| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 3-Clause Clear License |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear |
| * License was not distributed with this source code in the LICENSE file, you |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the |
| * Alliance for Open Media Patent License 1.0 was not distributed with this |
| * source code in the PATENTS file, you can obtain it at |
| * aomedia.org/license/patent-license/. |
| */ |
| |
| #ifndef AOM_AV1_ENCODER_SPEED_FEATURES_H_ |
| #define AOM_AV1_ENCODER_SPEED_FEATURES_H_ |
| |
| #include "av1/common/enums.h" |
| #include "av1/encoder/enc_enums.h" |
| #include "av1/encoder/mcomp.h" |
| #include "av1/encoder/encodemb.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /*! @file */ |
| |
| /*!\cond */ |
| #define MAX_MESH_STEP 4 |
| |
| typedef struct MESH_PATTERN { |
| int range; |
| int interval; |
| } MESH_PATTERN; |
| |
| enum { |
| GM_FULL_SEARCH, |
| #if CONFIG_NEW_REF_SIGNALING |
| GM_REDUCED_REF_SEARCH_SKIP_LEV2, |
| GM_REDUCED_REF_SEARCH_SKIP_LEV3, |
| #else |
| GM_REDUCED_REF_SEARCH_SKIP_L2_L3, |
| GM_REDUCED_REF_SEARCH_SKIP_L2_L3_ARF2, |
| #endif // CONFIG_NEW_REF_SIGNALING |
| GM_DISABLE_SEARCH |
| } UENUM1BYTE(GM_SEARCH_TYPE); |
| |
| enum { |
| INTRA_ALL = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED) | (1 << D45_PRED) | |
| (1 << D135_PRED) | (1 << D113_PRED) | (1 << D157_PRED) | |
| (1 << D203_PRED) | (1 << D67_PRED) | (1 << SMOOTH_PRED) | |
| (1 << SMOOTH_V_PRED) | (1 << SMOOTH_H_PRED) | (1 << PAETH_PRED), |
| UV_INTRA_ALL = |
| (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) | |
| (1 << UV_D45_PRED) | (1 << UV_D135_PRED) | (1 << UV_D113_PRED) | |
| (1 << UV_D157_PRED) | (1 << UV_D203_PRED) | (1 << UV_D67_PRED) | |
| (1 << UV_SMOOTH_PRED) | (1 << UV_SMOOTH_V_PRED) | |
| (1 << UV_SMOOTH_H_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC = (1 << UV_DC_PRED), |
| UV_INTRA_DC_CFL = (1 << UV_DC_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC_TM = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED), |
| UV_INTRA_DC_PAETH_CFL = |
| (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC_H_V = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED), |
| UV_INTRA_DC_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | |
| (1 << UV_H_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC_PAETH_H_V = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | |
| (1 << UV_V_PRED) | (1 << UV_H_PRED), |
| UV_INTRA_DC_PAETH_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | |
| (1 << UV_V_PRED) | (1 << UV_H_PRED) | |
| (1 << UV_CFL_PRED), |
| INTRA_DC = (1 << DC_PRED), |
| INTRA_DC_TM = (1 << DC_PRED) | (1 << PAETH_PRED), |
| INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED), |
| INTRA_DC_PAETH_H_V = |
| (1 << DC_PRED) | (1 << PAETH_PRED) | (1 << V_PRED) | (1 << H_PRED) |
| }; |
| |
| #if CONFIG_NEW_INTER_MODES |
| enum { |
| INTER_ALL = (1 << NEARMV) | (1 << GLOBALMV) | (1 << NEWMV) | |
| (1 << NEAR_NEARMV) | (1 << NEW_NEWMV) | (1 << NEAR_NEWMV) | |
| (1 << NEW_NEARMV) | (1 << GLOBAL_GLOBALMV), |
| INTER_NEAREST_NEAR_ZERO = (1 << NEARMV) | (1 << GLOBALMV) | |
| (1 << GLOBAL_GLOBALMV) | (1 << NEW_NEARMV) | |
| (1 << NEAR_NEWMV) | (1 << NEAR_NEARMV), |
| }; |
| #else |
| enum { |
| INTER_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | |
| (1 << NEWMV) | (1 << NEAREST_NEARESTMV) | (1 << NEAR_NEARMV) | |
| (1 << NEW_NEWMV) | (1 << NEAREST_NEWMV) | (1 << NEAR_NEWMV) | |
| (1 << NEW_NEARMV) | (1 << NEW_NEARESTMV) | (1 << GLOBAL_GLOBALMV), |
| INTER_NEAREST_NEAR_ZERO = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | |
| (1 << NEAREST_NEARESTMV) | (1 << GLOBAL_GLOBALMV) | |
| (1 << NEAREST_NEWMV) | (1 << NEW_NEARESTMV) | |
| (1 << NEW_NEARMV) | (1 << NEAR_NEWMV) | |
| (1 << NEAR_NEARMV), |
| }; |
| #endif // CONFIG_NEW_INTER_MODES |
| |
| #if !CONFIG_NEW_REF_SIGNALING |
| enum { |
| DISABLE_ALL_INTER_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA) | |
| (1 << THR_ALTR) | (1 << THR_GOLD) | (1 << THR_LAST), |
| |
| DISABLE_ALL_SPLIT = (1 << THR_INTRA) | DISABLE_ALL_INTER_SPLIT, |
| |
| DISABLE_COMPOUND_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA), |
| |
| LAST_AND_INTRA_SPLIT_ONLY = (1 << THR_COMP_GA) | (1 << THR_COMP_LA) | |
| (1 << THR_ALTR) | (1 << THR_GOLD) |
| }; |
| #endif // !CONFIG_NEW_REF_SIGNALING |
| |
| enum { |
| TXFM_CODING_SF = 1, |
| INTER_PRED_SF = 2, |
| INTRA_PRED_SF = 4, |
| PARTITION_SF = 8, |
| LOOP_FILTER_SF = 16, |
| RD_SKIP_SF = 32, |
| RESERVE_2_SF = 64, |
| RESERVE_3_SF = 128, |
| } UENUM1BYTE(DEV_SPEED_FEATURES); |
| |
| /* This enumeration defines when the rate control recode loop will be |
| * enabled. |
| */ |
| enum { |
| /* |
| * No recodes allowed |
| */ |
| DISALLOW_RECODE = 0, |
| /* |
| * Recode KF's exceeding maximum frame bandwidth |
| */ |
| ALLOW_RECODE_KFMAXBW = 1, |
| /* |
| * Allow recode only for KF/ARF/GF frames |
| */ |
| ALLOW_RECODE_KFARFGF = 2, |
| /* |
