|  | /* | 
|  | * Copyright (c) 2021, Alliance for Open Media. All rights reserved | 
|  | * | 
|  | * This source code is subject to the terms of the BSD 3-Clause Clear License | 
|  | * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear | 
|  | * License was not distributed with this source code in the LICENSE file, you | 
|  | * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/.  If the | 
|  | * Alliance for Open Media Patent License 1.0 was not distributed with this | 
|  | * source code in the PATENTS file, you can obtain it at | 
|  | * aomedia.org/license/patent-license/. | 
|  | */ | 
|  |  | 
|  | #include <limits.h> | 
|  | #include <math.h> | 
|  | #include <stdio.h> | 
|  |  | 
|  | #include "config/aom_dsp_rtcd.h" | 
|  | #include "config/aom_scale_rtcd.h" | 
|  |  | 
|  | #include "aom_dsp/aom_dsp_common.h" | 
|  | #include "aom_dsp/variance.h" | 
|  | #include "aom_mem/aom_mem.h" | 
|  | #include "aom_ports/mem.h" | 
|  | #include "aom_ports/system_state.h" | 
|  | #include "aom_scale/aom_scale.h" | 
|  | #include "aom_scale/yv12config.h" | 
|  |  | 
|  | #include "av1/common/entropymv.h" | 
|  | #include "av1/common/quant_common.h" | 
|  | #include "av1/common/reconinter.h"  // av1_setup_dst_planes() | 
|  | #include "av1/common/txb_common.h" | 
|  | #include "av1/encoder/aq_variance.h" | 
|  | #include "av1/encoder/av1_quantize.h" | 
|  | #include "av1/encoder/block.h" | 
|  | #include "av1/encoder/dwt.h" | 
|  | #include "av1/encoder/encodeframe.h" | 
|  | #include "av1/encoder/encodemb.h" | 
|  | #include "av1/encoder/encodemv.h" | 
|  | #include "av1/encoder/encoder.h" | 
|  | #include "av1/encoder/encode_strategy.h" | 
|  | #include "av1/encoder/ethread.h" | 
|  | #include "av1/encoder/extend.h" | 
|  | #include "av1/encoder/firstpass.h" | 
|  | #include "av1/encoder/mcomp.h" | 
|  | #include "av1/encoder/rd.h" | 
|  | #include "av1/encoder/reconinter_enc.h" | 
|  |  | 
|  | #define OUTPUT_FPF 0 | 
|  |  | 
|  | #define FIRST_PASS_Q 10.0 | 
|  | #define INTRA_MODE_PENALTY 1024 | 
|  | #define NEW_MV_MODE_PENALTY 32 | 
|  | #define DARK_THRESH 64 | 
|  |  | 
|  | #define NCOUNT_INTRA_THRESH 8192 | 
|  | #define NCOUNT_INTRA_FACTOR 3 | 
|  |  | 
|  | static AOM_INLINE void output_stats(FIRSTPASS_STATS *stats, | 
|  | struct aom_codec_pkt_list *pktlist) { | 
|  | struct aom_codec_cx_pkt pkt; | 
|  | pkt.kind = AOM_CODEC_STATS_PKT; | 
|  | pkt.data.twopass_stats.buf = stats; | 
|  | pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS); | 
|  | if (pktlist != NULL) aom_codec_pkt_list_add(pktlist, &pkt); | 
|  |  | 
|  | // TEMP debug code | 
|  | #if OUTPUT_FPF | 
|  | { | 
|  | FILE *fpfile; | 
|  | fpfile = fopen("firstpass.stt", "a"); | 
|  |  | 
|  | fprintf(fpfile, | 
|  | "%12.0lf %12.4lf %12.0lf %12.0lf %12.0lf %12.4lf %12.4lf" | 
|  | "%12.4lf %12.4lf %12.4lf %12.4lf %12.4lf %12.4lf %12.4lf %12.4lf" | 
|  | "%12.4lf %12.4lf %12.0lf %12.0lf %12.0lf %12.4lf %12.4lf\n", | 
|  | stats->frame, stats->weight, stats->intra_error, stats->coded_error, | 
|  | stats->sr_coded_error, stats->pcnt_inter, stats->pcnt_motion, | 
|  | stats->pcnt_second_ref, stats->pcnt_neutral, stats->intra_skip_pct, | 
|  | stats->inactive_zone_rows, stats->inactive_zone_cols, stats->MVr, | 
|  | stats->mvr_abs, stats->MVc, stats->mvc_abs, stats->MVrv, | 
|  | stats->MVcv, stats->mv_in_out_count, stats->new_mv_count, | 
|  | stats->count, stats->duration); | 
|  | fclose(fpfile); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | void av1_twopass_zero_stats(FIRSTPASS_STATS *section) { | 
|  | section->frame = 0.0; | 
|  | section->weight = 0.0; | 
|  | section->intra_error = 0.0; | 
|  | section->frame_avg_wavelet_energy = 0.0; | 
|  | section->coded_error = 0.0; | 
|  | section->sr_coded_error = 0.0; | 
|  | section->pcnt_inter = 0.0; | 
|  | section->pcnt_motion = 0.0; | 
|  | section->pcnt_second_ref = 0.0; | 
|  | section->pcnt_neutral = 0.0; | 
|  | section->intra_skip_pct = 0.0; | 
|  | section->inactive_zone_rows = 0.0; | 
|  | section->inactive_zone_cols = 0.0; | 
|  | section->MVr = 0.0; | 
|  | section->mvr_abs = 0.0; | 
|  | section->MVc = 0.0; | 
|  | section->mvc_abs = 0.0; | 
|  | section->MVrv = 0.0; | 
|  | section->MVcv = 0.0; | 
|  | section->mv_in_out_count = 0.0; | 
|  | section->new_mv_count = 0.0; | 
|  | section->count = 0.0; | 
|  | section->duration = 1.0; | 
|  | } | 
|  |  | 
|  | void av1_accumulate_stats(FIRSTPASS_STATS *section, | 
|  | const FIRSTPASS_STATS *frame) { | 
|  | section->frame += frame->frame; | 
|  | section->weight += frame->weight; | 
|  | section->intra_error += frame->intra_error; | 
|  | section->frame_avg_wavelet_energy += frame->frame_avg_wavelet_energy; | 
|  | section->coded_error += frame->coded_error; | 
|  | section->sr_coded_error += frame->sr_coded_error; | 
|  | section->pcnt_inter += frame->pcnt_inter; | 
|  | section->pcnt_motion += frame->pcnt_motion; | 
|  | section->pcnt_second_ref += frame->pcnt_second_ref; | 
|  | section->pcnt_neutral += frame->pcnt_neutral; | 
|  | section->intra_skip_pct += frame->intra_skip_pct; | 
|  | section->inactive_zone_rows += frame->inactive_zone_rows; | 
|  | section->inactive_zone_cols += frame->inactive_zone_cols; | 
|  | section->MVr += frame->MVr; | 
|  | section->mvr_abs += frame->mvr_abs; | 
|  | section->MVc += frame->MVc; | 
|  | section->mvc_abs += frame->mvc_abs; | 
|  | section->MVrv += frame->MVrv; | 
|  | section->MVcv += frame->MVcv; | 
|  | section->mv_in_out_count += frame->mv_in_out_count; | 
|  | section->new_mv_count += frame->new_mv_count; | 
|  | section->count += frame->count; | 
|  | section->duration += frame->duration; | 
|  | } | 
|  |  | 
|  | void av1_end_first_pass(AV1_COMP *cpi) { | 
|  | if (cpi->twopass.stats_buf_ctx->total_stats) | 
|  | output_stats(cpi->twopass.stats_buf_ctx->total_stats, cpi->output_pkt_list); | 
|  | } | 
|  |  | 
|  | static aom_variance_fn_t get_block_variance_fn(BLOCK_SIZE bsize) { | 
|  | switch (bsize) { | 
|  | case BLOCK_8X8: return aom_mse8x8; | 
|  | case BLOCK_16X8: return aom_mse16x8; | 
|  | case BLOCK_8X16: return aom_mse8x16; | 
|  | default: return aom_mse16x16; | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int get_prediction_error(BLOCK_SIZE bsize, | 
|  | const struct buf_2d *src, | 
|  | const struct buf_2d *ref) { | 
|  | unsigned int sse; | 
|  | const aom_variance_fn_t fn = get_block_variance_fn(bsize); | 
|  | fn(src->buf, src->stride, ref->buf, ref->stride, &sse); | 
|  | return sse; | 
|  | } | 
|  |  | 
|  | static aom_variance_fn_t highbd_get_block_variance_fn(BLOCK_SIZE bsize, | 
|  | int bd) { | 
|  | switch (bd) { | 
|  | default: | 
|  | switch (bsize) { | 
|  | case BLOCK_8X8: return aom_highbd_8_mse8x8; | 
|  | case BLOCK_16X8: return aom_highbd_8_mse16x8; | 
|  | case BLOCK_8X16: return aom_highbd_8_mse8x16; | 
|  | default: return aom_highbd_8_mse16x16; | 
|  | } | 
|  | break; | 
|  | case 10: | 
|  | switch (bsize) { | 
