blob: 6f41578a4938419705abada11e8d2f646120f779 [file] [log] [blame] [edit]
/*
* Copyright (c) 2021, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 3-Clause Clear License
* and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear
* License was not distributed with this source code in the LICENSE file, you
* can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the
* Alliance for Open Media Patent License 1.0 was not distributed with this
* source code in the PATENTS file, you can obtain it at
* aomedia.org/license/patent-license/.
*/
#ifndef AOM_AV1_ENCODER_SPEED_FEATURES_H_
#define AOM_AV1_ENCODER_SPEED_FEATURES_H_
#include "av1/common/enums.h"
#include "av1/encoder/enc_enums.h"
#include "av1/encoder/mcomp.h"
#include "av1/encoder/encodemb.h"
#ifdef __cplusplus
extern "C" {
#endif
/*! @file */
/*!\cond */
#define MAX_MESH_STEP 4
typedef struct MESH_PATTERN {
int range;
int interval;
} MESH_PATTERN;
enum {
INTRA_ALL = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED) | (1 << D45_PRED) |
(1 << D135_PRED) | (1 << D113_PRED) | (1 << D157_PRED) |
(1 << D203_PRED) | (1 << D67_PRED) | (1 << SMOOTH_PRED) |
(1 << SMOOTH_V_PRED) | (1 << SMOOTH_H_PRED) | (1 << PAETH_PRED),
UV_INTRA_ALL =
(1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) |
(1 << UV_D45_PRED) | (1 << UV_D135_PRED) | (1 << UV_D113_PRED) |
(1 << UV_D157_PRED) | (1 << UV_D203_PRED) | (1 << UV_D67_PRED) |
(1 << UV_SMOOTH_PRED) | (1 << UV_SMOOTH_V_PRED) |
(1 << UV_SMOOTH_H_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED),
UV_INTRA_DC = (1 << UV_DC_PRED),
UV_INTRA_DC_CFL = (1 << UV_DC_PRED) | (1 << UV_CFL_PRED),
UV_INTRA_DC_TM = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED),
UV_INTRA_DC_PAETH_CFL =
(1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED),
UV_INTRA_DC_H_V = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED),
UV_INTRA_DC_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_V_PRED) |
(1 << UV_H_PRED) | (1 << UV_CFL_PRED),
UV_INTRA_DC_PAETH_H_V = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) |
(1 << UV_V_PRED) | (1 << UV_H_PRED),
UV_INTRA_DC_PAETH_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) |
(1 << UV_V_PRED) | (1 << UV_H_PRED) |
(1 << UV_CFL_PRED),
INTRA_DC = (1 << DC_PRED),
INTRA_DC_TM = (1 << DC_PRED) | (1 << PAETH_PRED),
INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED),
INTRA_DC_PAETH_H_V =
(1 << DC_PRED) | (1 << PAETH_PRED) | (1 << V_PRED) | (1 << H_PRED)
};
enum {
INTER_ALL = (1 << NEARMV) | (1 << GLOBALMV) | (1 << NEWMV) |
(1 << NEAR_NEARMV) | (1 << NEW_NEWMV) | (1 << NEAR_NEWMV) |
(1 << NEW_NEARMV) | (1 << GLOBAL_GLOBALMV),
INTER_NEAR_GLOBAL = (1 << NEARMV) | (1 << GLOBALMV) | (1 << GLOBAL_GLOBALMV) |
(1 << NEW_NEARMV) | (1 << NEAR_NEWMV) |
(1 << NEAR_NEARMV),
};
enum {
TXFM_CODING_SF = 1,
INTER_PRED_SF = 2,
INTRA_PRED_SF = 4,
PARTITION_SF = 8,
LOOP_FILTER_SF = 16,
RD_SKIP_SF = 32,
RESERVE_2_SF = 64,
RESERVE_3_SF = 128,
} UENUM1BYTE(DEV_SPEED_FEATURES);
/* This enumeration defines when the rate control recode loop will be
* enabled.
*/
enum {
/*
* No recodes allowed
*/
DISALLOW_RECODE = 0,
/*
* Recode KF's exceeding maximum frame bandwidth
*/
ALLOW_RECODE_KFMAXBW = 1,
/*
* Allow recode only for KF/ARF/GF frames
*/
ALLOW_RECODE_KFARFGF = 2,
/*
* Allow recode for all frame types based on bitrate constraints.
*/
ALLOW_RECODE = 3,
} UENUM1BYTE(RECODE_LOOP_TYPE);
enum {
SUBPEL_TREE = 0,
SUBPEL_TREE_PRUNED = 1, // Prunes 1/2-pel searches
SUBPEL_TREE_PRUNED_MORE = 2, // Prunes 1/2-pel searches more aggressively
SUBPEL_TREE_PRUNED_EVENMORE = 3, // Prunes 1/2- and 1/4-pel searches
// Other methods to come
} UENUM1BYTE(SUBPEL_SEARCH_METHODS);
enum {
// Try the full image with different values.
LPF_PICK_FROM_FULL_IMAGE,
// Try the full image filter search with non-dual filter only.