| * Allow recode for all frame types based on bitrate constraints. |
| */ |
| ALLOW_RECODE = 3, |
| } UENUM1BYTE(RECODE_LOOP_TYPE); |
| |
| enum { |
| SUBPEL_TREE = 0, |
| SUBPEL_TREE_PRUNED = 1, // Prunes 1/2-pel searches |
| SUBPEL_TREE_PRUNED_MORE = 2, // Prunes 1/2-pel searches more aggressively |
| SUBPEL_TREE_PRUNED_EVENMORE = 3, // Prunes 1/2- and 1/4-pel searches |
| // Other methods to come |
| } UENUM1BYTE(SUBPEL_SEARCH_METHODS); |
| |
| enum { |
| // Try the full image with different values. |
| LPF_PICK_FROM_FULL_IMAGE, |
| // Try the full image filter search with non-dual filter only. |
| LPF_PICK_FROM_FULL_IMAGE_NON_DUAL, |
| // Try a small portion of the image with different values. |
| LPF_PICK_FROM_SUBIMAGE, |
| // Estimate the level based on quantizer and frame type |
| LPF_PICK_FROM_Q, |
| // Pick 0 to disable LPF if LPF was enabled last frame |
| LPF_PICK_MINIMAL_LPF |
| } UENUM1BYTE(LPF_PICK_METHOD); |
| /*!\endcond */ |
| |
| /*!\enum CDEF_PICK_METHOD |
| * \brief This enumeration defines a variety of CDEF pick methods |
| */ |
| typedef enum { |
| CDEF_FULL_SEARCH, /**< Full search */ |
| CDEF_FAST_SEARCH_LVL1, /**< Search among a subset of all possible filters. */ |
| CDEF_FAST_SEARCH_LVL2, /**< Search reduced subset of filters than Level 1. */ |
| CDEF_FAST_SEARCH_LVL3, /**< Search reduced subset of secondary filters than |
| Level 2. */ |
| CDEF_PICK_FROM_Q, /**< Estimate filter strength based on quantizer. */ |
| CDEF_PICK_METHODS |
| } CDEF_PICK_METHOD; |
| |
| /*!\cond */ |
| enum { |
| // Terminate search early based on distortion so far compared to |
| // qp step, distortion in the neighborhood of the frame, etc. |
| FLAG_EARLY_TERMINATE = 1 << 0, |
| |
| // Skips comp inter modes if the best so far is an intra mode. |
| FLAG_SKIP_COMP_BESTINTRA = 1 << 1, |
| |
| // Skips oblique intra modes if the best so far is an inter mode. |
| FLAG_SKIP_INTRA_BESTINTER = 1 << 3, |
| |
| // Skips oblique intra modes at angles 27, 63, 117, 153 if the best |
| // intra so far is not one of the neighboring directions. |
| FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4, |
| |
| // Skips intra modes other than DC_PRED if the source variance is small |
| FLAG_SKIP_INTRA_LOWVAR = 1 << 5, |
| } UENUM1BYTE(MODE_SEARCH_SKIP_LOGIC); |
| |
| enum { |
| // No tx type pruning |
| TX_TYPE_PRUNE_0 = 0, |
| // adaptively prunes the least perspective tx types out of all 16 |
| // (tuned to provide negligible quality loss) |
| TX_TYPE_PRUNE_1 = 1, |
| // similar, but applies much more aggressive pruning to get better speed-up |
| TX_TYPE_PRUNE_2 = 2, |
| TX_TYPE_PRUNE_3 = 3, |
| // More aggressive pruning based on tx type score and allowed tx count |
| TX_TYPE_PRUNE_4 = 4, |
| TX_TYPE_PRUNE_5 = 5, |
| } UENUM1BYTE(TX_TYPE_PRUNE_MODE); |
| |
| enum { |
| // No reaction to rate control on a detected slide/scene change. |
| NO_DETECTION = 0, |
| |
| // Set to larger Q based only on the detected slide/scene change and |
| // current/past Q. |
| FAST_DETECTION_MAXQ = 1, |
| } UENUM1BYTE(OVERSHOOT_DETECTION_CBR); |
| |
| enum { |
| // Turns off multi-winner mode. So we will do txfm search on either all modes |
| // if winner mode is off, or we will only on txfm search on a single winner |
| // mode. |
| MULTI_WINNER_MODE_OFF = 0, |
| |
| // Limits the number of winner modes to at most 2 |
| MULTI_WINNER_MODE_FAST = 1, |
| |
| // Uses the default number of winner modes, which is 3 for intra mode, and 1 |
| // for inter mode. |
| MULTI_WINNER_MODE_DEFAULT = 2, |
| } UENUM1BYTE(MULTI_WINNER_MODE_TYPE); |
| |
| typedef struct { |
| TX_TYPE_PRUNE_MODE prune_2d_txfm_mode; |
| int fast_intra_tx_type_search; |
| int fast_inter_tx_type_search; |
| |
| // prune two least frequently chosen transforms for each intra mode |
| int use_reduced_intra_txset; |
| |
| // Use a skip flag prediction model to detect blocks with skip = 1 early |
| // and avoid doing full TX type search for such blocks. |
| int use_skip_flag_prediction; |
| |
| // Threshold used by the ML based method to predict TX block split decisions. |
| int ml_tx_split_thresh; |
| |
| // skip remaining transform type search when we found the rdcost of skip is |
| // better than applying transform |
| int skip_tx_search; |
| |
| // Prune tx type search using previous frame stats. |
| int prune_tx_type_using_stats; |
| // Prune tx type search using estimated RDcost |
| int prune_tx_type_est_rd; |
| |
| // Flag used to control the winner mode processing for tx type pruning for |
| // inter blocks. It enables further tx type mode pruning based on ML model for |
| // mode evaluation and disables tx type mode pruning for winner mode |
| // processing. |
| int winner_mode_tx_type_pruning; |
| #if CONFIG_IST |
| // Speed feature to disable intra secondary transform |
| int skip_stx_search; |
| #endif |
| #if CONFIG_NEW_TX_PARTITION |
| // Prunes 4way horz/vert split for intra blocks based on the |
| // result from horz and vert split. |
| int prune_intra_4way_split; |