|  | case BLOCK_8X8: return aom_highbd_10_mse8x8; | 
|  | case BLOCK_16X8: return aom_highbd_10_mse16x8; | 
|  | case BLOCK_8X16: return aom_highbd_10_mse8x16; | 
|  | default: return aom_highbd_10_mse16x16; | 
|  | } | 
|  | break; | 
|  | case 12: | 
|  | switch (bsize) { | 
|  | case BLOCK_8X8: return aom_highbd_12_mse8x8; | 
|  | case BLOCK_16X8: return aom_highbd_12_mse16x8; | 
|  | case BLOCK_8X16: return aom_highbd_12_mse8x16; | 
|  | default: return aom_highbd_12_mse16x16; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int highbd_get_prediction_error(BLOCK_SIZE bsize, | 
|  | const struct buf_2d *src, | 
|  | const struct buf_2d *ref, | 
|  | int bd) { | 
|  | unsigned int sse; | 
|  | const aom_variance_fn_t fn = highbd_get_block_variance_fn(bsize, bd); | 
|  | fn(src->buf, src->stride, ref->buf, ref->stride, &sse); | 
|  | return sse; | 
|  | } | 
|  |  | 
|  | // Refine the motion search range according to the frame dimension | 
|  | // for first pass test. | 
|  | static int get_search_range(const InitialDimensions *initial_dimensions) { | 
|  | int sr = 0; | 
|  | const int dim = AOMMIN(initial_dimensions->width, initial_dimensions->height); | 
|  |  | 
|  | while ((dim << sr) < MAX_FULL_PEL_VAL) ++sr; | 
|  | return sr; | 
|  | } | 
|  |  | 
|  | static AOM_INLINE void first_pass_motion_search(AV1_COMP *cpi, MACROBLOCK *x, | 
|  | const MV *ref_mv, | 
|  | FULLPEL_MV *best_mv, | 
|  | int *best_motion_err) { | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | FULLPEL_MV start_mv = get_fullmv_from_mv(ref_mv); | 
|  | int tmp_err; | 
|  | #if CONFIG_SDP | 
|  | const BLOCK_SIZE bsize = xd->mi[0]->sb_type[xd->tree_type == CHROMA_PART]; | 
|  | #else | 
|  | const BLOCK_SIZE bsize = xd->mi[0]->sb_type; | 
|  | #endif | 
|  | const int new_mv_mode_penalty = NEW_MV_MODE_PENALTY; | 
|  | const int sr = get_search_range(&cpi->initial_dimensions); | 
|  | const int step_param = 3 + sr; | 
|  |  | 
|  | const search_site_config *first_pass_search_sites = | 
|  | cpi->mv_search_params.search_site_cfg[SS_CFG_FPF]; | 
|  | const int fine_search_interval = | 
|  | cpi->is_screen_content_type && cpi->common.features.allow_intrabc; | 
|  | if (fine_search_interval) { | 
|  | av1_set_speed_features_framesize_independent(cpi, cpi->oxcf.speed); | 
|  | } | 
|  | FULLPEL_MOTION_SEARCH_PARAMS ms_params; | 
|  | av1_make_default_fullpel_ms_params(&ms_params, cpi, x, bsize, ref_mv, | 
|  | first_pass_search_sites, | 
|  | fine_search_interval); | 
|  | av1_set_mv_search_method(&ms_params, first_pass_search_sites, NSTEP); | 
|  |  | 
|  | FULLPEL_MV this_best_mv; | 
|  | tmp_err = av1_full_pixel_search(start_mv, &ms_params, step_param, NULL, | 
|  | &this_best_mv, NULL); | 
|  |  | 
|  | if (tmp_err < INT_MAX) { | 
|  | aom_variance_fn_ptr_t v_fn_ptr = cpi->fn_ptr[bsize]; | 
|  | const MSBuffers *ms_buffers = &ms_params.ms_buffers; | 
|  | tmp_err = av1_get_mvpred_sse(&ms_params.mv_cost_params, this_best_mv, | 
|  | &v_fn_ptr, ms_buffers->src, ms_buffers->ref) + | 
|  | new_mv_mode_penalty; | 
|  | } | 
|  |  | 
|  | if (tmp_err < *best_motion_err) { | 
|  | *best_motion_err = tmp_err; | 
|  | *best_mv = this_best_mv; | 
|  | } | 
|  | } | 
|  |  | 
|  | static BLOCK_SIZE get_bsize(const CommonModeInfoParams *const mi_params, | 
|  | int mb_row, int mb_col) { | 
|  | if (mi_size_wide[BLOCK_16X16] * mb_col + mi_size_wide[BLOCK_8X8] < | 
|  | mi_params->mi_cols) { | 
|  | return mi_size_wide[BLOCK_16X16] * mb_row + mi_size_wide[BLOCK_8X8] < | 
|  | mi_params->mi_rows | 
|  | ? BLOCK_16X16 | 
|  | : BLOCK_16X8; | 
|  | } else { | 
|  | return mi_size_wide[BLOCK_16X16] * mb_row + mi_size_wide[BLOCK_8X8] < | 
|  | mi_params->mi_rows | 
|  | ? BLOCK_8X16 | 
|  | : BLOCK_8X8; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int find_fp_qindex(aom_bit_depth_t bit_depth) { | 
|  | aom_clear_system_state(); | 
|  | #if CONFIG_EXTQUANT | 
|  | return av1_find_qindex(FIRST_PASS_Q, bit_depth, 0, | 
|  | bit_depth == AOM_BITS_8    ? QINDEX_RANGE_8_BITS - 1 | 
|  | : bit_depth == AOM_BITS_10 ? QINDEX_RANGE_10_BITS - 1 | 
|  | : QINDEX_RANGE - 1); | 
|  | #else | 
|  | return av1_find_qindex(FIRST_PASS_Q, bit_depth, 0, QINDEX_RANGE - 1); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static double raw_motion_error_stdev(int *raw_motion_err_list, | 
|  | int raw_motion_err_counts) { | 
|  | int64_t sum_raw_err = 0; | 
|  | double raw_err_avg = 0; | 
|  | double raw_err_stdev = 0; | 
|  | if (raw_motion_err_counts == 0) return 0; | 
|  |  | 
|  | int i; | 
|  | for (i = 0; i < raw_motion_err_counts; i++) { | 
|  | sum_raw_err += raw_motion_err_list[i]; | 
|  | } | 
|  | raw_err_avg = (double)sum_raw_err / raw_motion_err_counts; | 
|  | for (i = 0; i < raw_motion_err_counts; i++) { | 
|  | raw_err_stdev += (raw_motion_err_list[i] - raw_err_avg) * | 
|  | (raw_motion_err_list[i] - raw_err_avg); | 
|  | } | 
|  | // Calculate the standard deviation for the motion error of all the inter | 
|  | // blocks of the 0,0 motion using the last source | 
|  | // frame as the reference. | 
|  | raw_err_stdev = sqrt(raw_err_stdev / raw_motion_err_counts); | 
|  | return raw_err_stdev; | 
|  | } | 
|  |  | 
|  | #define UL_INTRA_THRESH 50 | 
|  | #define INVALID_ROW -1 | 
|  | // Computes and returns the intra pred error of a block. | 
|  | // intra pred error: sum of squared error of the intra predicted residual. | 
|  | // Inputs: | 
|  | //   cpi: the encoder setting. Only a few params in it will be used. | 
|  | //   this_frame: the current frame buffer. | 
|  | //   tile: tile information (not used in first pass, already init to zero) | 
|  | //   mb_row: row index in the unit of first pass block size. | 
|  | //   mb_col: column index in the unit of first pass block size. | 
|  | //   y_offset: the offset of y frame buffer, indicating the starting point of | 
|  | //             the current block. | 
|  | //   uv_offset: the offset of u and v frame buffer, indicating the starting | 
|  | //              point of the current block. | 
|  | //   fp_block_size: first pass block size. | 
|  | //   qindex: quantization step size to encode the frame. | 
|  | //   stats: frame encoding stats. | 
|  | // Modifies: | 
|  | //   stats->intra_skip_count | 
|  | //   stats->image_data_start_row | 
|  | //   stats->intra_factor | 
|  | //   stats->brightness_factor | 
|  | //   stats->intra_error | 
|  | //   stats->frame_avg_wavelet_energy | 
|  | // Returns: | 
|  | //   this_intra_error. | 
|  | static int firstpass_intra_prediction( | 
|  | AV1_COMP *cpi, ThreadData *td, YV12_BUFFER_CONFIG *const this_frame, | 
|  | const TileInfo *const tile, const int mb_row, const int mb_col, | 
|  | const int y_offset, const int uv_offset, const BLOCK_SIZE fp_block_size, | 
|  | const int qindex, FRAME_STATS *const stats) { | 
|  | const AV1_COMMON *const cm = &cpi->common; | 
|  | const CommonModeInfoParams *const mi_params = &cm->mi_params; | 