LPF_PICK_FROM_FULL_IMAGE_NON_DUAL,
// Try a small portion of the image with different values.
LPF_PICK_FROM_SUBIMAGE,
// Estimate the level based on quantizer and frame type
LPF_PICK_FROM_Q,
// Pick 0 to disable LPF if LPF was enabled last frame
LPF_PICK_MINIMAL_LPF
} UENUM1BYTE(LPF_PICK_METHOD);
/*!\endcond */
/*!\enum CDEF_PICK_METHOD
* \brief This enumeration defines a variety of CDEF pick methods
*/
typedef enum {
CDEF_FULL_SEARCH, /**< Full search */
CDEF_FAST_SEARCH_LVL1, /**< Search among a subset of all possible filters. */
CDEF_FAST_SEARCH_LVL2, /**< Search reduced subset of filters than Level 1. */
CDEF_FAST_SEARCH_LVL3, /**< Search reduced subset of secondary filters than
Level 2. */
CDEF_PICK_FROM_Q, /**< Estimate filter strength based on quantizer. */
CDEF_PICK_METHODS
} CDEF_PICK_METHOD;
/*!\cond */
enum {
// Terminate search early based on distortion so far compared to
// qp step, distortion in the neighborhood of the frame, etc.
FLAG_EARLY_TERMINATE = 1 << 0,
// Skips comp inter modes if the best so far is an intra mode.
FLAG_SKIP_COMP_BESTINTRA = 1 << 1,
// Skips oblique intra modes if the best so far is an inter mode.
FLAG_SKIP_INTRA_BESTINTER = 1 << 3,
// Skips oblique intra modes at angles 27, 63, 117, 153 if the best
// intra so far is not one of the neighboring directions.
FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4,
// Skips intra modes other than DC_PRED if the source variance is small
FLAG_SKIP_INTRA_LOWVAR = 1 << 5,
} UENUM1BYTE(MODE_SEARCH_SKIP_LOGIC);
enum {
// No tx type pruning
TX_TYPE_PRUNE_0 = 0,
// adaptively prunes the least perspective tx types out of all 16
// (tuned to provide negligible quality loss)
TX_TYPE_PRUNE_1 = 1,
// similar, but applies much more aggressive pruning to get better speed-up
TX_TYPE_PRUNE_2 = 2,
TX_TYPE_PRUNE_3 = 3,
// More aggressive pruning based on tx type score and allowed tx count
TX_TYPE_PRUNE_4 = 4,
TX_TYPE_PRUNE_5 = 5,
} UENUM1BYTE(TX_TYPE_PRUNE_MODE);
enum {
// No reaction to rate control on a detected slide/scene change.
NO_DETECTION = 0,
// Set to larger Q based only on the detected slide/scene change and
// current/past Q.
FAST_DETECTION_MAXQ = 1,
} UENUM1BYTE(OVERSHOOT_DETECTION_CBR);
enum {
// Turns off multi-winner mode. So we will do txfm search on either all modes
// if winner mode is off, or we will only on txfm search on a single winner
// mode.
MULTI_WINNER_MODE_OFF = 0,
// Limits the number of winner modes to at most 2
MULTI_WINNER_MODE_FAST = 1,
// Uses the default number of winner modes, which is 3 for intra mode, and 1
// for inter mode.
MULTI_WINNER_MODE_DEFAULT = 2,
} UENUM1BYTE(MULTI_WINNER_MODE_TYPE);
typedef struct {
TX_TYPE_PRUNE_MODE prune_2d_txfm_mode;
int fast_intra_tx_type_search;
int fast_inter_tx_type_search;
// prune two least frequently chosen transforms for each intra mode
int use_reduced_intra_txset;
// Use a skip flag prediction model to detect blocks with skip = 1 early
// and avoid doing full TX type search for such blocks.
int use_skip_flag_prediction;
// Threshold used by the ML based method to predict TX block split decisions.
int ml_tx_split_thresh;
// skip remaining transform type search when we found the rdcost of skip is
// better than applying transform
int skip_tx_search;
// Prune tx type search using previous frame stats.
int prune_tx_type_using_stats;
// Prune tx type search using estimated RDcost
int prune_tx_type_est_rd;
// Flag used to control the winner mode processing for tx type pruning for
// inter blocks. It enables further tx type mode pruning based on ML model for
// mode evaluation and disables tx type mode pruning for winner mode
// processing.
