation of the Laplacian | |

* distribution. | |

* | |

* Based on that, each coefficient's coding cost can be estimated by computing | |

* the entropy of the corresponding Laplacian distribution. | |

* | |

* This function then return the sum of the estimated entropy cost for all | |

* coefficients in the transform block. | |

* | |

* Note that the entropy cost of end of block (eob) and transform type (tx_type) | |

* are not included. | |

* | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The transform size | |

* \param[in] tx_type The transform type | |

* \return int Estimated entropy cost of coefficients in the | |

* transform block. | |

*/ | |

int av1_cost_coeffs_txb_estimate(const MACROBLOCK *x, const int plane, | |

const int block, const TX_SIZE tx_size, | |

const TX_TYPE tx_type); | |

/*!\brief Write quantized coefficients in a transform block into bitstream using | |

* entropy coding. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function will write the quantized coefficients in a transform block into | |

* the bitstream using entropy coding. | |

* | |

* The coding steps are as follows. | |

* | |

* 1) Code the end of block position "eob", which is the scan index of the | |

* last non-zero coefficient plus one. | |

* | |

* 2) Code the lower magnitude level (<= COEFF_BASE_RANGE + NUM_BASE_LEVELS) | |

* for each coefficient in reversed scan order. | |

* | |

* 3) Code the sign and higher magnitude level | |

* (> COEFF_BASE_RANGE + NUM_BASE_LEVELS) in forward scan order. | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] w Entropy coding write pointer | |

* \param[in] blk_row The row index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane | |

* \param[in] blk_col The col index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The given transform size | |

*/ | |

void av1_write_coeffs_txb(const AV1_COMMON *const cm, MACROBLOCK *const x, | |

aom_writer *w, int blk_row, int blk_col, int plane, | |

int block, TX_SIZE tx_size); | |

/*!\brief Write the transform unit skip flag and the transform type for Luma | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function will write the transform unit skip flag (eob==0) first and | |

* then the transform type for the Luma component. | |

* | |

* The coding steps are as follows. | |

* | |

* 1) Code the transform unit skip flag (eob==0) | |

* | |

* 2) Code the transform type | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] w Entropy coding write pointer | |

* \param[in] blk_row The row index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane | |

* \param[in] blk_col The col index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The given transform size | |

*/ | |

int av1_write_sig_txtype(const AV1_COMMON *const cm, MACROBLOCK *const x, | |

aom_writer *w, int blk_row, int blk_col, int plane, | |

int block, TX_SIZE tx_size); | |

/*!\brief Estimate the entropy cost of 2D IDTX transform coefficients | |

* using Laplacian distribution for forward skip residual coding. Unlike | |

* av1_cost_coeffs_txb_estimate this function does not consider EOB. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function assumes each transform coefficient is of its own Laplacian | |

* distribution and the coefficient is the only observation of the Laplacian | |

* distribution. | |

* | |

* Based on that, each coefficient's coding cost can be estimated by computing | |

* the entropy of the corresponding Laplacian distribution. | |

* | |

* This function then return the sum of the estimated entropy cost for all | |

* coefficients in the transform block. | |

* | |

* Note that the entropy cost of end of block (eob) and transform type (tx_type) | |

* are not included. | |

* | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The transform size | |

* \param[in] tx_type The transform type | |

* \return int Estimated entropy cost of coefficients in the | |

* transform block. | |

*/ | |

int av1_cost_coeffs_txb_skip_estimate(const MACROBLOCK *x, const int plane, | |

const int block, const TX_SIZE tx_size, | |

const TX_TYPE tx_type); | |

/*!\brief Write quantized coefficients in a identity transform block into | |

* bitstream using forward skip coding. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function will write the quantized coefficients in a transform block | |

after 2D | |

* identity transform into the bitstream using forward skip entropy coding. | |

* | |

* The coding steps are as follows. | |

* | |

* 1) Code the lower magnitude level (<= COEFF_BASE_RANGE + NUM_BASE_LEVELS) | |

* for each coefficient in reversed scan order. | |

* | |

* 2) Code the sign and higher magnitude level | |

* (> COEFF_BASE_RANGE + NUM_BASE_LEVELS) in forward scan order. | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] w Entropy coding write pointer | |

* \param[in] blk_row The row index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane | |

* \param[in] blk_col The col index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block | |