| // Prunes 4way horz/vert split for inter blocks based on the |
| // result from horz and vert split. |
| int prune_inter_4way_split; |
| // Skip horz/vert partition based on 4way split ml model |
| int ml_tx_split_horzvert_thresh; |
| #endif // CONFIG_NEW_TX_PARTITION |
| } TX_TYPE_SEARCH; |
| |
| enum { |
| // Search partitions using RD criterion |
| SEARCH_PARTITION, |
| |
| // Always use a fixed size partition |
| FIXED_PARTITION |
| } UENUM1BYTE(PARTITION_SEARCH_TYPE); |
| |
| enum { |
| NOT_IN_USE, |
| DIRECT_PRED, |
| RELAXED_PRED, |
| ADAPT_PRED |
| } UENUM1BYTE(MAX_PART_PRED_MODE); |
| |
| enum { |
| LAST_MV_DATA, |
| CURRENT_Q, |
| QTR_ONLY, |
| } UENUM1BYTE(MV_PREC_LOGIC); |
| |
| enum { |
| SUPERRES_AUTO_ALL, // Tries all possible superres ratios |
| SUPERRES_AUTO_DUAL, // Tries no superres and q-based superres ratios |
| SUPERRES_AUTO_SOLO, // Only apply the q-based superres ratio |
| } UENUM1BYTE(SUPERRES_AUTO_SEARCH_TYPE); |
| |
| /*!\endcond */ |
| /*! |
| * \brief Sequence/frame level speed vs quality features |
| */ |
| typedef struct HIGH_LEVEL_SPEED_FEATURES { |
| /*!\cond */ |
| // Frame level coding parameter update |
| int frame_parameter_update; |
| |
| /*!\endcond */ |
| /*! |
| * Cases and frame types for which the recode loop is enabled. |
| */ |
| RECODE_LOOP_TYPE recode_loop; |
| |
| /*! |
| * Controls the tolerance vs target rate used in deciding whether to |
| * recode a frame. It has no meaning if recode is disabled. |
| */ |
| int recode_tolerance; |
| |
| /*!\cond */ |
| // Determine how motion vector precision is chosen. The possibilities are: |
| // LAST_MV_DATA: use the mv data from the last coded frame |
| // CURRENT_Q: use the current q as a threshold |
| // QTR_ONLY: use quarter pel precision only. |
| MV_PREC_LOGIC high_precision_mv_usage; |
| |
| // Always set to 0. If on it enables 0 cost background transmission |
| // (except for the initial transmission of the segmentation). The feature is |
| // disabled because the addition of very large block sizes make the |
| // backgrounds very to cheap to encode, and the segmentation we have |
| // adds overhead. |
| int static_segmentation; |
| |
| /*! |
| * Superres-auto mode search type: |
| */ |
| SUPERRES_AUTO_SEARCH_TYPE superres_auto_search_type; |
| /*!\endcond */ |
| } HIGH_LEVEL_SPEED_FEATURES; |
| |
| /*!\cond */ |
| typedef struct TPL_SPEED_FEATURES { |
| // Enable/disable GOP length adaptive decision. |
| int disable_gop_length_decision; |
| // Prune the intra modes search by tpl. |
| // If set to 0, we will search all intra modes from DC_PRED to PAETH_PRED. |
| // If set to 1, we only search DC_PRED, V_PRED, and H_PRED. |
| int prune_intra_modes; |
| // This parameter controls which step in the n-step process we start at. |
| int reduce_first_step_size; |
| // Skip motion estimation based on the precision of center MVs and the |
| // difference between center MVs. |
| // If set to 0, motion estimation is skipped for duplicate center MVs |
| // (default). If set to 1, motion estimation is skipped for duplicate |
| // full-pixel center MVs. If set to 2, motion estimation is skipped if the |
| // difference between center MVs is less than the threshold. |
| int skip_alike_starting_mv; |
| |
| // When to stop subpel search. |
| SUBPEL_FORCE_STOP subpel_force_stop; |
| |
| // Which search method to use. |
| SEARCH_METHODS search_method; |
| |
| // Prune starting mvs in TPL based on sad scores. |
| int prune_starting_mv; |
| |
| // Not run TPL for filtered Key frame. |
| int disable_filtered_key_tpl; |
| |
| // Prune reference frames in TPL. |
| int prune_ref_frames_in_tpl; |
| } TPL_SPEED_FEATURES; |
| |
| typedef struct GLOBAL_MOTION_SPEED_FEATURES { |
| // Do not compute the global motion parameters for a LAST2_FRAME or |
| // LAST3_FRAME if the GOLDEN_FRAME is closer and it has a non identity |
| // global model. |
| int selective_ref_gm; |
| |
| GM_SEARCH_TYPE gm_search_type; |
| |
| // whether to disable the global motion recode loop |
| int gm_disable_recode; |
| |
| // During global motion estimation, prune remaining reference frames in a |
| // given direction(past/future), if the evaluated ref_frame in that direction |
| // yields gm_type as INVALID/TRANSLATION/IDENTITY |
| int prune_ref_frame_for_gm_search; |
| } GLOBAL_MOTION_SPEED_FEATURES; |
| |
| typedef struct PARTITION_SPEED_FEATURES { |
| PARTITION_SEARCH_TYPE partition_search_type; |
| |
| // Used if partition_search_type = FIXED_PARTITION |
| BLOCK_SIZE fixed_partition_size; |
| |
| // Prune extended partition types search |
| // Can take values 0 - 2, 0 referring to no pruning, and 1 - 2 increasing |
| // aggressiveness of pruning in order. |
| int prune_ext_partition_types_search_level; |
| |
| // Use a ML model to prune horz and vert partitions |
| int ml_prune_rect_partition; |
| |
| // Use a ML model to prune horz_a, horz_b, vert_a and vert_b partitions. |
| int ml_prune_ab_partition; |
| |