int winner_mode_tx_type_pruning;
// Speed feature to disable intra secondary transform
int skip_stx_search;
#if CONFIG_CROSS_CHROMA_TX
// Speed feature to disable cross chroma component transform
int skip_cctx_search;
#endif // CONFIG_CROSS_CHROMA_TX
} TX_TYPE_SEARCH;
enum {
// Search partitions using RD criterion
SEARCH_PARTITION,
// Always use a fixed size partition
FIXED_PARTITION
} UENUM1BYTE(PARTITION_SEARCH_TYPE);
enum {
NOT_IN_USE,
DIRECT_PRED,
RELAXED_PRED,
ADAPT_PRED
} UENUM1BYTE(MAX_PART_PRED_MODE);
enum {
LAST_MV_DATA,
CURRENT_Q,
QTR_ONLY,
} UENUM1BYTE(MV_PREC_LOGIC);
enum {
SUPERRES_AUTO_ALL, // Tries all possible superres ratios
SUPERRES_AUTO_DUAL, // Tries no superres and q-based superres ratios
SUPERRES_AUTO_SOLO, // Only apply the q-based superres ratio
} UENUM1BYTE(SUPERRES_AUTO_SEARCH_TYPE);
/*!\endcond */
#if CONFIG_EXT_RECUR_PARTITIONS
/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to determine
* whether partition mode is reused. */
#define REUSE_PARTITION_MODE_FLAG (1 << 0)
/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to determine
* whether the intra prediction_mode is reused. */
#define REUSE_INTRA_MODE_IN_INTERFRAME_FLAG (1 << 1)
/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to determine
* whether the inter prediction_mode and ref frame are reused. */
#define REUSE_INTER_MODE_IN_INTERFRAME_FLAG (1 << 2)
/*! \brief Used with \ref MACROBLOCK::reuse_inter_mode_cache_type to signal
* reuse of inter and intra prediction_modes, as well as ref frame. */
#define REUSE_INTERFRAME_FLAG \
(REUSE_INTRA_MODE_IN_INTERFRAME_FLAG | REUSE_INTER_MODE_IN_INTERFRAME_FLAG)
#endif // CONFIG_EXT_RECUR_PARTITIONS
/*!
* \brief Sequence/frame level speed vs quality features
*/
typedef struct HIGH_LEVEL_SPEED_FEATURES {
/*!\cond */
// Frame level coding parameter update
int frame_parameter_update;
/*!\endcond */
/*!
* Cases and frame types for which the recode loop is enabled.
*/
RECODE_LOOP_TYPE recode_loop;
/*!
* Controls the tolerance vs target rate used in deciding whether to
* recode a frame. It has no meaning if recode is disabled.
*/
int recode_tolerance;
/*!\cond */
// Determine how motion vector precision is chosen. The possibilities are:
// LAST_MV_DATA: use the mv data from the last coded frame
// CURRENT_Q: use the current q as a threshold
// QTR_ONLY: use quarter pel precision only.
MV_PREC_LOGIC high_precision_mv_usage;
// Always set to 0. If on it enables 0 cost background transmission
// (except for the initial transmission of the segmentation). The feature is
// disabled because the addition of very large block sizes make the
// backgrounds very to cheap to encode, and the segmentation we have
// adds overhead.
int static_segmentation;
/*!
* Superres-auto mode search type:
*/
SUPERRES_AUTO_SEARCH_TYPE superres_auto_search_type;
/*!
* disallow references at different scale
*/
bool disable_unequal_scale_refs;
/*!\endcond */
} HIGH_LEVEL_SPEED_FEATURES;
/*!\cond */
typedef struct TPL_SPEED_FEATURES {
// Enable/disable GOP length adaptive decision.
int disable_gop_length_decision;
// Prune the intra modes search by tpl.
// If set to 0, we will search all intra modes from DC_PRED to PAETH_PRED.
// If set to 1, we only search DC_PRED, V_PRED, and H_PRED.
int prune_intra_modes;
// This parameter controls which step in the n-step process we start at.
int reduce_first_step_size;
// Skip motion estimation based on the precision of center MVs and the
// difference between center MVs.
// If set to 0, motion estimation is skipped for duplicate center MVs
// (default). If set to 1, motion estimation is skipped for duplicate
// full-pixel center MVs. If set to 2, motion estimation is skipped if the
// difference between center MVs is less than the threshold.
int skip_alike_starting_mv;
// When to stop subpel search.
SUBPEL_FORCE_STOP subpel_force_stop;
// Which search method to use.
SEARCH_METHODS search_method;
// Prune starting mvs in TPL based on sad scores.
int prune_starting_mv;
// Not run TPL for filtered Key frame.
int disable_filtered_key_tpl;
// Prune reference frames in TPL.
int prune_ref_frames_in_tpl;
} TPL_SPEED_FEATURES;
typedef struct GLOBAL_MOTION_SPEED_FEATURES {
int max_ref_frames;
// During global motion estimation, prune remaining reference frames in a
// given direction(past/future), if the evaluated ref_frame in that direction
// yields gm_type as INVALID/TRANSLATION/IDENTITY
int prune_ref_frame_for_gm_search;
// Number of refinement steps to apply after initial model generation
int num_refinement_steps;
// Disable global motion estimation based on stats of previous frames in the
// GF group
int disable_gm_search_based_on_stats;
} GLOBAL_MOTION_SPEED_FEATURES;
typedef struct PARTITION_SPEED_FEATURES {
PARTITION_SEARCH_TYPE partition_search_type;
// Used if partition_search_type = FIXED_PARTITION
BLOCK_SIZE fixed_partition_size;
// Prune extended partition types search
// Can take values 0 - 2, 0 referring to no pruning, and 1 - 2 increasing
// aggressiveness of pruning in order.