* \param[in] tx_size The given transform size | |

*/ | |

void av1_write_coeffs_txb_skip(const AV1_COMMON *const cm, MACROBLOCK *const x, | |

aom_writer *w, int blk_row, int blk_col, | |

int plane, int block, TX_SIZE tx_size); | |

/*!\brief Write quantized coefficients of all transform blocks in an intra | |

* macroblock into the bitstream using entropy coding. | |

* | |

* \ingroup coefficient_coding | |

* | |

* All transform blocks in the intra macroblock share the same transform size. | |

* | |

* This function use \ref av1_write_coeffs_txb() to code each transform block in | |

* raster order. | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

* decoder | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] w Entropy coding write pointer | |

* \param[in] bsize Block size of the current macroblock | |

*/ | |

void av1_write_intra_coeffs_mb(const AV1_COMMON *const cm, MACROBLOCK *x, | |

aom_writer *w, BLOCK_SIZE bsize); | |

/*!\brief Pack the context info of the current transform block into an uint8_t. | |

* \ingroup coefficient_coding | |

* | |

* This context info will be collected and consolidated by its neighbor | |

* transform blocks for coding transform block skip flag (tx_skip) and | |

* the sign of DC coefficient (dc_sign). | |

* | |

* \param[in] qcoeff Buffer of quantized coefficients | |

* \param[in] scan_order Coding order of coefficients in the transform | |

* block | |

* \param[in] eob The scan index of last non-zero coefficient plus | |

* one | |

*/ | |

uint8_t av1_get_txb_entropy_context(const tran_low_t *qcoeff, | |

const SCAN_ORDER *scan_order, int eob); | |

/*!\brief Update the probability model (cdf) and the entropy context related to | |

* coefficient coding for all transform blocks in the intra macroblock. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function will go through each transform block in the intra macorblock | |

* and call \ref av1_update_and_record_txb_context to update the probability | |

* model and entropy context properly. | |

* | |

* \param[in] cpi Top-level encoder structure | |

* \param[in] td Top-level multithreading structure | |

* \param[in] dry_run Whether this is a dry run. | |

* \param[in] bsize Block size of the current macroblock | |

* \param[in] allow_update_cdf Allowed to update probability model (cdf) or | |

* not. | |

*/ | |

void av1_update_intra_mb_txb_context(const AV1_COMP *cpi, ThreadData *td, | |

RUN_TYPE dry_run, BLOCK_SIZE bsize, | |

uint8_t allow_update_cdf); | |

/*!\brief Update the probability model (cdf) and the entropy context related to | |

* coefficient coding for a transform block. | |

* | |

* \ingroup coefficient_coding | |

* | |

* There are regular mode and dry run for this funtion. | |

* | |

* Regular mode: | |

* | |

* The probability model (cdf) for each coding symbol in the | |

* transform block will be updated. | |

* | |

* The entropy context of this transform block will be updated. | |

* | |

* Dry run: | |

* | |

* The probability model update will be skipped. | |

* | |

* The entropy context of this transform block will be updated. | |

* | |

* \param[in] plane The index of the current plane. | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block. | |

* \param[in] blk_row The row index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane. | |

* \param[in] blk_col The col index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane. | |

* \param[in] plane_bsize Block size for this plane. When the video source | |

* uses chroma subsampling, the block size of UV planes will be smaller than the | |

* block size of Y plane. | |

* \param[in] tx_size The given transform size. | |

* \param[in] arg This parameter will be translated into | |

* tokenize_b_args, in which RUN_TYPE indicates using regular mode or dry run. | |

*/ | |

void av1_update_and_record_txb_context(int plane, int block, int blk_row, | |

int blk_col, BLOCK_SIZE plane_bsize, | |

TX_SIZE tx_size, void *arg); | |

/*!\brief Update the probability model (cdf) and the entropy context related to | |

* coefficient coding for a transform block when the transform type is 2D | |

* identity (IDTX) and the forward skip residual coding mode is used.. | |

* | |

* \ingroup coefficient_coding | |

* | |

* There are regular mode and dry run for this funtion. | |

* | |

* Regular mode: | |

* | |

* The probability model (cdf) for each coding symbol in the | |

* transform block will be updated. | |

* | |

* The entropy context of this transform block will be updated. | |

* | |

* Dry run: | |

* | |

* The probability model update will be skipped. | |

* | |

* The entropy context of this transform block will be updated. | |

* | |

* \param[in] plane The index of the current plane. | |

* \param[in] block The index of the current transform block in the | |

* macroblock. It's defined by number of 4x4 units that have been coded before | |