|  | const SequenceHeader *const seq_params = &cm->seq_params; | 
|  | MACROBLOCK *const x = &td->mb; | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | const int mb_scale = mi_size_wide[fp_block_size]; | 
|  | const int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row); | 
|  | const int num_planes = av1_num_planes(cm); | 
|  | const BLOCK_SIZE bsize = get_bsize(mi_params, mb_row, mb_col); | 
|  |  | 
|  | aom_clear_system_state(); | 
|  | set_mi_offsets(mi_params, xd, mb_row * mb_scale, mb_col * mb_scale); | 
|  | xd->plane[0].dst.buf = this_frame->y_buffer + y_offset; | 
|  | xd->plane[1].dst.buf = this_frame->u_buffer + uv_offset; | 
|  | xd->plane[2].dst.buf = this_frame->v_buffer + uv_offset; | 
|  | xd->left_available = (mb_col != 0); | 
|  | #if CONFIG_SDP | 
|  | xd->mi[0]->sb_type[xd->tree_type == CHROMA_PART] = bsize; | 
|  | #else | 
|  | xd->mi[0]->sb_type = bsize; | 
|  | #endif | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | xd->mi[0]->ref_frame[0] = INTRA_FRAME_NRS; | 
|  | #else | 
|  | xd->mi[0]->ref_frame[0] = INTRA_FRAME; | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  | set_mi_row_col(xd, tile, mb_row * mb_scale, mi_size_high[bsize], | 
|  | mb_col * mb_scale, mi_size_wide[bsize], mi_params->mi_rows, | 
|  | mi_params->mi_cols); | 
|  | set_plane_n4(xd, mi_size_wide[bsize], mi_size_high[bsize], num_planes); | 
|  | xd->mi[0]->segment_id = 0; | 
|  | xd->lossless[xd->mi[0]->segment_id] = (qindex == 0); | 
|  | xd->mi[0]->mode = DC_PRED; | 
|  | xd->mi[0]->tx_size = | 
|  | use_dc_pred ? (bsize >= fp_block_size ? TX_16X16 : TX_8X8) : TX_4X4; | 
|  |  | 
|  | av1_encode_intra_block_plane(cpi, x, bsize, 0, DRY_RUN_NORMAL, 0); | 
|  | int this_intra_error = aom_get_mb_ss(x->plane[0].src_diff); | 
|  | if (seq_params->use_highbitdepth) { | 
|  | switch (seq_params->bit_depth) { | 
|  | case AOM_BITS_8: break; | 
|  | case AOM_BITS_10: this_intra_error >>= 4; break; | 
|  | case AOM_BITS_12: this_intra_error >>= 8; break; | 
|  | default: | 
|  | assert(0 && | 
|  | "seq_params->bit_depth should be AOM_BITS_8, " | 
|  | "AOM_BITS_10 or AOM_BITS_12"); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (this_intra_error < UL_INTRA_THRESH) { | 
|  | ++stats->intra_skip_count; | 
|  | } else if ((mb_col > 0) && (stats->image_data_start_row == INVALID_ROW)) { | 
|  | stats->image_data_start_row = mb_row; | 
|  | } | 
|  |  | 
|  | aom_clear_system_state(); | 
|  | double log_intra = log(this_intra_error + 1.0); | 
|  | if (log_intra < 10.0) { | 
|  | stats->intra_factor += 1.0 + ((10.0 - log_intra) * 0.05); | 
|  | } else { | 
|  | stats->intra_factor += 1.0; | 
|  | } | 
|  |  | 
|  | int level_sample; | 
|  | if (seq_params->use_highbitdepth) { | 
|  | level_sample = CONVERT_TO_SHORTPTR(x->plane[0].src.buf)[0]; | 
|  | } else { | 
|  | level_sample = x->plane[0].src.buf[0]; | 
|  | } | 
|  |  | 
|  | if (seq_params->use_highbitdepth) { | 
|  | switch (seq_params->bit_depth) { | 
|  | case AOM_BITS_8: break; | 
|  | case AOM_BITS_10: level_sample >>= 2; break; | 
|  | case AOM_BITS_12: level_sample >>= 4; break; | 
|  | default: | 
|  | assert(0 && | 
|  | "seq_params->bit_depth should be AOM_BITS_8, " | 
|  | "AOM_BITS_10 or AOM_BITS_12"); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  | if ((level_sample < DARK_THRESH) && (log_intra < 9.0)) { | 
|  | stats->brightness_factor += 1.0 + (0.01 * (DARK_THRESH - level_sample)); | 
|  | } else { | 
|  | stats->brightness_factor += 1.0; | 
|  | } | 
|  |  | 
|  | // Intrapenalty below deals with situations where the intra and inter | 
|  | // error scores are very low (e.g. a plain black frame). | 
|  | // We do not have special cases in first pass for 0,0 and nearest etc so | 
|  | // all inter modes carry an overhead cost estimate for the mv. | 
|  | // When the error score is very low this causes us to pick all or lots of | 
|  | // INTRA modes and throw lots of key frames. | 
|  | // This penalty adds a cost matching that of a 0,0 mv to the intra case. | 
|  | this_intra_error += INTRA_MODE_PENALTY; | 
|  |  | 
|  | // Accumulate the intra error. | 
|  | stats->intra_error += (int64_t)this_intra_error; | 
|  |  | 
|  | const int hbd = is_cur_buf_hbd(xd); | 
|  | const int stride = x->plane[0].src.stride; | 
|  | uint8_t *buf = x->plane[0].src.buf; | 
|  | for (int r8 = 0; r8 < 2; ++r8) { | 
|  | for (int c8 = 0; c8 < 2; ++c8) { | 
|  | stats->frame_avg_wavelet_energy += av1_haar_ac_sad_8x8_uint8_input( | 
|  | buf + c8 * 8 + r8 * 8 * stride, stride, hbd); | 
|  | } | 
|  | } | 
|  |  | 
|  | return this_intra_error; | 
|  | } | 
|  |  | 
|  | // Returns the sum of square error between source and reference blocks. | 
|  | static int get_prediction_error_bitdepth(const int is_high_bitdepth, | 
|  | const int bitdepth, | 
|  | const BLOCK_SIZE block_size, | 
|  | const struct buf_2d *src, | 
|  | const struct buf_2d *ref) { | 
|  | if (is_high_bitdepth) { | 
|  | return highbd_get_prediction_error(block_size, src, ref, bitdepth); | 
|  | } | 
|  | return get_prediction_error(block_size, src, ref); | 
|  | } | 
|  |  | 
|  | // Accumulates motion vector stats. | 
|  | // Modifies member variables of "stats". | 
|  | static void accumulate_mv_stats(const MV best_mv, const FULLPEL_MV mv, | 
|  | const int mb_row, const int mb_col, | 
|  | const int mb_rows, const int mb_cols, | 
|  | MV *last_mv, FRAME_STATS *stats) { | 
|  | if (is_zero_mv(&best_mv)) return; | 
|  |  | 
|  | ++stats->mv_count; | 
|  | // Non-zero vector, was it different from the last non zero vector? | 
|  | if (!is_equal_mv(&best_mv, last_mv)) ++stats->new_mv_count; | 
|  | *last_mv = best_mv; | 
|  |  | 
|  | // Does the row vector point inwards or outwards? | 
|  | if (mb_row < mb_rows / 2) { | 
|  | if (mv.row > 0) { | 
|  | --stats->sum_in_vectors; | 
|  | } else if (mv.row < 0) { | 
|  | ++stats->sum_in_vectors; | 
|  | } | 
|  | } else if (mb_row > mb_rows / 2) { | 
|  | if (mv.row > 0) { | 
|  | ++stats->sum_in_vectors; | 
|  | } else if (mv.row < 0) { | 
|  | --stats->sum_in_vectors; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Does the col vector point inwards or outwards? | 
|  | if (mb_col < mb_cols / 2) { | 
|  | if (mv.col > 0) { | 
|  | --stats->sum_in_vectors; | 
|  | } else if (mv.col < 0) { | 
|  | ++stats->sum_in_vectors; | 
|  | } | 
|  | } else if (mb_col > mb_cols / 2) { | 
|  | if (mv.col > 0) { | 
|  | ++stats->sum_in_vectors; | 
|  | } else if (mv.col < 0) { | 
|  | --stats->sum_in_vectors; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #define LOW_MOTION_ERROR_THRESH 25 | 
|  | // Computes and returns the inter prediction error from the last frame. | 
|  | // Computes inter prediction errors from the golden and alt ref frams and | 
|  | // Updates stats accordingly. | 
|  | // Inputs: | 
|  | //   cpi: the encoder setting. Only a few params in it will be used. | 
|  | //   last_frame: the frame buffer of the last frame. | 