| // Use a ML model to prune horz4 and vert4 partitions. |
| int ml_prune_4_partition; |
| |
| // Use a ML model to adaptively terminate partition search after trying |
| // PARTITION_SPLIT. Can take values 0 - 2, 0 meaning not being enabled, and |
| // 1 - 2 increasing aggressiveness in order. |
| int ml_early_term_after_part_split_level; |
| |
| // Skip rectangular partition test when partition type none gives better |
| // rd than partition type split. Can take values 0 - 2, 0 referring to no |
| // skipping, and 1 - 2 increasing aggressiveness of skipping in order. |
| int less_rectangular_check_level; |
| |
| // Use square partition only beyond this block size. |
| BLOCK_SIZE use_square_partition_only_threshold; |
| |
| // Sets min and max square partition levels for this superblock based on |
| // motion vector and prediction error distribution produced from 16x16 |
| // simple motion search |
| MAX_PART_PRED_MODE auto_max_partition_based_on_simple_motion; |
| int auto_min_partition_based_on_simple_motion; |
| |
| // Min and max square partition size we enable (block_size) as per auto |
| // min max, but also used by adjust partitioning, and pick_partitioning. |
| BLOCK_SIZE default_min_partition_size; |
| BLOCK_SIZE default_max_partition_size; |
| |
| // Sets level of adjustment of variance-based partitioning during |
| // rd_use_partition 0 - no partition adjustment, 1 - try to merge partitions |
| // for small blocks and high QP, 2 - always try to merge leaf partitions, 3 - |
| // try to merge and split leaf partitions |
| int adjust_var_based_rd_partitioning; |
| |
| // Partition search early breakout thresholds. |
| int64_t partition_search_breakout_dist_thr; |
| int partition_search_breakout_rate_thr; |
| |
| // Thresholds for ML based partition search breakout. |
| int ml_partition_search_breakout_thresh[PARTITION_BLOCK_SIZES]; |
| |
| // Allow skipping partition search for still image frame |
| int allow_partition_search_skip; |
| |
| // The aggressiveness of pruning with simple_motion_search. |
| // Currently 0 is the lowest, and 2 the highest. |
| int simple_motion_search_prune_agg; |
| |
| // Perform simple_motion_search on each possible subblock and use it to prune |
| // PARTITION_HORZ and PARTITION_VERT. |
| int simple_motion_search_prune_rect; |
| |
| // Perform simple motion search before none_partition to decide if we |
| // want to remove all partitions other than PARTITION_SPLIT. If set to 0, this |
| // model is disabled. If set to 1, the model attempts to perform |
| // PARTITION_SPLIT only. If set to 2, the model also attempts to prune |
| // PARTITION_SPLIT. |
| int simple_motion_search_split; |
| |
| // Use features from simple_motion_search to terminate prediction block |
| // partition after PARTITION_NONE |
| int simple_motion_search_early_term_none; |
| |
| // Controls whether to reduce the number of motion search steps. If this is 0, |
| // then simple_motion_search has the same number of steps as |
| // single_motion_search (assuming no other speed features). Otherwise, reduce |
| // the number of steps by the value contained in this variable. |
| int simple_motion_search_reduce_search_steps; |
| |
| // This variable controls the maximum block size where intra blocks can be |
| // used in inter frames. |
| // TODO(aconverse): Fold this into one of the other many mode skips |
| BLOCK_SIZE max_intra_bsize; |
| |
| // Use CNN with luma pixels on source frame on each of the 64x64 subblock to |
| // perform split/no_split decision on intra-frames. |
| int intra_cnn_split; |
| |
| // Disable extended partition search for lower block sizes. |
| int ext_partition_eval_thresh; |
| |
| // Prune 1:4 partition search based on winner info from split partitions |
| int prune_4_partition_using_split_info; |
| |
| // Prune AB partition search using split and HORZ/VERT info |
| int prune_ab_partition_using_split_info; |
| |
| // Terminate partition search for child partition, |
| // when NONE and SPLIT partition rd_costs are INT64_MAX. |
| int early_term_after_none_split; |
| } PARTITION_SPEED_FEATURES; |
| |
| typedef struct MV_SPEED_FEATURES { |
| // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc). |
| SEARCH_METHODS search_method; |
| |
| // Enable the use of faster, less accurate mv search method on bsize >= |
| // BLOCK_32X32. |
| // TODO(chiyotsai@google.com): Take the clip's resolution and mv activity into |
| // account. |
| int use_bsize_dependent_search_method; |
| |
| // If this is set to 1, we limit the motion search range to 2 times the |
| // largest motion vector found in the last frame. |
| int auto_mv_step_size; |
| |
| // Subpel_search_method can only be subpel_tree which does a subpixel |
| // logarithmic search that keeps stepping at 1/2 pixel units until |
| // you stop getting a gain, and then goes on to 1/4 and repeats |
| // the same process. Along the way it skips many diagonals. |
| SUBPEL_SEARCH_METHODS subpel_search_method; |
| |