* the currernt transform block. | |

* \param[in] blk_row The row index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane. | |

* \param[in] blk_col The col index of the current transform block | |

* in the macroblock. Each unit has 4 pixels in y plane. | |

* \param[in] plane_bsize Block size for this plane. When the video source | |

* uses chroma subsampling, the block size of UV planes will be smaller than the | |

* block size of Y plane. | |

* \param[in] tx_size The given transform size. | |

* \param[in] arg This parameter will be translated into | |

* tokenize_b_args, in which RUN_TYPE indicates using regular mode or dry run. | |

*/ | |

void av1_update_and_record_txb_skip_context(int plane, int block, int blk_row, | |

int blk_col, BLOCK_SIZE plane_bsize, | |

TX_SIZE tx_size, void *arg); | |

#if CONFIG_CROSS_CHROMA_TX | |

/*!\brief Adjust the magnitude of quantized coefficients to achieve better | |

* rate-distortion (RD) trade-off. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function goes through each coefficient and greedily choose to lower | |

* the coefficient magnitude by 1 or not based on the RD score. | |

* | |

* The coefficients are processing in reversed scan order. | |

* | |

* Note that, the end of block position (eob) may change if the original last | |

* coefficient is lowered to zero. | |

* | |

* \param[in] cpi Top-level encoder structure | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* \param[in] tx_size The transform size | |

* \param[in] tx_type The transform type | |

* \param[in] cctx_type The cross chroma component transform type | |

* \param[in] txb_ctx Context info for entropy coding transform block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[out] rate_cost The entropy cost of coding the transform block | |

* after adjustment of coefficients. | |

* \param[in] sharpness When sharpness == 1, the function will be less | |

* aggressive toward lowering the magnitude of coefficients. | |

* In this way, the transform block will contain more high-frequency | |

coefficients | |

* and therefore preserve the sharpness of the reconstructed block. | |

*/ | |

#else | |

/*!\brief Adjust the magnitude of quantized coefficients to achieve better | |

* rate-distortion (RD) trade-off. | |

* | |

* \ingroup coefficient_coding | |

* | |

* This function goes through each coefficient and greedily choose to lower | |

* the coefficient magnitude by 1 or not based on the RD score. | |

* | |

* The coefficients are processing in reversed scan order. | |

* | |

* Note that, the end of block position (eob) may change if the original last | |

* coefficient is lowered to zero. | |

* | |

* \param[in] cpi Top-level encoder structure | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] plane The index of the current plane | |

* \param[in] block The index of the current transform block in the | |

* \param[in] tx_size The transform size | |

* \param[in] tx_type The transform type | |

* \param[in] txb_ctx Context info for entropy coding transform block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[out] rate_cost The entropy cost of coding the transform block | |

* after adjustment of coefficients. | |

* \param[in] sharpness When sharpness == 1, the function will be less | |

* aggressive toward lowering the magnitude of coefficients. | |

* In this way, the transform block will contain more high-frequency | |

coefficients | |

* and therefore preserve the sharpness of the reconstructed block. | |

*/ | |

#endif // CONFIG_CROSS_CHROMA_TX | |

int av1_optimize_txb_new(const struct AV1_COMP *cpi, MACROBLOCK *x, int plane, | |

int block, TX_SIZE tx_size, TX_TYPE tx_type, | |

#if CONFIG_CROSS_CHROMA_TX | |

CctxType cctx_type, | |

#endif // CONFIG_CROSS_CHROMA_TX | |

const TXB_CTX *const txb_ctx, int *rate_cost, | |

int sharpness); | |

/*!\brief Get the corresponding \ref CB_COEFF_BUFFER of the current macro block. | |

* | |

* \ingroup coefficient_coding | |

* | |

* The macroblock's location is described by mi_row and mi_col, row and column | |