|  | //   golden_frame: the frame buffer of the golden frame. | 
|  | //   alt_ref_frame: the frame buffer of the alt ref frame. | 
|  | //   mb_row: row index in the unit of first pass block size. | 
|  | //   mb_col: column index in the unit of first pass block size. | 
|  | //   recon_yoffset: the y offset of the reconstructed  frame buffer, | 
|  | //                  indicating the starting point of the current block. | 
|  | //   recont_uvoffset: the u/v offset of the reconstructed frame buffer, | 
|  | //                    indicating the starting point of the current block. | 
|  | //   src_yoffset: the y offset of the source frame buffer. | 
|  | //   alt_ref_frame_offset: the y offset of the alt ref frame buffer. | 
|  | //   fp_block_size: first pass block size. | 
|  | //   this_intra_error: the intra prediction error of this block. | 
|  | //   raw_motion_err_counts: the count of raw motion vectors. | 
|  | //   raw_motion_err_list: the array that records the raw motion error. | 
|  | //   best_ref_mv: best reference mv found so far. | 
|  | //   last_mv: last mv. | 
|  | //   stats: frame encoding stats. | 
|  | //  Modifies: | 
|  | //    raw_motion_err_list | 
|  | //    best_ref_mv | 
|  | //    last_mv | 
|  | //    stats: many member params in it. | 
|  | //  Returns: | 
|  | //    this_inter_error | 
|  | static int firstpass_inter_prediction( | 
|  | AV1_COMP *cpi, ThreadData *td, const YV12_BUFFER_CONFIG *const last_frame, | 
|  | const YV12_BUFFER_CONFIG *const golden_frame, | 
|  | const YV12_BUFFER_CONFIG *const alt_ref_frame, const int mb_row, | 
|  | const int mb_col, const int recon_yoffset, const int recon_uvoffset, | 
|  | const int src_yoffset, const int alt_ref_frame_yoffset, | 
|  | const BLOCK_SIZE fp_block_size, const int this_intra_error, | 
|  | const int raw_motion_err_counts, int *raw_motion_err_list, MV *best_ref_mv, | 
|  | MV *last_mv, FRAME_STATS *stats) { | 
|  | int this_inter_error = this_intra_error; | 
|  | AV1_COMMON *const cm = &cpi->common; | 
|  | const CommonModeInfoParams *const mi_params = &cm->mi_params; | 
|  | CurrentFrame *const current_frame = &cm->current_frame; | 
|  | MACROBLOCK *const x = &td->mb; | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | const int is_high_bitdepth = is_cur_buf_hbd(xd); | 
|  | const int bitdepth = xd->bd; | 
|  | const int mb_scale = mi_size_wide[fp_block_size]; | 
|  | const BLOCK_SIZE bsize = get_bsize(mi_params, mb_row, mb_col); | 
|  | const int fp_block_size_height = block_size_wide[fp_block_size]; | 
|  | // Assume 0,0 motion with no mv overhead. | 
|  | FULLPEL_MV mv = kZeroFullMv; | 
|  | FULLPEL_MV tmp_mv = kZeroFullMv; | 
|  | xd->plane[0].pre[0].buf = last_frame->y_buffer + recon_yoffset; | 
|  | // Set up limit values for motion vectors to prevent them extending | 
|  | // outside the UMV borders. | 
|  | av1_set_mv_col_limits(mi_params, &x->mv_limits, (mb_col << FP_MIB_SIZE_LOG2), | 
|  | (fp_block_size_height >> MI_SIZE_LOG2), | 
|  | cpi->oxcf.border_in_pixels); | 
|  |  | 
|  | int motion_error = | 
|  | get_prediction_error_bitdepth(is_high_bitdepth, bitdepth, bsize, | 
|  | &x->plane[0].src, &xd->plane[0].pre[0]); | 
|  |  | 
|  | // Compute the motion error of the 0,0 motion using the last source | 
|  | // frame as the reference. Skip the further motion search on | 
|  | // reconstructed frame if this error is small. | 
|  | struct buf_2d unscaled_last_source_buf_2d; | 
|  | unscaled_last_source_buf_2d.buf = | 
|  | cpi->unscaled_last_source->y_buffer + src_yoffset; | 
|  | unscaled_last_source_buf_2d.stride = cpi->unscaled_last_source->y_stride; | 
|  | const int raw_motion_error = get_prediction_error_bitdepth( | 
|  | is_high_bitdepth, bitdepth, bsize, &x->plane[0].src, | 
|  | &unscaled_last_source_buf_2d); | 
|  | raw_motion_err_list[raw_motion_err_counts] = raw_motion_error; | 
|  |  | 
|  | // TODO(pengchong): Replace the hard-coded threshold | 
|  | if (raw_motion_error > LOW_MOTION_ERROR_THRESH) { | 
|  | // Test last reference frame using the previous best mv as the | 
|  | // starting point (best reference) for the search. | 
|  | first_pass_motion_search(cpi, x, best_ref_mv, &mv, &motion_error); | 
|  |  | 
|  | // If the current best reference mv is not centered on 0,0 then do a | 
|  | // 0,0 based search as well. | 
|  | if (!is_zero_mv(best_ref_mv)) { | 
|  | int tmp_err = INT_MAX; | 
|  | first_pass_motion_search(cpi, x, &kZeroMv, &tmp_mv, &tmp_err); | 
|  |  | 
|  | if (tmp_err < motion_error) { | 
|  | motion_error = tmp_err; | 
|  | mv = tmp_mv; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Motion search in 2nd reference frame. | 
|  | int gf_motion_error = motion_error; | 
|  | if ((current_frame->frame_number > 1) && golden_frame != NULL) { | 
|  | // Assume 0,0 motion with no mv overhead. | 
|  | xd->plane[0].pre[0].buf = golden_frame->y_buffer + recon_yoffset; | 
|  | xd->plane[0].pre[0].stride = golden_frame->y_stride; | 
|  | gf_motion_error = | 
|  | get_prediction_error_bitdepth(is_high_bitdepth, bitdepth, bsize, | 
|  | &x->plane[0].src, &xd->plane[0].pre[0]); | 
|  | first_pass_motion_search(cpi, x, &kZeroMv, &tmp_mv, &gf_motion_error); | 
|  | } | 
|  | if (gf_motion_error < motion_error && gf_motion_error < this_intra_error) { | 
|  | ++stats->second_ref_count; | 
|  | } | 
|  | // In accumulating a score for the 2nd reference frame take the | 
|  | // best of the motion predicted score and the intra coded error | 
|  | // (just as will be done for) accumulation of "coded_error" for | 
|  | // the last frame. | 
|  | if ((current_frame->frame_number > 1) && golden_frame != NULL) { | 
|  | stats->sr_coded_error += AOMMIN(gf_motion_error, this_intra_error); | 
|  | } else { | 
|  | // TODO(chengchen): I believe logically this should also be changed to | 
|  | // stats->sr_coded_error += AOMMIN(gf_motion_error, this_intra_error). | 
|  | stats->sr_coded_error += motion_error; | 
|  | } | 
|  |  | 
|  | // Motion search in 3rd reference frame. | 
|  | int alt_motion_error = motion_error; | 
|  | if (alt_ref_frame != NULL) { | 
|  | xd->plane[0].pre[0].buf = alt_ref_frame->y_buffer + alt_ref_frame_yoffset; | 
|  | xd->plane[0].pre[0].stride = alt_ref_frame->y_stride; | 
|  | alt_motion_error = | 
|  | get_prediction_error_bitdepth(is_high_bitdepth, bitdepth, bsize, | 
|  | &x->plane[0].src, &xd->plane[0].pre[0]); | 
|  | first_pass_motion_search(cpi, x, &kZeroMv, &tmp_mv, &alt_motion_error); | 
|  | } | 
|  | if (alt_motion_error < motion_error && alt_motion_error < gf_motion_error && | 
|  | alt_motion_error < this_intra_error) { | 
|  | ++stats->third_ref_count; | 
|  | } | 
|  | // In accumulating a score for the 3rd reference frame take the | 
|  | // best of the motion predicted score and the intra coded error | 
|  | // (just as will be done for) accumulation of "coded_error" for | 
|  | // the last frame. | 
|  | if (alt_ref_frame != NULL) { | 