int prune_ext_partition_types_search_level;
// Use a ML model to prune horz and vert partitions
int ml_prune_rect_partition;
// Use a ML model to prune horz_a, horz_b, vert_a and vert_b partitions.
int ml_prune_ab_partition;
// Use a ML model to prune horz4 and vert4 partitions.
int ml_prune_4_partition;
// Use a ML model to adaptively terminate partition search after trying
// PARTITION_SPLIT. Can take values 0 - 2, 0 meaning not being enabled, and
// 1 - 2 increasing aggressiveness in order.
int ml_early_term_after_part_split_level;
// Skip rectangular partition test when partition type none gives better
// rd than partition type split. Can take values 0 - 2, 0 referring to no
// skipping, and 1 - 2 increasing aggressiveness of skipping in order.
int less_rectangular_check_level;
// Use square partition only beyond this block size.
BLOCK_SIZE use_square_partition_only_threshold;
// Sets min and max square partition levels for this superblock based on
// motion vector and prediction error distribution produced from 16x16
// simple motion search
MAX_PART_PRED_MODE auto_max_partition_based_on_simple_motion;
int auto_min_partition_based_on_simple_motion;
// Min and max square partition size we enable (block_size) as per auto
// min max, but also used by adjust partitioning, and pick_partitioning.
BLOCK_SIZE default_min_partition_size;
BLOCK_SIZE default_max_partition_size;
// Sets level of adjustment of variance-based partitioning during
// rd_use_partition 0 - no partition adjustment, 1 - try to merge partitions
// for small blocks and high QP, 2 - always try to merge leaf partitions, 3 -
// try to merge and split leaf partitions
int adjust_var_based_rd_partitioning;
// Partition search early breakout thresholds.
int64_t partition_search_breakout_dist_thr;
int partition_search_breakout_rate_thr;
// Thresholds for ML based partition search breakout.
int ml_partition_search_breakout_thresh[PARTITION_BLOCK_SIZES];
// Allow skipping partition search for still image frame
int allow_partition_search_skip;
// The aggressiveness of pruning with simple_motion_search.
// Currently 0 is the lowest, and 2 the highest.
int simple_motion_search_prune_agg;
// Perform simple_motion_search on each possible subblock and use it to prune
// PARTITION_HORZ and PARTITION_VERT.
int simple_motion_search_prune_rect;
// Perform simple motion search before none_partition to decide if we
// want to remove all partitions other than PARTITION_SPLIT. If set to 0, this
// model is disabled. If set to 1, the model attempts to perform
// PARTITION_SPLIT only. If set to 2, the model also attempts to prune
// PARTITION_SPLIT.
int simple_motion_search_split;
// Use features from simple_motion_search to terminate prediction block
// partition after PARTITION_NONE
int simple_motion_search_early_term_none;
// Controls whether to reduce the number of motion search steps. If this is 0,
// then simple_motion_search has the same number of steps as
// single_motion_search (assuming no other speed features). Otherwise, reduce
// the number of steps by the value contained in this variable.
int simple_motion_search_reduce_search_steps;
// This variable controls the maximum block size where intra blocks can be
// used in inter frames.
// TODO(aconverse): Fold this into one of the other many mode skips
BLOCK_SIZE max_intra_bsize;
// Use CNN with luma pixels on source frame on each of the 64x64 subblock to
// perform split/no_split decision on intra-frames.
int intra_cnn_split;
// Disable extended partition search for lower block sizes.
int ext_partition_eval_thresh;
// Prune 1:4 partition search based on winner info from split partitions
int prune_4_partition_using_split_info;
// Prune AB partition search using split and HORZ/VERT info
int prune_ab_partition_using_split_info;
// Terminate partition search for child partition,
// when NONE and SPLIT partition rd_costs are INT64_MAX.
int early_term_after_none_split;
#if CONFIG_EXT_RECUR_PARTITIONS
// Prunes PARTITION_3 if PARTITION_NONE is used instead of PARTITION_HORZ|VERT
int prune_rect_with_none_rd;
// Prunes PARTITION_3 if PARTITION_NONE is used instead of PARTITION_HORZ|VERT
int prune_part_3_with_part_none;
// Prunes PARTITION_3 partition 3 doesn't split in the same direction
int prune_part_3_with_part_rect;
int two_pass_partition_search;
// Prunes rect partition with ml model
int prune_rect_with_ml;
// End partition search if the grandparent, parent, and current block all
// failed PARTITION_NONE
int end_part_search_after_consec_failures;
// The recursion depth allowed for ext partitions
int ext_recur_depth;
#endif // CONFIG_EXT_RECUR_PARTITIONS
} PARTITION_SPEED_FEATURES;
typedef struct MV_SPEED_FEATURES {
// Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc).
SEARCH_METHODS search_method;
// Enable the use of faster, less accurate mv search method on bsize >=
// BLOCK_32X32.
// TODO(chiyotsai@google.com): Take the clip's resolution and mv activity into
// account.
int use_bsize_dependent_search_method;
// If this is set to 1, we limit the motion search range to 2 times the
// largest motion vector found in the last frame.
int auto_mv_step_size;
// Subpel_search_method can only be subpel_tree which does a subpixel
// logarithmic search that keeps stepping at 1/2 pixel units until
// you stop getting a gain, and then goes on to 1/4 and repeats
// the same process. Along the way it skips many diagonals.