| // Maximum number of steps in logarithmic subpel search before giving up. |
| int subpel_iters_per_step; |
| |
| // When to stop subpel search. |
| SUBPEL_FORCE_STOP subpel_force_stop; |
| |
| // When to stop subpel search in simple motion search. |
| SUBPEL_FORCE_STOP simple_motion_subpel_force_stop; |
| |
| // If true, sub-pixel search uses the exact convolve function used for final |
| // encoding and decoding; otherwise, it uses bilinear interpolation. |
| SUBPEL_SEARCH_TYPE use_accurate_subpel_search; |
| |
| // Threshold for allowing exhaustive motion search. |
| int exhaustive_searches_thresh; |
| |
| // Pattern to be used for any exhaustive mesh searches (except intraBC ME). |
| MESH_PATTERN mesh_patterns[MAX_MESH_STEP]; |
| |
| // Pattern to be used for exhaustive mesh searches of intraBC ME. |
| MESH_PATTERN intrabc_mesh_patterns[MAX_MESH_STEP]; |
| |
| // Reduce single motion search range based on MV result of prior ref_mv_idx. |
| int reduce_search_range; |
| |
| // Prune mesh search. |
| int prune_mesh_search; |
| |
| // Use the rd cost around the best FULLPEL_MV to speed up subpel search |
| int use_fullpel_costlist; |
| |
| // Set the full pixel search level of obmc |
| // 0: obmc_full_pixel_diamond |
| // 1: obmc_refining_search_sad (faster) |
| int obmc_full_pixel_search_level; |
| |
| // Accurate full pixel motion search based on TPL stats. |
| int full_pixel_search_level; |
| |
| // Whether to downsample the rows in sad calculation during motion search. |
| // This is only active when there are at least 16 rows. |
| int use_downsampled_sad; |
| } MV_SPEED_FEATURES; |
| |
| typedef struct INTER_MODE_SPEED_FEATURES { |
| // 2-pass inter mode model estimation where the preliminary pass skips |
| // transform search and uses a model to estimate rd, while the final pass |
| // computes the full transform search. Two types of models are supported: |
| // 0: not used |
| // 1: used with online dynamic rd model |
| // 2: used with static rd model |
| int inter_mode_rd_model_estimation; |
| |
| // Bypass transform search based on skip rd |
| int txfm_rd_gate_level; |
| |
| // Limit the inter mode tested in the RD loop |
| int reduce_inter_modes; |
| |
| // This variable is used to cap the maximum number of times we skip testing a |
| // mode to be evaluated. A high value means we will be faster. |
| int adaptive_rd_thresh; |
| |
| // Aggressively prune inter modes when best mode is skippable. |
| int prune_inter_modes_if_skippable; |
| |
| // Drop less likely to be picked reference frames in the RD search. |
| // Has five levels for now: 0, 1, 2, 3 and 4, where higher levels prune more |
| // aggressively than lower ones. (0 means no pruning). |
| int selective_ref_frame; |
| |
| // Prune reference frames for rectangular partitions. |
| // 0 implies no pruning |
| // 1 implies prune for extended partition |
| // 2 implies prune horiz, vert and extended partition |
| int prune_ref_frame_for_rect_partitions; |
| |
| #if !CONFIG_NEW_REF_SIGNALING |
| // Removed with CONFIG_NEW_REF_SIGNALING for now. |
| int alt_ref_search_fp; |
| #endif // !CONFIG_NEW_REF_SIGNALING |
| |
| // flag to skip NEWMV mode in drl if the motion search result is the same |
| int skip_repeated_newmv; |
| |
| // Skip the current ref_mv in NEW_MV mode if we have already encountered |
| // another ref_mv in the drl such that: |
| // 1. The other drl has the same fullpel_mv during the SIMPLE_TRANSLATION |
| // search process as the current fullpel_mv. |
| // 2. The rate needed to encode the current fullpel_mv is larger than that |
| // for the other ref_mv. |
| int skip_repeated_full_newmv; |
| |
| // This speed feature checks duplicate ref MVs among NEARESTMV, NEARMV, |
| // GLOBALMV and skips NEARMV or GLOBALMV (in order) if a duplicate is found |
| // TODO(any): Instead of skipping repeated ref mv, use the recalculated |
| // rd-cost based on mode rate and skip the mode evaluation |
| int skip_repeated_ref_mv; |
| |
| // Flag used to control the ref_best_rd based gating for chroma |
| int perform_best_rd_based_gating_for_chroma; |
| |
| // Reuse the inter_intra_mode search result from NEARESTMV mode to other |
| // single ref modes |
| int reuse_inter_intra_mode; |
| |
| // prune wedge and compound segment approximate rd evaluation based on |
| // compound average modeled rd |
| int prune_comp_type_by_model_rd; |
| |
| // prune wedge and compound segment approximate rd evaluation based on |
| // compound average rd/ref_best_rd |
| int prune_comp_type_by_comp_avg; |
| |
| // Skip some ref frames in compound motion search by single motion search |
| // result. Has three levels for now: 0 referring to no skipping, and 1 - 3 |
| // increasing aggressiveness of skipping in order. |
| // Note: The search order might affect the result. It assumes that the single |
| // reference modes are searched before compound modes. It is better to search |
| // same single inter mode as a group. |
| int prune_comp_search_by_single_result; |