|  | stats->tr_coded_error += AOMMIN(alt_motion_error, this_intra_error); | 
|  | } else { | 
|  | // TODO(chengchen): I believe logically this should also be changed to | 
|  | // stats->tr_coded_error += AOMMIN(alt_motion_error, this_intra_error). | 
|  | stats->tr_coded_error += motion_error; | 
|  | } | 
|  |  | 
|  | // Reset to last frame as reference buffer. | 
|  | xd->plane[0].pre[0].buf = last_frame->y_buffer + recon_yoffset; | 
|  | xd->plane[1].pre[0].buf = last_frame->u_buffer + recon_uvoffset; | 
|  | xd->plane[2].pre[0].buf = last_frame->v_buffer + recon_uvoffset; | 
|  | } else { | 
|  | stats->sr_coded_error += motion_error; | 
|  | stats->tr_coded_error += motion_error; | 
|  | } | 
|  |  | 
|  | // Start by assuming that intra mode is best. | 
|  | best_ref_mv->row = 0; | 
|  | best_ref_mv->col = 0; | 
|  |  | 
|  | if (motion_error <= this_intra_error) { | 
|  | aom_clear_system_state(); | 
|  |  | 
|  | // Keep a count of cases where the inter and intra were very close | 
|  | // and very low. This helps with scene cut detection for example in | 
|  | // cropped clips with black bars at the sides or top and bottom. | 
|  | if (((this_intra_error - INTRA_MODE_PENALTY) * 9 <= motion_error * 10) && | 
|  | (this_intra_error < (2 * INTRA_MODE_PENALTY))) { | 
|  | stats->neutral_count += 1.0; | 
|  | // Also track cases where the intra is not much worse than the inter | 
|  | // and use this in limiting the GF/arf group length. | 
|  | } else if ((this_intra_error > NCOUNT_INTRA_THRESH) && | 
|  | (this_intra_error < (NCOUNT_INTRA_FACTOR * motion_error))) { | 
|  | stats->neutral_count += | 
|  | (double)motion_error / DOUBLE_DIVIDE_CHECK((double)this_intra_error); | 
|  | } | 
|  |  | 
|  | const MV best_mv = get_mv_from_fullmv(&mv); | 
|  | this_inter_error = motion_error; | 
|  | xd->mi[0]->mode = NEWMV; | 
|  | xd->mi[0]->mv[0].as_mv = best_mv; | 
|  | xd->mi[0]->tx_size = TX_4X4; | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | xd->mi[0]->ref_frame[0] = get_closest_pastcur_ref_index(cm); | 
|  | xd->mi[0]->ref_frame[1] = INVALID_IDX; | 
|  | #else | 
|  | xd->mi[0]->ref_frame[0] = LAST_FRAME; | 
|  | xd->mi[0]->ref_frame[1] = NONE_FRAME; | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  | av1_enc_build_inter_predictor(cm, xd, mb_row * mb_scale, mb_col * mb_scale, | 
|  | NULL, bsize, AOM_PLANE_Y, AOM_PLANE_Y); | 
|  | av1_encode_sby_pass1(cpi, x, bsize); | 
|  | stats->sum_mvr += best_mv.row; | 
|  | stats->sum_mvr_abs += abs(best_mv.row); | 
|  | stats->sum_mvc += best_mv.col; | 
|  | stats->sum_mvc_abs += abs(best_mv.col); | 
|  | stats->sum_mvrs += best_mv.row * best_mv.row; | 
|  | stats->sum_mvcs += best_mv.col * best_mv.col; | 
|  | ++stats->inter_count; | 
|  |  | 
|  | *best_ref_mv = best_mv; | 
|  | accumulate_mv_stats(best_mv, mv, mb_row, mb_col, mi_params->mb_rows, | 
|  | mi_params->mb_cols, last_mv, stats); | 
|  | } | 
|  |  | 
|  | return this_inter_error; | 
|  | } | 
|  |  | 
|  | // Updates the first pass stats of this frame. | 
|  | // Input: | 
|  | //   cpi: the encoder setting. Only a few params in it will be used. | 
|  | //   stats: stats accumulated for this frame. | 
|  | //   raw_err_stdev: the statndard deviation for the motion error of all the | 
|  | //                  inter blocks of the (0,0) motion using the last source | 
|  | //                  frame as the reference. | 
|  | //   frame_number: current frame number. | 
|  | //   ts_duration: Duration of the frame / collection of frames. | 
|  | // Updates: | 
|  | //   twopass->total_stats: the accumulated stats. | 
|  | //   twopass->stats_buf_ctx->stats_in_end: the pointer to the current stats, | 
|  | //                                         update its value and its position | 
|  | //                                         in the buffer. | 
|  | static void update_firstpass_stats(AV1_COMP *cpi, | 
|  | const FRAME_STATS *const stats, | 
|  | const double raw_err_stdev, | 
|  | const int frame_number, | 
|  | const int64_t ts_duration) { | 
|  | TWO_PASS *twopass = &cpi->twopass; | 
|  | AV1_COMMON *const cm = &cpi->common; | 
|  | const CommonModeInfoParams *const mi_params = &cm->mi_params; | 
|  | FIRSTPASS_STATS *this_frame_stats = twopass->stats_buf_ctx->stats_in_end; | 
|  | FIRSTPASS_STATS fps; | 
|  | // The minimum error here insures some bit allocation to frames even | 
|  | // in static regions. The allocation per MB declines for larger formats | 
|  | // where the typical "real" energy per MB also falls. | 
|  | // Initial estimate here uses sqrt(mbs) to define the min_err, where the | 
|  | // number of mbs is proportional to the image area. | 
|  | const int num_mbs = (cpi->oxcf.resize_cfg.resize_mode != RESIZE_NONE) | 
|  | ? cpi->initial_mbs | 
|  | : mi_params->MBs; | 
|  | const double min_err = 200 * sqrt(num_mbs); | 
|  |  | 
|  | fps.weight = stats->intra_factor * stats->brightness_factor; | 
|  | fps.frame = frame_number; | 
|  | fps.coded_error = (double)(stats->coded_error >> 8) + min_err; | 
|  | fps.sr_coded_error = (double)(stats->sr_coded_error >> 8) + min_err; | 
|  | fps.tr_coded_error = (double)(stats->tr_coded_error >> 8) + min_err; | 
|  | fps.intra_error = (double)(stats->intra_error >> 8) + min_err; | 
|  | fps.frame_avg_wavelet_energy = (double)stats->frame_avg_wavelet_energy; | 
|  | fps.count = 1.0; | 
|  | fps.pcnt_inter = (double)stats->inter_count / num_mbs; | 
|  | fps.pcnt_second_ref = (double)stats->second_ref_count / num_mbs; | 
|  | fps.pcnt_third_ref = (double)stats->third_ref_count / num_mbs; | 
|  | fps.pcnt_neutral = (double)stats->neutral_count / num_mbs; | 
|  | fps.intra_skip_pct = (double)stats->intra_skip_count / num_mbs; | 
|  | fps.inactive_zone_rows = (double)stats->image_data_start_row; | 
|  | fps.inactive_zone_cols = (double)0;  // TODO(paulwilkins): fix | 
|  | fps.raw_error_stdev = raw_err_stdev; | 
|  |  | 
|  | if (stats->mv_count > 0) { | 
|  | fps.MVr = (double)stats->sum_mvr / stats->mv_count; | 
|  | fps.mvr_abs = (double)stats->sum_mvr_abs / stats->mv_count; | 
|  | fps.MVc = (double)stats->sum_mvc / stats->mv_count; | 
|  | fps.mvc_abs = (double)stats->sum_mvc_abs / stats->mv_count; | 
|  | fps.MVrv = ((double)stats->sum_mvrs - | 
|  | ((double)stats->sum_mvr * stats->sum_mvr / stats->mv_count)) / | 
|  | stats->mv_count; | 
|  | fps.MVcv = ((double)stats->sum_mvcs - | 
|  | ((double)stats->sum_mvc * stats->sum_mvc / stats->mv_count)) / | 
|  | stats->mv_count; | 
|  | fps.mv_in_out_count = (double)stats->sum_in_vectors / (stats->mv_count * 2); | 
|  | fps.new_mv_count = stats->new_mv_count; | 
|  | fps.pcnt_motion = (double)stats->mv_count / num_mbs; | 
|  | } else { | 
|  | fps.MVr = 0.0; | 
|  | fps.mvr_abs = 0.0; | 
|  | fps.MVc = 0.0; | 
|  | fps.mvc_abs = 0.0; | 
|  | fps.MVrv = 0.0; | 
|  | fps.MVcv = 0.0; | 
|  | fps.mv_in_out_count = 0.0; | 
|  | fps.new_mv_count = 0.0; | 
|  | fps.pcnt_motion = 0.0; | 
|  | } | 
|  |  | 