SUBPEL_SEARCH_METHODS subpel_search_method;
// Maximum number of steps in logarithmic subpel search before giving up.
int subpel_iters_per_step;
// When to stop subpel search.
SUBPEL_FORCE_STOP subpel_force_stop;
// When to stop subpel search in simple motion search.
SUBPEL_FORCE_STOP simple_motion_subpel_force_stop;
#if CONFIG_FLEX_MVRES
// The type of interpolation filter used in motion search.
SUBPEL_SEARCH_TYPE subpel_search_type;
#else
// If true, sub-pixel search uses the exact convolve function used for final
// encoding and decoding; otherwise, it uses bilinear interpolation.
SUBPEL_SEARCH_TYPE use_accurate_subpel_search;
#endif
// Threshold for allowing exhaustive motion search.
int exhaustive_searches_thresh;
// Pattern to be used for any exhaustive mesh searches (except intraBC ME).
MESH_PATTERN mesh_patterns[MAX_MESH_STEP];
// Pattern to be used for exhaustive mesh searches of intraBC ME.
MESH_PATTERN intrabc_mesh_patterns[MAX_MESH_STEP];
// Reduce single motion search range based on MV result of prior ref_mv_idx.
int reduce_search_range;
// Prune mesh search.
int prune_mesh_search;
// Use the rd cost around the best FULLPEL_MV to speed up subpel search
int use_fullpel_costlist;
// Set the full pixel search level of obmc
// 0: obmc_full_pixel_diamond
// 1: obmc_refining_search_sad (faster)
int obmc_full_pixel_search_level;
// Accurate full pixel motion search based on TPL stats.
int full_pixel_search_level;
// Whether to downsample the rows in sad calculation during motion search.
// This is only active when there are at least 16 rows.
int use_downsampled_sad;
// Method to use for refining WARPED_CAUSAL motion vectors
// TODO(rachelbarker): Can this be unified with OBMC in some way?
WARP_SEARCH_METHOD warp_search_method;
// Maximum number of iterations in WARPED_CAUSAL refinement search
int warp_search_iters;
} MV_SPEED_FEATURES;
typedef struct INTER_MODE_SPEED_FEATURES {
// 2-pass inter mode model estimation where the preliminary pass skips
// transform search and uses a model to estimate rd, while the final pass
// computes the full transform search. Two types of models are supported:
// 0: not used
// 1: used with online dynamic rd model
// 2: used with static rd model
int inter_mode_rd_model_estimation;
// Bypass transform search based on skip rd
int txfm_rd_gate_level;
// Limit the inter mode tested in the RD loop
int reduce_inter_modes;
// This variable is used to cap the maximum number of times we skip testing a
// mode to be evaluated. A high value means we will be faster.
int adaptive_rd_thresh;
// Aggressively prune inter modes when best mode is skippable.
int prune_inter_modes_if_skippable;
// Drop less likely to be picked reference frames in the RD search.
// Has five levels for now: 0, 1, 2, 3 and 4, where higher levels prune more
// aggressively than lower ones. (0 means no pruning).
int selective_ref_frame;
// Prune reference frames for rectangular partitions.
// 0 implies no pruning
// 1 implies prune for extended partition
// 2 implies prune horiz, vert and extended partition
int prune_ref_frame_for_rect_partitions;
// Prune reference frames for ALTREF
int alt_ref_search_fp;
// flag to skip NEWMV mode in drl if the motion search result is the same
int skip_repeated_newmv;
#if CONFIG_IMPROVED_JMVD
// flag to early terminate jmvd scaling factors
int early_terminate_jmvd_scale_factor;
#endif // CONFIG_IMPROVED_JMVD
// Skip the current ref_mv in NEW_MV mode if we have already encountered
// another ref_mv in the drl such that:
// 1. The other drl has the same fullpel_mv during the SIMPLE_TRANSLATION
// search process as the current fullpel_mv.
// 2. The rate needed to encode the current fullpel_mv is larger than that
// for the other ref_mv.
int skip_repeated_full_newmv;
// This speed feature checks duplicate ref MVs among NEARMV and GLOBALMV and
// skips GLOBALMV if a duplicate is found
// TODO(any): Instead of skipping repeated ref mv, use the recalculated
// rd-cost based on mode rate and skip the mode evaluation
int skip_repeated_ref_mv;
// Flag used to control the ref_best_rd based gating for chroma
int perform_best_rd_based_gating_for_chroma;
// Reuse the inter_intra_mode search result for other single ref modes
int reuse_inter_intra_mode;
// prune wedge and compound segment approximate rd evaluation based on
// compound average modeled rd
int prune_comp_type_by_model_rd;
// prune wedge and compound segment approximate rd evaluation based on
// compound average rd/ref_best_rd
int prune_comp_type_by_comp_avg;
// Skip some ref frames in compound motion search by single motion search
// result. Has three levels for now: 0 referring to no skipping, and 1 - 3
// increasing aggressiveness of skipping in order.