| |
| // If 1 we iterate finding a best reference for 2 ref frames together - via |
| // a log search that iterates 4 times (check around mv for last for best |
| // error of combined predictor then check around mv for alt). If 0 we |
| // we just use the best motion vector found for each frame by itself. |
| BLOCK_SIZE comp_inter_joint_search_thresh; |
| |
| // Instead of performing a full MV search, do a simple translation first |
| // and only perform a full MV search on the motion vectors that performed |
| // well. |
| int prune_mode_search_simple_translation; |
| |
| // Only search compound modes with at least one "good" reference frame. |
| // A reference frame is good if, after looking at its performance among |
| // the single reference modes, it is one of the two best performers. |
| int prune_compound_using_single_ref; |
| |
| // Skip extended compound mode using ref frames of above and left neighbor |
| // blocks. |
| // 0 : no pruning |
| // 1 : prune extended compound mode (less aggressiveness) |
| // 2 : prune extended compound mode (high aggressiveness) |
| int prune_compound_using_neighbors; |
| |
| // Skip extended compound mode when ref frame corresponding to NEWMV does not |
| // have NEWMV as single mode winner. |
| // 0 : no pruning |
| // 1 : prune extended compound mode (less aggressiveness) |
| // 2 : prune extended compound mode (high aggressiveness) |
| int prune_comp_using_best_single_mode_ref; |
| |
| // Based on previous ref_mv_idx search result, prune the following search. |
| int prune_ref_mv_idx_search; |
| |
| // Disable one sided compound modes. |
| int disable_onesided_comp; |
| |
| // Prune/gate motion mode evaluation based on token based rd |
| // during transform search for inter blocks |
| // Values are 0 (not used) , 1 - 3 with progressively increasing |
| // aggressiveness |
| int prune_motion_mode_level; |
| |
| // Prune obmc search using previous frame stats. |
| int prune_obmc_prob_thresh; |
| |
| // Disable obmc. |
| int disable_obmc; |
| |
| // Prune warped motion search using previous frame stats. |
| int prune_warped_prob_thresh; |
| |
| // Enable/disable interintra wedge search. |
| int disable_wedge_interintra_search; |
| |
| // De-couple wedge and mode search during interintra RDO. |
| int fast_interintra_wedge_search; |
| |
| // Only enable wedge search if the variance is above this threshold. |
| unsigned int disable_wedge_search_var_thresh; |
| |
| // Whether fast wedge sign estimate is used |
| int fast_wedge_sign_estimate; |
| |
| // Whether to prune wedge search based on predictor difference |
| int prune_wedge_pred_diff_based; |
| |
| // Enable/disable ME for interinter wedge search. |
| int disable_interinter_wedge_newmv_search; |
| |
| // Enable/disable ME for interinter diffwtd search. PSNR BD-rate gain of |
| // ~0.1 on the lowres test set, but ~15% slower computation. |
| int enable_interinter_diffwtd_newmv_search; |
| |
| // Enable/disable smooth inter-intra mode |
| int disable_smooth_interintra; |
| |
| // Disable interinter_wedge |
| int disable_interinter_wedge; |
| |
| // Whether to override and disable sb level coeff cost updates, if |
| // cpi->oxcf.cost_upd_freq.coeff = COST_UPD_SB (i.e. set at SB level) |
| int disable_sb_level_coeff_cost_upd; |
| |
| // Whether to override and disable sb level mv cost updates, if |
| // cpi->oxcf.cost_upd_freq.coeff = COST_UPD_SB (i.e. set at SB level) |
| int disable_sb_level_mv_cost_upd; |
| |
| // Prune inter modes based on tpl stats |
| // 0 : no pruning |
| // 1 - 3 indicate increasing aggressiveness in order. |
| int prune_inter_modes_based_on_tpl; |
| |
| // Model based breakout after interpolation filter search |
| // 0: no breakout |
| // 1: use model based rd breakout |
| int model_based_post_interp_filter_breakout; |
| |
| // Reuse compound type rd decision when exact match is found |
| // 0: No reuse |
| // 1: Reuse the compound type decision |
| int reuse_compound_type_decision; |
| |
| // Enable/disable masked compound. |
| int disable_masked_comp; |
| } INTER_MODE_SPEED_FEATURES; |
| |
| typedef struct INTERP_FILTER_SPEED_FEATURES { |
| #if !CONFIG_REMOVE_DUAL_FILTER |
| // Do limited interpolation filter search for dual filters, since best choice |
| // usually includes EIGHTTAP_REGULAR. |
| int use_fast_interpolation_filter_search; |
| |
| // Disable dual filter |
| int disable_dual_filter; |
| |
| // skip sharp_filter evaluation based on regular and smooth filter rd for |
| // dual_filter=0 case |
| int skip_sharp_interp_filter_search; |
| |
| // adaptive interp_filter search to allow skip of certain filter types. |
| int adaptive_interp_filter_search; |
| #endif // !CONFIG_REMOVE_DUAL_FILTER |
| |
| // Save results of av1_interpolation_filter_search for a block |
| // Check mv and ref_frames before search, if they are very close with previous |
| // saved results, filter search can be skipped. |
| int use_interp_filter; |
| |
| int cb_pred_filter_search; |