|  | // TODO(paulwilkins):  Handle the case when duration is set to 0, or | 
|  | // something less than the full time between subsequent values of | 
|  | // cpi->source_time_stamp. | 
|  | fps.duration = (double)ts_duration; | 
|  |  | 
|  | // We will store the stats inside the persistent twopass struct (and NOT the | 
|  | // local variable 'fps'), and then cpi->output_pkt_list will point to it. | 
|  | *this_frame_stats = fps; | 
|  | output_stats(this_frame_stats, cpi->output_pkt_list); | 
|  | if (cpi->twopass.stats_buf_ctx->total_stats != NULL) { | 
|  | av1_accumulate_stats(cpi->twopass.stats_buf_ctx->total_stats, &fps); | 
|  | } | 
|  | /*In the case of two pass, first pass uses it as a circular buffer, | 
|  | * when LAP is enabled it is used as a linear buffer*/ | 
|  | twopass->stats_buf_ctx->stats_in_end++; | 
|  | if ((cpi->oxcf.pass == 1) && (twopass->stats_buf_ctx->stats_in_end >= | 
|  | twopass->stats_buf_ctx->stats_in_buf_end)) { | 
|  | twopass->stats_buf_ctx->stats_in_end = | 
|  | twopass->stats_buf_ctx->stats_in_start; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void print_reconstruction_frame( | 
|  | const YV12_BUFFER_CONFIG *const last_frame, int frame_number, | 
|  | int do_print) { | 
|  | if (!do_print) return; | 
|  |  | 
|  | char filename[512]; | 
|  | FILE *recon_file; | 
|  | snprintf(filename, sizeof(filename), "enc%04d.yuv", frame_number); | 
|  |  | 
|  | if (frame_number == 0) { | 
|  | recon_file = fopen(filename, "wb"); | 
|  | } else { | 
|  | recon_file = fopen(filename, "ab"); | 
|  | } | 
|  |  | 
|  | fwrite(last_frame->buffer_alloc, last_frame->frame_size, 1, recon_file); | 
|  | fclose(recon_file); | 
|  | } | 
|  |  | 
|  | static FRAME_STATS accumulate_frame_stats(FRAME_STATS *mb_stats, int mb_rows, | 
|  | int mb_cols) { | 
|  | FRAME_STATS stats = { 0 }; | 
|  | int i, j; | 
|  |  | 
|  | stats.image_data_start_row = INVALID_ROW; | 
|  | for (j = 0; j < mb_rows; j++) { | 
|  | for (i = 0; i < mb_cols; i++) { | 
|  | FRAME_STATS mb_stat = mb_stats[j * mb_cols + i]; | 
|  | stats.brightness_factor += mb_stat.brightness_factor; | 
|  | stats.coded_error += mb_stat.coded_error; | 
|  | stats.frame_avg_wavelet_energy += mb_stat.frame_avg_wavelet_energy; | 
|  | if (stats.image_data_start_row == INVALID_ROW && | 
|  | mb_stat.image_data_start_row != INVALID_ROW) { | 
|  | stats.image_data_start_row = mb_stat.image_data_start_row; | 
|  | } | 
|  | stats.inter_count += mb_stat.inter_count; | 
|  | stats.intra_error += mb_stat.intra_error; | 
|  | stats.intra_factor += mb_stat.intra_factor; | 
|  | stats.intra_skip_count += mb_stat.intra_skip_count; | 
|  | stats.mv_count += mb_stat.mv_count; | 
|  | stats.neutral_count += mb_stat.neutral_count; | 
|  | stats.new_mv_count += mb_stat.new_mv_count; | 
|  | stats.second_ref_count += mb_stat.second_ref_count; | 
|  | stats.sr_coded_error += mb_stat.sr_coded_error; | 
|  | stats.sum_in_vectors += mb_stat.sum_in_vectors; | 
|  | stats.sum_mvc += mb_stat.sum_mvc; | 
|  | stats.sum_mvc_abs += mb_stat.sum_mvc_abs; | 
|  | stats.sum_mvcs += mb_stat.sum_mvcs; | 
|  | stats.sum_mvr += mb_stat.sum_mvr; | 
|  | stats.sum_mvr_abs += mb_stat.sum_mvr_abs; | 
|  | stats.sum_mvrs += mb_stat.sum_mvrs; | 
|  | stats.third_ref_count += mb_stat.third_ref_count; | 
|  | stats.tr_coded_error += mb_stat.tr_coded_error; | 
|  | } | 
|  | } | 
|  | return stats; | 
|  | } | 
|  |  | 
|  | static void setup_firstpass_data(AV1_COMMON *const cm, | 
|  | FirstPassData *firstpass_data) { | 
|  | const CommonModeInfoParams *const mi_params = &cm->mi_params; | 
|  | CHECK_MEM_ERROR(cm, firstpass_data->raw_motion_err_list, | 
|  | aom_calloc(mi_params->mb_rows * mi_params->mb_cols, | 
|  | sizeof(*firstpass_data->raw_motion_err_list))); | 
|  | CHECK_MEM_ERROR(cm, firstpass_data->mb_stats, | 
|  | aom_calloc(mi_params->mb_rows * mi_params->mb_cols, | 
|  | sizeof(*firstpass_data->mb_stats))); | 
|  | for (int j = 0; j < mi_params->mb_rows; j++) { | 
|  | for (int i = 0; i < mi_params->mb_cols; i++) { | 
|  | firstpass_data->mb_stats[j * mi_params->mb_cols + i] | 
|  | .image_data_start_row = INVALID_ROW; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void free_firstpass_data(FirstPassData *firstpass_data) { | 
|  | aom_free(firstpass_data->raw_motion_err_list); | 
|  | aom_free(firstpass_data->mb_stats); | 
|  | } | 
|  |  | 
|  | int av1_get_mb_rows_in_tile(TileInfo tile) { | 
|  | int mi_rows_aligned_to_mb = | 
|  | ALIGN_POWER_OF_TWO(tile.mi_row_end - tile.mi_row_start, FP_MIB_SIZE_LOG2); | 
|  | int mb_rows = mi_rows_aligned_to_mb >> FP_MIB_SIZE_LOG2; | 
|  |  | 
|  | return mb_rows; | 
|  | } | 
|  |  | 
|  | int av1_get_mb_cols_in_tile(TileInfo tile) { | 
|  | int mi_cols_aligned_to_mb = | 
|  | ALIGN_POWER_OF_TWO(tile.mi_col_end - tile.mi_col_start, FP_MIB_SIZE_LOG2); | 
|  | int mb_cols = mi_cols_aligned_to_mb >> FP_MIB_SIZE_LOG2; | 
|  |  | 
|  | return mb_cols; | 
|  | } | 
|  |  | 
|  | #define FIRST_PASS_ALT_REF_DISTANCE 16 | 
|  | static void first_pass_tile(AV1_COMP *cpi, ThreadData *td, | 
|  | TileDataEnc *tile_data) { | 
|  | TileInfo *tile = &tile_data->tile_info; | 
|  | for (int mi_row = tile->mi_row_start; mi_row < tile->mi_row_end; | 
|  | mi_row += FP_MIB_SIZE) { | 
|  | av1_first_pass_row(cpi, td, tile_data, mi_row >> FP_MIB_SIZE_LOG2); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void first_pass_tiles(AV1_COMP *cpi) { | 
|  | AV1_COMMON *const cm = &cpi->common; | 
|  | const int tile_cols = cm->tiles.cols; | 
|  | const int tile_rows = cm->tiles.rows; | 
|  | for (int tile_row = 0; tile_row < tile_rows; ++tile_row) { | 
|  | for (int tile_col = 0; tile_col < tile_cols; ++tile_col) { | 
|  | TileDataEnc *const tile_data = | 
|  | &cpi->tile_data[tile_row * tile_cols + tile_col]; | 
|  | first_pass_tile(cpi, &cpi->td, tile_data); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | #define LAST_FRAME_PROXY 0 | 
|  | #define GOLDEN_FRAME_PROXY 2  // Any proxy index will do | 
|  | #endif                        // CONFIG_NEW_REF_SIGNALING | 
|  |  | 
|  | void av1_first_pass_row(AV1_COMP *cpi, ThreadData *td, TileDataEnc *tile_data, | 
|  | int mb_row) { | 
|  | MACROBLOCK *const x = &td->mb; | 
|  | AV1_COMMON *const cm = &cpi->common; | 
|  | const CommonModeInfoParams *const mi_params = &cm->mi_params; | 
|  | CurrentFrame *const current_frame = &cm->current_frame; | 
|  | const SequenceHeader *const seq_params = &cm->seq_params; | 
|  | const int num_planes = av1_num_planes(cm); | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | TileInfo *tile = &tile_data->tile_info; | 
|  | const int qindex = find_fp_qindex(seq_params->bit_depth); | 
|  | // First pass coding proceeds in raster scan order with unit size of 16x16. | 
|  | const BLOCK_SIZE fp_block_size = BLOCK_16X16; | 
|  | const int fp_block_size_width = block_size_high[fp_block_size]; | 
|  | const int fp_block_size_height = block_size_wide[fp_block_size]; | 