// Note: The search order might affect the result. It assumes that the single
// reference modes are searched before compound modes. It is better to search
// same single inter mode as a group.
int prune_comp_search_by_single_result;
// If 1 we iterate finding a best reference for 2 ref frames together - via
// a log search that iterates 4 times (check around mv for last for best
// error of combined predictor then check around mv for alt). If 0 we
// we just use the best motion vector found for each frame by itself.
BLOCK_SIZE comp_inter_joint_search_thresh;
// Instead of performing a full MV search, do a simple translation first
// and only perform a full MV search on the motion vectors that performed
// well.
int prune_mode_search_simple_translation;
// Only search compound modes with at least one "good" reference frame.
// A reference frame is good if, after looking at its performance among
// the single reference modes, it is one of the two best performers.
int prune_compound_using_single_ref;
// Skip extended compound mode using ref frames of above and left neighbor
// blocks.
// 0 : no pruning
// 1 : prune extended compound mode (less aggressiveness)
// 2 : prune extended compound mode (high aggressiveness)
int prune_compound_using_neighbors;
// Skip extended compound mode when ref frame corresponding to NEWMV does not
// have NEWMV as single mode winner.
// 0 : no pruning
// 1 : prune extended compound mode (less aggressiveness)
// 2 : prune extended compound mode (high aggressiveness)
int prune_comp_using_best_single_mode_ref;
// Based on previous ref_mv_idx search result, prune the following search.
int prune_ref_mv_idx_search;
// Disable one sided compound modes.
int disable_onesided_comp;
// Prune/gate motion mode evaluation based on token based rd
// during transform search for inter blocks
// Values are 0 (not used) , 1 - 3 with progressively increasing
// aggressiveness
int prune_motion_mode_level;
// Prune obmc search using previous frame stats.
int prune_obmc_prob_thresh;
// Disable obmc.
int disable_obmc;
// Prune warped motion search using previous frame stats.
int prune_warped_prob_thresh;
// Enable/disable interintra wedge search.
int disable_wedge_interintra_search;
// De-couple wedge and mode search during interintra RDO.
int fast_interintra_wedge_search;
// Only enable wedge search if the variance is above this threshold.
unsigned int disable_wedge_search_var_thresh;
// Whether fast wedge sign estimate is used
int fast_wedge_sign_estimate;
// Whether to prune wedge search based on predictor difference
int prune_wedge_pred_diff_based;
// Enable/disable ME for interinter wedge search.
int disable_interinter_wedge_newmv_search;
// Enable/disable ME for interinter diffwtd search. PSNR BD-rate gain of
// ~0.1 on the lowres test set, but ~15% slower computation.
int enable_interinter_diffwtd_newmv_search;
// Enable/disable smooth inter-intra mode
int disable_smooth_interintra;
// Disable interinter_wedge
int disable_interinter_wedge;
// Whether to override and disable sb level coeff cost updates, if
// cpi->oxcf.cost_upd_freq.coeff = COST_UPD_SB (i.e. set at SB level)
int disable_sb_level_coeff_cost_upd;
// Whether to override and disable sb level mv cost updates, if
// cpi->oxcf.cost_upd_freq.coeff = COST_UPD_SB (i.e. set at SB level)
int disable_sb_level_mv_cost_upd;
// Prune inter modes based on tpl stats
// 0 : no pruning
// 1 - 3 indicate increasing aggressiveness in order.
int prune_inter_modes_based_on_tpl;
// Model based breakout after interpolation filter search
// 0: no breakout
// 1: use model based rd breakout
int model_based_post_interp_filter_breakout;
// Reuse compound type rd decision when exact match is found
// 0: No reuse
// 1: Reuse the compound type decision
int reuse_compound_type_decision;
// Enable/disable masked compound.
int disable_masked_comp;
#if CONFIG_EXT_RECUR_PARTITIONS
// Under ERP, determines whether to reuse partition mode and prediction mode
// if a block with the same (mi_row, mi_col, bsize) is visited more than one
// by the encoder.
int reuse_erp_mode_flag;
#endif // CONFIG_EXT_RECUR_PARTITIONS
} INTER_MODE_SPEED_FEATURES;
typedef struct INTERP_FILTER_SPEED_FEATURES {
// Save results of av1_interpolation_filter_search for a block
// Check mv and ref_frames before search, if they are very close with previous
// saved results, filter search can be skipped.
int use_interp_filter;
int cb_pred_filter_search;
} INTERP_FILTER_SPEED_FEATURES;
typedef struct INTRA_MODE_SPEED_FEATURES {
// These bit masks allow you to enable or disable intra modes for each
// transform size separately.
int intra_y_mode_mask[TX_SIZES];
int intra_uv_mode_mask[TX_SIZES];
// flag to allow skipping intra mode for inter frame prediction
int skip_intra_in_interframe;
// variance threshold for intra mode gating when inter turned out to be skip
// in inter frame prediction
unsigned int src_var_thresh_intra_skip;
// Prune intra mode candidates based on source block histogram of gradient.
int intra_pruning_with_hog;
// TODO(anyone): tune intra_pruning_with_hog_thresh for various speeds.
float intra_pruning_with_hog_thresh;
// Enable/disable smooth intra modes.
int disable_smooth_intra;
// prune palette search
// 0: No pruning
// 1: Perform coarse search to prune the palette colors. For winner colors,
// neighbors are also evaluated using a finer search.