| } INTERP_FILTER_SPEED_FEATURES; |
| |
| typedef struct INTRA_MODE_SPEED_FEATURES { |
| // These bit masks allow you to enable or disable intra modes for each |
| // transform size separately. |
| int intra_y_mode_mask[TX_SIZES]; |
| int intra_uv_mode_mask[TX_SIZES]; |
| |
| // flag to allow skipping intra mode for inter frame prediction |
| int skip_intra_in_interframe; |
| |
| // variance threshold for intra mode gating when inter turned out to be skip |
| // in inter frame prediction |
| unsigned int src_var_thresh_intra_skip; |
| |
| // Prune intra mode candidates based on source block histogram of gradient. |
| int intra_pruning_with_hog; |
| |
| // TODO(anyone): tune intra_pruning_with_hog_thresh for various speeds. |
| float intra_pruning_with_hog_thresh; |
| |
| // Enable/disable smooth intra modes. |
| int disable_smooth_intra; |
| |
| // prune palette search |
| // 0: No pruning |
| // 1: Perform coarse search to prune the palette colors. For winner colors, |
| // neighbors are also evaluated using a finer search. |
| // 2: Perform 2 way palette search from max colors to min colors (and min |
| // colors to remaining colors) and terminate the search if current number of |
| // palette colors is not the winner. |
| int prune_palette_search_level; |
| } INTRA_MODE_SPEED_FEATURES; |
| |
| typedef struct TX_SPEED_FEATURES { |
| // Init search depth for square and rectangular transform partitions. |
| // Values: |
| // 0 - search full tree, 1: search 1 level, 2: search the highest level only |
| int inter_tx_size_search_init_depth_sqr; |
| int inter_tx_size_search_init_depth_rect; |
| int intra_tx_size_search_init_depth_sqr; |
| int intra_tx_size_search_init_depth_rect; |
| |
| // If any dimension of a coding block size above 64, always search the |
| // largest transform only, since the largest transform block size is 64x64. |
| int tx_size_search_lgr_block; |
| |
| TX_TYPE_SEARCH tx_type_search; |
| |
| // Skip split transform block partition when the collocated bigger block |
| // is selected as all zero coefficients. |
| int txb_split_cap; |
| |
| // Shortcut the transform block partition and type search when the target |
| // rdcost is relatively lower. |
| // Values are 0 (not used) , or 1 - 2 with progressively increasing |
| // aggressiveness |
| int adaptive_txb_search_level; |
| |
| // Prune level for tx_size_type search for inter based on rd model |
| // 0: no pruning |
| // 1-2: progressively increasing aggressiveness of pruning |
| int model_based_prune_tx_search_level; |
| |
| // Use hash table to store intra(keyframe only) txb transform search results |
| // to avoid repeated search on the same residue signal. This is currently not |
| // compatible with multi-winner mode as the hash states are reset during |
| // winner mode processing. |
| int use_intra_txb_hash; |
| |
| // Use hash table to store inter txb transform search results |
| // to avoid repeated search on the same residue signal. |
| int use_inter_txb_hash; |
| |
| // Refine TX type after fast TX search. |
| int refine_fast_tx_search_results; |
| } TX_SPEED_FEATURES; |
| |
| typedef struct RD_CALC_SPEED_FEATURES { |
| // Fast approximation of av1_model_rd_from_var_lapndz |
| int simple_model_rd_from_var; |
| |
| // Whether to compute distortion in the image domain (slower but |
| // more accurate), or in the transform domain (faster but less acurate). |
| // 0: use image domain |
| // 1: use transform domain in tx_type search, and use image domain for |
| // RD_STATS |
| // 2: use transform domain |
| int tx_domain_dist_level; |
| |
| // Transform domain distortion threshold level |
| int tx_domain_dist_thres_level; |
| |
| // Trellis (dynamic programming) optimization of quantized values |
| TRELLIS_OPT_TYPE optimize_coefficients; |
| |
| // Use hash table to store macroblock RD search results |
| // to avoid repeated search on the same residue signal. |
| int use_mb_rd_hash; |
| |
| // Flag used to control the extent of coeff R-D optimization |
| int perform_coeff_opt; |
| |
| // Enable coeff R-D optimization based on SATD values. |
| // 0 : Do not disable coeff R-D opt. |
| // 1, 2 : Disable coeff R-D opt with progressively increasing aggressiveness. |
| int perform_coeff_opt_based_on_satd; |
| } RD_CALC_SPEED_FEATURES; |
| |
| typedef struct WINNER_MODE_SPEED_FEATURES { |
| // Flag used to control the winner mode processing for better R-D optimization |
| // of quantized coeffs |
| int enable_winner_mode_for_coeff_opt; |
| |
| // Flag used to control the winner mode processing for transform size |
| // search method |
| int enable_winner_mode_for_tx_size_srch; |
| |
| // Control transform size search level |
| // Eval type: Default Mode Winner |
| // Level 0 : FULL RD LARGEST ALL FULL RD |
| // Level 1 : FAST RD LARGEST ALL FULL RD |
| // Level 2 : LARGEST ALL LARGEST ALL FULL RD |
| int tx_size_search_level; |
| |
| // Flag used to control the winner mode processing for use transform |