|  | int raw_motion_err_counts = 0; | 
|  | int mb_row_in_tile = mb_row - (tile->mi_row_start >> FP_MIB_SIZE_LOG2); | 
|  | int mb_col_start = tile->mi_col_start >> FP_MIB_SIZE_LOG2; | 
|  | int mb_cols_in_tile = av1_get_mb_cols_in_tile(*tile); | 
|  | MultiThreadInfo *const mt_info = &cpi->mt_info; | 
|  | AV1EncRowMultiThreadInfo *const enc_row_mt = &mt_info->enc_row_mt; | 
|  | AV1EncRowMultiThreadSync *const row_mt_sync = &tile_data->row_mt_sync; | 
|  |  | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | const YV12_BUFFER_CONFIG *const last_frame = | 
|  | get_ref_frame_yv12_buf(cm, LAST_FRAME_PROXY); | 
|  | const YV12_BUFFER_CONFIG *golden_frame = | 
|  | get_ref_frame_yv12_buf(cm, GOLDEN_FRAME_PROXY); | 
|  | #else | 
|  | const YV12_BUFFER_CONFIG *const last_frame = | 
|  | get_ref_frame_yv12_buf(cm, LAST_FRAME); | 
|  | const YV12_BUFFER_CONFIG *golden_frame = | 
|  | get_ref_frame_yv12_buf(cm, GOLDEN_FRAME); | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  | const YV12_BUFFER_CONFIG *alt_ref_frame = NULL; | 
|  | const int alt_ref_offset = | 
|  | FIRST_PASS_ALT_REF_DISTANCE - | 
|  | (current_frame->frame_number % FIRST_PASS_ALT_REF_DISTANCE); | 
|  | if (alt_ref_offset < FIRST_PASS_ALT_REF_DISTANCE) { | 
|  | const struct lookahead_entry *const alt_ref_frame_buffer = | 
|  | av1_lookahead_peek(cpi->lookahead, alt_ref_offset, | 
|  | cpi->compressor_stage); | 
|  | if (alt_ref_frame_buffer != NULL) { | 
|  | alt_ref_frame = &alt_ref_frame_buffer->img; | 
|  | } | 
|  | } | 
|  | YV12_BUFFER_CONFIG *const this_frame = &cm->cur_frame->buf; | 
|  |  | 
|  | PICK_MODE_CONTEXT *ctx = td->firstpass_ctx; | 
|  | FRAME_STATS *mb_stats = | 
|  | cpi->firstpass_data.mb_stats + mb_row * mi_params->mb_cols + mb_col_start; | 
|  | int *raw_motion_err_list = cpi->firstpass_data.raw_motion_err_list + | 
|  | mb_row * mi_params->mb_cols + mb_col_start; | 
|  | MV *first_top_mv = &tile_data->firstpass_top_mv; | 
|  |  | 
|  | for (int i = 0; i < num_planes; ++i) { | 
|  | x->plane[i].coeff = ctx->coeff[i]; | 
|  | x->plane[i].qcoeff = ctx->qcoeff[i]; | 
|  | x->plane[i].eobs = ctx->eobs[i]; | 
|  | x->plane[i].txb_entropy_ctx = ctx->txb_entropy_ctx[i]; | 
|  | x->plane[i].dqcoeff = ctx->dqcoeff[i]; | 
|  | } | 
|  |  | 
|  | const int src_y_stride = cpi->source->y_stride; | 
|  | const int recon_y_stride = this_frame->y_stride; | 
|  | const int recon_uv_stride = this_frame->uv_stride; | 
|  | const int uv_mb_height = | 
|  | fp_block_size_height >> (this_frame->y_height > this_frame->uv_height); | 
|  |  | 
|  | MV best_ref_mv = kZeroMv; | 
|  | MV last_mv = { 0, 0 }; | 
|  |  | 
|  | // Reset above block coeffs. | 
|  | xd->up_available = (mb_row_in_tile != 0); | 
|  | int recon_yoffset = (mb_row * recon_y_stride * fp_block_size_height) + | 
|  | (mb_col_start * fp_block_size_width); | 
|  | int src_yoffset = (mb_row * src_y_stride * fp_block_size_height) + | 
|  | (mb_col_start * fp_block_size_width); | 
|  | int recon_uvoffset = | 
|  | (mb_row * recon_uv_stride * uv_mb_height) + (mb_col_start * uv_mb_height); | 
|  | int alt_ref_frame_yoffset = | 
|  | (alt_ref_frame != NULL) | 
|  | ? (mb_row * alt_ref_frame->y_stride * fp_block_size_height) + | 
|  | (mb_col_start * fp_block_size_width) | 
|  | : -1; | 
|  |  | 
|  | // Set up limit values for motion vectors to prevent them extending | 
|  | // outside the UMV borders. | 
|  | av1_set_mv_row_limits(mi_params, &x->mv_limits, (mb_row << FP_MIB_SIZE_LOG2), | 
|  | (fp_block_size_height >> MI_SIZE_LOG2), | 
|  | cpi->oxcf.border_in_pixels); | 
|  |  | 
|  | av1_setup_src_planes(x, cpi->source, mb_row << FP_MIB_SIZE_LOG2, | 
|  | tile->mi_col_start, num_planes, fp_block_size); | 
|  |  | 
|  | // Fix - zero the 16x16 block first. This ensures correct this_intra_error for | 
|  | // block sizes smaller than 16x16. | 
|  | av1_zero_array(x->plane[0].src_diff, 256); | 
|  |  | 
|  | for (int mi_col = tile->mi_col_start; mi_col < tile->mi_col_end; | 
|  | mi_col += FP_MIB_SIZE) { | 
|  | int mb_col = mi_col >> FP_MIB_SIZE_LOG2; | 
|  | int mb_col_in_tile = mb_col - mb_col_start; | 
|  |  | 
|  | (*(enc_row_mt->sync_read_ptr))(row_mt_sync, mb_row_in_tile, mb_col_in_tile); | 
|  |  | 
|  | if (mb_col_in_tile == 0) { | 
|  | last_mv = *first_top_mv; | 
|  | } | 
|  | int this_intra_error = firstpass_intra_prediction( | 
|  | cpi, td, this_frame, tile, mb_row, mb_col, recon_yoffset, | 
|  | recon_uvoffset, fp_block_size, qindex, mb_stats); | 
|  |  | 
|  | if (!frame_is_intra_only(cm)) { | 
|  | const int this_inter_error = firstpass_inter_prediction( | 
|  | cpi, td, last_frame, golden_frame, alt_ref_frame, mb_row, mb_col, | 
|  | recon_yoffset, recon_uvoffset, src_yoffset, alt_ref_frame_yoffset, | 
|  | fp_block_size, this_intra_error, raw_motion_err_counts, | 
|  | raw_motion_err_list, &best_ref_mv, &last_mv, mb_stats); | 
|  | if (mb_col_in_tile == 0) { | 
|  | *first_top_mv = last_mv; | 
|  | } | 
|  | mb_stats->coded_error += this_inter_error; | 
|  | ++raw_motion_err_counts; | 
|  | } else { | 
|  | mb_stats->sr_coded_error += this_intra_error; | 
|  | mb_stats->tr_coded_error += this_intra_error; | 
|  | mb_stats->coded_error += this_intra_error; | 
|  | } | 
|  |  | 
|  | // Adjust to the next column of MBs. | 
|  | x->plane[0].src.buf += fp_block_size_width; | 
|  | x->plane[1].src.buf += uv_mb_height; | 
|  | x->plane[2].src.buf += uv_mb_height; | 
|  |  | 
|  | recon_yoffset += fp_block_size_width; | 
|  | src_yoffset += fp_block_size_width; | 
|  | recon_uvoffset += uv_mb_height; | 
|  | alt_ref_frame_yoffset += fp_block_size_width; | 
|  | mb_stats++; | 
|  |  | 
|  | (*(enc_row_mt->sync_write_ptr))(row_mt_sync, mb_row_in_tile, mb_col_in_tile, | 
|  | mb_cols_in_tile); | 
|  | } | 
|  | } | 
|  |  | 
|  | void av1_first_pass(AV1_COMP *cpi, const int64_t ts_duration) { | 
|  | MACROBLOCK *const x = &cpi->td.mb; | 
|  | AV1_COMMON *const cm = &cpi->common; | 
|  | const CommonModeInfoParams *const mi_params = &cm->mi_params; | 
|  | CurrentFrame *const current_frame = &cm->current_frame; | 
|  | const SequenceHeader *const seq_params = &cm->seq_params; | 
|  | const int num_planes = av1_num_planes(cm); | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | const int qindex = find_fp_qindex(seq_params->bit_depth); | 
|  | // Detect if the key frame is screen content type. | 
|  | if (frame_is_intra_only(cm)) { | 
|  | FeatureFlags *const features = &cm->features; | 
|  | av1_set_screen_content_options(cpi, features); | 
|  | cpi->is_screen_content_type = features->allow_screen_content_tools; | 
|  | } | 
|  | // First pass coding proceeds in raster scan order with unit size of 16x16. | 
|  | const BLOCK_SIZE fp_block_size = BLOCK_16X16; | 
|  |  | 
|  | setup_firstpass_data(cm, &cpi->firstpass_data); | 
|  | int *raw_motion_err_list = cpi->firstpass_data.raw_motion_err_list; | 
|  | FRAME_STATS *mb_stats = cpi->firstpass_data.mb_stats; | 
|  |  | 