// 2: Perform 2 way palette search from max colors to min colors (and min
// colors to remaining colors) and terminate the search if current number of
// palette colors is not the winner.
int prune_palette_search_level;
} INTRA_MODE_SPEED_FEATURES;
typedef struct TX_SPEED_FEATURES {
// Init search depth for square and rectangular transform partitions.
// Values:
// 0 - search full tree, 1: search 1 level, 2: search the highest level only
int inter_tx_size_search_init_depth_sqr;
int inter_tx_size_search_init_depth_rect;
int intra_tx_size_search_init_depth_sqr;
int intra_tx_size_search_init_depth_rect;
// If any dimension of a coding block size above 64, always search the
// largest transform only, since the largest transform block size is 64x64.
int tx_size_search_lgr_block;
TX_TYPE_SEARCH tx_type_search;
// Skip split transform block partition when the collocated bigger block
// is selected as all zero coefficients.
int txb_split_cap;
// Shortcut the transform block partition and type search when the target
// rdcost is relatively lower.
// Values are 0 (not used) , or 1 - 2 with progressively increasing
// aggressiveness
int adaptive_txb_search_level;
// Prune level for tx_size_type search for inter based on rd model
// 0: no pruning
// 1-2: progressively increasing aggressiveness of pruning
int model_based_prune_tx_search_level;
// Use hash table to store intra(keyframe only) txb transform search results
// to avoid repeated search on the same residue signal. This is currently not
// compatible with multi-winner mode as the hash states are reset during
// winner mode processing.
int use_intra_txb_hash;
// Use hash table to store inter txb transform search results
// to avoid repeated search on the same residue signal.
int use_inter_txb_hash;
// Refine TX type after fast TX search.
int refine_fast_tx_search_results;
#if CONFIG_EXT_RECUR_PARTITIONS
// On inter frames, use the smallest txfm size for block_sizes smaller than or
// equal to BLOCK_16X16.
bool use_largest_tx_size_for_small_bsize;
#endif // CONFIG_EXT_RECUR_PARTITIONS
} TX_SPEED_FEATURES;
typedef struct RD_CALC_SPEED_FEATURES {
// Fast approximation of av1_model_rd_from_var_lapndz
int simple_model_rd_from_var;
// Whether to compute distortion in the image domain (slower but
// more accurate), or in the transform domain (faster but less acurate).
// 0: use image domain
// 1: use transform domain in tx_type search, and use image domain for
// RD_STATS
// 2: use transform domain
int tx_domain_dist_level;
// Transform domain distortion threshold level
int tx_domain_dist_thres_level;
// Trellis (dynamic programming) optimization of quantized values
TRELLIS_OPT_TYPE optimize_coefficients;
// Use hash table to store macroblock RD search results
// to avoid repeated search on the same residue signal.
int use_mb_rd_hash;
// Flag used to control the extent of coeff R-D optimization
int perform_coeff_opt;
// Enable coeff R-D optimization based on SATD values.
// 0 : Do not disable coeff R-D opt.
// 1, 2 : Disable coeff R-D opt with progressively increasing aggressiveness.
int perform_coeff_opt_based_on_satd;
} RD_CALC_SPEED_FEATURES;
typedef struct WINNER_MODE_SPEED_FEATURES {
// Flag used to control the winner mode processing for better R-D optimization
// of quantized coeffs
int enable_winner_mode_for_coeff_opt;
// Flag used to control the winner mode processing for transform size
// search method
int enable_winner_mode_for_tx_size_srch;
// Control transform size search level
// Eval type: Default Mode Winner
// Level 0 : FULL RD LARGEST ALL FULL RD
// Level 1 : FAST RD LARGEST ALL FULL RD
// Level 2 : LARGEST ALL LARGEST ALL FULL RD
int tx_size_search_level;
// Flag used to control the winner mode processing for use transform
// domain distortion
int enable_winner_mode_for_use_tx_domain_dist;
// Flag used to enable processing of multiple winner modes
MULTI_WINNER_MODE_TYPE multi_winner_mode_type;
// Motion mode for winner candidates:
// 0: speed feature OFF
// 1 / 2 : Use configured number of winner candidates
int motion_mode_for_winner_cand;
// Early DC only txfm block prediction
// 0: speed feature OFF
// 1 / 2 : Use the configured level for different modes
int dc_blk_pred_level;
} WINNER_MODE_SPEED_FEATURES;
typedef struct LOOP_FILTER_SPEED_FEATURES {
// This feature controls how the loop filter level is determined.
LPF_PICK_METHOD lpf_pick;
// Control how the CDEF strength is determined.
CDEF_PICK_METHOD cdef_pick_method;
// Decoder side speed feature to add penalty for use of dual-sgr filters.