* mi indexes in the coding frame. | |

* | |

* Each mi unit is a 4x4 pixel block. | |

* | |

* \param[in] cpi Top-level encoder structure. | |

* \param[in] mi_row Row mi index of the current transform block | |

* in the frame. | |

* \param[in] mi_col Column mi index of the current transform | |

* block in the frame. | |

* \return CB_COEFF_BUFFER* Pointer of \ref CB_COEFF_BUFFER associated | |

* to this macroblock. | |

*/ | |

CB_COEFF_BUFFER *av1_get_cb_coeff_buffer(const struct AV1_COMP *cpi, int mi_row, | |

int mi_col); | |

#if CONFIG_CROSS_CHROMA_TX | |

/*!\brief Return the entropy cost associated with the cross chroma transform | |

* | |

* \ingroup coefficient_coding | |

* | |

* \param[in] cm Top-level structure shared by encoder and | |

decoder | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] xd Pointer to structure holding the data for the | |

current macroblockd | |

* \param[in] plane The index of the current plane | |

* \param[in] tx_size The transform size | |

* \param[in] block The index of the current transform block | |

* \param[in] cctx_type The cross chroma transform type | |

* | |

* \return int Entropy cost for cctx type | |

*/ | |

int get_cctx_type_cost(const AV1_COMMON *cm, const MACROBLOCK *x, | |

const MACROBLOCKD *xd, int plane, TX_SIZE tx_size, | |

int block, CctxType cctx_type); | |

#endif // CONFIG_CROSS_CHROMA_TX | |

#if CONFIG_CONTEXT_DERIVATION | |

/*!\brief Returns the entropy cost associated with skipping the current | |

* transform block. | |

* | |

* \ingroup coefficient_coding | |

* | |

* \param[in] coeff_costs Table of entropy cost for coefficient coding. | |

* \param[in] txb_ctx Context info for entropy coding transform block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[in] plane The index of the current plane | |

* \param[in] tx_size The transform size | |

* \param[in] x Pointer to structure holding the data for the | |

current encoding macroblock | |

* \param[in] block The index of the current transform block | |

*/ | |

#else | |

/*!\brief Returns the entropy cost associated with skipping the current | |

* transform block. | |

* | |

* \ingroup coefficient_coding | |

* | |

* \param[in] coeff_costs Table of entropy cost for coefficient coding. | |

* \param[in] txb_ctx Context info for entropy coding transform block | |

* skip flag (tx_skip) and the sign of DC coefficient (dc_sign). | |

* \param[in] plane The index of the current plane | |

* \param[in] tx_size The transform size | |

*/ | |

#endif // CONFIG_CONTEXT_DERIVATION | |

static INLINE int av1_cost_skip_txb(const CoeffCosts *coeff_costs, | |

const TXB_CTX *const txb_ctx, int plane, | |

TX_SIZE tx_size | |

#if CONFIG_CONTEXT_DERIVATION | |

, | |

MACROBLOCK *x, int block | |

#endif // CONFIG_CONTEXT_DERIVATION | |

) { | |

const TX_SIZE txs_ctx = get_txsize_entropy_ctx(tx_size); | |

const PLANE_TYPE plane_type = get_plane_type(plane); | |

const LV_MAP_COEFF_COST *const coeff_costs_ = | |

&coeff_costs->coeff_costs[txs_ctx][plane_type]; | |

#if CONFIG_CONTEXT_DERIVATION | |

int txb_skip_ctx = txb_ctx->txb_skip_ctx; | |

if (plane == AOM_PLANE_Y || plane == AOM_PLANE_U) { | |

return coeff_costs_->txb_skip_cost[txb_skip_ctx][1]; | |

} else { | |

txb_skip_ctx += | |

(x->plane[AOM_PLANE_U].eobs[block] ? V_TXB_SKIP_CONTEXT_OFFSET : 0); | |

return coeff_costs_->v_txb_skip_cost[txb_skip_ctx][1]; | |

} | |

#else | |

return coeff_costs_->txb_skip_cost[txb_ctx->txb_skip_ctx][1]; | |

#endif // CONFIG_CONTEXT_DERIVATION | |

} | |

/*!\cond */ | |

// These numbers are empirically obtained. | |

static const int plane_rd_mult[REF_TYPES][PLANE_TYPES] = { | |

{ 17, 13 }, | |

{ 16, 10 }, | |

}; | |

/*!\endcond */ | |

#ifdef __cplusplus | |

} | |

#endif | |

#endif // AOM_AV1_ENCODER_ENCODETXB_H_ |