|  | // multi threading info | 
|  | MultiThreadInfo *const mt_info = &cpi->mt_info; | 
|  | AV1EncRowMultiThreadInfo *const enc_row_mt = &mt_info->enc_row_mt; | 
|  |  | 
|  | const int tile_cols = cm->tiles.cols; | 
|  | const int tile_rows = cm->tiles.rows; | 
|  | if (cpi->allocated_tiles < tile_cols * tile_rows) { | 
|  | av1_row_mt_mem_dealloc(cpi); | 
|  | av1_alloc_tile_data(cpi); | 
|  | } | 
|  |  | 
|  | av1_init_tile_data(cpi); | 
|  |  | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | const YV12_BUFFER_CONFIG *const last_frame = | 
|  | get_ref_frame_yv12_buf(cm, LAST_FRAME_PROXY); | 
|  | const YV12_BUFFER_CONFIG *golden_frame = | 
|  | get_ref_frame_yv12_buf(cm, GOLDEN_FRAME_PROXY); | 
|  | #else | 
|  | const YV12_BUFFER_CONFIG *const last_frame = | 
|  | get_ref_frame_yv12_buf(cm, LAST_FRAME); | 
|  | const YV12_BUFFER_CONFIG *golden_frame = | 
|  | get_ref_frame_yv12_buf(cm, GOLDEN_FRAME); | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  | YV12_BUFFER_CONFIG *const this_frame = &cm->cur_frame->buf; | 
|  | // First pass code requires valid last and new frame buffers. | 
|  | assert(this_frame != NULL); | 
|  | assert(frame_is_intra_only(cm) || (last_frame != NULL)); | 
|  |  | 
|  | av1_setup_frame_size(cpi); | 
|  | aom_clear_system_state(); | 
|  |  | 
|  | set_mi_offsets(mi_params, xd, 0, 0); | 
|  | #if CONFIG_SDP | 
|  | xd->mi[0]->sb_type[PLANE_TYPE_Y] = fp_block_size; | 
|  | xd->mi[0]->sb_type[PLANE_TYPE_UV] = fp_block_size; | 
|  | #else | 
|  | xd->mi[0]->sb_type = fp_block_size; | 
|  | #endif | 
|  |  | 
|  | // Do not use periodic key frames. | 
|  | cpi->rc.frames_to_key = INT_MAX; | 
|  |  | 
|  | av1_set_quantizer(cm, cpi->oxcf.q_cfg.qm_minlevel, | 
|  | cpi->oxcf.q_cfg.qm_maxlevel, qindex, | 
|  | cpi->oxcf.q_cfg.enable_chroma_deltaq); | 
|  |  | 
|  | av1_setup_block_planes(xd, seq_params->subsampling_x, | 
|  | seq_params->subsampling_y, num_planes); | 
|  |  | 
|  | av1_setup_src_planes(x, cpi->source, 0, 0, num_planes, fp_block_size); | 
|  | av1_setup_dst_planes(xd->plane, seq_params->sb_size, this_frame, 0, 0, 0, | 
|  | num_planes); | 
|  |  | 
|  | if (!frame_is_intra_only(cm)) { | 
|  | av1_setup_pre_planes(xd, 0, last_frame, 0, 0, NULL, num_planes); | 
|  | } | 
|  |  | 
|  | set_mi_offsets(mi_params, xd, 0, 0); | 
|  |  | 
|  | // Don't store luma on the fist pass since chroma is not computed | 
|  | xd->cfl.store_y = 0; | 
|  | av1_frame_init_quantizer(cpi); | 
|  |  | 
|  | av1_init_mv_probs(cm); | 
|  | av1_initialize_rd_consts(cpi); | 
|  |  | 
|  | enc_row_mt->sync_read_ptr = av1_row_mt_sync_read_dummy; | 
|  | enc_row_mt->sync_write_ptr = av1_row_mt_sync_write_dummy; | 
|  |  | 
|  | if (mt_info->num_workers > 1) { | 
|  | enc_row_mt->sync_read_ptr = av1_row_mt_sync_read; | 
|  | enc_row_mt->sync_write_ptr = av1_row_mt_sync_write; | 
|  | av1_fp_encode_tiles_row_mt(cpi); | 
|  | } else { | 
|  | first_pass_tiles(cpi); | 
|  | } | 
|  |  | 
|  | FRAME_STATS stats = | 
|  | accumulate_frame_stats(mb_stats, mi_params->mb_rows, mi_params->mb_cols); | 
|  | int total_raw_motion_err_count = | 
|  | frame_is_intra_only(cm) ? 0 : mi_params->mb_rows * mi_params->mb_cols; | 
|  | const double raw_err_stdev = | 
|  | raw_motion_error_stdev(raw_motion_err_list, total_raw_motion_err_count); | 
|  | free_firstpass_data(&cpi->firstpass_data); | 
|  |  | 
|  | // Clamp the image start to rows/2. This number of rows is discarded top | 
|  | // and bottom as dead data so rows / 2 means the frame is blank. | 
|  | if ((stats.image_data_start_row > mi_params->mb_rows / 2) || | 
|  | (stats.image_data_start_row == INVALID_ROW)) { | 
|  | stats.image_data_start_row = mi_params->mb_rows / 2; | 
|  | } | 
|  | // Exclude any image dead zone | 
|  | if (stats.image_data_start_row > 0) { | 
|  | stats.intra_skip_count = | 
|  | AOMMAX(0, stats.intra_skip_count - | 
|  | (stats.image_data_start_row * mi_params->mb_cols * 2)); | 
|  | } | 
|  |  | 
|  | TWO_PASS *twopass = &cpi->twopass; | 
|  | const int num_mbs = (cpi->oxcf.resize_cfg.resize_mode != RESIZE_NONE) | 
|  | ? cpi->initial_mbs | 
|  | : mi_params->MBs; | 
|  | stats.intra_factor = stats.intra_factor / (double)num_mbs; | 
|  | stats.brightness_factor = stats.brightness_factor / (double)num_mbs; | 
|  | FIRSTPASS_STATS *this_frame_stats = twopass->stats_buf_ctx->stats_in_end; | 
|  | update_firstpass_stats(cpi, &stats, raw_err_stdev, | 
|  | current_frame->frame_number, ts_duration); | 
|  |  | 
|  | // Copy the previous Last Frame back into gf buffer if the prediction is good | 
|  | // enough... but also don't allow it to lag too far. | 
|  | if ((twopass->sr_update_lag > 3) || | 
|  | ((current_frame->frame_number > 0) && | 
|  | (this_frame_stats->pcnt_inter > 0.20) && | 
|  | ((this_frame_stats->intra_error / | 
|  | DOUBLE_DIVIDE_CHECK(this_frame_stats->coded_error)) > 2.0))) { | 
|  | if (golden_frame != NULL) { | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | assign_frame_buffer_p( | 
|  | &cm->ref_frame_map[get_ref_frame_map_idx(cm, GOLDEN_FRAME_PROXY)], | 
|  | cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME_PROXY)]); | 
|  | #else | 
|  | assign_frame_buffer_p( | 
|  | &cm->ref_frame_map[get_ref_frame_map_idx(cm, GOLDEN_FRAME)], | 
|  | cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME)]); | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  | } | 
|  | twopass->sr_update_lag = 1; | 
|  | } else { | 
|  | ++twopass->sr_update_lag; | 
|  | } | 
|  |  | 
|  | aom_extend_frame_borders(this_frame, num_planes); | 
|  |  | 
|  | // The frame we just compressed now becomes the last frame. | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | assign_frame_buffer_p( | 
|  | &cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME_PROXY)], | 
|  | cm->cur_frame); | 
|  | #else | 
|  | assign_frame_buffer_p( | 
|  | &cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME)], cm->cur_frame); | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  |  | 
|  | // Special case for the first frame. Copy into the GF buffer as a second | 
|  | // reference. | 
|  | #if CONFIG_NEW_REF_SIGNALING | 
|  | if (current_frame->frame_number == 0 && | 
|  | get_ref_frame_map_idx(cm, GOLDEN_FRAME_PROXY) != INVALID_IDX) { | 
|  | assign_frame_buffer_p( | 
|  | &cm->ref_frame_map[get_ref_frame_map_idx(cm, GOLDEN_FRAME_PROXY)], | 
|  | cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME_PROXY)]); | 
|  | } | 
|  | #else | 
|  | if (current_frame->frame_number == 0 && | 
|  | get_ref_frame_map_idx(cm, GOLDEN_FRAME) != INVALID_IDX) { | 
|  | assign_frame_buffer_p( | 
|  | &cm->ref_frame_map[get_ref_frame_map_idx(cm, GOLDEN_FRAME)], | 
|  | cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME)]); | 
|  | } | 
|  | #endif  // CONFIG_NEW_REF_SIGNALING | 
|  |  | 
|  | print_reconstruction_frame(last_frame, current_frame->frame_number, | 
|  | /*do_print=*/0); | 
|  |  | 
|  | ++current_frame->frame_number; | 
|  | } |