// Takes values 0 - 10, 0 indicating no penalty and each additional level
// adding a penalty of 1%
int dual_sgr_penalty_level;
// prune sgr ep using binary search like mechanism
int enable_sgr_ep_pruning;
// Disable loop restoration for Chroma plane
int disable_loop_restoration_chroma;
// Prune RESTORE_WIENER evaluation based on source variance
// 0 : no pruning
// 1 : conservative pruning
// 2 : aggressive pruning
int prune_wiener_based_on_src_var;
// Prune self-guided loop restoration based on wiener search results
// 0 : no pruning
// 1 : pruning based on rdcost ratio of RESTORE_WIENER and RESTORE_NONE
// 2 : pruning based on winner restoration type among RESTORE_WIENER and
// RESTORE_NONE
int prune_sgr_based_on_wiener;
// Reduce the wiener filter win size for luma
int reduce_wiener_window_size;
// Disable loop restoration filter
int disable_lr_filter;
} LOOP_FILTER_SPEED_FEATURES;
#if CONFIG_FLEX_MVRES
typedef struct FLEXMV_PRECISION_SPEED_FEATURES {
// Do not search 8-pel precision
int do_not_search_8_pel_precision;
// Do not search 4-pel precision
int do_not_search_4_pel_precision;
// enable early termination than 4-pel precision
int terminate_early_4_pel_precision;
// fast_obmc_search for low precisions
int low_prec_obmc_full_pixel_search_level;
// fast_obmc_search for low precisions
int skip_similar_ref_mv;
// Skip RDO of the repeated newMV for lower precisions.
int skip_repeated_newmv_low_prec;
// Fast refinement of MV for low precision. 1 means fast refinement is enabled
int fast_mv_refinement;
// fast motion search
int fast_motion_search_low_precision;
} FLEXMV_PRECISION_SPEED_FEATURES;
#endif
/*!\endcond */
/*!
* \brief Top level speed vs quality trade off data struture.
*/
typedef struct SPEED_FEATURES {
/*!
* Sequence/frame level speed features:
*/
HIGH_LEVEL_SPEED_FEATURES hl_sf;
/*!
* Speed features related to how tpl's searches are done.
*/
TPL_SPEED_FEATURES tpl_sf;
/*!
* Global motion speed features:
*/
GLOBAL_MOTION_SPEED_FEATURES gm_sf;
/*!
* Partition search speed features:
*/
PARTITION_SPEED_FEATURES part_sf;
/*!
* Motion search speed features:
*/
MV_SPEED_FEATURES mv_sf;
/*!
* Inter mode search speed features:
*/
INTER_MODE_SPEED_FEATURES inter_sf;
/*!
* Interpolation filter search speed features:
*/
INTERP_FILTER_SPEED_FEATURES interp_sf;
/*!
* Intra mode search speed features:
*/
INTRA_MODE_SPEED_FEATURES intra_sf;
/*!
* Transform size/type search speed features:
*/
TX_SPEED_FEATURES tx_sf;
/*!
* RD calculation speed features:
*/
RD_CALC_SPEED_FEATURES rd_sf;
/*!
* Two-pass mode evaluation features:
*/
WINNER_MODE_SPEED_FEATURES winner_mode_sf;
/*!
* In-loop filter speed features:
*/
LOOP_FILTER_SPEED_FEATURES lpf_sf;
#if CONFIG_FLEX_MVRES
/*!
* flexible MV precisions speed features:
*/
FLEXMV_PRECISION_SPEED_FEATURES flexmv_sf;
#endif
} SPEED_FEATURES;
/*!\cond */
struct AV1_COMP;
/*!\endcond */
/*!\brief Frame size independent speed vs quality trade off flags
*
*\ingroup speed_features
*
* \param[in] cpi Top - level encoder instance structure
* \param[in] speed Speed setting passed in from the command line
*
* No return value but configures the various speed trade off flags based
* on the passed in speed setting. (Higher speed gives lower quality).
*/
void av1_set_speed_features_framesize_independent(struct AV1_COMP *cpi,
int speed);
/*!\brief Frame size dependent speed vs quality trade off flags
*
*\ingroup speed_features
*
* \param[in] cpi Top - level encoder instance structure
* \param[in] speed Speed setting passed in from the command line
*
* No return value but configures the various speed trade off flags based
* on the passed in speed setting and frame size. (Higher speed corresponds
* to lower quality).
*/
void av1_set_speed_features_framesize_dependent(struct AV1_COMP *cpi,
int speed);
/*!\brief Q index dependent speed vs quality trade off flags
*
*\ingroup speed_features
*
* \param[in] cpi Top - level encoder instance structure
* \param[in] speed Speed setting passed in from the command line
*
* No return value but configures the various speed trade off flags based
* on the passed in speed setting and current frame's Q index.
* (Higher speed corresponds to lower quality).
*/
void av1_set_speed_features_qindex_dependent(struct AV1_COMP *cpi, int speed);
#ifdef __cplusplus
} // extern "C"
#endif
#endif // AOM_AV1_ENCODER_SPEED_FEATURES_H_