| // domain distortion |
| int enable_winner_mode_for_use_tx_domain_dist; |
| |
| // Flag used to enable processing of multiple winner modes |
| MULTI_WINNER_MODE_TYPE multi_winner_mode_type; |
| |
| // Motion mode for winner candidates: |
| // 0: speed feature OFF |
| // 1 / 2 : Use configured number of winner candidates |
| int motion_mode_for_winner_cand; |
| |
| // Early DC only txfm block prediction |
| // 0: speed feature OFF |
| // 1 / 2 : Use the configured level for different modes |
| int dc_blk_pred_level; |
| } WINNER_MODE_SPEED_FEATURES; |
| |
| typedef struct LOOP_FILTER_SPEED_FEATURES { |
| // This feature controls how the loop filter level is determined. |
| LPF_PICK_METHOD lpf_pick; |
| |
| // Control how the CDEF strength is determined. |
| CDEF_PICK_METHOD cdef_pick_method; |
| |
| // Decoder side speed feature to add penalty for use of dual-sgr filters. |
| // Takes values 0 - 10, 0 indicating no penalty and each additional level |
| // adding a penalty of 1% |
| int dual_sgr_penalty_level; |
| |
| // prune sgr ep using binary search like mechanism |
| int enable_sgr_ep_pruning; |
| |
| // Disable loop restoration for Chroma plane |
| int disable_loop_restoration_chroma; |
| |
| // Prune RESTORE_WIENER evaluation based on source variance |
| // 0 : no pruning |
| // 1 : conservative pruning |
| // 2 : aggressive pruning |
| int prune_wiener_based_on_src_var; |
| |
| // Prune self-guided loop restoration based on wiener search results |
| // 0 : no pruning |
| // 1 : pruning based on rdcost ratio of RESTORE_WIENER and RESTORE_NONE |
| // 2 : pruning based on winner restoration type among RESTORE_WIENER and |
| // RESTORE_NONE |
| int prune_sgr_based_on_wiener; |
| |
| // Reduce the wiener filter win size for luma |
| int reduce_wiener_window_size; |
| |
| // Disable loop restoration filter |
| int disable_lr_filter; |
| } LOOP_FILTER_SPEED_FEATURES; |
| |
| /*!\endcond */ |
| |
| /*! |
| * \brief Top level speed vs quality trade off data struture. |
| */ |
| typedef struct SPEED_FEATURES { |
| /*! |
| * Sequence/frame level speed features: |
| */ |
| HIGH_LEVEL_SPEED_FEATURES hl_sf; |
| |
| /*! |
| * Speed features related to how tpl's searches are done. |
| */ |
| TPL_SPEED_FEATURES tpl_sf; |
| |
| /*! |
| * Global motion speed features: |
| */ |
| GLOBAL_MOTION_SPEED_FEATURES gm_sf; |
| |
| /*! |
| * Partition search speed features: |
| */ |
| PARTITION_SPEED_FEATURES part_sf; |
| |
| /*! |
| * Motion search speed features: |
| */ |
| MV_SPEED_FEATURES mv_sf; |
| |
| /*! |
| * Inter mode search speed features: |
| */ |
| INTER_MODE_SPEED_FEATURES inter_sf; |
| |
| /*! |
| * Interpolation filter search speed features: |
| */ |
| INTERP_FILTER_SPEED_FEATURES interp_sf; |
| |
| /*! |
| * Intra mode search speed features: |
| */ |
| INTRA_MODE_SPEED_FEATURES intra_sf; |
| |
| /*! |
| * Transform size/type search speed features: |
| */ |
| TX_SPEED_FEATURES tx_sf; |
| |
| /*! |
| * RD calculation speed features: |
| */ |
| RD_CALC_SPEED_FEATURES rd_sf; |
| |
| /*! |
| * Two-pass mode evaluation features: |
| */ |
| WINNER_MODE_SPEED_FEATURES winner_mode_sf; |
| |
| /*! |
| * In-loop filter speed features: |
| */ |
| LOOP_FILTER_SPEED_FEATURES lpf_sf; |
| } SPEED_FEATURES; |
| /*!\cond */ |
| |
| struct AV1_COMP; |
| |
| /*!\endcond */ |
| /*!\brief Frame size independent speed vs quality trade off flags |
| * |
| *\ingroup speed_features |
| * |
| * \param[in] cpi Top - level encoder instance structure |
| * \param[in] speed Speed setting passed in from the command line |
| * |
| * \return No return value but configures the various speed trade off flags |
| * based on the passed in speed setting. (Higher speed gives lower |
| * quality) |
| */ |
| void av1_set_speed_features_framesize_independent(struct AV1_COMP *cpi, |
| int speed); |
| |
| /*!\brief Frame size dependent speed vs quality trade off flags |
| * |
| *\ingroup speed_features |
| * |
| * \param[in] cpi Top - level encoder instance structure |
| * \param[in] speed Speed setting passed in from the command line |
| * |
| * \return No return value but configures the various speed trade off flags |
| * based on the passed in speed setting and frame size. (Higher speed |
| * corresponds to lower quality) |
| */ |
| void av1_set_speed_features_framesize_dependent(struct AV1_COMP *cpi, |
| int speed); |
| /*!\brief Q index dependent speed vs quality trade off flags |
| * |
| *\ingroup speed_features |
| * |
| * \param[in] cpi Top - level encoder instance structure |
| * \param[in] speed Speed setting passed in from the command line |
| * |
| * \return No return value but configures the various speed trade off flags |
| * based on the passed in speed setting and current frame's Q index. |
| * (Higher speed corresponds to lower quality) |
| */ |
| void av1_set_speed_features_qindex_dependent(struct AV1_COMP *cpi, int speed); |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // AOM_AV1_ENCODER_SPEED_FEATURES_H_ |